mainline inclusion
from mainline-v6.4-rc6
commit <b72f301c5bdce11ef32a7363bdc05edd4fc3b386>
category: feature
-------------------
Zhaoxin CPUs which use CENTAUR as vendor id, also have NONSTOP TSC
feature. So enable the ACPI driver support for it too.
Signed-off-by: leoliu-oc <leoliu-oc@zhaoxin.com>
mainline inclusion
from mainline-v5.9-rc1
commit <8687bdc04128b2bd16faaae11db10128ad0da7b8>
category: feature
-------------------
Use a normal if statements instead of a two-condition switch-case.
[ bp: Massage commit message. ]
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1599562666-31351-2-git-send-email-TonyWWang-oc@zhaoxin.com
Signed-off-by: leoliu-oc <leoliu-oc@zhaoxin.com>
mainline inclusion
from mainline-v5.5-rc1
commit <283bab9809786cf41798512f5c1e97f4b679ba96>
category: feature
-------------------
Both functions call init_intel_cacheinfo() which computes L2 and L3 cache
sizes from CPUID(4). But then they also call cpu_detect_cache_sizes() a
bit later which computes ->x86_tlbsize and L2 size from CPUID(80000006).
However, the latter call is not needed because
- on these CPUs, CPUID(80000006).EBX for ->x86_tlbsize is reserved
- CPUID(80000006).ECX for the L2 size has the same result as CPUID(4)
Therefore, remove the latter call to simplify the code.
[ bp: Rewrite commit message. ]
Signed-off-by: Tony W Wang-oc <TonyWWang-oc@zhaoxin.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/1579075257-6985-1-git-send-email-TonyWWang-oc@zhaoxin.com
Signed-off-by: leoliu-oc <leoliu-oc@zhaoxin.com>
mainline inclusion
from mainline-v5.5-rc1
commit <7d37953ba81121c8725f99356f7ee9762d4c3ed9>
category: feature
-------------------
Use the recently added IA32_FEAT_CTL MSR initialization sequence to
opportunistically enable VMX support when running on a Zhaoxin CPU.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-8-sean.j.christopherson@intel.com
Signed-off-by: leoliu-oc <leoliu-oc@zhaoxin.com>
mainline inclusion
from mainline-v5.5-rc1
commit <501444905fcb4166589fda99497c273ac5efc65e>
category: feature
-------------------
Use the recently added IA32_FEAT_CTL MSR initialization sequence to
opportunistically enable VMX support when running on a Centaur CPU.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20191221044513.21680-7-sean.j.christopherson@intel.com
Signed-off-by: leoliu-oc <leoliu-oc@zhaoxin.com>
driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I96KNQ
CVE: NA
----------------------------------------------------------------------
We found that the second parameter of function ata_wait_after_reset() is
incorrectly used. We call smp_ata_check_ready_type() to poll the device
type until the 30s timeout, so the correct deadline should be (jiffies +
30000).
Fixes: 3c2673a09c ("scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset")
Signed-off-by: xiabing <xiabing12@h-partners.com>
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Bing Xia <xiabing12@h-partners.com>
Signed-off-by: chenyi <chenyi211@huawei.com>
fix ampere cpu kernel warning:
cpufreg: cpufreg_online: ->get() failed
refer upstream 1eb5dde674 (cpufreq: CPPC: Add support for frequency invariance)
backport this commit's divide-by zero part
Signed-off-by: Huang Cun <cunhuang@tencent.com>
config: set CONFIG_ARM_CMN=m
To support arm-cmn.ko for performance debug
‘for’ loop initial declarations are only allowed in C99 or C11 mode
so set CFLAGS_arm-cmn.o += -std=gnu99
commit 0ba64770a2 upstream.
Initial driver for PMU event counting on the Arm CMN-600 interconnect.
CMN sports an obnoxiously complex distributed PMU system as part of
its debug and trace features, which can do all manner of things like
sampling, cross-triggering and generating CoreSight trace. This driver
covers the PMU functionality, plus the relevant aspects of watchpoints
for simply counting matching flits.
