Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue
and wujing. Partners can submit pull requests to this branch, and we
can pick the commits to tk4 pub/lts/0017-kabi easly.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Pull networking fixes from David Miller:
1) Sanity check URB networking device parameters to avoid divide by
zero, from Oliver Neukum.
2) Disable global multicast filter in NCSI, otherwise LLDP and IPV6
don't work properly. Longer term this needs a better fix tho. From
Vijay Khemka.
3) Small fixes to selftests (use ping when ping6 is not present, etc.)
from David Ahern.
4) Bring back rt_uses_gateway member of struct rtable, it's semantics
were not well understood and trying to remove it broke things. From
David Ahern.
5) Move usbnet snaity checking, ignore endpoints with invalid
wMaxPacketSize. From Bjørn Mork.
6) Missing Kconfig deps for sja1105 driver, from Mao Wenan.
7) Various small fixes to the mlx5 DR steering code, from Alaa Hleihel,
Alex Vesker, and Yevgeny Kliteynik
8) Missing CAP_NET_RAW checks in various places, from Ori Nimron.
9) Fix crash when removing sch_cbs entry while offloading is enabled,
from Vinicius Costa Gomes.
10) Signedness bug fixes, generally in looking at the result given by
of_get_phy_mode() and friends. From Dan Crapenter.
11) Disable preemption around BPF_PROG_RUN() calls, from Eric Dumazet.
12) Don't create VRF ipv6 rules if ipv6 is disabled, from David Ahern.
13) Fix quantization code in tcp_bbr, from Kevin Yang.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (127 commits)
net: tap: clean up an indentation issue
nfp: abm: fix memory leak in nfp_abm_u32_knode_replace
tcp: better handle TCP_USER_TIMEOUT in SYN_SENT state
sk_buff: drop all skb extensions on free and skb scrubbing
tcp_bbr: fix quantization code to not raise cwnd if not probing bandwidth
mlxsw: spectrum_flower: Fail in case user specifies multiple mirror actions
Documentation: Clarify trap's description
mlxsw: spectrum: Clear VLAN filters during port initialization
net: ena: clean up indentation issue
NFC: st95hf: clean up indentation issue
net: phy: micrel: add Asym Pause workaround for KSZ9021
net: socionext: ave: Avoid using netdev_err() before calling register_netdev()
ptp: correctly disable flags on old ioctls
lib: dimlib: fix help text typos
net: dsa: microchip: Always set regmap stride to 1
nfp: flower: fix memory leak in nfp_flower_spawn_vnic_reprs
nfp: flower: prevent memory leak in nfp_flower_spawn_phy_reprs
net/sched: Set default of CONFIG_NET_TC_SKB_EXT to N
vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
net: sched: sch_sfb: don't call qdisc_put() while holding tree lock
...
Pull kernel lockdown mode from James Morris:
"This is the latest iteration of the kernel lockdown patchset, from
Matthew Garrett, David Howells and others.
From the original description:
This patchset introduces an optional kernel lockdown feature,
intended to strengthen the boundary between UID 0 and the kernel.
When enabled, various pieces of kernel functionality are restricted.
Applications that rely on low-level access to either hardware or the
kernel may cease working as a result - therefore this should not be
enabled without appropriate evaluation beforehand.
The majority of mainstream distributions have been carrying variants
of this patchset for many years now, so there's value in providing a
doesn't meet every distribution requirement, but gets us much closer
to not requiring external patches.
There are two major changes since this was last proposed for mainline:
- Separating lockdown from EFI secure boot. Background discussion is
covered here: https://lwn.net/Articles/751061/
- Implementation as an LSM, with a default stackable lockdown LSM
module. This allows the lockdown feature to be policy-driven,
rather than encoding an implicit policy within the mechanism.
The new locked_down LSM hook is provided to allow LSMs to make a
policy decision around whether kernel functionality that would allow
tampering with or examining the runtime state of the kernel should be
permitted.
The included lockdown LSM provides an implementation with a simple
policy intended for general purpose use. This policy provides a coarse
level of granularity, controllable via the kernel command line:
lockdown={integrity|confidentiality}
Enable the kernel lockdown feature. If set to integrity, kernel features
that allow userland to modify the running kernel are disabled. If set to
confidentiality, kernel features that allow userland to extract
confidential information from the kernel are also disabled.
This may also be controlled via /sys/kernel/security/lockdown and
overriden by kernel configuration.
New or existing LSMs may implement finer-grained controls of the
lockdown features. Refer to the lockdown_reason documentation in
include/linux/security.h for details.
The lockdown feature has had signficant design feedback and review
across many subsystems. This code has been in linux-next for some
weeks, with a few fixes applied along the way.
