Enable support for HDMI LPE audio mode on Baytrail and
Cherrytrail when HDaudio controller is not detected
Setup minimum required resources during i915_driver_load:
1. Create a platform device to share MMIO/IRQ resources
2. Make the platform device child of i915 device for runtime PM.
3. Create IRQ chip to forward HDMI LPE audio irqs.
HDMI LPE audio driver (a standalone sound driver) probes the
LPE audio device and creates a new sound card.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Jerome Anand <jerome.anand@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An error in the condition for avoiding the call to intel_hpd_poll_init()
for valleyview and cherryview from intel_runtime_suspend() caused it to
be called unconditionally. Fix it.
Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484922525-6131-2-git-send-email-ander.conselvan.de.oliveira@intel.com
(cherry picked from commit 04313b00b7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The GPU may be in an unknown state following resume and module load. The
previous occupant may have left contexts loaded, or other dangerous
state, which can cause an immediate GPU hang for us. The only save
course of action is to reset the GPU prior to using it - similarly to
how we reset the GPU prior to unload (before a second user may be
affected by our leftover state).
We need to reset the GPU very early in our load/resume sequence so that
any stale HW pointers are revoked prior to any resource allocations we
make (that may conflict).
A reset should only be a couple of milliseconds on a slow device, a cost
we should easily be able to absorb into our initialisation times.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124110135.6418-2-chris@chris-wilson.co.uk
In order to reset the GPU early on in the module load sequence, we need
to allocate the basic engine structs (to populate the mmio offsets etc).
Currently, the engine initialisation allocates both the base struct and
also allocate auxiliary objects, which depend upon state setup quite
late in the load sequence. We split off the allocation callback for
later and allow ourselves to allocate the engine structs themselves
early.
v2: Different paint for the unwind following error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170124110135.6418-1-chris@chris-wilson.co.uk
An error in the condition for avoiding the call to intel_hpd_poll_init()
for valleyview and cherryview from intel_runtime_suspend() caused it to
be called unconditionally. Fix it.
Fixes: 19625e85c6 ("drm/i915: Enable polling when we don't have hpd")
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Lyude <cpaul@redhat.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484922525-6131-2-git-send-email-ander.conselvan.de.oliveira@intel.com
This patch will allow for getparams to return the status of the HuC.
As the HuC has to be validated by the GuC this patch uses the validated
status to show when the HuC is loaded and ready for use. You cannot use
the loaded status as with the GuC as the HuC is verified after it is
loaded and is not usable until it is verified.
v2: removed the forewakes as the registers are already force-woken.
(T.Ursulin)
v3: rebased on top of drm-tip. Removed any reference to intel_huc.h
v4: rebased. Rename I915_PARAM_HAS_HUC to I915_PARAM_HUC_STATUS.
Remove intel_is_huc_valid() since it is used only in one place.
Put the case of I915_PARAM_HAS_HUC() in the right place.
v5: rebased. Add a comment to specify that I915_READ(reg)
does not read garbage value. The register HUC_STATUS2 is force
woken and no rpm is needed.
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-6-git-send-email-anusha.srivatsa@intel.com
The HuC loading process is similar to GuC. The intel_uc_fw_fetch()
is used for both cases.
HuC loading needs to be before GuC loading. The WOPCM setting must
be done early before loading any of them.
v2: rebased on-top of drm-intel-nightly.
removed if(HAS_GUC()) before the guc call. (D.Gordon)
update huc_version number of format.
v3: rebased to drm-intel-nightly, changed the file name format to
match the one in the huc package.
Changed dev->dev_private to to_i915()
v4: moved function back to where it was.
change wait_for_atomic to wait_for.
v5: rebased. Changed the year in the copyright message to reflect
the right year.Correct the comments,remove the unwanted WARN message,
replace drm_gem_object_unreference() with i915_gem_object_put().Make the
prototypes in intel_huc.h non-extern.
v6: rebased. Update the file construction done by HuC. It is similar to
GuC.Adopted the approach used in-
https://patchwork.freedesktop.org/patch/104355/ <Tvrtko Ursulin>
v7: Change dev to dev_priv in macro definition.
Corrected comments.
v8: rebased on top of drm-tip. Updated functions intel_huc_load(),
intel_huc_init() and intel_uc_fw_fetch() to accept dev_priv instead of
dev. Moved contents of intel_huc.h to intel_uc.h.
v9: change SKL_FW_ to SKL_HUC_FW_. Add intel_ prefix to guc_wopcm_size().
Remove unwanted checks in intel_uc.h. Rename huc_fw in struct intel_huc to
simply fw to avoid redundency.
v10: rebased. Correct comments. Make intel_huc_fini() accept dev_priv
instead of dev like intel_huc_init() and intel_huc_load().Move definition
to i915_guc_reg.h from intel_uc.h. Clean DMA_CTRL bits after HuC DMA
transfer in huc_ucode_xfer() instead of guc_ucode_xfer(). Add suitable
WARNs to give extra info.
v11: rebased. Add proper bias for HuC and make sure there are
asserts on failure by using guc_ggtt_offset_vma(). Introduce
intel_huc.c and remove intel_huc_loader.c since it has functions that
do more than just loading.Correct year in copyright.
v12: remove invalidates that are not required anymore.