Tested-by: Tsahi Zidenberg <tsahee@amazon.com>
Tested-by: Tuan Phan <tuanphan@os.amperecomputing.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Huang Cun <cunhuang@tencent.com>
add this patch for arm-cmn
commit f82485722e upstream.
Implement the managed variant of krealloc(). This function works with
all memory allocated by devm_kmalloc() (or devres functions using it
implicitly like devm_kmemdup(), devm_kstrdup() etc.).
Managed realloc'ed chunks can be manually released with devm_kfree().
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200824173859.4910-2-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Huang Cun <cunhuang@tencent.com>
add this patch for arm-cmn
commit dc2a633ccb upstream.
We will perform the same size check in devm_krealloc(). Move the relevant
code into a separate helper.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20200629065008.27620-3-brgl@bgdev.pl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Huang Cun <cunhuang@tencent.com>
Describe how to generate and change kernel config.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Reviewed-by: Yongliang Gao <leonylgao@tencent.com>
To fix compile error when building debug kernel:
bnxt/tfc_v3/tfc_tbl_scope.c: In function 'tfc_tbl_scope_mem_alloc':
bnxt/tfc_v3/tfc_tbl_scope.c:1185:1: error: the frame size of 2144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=]
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Reviewed-by: Yongliang Gao <leonylgao@tencent.com>
For details, the version is bnxt_en-1.10.3-230.2.52.0 . Note, bnxt_en
doesn't support RDMA, which needing bnxt_re driver.
Makefile in thirdpaty/bnxt have been modified:
add line 54: BNXT_SRC=$(srctree)/drivers/thirdparty/bnxt
add line 1420: src=$(BNXT_SRC)
Without line 1420, make dist-rpm will compile error as below:
drivers/thirdparty/bnxt/bnxt.c:111:10: fatal error: tfc.h: No such file or directory
#include "tfc.h"
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Reviewed-by: Yongliang Gao <leonylgao@tencent.com>
Getting rid of prefix 'CONFIG_' can solve the issue. In the
previous patch, I missed one place.
Most importantly, I added dependency on CONFIG_PCI_ATS since
This drivers relys on CONFIG_PCI_ATS, so we need to adjust in
Kconfig files.
Fixes: ee280c4189a13 ("sssnic: support this new driver")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Getting rid of prefix 'CONFIG_' can solve the issue.
Fixes: ee280c4189a13 ("sssnic: support this new driver")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
card
When the ast bmc card is detected on ps23xx SoCs, change the card's
vram to uncache mode to avoid unnecessary trouble.
Reviewed-by: Jiakun Shuai<shuaijiakun1288@phytium.com.cn>
Signed-off-by: Xu Yan <xuyan1481@phytium.com.cn>
Signed-off-by: WangHao <wanghao1851@cphytium.com.cn>
When enable efi fb, replace the original efi fb0 when loading the
dc driver.
Reviewed-by: Jiakun Shuai<shuaijiakun1288@phytium.com.cn>
Signed-off-by: Xu Yan <xuyan1481@phytium.com.cn>
Signed-off-by: WangHao <wanghao1851@phytium.com.cn>
bmc card
When the pe2201 bmc card is detected on ps23xx SoCs, map the card's
graphics memory to device attributes to avoid unnecessary trouble.
Reviewed-by: Jiakun Shuai<shuaijiakun1288@phytium.com.cn>
Signed-off-by: Xu Yan <xuyan1481@phytium.com.cn>
Signed-off-by: WangHao <wanghao1851@phytium.com.cn>
hisi_sas debugfs remove should be executed only when debugfs is enabled.
Check whether debugfs is enabled and then remove it only if enabled.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1705904747-62186-4-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: chenyi <chenyi211@huawei.com>
When libata calls ata_link_abort() to abort all ata queued commands, it
calls blk_abort_request() on the SCSI command representing each QC.
