Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
While the suspend function is already marked __maybe_unused,
the resume function is not, which leads to a warning when
CONFIG_PM is disabled:
sound/soc/codecs/cx2072x.c:1625:12: error: unused function 'cx2072x_runtime_resume' [-Werror,-Wunused-function]
Mark this one like the other one.
Fixes: a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixes gcc '-Wunused-but-set-variable' warning:
sound/soc/codecs/cx2072x.c: In function cx2072x_config_i2spcm:
sound/soc/codecs/cx2072x.c:679:6: warning: variable is_right_j set but not used [-Wunused-but-set-variable]
It's never used and can be removed.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a spelling mistake in a dev_err error message. Fit it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case where frac_div larger than 96 the result of an unsigned
multiplication overflows an unsigned int. For example, this can
happen when the sample_rate is 192000 and pll_input is 122. Fix
this by casing the first term of the mutiply to a u64. Also remove
the extraneous parentheses around the expression.
Addresses-Coverity: ("Unintentional integer overflow")
Fixes: a497a43637 ("ASoC: Add support for Conexant CX2072X CODEC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable pulse_len is being initialized to 1 however this value is
never read and pulse_len is being re-assigned later in a switch
statement. Clean up the code by removing the redundant initialization.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Initial commit of the Conexant CX2072X CODEC driver. Some features are
not present.
The CX2072X is a ultra low power stereo audio codec supports I2S/TDM
host interface with EQ, DRC features in playback mode.
Featues of CX2072X codec:
* Two 24 bits DACs and DACs.
* Stereo Headphone AMP.
* 2.8W per channel class-D output.
* Integrated seven bands per channel EQ and DRC.
* Fully integrated headset support with detect/switch.
* Stereo digital microphone for array applications.
* S/PDIF output.
* Bi-directional GPIOs.
* Support analog and digital PC Beeep.
* One headset button support.
* Supports a wide variety of host interfaces.
-wide variety of I2S and similar bit-stream formats
with word lengths of up to 24 bits.
-TDM stream supports up to 4 channels.
* AEC loopback support.
Further fixes by tiwai:
* Rebase to 5.2+
* Missing DAPM entry definitions
* Missing power hooks
* Fix uninitialized variable warning
* Rewrite jack detection stuff to use set_jack callback
* Plumbing jack detection code for Intel ASoC
* Move clk management into runtime PM
* Drop incorrect regcache usages
* Drop untested stuff: OF table, EQ/DRC handling
* Lots of code cleanups and minor refactoring
The OF code was dropped due to the lack of testability.
It should be easy to re-add once if someone can test it.
v1->v2: No change
v2->v3: Move register tables to appropriate place
Remove some confusing codes
Set snd_ctl_boolean_* helpers directly
Fix EQ put callback
Rename to "DAC1 Switch" from "DAC1 Mute Switch"
Drop superfluous regmap calls at shutdown
Avoid regmap_register_patch()
Add missing register definitions
Fix register access on big-endian machine
Remove regcache messes
v3->v4: Fix the wrong endianess conversion in reg write
Minor code cleanups
v4->v5: Move clk management to runtime PM
Sparse warning fixes
Some more code simplification
Drop tricky regcache fiddling
Apply mutex locks around possible racy sequences
Move exported jack detection stuff into set_jack callback
v5->v6: Drop buggy&untested EQ and DRC codes
Lots of code reduction/cleanup
Add more comments about platform-specific stuff
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=115531
Signed-off-by: Simon Ho <simon.ho@conexant.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Jianping Liu