commit 9d2fd8bdc12f403a5c35c971936a0e1d5cb5108e upstream.
Since the signature self-test uses RSA and SHA-256, it must only be
enabled when those algorithms are enabled. Otherwise it fails and
panics the kernel on boot-up.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404221528.51d75177-lkp@intel.com
Fixes: 3cde3174eb ("certs: Add FIPS selftests")
Cc: stable@vger.kernel.org
Cc: Simo Sorce <simo@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcaa86b904ea3761e62c849957dd0904e126bf4a upstream.
Make ASYMMETRIC_PUBLIC_KEY_SUBTYPE select CRYPTO_SIG to avoid build
errors like the following, which were possible with
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y && CONFIG_CRYPTO_SIG=n:
ld: vmlinux.o: in function `public_key_verify_signature':
(.text+0x306280): undefined reference to `crypto_alloc_sig'
ld: (.text+0x306300): undefined reference to `crypto_sig_set_pubkey'
ld: (.text+0x306324): undefined reference to `crypto_sig_verify'
ld: (.text+0x30636c): undefined reference to `crypto_sig_set_privkey'
Fixes: 63ba4d6759 ("KEYS: asymmetric: Use new crypto interface without scatterlists")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 04a93202ed7c3b451bf22d3ff4bcd379df27f299 ]
The modular build fails because the self-test code depends on pkcs7
which in turn depends on x509 which contains the self-test.
Split the self-test out into its own module to break the cycle.
Fixes: 3cde3174eb ("certs: Add FIPS selftests")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
The selftest code is built into the x509_key_parser module, and depends
on the pkcs7_message_parser module, which in turn has a dependency on
the key parser, creating a dependency loop and a resulting link
failure when the pkcs7 code is a loadable module:
ld: crypto/asymmetric_keys/selftest.o: in function `fips_signature_selftest':
crypto/asymmetric_keys/selftest.c:205: undefined reference to `pkcs7_parse_message'
ld: crypto/asymmetric_keys/selftest.c:209: undefined reference to `pkcs7_supply_detached_data'
ld: crypto/asymmetric_keys/selftest.c:211: undefined reference to `pkcs7_verify'
ld: crypto/asymmetric_keys/selftest.c:215: undefined reference to `pkcs7_validate_trust'
ld: crypto/asymmetric_keys/selftest.c:219: undefined reference to `pkcs7_free_message'
Avoid this by only allowing the selftest to be enabled when either
both parts are loadable modules, or both are built-in.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Add some selftests for signature checking when FIPS mode is enabled. These
need to be done before we start actually using the signature checking for
things and must panic the kernel upon failure.
Note that the tests must not check the blacklist lest this provide a way to
prevent a kernel from booting by installing a hash of a test key in the
appropriate UEFI table.
Reported-by: Simo Sorce <simo@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Link: https://lore.kernel.org/r/165515742832.1554877.2073456606206090838.stgit@warthog.procyon.org.uk/
asym_tpm keys are tied to TPM v1.2, which uses outdated crypto and has
been deprecated in favor of TPM v2.0 for over 7 years. A very quick
look at this code also immediately found some memory safety bugs
(https://lore.kernel.org/r/20220113235440.90439-2-ebiggers@kernel.org).
Note that this code is reachable by unprivileged users.
According to Jarkko (one of the keyrings subsystem maintainers), this
code has no practical use cases, and he isn't willing to maintain it
(https://lore.kernel.org/r/YfFZPbKkgYJGWu1Q@iki.fi).
Therefore, let's remove it.
Note that this feature didn't have any documentation or tests, so we
don't need to worry about removing those.
Cc: David Howells <dhowells@redhat.com>
Cc: Denis Kenzior <denkenz@gmail.com>
Cc: James Morris <jmorris@namei.org>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Build testing with some core crypto options disabled revealed
a few modules that are missing CRYPTO_HASH:
crypto/asymmetric_keys/x509_public_key.o: In function `x509_get_sig_params':
x509_public_key.c:(.text+0x4c7): undefined reference to `crypto_alloc_shash'
x509_public_key.c:(.text+0x5e5): undefined reference to `crypto_shash_digest'
crypto/asymmetric_keys/pkcs7_verify.o: In function `pkcs7_digest.isra.0':
pkcs7_verify.c:(.text+0xab): undefined reference to `crypto_alloc_shash'
pkcs7_verify.c:(.text+0x1b2): undefined reference to `crypto_shash_digest'
pkcs7_verify.c:(.text+0x3c1): undefined reference to `crypto_shash_update'
pkcs7_verify.c:(.text+0x411): undefined reference to `crypto_shash_finup'
This normally doesn't show up in randconfig tests because there is
a large number of other options that select CRYPTO_HASH.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch exposes some common functionality needed to send TPM commands.