This causes scsi_timeout() to be called, which calls scsi_eh_scmd_add() for
each SCSI command.
scsi_eh_scmd_add() sets the SCSI host to state recovery, and then adds the
command to shost->eh_cmd_q.
This will wake up the SCSI EH, and eventually the libata EH strategy
handler will be called, which calls scsi_eh_flush_done_q() to either flush
retry or flush finish each failed command.
The commands that are flush retried by scsi_eh_flush_done_q() are done so
using scsi_queue_insert().
Before commit 8b566edbdb ("scsi: core: Only kick the requeue list if
necessary"), __scsi_queue_insert() called blk_mq_requeue_request() with the
second argument set to true, indicating that it should always kick/run the
requeue list after inserting.
After commit 8b566edbdb ("scsi: core: Only kick the requeue list if
necessary"), __scsi_queue_insert() does not kick/run the requeue list after
inserting, if the current SCSI host state is recovery (which is the case in
the libata example above).
This optimization is probably fine in most cases, as I can only assume that
most often someone will eventually kick/run the queues.
However, that is not the case for scsi_eh_flush_done_q(), where we can see
that the request gets inserted to the requeue list, but the queue is never
started after the request has been inserted, leading to the block layer
waiting for the completion of command that never gets to run.
Since scsi_eh_flush_done_q() is called by SCSI EH context, the SCSI host
state is most likely always in recovery when this function is called.
Thus, let scsi_eh_flush_done_q() explicitly kick the requeue list after
inserting a flush retry command, so that scsi_eh_flush_done_q() keeps the
same behavior as before commit 8b566edbdb ("scsi: core: Only kick the
requeue list if necessary").
Simple reproducer for the libata example above:
$ hdparm -Y /dev/sda
$ echo 1 > /sys/class/scsi_device/0\:0\:0\:0/device/delete
Fixes: 8b566edbdb ("scsi: core: Only kick the requeue list if necessary")
Reported-by: Kevin Locke <kevin@kevinlocke.name>
Closes: https://lore.kernel.org/linux-scsi/ZZw3Th70wUUvCiCY@kevinlocke.name/
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240111120533.3612509-1-cassel@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: chenyi <chenyi211@huawei.com>
In function debugfs_debugfs_snapshot_global_reg_v3_hw() it uses
debugfs_axi_reg.count (which is the number of axi debugfs registers) to
acquire the number of global debugfs registers.
Use debugfs_global_reg.count to acquire the number of global debugfs
registers instead.
Fixes: 623a4b6d5c ("scsi: hisi_sas: Move debugfs code to v3 hw driver")
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1702525516-51258-6-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: chenyi <chenyi211@huawei.com>
For a clear nexus reset operation, the I_T nexus resets are executed
serially for each device. For devices attached through an expander, this
may take 2s per device; so, in total, could take a long time.
Reduce the total time by running the I_T nexus resets in parallel through
async operations.
Link: https://lore.kernel.org/r/1623058179-80434-3-git-send-email-john.garry@huawei.com
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: chenyi <chenyi211@huawei.com>
When taking a network interface down (or removing a SFP module) after
the PHY has encountered an error, phy_stop() complains incorrectly
that it was called from HALTED state.
The reason this is incorrect is that the network driver will have
called phy_start() when the interface was brought up, and the fact
that the PHY has a problem bears no relationship to the administrative
state of the interface. Taking the interface administratively down
(which calls phy_stop()) is always the right thing to do after a
successful phy_start() call, whether or not the PHY has encountered
an error.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Conflicts:
drivers/net/phy/phy.c
include/linux/phy.h
When the PHY library calls phy_error() something bad has happened, and
we halt the PHY state machine. Calling phy_error() from the main state
machine however is not precise enough to know whether the issue is
reading the link status or starting auto-negotiation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Conflicts:
drivers/net/phy/phy.c
Currently, ethtool does not expose how many lanes are used when the
link is up.
After adding a possibility to advertise or force a specific number of
lanes, the lanes in use value can be either the maximum width of the port
or below.
Extend ethtool to expose the number of lanes currently in use for
drivers that support it.
For example:
$ ethtool -s swp1 speed 100000 lanes 4
$ ethtool -s swp2 speed 100000 lanes 4
$ ip link set swp1 up
$ ip link set swp2 up
$ ethtool swp1
Settings for swp1:
Supported ports: [ FIBRE Backplane ]
Supported link modes: 1000baseT/Full
10000baseT/Full
1000baseKX/Full
10000baseKR/Full
10000baseR_FEC
40000baseKR4/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
50000baseCR2/Full
50000baseKR2/Full
100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
50000baseSR2/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
10000baseER/Full
50000baseKR/Full
50000baseSR/Full
50000baseCR/Full
50000baseLR_ER_FR/Full
50000baseDR/Full
100000baseKR2/Full
100000baseSR2/Full
100000baseCR2/Full
100000baseLR2_ER2_FR2/Full
100000baseDR2/Full
200000baseKR4/Full
200000baseSR4/Full
200000baseLR4_ER4_FR4/Full
200000baseDR4/Full
200000baseCR4/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 1000baseT/Full
10000baseT/Full
1000baseKX/Full
1000baseKX/Full
10000baseKR/Full
10000baseR_FEC
40000baseKR4/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseKR/Full
25000baseSR/Full
50000baseCR2/Full
50000baseKR2/Full
100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
50000baseSR2/Full
10000baseCR/Full
10000baseSR/Full
10000baseLR/Full
10000baseER/Full
200000baseKR4/Full
200000baseSR4/Full
200000baseLR4_ER4_FR4/Full
200000baseDR4/Full
200000baseCR4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Advertised link modes: 100000baseKR4/Full
100000baseSR4/Full
100000baseCR4/Full
100000baseLR4_ER4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: 100000Mb/s
Lanes: 4
Duplex: Full
Auto-negotiation: on
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Currently, when user space queries the link's parameters, as speed and
duplex, each parameter is passed from the driver to ethtool.
Instead, get the link mode bit in use, and derive each of the parameters
from it in ethtool.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Conflicts:
net/ethtool/linkmodes.c
Currently, when auto negotiation is on, the user can advertise all the
linkmodes which correspond to a specific speed, but does not have a
similar selector for the number of lanes. This is significant when a
specific speed can be achieved using different number of lanes. For
example, 2x50 or 4x25.
Add 'ETHTOOL_A_LINKMODES_LANES' attribute and expand 'struct
ethtool_link_settings' with lanes field in order to implement a new
lanes-selector that will enable the user to advertise a specific number
of lanes as well.
When auto negotiation is off, lanes parameter can be forced only if the
driver supports it. Add a capability bit in 'struct ethtool_ops' that
allows ethtool know if the driver can handle the lanes parameter when
auto negotiation is off, so if it does not, an error message will be
returned when trying to set lanes.
Example:
$ ethtool -s swp1 lanes 4
$ ethtool swp1
Settings for swp1:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKR/Full
40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
25000baseCR/Full
25000baseSR/Full
50000baseCR2/Full
100000baseSR4/Full
100000baseCR4/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 40000baseCR4/Full
40000baseSR4/Full
40000baseLR4/Full
100000baseSR4/Full
100000baseCR4/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: on
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Link detected: no
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Conflicts:
net/ethtool/linkmodes.c
net/ethtool/netlink.h
Create a new function for input validations to be called before
rtnl_lock() and move the master slave validation to that function.
This would be a cleanup for next patch that would add another validation
to the new function.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Conflicts:
net/ethtool/linkmodes.c
Currently NIC packet receiving performance based on page pool deteriorates
occasionally. To analysis the causes of this problem page allocation stats
are collected. Here are the stats when NIC rx performance deteriorates:
bandwidth(Gbits/s) 16.8 6.91
rx_pp_alloc_fast 13794308 21141869
rx_pp_alloc_slow 108625 166481
rx_pp_alloc_slow_h 0 0
rx_pp_alloc_empty 8192 8192
rx_pp_alloc_refill 0 0
rx_pp_alloc_waive 100433 158289
rx_pp_recycle_cached 0 0
rx_pp_recycle_cache_full 0 0
rx_pp_recycle_ring 362400 420281
rx_pp_recycle_ring_full 6064893 9709724
rx_pp_recycle_released_ref 0 0
The rx_pp_alloc_waive count indicates that a large number of pages' numa
node are inconsistent with the NIC device numa node. Therefore these pages
can't be reused by the page pool. As a result, many new pages would be
allocated by __page_pool_alloc_pages_slow which is time consuming. This
causes the NIC rx performance fluctuations.
The main reason of huge numa mismatch pages in page pool is that page pool
uses alloc_pages_bulk_array to allocate original pages. This function is
not suitable for page allocation in NUMA scenario. So this patch uses
alloc_pages_bulk_array_node which has a NUMA id input parameter to ensure
the NUMA consistent between NIC device and allocated pages.
Repeated NIC rx performance tests are performed 40 times. NIC rx bandwidth
is higher and more stable compared to the datas above. Here are three test
stats, the rx_pp_alloc_waive count is zero and rx_pp_alloc_slow which
indicates pages allocated from slow patch is relatively low.
bandwidth(Gbits/s) 93 93.9 93.8
rx_pp_alloc_fast 60066264 61266386 60938254
rx_pp_alloc_slow 16512 16517 16539
rx_pp_alloc_slow_ho 0 0 0
rx_pp_alloc_empty 16512 16517 16539
rx_pp_alloc_refill 473841 481910 481585
rx_pp_alloc_waive 0 0 0
rx_pp_recycle_cached 0 0 0
rx_pp_recycle_cache_full 0 0 0
rx_pp_recycle_ring 29754145 30358243 30194023
rx_pp_recycle_ring_full 0 0 0
rx_pp_recycle_released_ref 0 0 0
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20220705113515.54342-1-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Patch series "vmalloc() vs bulk allocator", v2.
This patch (of 3):
Add a "node" variant of the alloc_pages_bulk_array() function. The helper
guarantees that a __alloc_pages_bulk() is invoked with a valid NUMA node
ID.
Link: https://lkml.kernel.org/r/20210516202056.2120-1-urezki@gmail.com
Link: https://lkml.kernel.org/r/20210516202056.2120-2-urezki@gmail.com
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Currently If use page pool allocation stats to analysis a RX performance
degradation problem. These stats only count for pages allocate from
page_pool_alloc_pages. But nic drivers such as hns3 use
page_pool_dev_alloc_frag to allocate pages, so page stats in this API
should also be counted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Introduce page_pool APIs to report stats through ethtool and reduce
duplicated code in each driver.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Add the new stats API, kernel config parameter, and stats structure
information to the page_pool documentation.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Add documentation explaining the basic functionality and design
principles of the API
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Adds a function page_pool_get_stats which can be used by drivers to obtain
stats for a specified page_pool.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Add per-cpu stats tracking page pool recycling events:
- cached: recycling placed page in the page pool cache
- cache_full: page pool cache was full
- ring: page placed into the ptr ring
- ring_full: page released from page pool because the ptr ring was full
- released_refcnt: page released (and not recycled) because refcnt > 1
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
Add per-pool statistics counters for the allocation path of a page pool.
These stats are incremented in softirq context, so no locking or per-cpu
variables are needed.
This code is disabled by default and a kernel config option is provided for
users who wish to enable them.
The statistics added are:
- fast: successful fast path allocations
- slow: slow path order-0 allocations
- slow_high_order: slow path high order allocations
- empty: ptr ring is empty, so a slow path allocation was forced.
- refill: an allocation which triggered a refill of the cache
- waive: pages obtained from the ptr ring that cannot be added to
the cache due to a NUMA mismatch.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: hongrongxuan <hongrongxuan@huawei.com>
leoliu-oc