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Tested-by: Xiang Haihao <haihao.xiang@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Alex Dai <yu.dai@intel.com>
Signed-off-by: Peter Antoine <peter.antoine@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484755558-1234-1-git-send-email-anusha.srivatsa@intel.com
If we can't recover the GPU after the reset, mark it as wedged to cancel
the outstanding tasks and to prevent new users from trying to use the
broken GPU.
v2: Check the same ring is hung again before declaring the reset broken.
v3: use engine_stalled (Mika)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-6-git-send-email-mika.kuoppala@intel.com
Now that we have prepare/finish routines for the GEM reset, move the
disabling of the engine->irq_tasklet into them to reduce repetition. The
device irq enable/disable is split out to ensure it is run first and
last always (even if the GPU reset fails).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1484668747-9120-1-git-send-email-mika.kuoppala@intel.com
Functions supporting GuC logging capabilities were spread across
many files, with unnecessary exposures and mixed with unrelated
code. Dedicate file will make maintenance of all GuC functions
easier as more functions are coming to support GuC submissions.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170113174157.104492-1-michal.wajdeczko@intel.com
Since commit c033666a94 ("drm/i915: Store a i915 backpointer from
engine, and use it") i915_reset receives dev_priv, but the kerneldoc
was not updated.
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170112041817.1102-3-michel.thierry@intel.com
The fence registers are clobbered by a GPU reset. If there is concurrent
user access to a fenced region via a GTT mmaping, the access will not be
fenced during the reset (until we restore the fences afterwards). In order
to prevent invalid access during the reset, before we clobber the fences
first we must invalidate the GTT mmapings. Access to the mmap will then
be forced to fault in the page, and in handling the fault, i915_gem_fault()
will take the struct_mutex and wait upon the reset to complete.
v2: Fix up commentary.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99274
Testcase: igt/gem_mmap_gtt/hang
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104145110.1486-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
The idle work handler is self-arming - if it detects that it needs to
run again it will queue itself from its work handler. Take greater care
when trying to drain the idle work, and double check that it is flushed.
The free worker has a similar issue where it is armed by an RCU task
which may be running concurrently with us.
This should hopefully help with the sporadic WARN_ON(dev_priv->gt.awake)
from i915_gem_suspend.
v2: Reuse drain_freed_objects.
v3: Don't try to flush the freed objects from the shrinker, as it may be
underneath the struct_mutex already.
v4: do while and comment upon the excess rcu_barrier in drain_freed_objects
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161223145804.6605-2-chris@chris-wilson.co.uk
Display Workarounds #1135
If IPC is enabled in BXT, display underruns are observed.
WA: The Line Time programmed in the WM_LINETIME register should be
half of the actual calculated Line Time.
Programmed Line Time = 1/2*Calculated Line Time
Changes since V1:
- Add Workaround number in commit & code
Changes since V2 (from Paulo):
- Bikeshed white space and make the WA tag look like the others
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-3-mahesh1.kumar@intel.com
Each DSPARB register can house bits for two separate pipes, hence
we must protect the registers during reprogramming so that parallel
FIFO reconfigurations happening simultaneosly on multiple pipes won't
corrupt each others values.
We'll use a new spinlock for this instead of the wm_mutex since we'll
have to move the DSPARB programming to happen from the vblank evade
critical section, and we can't use mutexes in there.
v2: Document why we use a spinlock instead of a mutex (Maarten)
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480947208-18468-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
dev_priv is more appropriate since it is used much more in these.
v2: Commit message and keep the local pdev variable. (Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since it does not need dev at all.
Also change the stored pointer in struct i915_error_state_file_priv
to i915.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Simplify the code by passing the right argument in.
v2: Commit message. (Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
They are only used in i915_drv.c so a forward declaration is enough.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
dev_priv is more appropriate for these so converting saves
some lines of source.
v2: Commit message and keep the pdev local variable. (Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Simplifies the code to pass the right parameter in.
v2: Commit message. (Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Like GEM init, GUC init, MOCS init and context creation.
Enables them to lose dev_priv locals.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
For LSPCON initialization during system resume we need AUX
functionality, but we call the corresponding encoder reset hook with all
interrupts disabled. Without interrupts we'll do a poll-wait for AUX
transfer completions, which adds a significant delay if the transfers
timeout/need to be retried for some reason.
Fix this by enabling interrupts before calling the reset hooks. Note
that while this will enable AUX interrupts it will keep HPD interrupts
disabled, in a similar way to the init time output setup code.
This issue existed since LSPCON support was added.
v2:
- Rebased on drm-tip.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1480448429-27739-1-git-send-email-imre.deak@intel.com
Since
commit 44adece57e
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Aug 10 18:52:34 2016 +0200
drm/fb-helper: Add a dummy remove_conflicting_framebuffers
the drm helpers take care of this for us.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161130110131.25668-1-daniel.vetter@ffwll.ch
send_mutex is used to serialise communication with GuC via
intel_guc_send().