Stephen Rothwell noted that commit 9d1f8be5cf ("bpf: Restrict bpf
when kernel lockdown is in confidentiality mode") is missing a
Signed-off-by from its author. Matthew responded that he is providing
this under category (c) of the DCO"
* 'next-lockdown' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (31 commits)
kexec: Fix file verification on S390
security: constify some arrays in lockdown LSM
lockdown: Print current->comm in restriction messages
efi: Restrict efivar_ssdt_load when the kernel is locked down
tracefs: Restrict tracefs when the kernel is locked down
debugfs: Restrict debugfs when the kernel is locked down
kexec: Allow kexec_file() with appropriate IMA policy when locked down
lockdown: Lock down perf when in confidentiality mode
bpf: Restrict bpf when kernel lockdown is in confidentiality mode
lockdown: Lock down tracing and perf kprobes when in confidentiality mode
lockdown: Lock down /proc/kcore
x86/mmiotrace: Lock down the testmmiotrace module
lockdown: Lock down module params that specify hardware parameters (eg. ioport)
lockdown: Lock down TIOCSSERIAL
lockdown: Prohibit PCMCIA CIS storage when the kernel is locked down
acpi: Disable ACPI table override if the kernel is locked down
acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down
ACPI: Limit access to custom_method when the kernel is locked down
x86/msr: Restrict MSR access when the kernel is locked down
x86: Lock down IO port access when the kernel is locked down
...
bpf_read() and bpf_read_str() could potentially be abused to (eg) allow
private keys in kernel memory to be leaked. Disable them if the kernel
has been locked down in confidentiality mode.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
cc: netdev@vger.kernel.org
cc: Chun-Yi Lee <jlee@suse.com>
cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: James Morris <jmorris@namei.org>
With CONFIG_MODULES=n, the following compiler warning occurs:
/data/users/yhs/work/net-next/kernel/trace/bpf_trace.c:605:13: warning:
‘do_bpf_send_signal’ defined but not used [-Wunused-function]
static void do_bpf_send_signal(struct irq_work *entry)
The __init function send_signal_irq_work_init(), which calls
do_bpf_send_signal(), is defined under CONFIG_MODULES. Hence,
when CONFIG_MODULES=n, nobody calls static function do_bpf_send_signal(),
hence the warning.
The init function send_signal_irq_work_init() should work without
CONFIG_MODULES. Moving it out of CONFIG_MODULES
code section fixed the compiler warning, and also make bpf_send_signal()
helper work without CONFIG_MODULES.
Fixes: 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
Reported-By: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BPF_PROG_TYPE_RAW_TRACEPOINTs can be executed nested on the same CPU, as
they do not increment bpf_prog_active while executing.
This enables three levels of nesting, to support
- a kprobe or raw tp or perf event,
- another one of the above that irq context happens to call, and
- another one in nmi context
(at most one of which may be a kprobe or perf event).
Fixes: 20b9d7ac48 ("bpf: avoid excessive stack usage for perf_sample_data")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that we don't have __rcu markers on the bpf_prog_array helpers,
let's use proper rcu_dereference_protected to obtain array pointer
under mutex.
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 8b401f9ed2 ("bpf: implement bpf_send_signal() helper")
introduced bpf_send_signal() helper. If the context is nmi,
the sending signal work needs to be deferred to irq_work.
If the signal is invalid, the error will appear in irq_work
and it won't be propagated to user.
This patch did an early check in the helper itself to notify
user invalid signal, as suggested by Daniel.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch tries to solve the following specific use case.
Currently, bpf program can already collect stack traces
through kernel function get_perf_callchain()
when certain events happens (e.g., cache miss counter or
cpu clock counter overflows). But such stack traces are
not enough for jitted programs, e.g., hhvm (jited php).
To get real stack trace, jit engine internal data structures
need to be traversed in order to get the real user functions.
bpf program itself may not be the best place to traverse
the jit engine as the traversing logic could be complex and
it is not a stable interface either.
Instead, hhvm implements a signal handler,
e.g. for SIGALARM, and a set of program locations which
it can dump stack traces. When it receives a signal, it will
dump the stack in next such program location.
Such a mechanism can be implemented in the following way:
. a perf ring buffer is created between bpf program
and tracing app.
. once a particular event happens, bpf program writes
to the ring buffer and the tracing app gets notified.
. the tracing app sends a signal SIGALARM to the hhvm.
But this method could have large delays and causing profiling
results skewed.
This patch implements bpf_send_signal() helper to send
a signal to hhvm in real time, resulting in intended stack traces.
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Both of them are not declared in the headers and not used outside
of bpf_trace.c file.
Fixes: a38d1107f9 ("bpf: support raw tracepoints in modules")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull networking updates from David Miller:
"Highlights:
1) Support AES128-CCM ciphers in kTLS, from Vakul Garg.
2) Add fib_sync_mem to control the amount of dirty memory we allow to
queue up between synchronize RCU calls, from David Ahern.
3) Make flow classifier more lockless, from Vlad Buslov.
4) Add PHY downshift support to aquantia driver, from Heiner
Kallweit.
5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces
contention on SLAB spinlocks in heavy RPC workloads.
6) Partial GSO offload support in XFRM, from Boris Pismenny.
7) Add fast link down support to ethtool, from Heiner Kallweit.
8) Use siphash for IP ID generator, from Eric Dumazet.
9) Pull nexthops even further out from ipv4/ipv6 routes and FIB
entries, from David Ahern.
10) Move skb->xmit_more into a per-cpu variable, from Florian
Westphal.
11) Improve eBPF verifier speed and increase maximum program size,
from Alexei Starovoitov.
12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit
spinlocks. From Neil Brown.
13) Allow tunneling with GUE encap in ipvs, from Jacky Hu.
14) Improve link partner cap detection in generic PHY code, from
Heiner Kallweit.
15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan
Maguire.
16) Remove SKB list implementation assumptions in SCTP, your's truly.
