Adding kfree(dvb) to vidtv_bridge_remove() will remove the memory
too soon: if an application still has an open filehandle to the device
when the driver is unloaded, then when that filehandle is closed, a
use-after-free access takes place to the freed memory.
Move the kfree(dvb) to vidtv_bridge_dev_release() instead.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 76e21bb8be ("media: vidtv: Fix memory leak in remove")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Preserve the error code stored in "dev->kthread_cec" before setting it
to NULL.
Fixes: 439e520995ab ("media: vivid: add signal-free time for cec message xfer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Modify the scaler subdevice to accept setting the resolution of the source
pad (previously the source resolution would always be 3 times the sink for
both dimensions). Now any resolution can be set at src (even smaller ones)
and the sink video will be scaled to match it.
Test example: With the vimc module up (using the default vimc topology)
media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[fmt:RGB888_1X24/640x480]'
media-ctl -d platform:vimc -V '"Scaler":0[crop:(100,50)/400x150]'
media-ctl -d platform:vimc -V '"Scaler":1[fmt:RGB888_1X24/300x700]'
v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=300,height=700
v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81
v4l2-ctl --stream-mmap --stream-count=10 -z platform:vimc -d "RGB/YUV Capture" \
--stream-to=test.raw
The result will be a cropped stream that can be checked with the command
ffplay -loglevel warning -v info -f rawvideo -pixel_format rgb24 \
-video_size "300x700" test.raw
Co-developed-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Signed-off-by: Gabriela Bittencourt <gabrielabittencourt00@gmail.com>
Co-developed-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Gabriel Francisco Mandaji <gfmandaji@gmail.com>
Signed-off-by: Pedro Terra <pedro@terraco.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the vivid emulation of cec message transmission does not force
adapters to wait until the cec bus has been signal-free for a certain
number of bit periods before transmitting or re-transmitting a message.
Without enforcing the signal-free time requirements, adapters do not share
the bus very well and some messages are sent too quickly while other
messages are lost. By emulating a signal-free time and forcing adapters
to wait their turn to transmit, the vivid emulation of cec transmission
is much more reliable.
Signed-off-by: Deborah Brouwer <deborahbrouwer3563@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
remove it because SPDX-License-Identifier is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vidtv_bridge_remove() releases and cleans up everything except for dvb
itself. The patch adds this missed release.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently vivid supports the Request API, but it also sets
min_buffers_needed in the vb2 queue. But the combination of
support_requests and min_buffers_needed is not allowed due to
the fact that vb2_core_qbuf() isn't supposed to fail when called
from the request framework. And if min_buffers_needed > 0, then
is can call start_streaming() which definitely can fail.
With the new module option you can control if requests are not
allowed (min_buffers_needed is 2 in that case), optionally allowed
or are required. In the latter two cases min_buffers_needed is set
to 0.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The max number of allowed logical addresses was set to 1 in
vivid, for no good reason. This prevented testing with multiple
logical addresses for the same CEC device. Increase this number to
CEC_MAX_LOG_ADDRS.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the new vb2_queue_change_type() function in .vidioc_reqbufs and
.vidioc_create_bufs instead of changing the queue type manually in
vidioc_s_fmt_vbi_cap() and vidioc_s_fmt_sliced_vbi_cap().
This allows for a more consistent behavior, as .vidioc_reqbufs and
.vidioc_create_bufs are when the queue will become "busy".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Vivid tracks the VBI capture mode in vivid_dev->stream_sliced_vbi_cap
field. We can just look at the buffer type instead, and drop the field.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The result of container_of() operations is never NULL unless the embedded
element is the first element of the structure. This is not the case here.
The NULL check is therefore unnecessary and misleading. Remove it.
This change was made automatically with the following Coccinelle script.
@@
type t;
identifier v;
statement s;
@@
<+...
(
t v = container_of(...);
|
v = container_of(...);
)
...
when != v
- if (\( !v \| v == NULL \) ) s
...+>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The V4L2 core already zeroes fmt.sdr.reserved, so there is no need for
drivers to do the same.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This read-only int32 control is used to test read-only controls in
combination with requests. It is set by the driver to the buffer sequence
counter module 256.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The EDID had a few mistakes as reported by edid-decode:
Block 1, CTA-861 Extension Block:
Video Data Block: For improved preferred timing interoperability, set 'Native detailed modes' to 1.
Video Capability Data Block: S_PT is equal to S_IT and S_CE, so should be set to 0 instead.
