We need to put the policies when re-using the pcpu xdst entry, else
this leaks the reference.
Fixes: ec30d78c14 ("xfrm: add xdst pcpu cache")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
On policies with a transport mode template, we pass the addresses
from the flowi to xfrm_state_find(), assuming that the IP addresses
(and address family) don't change during transformation.
Unfortunately our policy template validation is not strict enough.
It is possible to configure policies with transport mode template
where the address family of the template does not match the selectors
address family. This lead to stack-out-of-bound reads because
we compare arddesses of the wrong family. Fix this by refusing
such a configuration, address family can not change on transport
mode.
We use the assumption that, on transport mode, the first templates
address family must match the address family of the policy selector.
Subsequent transport mode templates must mach the address family of
the previous template.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
copy geniv when cloning the xfrm state.
x->geniv was not copied to the new state and migration would fail.
xfrm_do_migrate
..
xfrm_state_clone()
..
..
esp_init_aead()
crypto_alloc_aead()
crypto_alloc_tfm()
crypto_find_alg() return EAGAIN and failed
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we do tunnel or beet mode, we pass saddr and daddr from the
template to xfrm_state_find(), this is ok. On transport mode,
we pass the addresses from the flowi, assuming that the IP
addresses (and address family) don't change during transformation.
This assumption is wrong in the IPv4 mapped IPv6 case, packet
is IPv4 and template is IPv6.
Fix this by catching address family missmatches of the policy
and the flow already before we do the lookup.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Code path when (encap_type < 0) does not verify the state is valid
before progressing.
This will result in a crash if, for instance, x->km.state ==
XFRM_STATE_ACQ.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
x is already initialized to the same value, above.
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_dev_state_add function returns success for unsupported HW SA options.
Resulting the calling function to create SW SA without corrlating HW SA.
Desipte IPSec device offloading option was chosen.
These not supported HW SA options are hard coded within xfrm_dev_state_add
function.
SW backward compatibility will break if we add any of these option as old
HW will fail with new SW.
This patch changes the behaviour to return -EINVAL in case unsupported
option is chosen.
Notifying user application regarding failure and not breaking backward
compatibility for newly added HW SA options.
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In case of wrap around, replay_esn->oseq_hi is not updated
before it is tested for it's actual value, leading function
to fail with overflow indication and packets being dropped.
This patch updates replay_esn->oseq_hi in the right place.
Fixes: d7dbefc45c ("xfrm: Add xfrm_replay_overflow functions for offloading")
Signed-off-by: Yossef Efraim <yossefe@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This seems to be an obvious typo, NLA_U32 is type of the attribute, not its
(minimal) length.
Fixes: 077fbac405 ("net: xfrm: support setting an output mark.")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
While building ipsec bundles, blocks of xfrm dsts are linked together
using dst->next from bottom to the top.
The only thing this is used for is initializing the pmtu values of the
xfrm stack, and for updating the mtu values at xfrm_bundle_ok() time.
The bundle pmtu entries must be processed in this order so that pmtu
values lower in the stack of routes can propagate up to the higher
ones.
Avoid using dst->next by simply maintaining an array of dst pointers
as we already do for the xfrm_state objects when building the bundle.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
The first member of an IPSEC route bundle chain sets it's dst->path to
the underlying ipv4/ipv6 route that carries the bundle.
Stated another way, if one were to follow the xfrm_dst->child chain of
the bundle, the final non-NULL pointer would be the path and point to
either an ipv4 or an ipv6 route.
This is largely used to make sure that PMTU events propagate down to
the correct ipv4 or ipv6 route.
When we don't have the top of an IPSEC bundle 'dst->path == dst'.
Move it down into xfrm_dst and key off of dst->xfrm.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
XFRM bundle child chains look like this:
xdst1 --> xdst2 --> xdst3 --> path_dst
All of xdstN are xfrm_dst objects and xdst->u.dst.xfrm is non-NULL.
The final child pointer in the chain, here called 'path_dst', is some
other kind of route such as an ipv4 or ipv6 one.
The xfrm output path pops routes, one at a time, via the child
pointer, until we hit one which has a dst->xfrm pointer which
is NULL.
We can easily preserve the above mechanisms with child sitting
only in the xfrm_dst structure. All children in the chain
before we break out of the xfrm_output() loop have dst->xfrm
non-NULL and are therefore xfrm_dst objects.
Since we break out of the loop when we find dst->xfrm NULL, we
will not try to dereference 'dst' as if it were an xfrm_dst.
Signed-off-by: David S. Miller <davem@davemloft.net>
This will make a future change moving the dst->child pointer less
invasive.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Only IPSEC routes have a non-NULL dst->child pointer. And IPSEC
routes are identified by a non-NULL dst->xfrm pointer.
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently it is possible to add or update socket policies, but
not clear them. Therefore, once a socket policy has been applied,
the socket cannot be used for unencrypted traffic.
This patch allows (privileged) users to clear socket policies by
passing in a NULL pointer and zero length argument to the
{IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both
the incoming and outgoing policies being cleared.
The simple approach taken in this patch cannot clear socket
policies in only one direction. If desired this could be added
in the future, for example by continuing to pass in a length of
zero (which currently is guaranteed to return EMSGSIZE) and
making the policy be a pointer to an integer that contains one
of the XFRM_POLICY_{IN,OUT} enum values.
An alternative would have been to interpret the length as a
signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the
input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output
policy.
Tested: https://android-review.googlesource.com/539816
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
syzbot reported a kernel warning in xfrm_state_fini(), which
indicates that we have entries left in the list
net->xfrm.state_all whose proto is zero. And
xfrm_id_proto_match() doesn't consider them as a match with
IPSEC_PROTO_ANY in this case.
Proto with value 0 is probably not a valid value, at least
verify_newsa_info() doesn't consider it valid either.
This patch fixes it by checking the proto value in
validate_tmpl() and rejecting invalid ones, like what iproute2
does in xfrm_xfrmproto_getbyname().
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
1) Copy policy family in clone_policy, otherwise this can
trigger a BUG_ON in af_key. From Herbert Xu.
2) Revert "xfrm: Fix stack-out-of-bounds read in xfrm_state_find."
This added a regression with transport mode when no addresses
are configured on the policy template.
Both patches are stable candidates.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit c9f3f813d4.
This commit breaks transport mode when the policy template
has widlcard addresses configured, so revert it.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The syzbot found an ancient bug in the IPsec code. When we cloned
a socket policy (for example, for a child TCP socket derived from a
listening socket), we did not copy the family field. This results
in a live policy with a zero family field. This triggers a BUG_ON
check in the af_key code when the cloned policy is retrieved.
This patch fixes it by copying the family field over.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Simple cases of overlapping changes in the packet scheduler.
Must easier to resolve this time.
Which probably means that I screwed it up somehow.
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2017-11-09
1) Fix a use after free due to a reallocated skb head.
From Florian Westphal.
2) Fix sporadic lookup failures on labeled IPSEC.
From Florian Westphal.
3) Fix a stack out of bounds when a socket policy is applied
to an IPv6 socket that sends IPv4 packets.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Files removed in 'net-next' had their license header updated
in 'net'. We take the remove from 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
When we do tunnel or beet mode, we pass saddr and daddr from the
template to xfrm_state_find(), this is ok. On transport mode,
we pass the addresses from the flowi, assuming that the IP
addresses (and address family) don't change during transformation.
This assumption is wrong in the IPv4 mapped IPv6 case, packet
is IPv4 and template is IPv6. Fix this by using the addresses
from the template unconditionally.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Stephen Smalley says:
Since 4.14-rc1, the selinux-testsuite has been encountering sporadic
failures during testing of labeled IPSEC. git bisect pointed to
commit ec30d ("xfrm: add xdst pcpu cache").
The xdst pcpu cache is only checking that the policies are the same,
but does not validate that the policy, state, and flow match with respect
to security context labeling.
As a result, the wrong SA could be used and the receiver could end up
performing permission checking and providing SO_PEERSEC or SCM_SECURITY
values for the wrong security context.
This fix makes it so that we always do the template resolution, and
then checks that the found states match those in the pcpu bundle.
This has the disadvantage of doing a bit more work (lookup in state hash
table) if we can reuse the xdst entry (we only avoid xdst alloc/free)
but we don't add a lot of extra work in case we can't reuse.
xfrm_pol_dead() check is removed, reasoning is that
xfrm_tmpl_resolve does all needed checks.
Cc: Paul Moore <paul@paul-moore.com>
Fixes: ec30d78c14 ("xfrm: add xdst pcpu cache")
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWfswbQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykvEwCfXU1MuYFQGgMdDmAZXEc+xFXZvqgAoKEcHDNA
6dVh26uchcEQLN/XqUDt
=x306
-----END PGP SIGNATURE-----
Merge tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull initial SPDX identifiers from Greg KH:
"License cleanup: add SPDX license identifiers to some files
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the
'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally
binding shorthand, which can be used instead of the full boiler plate
text.
This patch is based on work done by Thomas Gleixner and Kate Stewart
and Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset
of the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to
license had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied
to a file was done in a spreadsheet of side by side results from of
the output of two independent scanners (ScanCode & Windriver)
producing SPDX tag:value files created by Philippe Ombredanne.
Philippe prepared the base worksheet, and did an initial spot review
of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537
files assessed. Kate Stewart did a file by file comparison of the
scanner results in the spreadsheet to determine which SPDX license
identifier(s) to be applied to the file. She confirmed any
determination that was not immediately clear with lawyers working with
the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained
>5 lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that
was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that
became the concluded license(s).
- when there was disagreement between the two scanners (one detected
a license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply
(and which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases,
confirmation by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.
The Windriver scanner is based on an older version of FOSSology in
part, so they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot
checks in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect
the correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial
patch version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch
license was not GPL-2.0 WITH Linux-syscall-note to ensure that the
applied SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'spdx_identifiers-4.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
License cleanup: add SPDX license identifier to uapi header files with a license
License cleanup: add SPDX license identifier to uapi header files with no license
License cleanup: add SPDX GPL-2.0 license identifier to files with no license
syzbot reports:
BUG: KASAN: use-after-free in __xfrm_state_lookup+0x695/0x6b0
Read of size 4 at addr ffff8801d434e538 by task syzkaller647520/2991
[..]
__xfrm_state_lookup+0x695/0x6b0 net/xfrm/xfrm_state.c:833
xfrm_state_lookup+0x8a/0x160 net/xfrm/xfrm_state.c:1592
xfrm_input+0x8e5/0x22f0 net/xfrm/xfrm_input.c:302
The use-after-free is the ipv4 destination address, which points
to an skb head area that has been reallocated:
pskb_expand_head+0x36b/0x1210 net/core/skbuff.c:1494
__pskb_pull_tail+0x14a/0x17c0 net/core/skbuff.c:1877
pskb_may_pull include/linux/skbuff.h:2102 [inline]
xfrm_parse_spi+0x3d3/0x4d0 net/xfrm/xfrm_input.c:170
xfrm_input+0xce2/0x22f0 net/xfrm/xfrm_input.c:291
so the real bug is that xfrm_parse_spi() uses pskb_may_pull, but
for now do smaller workaround that makes xfrm_input fetch daddr
after spi parsing.
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Smooth Cong Wang's bug fix into 'net-next'. Basically put
the bulk of the tcf_block_put() logic from 'net' into
tcf_block_put_ext(), but after the offload unbind.
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-10-30
1) Change some variables that can't be negative
from int to unsigned int. From Alexey Dobriyan.