Since functions that utilize it are no longer limited to submission,
initialization should be handled as a part of general setup.
v2: move initialization to *_early()
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480096777-12573-5-git-send-email-arkadiusz.hiler@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Pass dev_priv to intel_setup_outputs() and functions called by it, since
those are all intel i915 specific functions. Also, in the majority of
the functions dev_priv is used more often than dev. In the rare cases
where there are a few calls back into drm core, a local dev variable was
added.
v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville)
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com
If the gpu reset fails and the machine is terminally wedged, further
hangchecks achieve nothing but noise. Disable them, with a corollary
that we re-enable hangchecking after a successful GPU reset in case the
user is artificially bringing the machine back to life through the debug
interface.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161122144121.7379-2-chris@chris-wilson.co.uk
Each metric set is given a sysfs entry like:
/sys/class/drm/card0/metrics/<guid>/id
This allows userspace to enumerate the specific sets that are available
for the current system. The 'id' file contains an unsigned integer that
can be used to open the associated metric set via
DRM_IOCTL_I915_PERF_OPEN. The <guid> is a globally unique ID for a
specific OA unit register configuration that can be reliably used by
userspace as a key to lookup corresponding counter meta data and
normalization equations.
The guid registry is currently maintained as part of gputop along with
the XML metric set descriptions and code generation scripts, ref:
https://github.com/rib/gputop
> gputop-data/guids.xml
> scripts/update-guids.py
> gputop-data/oa-*.xml
> scripts/i915-perf-kernelgen.py
$ make -C gputop-data -f Makefile.xml SYSFS=1 WHITELIST=RenderBasic
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-8-robert@sixbynine.org
Adds base i915 perf infrastructure for Gen performance metrics.
This adds a DRM_IOCTL_I915_PERF_OPEN ioctl that takes an array of uint64
properties to configure a stream of metrics and returns a new fd usable
with standard VFS system calls including read() to read typed and sized
records; ioctl() to enable or disable capture and poll() to wait for
data.
A stream is opened something like:
uint64_t properties[] = {
/* Single context sampling */
DRM_I915_PERF_PROP_CTX_HANDLE, ctx_handle,
/* Include OA reports in samples */
DRM_I915_PERF_PROP_SAMPLE_OA, true,
/* OA unit configuration */
DRM_I915_PERF_PROP_OA_METRICS_SET, metrics_set_id,
DRM_I915_PERF_PROP_OA_FORMAT, report_format,
DRM_I915_PERF_PROP_OA_EXPONENT, period_exponent,
};
struct drm_i915_perf_open_param parm = {
.flags = I915_PERF_FLAG_FD_CLOEXEC |
I915_PERF_FLAG_FD_NONBLOCK |
I915_PERF_FLAG_DISABLED,
.properties_ptr = (uint64_t)properties,
.num_properties = sizeof(properties) / 16,
};
int fd = drmIoctl(drm_fd, DRM_IOCTL_I915_PERF_OPEN, ¶m);
Records read all start with a common { type, size } header with
DRM_I915_PERF_RECORD_SAMPLE being of most interest. Sample records
contain an extensible number of fields and it's the
DRM_I915_PERF_PROP_SAMPLE_xyz properties given when opening that
determine what's included in every sample.
No specific streams are supported yet so any attempt to open a stream
will return an error.
v2:
use i915_gem_context_get() - Chris Wilson
v3:
update read() interface to avoid passing state struct - Chris Wilson
fix some rebase fallout, with i915-perf init/deinit
v4:
s/DRM_IORW/DRM_IOW/ - Emil Velikov
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107194957.3385-2-robert@sixbynine.org
Started with removing INTEL_INFO(dev) and cascaded into a quite
big trickle of function prototype changes. Still, I think it is
for the better.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tvrtko needs
commit b3c11ac267
Author: Eric Engestrom <eric@engestrom.ch>
Date: Sat Nov 12 01:12:56 2016 +0000
drm: move allocation out of drm_get_format_name()
to be able to apply his patches without conflicts.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
After this patch only conversion of INTEL_INFO(p)->gen to
INTEL_GEN(dev_priv) remains before the __I915__ macro can
be removed.
v2: Tidy vlv_compute_wm. (David Weinehall)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over
* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
drm/i915: Restrict DRM_DEBUG_MM automatic selection
drm: Restrict stackdepot usage to builtin drm.ko
drm/msm: module param to dump state on error irq
drm/msm/mdp5: add atomic_print_state support
drm/atomic: add debugfs file to dump out atomic state
drm/atomic: add new drm_debug bit to dump atomic state
drm: add helpers to go from plane state to drm_rect
drm: add helper for printing to log or seq_file
drm: helper macros to print composite types
reservation: revert "wait only with non-zero timeout specified (v3)" v2
drm/ttm: fix ttm_bo_wait
dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
drm/amdgpu: add the interface of waiting multiple fences (v4)
dma-buf: return index of the first signaled fence (v2)
MAINTAINERS: update Sync File Framework files
dma-buf/sw_sync: put fence reference from the fence creation
dma-buf/sw_sync: mark sync_timeline_create() static
drm: Add stackdepot include for DRM_DEBUG_MM
...
Now that we don't run the connector reprobing from i915_drm_resume(), we
need to make it so we don't have to wait for reprobing to finish so that
we actually speed things up. In order to do this, we need to make sure
that i915_drm_resume() doesn't get blocked by i915_hpd_poll_init_work()
while trying to acquire the mode_config lock that
drm_kms_helper_poll_enable() needs to acquire.
The easiest way to do this is to just enable polling before hpd. This
shouldn't break anything since at that point we have everything else we
need for polling enabled.
As well, this should result in a rather significant improvement in how
quickly we can resume the system.
Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
Weine's investigation on benchmarking the suspend/resume process pointed
out a lot of the time in suspend/resume is being spent reprobing. While
the reprobing process is a lengthy one for good reason, we don't need to
hold up the entire suspend/resume process while we wait for it to
finish. Luckily as it turns out, we already trigger a full connector
reprobe in i915_hpd_poll_init_work(), so we can just ditch reprobing in
i915_drm_resume() entirely.
This won't lead to less time spent resuming just yet since now the
bottleneck will be waiting for the mode_config lock in
drm_kms_helper_poll_enable(), since that will be held as long as
i915_hpd_poll_init_work() is reprobing all of the connectors. But we'll
address that in the next patch.
Signed-off-by: Lyude <lyude@redhat.com>
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Testcase: analyze_suspend.py -config config/suspend-callgraph.cfg -filter i915
Create new file for hangcheck specific code, intel_hangcheck.c,
and move all related code in it.
v2: s/intel_engine_hangcheck/intel_engine (Chris)
No functional changes.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478018583-5816-1-git-send-email-mika.kuoppala@intel.com
Due to the plane->index not getting readjusted in drm_plane_cleanup(),
we can't continue initialization of some plane/crtc init fails.
Well, we sort of could I suppose if we left all initialized planes on
the list, but that would expose those planes to userspace as well.
But for crtcs the situation is even worse since we assume that
pipe==crtc index occasionally, so we can't really deal with a partially
initialize set of crtcs.
So seems safest to just abort the entire thing if anything goes wrong.
All the failure paths here are kmalloc()s anyway, so it seems unlikely
we'd get very far if these start failing.
v2: Add (enum plane) case to silence gcc
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477411083-19255-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Our timelines are more than just a seqno. They also provide an ordered
list of requests to be executed. Due to the restriction of handling
individual address spaces, we are limited to a timeline per address
space but we use a fence context per engine within.
Our first step to introducing independent timelines per context (i.e. to
allow each context to have a queue of requests to execute that have a
defined set of dependencies on other requests) is to provide a timeline
abstraction for the global execution queue.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-23-chris@chris-wilson.co.uk
Having moved the locked phase of freeing an object to a separate worker,
we can now declare to the core that we only need the unlocked variant of
driver->gem_free_object, and can use the simple unreference internally.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-20-chris@chris-wilson.co.uk
We want to hide the latency of releasing objects and their backing
storage from the submission, so we move the actual free to a worker.
This allows us to switch to struct_mutex freeing of the object in the
next patch.
Furthermore, if we know that the object we are dereferencing remains valid
for the duration of our access, we can forgo the usual synchronisation
barriers and atomic reference counting. To ensure this we defer freeing
an object til after an RCU grace period, such that any lookup of the
object within an RCU read critical section will remain valid until
after we exit that critical section. We also employ this delay for
rate-limiting the serialisation on reallocation - we have to slow down
object creation in order to prevent resource starvation (in particular,
files).
v2: Return early in i915_gem_tiling() ioctl to skip over superfluous
work on error.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161028125858.23563-19-chris@chris-wilson.co.uk
Added a new debugfs interface '/sys/kernel/debug/dri/guc_log' for the
User to capture GuC firmware logs. Availed relay framework to implement
the interface, where Driver will have to just use a relay API to store
snapshots of the GuC log buffer in the buffer managed by relay.
The snapshot will be taken when GuC firmware sends a log buffer flush
interrupt and up to four snapshots could be stored in the relay buffer.
The relay buffer will be operated in a mode where it will overwrite the
data not yet collected by User.
Besides mmap method, through which User can directly access the relay
buffer contents, relay also supports the 'poll' method. Through the 'poll'
call on log file, User can come to know whenever a new snapshot of the
log buffer is taken by Driver, so can run in tandem with the Driver and
capture the logs in a sustained/streaming manner, without any loss of data.
v2: Defer the creation of relay channel & associated debugfs file, as
debugfs setup is now done at the end of i915 Driver load. (Chris)
v3:
- Switch to no-overwrite mode for relay.
- Fix the relay sub buffer switching sequence.
v4:
- Update i915 Kconfig to select RELAY config. (TvrtKo)
- Log a message when there is no sub buffer available to capture
the GuC log buffer. (Tvrtko)
- Increase the number of relay sub buffers to 8 from 4, to have
sufficient buffering for boot time logs
v5:
- Fix the alignment, indentation issues and some minor cleanup. (Tvrtko)
- Update the comment to elaborate on why a relay channel has to be
associated with the debugfs file. (Tvrtko)
v6:
- Move the write to 'is_global' after the NULL check on parent directory
dentry pointer. (Tvrtko)
v7: Add a BUG_ON to validate relay buffer allocation size. (Chris)
Testcase: igt/tools/intel_guc_logger
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sourab Gupta <sourab.gupta@intel.com>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
At the moment, we have dependency on the RPM as a barrier itself in both
i915_gem_release_all_mmaps() and i915_gem_restore_fences().
i915_gem_restore_fences() is also called along !runtime pm paths, but we
can move the markup of lost fences alongside releasing the mmaps into a
common i915_gem_runtime_suspend(). This has the advantage of locating
all the tricky barrier dependencies into one location.