Fixed those.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
'string.h' included in 'vidtv_psi.c' is duplicated.
Signed-off-by: Zhang Yunkai <zhang.yunkai@zte.com.cn>
Acked-by: Daniel Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Before the video device node is registered, the v4l2_dev.mdev
pointer must be set in order to correctly associate the video
device with the media device. Move the initialization of the
media device up.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the chroma_flags and alpha_flags are being zero'd with a bit-wise
mask and the following statement should be bit-wise or'ing in the new flag
bits but instead is making a direct assignment. Fix this by using the |=
operator rather than an assignment.
Addresses-Coverity: ("Unused value")
Fixes: ef834f7836 ("[media] vivid: add the video capture and output parts")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The media device has to be initialized and assigned to adapter->mdev
before the dvb devices are created, since that will trigger the
automatic creation of the topology.
Rework this code to achieve this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Print a message when the driver is removed so that we get some
visual confirmation when unbinding vidtv.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Change from "vidtv_bridge" to simply "vidtv" so that vidtv looks
more similar to the other media virtual drivers in /sys/bus/platform.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reinstate sysfs bind attrs so that vidtv can be bound and unbound
via sysfs. This is useful for automated regression testing in
userspace.
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add media controller support when CONFIG_MEDIA_CONTROLLER_DVB is set
so that, in the future, a test sequence in v4l-utils can be written
without having to know which /dev/fooX device should be used.
[mchehab: avoided usage of C99 comments]
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 3d1387b3b8 ("media: vidtv: fix some warnings") replaced
the unused flexible array member at the end of struct vidtv_mpeg_ts
with a pointer. This broke the 188-byte alignment since the struct
no longer was 4 bytes in size.
Fix this by removing this field entirely.
Fixes: 3d1387b3b8 ("media: vidtv: fix some warnings")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The PMT write function was refactored and this broke the CRC computation.
Fix it.
Fixes: db9569f67e ("media: vidtv: cleanup PMT write table function")
Signed-off-by: Daniel W. S. Almeida <dwlsalmeida@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When the disconnect error injection control is set, then besides
faking unregistering the device nodes, also call v4l2_event_wake_all()
to ensure any userspace applications will wake up as per a 'normal'
unregister.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----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=mi60
-----END PGP SIGNATURE-----
Merge tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- some rework at the uAPI pixel format docs
- the smiapp driver has started to gain support for MIPI CSS camera
sensors and was renamed
- two new sensor drivers: ov02a10 and ov9734
- Meson gained a driver for the 2D acceleration unit
- Rockchip rkisp1 driver was promoted from staging
- Cedrus driver gained support for VP8
- two new remote controller keymaps were added
- the usual set of fixes cleanups and driver improvements
* tag 'media/v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (447 commits)
media: ccs: Add support for obtaining C-PHY configuration from firmware
media: ccs-pll: Print pixel rates
media: ccs: Print written register values
media: ccs: Add support for DDR OP SYS and OP PIX clocks
media: ccs-pll: Add support for DDR OP system and pixel clocks
media: ccs: Dual PLL support
media: ccs-pll: Add trivial dual PLL support
media: ccs-pll: Separate VT divisor limit calculation from the rest
media: ccs-pll: Fix VT post-PLL divisor calculation
media: ccs-pll: Make VT divisors 16-bit
media: ccs-pll: Rework bounds checks
media: ccs-pll: Print relevant information on PLL tree
media: ccs-pll: Better separate OP and VT sub-tree calculation
media: ccs-pll: Check for derating and overrating, support non-derating sensors
media: ccs-pll: Split off VT subtree calculation
media: ccs-pll: Add C-PHY support
media: ccs-pll: Add sanity checks
media: ccs-pll: Add support flexible OP PLL pixel clock divider
media: ccs-pll: Support two cycles per pixel on OP domain
media: ccs-pll: Add support for extended input PLL clock divider
...
As reported by sparse:
drivers/media/test-drivers/vidtv/vidtv_ts.h:47:47: warning: array of flexible structures
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: warning: incorrect type in argument 3 (different base types)
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: expected unsigned short [usertype] service_id
drivers/media/test-drivers/vidtv/vidtv_channel.c:458:54: got restricted __be16 [usertype] service_id
drivers/media/test-drivers/vidtv/vidtv_s302m.c:471 vidtv_s302m_encoder_init() warn: possible memory leak of 'e'
Address such warnings.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The 'disconnect' error injection functionality suffered from bit rot.
New device nodes were added without updating vivid_user_gen_s_ctrl(), so
that function had to be updated for the new device nodes.