2) Remove a redundant header initialization in esp6.
From Colin Ian King.
3) Some BUG to BUG_ON conversions.
From Gustavo A. R. Silva.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We reset the encapsulation field of the skb too early
in xfrm_output. As a result, the GRE GSO handler does
not segment the packets. This leads to a performance
drop down. We fix this by resetting the encapsulation
field right before we do the transformation, when
the inner headers become invalid.
Fixes: f1bd7d659e ("xfrm: Add encapsulation header offsets while SKB is not encrypted")
Reported-by: Vicente De Luca <vdeluca@zendesk.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Several conflicts here.
NFP driver bug fix adding nfp_netdev_is_nfp_repr() check to
nfp_fl_output() needed some adjustments because the code block is in
an else block now.
Parallel additions to net/pkt_cls.h and net/sch_generic.h
A bug fix in __tcp_retransmit_skb() conflicted with some of
the rbtree changes in net-next.
The tc action RCU callback fixes in 'net' had some overlap with some
of the recent tcf_block reworking.
Signed-off-by: David S. Miller <davem@davemloft.net>
Use BUG_ON instead of if condition followed by BUG.
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
If a socket has a valid dst cache, then xfrm_lookup_route will get
skipped. However, the cache is not invalidated when applying policy to a
socket (i.e. IPV6_XFRM_POLICY). The result is that new policies are
sometimes ignored on those sockets. (Note: This was broken for IPv4 and
IPv6 at different times.)
This can be demonstrated like so,
1. Create UDP socket.
2. connect() the socket.
3. Apply an outbound XFRM policy to the socket. (setsockopt)
4. send() data on the socket.
Packets will continue to be sent in the clear instead of matching an
xfrm or returning a no-match error (EAGAIN). This affects calls to
send() and not sendto().
Invalidating the sk_dst_cache is necessary to correctly apply xfrm
policies. Since we do this in xfrm_user_policy(), the sk_lock was
already acquired in either do_ip_setsockopt() or do_ipv6_setsockopt(),
and we may call __sk_dst_reset().
Performance impact should be negligible, since this code is only called
when changing xfrm policy, and only affects the socket in question.
Fixes: 00bc0ef588 ("ipv6: Skip XFRM lookup if dst_entry in socket cache is valid")
Tested: https://android-review.googlesource.com/517555
Tested: https://android-review.googlesource.com/418659
Signed-off-by: Jonathan Basseri <misterikkit@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We have a memleak whenever a flow matches a policy without
a matching SA. In this case we generate a dummy bundle and
take an additional refcount on the dst_entry. This was needed
as long as we had the flowcache. The flowcache removal patches
deleted all related refcounts but forgot the one for the
dummy bundle case. Fix the memleak by removing this refcount.
Fixes: 3ca28286ea ("xfrm_policy: bypass flow_cache_lookup")
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
An independent security researcher, Mohamed Ghannam, has reported
this vulnerability to Beyond Security's SecuriTeam Secure Disclosure
program.
The xfrm_dump_policy_done function expects xfrm_dump_policy to
have been called at least once or it will crash. This can be
triggered if a dump fails because the target socket's receive
buffer is full.
This patch fixes it by using the cb->start mechanism to ensure that
the initialisation is always done regardless of the buffer situation.
Fixes: 12a169e7d8 ("ipsec: Put dumpers on the dump list")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
helper to pass the timer pointer explicitly.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we cannot find a suitable inner_mode value, we will leak
the currently allocated 'xdst'.
The fix is to make sure it is linked into the chain before
erroring out.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
I might be wrong but it doesn't look like xfrm_state_lock is required
for xfrm_policy_cache_flush and calling it under this lock triggers both
"sleeping function called from invalid context" and "possible circular
locking dependency detected" warnings on flush.
Fixes: ec30d78c14 xfrm: add xdst pcpu cache
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
All netlink message sizes are a) unsigned, b) can't be >= 4GB in size
because netlink doesn't support >= 64KB messages in the first place.
All those size_t across the code are a scam especially across networking
which likes to work with small numbers like 1500 or 65536.
Propagate unsignedness and flip some "int" to "unsigned int" as well.
This is preparation to switching nlmsg_new() to "unsigned int".
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Replay detection bitmaps can't have negative length.
Comparisons with nla_len() are left signed just in case negative value
can sneak in there.
Propagate unsignedness for code size savings:
add/remove: 0/0 grow/shrink: 0/5 up/down: 0/-38 (-38)
function old new delta
xfrm_state_construct 1802 1800 -2
xfrm_update_ae_params 295 289 -6
xfrm_state_migrate 1345 1339 -6
xfrm_replay_notify_esn 349 337 -12
xfrm_replay_notify_bmp 345 333 -12
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Key lengths can't be negative.
Comparison with nla_len() is left signed just in case negative value
can sneak in there.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Key lengths can't be negative.
Comparison with nla_len() is left signed just in case negative value
can sneak in there.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Key lengths can't be negative.
Comparison with nla_len() is left signed just in case negative value
can sneak in there.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Reset the offload device at the xfrm_state if the device was
not able to offload the state. Otherwise we drop the device
refcount twice.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Reported-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we off load a SA, it gets pushed to the NIC before we can
add it. In case of a failure, we don't delete this SA from the
NIC. Fix this by calling xfrm_dev_state_delete on failure.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Reported-by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
A recent commit added an output_mark. When copying
this output_mark, the return value of copy_sec_ctx
is overwitten without a check. Fix this by copying
the output_mark before the security context.
Fixes: 077fbac405 ("net: xfrm: support setting an output mark.")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In conjunction with crypto offload [1], removing the ESP trailer by
hardware can potentially improve the performance by avoiding (1) a
cache miss incurred by reading the nexthdr field and (2) the necessity
to calculate the csum value of the trailer in order to keep skb->csum
valid.
This patch introduces the changes to the xfrm stack and merely serves
as an infrastructure. Subsequent patch to mlx5 driver will put this to
a good use.
[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg175733.html
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The memory reserved to dump the ID of the xfrm state includes a padding
byte in struct xfrm_usersa_id added by the compiler for alignment. To
prevent the heap info leak, memset(0) the sa_id before filling it.
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Fixes: d51d081d65 ("[IPSEC]: Sync series - user")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The memory reserved to dump the expired xfrm state includes padding
bytes in struct xfrm_user_expire added by the compiler for alignment. To
prevent the heap info leak, memset(0) the remainder of the struct.
Initializing the whole structure isn't needed as copy_to_user_state()
already takes care of clearing the padding bytes within the 'state'
member.
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The memory reserved to dump the ID of the xfrm state includes a padding
byte in struct xfrm_usersa_id added by the compiler for alignment. To
prevent the heap info leak, memset(0) the whole struct before filling
it.
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Fixes: 0603eac0d6 ("[IPSEC]: Add XFRMA_SA/XFRMA_POLICY for delete notification")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The memory reserved to dump the xfrm offload state includes padding
bytes of struct xfrm_user_offload added by the compiler for alignment.
Add an explicit memset(0) before filling the buffer to avoid the heap
info leak.
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
While removing dst_entry garbage collection, commit 52df157f17
("xfrm: take refcnt of dst when creating struct xfrm_dst bundle")
changed xfrm_resolve_and_create_bundle so it returns an xdst with
a refcount of 1 instead of 0.
However, it did not delete the dst_hold performed by xfrm_lookup
when a per-socket policy is in use. This means that when a
socket policy is in use, dst entries returned by xfrm_lookup have
a refcount of 2, and are not freed when no longer in use.
Cc: Wei Wang <weiwan@google.com>
Fixes: 52df157f17 ("xfrm: take refcnt of dst when creating struct xfrm_dst bundle")
Tested: https://android-review.googlesource.com/417481
Tested: https://android-review.googlesource.com/418659
Tested: https://android-review.googlesource.com/424463
Tested: https://android-review.googlesource.com/452776 passes on net-next
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-08-21
1) Support RX checksum with IPsec crypto offload for esp4/esp6.
From Ilan Tayari.
2) Fixup IPv6 checksums when doing IPsec crypto offload.
From Yossi Kuperman.
3) Auto load the xfrom offload modules if a user installs
a SA that requests IPsec offload. From Ilan Tayari.
4) Clear RX offload informations in xfrm_input to not
confuse the TX path with stale offload informations.
From Ilan Tayari.
5) Allow IPsec GSO for local sockets if the crypto operation
will be offloaded.
6) Support setting of an output mark to the xfrm_state.
This mark can be used to to do the tunnel route lookup.
From Lorenzo Colitti.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On systems that use mark-based routing it may be necessary for
routing lookups to use marks in order for packets to be routed
correctly. An example of such a system is Android, which uses
socket marks to route packets via different networks.
Currently, routing lookups in tunnel mode always use a mark of
zero, making routing incorrect on such systems.
This patch adds a new output_mark element to the xfrm state and
a corresponding XFRMA_OUTPUT_MARK netlink attribute. The output
mark differs from the existing xfrm mark in two ways:
1. The xfrm mark is used to match xfrm policies and states, while
the xfrm output mark is used to set the mark (and influence
the routing) of the packets emitted by those states.
2. The existing mark is constrained to be a subset of the bits of
the originating socket or transformed packet, but the output
mark is arbitrary and depends only on the state.
The use of a separate mark provides additional flexibility. For
example:
- A packet subject to two transforms (e.g., transport mode inside
tunnel mode) can have two different output marks applied to it,
one for the transport mode SA and one for the tunnel mode SA.
- On a system where socket marks determine routing, the packets
emitted by an IPsec tunnel can be routed based on a mark that
is determined by the tunnel, not by the marks of the
unencrypted packets.
- Support for setting the output marks can be introduced without
breaking any existing setups that employ both mark-based
routing and xfrm tunnel mode. Simply changing the code to use
the xfrm mark for routing output packets could xfrm mark could
change behaviour in a way that breaks these setups.
If the output mark is unspecified or set to zero, the mark is not
set or changed.
Tested: make allyesconfig; make -j64
Tested: https://android-review.googlesource.com/452776
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Quoting Ilan Tayari:
1. Set up a host-to-host IPSec tunnel (or transport, doesn't matter)
2. Ping over IPSec, or do something to populate the pcpu cache
3. Join a MC group, then leave MC group
4. Try to ping again using same CPU as before -> traffic
doesn't egress the machine at all
Ilan debugged the problem down to the fact that one of the path dsts
devices point to lo due to earlier dst_dev_put().
In this case, dst is marked as DEAD and we cannot reuse the bundle.
The cache only asserted that the requested policy and that of the cached
bundle match, but its not enough - also verify the path is still valid.
Fixes: ec30d78c14 ("xfrm: add xdst pcpu cache")
Reported-by: Ayham Masood <ayhamm@mellanox.com>
Tested-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'dir' parameter in xfrm_migrate() is a user-controlled byte which is used
as an array index. This can lead to an out-of-bound access, kernel lockup and
DoS. Add a check for the 'dir' value.
This fixes CVE-2017-11600.
References: https://bugzilla.redhat.com/show_bug.cgi?id=1474928
Fixes: 80c9abaabf ("[XFRM]: Extension for dynamic update of endpoint address(es)")
Cc: <stable@vger.kernel.org> # v2.6.21-rc1
Reported-by: "bo Zhang" <zhangbo5891001@gmail.com>
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Creating sub policy that matches the same outer flow as main policy does
leads to a null pointer dereference if the outer mode's family is ipv4.
For userspace compatibility, this patch just eliminates the crash i.e.,
does not introduce any new sorting rule, which would fruitlessly affect
all but the aforementioned case.