17) Various cleanups, optimizations, and simplifications in r8169
driver. From Heiner Kallweit.
18) Add memory accounting on TX and RX path of SCTP, from Xin Long.
19) Switch PHY drivers over to use dynamic featue detection, from
Heiner Kallweit.
20) Support flow steering without masking in dpaa2-eth, from Ioana
Ciocoi.
21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri
Pirko.
22) Increase the strict parsing of current and future netlink
attributes, also export such policies to userspace. From Johannes
Berg.
23) Allow DSA tag drivers to be modular, from Andrew Lunn.
24) Remove legacy DSA probing support, also from Andrew Lunn.
25) Allow ll_temac driver to be used on non-x86 platforms, from Esben
Haabendal.
26) Add a generic tracepoint for TX queue timeouts to ease debugging,
from Cong Wang.
27) More indirect call optimizations, from Paolo Abeni"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits)
cxgb4: Fix error path in cxgb4_init_module
net: phy: improve pause mode reporting in phy_print_status
dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings
net: macb: Change interrupt and napi enable order in open
net: ll_temac: Improve error message on error IRQ
net/sched: remove block pointer from common offload structure
net: ethernet: support of_get_mac_address new ERR_PTR error
net: usb: smsc: fix warning reported by kbuild test robot
staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check
net: dsa: support of_get_mac_address new ERR_PTR error
net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats
vrf: sit mtu should not be updated when vrf netdev is the link
net: dsa: Fix error cleanup path in dsa_init_module
l2tp: Fix possible NULL pointer dereference
taprio: add null check on sched_nest to avoid potential null pointer dereference
net: mvpp2: cls: fix less than zero check on a u32 variable
net_sched: sch_fq: handle non connected flows
net_sched: sch_fq: do not assume EDT packets are ordered
net: hns3: use devm_kcalloc when allocating desc_cb
net: hns3: some cleanup for struct hns3_enet_ring
...
When using a temporary mm, bpf_probe_write_user() should not be able to
write to user memory, since user memory addresses may be used to map
kernel memory. Detect these cases and fail bpf_probe_write_user() in
such cases.
Suggested-by: Jann Horn <jannh@google.com>
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <akpm@linux-foundation.org>
Cc: <ard.biesheuvel@linaro.org>
Cc: <deneen.t.dock@intel.com>
Cc: <kernel-hardening@lists.openwall.com>
Cc: <kristen@linux.intel.com>
Cc: <linux_dti@icloud.com>
Cc: <will.deacon@arm.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190426001143.4983-24-namit@vmware.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This is an opt-in interface that allows a tracepoint to provide a safe
buffer that can be written from a BPF_PROG_TYPE_RAW_TRACEPOINT program.
The size of the buffer must be a compile-time constant, and is checked
before allowing a BPF program to attach to a tracepoint that uses this
feature.
The pointer to this buffer will be the first argument of tracepoints
that opt in; the pointer is valid and can be bpf_probe_read() by both
BPF_PROG_TYPE_RAW_TRACEPOINT and BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE
programs that attach to such a tracepoint, but the buffer to which it
points may only be written by the latter.
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
commit f1a2e44a3a ("bpf: add queue and stack maps") introduced new BPF
helper functions:
- BPF_FUNC_map_push_elem
- BPF_FUNC_map_pop_elem
- BPF_FUNC_map_peek_elem
but they were made available only for network BPF programs. This patch
makes them available for tracepoint, cgroup and lirc programs.
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Cc: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For the original mode of operation it isn't needed, since we report back
errors via PERF_RECORD_LOST records in the ring buffer, but for use in
bpf_perf_event_output() it is convenient to return the errors, basically
-ENOSPC.
Currently bpf_perf_event_output() returns an error indication, the last
thing it does, which is to push it to the ring buffer is that can fail
and if so, this failure won't be reported back to its users, fix it.
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20190118150938.GN5823@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Distributions build drivers as modules, including network and filesystem
drivers which export numerous tracepoints. This enables
bpf(BPF_RAW_TRACEPOINT_OPEN) to attach to those tracepoints.
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A format string consisting of "%p" or "%s" followed by an invalid
specifier (e.g. "%p%\n" or "%s%") could pass the check which
would make format_decode (lib/vsprintf.c) to warn.
Fixes: 9c959c863f ("tracing: Allow BPF programs to call bpf_trace_printk()")
Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit bf6fa2c893 ("bpf: implement bpf_get_current_cgroup_id()
helper") introduced a new helper bpf_get_current_cgroup_id().
The helper has a dependency on CONFIG_CGROUPS.
When CONFIG_CGROUPS is not defined, using the helper will result
the following verifier error:
kernel subsystem misconfigured func bpf_get_current_cgroup_id#80
which is hard for users to interpret.
Guarding the reference to bpf_get_current_cgroup_id_proto with
CONFIG_CGROUPS will result in below better message:
unknown func bpf_get_current_cgroup_id#80
Fixes: bf6fa2c893 ("bpf: implement bpf_get_current_cgroup_id() helper")
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf has been used extensively for tracing. For example, bcc
contains an almost full set of bpf-based tools to trace kernel
and user functions/events. Most tracing tools are currently
either filtered based on pid or system-wide.