Several functions from keys/trusted.c are exposed for use by the new tpm
key subtype and a module dependency is introduced.
In the future, common functionality between the trusted key type and the
asym_tpm subtype should be factored out into a common utility library.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
For TPM based keys, the only standard seems to be described here:
http://david.woodhou.se/draft-woodhouse-cert-best-practice.html#rfc.section.4.4
Quote from the relevant section:
"Rather, a common form of storage for "wrapped" keys is to encode the
binary TCPA_KEY structure in a single ASN.1 OCTET-STRING, and store the
result in PEM format with the tag "-----BEGIN TSS KEY BLOB-----". "
This patch implements the above behavior. It is assumed that the PEM
encoding is stripped out by userspace and only the raw DER/BER format is
provided. This is similar to how PKCS7, PKCS8 and X.509 keys are
handled.
Signed-off-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: James Morris <james.morris@microsoft.com>
Implement PKCS#8 RSA Private Key format [RFC 5208] parser for the
asymmetric key type. For the moment, this will only support unencrypted
DER blobs. PEM and decryption can be added later.
PKCS#8 keys can be loaded like this:
openssl pkcs8 -in private_key.pem -topk8 -nocrypt -outform DER | \
keyctl padd asymmetric foo @s
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Tested-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- missing selection in public_key that may result in a build failure
- Potential crash in error path in omap-sham
- ccp AES XTS bug that affects requests larger than 4096"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix AES XTS error for request sizes above 4096
crypto: public_key: select CRYPTO_AKCIPHER
crypto: omap-sham - potential Oops on error in probe
In some rare randconfig builds, we can end up with
ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled,
which fails to link because of the reference to crypto_alloc_akcipher:
crypto/built-in.o: In function `public_key_verify_signature':
:(.text+0x110e4): undefined reference to `crypto_alloc_akcipher'
This adds a Kconfig 'select' statement to ensure the dependency
is always there.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Make the system trusted keyring depend on the asymmetric key type as
there's not a lot of point having it if you can't then load asymmetric keys
onto it.
This requires the ASYMMETRIC_KEY_TYPE to be made a bool, not a tristate, as
the Kconfig language doesn't then correctly force ASYMMETRIC_KEY_TYPE to
'y' rather than 'm' if SYSTEM_TRUSTED_KEYRING is 'y'.
Making SYSTEM_TRUSTED_KEYRING *select* ASYMMETRIC_KEY_TYPE instead doesn't
work as the Kconfig interpreter then wrongly complains about dependency
loops.
Signed-off-by: David Howells <dhowells@redhat.com>
Generalise system_verify_data() to provide access to internal content
through a callback. This allows all the PKCS#7 stuff to be hidden inside
this function and removed from the PE file parser and the PKCS#7 test key.
If external content is not required, NULL should be passed as data to the
function. If the callback is not required, that can be set to NULL.
The function is now called verify_pkcs7_signature() to contrast with
verify_pefile_signature() and the definitions of both have been moved into
linux/verification.h along with the key_being_used_for enum.
Signed-off-by: David Howells <dhowells@redhat.com>
Move the RSA EMSA-PKCS1-v1_5 encoding from the asymmetric-key public_key
subtype to the rsa crypto module's pkcs1pad template. This means that the
public_key subtype no longer has any dependencies on public key type.
To make this work, the following changes have been made:
(1) The rsa pkcs1pad template is now used for RSA keys. This strips off the
padding and returns just the message hash.
(2) In a previous patch, the pkcs1pad template gained an optional second
parameter that, if given, specifies the hash used. We now give this,
and pkcs1pad checks the encoded message E(M) for the EMSA-PKCS1-v1_5
encoding and verifies that the correct digest OID is present.