Signed-off-by: Koichiro Den <den@klaipeden.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
If an incoming packet undergoes XFRM crypto-offload, its secpath is
filled with xfrm_offload struct denoting offload information.
If the SKB is then forwarded to a device which supports crypto-
offload, the stack wrongfully attempts to offload it (even though
the output SA may not exist on the device) due to the leftover
secpath xo.
Clear the ingress xo by zeroizing secpath->olen just before
delivering the decapsulated packet to the network stack.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
IPSec crypto offload depends on the protocol-specific
offload module (such as esp_offload.ko).
When the user installs an SA with crypto-offload, load
the offload module automatically, in the same way
that the protocol module is loaded (such as esp.ko)
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
retain last used xfrm_dst in a pcpu cache.
On next request, reuse this dst if the policies are the same.
The cache will not help with strict RR workloads as there is no hit.
The cache packet-path part is reasonably small, the notifier part is
needed so we do not add long hangs when a device is dismantled but some
pcpu xdst still holds a reference, there are also calls to the flush
operation when userspace deletes SAs so modules can be removed
(there is no hit.
We need to run the dst_release on the correct cpu to avoid races with
packet path. This is done by adding a work_struct for each cpu and then
doing the actual test/release on each affected cpu via schedule_work_on().
Test results using 4 network namespaces and null encryption:
ns1 ns2 -> ns3 -> ns4
netperf -> xfrm/null enc -> xfrm/null dec -> netserver
what TCP_STREAM UDP_STREAM UDP_RR
Flow cache: 14644.61 294.35 327231.64
No flow cache: 14349.81 242.64 202301.72
Pcpu cache: 14629.70 292.21 205595.22
UDP tests used 64byte packets, tests ran for one minute each,
value is average over ten iterations.
'Flow cache' is 'net-next', 'No flow cache' is net-next plus this
series but without this patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
After rcu conversions performance degradation in forward tests isn't that
noticeable anymore.
See next patch for some numbers.
A followup patcg could then also remove genid from the policies
as we do not cache bundles anymore.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This allows to remove flow cache object embedded in struct xfrm_dst.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes the wrapper and renames the __xfrm_policy_lookup variant
to get rid of another place that used flow cache objects.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
XFRM_POLICY_IN/OUT/FWD are identical to FLOW_DIR_*, so gcc already
removed this function as its just returns the argument. Again, no
code change.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
after previous change oldflo and xdst are always NULL.
These branches were already removed by gcc, this doesn't change code.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of consulting flow cache, call the xfrm bundle/policy lookup
functions directly. This pretends the flow cache had no entry.
This helps to gradually remove flow cache integration,
followup commit will remove the dead code that this change adds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-06-23
1) Use memdup_user to spmlify xfrm_user_policy.
From Geliang Tang.
2) Make xfrm_dev_register static to silence a sparse warning.
From Wei Yongjun.
3) Use crypto_memneq to check the ICV in the AH protocol.
From Sabrina Dubroca.
4) Remove some unused variables in esp6.
From Stephen Hemminger.
5) Extend XFRM MIGRATE to allow to change the UDP encapsulation port.
From Antony Antony.
6) Include the UDP encapsulation port to km_migrate announcements.
From Antony Antony.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
DST_NOCACHE flag check has been removed from dst_release() and
dst_hold_safe() in a previous patch because all the dst are now ref
counted properly and can be released based on refcnt only.
Looking at the rest of the DST_NOCACHE use, all of them can now be
removed or replaced with other checks.
So this patch gets rid of all the DST_NOCACHE usage and remove this flag
completely.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that all the components have been changed to release dst based on
refcnt only and not depend on dst gc anymore, we can remove the
temporary flag DST_NOGC.
Note that we also need to remove the DST_NOCACHE check in dst_release()
and dst_hold_safe() because now all the dst are released based on refcnt
and behaves as DST_NOCACHE.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During the creation of xfrm_dst bundle, always take ref count when
allocating the dst. This way, xfrm_bundle_create() will form a linked
list of dst with dst->child pointing to a ref counted dst child. And
the returned dst pointer is also ref counted. This makes the link from
the flow cache to this dst now ref counted properly.
As the dst is always ref counted properly, we can safely mark
DST_NOGC flag so dst_release() will release dst based on refcnt only.
And dst gc is no longer needed and all dst_free() and its related
function calls should be replaced with dst_release() or
dst_release_immediate().
The special handling logic for dst->child in dst_destroy() can be
replaced with a simple dst_release_immediate() call on the child to
release the whole list linked by dst->child pointer.
Previously used DST_NOHASH flag is not needed anymore as well. The
reason that DST_NOHASH is used in the existing code is mainly to prevent
the dst inserted in the fib tree to be wrongly destroyed during the
deletion of the xfrm_dst bundle. So in the existing code, DST_NOHASH
flag is marked in all the dst children except the one which is in the
fib tree.
However, with this patch series to remove dst gc logic and release dst
only based on ref count, it is safe to release all the children from a
xfrm_dst bundle as long as the dst children are all ref counted
properly which is already the case in the existing code.
So, this patch removes the use of DST_NOHASH flag.
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now we will force to do garbage collection if any policy removed in
xfrm_policy_flush(). But during xfrm_net_exit(). We call flow_cache_fini()
first and set set fc->percpu to NULL. Then after we call xfrm_policy_fini()
-> frxm_policy_flush() -> flow_cache_flush(), we will get NULL pointer
dereference when check percpu_empty. The code path looks like:
flow_cache_fini()
- fc->percpu = NULL
xfrm_policy_fini()
- xfrm_policy_flush()
- xfrm_garbage_collect()
- flow_cache_flush()
- flow_cache_percpu_empty()
- fcp = per_cpu_ptr(fc->percpu, cpu)
To reproduce, just add ipsec in netns and then remove the netns.
v2:
As Xin Long suggested, since only two other places need to call it. move
xfrm_garbage_collect() outside xfrm_policy_flush().
v3:
Fix subject mismatch after v2 fix.
Fixes: 35db069121 ("xfrm: do the garbage collection after flushing policy")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add XFRMA_ENCAP, UDP encapsulation port, to km_migrate announcement
to userland. Only add if XFRMA_ENCAP was in user migrate request.
Signed-off-by: Antony Antony <antony@phenome.org>
Reviewed-by: Richard Guy Briggs <rgb@tricolour.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add UDP encapsulation port to XFRM_MSG_MIGRATE using an optional
netlink attribute XFRMA_ENCAP.
The devices that support IKE MOBIKE extension (RFC-4555 Section 3.8)
could go to sleep for a few minutes and wake up. When it wake up the
NAT mapping could have expired, the device send a MOBIKE UPDATE_SA
message to migrate the IPsec SA. The change could be a change UDP
encapsulation port, IP address, or both.
Reported-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Antony Antony <antony@phenome.org>
Reviewed-by: Richard Guy Briggs <rgb@tricolour.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In commit d77e38e612 ("xfrm: Add an IPsec hardware offloading API") we
make xfrm_device.o only compiled when enable option CONFIG_XFRM_OFFLOAD.
But this will make xfrm_dev_event() missing if we only enable default XFRM
options.
Then if we set down and unregister an interface with IPsec on it. there
will no xfrm_garbage_collect(), which will cause dev usage count hold and
get error like:
unregister_netdevice: waiting for <dev> to become free. Usage count = 4
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
During xfrm migration copy replay and preplay sequence numbers
from the previous state.
Here is a tcpdump output showing the problem.
10.0.10.46 is running vanilla kernel, is the IKE/IPsec responder.
After the migration it sent wrong sequence number, reset to 1.
The migration is from 10.0.0.52 to 10.0.0.53.
IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7cf), length 136
IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7cf), length 136
IP 10.0.0.52.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d0), length 136
IP 10.0.10.46.4500 > 10.0.0.52.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x7d0), length 136
IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa inf2[I]
IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa inf2[R]
IP 10.0.0.53.4500 > 10.0.10.46.4500: NONESP-encap: isakmp: child_sa inf2[I]
IP 10.0.10.46.4500 > 10.0.0.53.4500: NONESP-encap: isakmp: child_sa inf2[R]
IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d1), length 136
NOTE: next sequence is wrong 0x1
IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x1), length 136
IP 10.0.0.53.4500 > 10.0.10.46.4500: UDP-encap: ESP(spi=0x43ef462d,seq=0x7d2), length 136
IP 10.0.10.46.4500 > 10.0.0.53.4500: UDP-encap: ESP(spi=0xca1c282d,seq=0x2), length 136
Signed-off-by: Antony Antony <antony@phenome.org>
Reviewed-by: Richard Guy Briggs <rgb@tricolour.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Fixes the following sparse warning:
net/xfrm/xfrm_device.c:141:5: warning:
symbol 'xfrm_dev_register' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Use memdup_user() helper instead of open-coding to simplify the code.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Upon NETDEV_DOWN event, all xfrm_state objects which are bound to
the device are flushed.
The condition for this is wrong, though, testing dev->hw_features
instead of dev->features. If a device has non-user-modifiable
NETIF_F_HW_ESP, then its xfrm_state objects are not flushed,
causing a crash later on after the device is deleted.
Check dev->features instead of dev->hw_features.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When CONFIG_XFRM_SUB_POLICY=y, xfrm_dst stores a copy of the flowi for
that dst. Unfortunately, the code that allocates and fills this copy
doesn't care about what type of flowi (flowi, flowi4, flowi6) gets
passed. In multiple code paths (from raw_sendmsg, from TCP when
replying to a FIN, in vxlan, geneve, and gre), the flowi that gets
passed to xfrm is actually an on-stack flowi4, so we end up reading
stuff from the stack past the end of the flowi4 struct.
Since xfrm_dst->origin isn't used anywhere following commit
ca116922af ("xfrm: Eliminate "fl" and "pol" args to
xfrm_bundle_ok()."), just get rid of it. xfrm_dst->partner isn't used
either, so get rid of that too.
Fixes: 9d6ec93801 ("ipv4: Use flowi4 in public route lookup interfaces.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull networking updates from David Millar:
"Here are some highlights from the 2065 networking commits that
happened this development cycle:
1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)
2) Add a generic XDP driver, so that anyone can test XDP even if they
lack a networking device whose driver has explicit XDP support
(me).
3) Sparc64 now has an eBPF JIT too (me)
4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
Starovoitov)
5) Make netfitler network namespace teardown less expensive (Florian
Westphal)
6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)
7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)
8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)
9) Multiqueue support in stmmac driver (Joao Pinto)
10) Remove TCP timewait recycling, it never really could possibly work
well in the real world and timestamp randomization really zaps any
hint of usability this feature had (Soheil Hassas Yeganeh)
11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
Aleksandrov)
12) Add socket busy poll support to epoll (Sridhar Samudrala)
13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
and several others)
14) IPSEC hw offload infrastructure (Steffen Klassert)"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
tipc: refactor function tipc_sk_recv_stream()
tipc: refactor function tipc_sk_recvmsg()
net: thunderx: Optimize page recycling for XDP
net: thunderx: Support for XDP header adjustment
net: thunderx: Add support for XDP_TX
net: thunderx: Add support for XDP_DROP
net: thunderx: Add basic XDP support
net: thunderx: Cleanup receive buffer allocation
net: thunderx: Optimize CQE_TX handling
net: thunderx: Optimize RBDR descriptor handling
net: thunderx: Support for page recycling
ipx: call ipxitf_put() in ioctl error path
net: sched: add helpers to handle extended actions
qed*: Fix issues in the ptp filter config implementation.
qede: Fix concurrency issue in PTP Tx path processing.
stmmac: Add support for SIMATIC IOT2000 platform
net: hns: fix ethtool_get_strings overflow in hns driver
tcp: fix wraparound issue in tcp_lp
bpf, arm64: fix jit branch offset related to ldimm64
bpf, arm64: implement jiting of BPF_XADD
...
