This patch removes module_init()/module_exit() from driver code by using
module_misc_device() macro. All modules in this patch has a print
statement which is removed when module_misc_device() macro is used.
If undesirable this patch can be dropped entirely, this is the only
purpose of making this as a separate patch.
Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These two are confusing leftover of the old world order, combining
values of the REQ_OP_ and REQ_ namespaces. For callers that don't
special case we mostly just replace bi_rw with bio_data_dir or
op_is_write, except for the few cases where a switch over the REQ_OP_
values makes more sense. Any check for READA is replaced with an
explicit check for REQ_RAHEAD. Also remove the READA alias for
REQ_RAHEAD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The __nvm_submit_ppa() function is not used outside lightnvm core.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The passed by reference ppa list in nvm_set_rqd_list() is updated when
multiple planes are available. In that case, each PPA plane is
incremented when the device side PPA list is created. This prevents the
caller to rely on the PPA list to be unmodified after a call.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The gen_mark_blk_bad function marks the wrong block when a block is on
a different channel. Fix the index calculation, so that it updates the
correct block.
Reported-by: Javier Gonzalez <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_get_blk() function is called with rlun->lock held. This is ok
when the media manager implementation doesn't go out of its atomic
context. However, if a media manager persists its metadata, and
guarantees that the block is given to the target, this is no longer
a viable approach. Therefore, clean up the flow of rrpc_map_page,
and make sure that nvm_get_blk() is called without any locks acquired.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The [get/put]_blk API enables targets to get ownership of blocks at
runtime. This information is currently not recorded on disk, and the
information is therefore lost on power failure. To restore the
metadata, the [get/put]_blk must persist its metadata. In that case,
we need to control the outer lock, so that we can disable them while
updating the on-disk metadata. Fortunately, the _unlocked versions can
be removed, which allows us to move the lock into the [get/put]_blk
functions.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The ->list, ->open_list, and ->closed_list lists were previously used
for statistics. However, their usage have been removed, and thus these
can safely be removed.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
If a media manager tries to initialize it targets upon media manager
initialization, the media manager will need to know which target types
are available in LightNVM. The lists of which managers and target types
are available shares the same lock.
Therefore, on initialization, the nvm_lock is taken by LightNVM core,
which later leads to a deadlock when target types are enumerated by the
media manager.
Add an exclusive lock for target types to resolve this conflict.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
To enable persistent block management to easily control creation and
removal of targets, we move target management into the media
manager. The LightNVM core continues to maintain which target types are
registered, while the media manager now keeps track of its initialized
targets.
Two new callbacks for the media manager are introduced. create_tgt and
remove_tgt. Note that remove_tgt returns 0 on successfully removing a
target, and returns 1 if the target was not found.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The generic manager should be called the general media manager, and
instead of using the rather long name of "gennvm" in front of each data
structures, use "gen" instead to shorten it. Update the description of
the media manager as well to make the media manager purpose clearer.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The responsibility of the media manager is not to keep track of
open/closed blocks. This is better maintained within a target,
that already manages this information on writes.
Remove the statistics and merge the states NVM_BLK_ST_OPEN and
NVM_BLK_ST_CLOSED.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A couple of small checkpatch fixups to stop it from complaining.
./drivers/lightnvm/core.c:360: WARNING: line over 80 characters
./drivers/lightnvm/core.c:360: ERROR: trailing statements should be on
next line
./drivers/lightnvm/core.c:503: WARNING: Block comments use a trailing */
on a separate line
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Checkpatch found two incidents where the type was preferred to be
written out in full.
./drivers/lightnvm/rrpc.h:184: WARNING: Prefer 'unsigned int' to bare
use of 'unsigned'
./drivers/lightnvm/rrpc.h:209: WARNING: Prefer 'unsigned int' to bare
use of 'unsigned'
./drivers/lightnvm/rrpc.c:51: WARNING: Prefer 'unsigned int' to bare use
of 'unsigned'
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Mark functions not used by ouside of thier implementing file as static.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Expose media manager mark_blk() to targets, as done for the rest of the
media manager callback functions.
Signed-off-by: Javier González <javier@cnexlabs.com>
Updated description
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Break the loop when rqd is not null to reduce
an unnecessary schedule.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch converts the simple bi_rw use cases in the block,
drivers, mm and fs code to set/get the bio operation using
bio_set_op_attrs/bio_op
These should be simple one or two liner cases, so I just did them
in one patch. The next patches handle the more complicated
cases in a module per patch.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_dev->max_pages_per_blk variable was removed in favor of the new
nvm->sec_per_blk variable. The ->max_pages_per_blk variable was still
used in rrpc_capacity, reporting the reserved capacity to zero. Replace
with ->sec_per_blk to calculate the reserved area again.
Signed-off-by: Javier González <javier@cnexlabs.com>
Updated patch description. Was "lightnvm: eliminate redundant variable"
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The number of ppas contained on a request is not necessarily the number
of pages that it maps to neither on the target nor on the device side.
In order to avoid confusion, rename nr_pages to nr_ppas since it is what
the variable actually contains.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Targets can update a block state when having a reference to an
in-memory virtual block. In the case that a target does not keep the
block metadata in memory, it does not have a way to update this
structure.
Therefore, expose gennvm_mark_blk() through the media managers
->mark_blk() callback and let targets update the state structure through
this callback.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Targets associated with a device manager are not freed on device
removal. They have to be manually removed before shutdown. Make sure
any outstanding targets are freed upon shutdown.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
When doing GC, rrpc calculates the physical LUN to which the rrpc block
belongs too. This calculation is based on the assumption that LUNs are
assigned sequentially to the LUN list. Use the reference to the LUN
instead. This saves us the calculation and allows us to align LUNs in a
different manner to, for example, take advantage of devide parallelism.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Until now, the dma pool have been exclusively used to allocate the ppa
list being sent to the device. In pblk (upcoming), we use these pools to
allocate metadata too. Thus, we generalize the names of some variables
on the dma helper functions to make the code more readable.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
rrpc does not save any metadata on a given request. Thus, do not attempt
to free the metadata dma region.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The ppa configured for retrieving the bad block table uses the internal
lun id to setup the get bad block ppa. This increases monotonically
with the number luns available. When configuring a ppa, the channel and
lun must be specified separately, leading to an out of bound memory
access in gennvm_block_bb when lun id goes beyond the luns available
within a channel.
Additional, remove out of bound check in gennvm_block_bb(), as it was a
buggy to begin with.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The set_bb_tbl takes struct nvm_rq and only uses its ppa_list and
nr_pages internally. Instead, make these two variables explicit.
This allows a user to call it without initializing a struct nvm_rq
first.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
We move the responsibility of managing the persistent bad block table to
the target. The target may choose to mark a block bad or retry writing
to it. Never the less, it should be the target that makes the decision
and not the media manager.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A virtual block enables a block to identify multiple physical blocks.
This is useful for metadata where a device media supports multiple
planes. In that case, a block, with multiple planes can be managed
as a single vblk. Reducing the metadata required by one forth.
nvm_set_rqd_ppalist() takes care of expanding a ppa_list with vblks
automatically. However, for some use-cases, where only a single physical
block is required, the ppa_list should not be expanded.
Therefore, add a vblk parameter to nvm_set_rqd_ppalist(), and only
expand the ppa_list if vblk is set.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Now that device ops->get_bb_table no longer uses a callback, the
struct factory_blks can be removed.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The device ops->get_bb_tbl() takes a callback, that allows the caller
to use its own callback function to update its data structures in the
returning function.
This makes it difficult to send parameters to the callback, and usually
is circumvented by small private structures, that both carry the callers
state and any flags needed to fulfill the update.
Refactor ops->get_bb_tbl() to fill a data buffer with the status of the
blocks returned, and let the user call the callback function manually.
That will provide the necessary flags and data structures and simplify
the logic around ops->get_bb_tbl().
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Users that wish to iterate all luns on a device. Must create a
struct ppa_addr and separate iterators for channels and luns. To set the
iterators, two loops are required, one to iterate channels, and another
to iterate luns. This leads to decrease in readability.
Introduce nvm_for_each_lun_ppa, which implements the nested loop and
sets ppa, channel, and lun variable for each loop body, eliminating
the boilerplate code.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A target name must be unique. However, a per-device registration of
targets is maintained on a dev->online_targets list, with a per-device
search for targets upon registration.
This results in a name collision when two targets, with the same name,
are created on two different targets, where the per-device list is not
shared.
Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The functions nvm_register_target(), nvm_unregister_target() and
associated list refers to a target type that is being registered by a
target type module. Rename nvm_*_targets() to nvm_*_tgt_type(), so that
the intension is clear.
This enables target instances to use the _nvm_*_targets() naming.
Signed-off-by: Simon A. F. Lund <slund@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since we mainly use soffset in device sector size, we therefore store
this value in rrpc->soffset, instead of the offset in 512byte sector
size. This eliminates the "(ilog2(dev->sec_size) - 9)" calculation on
each I/O.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Updated patch description.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Calculate rrpc total blocks and sectors up front, make sense
to use them. For example, we use rrpc->nr_sects to calculate rrpc
area size, but it makes no sense if we don't initialize it up front,
since it would be zero until we finish rrpc luns init.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
A memory leak occurs if the lower page table is initialized and the
following dev->lun_map fails on allocation.
Rearrange the initialization of lower page table to allow dev->lun_map
to fail gracefully without memory leak.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Move kfree of dev->lun_map to nvm_free()
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The get block table command returns a list of blocks and planes
with their associated state. Users, such as gennvm and sysblk,
manages all planes as a single virtual block.
It was therefore natural to fold the bad block list before it is
returned. However, to allow users, which manages on a per-plane
block level, to also use the interface, the get_bb_tbl interface is
changed to not fold by default and instead let the caller fold if
necessary.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The flash page size (fpg) and size across planes (pfpg) are convenient
to know when allocating buffer sizes. This has previously been a
calculated in various places. Replace with the pre-calculated values.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The nvm_submit_ppa function assumes that users manage all plane
blocks as a single block. Extend the API with nvm_submit_ppa_list
to allow the user to send its own ppa list. If the user submits more
than a single PPA, the user must take care to allocate and free
the corresponding ppa list.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The device ->submit_io() callback might fail to submit I/O to device.
In that case, the nvm_submit_ppa function should not wait for
completion. Instead return the ->submit_io() error.
Reviewed by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
This fixes the following warnings:
drivers/lightnvm/sysblk.c:125:9: warning: ‘ret’ may be used
uninitialized in this function
drivers/lightnvm/sysblk.c:275:15: warning: ‘ret’ may be used
uninitialized in this function
In both cases, ret is only set from within a loop that may not be entered.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
An Open-Channel SSD can work on two modes: (i) hybrid mode, where the
L2P table is maintained both by the host and by the device; and (ii)
full host-based, where the L2P table is uniquely maintained by the host.
In the advent of a new target implementing the full host-based mode, do
not assume that the L2P table must be loaded on the generic media
manager; check device properties loaded on the identify command instead.
Signed-off-by: Javier González <javier@cnexlabs.com>
Moved into the following statement.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
When the l2p table is loaded, addresses are checked for the lun they
belong to and luns are reserved accordingly. This assumes that metadata
is being stored in the backend device to recover the previous target
configuration. Since this is not yet implemented, this check collides
with some of the core initialization (e.g., sysblock initialization when
a page is formed by several sectors).
We take this check out and for now rely on that the right target will be
created instead. When metadata is stored to recover a target, this check
will come natural as part of the recovery strategy.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add a bitmap of luns to indicate the status
of luns: inuse/available. When create targets
do the necessary check to avoid allocating luns
that are already allocated.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Freed dev->lun_map if nvm_core_init later failed in the init process.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can create more than one target on a lightnvm
device by specifying its begin lun and end lun.
But only specify the physical address area is not
enough, we need to get the corresponding non-
intersection logical address area division from
the backend device's logcial address space.
Otherwise the targets on the device might use
the same logical addresses cause incorrect
information in the device's l2p table.
Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block driver updates from Jens Axboe:
"This is the block driver pull request for this merge window. It sits
on top of for-4.6/core, that was just sent out.
This contains:
- A set of fixes for lightnvm. One from Alan, fixing an overflow,
and the rest from the usual suspects, Javier and Matias.
- A set of fixes for nbd from Markus and Dan, and a fixup from Arnd
for correct usage of the signed 64-bit divider.
- A set of bug fixes for the Micron mtip32xx, from Asai.
- A fix for the brd discard handling from Bart.
- Update the maintainers entry for cciss, since that hardware has
transferred ownership.
- Three bug fixes for bcache from Eric Wheeler.
- Set of fixes for xen-blk{back,front} from Jan and Konrad.
- Removal of the cpqarray driver. It has been disabled in Kconfig
since 2013, and we were initially scheduled to remove it in 3.15.
- Various updates and fixes for NVMe, with the most important being:
- Removal of the per-device NVMe thread, replacing that with a
watchdog timer instead. From Christoph.
- Exposing the namespace WWID through sysfs, from Keith.
- Set of cleanups from Ming Lin.
- Logging the controller device name instead of the underlying
PCI device name, from Sagi.
- And a bunch of fixes and optimizations from the usual suspects
in this area"
* 'for-4.6/drivers' of git://git.kernel.dk/linux-block: (49 commits)
NVMe: Expose ns wwid through single sysfs entry
drivers:block: cpqarray clean up
brd: Fix discard request processing
cpqarray: remove it from the kernel
cciss: update MAINTAINERS
NVMe: Remove unused sq_head read in completion path
bcache: fix cache_set_flush() NULL pointer dereference on OOM
bcache: cleaned up error handling around register_cache()
bcache: fix race of writeback thread starting before complete initialization
NVMe: Create discard zero quirk white list
nbd: use correct div_s64 helper
mtip32xx: remove unneeded variable in mtip_cmd_timeout()
lightnvm: generalize rrpc ppa calculations
lightnvm: remove struct nvm_dev->total_blocks
lightnvm: rename ->nr_pages to ->nr_sects
lightnvm: update closed list outside of intr context
xen/blback: Fit the important information of the thread in 17 characters
lightnvm: fold get bb tbl when using dual/quad plane mode
lightnvm: fix up nonsensical configure overrun checking
xen-blkback: advertise indirect segment support earlier
...
In rrpc, some calculations assume a certain configuration (e.g., 1 LUN,
1 sector per page). The reason behind this was that LightNVM used a
simple configuration with QEMU to test core features in the beginning.
This patch relaxes these assumptions and generalizes calculation,
allowing multiple luns to be used.
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The struct nvm_dev->total_blocks was only used for calculating total
sectors. Remove and instead calculate total sectors from the number of
luns and its sectors.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The struct rrpc->nr_pages can easily be interpreted as the number of
flash pages allocated to rrpc, while it is the nr_sects. Make sure that
this is reflected from the variable name.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
PrasannaKumar Muralidharan