(3) The crypto driver in crypto/asymmetric_keys/rsa.c is now reduced to
something that doesn't care about what the encryption actually does
and and has been merged into public_key.c.
(4) CONFIG_PUBLIC_KEY_ALGO_RSA is gone. Module signing must set
CONFIG_CRYPTO_RSA=y instead.
Thoughts:
(*) Should the encoding style (eg. raw, EMSA-PKCS1-v1_5) also be passed to
the padding template? Should there be multiple padding templates
registered that share most of the code?
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch converts the module verification code to the new akcipher API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David Howells <dhowells@redhat.com>
You can select MPILIB_EXTRA all you want, it doesn't exist ;-)
Surprised kconfig doesn't complain about that...
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Parse a PE binary to find a key and a signature contained therein. Later
patches will check the signature and add the key if the signature checks out.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Implement a parser for a PKCS#7 signed-data message as described in part of
RFC 2315.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
The RSA public key algorithm needs to select MPILIB directly in Kconfig as the
'select' directive is not recursive and is thus MPILIB is not enabled by
selecting MPILIB_EXTRA.
Without this, the following errors can occur:
crypto/built-in.o: In function `RSA_verify_signature':
rsa.c:(.text+0x1d347): undefined reference to `mpi_get_nbits'
rsa.c:(.text+0x1d354): undefined reference to `mpi_get_nbits'
rsa.c:(.text+0x1d36e): undefined reference to `mpi_cmp_ui'
rsa.c:(.text+0x1d382): undefined reference to `mpi_cmp'
rsa.c:(.text+0x1d391): undefined reference to `mpi_alloc'
rsa.c:(.text+0x1d3b0): undefined reference to `mpi_powm'
rsa.c:(.text+0x1d3c3): undefined reference to `mpi_free'
rsa.c:(.text+0x1d3d8): undefined reference to `mpi_get_buffer'
rsa.c:(.text+0x1d4d4): undefined reference to `mpi_free'
rsa.c:(.text+0x1d503): undefined reference to `mpi_get_nbits'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
This patch makes use of the newly defined common hash algorithm info,
replacing, for example, PKEY_HASH with HASH_ALGO.
Changelog:
- Lindent fixes - Mimi
CC: David Howells <dhowells@redhat.com>
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Move the public-key algorithm pointer array from x509_public_key.c to
public_key.c as it isn't X.509 specific.
Note that to make this configure correctly, the public key part must be
dependent on the RSA module rather than the other way round. This needs a
further patch to make use of the crypto module loading stuff rather than using
a fixed table.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Josh Boyer <jwboyer@redhat.com>
Add a crypto key parser for binary (DER) encoded X.509 certificates. The
certificate is parsed and, if possible, the signature is verified.
An X.509 key can be added like this:
# keyctl padd crypto bar @s </tmp/x509.cert
15768135
and displayed like this:
# cat /proc/keys
00f09a47 I--Q--- 1 perm 39390000 0 0 asymmetri bar: X509.RSA e9fd6d08 []
Note that this only works with binary certificates. PEM encoded certificates
are ignored by the parser.
Note also that the X.509 key ID is not congruent with the PGP key ID, but for
the moment, they will match.
If a NULL or "" name is given to add_key(), then the parser will generate a key
description from the CertificateSerialNumber and Name fields of the
TBSCertificate:
00aefc4e I--Q--- 1 perm 39390000 0 0 asymmetri bfbc0cd76d050ea4:/C=GB/L=Cambridge/O=Red Hat/CN=kernel key: X509.RSA 0c688c7b []
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Implement RSA public key cryptography [PKCS#1 / RFC3447]. At this time, only
the signature verification algorithm is supported. This uses the asymmetric
public key subtype to hold its key data.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add a subtype for supporting asymmetric public-key encryption algorithms such
as DSA (FIPS-186) and RSA (PKCS#1 / RFC1337).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Create a key type that can be used to represent an asymmetric key type for use
in appropriate cryptographic operations, such as encryption, decryption,
signature generation and signature verification.
The key type is "asymmetric" and can provide access to a variety of
cryptographic algorithms.
Possibly, this would be better as "public_key" - but that has the disadvantage
that "public key" is an overloaded term.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Eric Biggers