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.12:
API:
- Add batch registration for acomp/scomp
- Change acomp testing to non-unique compressed result
- Extend algorithm name limit to 128 bytes
- Require setkey before accept(2) in algif_aead
Algorithms:
- Add support for deflate rfc1950 (zlib)
Drivers:
- Add accelerated crct10dif for powerpc
- Add crc32 in stm32
- Add sha384/sha512 in ccp
- Add 3des/gcm(aes) for v5 devices in ccp
- Add Queue Interface (QI) backend support in caam
- Add new Exynos RNG driver
- Add ThunderX ZIP driver
- Add driver for hardware random generator on MT7623 SoC"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
crypto: stm32 - Fix OF module alias information
crypto: algif_aead - Require setkey before accept(2)
crypto: scomp - add support for deflate rfc1950 (zlib)
crypto: scomp - allow registration of multiple scomps
crypto: ccp - Change ISR handler method for a v5 CCP
crypto: ccp - Change ISR handler method for a v3 CCP
crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
crypto: ccp - Disable interrupts early on unload
crypto: ccp - Use only the relevant interrupt bits
hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
dt-bindings: hwrng: Add Mediatek hardware random generator bindings
crypto: crct10dif-vpmsum - Fix missing preempt_disable()
crypto: testmgr - replace compression known answer test
crypto: acomp - allow registration of multiple acomps
hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
padata: get_next is never NULL
crypto: exynos - Add new Exynos RNG driver
...
Current code silently ignores driver errors when configuring
IPSec offload xfrm_state, and falls back to host-based crypto.
Fail the xfrm_state creation if the driver has an error, because
the NIC offloading was explicitly requested by the user program.
This will communicate back to the user that there was an error.
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In xfrm_input() when called from GRO, async == 0, and we end up
skipping the processing in xfrm4_transport_finish(). GRO path will
always skip the NF_HOOK, so we don't need the special-case for
!NETFILTER during GRO processing.
Fixes: 7785bba299 ("esp: Add a software GRO codepath")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Now xfrm garbage collection can be triggered by 'ip xfrm policy del'.
These is no reason not to do it after flushing policies, especially
considering that 'garbage collection deferred' is only triggered
when it reaches gc_thresh.
It's no good that the policy is gone but the xdst still hold there.
The worse thing is that xdst->route/orig_dst is also hold and can
not be released even if the orig_dst is already expired.
This patch is to do the garbage collection if there is any policy
removed in xfrm_policy_flush.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-04-20
This adds the basic infrastructure for IPsec hardware
offloading, it creates a configuration API and adjusts
the packet path.
1) Add the needed netdev features to configure IPsec offloads.
2) Add the IPsec hardware offloading API.
3) Prepare the ESP packet path for hardware offloading.
4) Add gso handlers for esp4 and esp6, this implements
the software fallback for GSO packets.
5) Add xfrm replay handler functions for offloading.
6) Change ESP to use a synchronous crypto algorithm on
offloading, we don't have the option for asynchronous
returns when we handle IPsec at layer2.
7) Add a xfrm validate function to validate_xmit_skb. This
implements the software fallback for non GSO packets.
8) Set the inner_network and inner_transport members of
the SKB, as well as encapsulation, to reflect the actual
positions of these headers, and removes them only once
encryption is done on the payload.
From Ilan Tayari.
9) Prepare the ESP GRO codepath for hardware offloading.
10) Fix incorrect null pointer check in esp6.
From Colin Ian King.
11) Fix for the GSO software fallback path to detect the
fallback correctly.
From Ilan Tayari.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On IPsec hardware offloading, we already get a secpath with
valid state attached when the packet enters the GRO handlers.
So check for hardware offload and skip the state lookup in this
case.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Both esp4 and esp6 used to assume that the SKB payload is encrypted
and therefore the inner_network and inner_transport offsets are
not relevant.
When doing crypto offload in the NIC, this is no longer the case
and the NIC driver needs these offsets so it can do TX TCP checksum
offloading.
This patch sets the inner_network and inner_transport members of
the SKB, as well as encapsulation, to reflect the actual positions
of these headers, and removes them only once encryption is done
on the payload.
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we do IPsec offloading, we need a fallback for
packets that were targeted to be IPsec offloaded but
rerouted to a device that does not support IPsec offload.
For that we add a function that checks the offloading
features of the sending device and and flags the
requirement of a fallback before it calls the IPsec
output function. The IPsec output function adds the IPsec
trailer and does encryption if needed.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds functions that handles IPsec sequence
numbers for GSO segments and TSO offloading. We need
to calculate and update the sequence numbers based
on the segments that GSO/TSO will generate. We need
this to keep software and hardware sequence number
counter in sync.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch extends the xfrm_type by an encap function pointer
and implements esp4_gso_encap and esp6_gso_encap. These functions
doing the basic esp encapsulation for a GSO packet. In case the
GSO packet needs to be segmented in software, we add gso_segment
functions. This codepath is going to be used on esp hardware
offloads.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.
Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We add a struct xfrm_type_offload so that we have the offloaded
codepath separated to the non offloaded codepath. With this the
non offloade and the offloaded codepath can coexist.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pass the new extended ACK reporting struct to all of the generic
netlink parsing functions. For now, pass NULL in almost all callers
(except for some in the core.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the base infrastructure and UAPI for netlink extended ACK
reporting. All "manual" calls to netlink_ack() pass NULL for now and
thus don't get extended ACK reporting.
Big thanks goes to Pablo Neira Ayuso for not only bringing up the
whole topic at netconf (again) but also coming up with the nlattr
passing trick and various other ideas.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-04-11
1) Remove unused field from struct xfrm_mgr.
2) Code size optimizations for the xfrm prefix hash and
address match.
3) Branch optimization for addr4_match.
All patches from Alexey Dobriyan.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the xfrm_user code to use the actual array size
rather than the hard-coded CRYPTO_MAX_ALG_NAME length. This is
because the array size is fixed at 64 bytes while we want to increase
the in-kernel CRYPTO_MAX_ALG_NAME value.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Merge xfrm_user validation fixes from Andy Whitcroft:
"Two patches we are applying to Ubuntu for XFRM_MSG_NEWAE validation
issue reported by ZDI.
The first of these is the primary fix, and the second is for a more
theoretical issue that Kees pointed out when reviewing the first"
* emailed patches from Andy Whitcroft <apw@canonical.com>:
xfrm_user: validate XFRM_MSG_NEWAE incoming ESN size harder
xfrm_user: validate XFRM_MSG_NEWAE XFRMA_REPLAY_ESN_VAL replay_window
Kees Cook has pointed out that xfrm_replay_state_esn_len() is subject to
wrapping issues. To ensure we are correctly ensuring that the two ESN
structures are the same size compare both the overall size as reported
by xfrm_replay_state_esn_len() and the internal length are the same.
CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a new xfrm state is created during an XFRM_MSG_NEWSA call we
validate the user supplied replay_esn to ensure that the size is valid
and to ensure that the replay_window size is within the allocated
buffer. However later it is possible to update this replay_esn via a
XFRM_MSG_NEWAE call. There we again validate the size of the supplied
buffer matches the existing state and if so inject the contents. We do
not at this point check that the replay_window is within the allocated
memory. This leads to out-of-bounds reads and writes triggered by
netlink packets. This leads to memory corruption and the potential for
priviledge escalation.
We already attempt to validate the incoming replay information in
xfrm_new_ae() via xfrm_replay_verify_len(). This confirms that the user
is not trying to change the size of the replay state buffer which
includes the replay_esn. It however does not check the replay_window
remains within that buffer. Add validation of the contained
replay_window.
CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steffen Klassert says:
====================
pull request (net): ipsec 2017-03-06
1) Fix lockdep splat on xfrm policy subsystem initialization.
From Florian Westphal.
2) When using socket policies on IPv4-mapped IPv6 addresses,
we access the flow informations of the wrong address family
what leads to an out of bounds access. Fix this by using
the family we get with the dst_entry, like we do it for the
standard policy lookup.
3) vti6 can report a PMTU below IPV6_MIN_MTU. Fix this by
adding a check for that before sending a ICMPV6_PKT_TOOBIG
message.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix xfrm_neigh_lookup to provide dst->path to the
neigh_lookup dst_ops method.
When skb is provided, the IP address in packet should already
match the dst->path address family. But for the non-skb case,
we should consider the last tunnel address as nexthop address.
Fixes: f894cbf847 ("net: Add optional SKB arg to dst_ops->neigh_lookup().")
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2017-02-16
1) Make struct xfrm_input_afinfo const, nothing writes to it.
From Florian Westphal.
2) Remove all places that write to the afinfo policy backend
and make the struct const then.
From Florian Westphal.
3) Prepare for packet consuming gro callbacks and add
ESP GRO handlers. ESP packets can be decapsulated
at the GRO layer then. It saves a round through
the stack for each ESP packet.
Please note that this has a merge coflict between commit
63fca65d08 ("net: add confirm_neigh method to dst_ops")
from net-next and
3d7d25a68e ("xfrm: policy: remove garbage_collect callback")
a2817d8b27 ("xfrm: policy: remove family field")
from ipsec-next.
The conflict can be solved as it is done in linux-next.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds GRO ifrastructure and callbacks for ESP on
ipv4 and ipv6.
In case the GRO layer detects an ESP packet, the
esp{4,6}_gro_receive() function does a xfrm state lookup
and calls the xfrm input layer if it finds a matching state.
The packet will be decapsulated and reinjected it into layer 2.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We need to keep per packet offloading informations across
the layers. So we extend the sec_path to carry these for
the input and output offload codepath.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Add a new helper to set the secpath to the skb.
This avoids code duplication, as this is used
in multiple places.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
On IPv4-mapped IPv6 addresses sk_family is AF_INET6,
but the flow informations are created based on AF_INET.
So the routing set up 'struct flowi4' but we try to
access 'struct flowi6' what leads to an out of bounds
access. Fix this by using the family we get with the
dst_entry, like we do it for the standard policy lookup.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Alternative is to keep it an make the (unused) afinfo arg const to avoid
the compiler warnings once the afinfo structs get constified.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Only needed it to register the policy backend at init time.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Just call xfrm_garbage_collect_deferred() directly.
This gets rid of a write to afinfo in register/unregister and allows to
constify afinfo later on.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Nothing checks the return value. Also, the errors returned on unregister
are impossible (we only support INET and INET6, so no way
xfrm_policy_afinfo[afinfo->family] can be anything other than 'afinfo'
itself).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The comment makes it look like get_tos() is used to validate something,
but it turns out the comment was about xfrm_find_bundle() which got removed
years ago.
xfrm_get_tos will return either the tos (ipv4) or 0 (ipv6).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Nothing writes to these structures (the module owner was not used).