Containers have been used quite extensively in industry and
cgroup is often used together to provide resource isolation
and protection. Several processes may run inside the same
container. It is often desirable to get container-level tracing
results as well, e.g. syscall count, function count, I/O
activity, etc.
This patch implements a new helper, bpf_get_current_cgroup_id(),
which will return cgroup id based on the cgroup within which
the current task is running.
The later patch will provide an example to show that
userspace can get the same cgroup id so it could
configure a filter or policy in the bpf program based on
task cgroup id.
The helper is currently implemented for tracing. It can
be added to other program types as well when needed.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wang reported that all the testcases for BPF_PROG_TYPE_PERF_EVENT
program type in test_verifier report the following errors on x86_32:
172/p unpriv: spill/fill of different pointers ldx FAIL
Unexpected error message!
0: (bf) r6 = r10
1: (07) r6 += -8
2: (15) if r1 == 0x0 goto pc+3
R1=ctx(id=0,off=0,imm=0) R6=fp-8,call_-1 R10=fp0,call_-1
3: (bf) r2 = r10
4: (07) r2 += -76
5: (7b) *(u64 *)(r6 +0) = r2
6: (55) if r1 != 0x0 goto pc+1
R1=ctx(id=0,off=0,imm=0) R2=fp-76,call_-1 R6=fp-8,call_-1 R10=fp0,call_-1 fp-8=fp
7: (7b) *(u64 *)(r6 +0) = r1
8: (79) r1 = *(u64 *)(r6 +0)
9: (79) r1 = *(u64 *)(r1 +68)
invalid bpf_context access off=68 size=8
378/p check bpf_perf_event_data->sample_period byte load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (71) r0 = *(u8 *)(r1 +68)
invalid bpf_context access off=68 size=1
379/p check bpf_perf_event_data->sample_period half load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (69) r0 = *(u16 *)(r1 +68)
invalid bpf_context access off=68 size=2
380/p check bpf_perf_event_data->sample_period word load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (61) r0 = *(u32 *)(r1 +68)
invalid bpf_context access off=68 size=4
381/p check bpf_perf_event_data->sample_period dword load permitted FAIL
Failed to load prog 'Permission denied'!
0: (b7) r0 = 0
1: (79) r0 = *(u64 *)(r1 +68)
invalid bpf_context access off=68 size=8
Reason is that struct pt_regs on x86_32 doesn't fully align to 8 byte
boundary due to its size of 68 bytes. Therefore, bpf_ctx_narrow_access_ok()
will then bail out saying that off & (size_default - 1) which is 68 & 7
doesn't cleanly align in the case of sample_period access from struct
bpf_perf_event_data, hence verifier wrongly thinks we might be doing an
unaligned access here though underlying arch can handle it just fine.
Therefore adjust this down to machine size and check and rewrite the
offset for narrow access on that basis. We also need to fix corresponding
pe_prog_is_valid_access(), since we hit the check for off % size != 0
(e.g. 68 % 8 -> 4) in the first and last test. With that in place, progs
for tracing work on x86_32.
Reported-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This makes is it possible for bpf prog detach to return -ENOENT.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, suppose a userspace application has loaded a bpf program
and attached it to a tracepoint/kprobe/uprobe, and a bpf
introspection tool, e.g., bpftool, wants to show which bpf program
is attached to which tracepoint/kprobe/uprobe. Such attachment
information will be really useful to understand the overall bpf
deployment in the system.
There is a name field (16 bytes) for each program, which could
be used to encode the attachment point. There are some drawbacks
for this approaches. First, bpftool user (e.g., an admin) may not
really understand the association between the name and the
attachment point. Second, if one program is attached to multiple
places, encoding a proper name which can imply all these
attachments becomes difficult.
This patch introduces a new bpf subcommand BPF_TASK_FD_QUERY.
Given a pid and fd, if the <pid, fd> is associated with a
tracepoint/kprobe/uprobe perf event, BPF_TASK_FD_QUERY will return
. prog_id
. tracepoint name, or
. k[ret]probe funcname + offset or kernel addr, or
. u[ret]probe filename + offset
to the userspace.
The user can use "bpftool prog" to find more information about
bpf program itself with prog_id.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the bpf_current_task_under_cgroup helper has a check where if
the BPF program is running in_interrupt(), it will return -EINVAL. This
prevents the helper to be used in many useful scenarios, particularly
BPF programs attached to Perf Events.
This commit removes the check. Tested a few NMI (Perf Event) and some
softirq context, the helper returns the correct result.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, stackmap and bpf_get_stackid helper are provided
for bpf program to get the stack trace. This approach has
a limitation though. If two stack traces have the same hash,
only one will get stored in the stackmap table,
so some stack traces are missing from user perspective.
This patch implements a new helper, bpf_get_stack, will
send stack traces directly to bpf program. The bpf program
is able to see all stack traces, and then can do in-kernel
processing or send stack traces to user space through
shared map or bpf_perf_event_output.
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzbot reported a possible deadlock in perf_event_detach_bpf_prog.
