Makes the dash in front of option '-z' disappear in the generated
man-page.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20210506140352.4178789-1-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To integrate with logrotate, we have a signal handler that will re-open
the logfile.
Assuming we have a systemd unit file with
ExecStart=kvm_stat -dtc -s 10 -L /var/log/kvm_stat.csv
ExecReload=/bin/kill -HUP $MAINPID
and a logrotate config featuring
postrotate
/bin/systemctl reload kvm_stat.service
endscript
Then the overall flow will look like this:
(1) systemd starts kvm_stat, logging to A.
(2) At some point, logrotate runs, moving A to B.
kvm_stat continues to write to B at this point.
(3) After rotating, logrotate restarts the kvm_stat unit via systemctl.
(4) The kvm_stat unit sends a SIGHUP to kvm_stat, finally making it
switch over to writing to A again.
Note that in order to keep the structure of the cvs output in tact, we
make sure to, in contrast to the standard log format, only write the
header once at the beginning of a file. This implies that the header is
suppressed when appending to an existing file. Unlike with the standard
format, where we append to an existing file by starting out with a
header.
Signed-off-by: Stefan Raspl <raspl@de.ibm.com>
Message-Id: <20200402085705.61155-3-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When running in logging mode, skip records with all zeros (=empty records)
to preserve space when logging to files.
Signed-off-by: Stefan Raspl <raspl@de.ibm.com>
Message-Id: <20200402085705.61155-2-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an alternative format that can be more easily used for further
processing later on.
Note that we add a timestamp in the first column for both, the regular
and the new csv format.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-5-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This now controls both, the refresh rate of the interactive mode as well
as the logging mode. Which, as a consequence, means that the default of
logging mode is now 3s, too (use command line switch '-s' to adjust to
your liking).
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-4-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make sure command line arguments are sorted alphabetically
everywhere, and adjusted existing texts for interactive command 's' to
become consistent with the long form --set-delay.
Throwing in some PEP8 fixes (all cosmetics) for good measure.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Message-Id: <20200306114250.57585-2-raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The fields filter would not work with child fields, as the respective
parents would not be included. No parents displayed == no childs displayed.
To reproduce, run on s390 (would work on other platforms, too, but would
require a different filter name):
- Run 'kvm_stat -d'
- Press 'f'
- Enter 'instruct'
Notice that events like instruction_diag_44 or instruction_diag_500 are not
displayed - the output remains empty.
With this patch, we will filter by matching events and their parents.
However, consider the following example where we filter by
instruction_diag_44:
kvm statistics - summary
regex filter: instruction_diag_44
Event Total %Total CurAvg/s
exit_instruction 276 100.0 12
instruction_diag_44 256 92.8 11
Total 276 12
Note that the parent ('exit_instruction') displays the total events, but
the childs listed do not match its total (256 instead of 276). This is
intended (since we're filtering all but one child), but might be confusing
on first sight.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We can do with a single dialog that takes both, pids and guest names.
Note that we keep both interactive commands, 'p' and 'g' for now, to
avoid confusion among users used to a specific key.
While at it, we improve on some minor glitches regarding curses usage,
e.g. cursor still visible when not supposed to be.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The man page update for this new functionality was omitted.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Child trace events were included in calculation of the overall total,
which is used for calculation of the percentages of the '%Total' column.
However, the parent trace envents' stats summarize the child trace
events, hence we'd incorrectly account for them twice, leading to
slightly wrong stats.
With this fix, we use the correct total. Consequently, the sum of the
child trace events' '%Total' column values is identical to the
respective value of the respective parent event. However, this also
means that the sum of the '%Total' column values will aggregate to more
than 100 percent.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Toggle display total number of events by guest (debugfs only).
When switching to display of events by guest, field filters remain
active. I.e. the number of events per guest reported considers only
events matching the filters. Likewise with pid/guest filtering.
Note that when switching to display of events by guest, DebugfsProvider
remains to collect data for events as it did before, but the read()
method summarizes the values by pid.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It might be handy to display the full history of event stats to compare
the current event distribution against any available historic data.
Since we have that available for debugfs, we offer a respective command
line option to display what's available.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new interactive command 'o' to toggle sorting by 'CurAvg/s' (default)
and 'Total' columns.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add new command 's' to modify the update interval. Limited to a maximum of
25.5 sec and a minimum of 0.1 sec, since curses cannot handle longer
and shorter delays respectively.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Display interactive commands reference on 'h'.
While at it, sort interactive commands alphabetically in various places.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Provide an interactive command to reset the tracepoint statistics.
Requires some extra work for debugfs, as the counters cannot be reset.
On the up side, this offers us the opportunity to have debugfs values
reset on startup and whenever a filter is modified, becoming consistent
with the tracepoint provider. As a bonus, 'kvmstat -dt' will now provide
useful output, instead of mixing values in totally different orders of
magnitude.
Furthermore, we avoid unnecessary resets when any of the filters is
"changed" interactively to the previous value.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Provide a real simple way to erase any active filter.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Add a new option '-g'/'--guest' to select a particular process by providing
the QEMU guest name.
Notes:
- The logic to figure out the pid corresponding to the guest name might look
scary, but works pretty reliably in practice; in the unlikely event that it
returns add'l flukes, it will bail out and hint at using '-p' instead, no
harm done.
- Mixing '-g' and '-p' is possible, and the final instance specified on the
command line is the significant one. This is consistent with current
behavior for '-p' which, if specified multiple times, also regards the final
instance as the significant one.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Apart from the source code, there does not seem to be a place that documents
the interactive capabilities of kvm_stat yet.
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Having stats for single VMs can help to determine the problem of a VM
without the need of running other tools like perf.
The tracepoints already allowed pid level monitoring, but kvm_stat
didn't have support for it till now. Support for the newly implemented
debugfs vm monitoring was also implemented.
Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Converted from the Texinfo source in QEMU to asciidoc. The a2x
incantation was provided by Janosch Frank.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stefan Raspl