While at it, size xfrm_input_afinfo[] by the highest existing xfrm family
(INET6), not AF_MAX.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Dmitry reports following splat:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 13059 Comm: syz-executor1 Not tainted 4.10.0-rc7-next-20170207 #1
[..]
spin_lock_bh include/linux/spinlock.h:304 [inline]
xfrm_policy_flush+0x32/0x470 net/xfrm/xfrm_policy.c:963
xfrm_policy_fini+0xbf/0x560 net/xfrm/xfrm_policy.c:3041
xfrm_net_init+0x79f/0x9e0 net/xfrm/xfrm_policy.c:3091
ops_init+0x10a/0x530 net/core/net_namespace.c:115
setup_net+0x2ed/0x690 net/core/net_namespace.c:291
copy_net_ns+0x26c/0x530 net/core/net_namespace.c:396
create_new_namespaces+0x409/0x860 kernel/nsproxy.c:106
unshare_nsproxy_namespaces+0xae/0x1e0 kernel/nsproxy.c:205
SYSC_unshare kernel/fork.c:2281 [inline]
Problem is that when we get error during xfrm_net_init we will call
xfrm_policy_fini which will acquire xfrm_policy_lock before it was
initialized. Just move it around so locks get set up first.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 283bc9f35b ("xfrm: Namespacify xfrm state/policy locks")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
We have many gro cells users, so lets move the code to avoid
duplication.
This creates a CONFIG_GRO_CELLS option.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add confirm_neigh method to dst_ops and use it from IPv4 and IPv6
to lookup and confirm the neighbour. Its usage via the new helper
dst_confirm_neigh() should be restricted to MSG_PROBE users for
performance reasons.
For XFRM prefer the last tunnel address, if present. With help
from Steffen Klassert.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a dummy network device so that we can
use gro_cells for IPsec GRO. With this, we handle IPsec
GRO with no impact on the generic networking code.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Dan reports following smatch warning:
net/xfrm/xfrm_state.c:659
error: we previously assumed 'afinfo' could be null (see line 651)
649 struct xfrm_state_afinfo *afinfo = xfrm_state_afinfo_get_rcu(family);
651 if (afinfo)
...
658 }
659 afinfo->init_temprop(x, tmpl, daddr, saddr);
I am resonably sure afinfo cannot be NULL here.
xfrm_state4.c and state6.c are both part of ipv4/ipv6 (depends on
CONFIG_XFRM, a boolean) but even if ipv6 is a module state6.c can't
be removed (ipv6 lacks module_exit so it cannot be removed).
The only callers for xfrm6_fini that leads to state backend unregister
are error unwinding paths that can be called during ipv6 init function.
So after ipv6 module is loaded successfully the state backend cannot go
away anymore.
The family value from policy lookup path is taken from dst_entry, so
that should always be AF_INET(6).
However, since this silences the warning and avoids readers of this
code wondering about possible null deref it seems preferrable to
be defensive and just add the old check back.
Fixes: 711059b975 ("xfrm: add and use xfrm_state_afinfo_get_rcu")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Instead of:
if (foo) {
unlock();
return bar();
}
unlock();
do:
unlock();
if (foo)
return bar();
This is ok because rcu protected structure is only dereferenced before
the conditional.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_init_tempstate is always called from within rcu read side section.
We can thus use a simpler function that doesn't call rcu_read_lock
again.
While at it, also make xfrm_init_tempstate return value void, the
return value was never tested.
A followup patch will replace remaining callers of xfrm_state_get_afinfo
with xfrm_state_afinfo_get_rcu variant and then remove the 'old'
get_afinfo interface.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm/xfrm_state.c:1973:21: error: incompatible types in comparison expression (different address spaces)
Harmless, but lets fix it to reduce the noise.
While at it, get rid of unneeded NULL check, its never hit:
net/ipv4/xfrm4_state.c: xfrm_state_register_afinfo(&xfrm4_state_afinfo);
net/ipv6/xfrm6_state.c: return xfrm_state_register_afinfo(&xfrm6_state_afinfo);
net/ipv6/xfrm6_state.c: xfrm_state_unregister_afinfo(&xfrm6_state_afinfo);
... are the only callsites.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Once flow cache gets removed the mtu initialisation happens for every skb
that gets an xfrm attached, so this lock starts to show up in perf.
It is not obvious why this lock is required -- the caller holds
reference on the state struct, type->destructor is only called from the
state gc worker (all state structs on gc list must have refcount 0).
xfrm_init_state already has been called (else private data accessed
by type->get_mtu() would not be set up).
So just remove the lock -- the race on the state (DEAD?) doesn't
matter (could change right after dropping the lock too).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
o s/descentant/descendant
o s/workarbound/workaround
Signed-off-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
ktime_set(S,N) was required for the timespec storage type and is still
useful for situations where a Seconds and Nanoseconds part of a time value
needs to be converted. For anything where the Seconds argument is 0, this
is pointless and can be replaced with a simple assignment.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
This was entirely automated, using the script by Al:
PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
$(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)
to do the replacement at the end of the merge window.
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull smp hotplug updates from Thomas Gleixner:
"This is the final round of converting the notifier mess to the state
machine. The removal of the notifiers and the related infrastructure
will happen around rc1, as there are conversions outstanding in other
trees.
The whole exercise removed about 2000 lines of code in total and in
course of the conversion several dozen bugs got fixed. The new
mechanism allows to test almost every hotplug step standalone, so
usage sites can exercise all transitions extensively.
There is more room for improvement, like integrating all the
pointlessly different architecture mechanisms of synchronizing,
setting cpus online etc into the core code"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
tracing/rb: Init the CPU mask on allocation
soc/fsl/qbman: Convert to hotplug state machine
soc/fsl/qbman: Convert to hotplug state machine
zram: Convert to hotplug state machine
KVM/PPC/Book3S HV: Convert to hotplug state machine
arm64/cpuinfo: Convert to hotplug state machine
arm64/cpuinfo: Make hotplug notifier symmetric
mm/compaction: Convert to hotplug state machine
iommu/vt-d: Convert to hotplug state machine
mm/zswap: Convert pool to hotplug state machine
mm/zswap: Convert dst-mem to hotplug state machine
mm/zsmalloc: Convert to hotplug state machine
mm/vmstat: Convert to hotplug state machine
mm/vmstat: Avoid on each online CPU loops
mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead()
tracing/rb: Convert to hotplug state machine
oprofile/nmi timer: Convert to hotplug state machine
net/iucv: Use explicit clean up labels in iucv_init()
x86/pci/amd-bus: Convert to hotplug state machine
x86/oprofile/nmi: Convert to hotplug state machine
...
Couple conflicts resolved here:
1) In the MACB driver, a bug fix to properly initialize the
RX tail pointer properly overlapped with some changes
to support variable sized rings.
2) In XGBE we had a "CONFIG_PM" --> "CONFIG_PM_SLEEP" fix
overlapping with a reorganization of the driver to support
ACPI, OF, as well as PCI variants of the chip.
3) In 'net' we had several probe error path bug fixes to the
stmmac driver, meanwhile a lot of this code was cleaned up
and reorganized in 'net-next'.
4) The cls_flower classifier obtained a helper function in
'net-next' called __fl_delete() and this overlapped with
Daniel Borkamann's bug fix to use RCU for object destruction
in 'net'. It also overlapped with Jiri's change to guard
the rhashtable_remove_fast() call with a check against
tc_skip_sw().
5) In mlx4, a revert bug fix in 'net' overlapped with some
unrelated changes in 'net-next'.
6) In geneve, a stale header pointer after pskb_expand_head()
bug fix in 'net' overlapped with a large reorganization of
the same code in 'net-next'. Since the 'net-next' code no
longer had the bug in question, there was nothing to do
other than to simply take the 'net-next' hunks.
Signed-off-by: David S. Miller <davem@davemloft.net>
It doesn't support to run 32bit 'ip' to set xfrm objdect on 64bit host.
But the return value is unknown for user program:
ip xfrm policy list
RTNETLINK answers: Unknown error 524
Replace ENOTSUPP with EOPNOTSUPP:
ip xfrm policy list
RTNETLINK answers: Operation not supported
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
if we succeed grabbing the refcount, then
if (err && !xfrm_pol_hold_rcu)
will evaluate to false so this hits last else branch which then
sets policy to ERR_PTR(0).
Fixes: ae33786f73 ("xfrm: policy: only use rcu in xfrm_sk_policy_lookup")
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Tested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Install the callbacks via the state machine. Use multi state support to avoid
custom list handling for the multiple instances.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: netdev@vger.kernel.org
Cc: rt@linutronix.de
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20161103145021.28528-10-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2016-10-25
Just a leftover from the last development cycle.
1) Remove some unused code, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Not used anymore since 2009 (9e0d57fd6d,
'xfrm: SAD entries do not expire correctly after suspend-resume').
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This is to use the generic interfaces snmp_get_cpu_field{,64}_batch to
aggregate the data by going through all the items of each cpu sequentially.
Signed-off-by: Jia He <hejianet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2016-09-23
Only two patches this time:
1) Fix a comment reference to struct xfrm_replay_state_esn.
From Richard Guy Briggs.
2) Convert xfrm_state_lookup to rcu, we don't need the
xfrm_state_lock anymore in the input path.
From Florian Westphal.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is called from the packet input path, we get lock contention
if many cpus handle ipsec in parallel.
After recent rcu conversion it is safe to call __xfrm_state_lookup
without the spinlock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
commit 1a6509d991 ("[IPSEC]: Add support for combined mode algorithms")
introduced aead. The function attach_aead kmemdup()s the algorithm
name during xfrm_state_construct().
However this memory is never freed.
Implementation has since been slightly modified in
commit ee5c23176f ("xfrm: Clone states properly on migration")
without resolving this leak.
This patch adds a kfree() call for the aead algorithm name.
Fixes: 1a6509d991 ("[IPSEC]: Add support for combined mode algorithms")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Acked-by: Rami Rosen <roszenrami@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Conflicts:
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/qlogic/qed/qed_dcbx.c
drivers/net/phy/Kconfig
All conflicts were cases of overlapping commits.
Signed-off-by: David S. Miller <davem@davemloft.net>
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either
built-in or as a module, use that macro instead of open coding the same.
Using the macro makes the code more readable by helping abstract away some
of the Kconfig built-in and module enable details.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we fail to attach the security context in xfrm_state_construct()
we'll return 0 as error value which, in turn, will wrongly claim success
to userland when, in fact, we won't be adding / updating the XFRM state.
This is a regression introduced by commit fd21150a0f ("[XFRM] netlink:
Inline attach_encap_tmpl(), attach_sec_ctx(), and attach_one_addr()").
Fix it by propagating the error returned by security_xfrm_state_alloc()
in this case.
Fixes: fd21150a0f ("[XFRM] netlink: Inline attach_encap_tmpl()...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
ipsec-next 2016-09-08
1) Constify the xfrm_replay structures. From Julia Lawall
2) Protect xfrm state hash tables with rcu, lookups
can be done now without acquiring xfrm_state_lock.
From Florian Westphal.
3) Protect xfrm policy hash tables with rcu, lookups
can be done now without acquiring xfrm_policy_lock.
From Florian Westphal.
4) We don't need to have a garbage collector list per
namespace anymore, so use a global one instead.
From Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
proc_dointvec limits the values to INT_MAX in u32 sysctl entries.
proc_douintvec allows to write upto UINT_MAX.
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 5b8ef3415a
("xfrm: Remove ancient sleeping when the SA is in acquire state")
gc does not need any per-netns data anymore.
As far as gc is concerned all state structs are the same, so we
can use a global work struct for it.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
An earlier patch accidentally replaced a write_lock_bh
with a spin_unlock_bh. Fix this by using spin_lock_bh
instead.
Fixes: 9d0380df62 ("xfrm: policy: convert policy_lock to spinlock")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After earlier patches conversions all spots acquire the writer lock and
we can now convert this to a normal spinlock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
It doesn't seem that important.