Also, vivid didn't check if specific device nodes were actually ever
created, so the vivid_is_last_user() would fail on that (it would return
true instead of false in that case).
Finally, selecting Disconnect, then unbind the vivid driver would fail
since the remove() would think that the device nodes were already
unregistered. Keep track of whether disconnect was pressed and re-register
the device nodes in remove() before doing the real unregister.
[hverkuil: unsigned uses -> unsigned int uses]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (fwht-ctrls.h).
Now, the FWHT stateless controls is ready to be part
of the stable uAPI.
While not too late:
- Rename V4L2_CID_MPEG_VIDEO_FWHT_PARAMS to V4L2_CID_STATELESS_FWHT_PARAMS.
- Move the contents of fwht-ctrls.h to v4l2-controls.h.
- Move the public parts of drivers/media/test-drivers/vicodec/codec-fwht.h
to v4l2-controls.h.
- Add V4L2_CTRL_TYPE_FWHT_PARAMS control initialization and validation.
- Add p_fwht_params to struct v4l2_ext_control.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined at the driver's code.
While not too late, let's rename them is preparation for promoting
the stateless FWHT codec API as a public API.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some functions has a different name between their prototypes
and the corresponding kernel-doc markups.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the call to vidtv_psi_pat_table_destroy frees the object
m->si.pat however m->si.pat->num_pmt is being accessed after the
free. Fix this by destroying m->si.pat after the m->si.pmt_secs[]
objects have been freed.
Addresses-Coverity: ("Read from pointer after free")
Reported-by: Cengiz Can <cengiz@kernel.wtf> # sent a similar fix about the same time
Fixes: 039b7caed1 ("media: vidtv: add a PID entry for the NIT table")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl/EM9oeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/3kH/RNkFyTlHlUkZpJx
8Ks2yWgUln7YhZcmOaG/IcIyWnhCgo3l35kiaH7XxM+rPMZzidp51MHUllaTAQDc
u+5EFHMJsmTWUfE8ocHPb1cPdYEDSoVr6QUsixbL9+uADpRz+VZVtWMb89EiyMrC
wvLIzpnqY5UNriWWBxD0hrmSsT4g9XCsauer4k2KB+zvebwg6vFOMCFLFc2qz7fb
ABsrPFqLZOMp+16chGxyHP7LJ6ygI/Hwf7tPW8ppv4c+hes4HZg7yqJxXhV02QbJ
s10s6BTcEWMqKg/T6L/VoScsMHWUcNdvrr3uuPQhgup240XdmB1XO8rOKddw27e7
VIjrjNw=
=4ZaP
-----END PGP SIGNATURE-----
Merge tag 'v5.10-rc6' into patchwork
Linux 5.10-rc6
* tag 'v5.10-rc6': (1815 commits)
Linux 5.10-rc6
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
perf probe: Change function definition check due to broken DWARF
perf probe: Fix to die_entrypc() returns error correctly
perf stat: Use proper cpu for shadow stats
perf record: Synthesize cgroup events only if needed
perf diff: Fix error return value in __cmd_diff()
perf tools: Update copy of libbpf's hashmap.c
x86/mce: Do not overwrite no_way_out if mce_end() fails
kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
KVM: x86: Fix split-irqchip vs interrupt injection window request
KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
usb: typec: stusb160x: fix power-opmode property with typec-power-opmode
printk: finalize records with trailing newlines
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
...
Avoid initializing the structs multiple times and pass the
PAT struct as a pointer, instead of a var.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Pass struct header_write_args as a pointer, instead of
passing as a var;
- Initialize the psi_args struct only once.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This function initializes the psi_args twice, and receives
a struct, instead of a pointer to a struct.
Clean it up.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cleanup the table_section_crc32_write_into() function
by initializing struct psi_write_args only once and by
passing the args as a pointer.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function vidtv_psi_ts_psi_write_into() initializes the
ts_header fields several times, and receives a struct
as argument, instead of using a pointer to struct.
Cleanup the function, in order to reduce its stack usage
and to avoid initializing the ts_header multiple times.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The current event is using an undefined date. Instead, it
should be the timestamp when the EIT table was generated.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The service_id there should be equal to the one used
on other tables, otherwise, EIT entries won't be valid.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As the service currently broadcasts just audio, change the
service type to reflect that.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On normal TS streams, the NIT table has its own entry at PAT,
but not at PMT.
While here, properly handle alloc problems when creating
PMT entries.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Hans Verkuil