The error details:
======================================================
WARNING: possible circular locking dependency detected
4.16.0-rc7+ #3 Not tainted
------------------------------------------------------
syz-executor7/24531 is trying to acquire lock:
(bpf_event_mutex){+.+.}, at: [<000000008a849b07>] perf_event_detach_bpf_prog+0x92/0x3d0 kernel/trace/bpf_trace.c:854
but task is already holding lock:
(&mm->mmap_sem){++++}, at: [<0000000038768f87>] vm_mmap_pgoff+0x198/0x280 mm/util.c:353
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&mm->mmap_sem){++++}:
__might_fault+0x13a/0x1d0 mm/memory.c:4571
_copy_to_user+0x2c/0xc0 lib/usercopy.c:25
copy_to_user include/linux/uaccess.h:155 [inline]
bpf_prog_array_copy_info+0xf2/0x1c0 kernel/bpf/core.c:1694
perf_event_query_prog_array+0x1c7/0x2c0 kernel/trace/bpf_trace.c:891
_perf_ioctl kernel/events/core.c:4750 [inline]
perf_ioctl+0x3e1/0x1480 kernel/events/core.c:4770
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:686
SYSC_ioctl fs/ioctl.c:701 [inline]
SyS_ioctl+0x8f/0xc0 fs/ioctl.c:692
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> #0 (bpf_event_mutex){+.+.}:
lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:3920
__mutex_lock_common kernel/locking/mutex.c:756 [inline]
__mutex_lock+0x16f/0x1a80 kernel/locking/mutex.c:893
mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:908
perf_event_detach_bpf_prog+0x92/0x3d0 kernel/trace/bpf_trace.c:854
perf_event_free_bpf_prog kernel/events/core.c:8147 [inline]
_free_event+0xbdb/0x10f0 kernel/events/core.c:4116
put_event+0x24/0x30 kernel/events/core.c:4204
perf_mmap_close+0x60d/0x1010 kernel/events/core.c:5172
remove_vma+0xb4/0x1b0 mm/mmap.c:172
remove_vma_list mm/mmap.c:2490 [inline]
do_munmap+0x82a/0xdf0 mm/mmap.c:2731
mmap_region+0x59e/0x15a0 mm/mmap.c:1646
do_mmap+0x6c0/0xe00 mm/mmap.c:1483
do_mmap_pgoff include/linux/mm.h:2223 [inline]
vm_mmap_pgoff+0x1de/0x280 mm/util.c:355
SYSC_mmap_pgoff mm/mmap.c:1533 [inline]
SyS_mmap_pgoff+0x462/0x5f0 mm/mmap.c:1491
SYSC_mmap arch/x86/kernel/sys_x86_64.c:100 [inline]
SyS_mmap+0x16/0x20 arch/x86/kernel/sys_x86_64.c:91
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&mm->mmap_sem);
lock(bpf_event_mutex);
lock(&mm->mmap_sem);
lock(bpf_event_mutex);
*** DEADLOCK ***
======================================================
The bug is introduced by Commit f371b304f1 ("bpf/tracing: allow
user space to query prog array on the same tp") where copy_to_user,
which requires mm->mmap_sem, is called inside bpf_event_mutex lock.
At the same time, during perf_event file descriptor close,
mm->mmap_sem is held first and then subsequent
perf_event_detach_bpf_prog needs bpf_event_mutex lock.
Such a senario caused a deadlock.
As suggested by Daniel, moving copy_to_user out of the
bpf_event_mutex lock should fix the problem.
Fixes: f371b304f1 ("bpf/tracing: allow user space to query prog array on the same tp")
Reported-by: syzbot+dc5ca0e4c9bfafaf2bae@syzkaller.appspotmail.com
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
== The problem ==
There are use-cases when a program of some type can be attached to
multiple attach points and those attach points must have different
permissions to access context or to call helpers.
E.g. context structure may have fields for both IPv4 and IPv6 but it
doesn't make sense to read from / write to IPv6 field when attach point
is somewhere in IPv4 stack.
Same applies to BPF-helpers: it may make sense to call some helper from
some attach point, but not from other for same prog type.
== The solution ==
Introduce `expected_attach_type` field in in `struct bpf_attr` for
`BPF_PROG_LOAD` command. If scenario described in "The problem" section
is the case for some prog type, the field will be checked twice:
1) At load time prog type is checked to see if attach type for it must
be known to validate program permissions correctly. Prog will be
rejected with EINVAL if it's the case and `expected_attach_type` is
not specified or has invalid value.
2) At attach time `attach_type` is compared with `expected_attach_type`,
if prog type requires to have one, and, if they differ, attach will
be rejected with EINVAL.
The `expected_attach_type` is now available as part of `struct bpf_prog`
in both `bpf_verifier_ops->is_valid_access()` and
`bpf_verifier_ops->get_func_proto()` () and can be used to check context
accesses and calls to helpers correspondingly.
Initially the idea was discussed by Alexei Starovoitov <ast@fb.com> and
Daniel Borkmann <daniel@iogearbox.net> here:
https://marc.info/?l=linux-netdev&m=152107378717201&w=2
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Introduce BPF_PROG_TYPE_RAW_TRACEPOINT bpf program type to access
kernel internal arguments of the tracepoints in their raw form.
>From bpf program point of view the access to the arguments look like:
struct bpf_raw_tracepoint_args {
__u64 args[0];
};
int bpf_prog(struct bpf_raw_tracepoint_args *ctx)
{
// program can read args[N] where N depends on tracepoint
// and statically verified at program load+attach time
}
kprobe+bpf infrastructure allows programs access function arguments.
This feature allows programs access raw tracepoint arguments.