We now get inconsistent view of the counters, but those are stale anyway
right after we drop the lock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Don't acquire the readlock anymore and rely on rcu alone.
In case writer on other CPU changed policy at the wrong moment (after we
obtained sk policy pointer but before we could obtain the reference)
just repeat the lookup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
If we don't hold the policy lock anymore the refcnt might
already be 0, i.e. policy struct is about to be free'd.
Switch to atomic_inc_not_zero to avoid this.
On removal policies are already unlinked from the tables (lists)
before the last _put occurs so we are not supposed to find the same
'dead' entry on the next loop, so its safe to just repeat the lookup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Once xfrm_policy_lookup_bytype doesn't grab xfrm_policy_lock anymore its
possible for a hash resize to occur in parallel.
Use sequence counter to block lookup in case a resize is in
progress and to also re-lookup in case hash table was altered
in the mean time (might cause use to not find the best-match).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Since commit 56f047305d
("xfrm: add rcu grace period in xfrm_policy_destroy()") xfrm policy
objects are already free'd via rcu.
In order to make more places lockless (i.e. use rcu_read_lock instead of
grabbing read-side of policy rwlock) we only need to:
- use rcu_assign_pointer to store address of new hash table backend memory
- add rcu barrier so that freeing of old memory is delayed (expansion
and free happens from system workqueue, so synchronize_rcu is fine)
- use rcu_dereference to fetch current address of the hash table.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This is required once we allow lockless readers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Running LTP 'icmp-uni-basic.sh -6 -p ipcomp -m tunnel' test over
openvswitch + veth can trigger kernel panic:
BUG: unable to handle kernel NULL pointer dereference
at 00000000000000e0 IP: [<ffffffff8169d1d2>] xfrm_input+0x82/0x750
...
[<ffffffff816d472e>] xfrm6_rcv_spi+0x1e/0x20
[<ffffffffa082c3c2>] xfrm6_tunnel_rcv+0x42/0x50 [xfrm6_tunnel]
[<ffffffffa082727e>] tunnel6_rcv+0x3e/0x8c [tunnel6]
[<ffffffff8169f365>] ip6_input_finish+0xd5/0x430
[<ffffffff8169fc53>] ip6_input+0x33/0x90
[<ffffffff8169f1d5>] ip6_rcv_finish+0xa5/0xb0
...
It seems that tunnel.ip6 can have garbage values and also dereferenced
without a proper check, only tunnel.ip4 is being verified. Fix it by
adding one more if block for AF_INET6 and initialize tunnel.ip6 with NULL
inside xfrm6_rcv_spi() (which is similar to xfrm4_rcv_spi()).
Fixes: 049f8e2 ("xfrm: Override skb->mark with tunnel->parm.i_key in xfrm_input")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
push the lock down, after earlier patches we can rely on rcu to
make sure state struct won't go away.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Before xfrm_state_find() can use rcu_read_lock instead of xfrm_state_lock
we need to switch users of the hash table to assign/obtain the pointers
with the appropriate rcu helpers.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Once xfrm_state_find is lockless we have to cope with a concurrent
resize opertion.
We use a sequence counter to block in case a resize is in progress
and to detect if we might have missed a state that got moved to
a new hash table.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The hash table backend memory and the state structs are free'd via
kfree/vfree.
Once we only rely on rcu during lookups we have to make sure no other cpu
is currently accessing this before doing the free.
Free operations already happen from worker so we can use synchronize_rcu
to wait until concurrent readers are done.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Once xfrm_state_lookup_byaddr no longer acquires the state lock another
cpu might be freeing the state entry at the same time.
To detect this we use atomic_inc_not_zero, we then signal -EAGAIN to
caller in case our result was stale.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This is required once we allow lockless access of bydst/bysrc hash tables.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The xfrm_replay structures are never modified, so declare them as const.
Done with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Whenever thresholds are changed the hash tables are rebuilt. This is
done by enumerating all policies and hashing and inserting them into
the right table according to the thresholds and direction.
Because socket policies are also contained in net->xfrm.policy_all but
no hash tables are defined for their direction (dir + XFRM_POLICY_MAX)
this causes a NULL or invalid pointer dereference after returning from
policy_hash_bysel() if the rebuild is done while any socket policies
are installed.
Since the rebuild after changing thresholds is scheduled this crash
could even occur if the userland sets thresholds seemingly before
installing any socket policies.
Fixes: 53c2e285f9 ("xfrm: Do not hash socket policies")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
During fuzzing I regularly run into this WARN(). According to Herbert Xu,
this "certainly shouldn't be a WARN, it probably shouldn't print anything
either".
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
AFAICT this message is just printed whenever input validation fails.
This is a normal failure and we shouldn't be dumping the stack over it.
Looks like it was originally a printk that was maybe incorrectly
upgraded to a WARN:
commit 62db5cfd70
Author: stephen hemminger <shemminger@vyatta.com>
Date: Wed May 12 06:37:06 2010 +0000
xfrm: add severity to printk
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
If we hit any of the error conditions inside xfrm_dump_sa(), then
xfrm_state_walk_init() never gets called. However, we still call
xfrm_state_walk_done() from xfrm_dump_sa_done(), which will crash
because the state walk was never initialized properly.
We can fix this by setting cb->args[0] only after we've processed the
first element and checking this before calling xfrm_state_walk_done().
Fixes: d3623099d3 ("ipsec: add support of limited SA dump")
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In netdevice.h we removed the structure in net-next that is being
changes in 'net'. In macsec.c and rtnetlink.c we have overlaps
between fixes in 'net' and the u64 attribute changes in 'net-next'.
The mlx5 conflicts have to do with vxlan support dependencies.
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2016-05-04
1) The flowcache can hit an OOM condition if too
many entries are in the gc_list. Fix this by
counting the entries in the gc_list and refuse
new allocations if the value is too high.
2) The inner headers are invalid after a xfrm transformation,
so reset the skb encapsulation field to ensure nobody tries
access the inner headers. Otherwise tunnel devices stacked
on top of xfrm may build the outer headers based on wrong
informations.
3) Add pmtu handling to vti, we need it to report
pmtu informations for local generated packets.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A crash is observed when a decrypted packet is processed in receive
path. get_rps_cpus() tries to dereference the skb->dev fields but it
appears that the device is freed from the poison pattern.
[<ffffffc000af58ec>] get_rps_cpu+0x94/0x2f0
[<ffffffc000af5f94>] netif_rx_internal+0x140/0x1cc
[<ffffffc000af6094>] netif_rx+0x74/0x94
[<ffffffc000bc0b6c>] xfrm_input+0x754/0x7d0
[<ffffffc000bc0bf8>] xfrm_input_resume+0x10/0x1c
[<ffffffc000ba6eb8>] esp_input_done+0x20/0x30
[<ffffffc0000b64c8>] process_one_work+0x244/0x3fc
[<ffffffc0000b7324>] worker_thread+0x2f8/0x418
[<ffffffc0000bb40c>] kthread+0xe0/0xec
-013|get_rps_cpu(
| dev = 0xFFFFFFC08B688000,
| skb = 0xFFFFFFC0C76AAC00 -> (
| dev = 0xFFFFFFC08B688000 -> (
| name =
"......................................................
| name_hlist = (next = 0xAAAAAAAAAAAAAAAA, pprev =
0xAAAAAAAAAAA
Following are the sequence of events observed -
- Encrypted packet in receive path from netdevice is queued
- Encrypted packet queued for decryption (asynchronous)
- Netdevice brought down and freed
- Packet is decrypted and returned through callback in esp_input_done
- Packet is queued again for process in network stack using netif_rx
Since the device appears to have been freed, the dereference of
skb->dev in get_rps_cpus() leads to an unhandled page fault
exception.
Fix this by holding on to device reference when queueing packets
asynchronously and releasing the reference on call back return.
v2: Make the change generic to xfrm as mentioned by Steffen and
update the title to xfrm
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jerome Stanislaus <jeromes@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The code wants to prevent compat code from receiving messages. Use
in_compat_syscall for this.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The inner headers are invalid after a xfrm transformation.
So reset the skb encapsulation field to ensure nobody tries
to access the inner headers.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch removes the last reference to hash and ablkcipher from
IPsec and replaces them with ahash and skcipher respectively. For
skcipher there is currently no difference at all, while for ahash
the current code is actually buggy and would prevent asynchronous
algorithms from being discovered.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: David S. Miller <davem@davemloft.net>
Skb_gso_segment() uses skb control block during segmentation.
This patch adds 32-bytes room for previous control block which
will be copied into all resulting segments.
This patch fixes kernel crash during fragmenting forwarded packets.
Fragmentation requires valid IP CB in skb for clearing ip options.
Also patch removes custom save/restore in ovs code, now it's redundant.
Signed-off-by: Konstantin Khlebnikov <koct9i@gmail.com>
Link: http://lkml.kernel.org/r/CALYGNiP-0MZ-FExV2HutTvE9U-QQtkKSoE--KN=JQE5STYsjAA@mail.gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2015-12-22
Just one patch to fix dst_entries_init with multiple namespaces.
From Dan Streetman.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
XFRM can deal with SYNACK messages, sent while listener socket
is not locked. We add proper rcu protection to __xfrm_sk_clone_policy()
and xfrm_sk_policy_lookup()
This might serve as the first step to remove xfrm.xfrm_policy_lock
use in fast path.
Fixes: fa76ce7328 ("inet: get rid of central tcp/dccp listener timer")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We will soon switch sk->sk_policy[] to RCU protection,
as SYNACK packets are sent while listener socket is not locked.
This patch simply adds RCU grace period before struct xfrm_policy
freeing, and the corresponding rcu_head in struct xfrm_policy.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TCP SYNACK messages might now be attached to request sockets.
XFRM needs to get back to a listener socket.
Adds new helpers that might be used elsewhere :
sk_to_full_sk() and sk_const_to_full_sk()
Note: We also need to add RCU protection for xfrm lookups,
now TCP/DCCP have lockless listener processing. This will
be addressed in separate patches.
Fixes: ca6fb06518 ("tcp: attach SYNACK messages to request sockets instead of listener")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the dst_entries_init/destroy calls for xfrm4 and xfrm6 dst_ops
templates; their dst_entries counters will never be used. Move the
xfrm dst_ops initialization from the common xfrm/xfrm_policy.c to
xfrm4/xfrm4_policy.c and xfrm6/xfrm6_policy.c, and call dst_entries_init
and dst_entries_destroy for each net namespace.
The ipv4 and ipv6 xfrms each create dst_ops template, and perform
dst_entries_init on the templates. The template values are copied to each
net namespace's xfrm.xfrm*_dst_ops. The problem there is the dst_ops
pcpuc_entries field is a percpu counter and cannot be used correctly by
simply copying it to another object.
The result of this is a very subtle bug; changes to the dst entries
counter from one net namespace may sometimes get applied to a different
net namespace dst entries counter. This is because of how the percpu
counter works; it has a main count field as well as a pointer to the
percpu variables. Each net namespace maintains its own main count
variable, but all point to one set of percpu variables. When any net
namespace happens to change one of the percpu variables to outside its
small batch range, its count is moved to the net namespace's main count
variable. So with multiple net namespaces operating concurrently, the
dst_ops entries counter can stray from the actual value that it should
be; if counts are consistently moved from one net namespace to another
(which my testing showed is likely), then one net namespace winds up
with a negative dst_ops count while another winds up with a continually
increasing count, eventually reaching its gc_thresh limit, which causes
all new traffic on the net namespace to fail with -ENOBUFS.