v2: Just mark the fence as invalid (fence->dirty) so that upon waking we
will be sure to clear the fence after use, or restore it to the correct
value before use. This makes sure that if the fence is left intact
across the sleep, we do not leave it pointing to a region of GTT for the
next unsuspecting user.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Imre Deak <imre.deak@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-5-chris@chris-wilson.co.uk
We can remove the false coupling between RPM and struct mutex by the
observation that we can use the RPM wakeref as the barrier around user
mmap access. That is as we tear down the user's PTE atomically from
within rpm suspend and then to fault in new PTE requires the rpm
wakeref, means that no user access is possible through those PTE without
RPM being awake. Having made that observation, we can then remove the
presumption of having to take rpm outside of struct_mutex and so allow
fine grained acquisition of a wakeref around hw access rather than
having to remember to acquire the wakeref early on.
v2: Rejig placement of the new intel_runtime_pm_get() to be as tight
as possible around the GTT pread/pwrite.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161024124218.18252-2-chris@chris-wilson.co.uk
After printing our welcome message to the user, also include
supplementary details on what debugging is enabled (useful for us to
sanity check what extra safeguards are on for any random kernel).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161014132707.29039-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com
Currently the display INIT power domain disabling/enabling happens in a
mismatched way in the suspend/resume_early hooks respectively. This can
leave display power wells incorrectly disabled in the resume hook if the
suspend sequence is aborted for some reason resulting in the
suspend/resume hooks getting called but the suspend_late/resume_early
hooks being skipped. In particular this change fixes "Unclaimed read
from register 0x1e1204" on BYT/BSW triggered from i915_drm_resume()->
intel_pps_unlock_regs_wa() when suspending with /sys/power/pm_test set
to devices.
Fixes: 85e9067933 ("drm/i915: disable power wells on suspend")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: David Weinehall <david.weinehall@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476358446-11621-1-git-send-email-imre.deak@intel.com
Saves 864 bytes of .rodata strings and ~100 of .text.
v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Rebase.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Saves 1392 bytes of .rodata strings.
Also change a few function/macro prototypes in i915_gem_gtt.c
from dev to dev_priv where it made more sense to do so.
v2: Add parantheses around dev_priv. (Ville Syrjala)
v3: Mention function prototype changes. (David Weinehall)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
With the possibility of addition of many more number of rings in future,
the drm_i915_private structure could bloat as an array, of type
intel_engine_cs, is embedded inside it.
struct intel_engine_cs engine[I915_NUM_ENGINES];
Though this is still fine as generally there is only a single instance of
drm_i915_private structure used, but not all of the possible rings would be
enabled or active on most of the platforms. Some memory can be saved by
allocating intel_engine_cs structure only for the enabled/active engines.
Currently the engine/ring ID is kept static and dev_priv->engine[] is simply
indexed using the enums defined in intel_engine_id.
To save memory and continue using the static engine/ring IDs, 'engine' is
defined as an array of pointers.
struct intel_engine_cs *engine[I915_NUM_ENGINES];
dev_priv->engine[engine_ID] will be NULL for disabled engine instances.
There is a text size reduction of 928 bytes, from 1028200 to 1027272, for
i915.o file (but for i915.ko file text size remain same as 1193131 bytes).
v2:
- Remove the engine iterator field added in drm_i915_private structure,
instead pass a local iterator variable to the for_each_engine**
macros. (Chris)
- Do away with intel_engine_initialized() and instead directly use the
NULL pointer check on engine pointer. (Chris)
v3:
- Remove for_each_engine_id() macro, as the updated macro for_each_engine()
can be used in place of it. (Chris)
- Protect the access to Render engine Fault register with a NULL check, as
engine specific init is done later in Driver load sequence.
v4:
- Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris)
- Kill the superfluous init_engine_lists().
v5:
- Cleanup the intel_engines_init() & intel_engines_setup(), with respect to
allocation of intel_engine_cs structure. (Chris)
v6:
- Rebase.
v7:
- Optimize the for_each_engine_masked() macro. (Chris)
- Change the type of 'iter' local variable to enum intel_engine_id. (Chris)
- Rebase.
v8: Rebase.
v9: Rebase.
v10:
- For index calculation use engine ID instead of pointer based arithmetic in
intel_engine_sync_index() as engine pointers are not contiguous now (Chris)
- For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas)
- Use for_each_engine macro for cleanup in intel_engines_init() and remove
check for NULL engine pointer in cleanup() routines. (Joonas)
v11: Rebase.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Akash Goel <akash.goel@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
Currently resuming on HSW from S3 pm_test/devices state leads to an
unrecoverable GPU hang. Resetting the GPU during suspend fixes this. For
a full S3 cycle this change only means the reset happens earlier (before
reaching S3). For S4 the reset will happen now both during the freeze
and quiesce phases, which is a benefit since it will guarantee that the
GPU is idle before creating and loading the hibernation image.
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1476283597-580-1-git-send-email-imre.deak@intel.com
Whilst we reset the GPU, we want to prevent execlists from submitting
new work (which it does via an interrupt handler). To achieve this we
disable the irq (and drain the irq tasklet) around the reset. When we
enable it again afters, the interrupt queue should be empty and we can
reinitialise from a known state without fear of the tasklet running
concurrently.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-4-chris@chris-wilson.co.uk
We just removed the implementation for all the pre-production
workarounds, so now tell the user that we expect his machine to not
work properly. Also convert this to DRM_ERROR so we can more easily
spot these problems in bug reports and CI/QA runs.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474891672-23414-2-git-send-email-jani.nikula@intel.com
Following commit 821ed7df6e ("drm/i915: Update reset path to fix
incomplete requests") we no longer mark the context as lost on reset as
we keep the requests (and contexts) alive. However, RPS remains reset
and we need to restore the current state to match the in-flight
requests.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97824
Fixes: 821ed7df6e ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160921135108.29574-1-chris@chris-wilson.co.uk
Update reset path in preparation for engine reset which requires
identification of incomplete requests and associated context and fixing
their state so that engine can resume correctly after reset.
The request that caused the hang will be skipped and head is reset to the
start of breadcrumb. This allows us to resume from where we left-off.
Since this request didn't complete normally we also need to cleanup elsp
queue manually. This is vital if we employ nonblocking request
submission where we may have a web of dependencies upon the hung request
and so advancing the seqno manually is no longer trivial.
ABI: gem_reset_stats / DRM_IOCTL_I915_GET_RESET_STATS
We change the way we count pending batches. Only the active context
involved in the reset is marked as either innocent or guilty, and not
mark the entire world as pending. By inspection this only affects
igt/gem_reset_stats (which assumes implementation details) and not
piglit.
ARB_robustness gives this guide on how we expect the user of this
interface to behave:
* Provide a mechanism for an OpenGL application to learn about
graphics resets that affect the context. When a graphics reset
occurs, the OpenGL context becomes unusable and the application
must create a new context to continue operation. Detecting a
graphics reset happens through an inexpensive query.
And with regards to the actual meaning of the reset values:
Certain events can result in a reset of the GL context. Such a reset
causes all context state to be lost. Recovery from such events
requires recreation of all objects in the affected context. The
current status of the graphics reset state is returned by
enum GetGraphicsResetStatusARB();
The symbolic constant returned indicates if the GL context has been
in a reset state at any point since the last call to
GetGraphicsResetStatusARB. NO_ERROR indicates that the GL context
has not been in a reset state since the last call.
GUILTY_CONTEXT_RESET_ARB indicates that a reset has been detected
that is attributable to the current GL context.
INNOCENT_CONTEXT_RESET_ARB indicates a reset has been detected that
is not attributable to the current GL context.
UNKNOWN_CONTEXT_RESET_ARB indicates a detected graphics reset whose
cause is unknown.
The language here is explicit in that we must mark up the guilty batch,
but is loose enough for us to relax the innocent (i.e. pending)
accounting as only the active batches are involved with the reset.
In the future, we are looking towards single engine resetting (with
minimal locking), where it seems inappropriate to mark the entire world
as innocent since the reset occurred on a different engine. Reducing the
information available means we only have to encounter the pain once, and
also reduces the information leaking from one context to another.
v2: Legacy ringbuffer submission required a reset following hibernation,
or else we restore stale values to the RING_HEAD and walked over
stolen garbage.
v3: GuC requires replaying the requests after a reset.
v4: Restore engine IRQ after reset (so waiters will be woken!)
Rearm hangcheck if resetting with a waiter.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-13-chris@chris-wilson.co.uk
Since we have a cooperative mode now with a direct reset, we can avoid
the contention on struct_mutex and instead try then sleep on the
I915_RESET_IN_PROGRESS bit. If the mutex is held and that bit is
cleared, all is fine. Otherwise, we sleep for a bit and try again. In
the worst case we sleep for an extra second waiting for the mutex to be
released (no one touching the GPU is allowed the struct_mutex whilst the
I915_RESET_IN_PROGRESS bit is set). But when we have a direct reset,
this allows us to clean up the reset worker faster.
v2: Remember to call wake_up_bit() after changing (for the faster wakeup
as promised)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-12-chris@chris-wilson.co.uk
If a waiter is holding the struct_mutex, then the reset worker cannot
reset the GPU until the waiter returns. We do not want to return -EAGAIN
form i915_wait_request as that breaks delicate operations like
i915_vma_unbind() which often cannot be restarted easily, and returning
-EIO is just as useless (and has in the past proven dangerous). The
remaining WARN_ON(i915_wait_request) serve as a valuable reminder that
handling errors from an indefinite wait are tricky.
We can keep the current semantic that knowing after a reset is complete,
so is the request, by performing the reset ourselves if we hold the
mutex.
uevent emission is still handled by the reset worker, so it may appear
slightly out of order with respect to the actual reset (and concurrent
use of the device).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-11-chris@chris-wilson.co.uk
In preparation for introducing a per-engine reset, we can first separate
the mixing of the reset state from the global reset counter.
The loss of atomicity in updating the reset state poses a small problem
for handling the waiters. For requests, this is solved by advancing the
seqno so that a waiter waking up after the reset knows the request is
complete. For pending flips, we still rely on the increment of the
global reset epoch (as well as the reset-in-progress flag) to signify
when the hardware was reset.
The advantage, now that we do not inspect the reset state during reset
itself i.e. we no longer emit requests during reset, is that we can use
the atomic updates of the state flags to ensure that only one reset
worker is active.
v2: Mika spotted that I transformed the i915_gem_wait_for_error() wakeup
into a waiter wakeup.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Arun Siluvery <arun.siluvery@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470414607-32453-6-git-send-email-arun.siluvery@linux.intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160909131201.16673-7-chris@chris-wilson.co.uk
In an upcoming patch we'll need the actual mask of subslices in addition
to their count, so convert the subslice_per_slice field to a mask.
Also we can easily calculate subslice_total from the other fields, so
instead of storing a cached version of this, add a helper to calculate
it.
v2:
- Use hweight8() on u8 typed vars instead of hweight32(). (Ben)
Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Move all slice/subslice/eu related properties to the sseu_dev_info
struct.
No functional change.
v2:
- s/info/sseu/ based on the new struct name. (Ben)
Reviewed-by: Robert Bragg <robert@sixbynine.org> (v1)
Reviewed-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Tested-by: Ben Widawsky <benjamin.widawsky@intel.com> (v1)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Rather than having a separate case for each value where we just return
a hardcoded value = 1, we lump them all together and rely on the awesome
case-fallthrough feature of C.
Fix all feature macros to pass dev_priv instead of dev while at it,
and use INTEL_GEN() instead of INTEL_INFO()->gen.
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160902104617.29089-1-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Now that we have working partial VMA and faulting support for all
objects, including fence support, advertise to userspace that it can
take advantage of unlimited GGTT mmaps.
v2: Make room in the kerneldoc for a more detailed explanation of the
limitations of the GTT mmap interface.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20160825180519.11341-1-chris@chris-wilson.co.uk
A side effect of removing the midlayer from driver loading was the loss
of a useful message announcing to userspace that i915 had successfully
started, e.g.:
[drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
Reported-by: Timo Aaltonen <tjaalton@ubuntu.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 8f460e2c78 ("drm/i915: Demidlayer driver loading")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Link: http://patchwork.freedesktop.org/patch/msgid/20160825072314.17402-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In order for the RC6 autoenable worker to take any action, RC6 first
must be disabled. Upon resume or reset, the sw state may be stale and so
we require a forced restore.
Fixes: b7137e0cf1 ("drm/i915: Defer enabling rc6 til after we submit...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160824092701.19178-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Just like with sysfs, we do some major overhaul.
Pass dev_priv instead of dev to all feature macros (IS_, HAS_,
INTEL_, etc.). This has the side effect that a bunch of functions
now get dev_priv passed instead of dev.
All calls to INTEL_INFO()->gen have been replaced with
INTEL_GEN().
We want access to to_i915(node->minor->dev) in a lot of places,
so add the node_to_i915() helper to accommodate for this.
Finally, we have quite a few cases where we get a void * pointer,
and need to cast it to drm_device *, only to run to_i915() on it.
Add cast_to_i915() to do this.
v2: Don't introduce extra dev (Chris)
v3: Make pipe_crc_info have a pointer to drm_i915_private instead of
drm_device. This saves a bit of space, since we never use
drm_device anywhere in these functions.
Also some minor fixup that I missed in the previous version.
v4: Changed the code a bit so that dev_priv is passed directly
to various functions, thus removing the need for the
cast_to_i915() helper. Also did some additional cleanup.
v5: Additional cleanup of newly introduced changes.
v6: Rebase again because of conflict.
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822105931.pcbe2lpsgzckzboa@boom
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
In an effort to simplify things for a future push of dev_priv instead
of dev wherever possible, always take pdev via dev_priv where
feasible, eliminating the direct access from dev. Right now this
only eliminates a few cases of dev, but it also obviates that we pass
dev into a lot of functions where dev_priv would be the more obvious
choice.
v2: Fixed one more place missing in the previous patch set
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-5-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Various cleanup for i915_sysfs.c; we now use dev_priv whenever
possible. The kdev_to_drm_minor() helper function has been
replaced by one that converts from struct device *
to struct drm_i915_private *.
We already have a seemingly identical helper (kdev_to_i915())
in i915_drv.h. But that one cannot be used here.
Unlike the version in i915_drv.h, this helper
reaches i915 through drm_minor.
v2: Rename kdev_to_i915_dm() to kdev_minor_to_i915() (Chris)
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-4-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We currently have a mix of struct device *device, struct device *kdev,
and struct device *dev (the latter forcing us to refer to
struct drm_device as something else than the normal dev).
To simplify things, always use kdev when referring to struct device.
v2: Replace the dev_to_drm_minor() macro with the inline function
kdev_to_drm_minor().
Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160822103245.24069-3-david.weinehall@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by Chris Wilson.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
- refactor ddi buffer programming a bit (Ville)
- large-scale renaming to untangle naming in the gem code (Chris)
- rework vma/active tracking for accurately reaping idle mappings of shared
objects (Chris)
- misc dp sst/mst probing corner case fixes (Ville)
- tons of cleanup&tunings all around in gem
- lockless (rcu-protected) request lookup, plus use it everywhere for
non(b)locking waits (Chris)
- pipe crc debugfs fixes (Rodrigo)
- random fixes all over
* tag 'drm-intel-next-2016-08-08' of git://anongit.freedesktop.org/drm-intel: (222 commits)
drm/i915: Update DRIVER_DATE to 20160808
drm/i915: fix aliasing_ppgtt leak
drm/i915: Update comment before i915_spin_request
drm/i915: Use drm official vblank_no_hw_counter callback.
drm/i915: Fix copy_to_user usage for pipe_crc
Revert "drm/i915: Track active streams also for DP SST"
drm/i915: fix WaInsertDummyPushConstPs
drm/i915: Assert that the request hasn't been retired
drm/i915: Repack fence tiling mode and stride into a single integer
drm/i915: Document and reject invalid tiling modes
drm/i915: Remove locking for get_tiling
drm/i915: Remove pinned check from madvise ioctl
drm/i915: Reduce locking inside swfinish ioctl
drm/i915: Remove (struct_mutex) locking for busy-ioctl
drm/i915: Remove (struct_mutex) locking for wait-ioctl
drm/i915: Do a nonblocking wait first in pread/pwrite
drm/i915: Remove unused no-shrinker-steal
drm/i915: Tidy generation of the GTT mmap offset
drm/i915/shrinker: Wait before acquiring struct_mutex under oom
drm/i915: Simplify do_idling() (Ironlake vt-d w/a)
...
This patch provides the infrastructure for performing a 16-byte aligned
read from WC memory using non-temporal instructions introduced with sse4.1.
Using movntdqa we can bypass the CPU caches and read directly from memory
and ignoring the page attributes set on the CPU PTE i.e. negating the
impact of an otherwise UC access. Copying using movntdqa from WC is almost
as fast as reading from WB memory, modulo the possibility of both hitting
the CPU cache or leaving the data in the CPU cache for the next consumer.
(The CPU cache itself my be flushed for the region of the movntdqa and on
later access the movntdqa reads from a separate internal buffer for the
cacheline.) The write back to the memory is however cached.
This will be used in later patches to accelerate accessing WC memory.
v2: Report whether the accelerated copy is successful/possible.
v3: Function alignment override was only necessary when using the
function target("sse4.1") - which is not necessary for emitting movntdqa
from __asm__.
v4: Improve notes on CPU cache behaviour vs non-temporal stores.
v5: Fix byte offsets for unrolled moves.
v6: Find all remaining typos of "movntqda", use kernel_fpu_begin.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Akash Goel <akash.goel@intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471001999-17787-2-git-send-email-chris@chris-wilson.co.uk
Lots of drivers don't properly compile without this when CONFIG_FB=n.
It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when
it's disabled I think it makes sense to add it to drm_fb_helper.h.
Long term we probably need to rethink all the logic to unload firmware
framebuffer drivers, at least if we want to be able to move away from
CONFIG_FB and fbcon.
v2: Unfortunately just stubbing out remove_conflicting_framebuffers in
drm_fb_helper.h upset gcc about static vs. non-static declarations, so
a new wrapper it needs to be. Means more churn :(
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: tomi.valkeinen@ti.com
Cc: dh.herrmann@gmail.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch
Atm, we apply this workaround somewhat inconsistently at the following
points: driver loading, LVDS init, eDP PPS init, system resume. As this
workaround also affects registers other than PPS (timing, PLL) a more
consistent way is to apply it early after the PPS HW context is known to
be lost: driver loading, system resume and on VLV/CHV/BXT when turning
on power domains.
This is needed by the next patch that removes saving/restoring of the
PP_CONTROL register.
This also removes the incorrect programming of the workaround on HSW+
PCH platforms which don't have the register locking mechanism.
v2: (Ville)
- Don't apply the workaround on BXT.
- Simplify platform checks using HAS_DDI().
v3:
- Move the call of intel_pps_unlock_regs_wa() to the more
logical vlv_display_power_well_init() (also fixing CHV) (Ville).
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470827254-21954-5-git-send-email-imre.deak@intel.com
In order to prevent a leak of the vma on shared objects, we need to
hook into the object_close callback to destroy the vma on the object for
this file. However, if we destroyed that vma immediately we may cause
unexpected application stalls as we try to unbind a busy vma - hence we
defer the unbind to when we retire the vma.
v2: Keep vma allocated until closed. This is useful for a later
optimisation, but it is required now in order to handle potential
recursion of i915_vma_unbind() by retiring itself.
v3: Comments are important.
Testcase: igt/gem_ppggtt/flink-and-close-vma-leak
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-26-git-send-email-chris@chris-wilson.co.uk
Initialising the global GTT is tricky as we wish to use the drm_mm range
manager during the modesetting initialisation (to capture stolen
allocations from the BIOS) before we actually enable GEM. To overcome
this, we currently setup the drm_mm first and then carefully rebind
them.
v2: Fixup after rebasing
v3: GGTT initialisation needs to be split around kicking out conflicts
v4: Restore an old UMS BUG_ON(mappable > total) as a DRM_ERROR plus
fixup of probe results.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-4-git-send-email-chris@chris-wilson.co.uk
Since these are internal functions they operate on drm_i915_private and
not the drm_device being passed in. So pass in the drm_i915_private
instead, and remove one layer of dancing. No space wins here, just
conforming to the norm in function parameters.
v2: Include all the probe functions
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-3-git-send-email-chris@chris-wilson.co.uk
In order to handle conflicting drivers (i.e. vgacon) having a different
setup of hardware, we have to remove those other drivers before we try
to setup our own mappings. This requires us to split GGTT initialisation
between probing for the hardware location (part of the PCI BAR) and
later establishing the kernel resources for it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470293567-10811-2-git-send-email-chris@chris-wilson.co.uk
Now that PCU communication is reasonably fast, we do not need to defer
RC6 initialisation to a workqueue.
References: https://bugs.freedesktop.org/show_bug.cgi?id=97017
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Jerome Anand