Similar to proposed 'dynamic ftrace events' there are no abi guarantees
to what the tracepoints arguments are and what their meaning is.
The program needs to type cast args properly and use bpf_probe_read()
helper to access struct fields when argument is a pointer.
For every tracepoint __bpf_trace_##call function is prepared.
In assembler it looks like:
(gdb) disassemble __bpf_trace_xdp_exception
Dump of assembler code for function __bpf_trace_xdp_exception:
0xffffffff81132080 <+0>: mov %ecx,%ecx
0xffffffff81132082 <+2>: jmpq 0xffffffff811231f0 <bpf_trace_run3>
where
TRACE_EVENT(xdp_exception,
TP_PROTO(const struct net_device *dev,
const struct bpf_prog *xdp, u32 act),
The above assembler snippet is casting 32-bit 'act' field into 'u64'
to pass into bpf_trace_run3(), while 'dev' and 'xdp' args are passed as-is.
All of ~500 of __bpf_trace_*() functions are only 5-10 byte long
and in total this approach adds 7k bytes to .text.
This approach gives the lowest possible overhead
while calling trace_xdp_exception() from kernel C code and
transitioning into bpf land.
Since tracepoint+bpf are used at speeds of 1M+ events per second
this is valuable optimization.
The new BPF_RAW_TRACEPOINT_OPEN sys_bpf command is introduced
that returns anon_inode FD of 'bpf-raw-tracepoint' object.
The user space looks like:
// load bpf prog with BPF_PROG_TYPE_RAW_TRACEPOINT type
prog_fd = bpf_prog_load(...);
// receive anon_inode fd for given bpf_raw_tracepoint with prog attached
raw_tp_fd = bpf_raw_tracepoint_open("xdp_exception", prog_fd);
Ctrl-C of tracing daemon or cmdline tool that uses this feature
will automatically detach bpf program, unload it and
unregister tracepoint probe.
On the kernel side the __bpf_raw_tp_map section of pointers to
tracepoint definition and to __bpf_trace_*() probe function is used
to find a tracepoint with "xdp_exception" name and
corresponding __bpf_trace_xdp_exception() probe function
which are passed to tracepoint_probe_register() to connect probe
with tracepoint.
Addition of bpf_raw_tracepoint doesn't interfere with ftrace and perf
tracepoint mechanisms. perf_event_open() can be used in parallel
on the same tracepoint.
Multiple bpf_raw_tracepoint_open("xdp_exception", prog_fd) are permitted.
Each with its own bpf program. The kernel will execute
all tracepoint probes and all attached bpf programs.
In the future bpf_raw_tracepoints can be extended with
query/introspection logic.
__bpf_raw_tp_map section logic was contributed by Steven Rostedt
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fun set of conflict resolutions here...
For the mac80211 stuff, these were fortunately just parallel
adds. Trivially resolved.
In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.
In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.
The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.
The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:
====================
Due to bug fixes found by the syzkaller bot and taken into the for-rc
branch after development for the 4.17 merge window had already started
being taken into the for-next branch, there were fairly non-trivial
merge issues that would need to be resolved between the for-rc branch
and the for-next branch. This merge resolves those conflicts and
provides a unified base upon which ongoing development for 4.17 can
be based.
Conflicts:
drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f95
(IB/mlx5: Fix cleanup order on unload) added to for-rc and
commit b5ca15ad7e (IB/mlx5: Add proper representors support)
add as part of the devel cycle both needed to modify the
init/de-init functions used by mlx5. To support the new
representors, the new functions added by the cleanup patch
needed to be made non-static, and the init/de-init list
added by the representors patch needed to be modified to
match the init/de-init list changes made by the cleanup
patch.
Updates:
drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
prototypes added by representors patch to reflect new function
names as changed by cleanup patch
drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
stage list to match new order from cleanup patch
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 4bebdc7a85 ("bpf: add helper bpf_perf_prog_read_value")
added helper bpf_perf_prog_read_value so that perf_event type program
can read event counter and enabled/running time.
This commit, however, introduced a bug which allows this helper
for tracepoint type programs. This is incorrect as bpf_perf_prog_read_value
needs to access perf_event through its bpf_perf_event_data_kern type context,
which is not available for tracepoint type program.
This patch fixed the issue by separating bpf_func_proto between tracepoint
and perf_event type programs and removed bpf_perf_prog_read_value
from tracepoint func prototype.
Fixes: 4bebdc7a85 ("bpf: add helper bpf_perf_prog_read_value")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit adds new field "addr" to bpf_perf_event_data which could be
read and used by bpf programs attached to perf events. The value of the
field is copied from bpf_perf_event_data_kern.addr and contains the
address value recorded by specifying sample_type with PERF_SAMPLE_ADDR
when calling perf_event_open.
Signed-off-by: Teng Qin <qinteng@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
syzkaller tried to perform a prog query in perf_event_query_prog_array()
where struct perf_event_query_bpf had an ids_len of 1,073,741,353 and
thus causing a warning due to failed kcalloc() allocation out of the
bpf_prog_array_copy_to_user() helper. Given we cannot attach more than
64 programs to a perf event, there's no point in allowing huge ids_len.
Therefore, allow a buffer that would fix the maximum number of ids and
also add a __GFP_NOWARN to the temporary ids buffer.
Fixes: f371b304f1 ("bpf/tracing: allow user space to query prog array on the same tp")
Fixes: 0911287ce3 ("bpf: fix bpf_prog_array_copy_to_user() issues")
Reported-by: syzbot+cab5816b0edbabf598b3@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, for bpf_trace_printk helper, fake ip address 0x1
is used with comments saying that fake ip will not be printed.
This is indeed true for 4.12 and earlier version, but for
4.13 and later version, the ip address will be printed if
it cannot be resolved with kallsym. Running samples/bpf/tracex5
program and you will have the following in the debugfs
trace_pipe output:
...
<...>-1819 [003] .... 443.497877: 0x00000001: mmap
<...>-1819 [003] .... 443.498289: 0x00000001: syscall=102 (one of get/set uid/pid/gid)
...
The kernel commit changed this behavior is:
commit feaf1283d1
Author: Steven Rostedt (VMware) <rostedt@goodmis.org>
Date: Thu Jun 22 17:04:55 2017 -0400
tracing: Show address when function names are not found
...
This patch changed the comment and also altered the fake ip
address to 0x0 as users may think 0x1 has some special meaning
while it doesn't. The new output:
...
<...>-1799 [002] .... 25.953576: 0: mmap
<...>-1799 [002] .... 25.953865: 0: read(fd=0, buf=00000000053936b5, size=512)
...
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Since error-injection framework is not limited to be used
by kprobes, nor bpf. Other kernel subsystems can use it
freely for checking safeness of error-injection, e.g.
livepatch, ftrace etc.
So this separate error-injection framework from kprobes.
Some differences has been made:
- "kprobe" word is removed from any APIs/structures.
- BPF_ALLOW_ERROR_INJECTION() is renamed to
ALLOW_ERROR_INJECTION() since it is not limited for BPF too.
- CONFIG_FUNCTION_ERROR_INJECTION is the config item of this
feature. It is automatically enabled if the arch supports
error injection feature for kprobe or ftrace etc.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compare instruction pointer with original one on the
stack instead using per-cpu bpf_kprobe_override flag.
This patch also consolidates reset_current_kprobe() and
preempt_enable_no_resched() blocks. Those can be done
in one place.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Check whether error injectable event is on function entry or not.
Currently it checks the event is ftrace-based kprobes or not,
but that is wrong. It should check if the event is on the entry
of target function. Since error injection will override a function
to just return with modified return value, that operation must
be done before the target function starts making stackframe.
As a side effect, bpf error injection is no need to depend on
function-tracer. It can work with sw-breakpoint based kprobe
events too.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2017-12-18
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow arbitrary function calls from one BPF function to another BPF function.
As of today when writing BPF programs, __always_inline had to be used in
the BPF C programs for all functions, unnecessarily causing LLVM to inflate
code size. Handle this more naturally with support for BPF to BPF calls
such that this __always_inline restriction can be overcome. As a result,
it allows for better optimized code and finally enables to introduce core
BPF libraries in the future that can be reused out of different projects.
x86 and arm64 JIT support was added as well, from Alexei.
2) Add infrastructure for tagging functions as error injectable and allow for
BPF to return arbitrary error values when BPF is attached via kprobes on
those. This way of injecting errors generically eases testing and debugging
without having to recompile or restart the kernel. Tags for opting-in for
this facility are added with BPF_ALLOW_ERROR_INJECTION(), from Josef.
3) For BPF offload via nfp JIT, add support for bpf_xdp_adjust_head() helper
call for XDP programs. First part of this work adds handling of BPF
capabilities included in the firmware, and the later patches add support
to the nfp verifier part and JIT as well as some small optimizations,
from Jakub.
4) The bpftool now also gets support for basic cgroup BPF operations such
as attaching, detaching and listing current BPF programs. As a requirement
for the attach part, bpftool can now also load object files through
'bpftool prog load'. This reuses libbpf which we have in the kernel tree
as well. bpftool-cgroup man page is added along with it, from Roman.
5) Back then commit e87c6bc385 ("bpf: permit multiple bpf attachments for
a single perf event") added support for attaching multiple BPF programs
to a single perf event. Given they are configured through perf's ioctl()
interface, the interface has been extended with a PERF_EVENT_IOC_QUERY_BPF
command in this work in order to return an array of one or multiple BPF
prog ids that are currently attached, from Yonghong.
6) Various minor fixes and cleanups to the bpftool's Makefile as well
as a new 'uninstall' and 'doc-uninstall' target for removing bpftool
itself or prior installed documentation related to it, from Quentin.
7) Add CONFIG_CGROUP_BPF=y to the BPF kernel selftest config file which is
required for the test_dev_cgroup test case to run, from Naresh.
8) Fix reporting of XDP prog_flags for nfp driver, from Jakub.
9) Fix libbpf's exit code from the Makefile when libelf was not found in
the system, also from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f371b304f1 ("bpf/tracing: allow user space to
query prog array on the same tp") introduced a perf
ioctl command to query prog array attached to the
same perf tracepoint. The commit introduced a
compilation error under certain config conditions, e.g.,
(1). CONFIG_BPF_SYSCALL is not defined, or
(2). CONFIG_TRACING is defined but neither CONFIG_UPROBE_EVENTS
nor CONFIG_KPROBE_EVENTS is defined.
Error message:
kernel/events/core.o: In function `perf_ioctl':
core.c:(.text+0x98c4): undefined reference to `bpf_event_query_prog_array'
This patch fixed this error by guarding the real definition under
CONFIG_BPF_EVENTS and provided static inline dummy function
if CONFIG_BPF_EVENTS was not defined.
It renamed the function from bpf_event_query_prog_array to
perf_event_query_prog_array and moved the definition from linux/bpf.h
to linux/trace_events.h so the definition is in proximity to
other prog_array related functions.
Fixes: f371b304f1 ("bpf/tracing: allow user space to query prog array on the same tp")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When tracing and networking programs are both attached in the
system and both use event-output helpers that eventually call
into perf_event_output(), then we could end up in a situation
where the tracing attached program runs in user context while
a cls_bpf program is triggered on that same CPU out of softirq
context.
Since both rely on the same per-cpu perf_sample_data, we could
potentially corrupt it. This can only ever happen in a combination
of the two types; all tracing programs use a bpf_prog_active
counter to bail out in case a program is already running on
that CPU out of a different context. XDP and cls_bpf programs
by themselves don't have this issue as they run in the same
context only. Therefore, split both perf_sample_data so they
cannot be accessed from each other.
Fixes: 20b9d7ac48 ("bpf: avoid excessive stack usage for perf_sample_data")
Reported-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Song Liu <songliubraving@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Error injection is sloppy and very ad-hoc. BPF could fill this niche
perfectly with it's kprobe functionality. We could make sure errors are
only triggered in specific call chains that we care about with very
specific situations. Accomplish this with the bpf_override_funciton
helper. This will modify the probe'd callers return value to the
specified value and set the PC to an override function that simply
returns, bypassing the originally probed function. This gives us a nice
clean way to implement systematic error injection for all of our code
paths.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit e87c6bc385 ("bpf: permit multiple bpf attachments
for a single perf event") added support to attach multiple
bpf programs to a single perf event.
Although this provides flexibility, users may want to know
what other bpf programs attached to the same tp interface.
Besides getting visibility for the underlying bpf system,
such information may also help consolidate multiple bpf programs,
understand potential performance issues due to a large array,
and debug (e.g., one bpf program which overwrites return code
may impact subsequent program results).
Commit 2541517c32 ("tracing, perf: Implement BPF programs
attached to kprobes") utilized the existing perf ioctl
interface and added the command PERF_EVENT_IOC_SET_BPF
to attach a bpf program to a tracepoint. This patch adds a new
ioctl command, given a perf event fd, to query the bpf program
array attached to the same perf tracepoint event.
The new uapi ioctl command:
PERF_EVENT_IOC_QUERY_BPF
The new uapi/linux/perf_event.h structure:
struct perf_event_query_bpf {
__u32 ids_len;
__u32 prog_cnt;
__u32 ids[0];
};
User space provides buffer "ids" for kernel to copy to.
When returning from the kernel, the number of available
programs in the array is set in "prog_cnt".
The usage:
struct perf_event_query_bpf *query =
malloc(sizeof(*query) + sizeof(u32) * ids_len);
query.ids_len = ids_len;
err = ioctl(pmu_efd, PERF_EVENT_IOC_QUERY_BPF, query);
if (err == 0) {
/* query.prog_cnt is the number of available progs,
* number of progs in ids: (ids_len == 0) ? 0 : query.prog_cnt
*/
} else if (errno == ENOSPC) {
/* query.ids_len number of progs copied,
* query.prog_cnt is the number of available progs
*/
} else {
/* other errors */
}
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
cgropu+bpf prog array has a maximum number of 64 programs.
Let us apply the same limit here.
Fixes: e87c6bc385 ("bpf: permit multiple bpf attachments for a single perf event")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 9fd29c08e5 ("bpf: improve verifier ARG_CONST_SIZE_OR_ZERO
semantics") relaxed the treatment of ARG_CONST_SIZE_OR_ZERO due to the way
the compiler generates optimized BPF code when checking boundaries of an
argument from C code. A typical example of this optimized code can be
generated using the bpf_perf_event_output helper when operating on variable
memory:
/* len is a generic scalar */
if (len > 0 && len <= 0x7fff)
bpf_perf_event_output(ctx, &perf_map, 0, buf, len);
110: (79) r5 = *(u64 *)(r10 -40)
111: (bf) r1 = r5
112: (07) r1 += -1
113: (25) if r1 > 0x7ffe goto pc+6
114: (bf) r1 = r6
115: (18) r2 = 0xffff94e5f166c200
117: (b7) r3 = 0
118: (bf) r4 = r7
119: (85) call bpf_perf_event_output#25
R5 min value is negative, either use unsigned or 'var &= const'
With this code, the verifier loses track of the variable.
Replacing arg5 with ARG_CONST_SIZE_OR_ZERO is thus desirable since it
avoids this quite common case which leads to usability issues, and the
compiler generates code that the verifier can more easily test:
if (len <= 0x7fff)
bpf_perf_event_output(ctx, &perf_map, 0, buf, len);
or
bpf_perf_event_output(ctx, &perf_map, 0, buf, len & 0x7fff);
No changes to the bpf_perf_event_output helper are necessary since it can
handle a case where size is 0, and an empty frame is pushed.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Gianluca Borello <g.borello@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jianping Liu