Signed-off-by: Dan Streetman <dan.streetman@canonical.com>
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2015-10-30
1) The flow cache is limited by the flow cache limit which
depends on the number of cpus and the xfrm garbage collector
threshold which is independent of the number of cpus. This
leads to the fact that on systems with more than 16 cpus
we hit the xfrm garbage collector limit and refuse new
allocations, so new flows are dropped. On systems with 16
or less cpus, we hit the flowcache limit. In this case, we
shrink the flow cache instead of refusing new flows.
We increase the xfrm garbage collector threshold to INT_MAX
to get the same behaviour, independent of the number of cpus.
2) Fix some unaligned accesses on sparc systems.
From Sowmini Varadhan.
3) Fix some header checks in _decode_session4. We may call
pskb_may_pull with a negative value converted to unsigened
int from pskb_may_pull. This can lead to incorrect policy
lookups. We fix this by a check of the data pointer position
before we call pskb_may_pull.
4) Reload skb header pointers after calling pskb_may_pull
in _decode_session4 as this may change the pointers into
the packet.
5) Add a missing statistic counter on inner mode errors.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
net/ipv6/xfrm6_output.c
net/openvswitch/flow_netlink.c
net/openvswitch/vport-gre.c
net/openvswitch/vport-vxlan.c
net/openvswitch/vport.c
net/openvswitch/vport.h
The openvswitch conflicts were overlapping changes. One was
the egress tunnel info fix in 'net' and the other was the
vport ->send() op simplification in 'net-next'.
The xfrm6_output.c conflicts was also a simplification
overlapping a bug fix.
Signed-off-by: David S. Miller <davem@davemloft.net>
Increment the LINUX_MIB_XFRMINSTATEMODEERROR statistic counter
to notify about dropped packets if we fail to fetch a inner mode.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
On sparc, deleting established SAs (e.g., by restarting ipsec)
results in unaligned access messages via xfrm_del_sa ->
km_state_notify -> xfrm_send_state_notify().
Even though struct xfrm_usersa_info is aligned on 8-byte boundaries,
netlink attributes are fundamentally only 4 byte aligned, and this
cannot be changed for nla_data() that is passed up to userspace.
As a result, the put_unaligned() macro needs to be used to
set up potentially unaligned fields such as the xfrm_stats in
copy_to_user_state()
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The network namespace is already passed into dst_output pass it into
dst->output lwt->output and friends.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For consistency with the other similar methods in the kernel pass a
struct sock into the dst_ops .local_out method.
Simplifying the socket passing case is needed a prequel to passing a
struct net reference into .local_out.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace dst_output_okfn with dst_output
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow to change the replay threshold (XFRMA_REPLAY_THRESH) and expiry
timer (XFRMA_ETIMER_THRESH) of a state without having to set other
attributes like replay counter and byte lifetime. Changing these other
values while traffic flows will break the state.
Signed-off-by: Michael Rossberg <michael.rossberg@tu-ilmenau.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Very soon, TCP stack might call inet_csk_route_req(), which
calls inet_csk_route_req() with an unlocked listener socket,
so we need to make sure ip_route_output_flow() is not trying to
change any field from its socket argument.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In code review it was noticed that I had failed to add some blank lines
in places where they are customarily used. Taking a second look at the
code I have to agree blank lines would be nice so I have added them
here.
Reported-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is immediately motivated by the bridge code that chains functions that
call into netfilter. Without passing net into the okfns the bridge code would
need to guess about the best expression for the network namespace to process
packets in.
As net is frequently one of the first things computed in continuation functions
after netfilter has done it's job passing in the desired network namespace is in
many cases a code simplification.
To support this change the function dst_output_okfn is introduced to
simplify passing dst_output as an okfn. For the moment dst_output_okfn
just silently drops the struct net.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass a network namespace parameter into the netfilter hooks. At the
call site of the netfilter hooks the path a packet is taking through
the network stack is well known which allows the network namespace to
be easily and reliabily.
This allows the replacement of magic code like
"dev_net(state->in?:state->out)" that appears at the start of most
netfilter hooks with "state->net".
In almost all cases the network namespace passed in is derived
from the first network device passed in, guaranteeing those
paths will not see any changes in practice.
The exceptions are:
xfrm/xfrm_output.c:xfrm_output_resume() xs_net(skb_dst(skb)->xfrm)
ipvs/ip_vs_xmit.c:ip_vs_nat_send_or_cont() ip_vs_conn_net(cp)
ipvs/ip_vs_xmit.c:ip_vs_send_or_cont() ip_vs_conn_net(cp)
ipv4/raw.c:raw_send_hdrinc() sock_net(sk)
ipv6/ip6_output.c:ip6_xmit() sock_net(sk)
ipv6/ndisc.c:ndisc_send_skb() dev_net(skb->dev) not dev_net(dst->dev)
ipv6/raw.c:raw6_send_hdrinc() sock_net(sk)
br_netfilter_hooks.c:br_nf_pre_routing_finish() dev_net(skb->dev) before skb->dev is set to nf_bridge->physindev
In all cases these exceptions seem to be a better expression for the
network namespace the packet is being processed in then the historic
"dev_net(in?in:out)". I am documenting them in case something odd
pops up and someone starts trying to track down what happened.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a sock paramter to dst_output making dst_output_sk superfluous.
Add a skb->sk parameter to all of the callers of dst_output
Have the callers of dst_output_sk call dst_output.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking updates from David Miller:
"Another merge window, another set of networking changes. I've heard
rumblings that the lightweight tunnels infrastructure has been voted
networking change of the year. But what do I know?
1) Add conntrack support to openvswitch, from Joe Stringer.
2) Initial support for VRF (Virtual Routing and Forwarding), which
allows the segmentation of routing paths without using multiple
devices. There are some semantic kinks to work out still, but
this is a reasonably strong foundation. From David Ahern.
3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.
4) Ignore route nexthops with a link down state in ipv6, just like
ipv4. From Andy Gospodarek.
5) Remove spinlock from fast path of act_gact and act_mirred, from
Eric Dumazet.
6) Document the DSA layer, from Florian Fainelli.
7) Add netconsole support to bcmgenet, systemport, and DSA. Also
from Florian Fainelli.
8) Add Mellanox Switch Driver and core infrastructure, from Jiri
Pirko.
9) Add support for "light weight tunnels", which allow for
encapsulation and decapsulation without bearing the overhead of a
full blown netdevice. From Thomas Graf, Jiri Benc, and a cast of
others.
10) Add Identifier Locator Addressing support for ipv6, from Tom
Herbert.
11) Support fragmented SKBs in iwlwifi, from Johannes Berg.
12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.
13) Add BQL support to 3c59x driver, from Loganaden Velvindron.
14) Stop using a zero TX queue length to mean that a device shouldn't
have a qdisc attached, use an explicit flag instead. From Phil
Sutter.
15) Use generic geneve netdevice infrastructure in openvswitch, from
Pravin B Shelar.
16) Add infrastructure to avoid re-forwarding a packet in software
that was already forwarded by a hardware switch. From Scott
Feldman.
17) Allow AF_PACKET fanout function to be implemented in a bpf
program, from Willem de Bruijn"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
net: fec: clear receive interrupts before processing a packet
ipv6: fix exthdrs offload registration in out_rt path
xen-netback: add support for multicast control
bgmac: Update fixed_phy_register()
sock, diag: fix panic in sock_diag_put_filterinfo
flow_dissector: Use 'const' where possible.
flow_dissector: Fix function argument ordering dependency
ixgbe: Resolve "initialized field overwritten" warnings
ixgbe: Remove bimodal SR-IOV disabling
ixgbe: Add support for reporting 2.5G link speed
ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
ixgbe: support for ethtool set_rxfh
ixgbe: Avoid needless PHY access on copper phys
ixgbe: cleanup to use cached mask value
ixgbe: Remove second instance of lan_id variable
ixgbe: use kzalloc for allocating one thing
flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
ixgbe: Remove unused PCI bus types
...
Now that seqniv is identical with seqiv we no longer need it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Rules can be installed that direct route lookups to specific tables based
on oif. Plumb the oif through the xfrm lookups so it gets set in the flow
struct and passed to the resolver routines.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull networking updates from David Miller:
1) Add TX fast path in mac80211, from Johannes Berg.
2) Add TSO/GRO support to ibmveth, from Thomas Falcon
3) Move away from cached routes in ipv6, just like ipv4, from Martin
KaFai Lau.
4) Lots of new rhashtable tests, from Thomas Graf.
5) Run ingress qdisc lockless, from Alexei Starovoitov.
6) Allow servers to fetch TCP packet headers for SYN packets of new
connections, for fingerprinting. From Eric Dumazet.
7) Add mode parameter to pktgen, for testing receive. From Alexei
Starovoitov.
8) Cache access optimizations via simplifications of build_skb(), from
Alexander Duyck.
9) Move page frag allocator under mm/, also from Alexander.
10) Add xmit_more support to hv_netvsc, from KY Srinivasan.
11) Add a counter guard in case we try to perform endless reclassify
loops in the packet scheduler.
12) Extern flow dissector to be programmable and use it in new "Flower"
classifier. From Jiri Pirko.
13) AF_PACKET fanout rollover fixes, performance improvements, and new
statistics. From Willem de Bruijn.
14) Add netdev driver for GENEVE tunnels, from John W Linville.
15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.
16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.
17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
Borkmann.
18) Add tail call support to BPF, from Alexei Starovoitov.
19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.
20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.
21) Favor even port numbers for allocation to connect() requests, and
odd port numbers for bind(0), in an effort to help avoid
ip_local_port_range exhaustion. From Eric Dumazet.
22) Add Cavium ThunderX driver, from Sunil Goutham.
23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
from Alexei Starovoitov.
24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.
25) Double TCP Small Queues default to 256K to accomodate situations
like the XEN driver and wireless aggregation. From Wei Liu.
26) Add more entropy inputs to flow dissector, from Tom Herbert.
27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
Jonassen.
28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.
29) Track and act upon link status of ipv4 route nexthops, from Andy
Gospodarek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
bridge: vlan: flush the dynamically learned entries on port vlan delete
bridge: multicast: add a comment to br_port_state_selection about blocking state
net: inet_diag: export IPV6_V6ONLY sockopt
stmmac: troubleshoot unexpected bits in des0 & des1
net: ipv4 sysctl option to ignore routes when nexthop link is down
net: track link-status of ipv4 nexthops
net: switchdev: ignore unsupported bridge flags
net: Cavium: Fix MAC address setting in shutdown state
drivers: net: xgene: fix for ACPI support without ACPI
ip: report the original address of ICMP messages
net/mlx5e: Prefetch skb data on RX
net/mlx5e: Pop cq outside mlx5e_get_cqe
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
net/mlx5e: Remove extra spaces
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
...
Pull crypto update from Herbert Xu:
"Here is the crypto update for 4.2:
API:
- Convert RNG interface to new style.
- New AEAD interface with one SG list for AD and plain/cipher text.
All external AEAD users have been converted.
- New asymmetric key interface (akcipher).
Algorithms:
- Chacha20, Poly1305 and RFC7539 support.
- New RSA implementation.
- Jitter RNG.
- DRBG is now seeded with both /dev/random and Jitter RNG. If kernel
pool isn't ready then DRBG will be reseeded when it is.
- DRBG is now the default crypto API RNG, replacing krng.
- 842 compression (previously part of powerpc nx driver).
Drivers:
- Accelerated SHA-512 for arm64.
- New Marvell CESA driver that supports DMA and more algorithms.
- Updated powerpc nx 842 support.
- Added support for SEC1 hardware to talitos"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (292 commits)
crypto: marvell/cesa - remove COMPILE_TEST dependency
crypto: algif_aead - Temporarily disable all AEAD algorithms
crypto: af_alg - Forbid the use internal algorithms
crypto: echainiv - Only hold RNG during initialisation
crypto: seqiv - Add compatibility support without RNG
crypto: eseqiv - Offer normal cipher functionality without RNG
crypto: chainiv - Offer normal cipher functionality without RNG
crypto: user - Add CRYPTO_MSG_DELRNG
crypto: user - Move cryptouser.h to uapi
crypto: rng - Do not free default RNG when it becomes unused
crypto: skcipher - Allow givencrypt to be NULL
crypto: sahara - propagate the error on clk_disable_unprepare() failure
crypto: rsa - fix invalid select for AKCIPHER
crypto: picoxcell - Update to the current clk API
crypto: nx - Check for bogus firmware properties
crypto: marvell/cesa - add DT bindings documentation
crypto: marvell/cesa - add support for Kirkwood and Dove SoCs
crypto: marvell/cesa - add support for Orion SoCs
crypto: marvell/cesa - add allhwsupport module parameter
crypto: marvell/cesa - add support for all armada SoCs
...
Conflicts:
drivers/net/phy/amd-xgbe-phy.c
drivers/net/wireless/iwlwifi/Kconfig
include/net/mac80211.h
iwlwifi/Kconfig and mac80211.h were both trivial overlapping
changes.
The drivers/net/phy/amd-xgbe-phy.c file got removed in 'net-next' and
the bug fix that happened on the 'net' side is already integrated
into the rest of the amd-xgbe driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2015-05-28
1) Remove xfrm_queue_purge as this is the same as skb_queue_purge.
2) Optimize policy and state walk.
3) Use a sane return code if afinfo registration fails.
4) Only check fori a acquire state if the state is not valid.
5) Remove a unnecessary NULL check before xfrm_pol_hold
as it checks the input for NULL.
6) Return directly if the xfrm hold queue is empty, avoid
to take a lock as it is nothing to do in this case.
7) Optimize the inexact policy search and allow for matching
of policies with priority ~0U.
All from Li RongQing.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This change makes it so that if a tunnel is defined we just use the mark
from the tunnel instead of the mark from the skb header. By doing this we
can avoid the need to set skb->mark inside of the tunnel receive functions.
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This patch adds IV generator information to xfrm_state. This
is currently obtained from our own list of algorithm descriptions.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds IV generator information for each AEAD and block
cipher to xfrm_algo_desc. This will be used to access the new
AEAD interface.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As we're now always including the high bits of the sequence number
in the IV generation process we need to ensure that they don't
contain crap.
This patch ensures that the high sequence bits are always zeroed
so that we don't leak random data into the IV.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The policies are organized into list by priority ascent of policy,
so it is unnecessary to continue to loop the policy if the priority
of current looped police is larger than or equal priority which is
from the policy_bydst list.
This allows to match policy with ~0U priority in inexact list too.
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
As xfrm_output_one() is the only caller of skb_dst_pop(), we should
make skb_dst_pop() localized.
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
if hold_queue of old xfrm_policy is NULL, return directly, then not need to
run other codes, especially take the spin lock
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
xfrm_pol_hold will check its input with NULL
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The returned xfrm_state should be hold before unlock xfrm_state_lock,
otherwise the returned xfrm_state maybe be released.
Fixes: c454997e6[{pktgen, xfrm} Introduce xfrm_state_lookup_byspi..]
Cc: Fan Du <fan.du@intel.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Fan Du <fan.du@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Check x->km.state with XFRM_STATE_ACQ only when state is not
XFRM_STAT_VALID, not everytime
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
If xfrm_*_register_afinfo failed since xfrm_*_afinfo[afinfo->family] had the
value, return the -EEXIST, not -ENOBUFS
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The walk from input is the list header, and marked as dead, and will
be skipped in loop.
list_first_entry() can be used to return the true usable value from
walk if walk is not empty
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The task of xfrm_queue_purge is same as skb_queue_purge, so remove it
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The dwmac-socfpga.c conflict was a case of a bug fix overlapping
changes in net-next to handle an error pointer differently.
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2015-04-09
1) Prohibit the use/abuse of the xfrm netlink interface on
32/64 bit compatibility tasks. We need a full compat
layer before we can allow this. From Fan Du.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On the output paths in particular, we have to sometimes deal with two
socket contexts. First, and usually skb->sk, is the local socket that
generated the frame.
And second, is potentially the socket used to control a tunneling
socket, such as one the encapsulates using UDP.
We do not want to disassociate skb->sk when encapsulating in order
to fix this, because that would break socket memory accounting.
The most extreme case where this can cause huge problems is an
AF_PACKET socket transmitting over a vxlan device. We hit code
paths doing checks that assume they are dealing with an ipv4
socket, but are actually operating upon the AF_PACKET one.
Signed-off-by: David S. Miller <davem@davemloft.net>
https://bugzilla.kernel.org/show_bug.cgi?id=95211
Commit 70be6c91c8
("xfrm: Add xfrm_tunnel_skb_cb to the skb common buffer") added check
which dereferences ->outer_mode too early but larval SAs don't have
this pointer set (yet). So check for tunnel stuff later.
Mike Noordermeer reported this bug and patiently applied all the debugging.
Technically this is remote-oops-in-interrupt-context type of thing.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000034
IP: [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0
...
[<ffffffff81500fc6>] ? xfrm4_esp_rcv+0x36/0x70
[<ffffffff814acc9a>] ? ip_local_deliver_finish+0x9a/0x200
[<ffffffff81471b83>] ? __netif_receive_skb_core+0x6f3/0x8f0
...
RIP [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0
Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In many places, the a6 field is typecasted to struct in6_addr. As the
fields are in union anyway, just add in6_addr type to the union and
get rid of the typecasting.
Modifying the uapi header is okay, the union has still the same size.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2015-03-16
1) Fix the network header offset in _decode_session6
when multiple IPv6 extension headers are present.
From Hajime Tazaki.
2) Fix an interfamily tunnel crash. We set outer mode
protocol too early and may dispatch to the wrong
address family. Move the setting of the outer mode
protocol behind the last accessing of the inner mode
to fix the crash.
3) Most callers of xfrm_lookup() expect that dst_orig
is released on error. But xfrm_lookup_route() may
need dst_orig to handle certain error cases. So
introduce a flag that tells what should be done in
case of error. From Huaibin Wang.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
structure like xfrm_usersa_info or xfrm_userpolicy_info
has different sizeof when compiled as 32bits and 64bits
due to not appending pack attribute in their definition.
This will result in broken SA and SP information when user
trying to configure them through netlink interface.
Inform user land about this situation instead of keeping
silent, the upper test scripts would behave accordingly.
Signed-off-by: Fan Du <fan.du@intel.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
dst_orig should be released on error. Function like __xfrm_route_forward()
expects that behavior.
Since a recent commit, xfrm_lookup() may also be called by xfrm_lookup_route(),
which expects the opposite.
Let's introduce a new flag (XFRM_LOOKUP_KEEP_DST_REF) to tell what should be
done in case of error.
Fixes: f92ee61982d("xfrm: Generate blackhole routes only from route lookup functions")
Signed-off-by: huaibin Wang <huaibin.wang@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.
This makes the very common pattern of
if (genlmsg_end(...) < 0) { ... }
be a whole bunch of dead code. Many places also simply do
return nlmsg_end(...);
and the caller is expected to deal with it.
This also commonly (at least for me) causes errors, because it is very
common to write
if (my_function(...))
/* error condition */
and if my_function() does "return nlmsg_end()" this is of course wrong.
Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.
Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did
- return nlmsg_end(...);
+ nlmsg_end(...);
+ return 0;
I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.
One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the function aead_entries() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2014-12-03
1) Fix a set but not used warning. From Fabian Frederick.
2) Currently we make sequence number values available to userspace
only if we use ESN. Make the sequence number values also available
for non ESN states. From Zhi Ding.
3) Remove socket policy hashing. We don't need it because socket
policies are always looked up via a linked list. From Herbert Xu.
4) After removing socket policy hashing, we can use __xfrm_policy_link
in xfrm_policy_insert. From Herbert Xu.
5) Add a lookup method for vti6 tunnels with wildcard endpoints.
I forgot this when I initially implemented vti6.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For a long time we couldn't actually use __xfrm_policy_link in
xfrm_policy_insert because the latter wanted to do hashing at
a specific position.
Now that __xfrm_policy_link no longer does hashing it can now
be safely used in xfrm_policy_insert to kill some duplicate code,
finally reuniting general policies with socket policies.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Back in 2003 when I added policy expiration, I half-heartedly
did a clean-up and renamed xfrm_sk_policy_link/xfrm_sk_policy_unlink
to __xfrm_policy_link/__xfrm_policy_unlink, because the latter
could be reused for all policies. I never actually got around
to using __xfrm_policy_link for non-socket policies.
Later on hashing was added to all xfrm policies, including socket
policies. In fact, we don't need hashing on socket policies at
all since they're always looked up via a linked list.
This patch restores xfrm_sk_policy_link/xfrm_sk_policy_unlink
as wrappers around __xfrm_policy_link/__xfrm_policy_unlink so
that it's obvious we're dealing with socket policies.
This patch also removes hashing from __xfrm_policy_link as for
now it's only used by socket policies which do not need to be
hashed. Ironically this will in fact allow us to use this helper
for non-socket policies which I shall do later.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
After this commit, the attribute XFRMA_REPLAY_VAL is added when no ESN replay
value is defined. Thus sequence number values are always notified to userspace.
Signed-off-by: dingzhi <zhi.ding@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Some drivers are unable to perform TX completions in a bound time.
They instead call skb_orphan()
Problem is skb_fclone_busy() has to detect this case, otherwise
we block TCP retransmits and can freeze unlucky tcp sessions on
mostly idle hosts.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 1f3279ae0c ("tcp: avoid retransmits of TCP packets hanging in host queues")
Signed-off-by: David S. Miller <davem@davemloft.net>
skb_gso_segment has three possible return values:
1. a pointer to the first segmented skb
2. an errno value (IS_ERR())
3. NULL. This can happen when GSO is used for header verification.
However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL
and would oops when NULL is returned.
Note that these call sites should never actually see such a NULL return
value; all callers mask out the GSO bits in the feature argument.
However, there have been issues with some protocol handlers erronously not
respecting the specified feature mask in some cases.
It is preferable to get 'have to turn off hw offloading, else slow' reports
rather than 'kernel crashes'.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lets use a proper structure to clearly document and implement
skb fast clones.
Then, we might experiment more easily alternative layouts.
This patch adds a new skb_fclone_busy() helper, used by tcp and xfrm,
to stop leaking of implementation details.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2014-09-25
1) Remove useless hash_resize_mutex in xfrm_hash_resize().
This mutex is used only there, but xfrm_hash_resize()
can't be called concurrently at all. From Ying Xue.
2) Extend policy hashing to prefixed policies based on
prefix lenght thresholds. From Christophe Gouault.
3) Make the policy hash table thresholds configurable
via netlink. From Christophe Gouault.
4) Remove the maximum authentication length for AH.
This was needed to limit stack usage. We switched
already to allocate space, so no need to keep the
limit. From Herbert Xu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Conflicts:
arch/mips/net/bpf_jit.c
drivers/net/can/flexcan.c
Both the flexcan and MIPS bpf_jit conflicts were cases of simple
overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal