Daniel Borkmann says:
====================
pull-request: bpf-next 2019-04-12
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Improve BPF verifier scalability for large programs through two
optimizations: i) remove verifier states that are not useful in pruning,
ii) stop walking parentage chain once first LIVE_READ is seen. Combined
gives approx 20x speedup. Increase limits for accepting large programs
under root, and add various stress tests, from Alexei.
2) Implement global data support in BPF. This enables static global variables
for .data, .rodata and .bss sections to be properly handled which allows
for more natural program development. This also opens up the possibility
to optimize program workflow by compiling ELFs only once and later only
rewriting section data before reload, from Daniel and with test cases and
libbpf refactoring from Joe.
3) Add config option to generate BTF type info for vmlinux as part of the
kernel build process. DWARF debug info is converted via pahole to BTF.
Latter relies on libbpf and makes use of BTF deduplication algorithm which
results in 100x savings compared to DWARF data. Resulting .BTF section is
typically about 2MB in size, from Andrii.
4) Add BPF verifier support for stack access with variable offset from
helpers and add various test cases along with it, from Andrey.
5) Extend bpf_skb_adjust_room() growth BPF helper to mark inner MAC header
so that L2 encapsulation can be used for tc tunnels, from Alan.
6) Add support for input __sk_buff context in BPF_PROG_TEST_RUN so that
users can define a subset of allowed __sk_buff fields that get fed into
the test program, from Stanislav.
7) Add bpf fs multi-dimensional array tests for BTF test suite and fix up
various UBSAN warnings in bpftool, from Yonghong.
8) Generate a pkg-config file for libbpf, from Luca.
9) Dump program's BTF id in bpftool, from Prashant.
10) libbpf fix to use smaller BPF log buffer size for AF_XDP's XDP
program, from Magnus.
11) kallsyms related fixes for the case when symbols are not present in
BPF selftests and samples, from Daniel
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new set of arguments to bpf_attr for BPF_PROG_TEST_RUN:
* ctx_in/ctx_size_in - input context
* ctx_out/ctx_size_out - output context
The intended use case is to pass some meta data to the test runs that
operate on skb (this has being brought up on recent LPC).
For programs that use bpf_prog_test_run_skb, support __sk_buff input and
output. Initially, from input __sk_buff, copy _only_ cb and priority into
skb, all other non-zero fields are prohibited (with EINVAL).
If the user has set ctx_out/ctx_size_out, copy the potentially modified
__sk_buff back to the userspace.
We require all fields of input __sk_buff except the ones we explicitly
support to be set to zero. The expectation is that in the future we might
add support for more fields and we want to fail explicitly if the user
runs the program on the kernel where we don't yet support them.
The API is intentionally vague (i.e. we don't explicitly add __sk_buff
to bpf_attr, but ctx_in) to potentially let other test_run types use
this interface in the future (this can be xdp_md for xdp types for
example).
v4:
* don't copy more than allowed in bpf_ctx_init [Martin]
v3:
* handle case where ctx_in is NULL, but ctx_out is not [Martin]
* convert size==0 checks to ptr==NULL checks and add some extra ptr
checks [Martin]
v2:
* Addressed comments from Martin Lau
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Given we'll be reusing BPF array maps for global data/bss/rodata
sections, we need a way to associate BTF DataSec type as its map
value type. In usual cases we have this ugly BPF_ANNOTATE_KV_PAIR()
macro hack e.g. via 38d5d3b3d5 ("bpf: Introduce BPF_ANNOTATE_KV_PAIR")
to get initial map to type association going. While more use cases
for it are discouraged, this also won't work for global data since
the use of array map is a BPF loader detail and therefore unknown
at compilation time. For array maps with just a single entry we make
an exception in terms of BTF in that key type is declared optional
if value type is of DataSec type. The latter LLVM is guaranteed to
emit and it also aligns with how we regard global data maps as just
a plain buffer area reusing existing map facilities for allowing
things like introspection with existing tools.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work adds kernel-side verification, logging and seq_show dumping
of BTF Var and DataSec kinds which are emitted with latest LLVM. The
following constraints apply:
BTF Var must have:
- Its kind_flag is 0
- Its vlen is 0
- Must point to a valid type
- Type must not resolve to a forward type
- Size of underlying type must be > 0
- Must have a valid name
- Can only be a source type, not sink or intermediate one
- Name may include dots (e.g. in case of static variables
inside functions)
- Cannot be a member of a struct/union
- Linkage so far can either only be static or global/allocated
BTF DataSec must have:
- Its kind_flag is 0
- Its vlen cannot be 0
- Its size cannot be 0
- Must have a valid name
- Can only be a source type, not sink or intermediate one
- Name may include dots (e.g. to represent .bss, .data, .rodata etc)
- Cannot be a member of a struct/union
- Inner btf_var_secinfo array with {type,offset,size} triple
must be sorted by offset in ascending order
- Type must always point to BTF Var
- BTF resolved size of Var must be <= size provided by triple
- DataSec size must be >= sum of triple sizes (thus holes
are allowed)
btf_var_resolve(), btf_ptr_resolve() and btf_modifier_resolve()
are on a high level quite similar but each come with slight,
subtle differences. They could potentially be a bit refactored
in future which hasn't been done here to ease review.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trivial addition to allow '.' aside from '_' as "special" characters
in the object name. Used to allow for substrings in maps from loader
side such as ".bss", ".data", ".rodata", but could also be useful for
other purposes.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a new BPF_MAP_FREEZE command which allows to
"freeze" the map globally as read-only / immutable from syscall
side.
Map permission handling has been refactored into map_get_sys_perms()
and drops FMODE_CAN_WRITE in case of locked map. Main use case is
to allow for setting up .rodata sections from the BPF ELF which
are loaded into the kernel, meaning BPF loader first allocates
map, sets up map value by copying .rodata section into it and once
complete, it calls BPF_MAP_FREEZE on the map fd to prevent further
modifications.
Right now BPF_MAP_FREEZE only takes map fd as argument while remaining
bpf_attr members are required to be zero. I didn't add write-only
locking here as counterpart since I don't have a concrete use-case
for it on my side, and I think it makes probably more sense to wait
once there is actually one. In that case bpf_attr can be extended
as usual with a flag field and/or others where flag 0 means that
we lock the map read-only hence this doesn't prevent to add further
extensions to BPF_MAP_FREEZE upon need.
A map creation flag like BPF_F_WRONCE was not considered for couple
of reasons: i) in case of a generic implementation, a map can consist
of more than just one element, thus there could be multiple map
updates needed to set the map into a state where it can then be
made immutable, ii) WRONCE indicates exact one-time write before
it is then set immutable. A generic implementation would set a bit
atomically on map update entry (if unset), indicating that every
subsequent update from then onwards will need to bail out there.
However, map updates can fail, so upon failure that flag would need
to be unset again and the update attempt would need to be repeated
for it to be eventually made immutable. While this can be made
race-free, this approach feels less clean and in combination with
reason i), it's not generic enough. A dedicated BPF_MAP_FREEZE
command directly sets the flag and caller has the guarantee that
map is immutable from syscall side upon successful return for any
future syscall invocations that would alter the map state, which
is also more intuitive from an API point of view. A command name
such as BPF_MAP_LOCK has been avoided as it's too close with BPF
map spin locks (which already has BPF_F_LOCK flag). BPF_MAP_FREEZE
is so far only enabled for privileged users.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This work adds two new map creation flags BPF_F_RDONLY_PROG
and BPF_F_WRONLY_PROG in order to allow for read-only or
write-only BPF maps from a BPF program side.
Today we have BPF_F_RDONLY and BPF_F_WRONLY, but this only
applies to system call side, meaning the BPF program has full
read/write access to the map as usual while bpf(2) calls with
map fd can either only read or write into the map depending
on the flags. BPF_F_RDONLY_PROG and BPF_F_WRONLY_PROG allows
for the exact opposite such that verifier is going to reject
program loads if write into a read-only map or a read into a
write-only map is detected. For read-only map case also some
helpers are forbidden for programs that would alter the map
state such as map deletion, update, etc. As opposed to the two
BPF_F_RDONLY / BPF_F_WRONLY flags, BPF_F_RDONLY_PROG as well
as BPF_F_WRONLY_PROG really do correspond to the map lifetime.
We've enabled this generic map extension to various non-special
maps holding normal user data: array, hash, lru, lpm, local
storage, queue and stack. Further generic map types could be
followed up in future depending on use-case. Main use case
here is to forbid writes into .rodata map values from verifier
side.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Both BPF_F_WRONLY / BPF_F_RDONLY flags are tied to the map file
descriptor, but not to the map object itself! Meaning, at map
creation time BPF_F_RDONLY can be set to make the map read-only
from syscall side, but this holds only for the returned fd, so
any other fd either retrieved via bpf file system or via map id
for the very same underlying map object can have read-write access
instead.
Given that, keeping the two flags around in the map_flags attribute
and exposing them to user space upon map dump is misleading and
may lead to false conclusions. Since these two flags are not
tied to the map object lets also not store them as map property.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This generic extension to BPF maps allows for directly loading
an address residing inside a BPF map value as a single BPF
ldimm64 instruction!
The idea is similar to what BPF_PSEUDO_MAP_FD does today, which
is a special src_reg flag for ldimm64 instruction that indicates
that inside the first part of the double insns's imm field is a
file descriptor which the verifier then replaces as a full 64bit
address of the map into both imm parts. For the newly added
BPF_PSEUDO_MAP_VALUE src_reg flag, the idea is the following:
the first part of the double insns's imm field is again a file
descriptor corresponding to the map, and the second part of the
imm field is an offset into the value. The verifier will then
replace both imm parts with an address that points into the BPF
map value at the given value offset for maps that support this
operation. Currently supported is array map with single entry.
It is possible to support more than just single map element by
reusing both 16bit off fields of the insns as a map index, so
full array map lookup could be expressed that way. It hasn't
been implemented here due to lack of concrete use case, but
could easily be done so in future in a compatible way, since
both off fields right now have to be 0 and would correctly
denote a map index 0.
The BPF_PSEUDO_MAP_VALUE is a distinct flag as otherwise with
BPF_PSEUDO_MAP_FD we could not differ offset 0 between load of
map pointer versus load of map's value at offset 0, and changing
BPF_PSEUDO_MAP_FD's encoding into off by one to differ between
regular map pointer and map value pointer would add unnecessary
complexity and increases barrier for debugability thus less
suitable. Using the second part of the imm field as an offset
into the value does /not/ come with limitations since maximum
possible value size is in u32 universe anyway.
This optimization allows for efficiently retrieving an address
to a map value memory area without having to issue a helper call
which needs to prepare registers according to calling convention,
etc, without needing the extra NULL test, and without having to
add the offset in an additional instruction to the value base
pointer. The verifier then treats the destination register as
PTR_TO_MAP_VALUE with constant reg->off from the user passed
offset from the second imm field, and guarantees that this is
within bounds of the map value. Any subsequent operations are
normally treated as typical map value handling without anything
extra needed from verification side.
The two map operations for direct value access have been added to
array map for now. In future other types could be supported as
well depending on the use case. The main use case for this commit
is to allow for BPF loader support for global variables that
reside in .data/.rodata/.bss sections such that we can directly
load the address of them with minimal additional infrastructure
required. Loader support has been added in subsequent commits for
libbpf library.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Minor comment merge conflict in mlx5.
Staging driver has a fixup due to the skb->xmit_more changes
in 'net-next', but was removed in 'net'.
Signed-off-by: David S. Miller <davem@davemloft.net>
check_stack_access() that prints verbose log is used in
adjust_ptr_min_max_vals() that prints its own verbose log and now they
stick together, e.g.:
variable stack access var_off=(0xfffffffffffffff0; 0x4) off=-16
size=1R2 stack pointer arithmetic goes out of range, prohibited for
!root
Add missing newline so that log is more readable:
variable stack access var_off=(0xfffffffffffffff0; 0x4) off=-16 size=1
R2 stack pointer arithmetic goes out of range, prohibited for !root
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As discussed in [1] max value of variable offset has to be checked for
overflow on stack access otherwise verifier would accept code like this:
0: (b7) r2 = 6
1: (b7) r3 = 28
2: (7a) *(u64 *)(r10 -16) = 0
3: (7a) *(u64 *)(r10 -8) = 0
4: (79) r4 = *(u64 *)(r1 +168)
5: (c5) if r4 s< 0x0 goto pc+4
R1=ctx(id=0,off=0,imm=0) R2=inv6 R3=inv28
R4=inv(id=0,umax_value=9223372036854775807,var_off=(0x0;
0x7fffffffffffffff)) R10=fp0,call_-1 fp-8=mmmmmmmm fp-16=mmmmmmmm
6: (17) r4 -= 16
7: (0f) r4 += r10
8: (b7) r5 = 8
9: (85) call bpf_getsockopt#57
10: (b7) r0 = 0
11: (95) exit
, where R4 obviosly has unbounded max value.
Fix it by checking that reg->smax_value is inside (-BPF_MAX_VAR_OFF;
BPF_MAX_VAR_OFF) range.
reg->smax_value is used instead of reg->umax_value because stack
pointers are calculated using negative offset from fp. This is opposite
to e.g. map access where offset must be non-negative and where
umax_value is used.
Also dedicated verbose logs are added for both min and max bound check
failures to have diagnostics consistent with variable offset handling in
check_map_access().
[1] https://marc.info/?l=linux-netdev&m=155433357510597&w=2
Fixes: 2011fccfb6 ("bpf: Support variable offset stack access from helpers")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Proper support of indirect stack access with variable offset in
unprivileged mode (!root) requires corresponding support in Spectre
masking for stack ALU in retrieve_ptr_limit().
There are no use-case for variable offset in unprivileged mode though so
make verifier reject such accesses for simplicity.
Pointer arithmetics is one (and only?) way to cause variable offset and
it's already rejected in unpriv mode so that verifier won't even get to
helper function whose argument contains variable offset, e.g.:
0: (7a) *(u64 *)(r10 -16) = 0
1: (7a) *(u64 *)(r10 -8) = 0
2: (61) r2 = *(u32 *)(r1 +0)
3: (57) r2 &= 4
4: (17) r2 -= 16
5: (0f) r2 += r10
variable stack access var_off=(0xfffffffffffffff0; 0x4) off=-16 size=1R2
stack pointer arithmetic goes out of range, prohibited for !root
Still it looks like a good idea to reject variable offset indirect stack
access for unprivileged mode in check_stack_boundary() explicitly.
Fixes: 2011fccfb6 ("bpf: Support variable offset stack access from helpers")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
It's hard to guarantee that whole memory is marked as initialized on
helper return if uninitialized stack is accessed with variable offset
since specific bounds are unknown to verifier. This may cause
uninitialized stack leaking.
Reject such an access in check_stack_boundary to prevent possible
leaking.
There are no known use-cases for indirect uninitialized stack access
with variable offset so it shouldn't break anything.
Fixes: 2011fccfb6 ("bpf: Support variable offset stack access from helpers")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The existing 16Mbyte verifier log limit is not enough for log_level=2
even for small programs. Increase it to 1Gbyte.
Note it's not a kernel memory limit.
It's an amount of memory user space provides to store
the verifier log. The kernel populates it 1k at a time.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Large verifier speed improvements allow to increase
verifier complexity limit.
Now regardless of the program composition and its size it takes
little time for the verifier to hit insn_processed limit.
On typical x86 machine non-debug kernel processes 1M instructions
in 1/10 of a second.
(before these speed improvements specially crafted programs
could be hitting multi-second verification times)
Full kasan kernel with debug takes ~1 second for the same 1M insns.
Hence bump the BPF_COMPLEXITY_LIMIT_INSNS limit to 1M.
Also increase the number of instructions per program
from 4k to internal BPF_COMPLEXITY_LIMIT_INSNS limit.
4k limit was confusing to users, since small programs with hundreds
of insns could be hitting BPF_COMPLEXITY_LIMIT_INSNS limit.
Sometimes adding more insns and bpf_trace_printk debug statements
would make the verifier accept the program while removing
code would make the verifier reject it.
Some user space application started to add #define MAX_FOO to
their programs and do:
MAX_FOO=100;
again:
compile with MAX_FOO;
try to load;
if (fails_to_load) { reduce MAX_FOO; goto again; }
to be able to fit maximum amount of processing into single program.
Other users artificially split their single program into a set of programs
and use all 32 iterations of tail_calls to increase compute limits.
And the most advanced folks used unlimited tc-bpf filter list
to execute many bpf programs.
Essentially the users managed to workaround 4k insn limit.
This patch removes the limit for root programs from uapi.
BPF_COMPLEXITY_LIMIT_INSNS is the kernel internal limit
and success to load the program no longer depends on program size,
but on 'smartness' of the verifier only.
The verifier will continue to get smarter with every kernel release.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Larger programs may trigger 16-bit jump offset overflow check
during instruction patching. Make this error verbose otherwise
users cannot decipher error code without printks in the verifier.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Temporary arrays used during program verification need to be vmalloc-ed
to support large bpf programs.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
With large verifier speed improvement brought by the previous patch
mark_reg_read() becomes the hottest function during verification.
On a typical program it consumes 40% of cpu.
mark_reg_read() walks parentage chain of registers to mark parents as LIVE_READ.
Once the register is marked there is no need to remark it again in the future.
Hence stop walking the chain once first LIVE_READ is seen.
This optimization drops mark_reg_read() time from 40% of cpu to <1%
and overall 2x improvement of verification speed.
For some programs the longest_mark_read_walk counter improves from ~500 to ~5
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Branch instructions, branch targets and calls in a bpf program are
the places where the verifier remembers states that led to successful
verification of the program.
These states are used to prune brute force program analysis.
For unprivileged programs there is a limit of 64 states per such
'branching' instructions (maximum length is tracked by max_states_per_insn
counter introduced in the previous patch).
Simply reducing this threshold to 32 or lower increases insn_processed
metric to the point that small valid programs get rejected.
For root programs there is no limit and cilium programs can have
max_states_per_insn to be 100 or higher.
Walking 100+ states multiplied by number of 'branching' insns during
verification consumes significant amount of cpu time.
Turned out simple LRU-like mechanism can be used to remove states
that unlikely will be helpful in future search pruning.
This patch introduces hit_cnt and miss_cnt counters:
hit_cnt - this many times this state successfully pruned the search
miss_cnt - this many times this state was not equivalent to other states
(and that other states were added to state list)
The heuristic introduced in this patch is:
if (sl->miss_cnt > sl->hit_cnt * 3 + 3)
/* drop this state from future considerations */
Higher numbers increase max_states_per_insn (allow more states to be
considered for pruning) and slow verification speed, but do not meaningfully
reduce insn_processed metric.
Lower numbers drop too many states and insn_processed increases too much.
Many different formulas were considered.
This one is simple and works well enough in practice.
(the analysis was done on selftests/progs/* and on cilium programs)
The end result is this heuristic improves verification speed by 10 times.
Large synthetic programs that used to take a second more now take
1/10 of a second.
In cases where max_states_per_insn used to be 100 or more, now it's ~10.
There is a slight increase in insn_processed for cilium progs:
before after
bpf_lb-DLB_L3.o 1831 1838
bpf_lb-DLB_L4.o 3029 3218
bpf_lb-DUNKNOWN.o 1064 1064
bpf_lxc-DDROP_ALL.o 26309 26935
bpf_lxc-DUNKNOWN.o 33517 34439
bpf_netdev.o 9713 9721
bpf_overlay.o 6184 6184
bpf_lcx_jit.o 37335 39389
And 2-3 times improvement in the verification speed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In order to understand the verifier bottlenecks add various stats
and extend log_level:
log_level 1 and 2 are kept as-is:
bit 0 - level=1 - print every insn and verifier state at branch points
bit 1 - level=2 - print every insn and verifier state at every insn
bit 2 - level=4 - print verifier error and stats at the end of verification
When verifier rejects the program the libbpf is trying to load the program twice.
Once with log_level=0 (no messages, only error code is reported to user space)
and second time with log_level=1 to tell the user why the verifier rejected it.
With introduction of bit 2 - level=4 the libbpf can choose to always use that
level and load programs once, since the verification speed is not affected and
in case of error the verbose message will be available.
Note that the verifier stats are not part of uapi just like all other
verbose messages. They're expected to change in the future.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We want to avoid leaking pointer info from xdp_frame (that is placed in
top of frame) like commit 6dfb970d3d ("xdp: avoid leaking info stored in
frame data on page reuse"), and followup commit 97e19cce05 ("bpf:
reserve xdp_frame size in xdp headroom") that reserve this headroom.
These changes also affected how cpumap constructed SKBs, as xdpf->headroom
size changed, the skb data starting point were in-effect shifted with 32
bytes (sizeof xdp_frame). This was still okay, as the cpumap frame_size
calculation also included xdpf->headroom which were reduced by same amount.
A bug was introduced in commit 77ea5f4cbe ("bpf/cpumap: make sure
frame_size for build_skb is aligned if headroom isn't"), where the
xdpf->headroom became part of the SKB_DATA_ALIGN rounding up. This
round-up to find the frame_size is in principle still correct as it does
not exceed the 2048 bytes frame_size (which is max for ixgbe and i40e),
but the 32 bytes offset of pkt_data_start puts this over the 2048 bytes
limit. This cause skb_shared_info to spill into next frame. It is a little
hard to trigger, as the SKB need to use above 15 skb_shinfo->frags[] as
far as I calculate. This does happen in practise for TCP streams when
skb_try_coalesce() kicks in.
KASAN can be used to detect these wrong memory accesses, I've seen:
BUG: KASAN: use-after-free in skb_try_coalesce+0x3cb/0x760
BUG: KASAN: wild-memory-access in skb_release_data+0xe2/0x250
Driver veth also construct a SKB from xdp_frame in this way, but is not
affected, as it doesn't reserve/deduct the room (used by xdp_frame) from
the SKB headroom. Instead is clears the pointers via xdp_scrub_frame(),
and allows SKB to use this area.
The fix in this patch is to do like veth and instead allow SKB to (re)use
the area occupied by xdp_frame, by clearing via xdp_scrub_frame(). (This
does kill the idea of the SKB being able to access (mem) info from this
area, but I guess it was a bad idea anyhow, and it was already killed by
the veth changes.)
Fixes: 77ea5f4cbe ("bpf/cpumap: make sure frame_size for build_skb is aligned if headroom isn't")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently there is a difference in how verifier checks memory access for
helper arguments for PTR_TO_MAP_VALUE and PTR_TO_STACK with regard to
variable part of offset.
check_map_access, that is used for PTR_TO_MAP_VALUE, can handle variable
offsets just fine, so that BPF program can call a helper like this:
some_helper(map_value_ptr + off, size);
, where offset is unknown at load time, but is checked by program to be
in a safe rage (off >= 0 && off + size < map_value_size).
But it's not the case for check_stack_boundary, that is used for
PTR_TO_STACK, and same code with pointer to stack is rejected by
verifier:
some_helper(stack_value_ptr + off, size);
For example:
0: (7a) *(u64 *)(r10 -16) = 0
1: (7a) *(u64 *)(r10 -8) = 0
2: (61) r2 = *(u32 *)(r1 +0)
3: (57) r2 &= 4
4: (17) r2 -= 16
5: (0f) r2 += r10
6: (18) r1 = 0xffff888111343a80
8: (85) call bpf_map_lookup_elem#1
invalid variable stack read R2 var_off=(0xfffffffffffffff0; 0x4)
Add support for variable offset access to check_stack_boundary so that
if offset is checked by program to be in a safe range it's accepted by
verifier.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF verifier checks the maximum number of call stack frames twice,
first in the main CFG traversal (do_check) and then in a subsequent
traversal (check_max_stack_depth). If the second check fails, it logs a
'verifier bug' warning and errors out, as the number of call stack frames
should have been verified already.
However, the second check may fail without indicating a verifier bug: if
the excessive function calls reside in dead code, the main CFG traversal
may not visit them; the subsequent traversal visits all instructions,
including dead code.
This case raises the question of how invalid dead code should be treated.
This patch implements the conservative option and rejects such code.
Signed-off-by: Paul Chaignon <paul.chaignon@orange.com>
Tested-by: Xiao Han <xiao.han@orange.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzkaller was able to generate the following UAF in bpf:
BUG: KASAN: use-after-free in lookup_last fs/namei.c:2269 [inline]
BUG: KASAN: use-after-free in path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
Read of size 1 at addr ffff8801c4865c47 by task syz-executor2/9423
CPU: 0 PID: 9423 Comm: syz-executor2 Not tainted 4.20.0-rc1-next-20181109+
#110
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x244/0x39d lib/dump_stack.c:113
print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
__asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430
lookup_last fs/namei.c:2269 [inline]
path_lookupat.isra.43+0x9f8/0xc00 fs/namei.c:2318
filename_lookup+0x26a/0x520 fs/namei.c:2348
user_path_at_empty+0x40/0x50 fs/namei.c:2608
user_path include/linux/namei.h:62 [inline]
do_mount+0x180/0x1ff0 fs/namespace.c:2980
ksys_mount+0x12d/0x140 fs/namespace.c:3258
__do_sys_mount fs/namespace.c:3272 [inline]
__se_sys_mount fs/namespace.c:3269 [inline]
__x64_sys_mount+0xbe/0x150 fs/namespace.c:3269
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457569
Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fde6ed96c78 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000457569
RDX: 0000000020000040 RSI: 0000000020000000 RDI: 0000000000000000
RBP: 000000000072bf00 R08: 0000000020000340 R09: 0000000000000000
R10: 0000000000200000 R11: 0000000000000246 R12: 00007fde6ed976d4
R13: 00000000004c2c24 R14: 00000000004d4990 R15: 00000000ffffffff
Allocated by task 9424:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
__do_kmalloc mm/slab.c:3722 [inline]
__kmalloc_track_caller+0x157/0x760 mm/slab.c:3737
kstrdup+0x39/0x70 mm/util.c:49
bpf_symlink+0x26/0x140 kernel/bpf/inode.c:356
vfs_symlink+0x37a/0x5d0 fs/namei.c:4127
do_symlinkat+0x242/0x2d0 fs/namei.c:4154
__do_sys_symlink fs/namei.c:4173 [inline]
__se_sys_symlink fs/namei.c:4171 [inline]
__x64_sys_symlink+0x59/0x80 fs/namei.c:4171
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Freed by task 9425:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3817
bpf_evict_inode+0x11f/0x150 kernel/bpf/inode.c:565
evict+0x4b9/0x980 fs/inode.c:558
iput_final fs/inode.c:1550 [inline]
iput+0x674/0xa90 fs/inode.c:1576
do_unlinkat+0x733/0xa30 fs/namei.c:4069
__do_sys_unlink fs/namei.c:4110 [inline]
__se_sys_unlink fs/namei.c:4108 [inline]
__x64_sys_unlink+0x42/0x50 fs/namei.c:4108
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
In this scenario path lookup under RCU is racing with the final
unlink in case of symlinks. As Linus puts it in his analysis:
[...] We actually RCU-delay the inode freeing itself, but
when we do the final iput(), the "evict()" function is called
synchronously. Now, the simple fix would seem to just RCU-delay
the kfree() of the symlink data in bpf_evict_inode(). Maybe
that's the right thing to do. [...]
Al suggested to piggy-back on the ->destroy_inode() callback in
order to implement RCU deferral there which can then kfree() the
inode->i_link eventually right before putting inode back into
inode cache. By reusing free_inode_nonrcu() from there we can
avoid the need for our own inode cache and just reuse generic
one as we currently do.
And in-fact on top of all this we should just get rid of the
bpf_evict_inode() entirely. This means truncate_inode_pages_final()
and clear_inode() will then simply be called by the fs core via
evict(). Dropping the reference should really only be done when
inode is unhashed and nothing reachable anymore, so it's better
also moved into the final ->destroy_inode() callback.
Fixes: 0f98621bef ("bpf, inode: add support for symlinks and fix mtime/ctime")
Reported-by: syzbot+fb731ca573367b7f6564@syzkaller.appspotmail.com
Reported-by: syzbot+a13e5ead792d6df37818@syzkaller.appspotmail.com
Reported-by: syzbot+7a8ba368b47fdefca61e@syzkaller.appspotmail.com
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/lkml/0000000000006946d2057bbd0eef@google.com/T/
Commit 7640ead939 ("bpf: verifier: make sure callees don't prune
with caller differences") connected up parentage chains of all
frames of the stack. It didn't, however, ensure propagate_liveness()
propagates all liveness information along those chains.
This means pruning happening in the callee may generate explored
states with incomplete liveness for the chains in lower frames
of the stack.
The included selftest is similar to the prior one from commit
7640ead939 ("bpf: verifier: make sure callees don't prune with
caller differences"), where callee would prune regardless of the
difference in r8 state.
Now we also initialize r9 to 0 or 1 based on a result from get_random().
r9 is never read so the walk with r9 = 0 gets pruned (correctly) after
the walk with r9 = 1 completes.
The selftest is so arranged that the pruning will happen in the
callee. Since callee does not propagate read marks of r8, the
explored state at the pruning point prior to the callee will
now ignore r8.
Propagate liveness on all frames of the stack when pruning.
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow looking up a sock_common. This gives eBPF programs
access to timewait and request sockets.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It's currently not possible to access timewait or request sockets
from eBPF, since there is no way to return a PTR_TO_SOCK_COMMON
from a helper. Introduce RET_PTR_TO_SOCK_COMMON to enable this
behaviour.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
So far, the verifier only acquires reference tracking state for
RET_PTR_TO_SOCKET_OR_NULL. Instead of extending this for every
new return type which desires these semantics, acquire reference
tracking state iff the called helper is an acquire function.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Syzkaller hit 'KASAN: use-after-free Write in sanitize_ptr_alu' bug.
Call trace:
dump_stack+0xbf/0x12e
print_address_description+0x6a/0x280
kasan_report+0x237/0x360
sanitize_ptr_alu+0x85a/0x8d0
adjust_ptr_min_max_vals+0x8f2/0x1ca0
adjust_reg_min_max_vals+0x8ed/0x22e0
do_check+0x1ca6/0x5d00
bpf_check+0x9ca/0x2570
bpf_prog_load+0xc91/0x1030
__se_sys_bpf+0x61e/0x1f00
do_syscall_64+0xc8/0x550
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fault injection trace:
kfree+0xea/0x290
free_func_state+0x4a/0x60
free_verifier_state+0x61/0xe0
push_stack+0x216/0x2f0 <- inject failslab
sanitize_ptr_alu+0x2b1/0x8d0
adjust_ptr_min_max_vals+0x8f2/0x1ca0
adjust_reg_min_max_vals+0x8ed/0x22e0
do_check+0x1ca6/0x5d00
bpf_check+0x9ca/0x2570
bpf_prog_load+0xc91/0x1030
__se_sys_bpf+0x61e/0x1f00
do_syscall_64+0xc8/0x550
entry_SYSCALL_64_after_hwframe+0x49/0xbe
When kzalloc() fails in push_stack(), free_verifier_state() will free
current verifier state. As push_stack() returns, dst_reg was restored
if ptr_is_dst_reg is false. However, as member of the cur_state,
dst_reg is also freed, and error occurs when dereferencing dst_reg.
Simply fix it by testing ret of push_stack() before restoring dst_reg.
Fixes: 979d63d50c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Signed-off-by: Xu Yu <xuyu@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Naresh reported that test_align fails because of the mismatch at the
verbose printout of the register states. The reason is due to the newly
added ref_obj_id.
ref_obj_id is only useful for refcounted reg. Thus, this patch fixes it
by only printing ref_obj_id for refcounted reg. While at it, it also uses
comma instead of space to separate between "id" and "ref_obj_id".
Fixes: 1b98658968 ("bpf: Fix bpf_tcp_sock and bpf_sk_fullsock issue related to bpf_sk_release")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
It has been observed that sometimes a higher order memory allocation
for BPF maps fails when there is no obvious memory pressure in a system.
E.g. the map (BPF_MAP_TYPE_LRU_HASH, key=38, value=56, max_elems=524288)
could not be created due to vmalloc unable to allocate 75497472B,
when the system's memory consumption (in MB) was the following:
Total: 3942 Used: 837 (21.24%) Free: 138 Buffers: 239 Cached: 2727
Later analysis [1] by Michal Hocko showed that the vmalloc was not trying
to reclaim memory from the page cache and was failing prematurely due to
__GFP_NORETRY.
Considering dcda9b0471 ("mm, tree wide: replace __GFP_REPEAT by
__GFP_RETRY_MAYFAIL with more useful semantic") and [1], we can replace
__GFP_NORETRY with __GFP_RETRY_MAYFAIL, as it won't invoke OOM killer
and will try harder to fulfil allocation requests.
Unfortunately, replacing the body of the BPF map memory allocation
function with the kvmalloc_node helper function is not an option at
this point in time, given 1) kmalloc is non-optional for higher order
allocations, and 2) passing __GFP_RETRY_MAYFAIL to the kmalloc would
stress the slab allocator too much for large requests.
The change has been tested with the workloads mentioned above and by
observing oom_kill value from /proc/vmstat.
[1]: https://lore.kernel.org/bpf/20190310071318.GW5232@dhcp22.suse.cz/
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Acked-by: Yonghong Song <yhs@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20190318153940.GL8924@dhcp22.suse.cz/
Daniel Borkmann says:
====================
pull-request: bpf 2019-03-16
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a umem memory leak on cleanup in AF_XDP, from Björn.
2) Fix BTF to properly resolve forward-declared enums into their corresponding
full enum definition types during deduplication, from Andrii.
3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus.
4) Fix accessing invalid pointer returned from bpf_tcp_sock() and
bpf_sk_fullsock() after bpf_sk_release() was called, from Martin.
5) Fix generation of load/store DW instructions in PPC JIT, from Naveen.
6) Various fixes in BPF helper function documentation in bpf.h UAPI header
used to bpf-helpers(7) man page, from Quentin.
7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenz Bauer [thanks!] reported that a ptr returned by bpf_tcp_sock(sk)
can still be accessed after bpf_sk_release(sk).
Both bpf_tcp_sock() and bpf_sk_fullsock() have the same issue.
This patch addresses them together.
A simple reproducer looks like this:
sk = bpf_sk_lookup_tcp();
/* if (!sk) ... */
tp = bpf_tcp_sock(sk);
/* if (!tp) ... */
bpf_sk_release(sk);
snd_cwnd = tp->snd_cwnd; /* oops! The verifier does not complain. */
The problem is the verifier did not scrub the register's states of
the tcp_sock ptr (tp) after bpf_sk_release(sk).
[ Note that when calling bpf_tcp_sock(sk), the sk is not always
refcount-acquired. e.g. bpf_tcp_sock(skb->sk). The verifier works
fine for this case. ]
Currently, the verifier does not track if a helper's return ptr (in REG_0)
is "carry"-ing one of its argument's refcount status. To carry this info,
the reg1->id needs to be stored in reg0.
One approach was tried, like "reg0->id = reg1->id", when calling
"bpf_tcp_sock()". The main idea was to avoid adding another "ref_obj_id"
for the same reg. However, overlapping the NULL marking and ref
tracking purpose in one "id" does not work well:
ref_sk = bpf_sk_lookup_tcp();
fullsock = bpf_sk_fullsock(ref_sk);
tp = bpf_tcp_sock(ref_sk);
if (!fullsock) {
bpf_sk_release(ref_sk);
return 0;
}
/* fullsock_reg->id is marked for NOT-NULL.
* Same for tp_reg->id because they have the same id.
*/
/* oops. verifier did not complain about the missing !tp check */
snd_cwnd = tp->snd_cwnd;
Hence, a new "ref_obj_id" is needed in "struct bpf_reg_state".
With a new ref_obj_id, when bpf_sk_release(sk) is called, the verifier can
scrub all reg states which has a ref_obj_id match. It is done with the
changes in release_reg_references() in this patch.
While fixing it, sk_to_full_sk() is removed from bpf_tcp_sock() and
bpf_sk_fullsock() to avoid these helpers from returning
another ptr. It will make bpf_sk_release(tp) possible:
sk = bpf_sk_lookup_tcp();
/* if (!sk) ... */
tp = bpf_tcp_sock(sk);
/* if (!tp) ... */
bpf_sk_release(tp);
A separate helper "bpf_get_listener_sock()" will be added in a later
patch to do sk_to_full_sk().
Misc change notes:
- To allow bpf_sk_release(tp), the arg of bpf_sk_release() is changed
from ARG_PTR_TO_SOCKET to ARG_PTR_TO_SOCK_COMMON. ARG_PTR_TO_SOCKET
is removed from bpf.h since no helper is using it.
- arg_type_is_refcounted() is renamed to arg_type_may_be_refcounted()
because ARG_PTR_TO_SOCK_COMMON is the only one and skb->sk is not
refcounted. All bpf_sk_release(), bpf_sk_fullsock() and bpf_tcp_sock()
take ARG_PTR_TO_SOCK_COMMON.
- check_refcount_ok() ensures is_acquire_function() cannot take
arg_type_may_be_refcounted() as its argument.
- The check_func_arg() can only allow one refcount-ed arg. It is
guaranteed by check_refcount_ok() which ensures at most one arg can be
refcounted. Hence, it is a verifier internal error if >1 refcount arg
found in check_func_arg().
- In release_reference(), release_reference_state() is called
first to ensure a match on "reg->ref_obj_id" can be found before
scrubbing the reg states with release_reg_references().
- reg_is_refcounted() is no longer needed.
1. In mark_ptr_or_null_regs(), its usage is replaced by
"ref_obj_id && ref_obj_id == id" because,
when is_null == true, release_reference_state() should only be
called on the ref_obj_id obtained by a acquire helper (i.e.
is_acquire_function() == true). Otherwise, the following
would happen:
sk = bpf_sk_lookup_tcp();
/* if (!sk) { ... } */
fullsock = bpf_sk_fullsock(sk);
if (!fullsock) {
/*
* release_reference_state(fullsock_reg->ref_obj_id)
* where fullsock_reg->ref_obj_id == sk_reg->ref_obj_id.
*
* Hence, the following bpf_sk_release(sk) will fail
* because the ref state has already been released in the
* earlier release_reference_state(fullsock_reg->ref_obj_id).
*/
bpf_sk_release(sk);
}
2. In release_reg_references(), the current reg_is_refcounted() call
is unnecessary because the id check is enough.
- The type_is_refcounted() and type_is_refcounted_or_null()
are no longer needed also because reg_is_refcounted() is removed.
Fixes: 655a51e536 ("bpf: Add struct bpf_tcp_sock and BPF_FUNC_tcp_sock")
Reported-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from David Miller:
"First batch of fixes in the new merge window:
1) Double dst_cache free in act_tunnel_key, from Wenxu.
2) Avoid NULL deref in IN_DEV_MFORWARD() by failing early in the
ip_route_input_rcu() path, from Paolo Abeni.
3) Fix appletalk compile regression, from Arnd Bergmann.
4) If SLAB objects reach the TCP sendpage method we are in serious
trouble, so put a debugging check there. From Vasily Averin.
5) Memory leak in hsr layer, from Mao Wenan.
6) Only test GSO type on GSO packets, from Willem de Bruijn.
7) Fix crash in xsk_diag_put_umem(), from Eric Dumazet.
8) Fix VNIC mailbox length in nfp, from Dirk van der Merwe.
9) Fix race in ipv4 route exception handling, from Xin Long.
10) Missing DMA memory barrier in hns3 driver, from Jian Shen.
11) Use after free in __tcf_chain_put(), from Vlad Buslov.
12) Handle inet_csk_reqsk_queue_add() failures, from Guillaume Nault.
13) Return value correction when ip_mc_may_pull() fails, from Eric
Dumazet.
14) Use after free in x25_device_event(), also from Eric"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (72 commits)
gro_cells: make sure device is up in gro_cells_receive()
vxlan: test dev->flags & IFF_UP before calling gro_cells_receive()
net/x25: fix use-after-free in x25_device_event()
isdn: mISDNinfineon: fix potential NULL pointer dereference
net: hns3: fix to stop multiple HNS reset due to the AER changes
ip: fix ip_mc_may_pull() return value
net: keep refcount warning in reqsk_free()
net: stmmac: Avoid one more sometimes uninitialized Clang warning
net: dsa: mv88e6xxx: Set correct interface mode for CPU/DSA ports
rxrpc: Fix client call queueing, waiting for channel
tcp: handle inet_csk_reqsk_queue_add() failures
net: ethernet: sun: Zero initialize class in default case in niu_add_ethtool_tcam_entry
8139too : Add support for U.S. Robotics USR997901A 10/100 Cardbus NIC
fou, fou6: avoid uninit-value in gue_err() and gue6_err()
net: sched: fix potential use-after-free in __tcf_chain_put()
vhost: silence an unused-variable warning
vsock/virtio: fix kernel panic from virtio_transport_reset_no_sock
connector: fix unsafe usage of ->real_parent
vxlan: do not need BH again in vxlan_cleanup()
net: hns3: add dma_rmb() for rx description
...
Non-zero imm value in the second part of the ldimm64 instruction for
BPF_PSEUDO_MAP_FD is invalid, and thus must be rejected. The map fd
only ever sits in the first instructions' imm field. None of the BPF
loaders known to us are using it, so risk of regression is minimal.
For clarity and consistency, the few insn->{src_reg,imm} occurrences
are rewritten into insn[0].{src_reg,imm}. Add a test case to the BPF
selftest suite as well.
Fixes: 0246e64d9a ("bpf: handle pseudo BPF_LD_IMM64 insn")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull perf updates from Ingo Molnar:
"Lots of tooling updates - too many to list, here's a few highlights:
- Various subcommand updates to 'perf trace', 'perf report', 'perf
record', 'perf annotate', 'perf script', 'perf test', etc.
- CPU and NUMA topology and affinity handling improvements,
- HW tracing and HW support updates:
- Intel PT updates
- ARM CoreSight updates
- vendor HW event updates
- BPF updates
- Tons of infrastructure updates, both on the build system and the
library support side
- Documentation updates.
- ... and lots of other changes, see the changelog for details.
Kernel side updates:
- Tighten up kprobes blacklist handling, reduce the number of places
where developers can install a kprobe and hang/crash the system.
- Fix/enhance vma address filter handling.
- Various PMU driver updates, small fixes and additions.
- refcount_t conversions
- BPF updates
- error code propagation enhancements
- misc other changes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (238 commits)
perf script python: Add Python3 support to syscall-counts-by-pid.py
perf script python: Add Python3 support to syscall-counts.py
perf script python: Add Python3 support to stat-cpi.py
perf script python: Add Python3 support to stackcollapse.py
perf script python: Add Python3 support to sctop.py
perf script python: Add Python3 support to powerpc-hcalls.py
perf script python: Add Python3 support to net_dropmonitor.py
perf script python: Add Python3 support to mem-phys-addr.py
perf script python: Add Python3 support to failed-syscalls-by-pid.py
perf script python: Add Python3 support to netdev-times.py
perf tools: Add perf_exe() helper to find perf binary
perf script: Handle missing fields with -F +..
perf data: Add perf_data__open_dir_data function
perf data: Add perf_data__(create_dir|close_dir) functions
perf data: Fail check_backup in case of error
perf data: Make check_backup work over directories
perf tools: Add rm_rf_perf_data function
perf tools: Add pattern name checking to rm_rf
perf tools: Add depth checking to rm_rf
perf data: Add global path holder
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-03-04
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add AF_XDP support to libbpf. Rationale is to facilitate writing
AF_XDP applications by offering higher-level APIs that hide many
of the details of the AF_XDP uapi. Sample programs are converted
over to this new interface as well, from Magnus.
2) Introduce a new cant_sleep() macro for annotation of functions
that cannot sleep and use it in BPF_PROG_RUN() to assert that
BPF programs run under preemption disabled context, from Peter.
3) Introduce per BPF prog stats in order to monitor the usage
of BPF; this is controlled by kernel.bpf_stats_enabled sysctl
knob where monitoring tools can make use of this to efficiently
determine the average cost of programs, from Alexei.
4) Split up BPF selftest's test_progs similarly as we already
did with test_verifier. This allows to further reduce merge
conflicts in future and to get more structure into our
quickly growing BPF selftest suite, from Stanislav.
5) Fix a bug in BTF's dedup algorithm which can cause an infinite
loop in some circumstances; also various BPF doc fixes and
improvements, from Andrii.
6) Various BPF sample cleanups and migration to libbpf in order
to further isolate the old sample loader code (so we can get
rid of it at some point), from Jakub.
7) Add a new BPF helper for BPF cgroup skb progs that allows
to set ECN CE code point and a Host Bandwidth Manager (HBM)
sample program for limiting the bandwidth used by v2 cgroups,
from Lawrence.
8) Enable write access to skb->queue_mapping from tc BPF egress
programs in order to let BPF pick TX queue, from Jesper.
9) Fix a bug in BPF spinlock handling for map-in-map which did
not propagate spin_lock_off to the meta map, from Yonghong.
10) Fix a bug in the new per-CPU BPF prog counters to properly
initialize stats for each CPU, from Eric.
11) Add various BPF helper prototypes to selftest's bpf_helpers.h,
from Willem.
12) Fix various BPF samples bugs in XDP and tracing progs,
from Toke, Daniel and Yonghong.
13) Silence preemption splat in test_bpf after BPF_PROG_RUN()
enforces it now everywhere, from Anders.
14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to
get error handling working, from Dan.
15) Fix bpftool documentation and auto-completion with regards
to stream_{verdict,parser} attach types, from Alban.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek reported that he saw an issue with the below snippet in that
timing measurements where off when loaded as unpriv while results
were reasonable when loaded as privileged:
[...]
uint64_t a = bpf_ktime_get_ns();
uint64_t b = bpf_ktime_get_ns();
uint64_t delta = b - a;
if ((int64_t)delta > 0) {
[...]
Turns out there is a bug where a corner case is missing in the fix
d3bd7413e0 ("bpf: fix sanitation of alu op with pointer / scalar
type from different paths"), namely fixup_bpf_calls() only checks
whether aux has a non-zero alu_state, but it also needs to test for
the case of BPF_ALU_NON_POINTER since in both occasions we need to
skip the masking rewrite (as there is nothing to mask).
Fixes: d3bd7413e0 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Reported-by: Arthur Fabre <afabre@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We need to iterate through all possible cpus.
Fixes: 492ecee892 ("bpf: enable program stats")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In bpf/syscall.c, map_create() first set map->usercnt to 1, a file
descriptor is supposed to return to userspace. When bpf_map_new_fd()
fails, drop the refcount.
Fixes: bd5f5f4ecb ("bpf: Add BPF_MAP_GET_FD_BY_ID")
Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit d83525ca62 ("bpf: introduce bpf_spin_lock")
introduced bpf_spin_lock and the field spin_lock_off
in kernel internal structure bpf_map has the following
meaning:
>=0 valid offset, <0 error
For every map created, the kernel will ensure
spin_lock_off has correct value.
Currently, bpf_map->spin_lock_off is not copied
from the inner map to the map_in_map inner_map_meta
during a map_in_map type map creation, so
inner_map_meta->spin_lock_off = 0.
This will give verifier wrong information that
inner_map has bpf_spin_lock and the bpf_spin_lock
is defined at offset 0. An access to offset 0
of a value pointer will trigger the following error:
bpf_spin_lock cannot be accessed directly by load/store
This patch fixed the issue by copy inner map's spin_lock_off
value to inner_map_meta->spin_lock_off.
Fixes: d83525ca62 ("bpf: introduce bpf_spin_lock")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Return bpf program run_time_ns and run_cnt via bpf_prog_info
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
JITed BPF programs are indistinguishable from kernel functions, but unlike
kernel code BPF code can be changed often.
Typical approach of "perf record" + "perf report" profiling and tuning of
kernel code works just as well for BPF programs, but kernel code doesn't
need to be monitored whereas BPF programs do.
Users load and run large amount of BPF programs.
These BPF stats allow tools monitor the usage of BPF on the server.
The monitoring tools will turn sysctl kernel.bpf_stats_enabled
on and off for few seconds to sample average cost of the programs.
Aggregated data over hours and days will provide an insight into cost of BPF
and alarms can trigger in case given program suddenly gets more expensive.
The cost of two sched_clock() per program invocation adds ~20 nsec.
Fast BPF progs (like selftests/bpf/progs/test_pkt_access.c) will slow down
from ~10 nsec to ~30 nsec.
static_key minimizes the cost of the stats collection.
There is no measurable difference before/after this patch
with kernel.bpf_stats_enabled=0
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In bpf/syscall.c, bpf_map_get_fd_by_id() use bpf_map_inc_not_zero()
to increase the refcount, both map->refcnt and map->usercnt. Then, if
bpf_map_new_fd() fails, should handle map->usercnt too.
Fixes: bd5f5f4ecb ("bpf: Add BPF_MAP_GET_FD_BY_ID")
Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.
The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.
However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.
Signed-off-by: David S. Miller <davem@davemloft.net>
trie_delete_elem() was deleting an entry even though it was not matching
if the prefixlen was correct. This patch adds a check on matchlen.
Reproducer:
$ sudo bpftool map create /sys/fs/bpf/mylpm type lpm_trie key 8 value 1 entries 128 name mylpm flags 1
$ sudo bpftool map update pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 aa bb cc dd value hex 01
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
key: 10 00 00 00 aa bb cc dd value: 01
Found 1 element
$ sudo bpftool map delete pinned /sys/fs/bpf/mylpm key hex 10 00 00 00 ff ff ff ff
$ echo $?
0
$ sudo bpftool map dump pinned /sys/fs/bpf/mylpm
Found 0 elements
A similar reproducer is added in the selftests.
Without the patch:
$ sudo ./tools/testing/selftests/bpf/test_lpm_map
test_lpm_map: test_lpm_map.c:485: test_lpm_delete: Assertion `bpf_map_delete_elem(map_fd, key) == -1 && errno == ENOENT' failed.
Aborted
With the patch: test_lpm_map runs without errors.
Fixes: e454cf5958 ("bpf: Implement map_delete_elem for BPF_MAP_TYPE_LPM_TRIE")
Cc: Craig Gallek <kraig@google.com>
Signed-off-by: Alban Crequy <alban@kinvolk.io>
Acked-by: Craig Gallek <kraig@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2019-02-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) numerous libbpf API improvements, from Andrii, Andrey, Yonghong.
2) test all bpf progs in alu32 mode, from Jiong.
3) skb->sk access and bpf_sk_fullsock(), bpf_tcp_sock() helpers, from Martin.
4) support for IP encap in lwt bpf progs, from Peter.
5) remove XDP_QUERY_XSK_UMEM dead code, from Jan.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently bpf_offload_dev does not have any priv pointer, forcing
the drivers to work backwards from the netdev in program metadata.
This is not great given programs are conceptually associated with
the offload device, and it means one or two unnecessary deferences.
Add a priv pointer to bpf_offload_dev.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds a helper function BPF_FUNC_tcp_sock and it
is currently available for cg_skb and sched_(cls|act):
struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk);
int cg_skb_foo(struct __sk_buff *skb) {
struct bpf_tcp_sock *tp;
struct bpf_sock *sk;
__u32 snd_cwnd;
sk = skb->sk;
if (!sk)
return 1;
tp = bpf_tcp_sock(sk);
if (!tp)
return 1;
snd_cwnd = tp->snd_cwnd;
/* ... */
return 1;
}
A 'struct bpf_tcp_sock' is also added to the uapi bpf.h to provide
read-only access. bpf_tcp_sock has all the existing tcp_sock's fields
that has already been exposed by the bpf_sock_ops.
i.e. no new tcp_sock's fields are exposed in bpf.h.
This helper returns a pointer to the tcp_sock. If it is not a tcp_sock
or it cannot be traced back to a tcp_sock by sk_to_full_sk(), it
returns NULL. Hence, the caller needs to check for NULL before
accessing it.
The current use case is to expose members from tcp_sock
to allow a cg_skb_bpf_prog to provide per cgroup traffic
policing/shaping.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In kernel, it is common to check "skb->sk && sk_fullsock(skb->sk)"
before accessing the fields in sock. For example, in __netdev_pick_tx:
static u16 __netdev_pick_tx(struct net_device *dev, struct sk_buff *skb,
struct net_device *sb_dev)
{
/* ... */
struct sock *sk = skb->sk;
if (queue_index != new_index && sk &&
sk_fullsock(sk) &&
rcu_access_pointer(sk->sk_dst_cache))
sk_tx_queue_set(sk, new_index);
/* ... */
return queue_index;
}
This patch adds a "struct bpf_sock *sk" pointer to the "struct __sk_buff"
where a few of the convert_ctx_access() in filter.c has already been
accessing the skb->sk sock_common's fields,
e.g. sock_ops_convert_ctx_access().
"__sk_buff->sk" is a PTR_TO_SOCK_COMMON_OR_NULL in the verifier.
Some of the fileds in "bpf_sock" will not be directly
accessible through the "__sk_buff->sk" pointer. It is limited
by the new "bpf_sock_common_is_valid_access()".
e.g. The existing "type", "protocol", "mark" and "priority" in bpf_sock
are not allowed.
The newly added "struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk)"
can be used to get a sk with all accessible fields in "bpf_sock".
This helper is added to both cg_skb and sched_(cls|act).
int cg_skb_foo(struct __sk_buff *skb) {
struct bpf_sock *sk;
sk = skb->sk;
if (!sk)
return 1;
sk = bpf_sk_fullsock(sk);
if (!sk)
return 1;
if (sk->family != AF_INET6 || sk->protocol != IPPROTO_TCP)
return 1;
/* some_traffic_shaping(); */
return 1;
}
(1) The sk is read only
(2) There is no new "struct bpf_sock_common" introduced.
(3) Future kernel sock's members could be added to bpf_sock only
instead of repeatedly adding at multiple places like currently
in bpf_sock_ops_md, bpf_sock_addr_md, sk_reuseport_md...etc.
(4) After "sk = skb->sk", the reg holding sk is in type
PTR_TO_SOCK_COMMON_OR_NULL.
(5) After bpf_sk_fullsock(), the return type will be in type
PTR_TO_SOCKET_OR_NULL which is the same as the return type of
bpf_sk_lookup_xxx().
However, bpf_sk_fullsock() does not take refcnt. The
acquire_reference_state() is only depending on the return type now.
To avoid it, a new is_acquire_function() is checked before calling
acquire_reference_state().
(6) The WARN_ON in "release_reference_state()" is no longer an
internal verifier bug.
When reg->id is not found in state->refs[], it means the
bpf_prog does something wrong like
"bpf_sk_release(bpf_sk_fullsock(skb->sk))" where reference has
never been acquired by calling "bpf_sk_fullsock(skb->sk)".
A -EINVAL and a verbose are done instead of WARN_ON. A test is
added to the test_verifier in a later patch.
Since the WARN_ON in "release_reference_state()" is no longer
needed, "__release_reference_state()" is folded into
"release_reference_state()" also.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
An ipvlan bug fix in 'net' conflicted with the abstraction away
of the IPV6 specific support in 'net-next'.
Similarly, a bug fix for mlx5 in 'net' conflicted with the flow
action conversion in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce BPF_F_LOCK flag for map_lookup and map_update syscall commands
and for map_update() helper function.
In all these cases take a lock of existing element (which was provided
in BTF description) before copying (in or out) the rest of map value.
Implementation details that are part of uapi:
Array:
The array map takes the element lock for lookup/update.
Hash:
hash map also takes the lock for lookup/update and tries to avoid the bucket lock.
If old element exists it takes the element lock and updates the element in place.
If element doesn't exist it allocates new one and inserts into hash table
while holding the bucket lock.
In rare case the hashmap has to take both the bucket lock and the element lock
to update old value in place.
Cgroup local storage:
It is similar to array. update in place and lookup are done with lock taken.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Introduce 'struct bpf_spin_lock' and bpf_spin_lock/unlock() helpers to let
bpf program serialize access to other variables.
Example:
struct hash_elem {
int cnt;
struct bpf_spin_lock lock;
};
struct hash_elem * val = bpf_map_lookup_elem(&hash_map, &key);
if (val) {
bpf_spin_lock(&val->lock);
val->cnt++;
bpf_spin_unlock(&val->lock);
}
Restrictions and safety checks:
- bpf_spin_lock is only allowed inside HASH and ARRAY maps.
- BTF description of the map is mandatory for safety analysis.
- bpf program can take one bpf_spin_lock at a time, since two or more can
cause dead locks.
- only one 'struct bpf_spin_lock' is allowed per map element.
It drastically simplifies implementation yet allows bpf program to use
any number of bpf_spin_locks.
- when bpf_spin_lock is taken the calls (either bpf2bpf or helpers) are not allowed.
- bpf program must bpf_spin_unlock() before return.
- bpf program can access 'struct bpf_spin_lock' only via
bpf_spin_lock()/bpf_spin_unlock() helpers.
- load/store into 'struct bpf_spin_lock lock;' field is not allowed.
- to use bpf_spin_lock() helper the BTF description of map value must be
a struct and have 'struct bpf_spin_lock anyname;' field at the top level.
Nested lock inside another struct is not allowed.
- syscall map_lookup doesn't copy bpf_spin_lock field to user space.
- syscall map_update and program map_update do not update bpf_spin_lock field.
- bpf_spin_lock cannot be on the stack or inside networking packet.
bpf_spin_lock can only be inside HASH or ARRAY map value.
- bpf_spin_lock is available to root only and to all program types.
- bpf_spin_lock is not allowed in inner maps of map-in-map.
- ld_abs is not allowed inside spin_lock-ed region.
- tracing progs and socket filter progs cannot use bpf_spin_lock due to
insufficient preemption checks
Implementation details:
- cgroup-bpf class of programs can nest with xdp/tc programs.
Hence bpf_spin_lock is equivalent to spin_lock_irqsave.
Other solutions to avoid nested bpf_spin_lock are possible.
Like making sure that all networking progs run with softirq disabled.
spin_lock_irqsave is the simplest and doesn't add overhead to the
programs that don't use it.
- arch_spinlock_t is used when its implemented as queued_spin_lock
- archs can force their own arch_spinlock_t
- on architectures where queued_spin_lock is not available and
sizeof(arch_spinlock_t) != sizeof(__u32) trivial lock is used.
- presence of bpf_spin_lock inside map value could have been indicated via
extra flag during map_create, but specifying it via BTF is cleaner.
It provides introspection for map key/value and reduces user mistakes.
Next steps:
- allow bpf_spin_lock in other map types (like cgroup local storage)
- introduce BPF_F_LOCK flag for bpf_map_update() syscall and helper
to request kernel to grab bpf_spin_lock before rewriting the value.
That will serialize access to map elements.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The map_lookup_elem used to not acquiring spinlock
in order to optimize the reader.
It was true until commit 557c0c6e7d ("bpf: convert stackmap to pre-allocation")
The syscall's map_lookup_elem(stackmap) calls bpf_stackmap_copy().
bpf_stackmap_copy() may find the elem no longer needed after the copy is done.
If that is the case, pcpu_freelist_push() saves this elem for reuse later.
This push requires a spinlock.
If a tracing bpf_prog got run in the middle of the syscall's
map_lookup_elem(stackmap) and this tracing bpf_prog is calling
bpf_get_stackid(stackmap) which also requires the same pcpu_freelist's
spinlock, it may end up with a dead lock situation as reported by
Eric Dumazet in https://patchwork.ozlabs.org/patch/1030266/
The situation is the same as the syscall's map_update_elem() which
needs to acquire the pcpu_freelist's spinlock and could race
with tracing bpf_prog. Hence, this patch fixes it by protecting
bpf_stackmap_copy() with this_cpu_inc(bpf_prog_active)
to prevent tracing bpf_prog from running.
A later syscall's map_lookup_elem commit f1a2e44a3a ("bpf: add queue and stack maps")
also acquires a spinlock and races with tracing bpf_prog similarly.
Hence, this patch is forward looking and protects the majority
of the map lookups. bpf_map_offload_lookup_elem() is the exception
since it is for network bpf_prog only (i.e. never called by tracing
bpf_prog).
Fixes: 557c0c6e7d ("bpf: convert stackmap to pre-allocation")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Disabled preemption is necessary for proper access to per-cpu maps
from BPF programs.
But the sender side of socket filters didn't have preemption disabled:
unix_dgram_sendmsg->sk_filter->sk_filter_trim_cap->bpf_prog_run_save_cb->BPF_PROG_RUN
and a combination of af_packet with tun device didn't disable either:
tpacket_snd->packet_direct_xmit->packet_pick_tx_queue->ndo_select_queue->
tun_select_queue->tun_ebpf_select_queue->bpf_prog_run_clear_cb->BPF_PROG_RUN
Disable preemption before executing BPF programs (both classic and extended).
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Building with W=1 reveals some bitrot:
CC kernel/bpf/cgroup.o
kernel/bpf/cgroup.c:238: warning: Function parameter or member 'flags' not described in '__cgroup_bpf_attach'
kernel/bpf/cgroup.c:367: warning: Function parameter or member 'unused_flags' not described in '__cgroup_bpf_detach'
Add a kerneldoc line for 'flags'.
Fixing the warning for 'unused_flags' is best approached by
removing the unused parameter on the function call.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Over the years, the function signature has changed, but the
kerneldoc block hasn't.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Current implementation does not allow typedef func_proto.
But it is actually allowed.
-bash-4.4$ cat t.c
typedef int (f) (int);
f *g;
-bash-4.4$ clang -O2 -g -c -target bpf t.c -Xclang -target-feature -Xclang +dwarfris
-bash-4.4$ pahole -JV t.o
File t.o:
[1] PTR (anon) type_id=2
[2] TYPEDEF f type_id=3
[3] FUNC_PROTO (anon) return=4 args=(4 (anon))
[4] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED
-bash-4.4$
This patch related btf verifier to allow such (typedef func_proto)
patterns.
Fixes: 2667a2626f ("bpf: btf: Add BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2019-01-29
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Teach verifier dead code removal, this also allows for optimizing /
removing conditional branches around dead code and to shrink the
resulting image. Code store constrained architectures like nfp would
have hard time doing this at JIT level, from Jakub.
2) Add JMP32 instructions to BPF ISA in order to allow for optimizing
code generation for 32-bit sub-registers. Evaluation shows that this
can result in code reduction of ~5-20% compared to 64 bit-only code
generation. Also add implementation for most JITs, from Jiong.
3) Add support for __int128 types in BTF which is also needed for
vmlinux's BTF conversion to work, from Yonghong.
4) Add a new command to bpftool in order to dump a list of BPF-related
parameters from the system or for a specific network device e.g. in
terms of available prog/map types or helper functions, from Quentin.
5) Add AF_XDP sock_diag interface for querying sockets from user
space which provides information about the RX/TX/fill/completion
rings, umem, memory usage etc, from Björn.
6) Add skb context access for skb_shared_info->gso_segs field, from Eric.
7) Add support for testing flow dissector BPF programs by extending
existing BPF_PROG_TEST_RUN infrastructure, from Stanislav.
8) Split BPF kselftest's test_verifier into various subgroups of tests
in order better deal with merge conflicts in this area, from Jakub.
9) Add support for queue/stack manipulations in bpftool, from Stanislav.
10) Document BTF, from Yonghong.
11) Dump supported ELF section names in libbpf on program load
failure, from Taeung.
12) Silence a false positive compiler warning in verifier's BTF
handling, from Peter.
13) Fix help string in bpftool's feature probing, from Prashant.
14) Remove duplicate includes in BPF kselftests, from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds JIT blinds support for JMP32.
Like BPF_JMP_REG/IMM, JMP32 version are needed for building raw bpf insn.
They are added to both include/linux/filter.h and
tools/include/linux/filter.h.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch implements interpreting new JMP32 instructions.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch teaches disassembler about JMP32. There are two places to
update:
- Class 0x6 now used by BPF_JMP32, not "unused".
- BPF_JMP32 need to show comparison operands properly.
The disassemble format is to add an extra "(32)" before the operands if
it is a sub-register. A better disassemble format for both JMP32 and
ALU32 just show the register prefix as "w" instead of "r", this is the
format using by LLVM assembler.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch teach verifier about the new BPF_JMP32 instruction class.
Verifier need to treat it similar as the existing BPF_JMP class.
A BPF_JMP32 insn needs to go through all checks that have been done on
BPF_JMP.
Also, verifier is doing runtime optimizations based on the extra info
conditional jump instruction could offer, especially when the comparison is
between constant and register that the value range of the register could be
improved based on the comparison results. These code are updated
accordingly.
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current min/max code does both signed and unsigned comparisons against
the input argument "val" which is "u64" and there is explicit type casting
when the comparison is signed.
As we will need slightly more complexer type casting when JMP32 introduced,
it is better to host the signed type casting. This makes the code more
clean with ignorable runtime overhead.
Also, code for J*GE/GT/LT/LE and JEQ/JNE are very similar, this patch
combine them.
The main purpose for this refactor is to make sure the min/max code will
still be readable and with minimum code duplication after JMP32 introduced.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Let offload JITs know when instructions are replaced and optimized
out, so they can update their state appropriately. The optimizations
are best effort, if JIT returns an error from any callback verifier
will stop notifying it as state may now be out of sync, but the
verifier continues making progress.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The communication between the verifier and advanced JITs is based
on instruction indexes. We have to keep them stable throughout
the optimizations otherwise referring to a particular instruction
gets messy quickly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Unconditional branches by 0 instructions are basically noops
but they can result from earlier optimizations, e.g. a conditional
jumps which would never be taken or a conditional jump around
dead code.
Remove those branches.
v0.2:
- s/opt_remove_dead_branches/opt_remove_nops/ (Jiong).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of overwriting dead code with jmp -1 instructions
remove it completely for root. Adjust verifier state and
line info appropriately.
v2:
- adjust func_info (Alexei);
- make sure first instruction retains line info (Alexei).
v4: (Yonghong)
- remove unnecessary if (!insn to remove) checks;
- always keep last line info if first live instruction lacks one.
v5: (Martin Lau)
- improve and clarify comments.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Loading programs with dead code becomes more and more
common, as people begin to patch constants at load time.
Turn conditional jumps to unconditional ones, to avoid
potential branch misprediction penalty.
This optimization is enabled for privileged users only.
For branches which just fall through we could just mark
them as not seen and have dead code removal take care of
them, but that seems less clean.
v0.2:
- don't call capable(CAP_SYS_ADMIN) twice (Jiong).
v3:
- fix GCC warning;
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In preparation for code removal change parameters to branch
and call adjustment functions to be more universal. The
current parameters assume we are patching a single instruction
with a longer set.
A diagram may help reading the change, this is for the patch
single case, patching instruction 1 with a replacement of 4:
____
0 |____|
1 |____| <-- pos ^
2 | | <-- end old ^ |
3 | | | delta | len
4 |____| | | (patch region)
5 | | <-- end new v v
6 |____|
end_old = pos + 1
end_new = pos + delta + 1
If we are before the patch region - curr variable and the target
are fully in old coordinates (hence comparing against end_old).
If we are after the region curr is in new coordinates (hence
the comparison to end_new) but target is in mixed coordinates,
so we just check if it falls before end_new, and if so it needs
the adjustment.
Note that we will not fix up branches which land in removed region
in case of removal, which should be okay, as we are only going to
remove dead code.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For better performance analysis of BPF programs, this patch introduces
PERF_RECORD_BPF_EVENT, a new perf_event_type that exposes BPF program
load/unload information to user space.
Each BPF program may contain up to BPF_MAX_SUBPROGS (256) sub programs.
The following example shows kernel symbols for a BPF program with 7 sub
programs:
ffffffffa0257cf9 t bpf_prog_b07ccb89267cf242_F
ffffffffa02592e1 t bpf_prog_2dcecc18072623fc_F
ffffffffa025b0e9 t bpf_prog_bb7a405ebaec5d5c_F
ffffffffa025dd2c t bpf_prog_a7540d4a39ec1fc7_F
ffffffffa025fcca t bpf_prog_05762d4ade0e3737_F
ffffffffa026108f t bpf_prog_db4bd11e35df90d4_F
ffffffffa0263f00 t bpf_prog_89d64e4abf0f0126_F
ffffffffa0257cf9 t bpf_prog_ae31629322c4b018__dummy_tracepoi
When a bpf program is loaded, PERF_RECORD_KSYMBOL is generated for each
of these sub programs. Therefore, PERF_RECORD_BPF_EVENT is not needed
for simple profiling.
For annotation, user space need to listen to PERF_RECORD_BPF_EVENT and
gather more information about these (sub) programs via sys_bpf.
Signed-off-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradeaed.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: netdev@vger.kernel.org
Link: http://lkml.kernel.org/r/20190117161521.1341602-4-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a plan to build the kernel with -Wimplicit-fallthrough
and this place in the code produced a warnings (W=1).
This commit removes the following warning:
kernel/bpf/cgroup.c:719:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Initially in commit 69b693f0ae ("bpf: btf: Introduce BPF Type Format
(BTF)") the function 'btf_name_offset_valid' was introduced as static
function it was later on changed to a non-static one, and then finally
in commit 23127b33ec ("bpf: Create a new btf_name_by_offset() for
non type name use case") the function prototype was removed.
Revert back to original implementation and make the function static.
Remove warning triggered with W=1:
kernel/bpf/btf.c:470:6: warning: no previous prototype for 'btf_name_offset_valid' [-Wmissing-prototypes]
Fixes: 23127b33ec ("bpf: Create a new btf_name_by_offset() for non type name use case")
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset,
make sure that build_id field is empty. Since we are using percpu
free list, there is a possibility that we might reuse some previous
bpf_stack_build_id with non-zero build_id.
Fixes: 615755a77b ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Build-id length is not fixed to 20, it can be (`man ld` /--build-id):
* 128-bit (uuid)
* 160-bit (sha1)
* any length specified in ld --build-id=0xhexstring
To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids,
assume that build-id is somewhere in the range of 1 .. 20.
Set the remaining bytes to zero.
v2:
* don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)",
we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter
this 'if' condition
Fixes: 615755a77b ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
An older GCC compiler complains:
kernel/bpf/verifier.c: In function 'bpf_check':
kernel/bpf/verifier.c:4***:13: error: 'prev_offset' may be used uninitialized
in this function [-Werror=maybe-uninitialized]
} else if (krecord[i].insn_offset <= prev_offset) {
^
kernel/bpf/verifier.c:4***:38: note: 'prev_offset' was declared here
u32 i, nfuncs, urec_size, min_size, prev_offset;
Although the compiler is wrong here, the patch makes sure
that prev_offset is always initialized, just to silence the warning.
v2: fix a spelling error in the commit message.
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, btf only supports up to 64-bit integer.
On the other hand, 128bit support for gcc and clang
has existed for a long time. For example, both gcc 4.8
and llvm 3.7 supports types "__int128" and
"unsigned __int128" for virtually all 64bit architectures
including bpf.
The requirement for __int128 support comes from two areas:
. bpf program may use __int128. For example, some bcc tools
(https://github.com/iovisor/bcc/tree/master/tools),
mostly tcp v6 related, tcpstates.py, tcpaccept.py, etc.,
are using __int128 to represent the ipv6 addresses.
. linux itself is using __int128 types. Hence supporting
__int128 type in BTF is required for vmlinux BTF,
which will be used by "compile once and run everywhere"
and other projects.
For 128bit integer, instead of base-10, hex numbers are pretty
printed out as large decimal number is hard to decipher, e.g.,
for ipv6 addresses.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Commit 9d5f9f701b ("bpf: btf: fix struct/union/fwd types
with kind_flag") introduced kind_flag and used bitfield_size
in the btf_member to directly pretty print member values.
The commit contained a bug where the incorrect parameters could be
passed to function btf_bitfield_seq_show(). The bits_offset
parameter in the function expects a value less than 8.
Instead, the member offset in the structure is passed.
The below is btf_bitfield_seq_show() func signature:
void btf_bitfield_seq_show(void *data, u8 bits_offset,
u8 nr_bits, struct seq_file *m)
both bits_offset and nr_bits are u8 type. If the bitfield
member offset is greater than 256, incorrect value will
be printed.
This patch fixed the issue by calculating correct proper
data offset and bits_offset similar to non kind_flag case.
Fixes: 9d5f9f701b ("bpf: btf: fix struct/union/fwd types with kind_flag")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
As Naresh reported, test_stacktrace_build_id() causes panic on i386 and
arm32 systems. This is caused by page_address() returns NULL in certain
cases.
This patch fixes this error by using kmap_atomic/kunmap_atomic instead
of page_address.
Fixes: 615755a77b (" bpf: extend stackmap to save binary_build_id+offset instead of address")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
While 979d63d50c ("bpf: prevent out of bounds speculation on pointer
arithmetic") took care of rejecting alu op on pointer when e.g. pointer
came from two different map values with different map properties such as
value size, Jann reported that a case was not covered yet when a given
alu op is used in both "ptr_reg += reg" and "numeric_reg += reg" from
different branches where we would incorrectly try to sanitize based
on the pointer's limit. Catch this corner case and reject the program
instead.
Fixes: 979d63d50c ("bpf: prevent out of bounds speculation on pointer arithmetic")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jann reported that the original commit back in b2157399cc
("bpf: prevent out-of-bounds speculation") was not sufficient
to stop CPU from speculating out of bounds memory access:
While b2157399cc only focussed on masking array map access
for unprivileged users for tail calls and data access such
that the user provided index gets sanitized from BPF program
and syscall side, there is still a more generic form affected
from BPF programs that applies to most maps that hold user
data in relation to dynamic map access when dealing with
unknown scalars or "slow" known scalars as access offset, for
example:
- Load a map value pointer into R6
- Load an index into R7
- Do a slow computation (e.g. with a memory dependency) that
loads a limit into R8 (e.g. load the limit from a map for
high latency, then mask it to make the verifier happy)
- Exit if R7 >= R8 (mispredicted branch)
- Load R0 = R6[R7]
- Load R0 = R6[R0]
For unknown scalars there are two options in the BPF verifier
where we could derive knowledge from in order to guarantee
safe access to the memory: i) While </>/<=/>= variants won't
allow to derive any lower or upper bounds from the unknown
scalar where it would be safe to add it to the map value
pointer, it is possible through ==/!= test however. ii) another
option is to transform the unknown scalar into a known scalar,
for example, through ALU ops combination such as R &= <imm>
followed by R |= <imm> or any similar combination where the
original information from the unknown scalar would be destroyed
entirely leaving R with a constant. The initial slow load still
precedes the latter ALU ops on that register, so the CPU
executes speculatively from that point. Once we have the known
scalar, any compare operation would work then. A third option
only involving registers with known scalars could be crafted
as described in [0] where a CPU port (e.g. Slow Int unit)
would be filled with many dependent computations such that
the subsequent condition depending on its outcome has to wait
for evaluation on its execution port and thereby executing
speculatively if the speculated code can be scheduled on a
different execution port, or any other form of mistraining
as described in [1], for example. Given this is not limited
to only unknown scalars, not only map but also stack access
is affected since both is accessible for unprivileged users
and could potentially be used for out of bounds access under
speculation.
In order to prevent any of these cases, the verifier is now
sanitizing pointer arithmetic on the offset such that any
out of bounds speculation would be masked in a way where the
pointer arithmetic result in the destination register will
stay unchanged, meaning offset masked into zero similar as
in array_index_nospec() case. With regards to implementation,
there are three options that were considered: i) new insn
for sanitation, ii) push/pop insn and sanitation as inlined
BPF, iii) reuse of ax register and sanitation as inlined BPF.
Option i) has the downside that we end up using from reserved
bits in the opcode space, but also that we would require
each JIT to emit masking as native arch opcodes meaning
mitigation would have slow adoption till everyone implements
it eventually which is counter-productive. Option ii) and iii)
have both in common that a temporary register is needed in
order to implement the sanitation as inlined BPF since we
are not allowed to modify the source register. While a push /
pop insn in ii) would be useful to have in any case, it
requires once again that every JIT needs to implement it
first. While possible, amount of changes needed would also
be unsuitable for a -stable patch. Therefore, the path which
has fewer changes, less BPF instructions for the mitigation
and does not require anything to be changed in the JITs is
option iii) which this work is pursuing. The ax register is
already mapped to a register in all JITs (modulo arm32 where
it's mapped to stack as various other BPF registers there)
and used in constant blinding for JITs-only so far. It can
be reused for verifier rewrites under certain constraints.
The interpreter's tmp "register" has therefore been remapped
into extending the register set with hidden ax register and
reusing that for a number of instructions that needed the
prior temporary variable internally (e.g. div, mod). This
allows for zero increase in stack space usage in the interpreter,
and enables (restricted) generic use in rewrites otherwise as
long as such a patchlet does not make use of these instructions.
The sanitation mask is dynamic and relative to the offset the
map value or stack pointer currently holds.
There are various cases that need to be taken under consideration
for the masking, e.g. such operation could look as follows:
ptr += val or val += ptr or ptr -= val. Thus, the value to be
sanitized could reside either in source or in destination
register, and the limit is different depending on whether
the ALU op is addition or subtraction and depending on the
current known and bounded offset. The limit is derived as
follows: limit := max_value_size - (smin_value + off). For
subtraction: limit := umax_value + off. This holds because
we do not allow any pointer arithmetic that would
temporarily go out of bounds or would have an unknown
value with mixed signed bounds where it is unclear at
verification time whether the actual runtime value would
be either negative or positive. For example, we have a
derived map pointer value with constant offset and bounded
one, so limit based on smin_value works because the verifier
requires that statically analyzed arithmetic on the pointer
must be in bounds, and thus it checks if resulting
smin_value + off and umax_value + off is still within map
value bounds at time of arithmetic in addition to time of
access. Similarly, for the case of stack access we derive
the limit as follows: MAX_BPF_STACK + off for subtraction
and -off for the case of addition where off := ptr_reg->off +
ptr_reg->var_off.value. Subtraction is a special case for
the masking which can be in form of ptr += -val, ptr -= -val,
or ptr -= val. In the first two cases where we know that
the value is negative, we need to temporarily negate the
value in order to do the sanitation on a positive value
where we later swap the ALU op, and restore original source
register if the value was in source.
The sanitation of pointer arithmetic alone is still not fully
sufficient as is, since a scenario like the following could
happen ...
PTR += 0x1000 (e.g. K-based imm)
PTR -= BIG_NUMBER_WITH_SLOW_COMPARISON
PTR += 0x1000
PTR -= BIG_NUMBER_WITH_SLOW_COMPARISON
[...]
... which under speculation could end up as ...
PTR += 0x1000
PTR -= 0 [ truncated by mitigation ]
PTR += 0x1000
PTR -= 0 [ truncated by mitigation ]
[...]
... and therefore still access out of bounds. To prevent such
case, the verifier is also analyzing safety for potential out
of bounds access under speculative execution. Meaning, it is
also simulating pointer access under truncation. We therefore
"branch off" and push the current verification state after the
ALU operation with known 0 to the verification stack for later
analysis. Given the current path analysis succeeded it is
likely that the one under speculation can be pruned. In any
case, it is also subject to existing complexity limits and
therefore anything beyond this point will be rejected. In
terms of pruning, it needs to be ensured that the verification
state from speculative execution simulation must never prune
a non-speculative execution path, therefore, we mark verifier
state accordingly at the time of push_stack(). If verifier
detects out of bounds access under speculative execution from
one of the possible paths that includes a truncation, it will
reject such program.
Given we mask every reg-based pointer arithmetic for
unprivileged programs, we've been looking into how it could
affect real-world programs in terms of size increase. As the
majority of programs are targeted for privileged-only use
case, we've unconditionally enabled masking (with its alu
restrictions on top of it) for privileged programs for the
sake of testing in order to check i) whether they get rejected
in its current form, and ii) by how much the number of
instructions and size will increase. We've tested this by
using Katran, Cilium and test_l4lb from the kernel selftests.
For Katran we've evaluated balancer_kern.o, Cilium bpf_lxc.o
and an older test object bpf_lxc_opt_-DUNKNOWN.o and l4lb
we've used test_l4lb.o as well as test_l4lb_noinline.o. We
found that none of the programs got rejected by the verifier
with this change, and that impact is rather minimal to none.
balancer_kern.o had 13,904 bytes (1,738 insns) xlated and
7,797 bytes JITed before and after the change. Most complex
program in bpf_lxc.o had 30,544 bytes (3,817 insns) xlated
and 18,538 bytes JITed before and after and none of the other
tail call programs in bpf_lxc.o had any changes either. For
the older bpf_lxc_opt_-DUNKNOWN.o object we found a small
increase from 20,616 bytes (2,576 insns) and 12,536 bytes JITed
before to 20,664 bytes (2,582 insns) and 12,558 bytes JITed
after the change. Other programs from that object file had
similar small increase. Both test_l4lb.o had no change and
remained at 6,544 bytes (817 insns) xlated and 3,401 bytes
JITed and for test_l4lb_noinline.o constant at 5,080 bytes
(634 insns) xlated and 3,313 bytes JITed. This can be explained
in that LLVM typically optimizes stack based pointer arithmetic
by using K-based operations and that use of dynamic map access
is not overly frequent. However, in future we may decide to
optimize the algorithm further under known guarantees from
branch and value speculation. Latter seems also unclear in
terms of prediction heuristics that today's CPUs apply as well
as whether there could be collisions in e.g. the predictor's
Value History/Pattern Table for triggering out of bounds access,
thus masking is performed unconditionally at this point but could
be subject to relaxation later on. We were generally also
brainstorming various other approaches for mitigation, but the
blocker was always lack of available registers at runtime and/or
overhead for runtime tracking of limits belonging to a specific
pointer. Thus, we found this to be minimally intrusive under
given constraints.
With that in place, a simple example with sanitized access on
unprivileged load at post-verification time looks as follows:
# bpftool prog dump xlated id 282
[...]
28: (79) r1 = *(u64 *)(r7 +0)
29: (79) r2 = *(u64 *)(r7 +8)
30: (57) r1 &= 15
31: (79) r3 = *(u64 *)(r0 +4608)
32: (57) r3 &= 1
33: (47) r3 |= 1
34: (2d) if r2 > r3 goto pc+19
35: (b4) (u32) r11 = (u32) 20479 |
36: (1f) r11 -= r2 | Dynamic sanitation for pointer
37: (4f) r11 |= r2 | arithmetic with registers
38: (87) r11 = -r11 | containing bounded or known
39: (c7) r11 s>>= 63 | scalars in order to prevent
40: (5f) r11 &= r2 | out of bounds speculation.
41: (0f) r4 += r11 |
42: (71) r4 = *(u8 *)(r4 +0)
43: (6f) r4 <<= r1
[...]
For the case where the scalar sits in the destination register
as opposed to the source register, the following code is emitted
for the above example:
[...]
16: (b4) (u32) r11 = (u32) 20479
17: (1f) r11 -= r2
18: (4f) r11 |= r2
19: (87) r11 = -r11
20: (c7) r11 s>>= 63
21: (5f) r2 &= r11
22: (0f) r2 += r0
23: (61) r0 = *(u32 *)(r2 +0)
[...]
JIT blinding example with non-conflicting use of r10:
[...]
d5: je 0x0000000000000106 _
d7: mov 0x0(%rax),%edi |
da: mov $0xf153246,%r10d | Index load from map value and
e0: xor $0xf153259,%r10 | (const blinded) mask with 0x1f.
e7: and %r10,%rdi |_
ea: mov $0x2f,%r10d |
f0: sub %rdi,%r10 | Sanitized addition. Both use r10
f3: or %rdi,%r10 | but do not interfere with each
f6: neg %r10 | other. (Neither do these instructions
f9: sar $0x3f,%r10 | interfere with the use of ax as temp
fd: and %r10,%rdi | in interpreter.)
100: add %rax,%rdi |_
103: mov 0x0(%rdi),%eax
[...]
Tested that it fixes Jann's reproducer, and also checked that test_verifier
and test_progs suite with interpreter, JIT and JIT with hardening enabled
on x86-64 and arm64 runs successfully.
[0] Speculose: Analyzing the Security Implications of Speculative
Execution in CPUs, Giorgi Maisuradze and Christian Rossow,
https://arxiv.org/pdf/1801.04084.pdf
[1] A Systematic Evaluation of Transient Execution Attacks and
Defenses, Claudio Canella, Jo Van Bulck, Michael Schwarz,
Moritz Lipp, Benjamin von Berg, Philipp Ortner, Frank Piessens,
Dmitry Evtyushkin, Daniel Gruss,
https://arxiv.org/pdf/1811.05441.pdf
Fixes: b2157399cc ("bpf: prevent out-of-bounds speculation")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In check_map_access() we probe actual bounds through __check_map_access()
with offset of reg->smin_value + off for lower bound and offset of
reg->umax_value + off for the upper bound. However, even though the
reg->smin_value could have a negative value, the final result of the
sum with off could be positive when pointer arithmetic with known and
unknown scalars is combined. In this case we reject the program with
an error such as "R<x> min value is negative, either use unsigned index
or do a if (index >=0) check." even though the access itself would be
fine. Therefore extend the check to probe whether the actual resulting
reg->smin_value + off is less than zero.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For unknown scalars of mixed signed bounds, meaning their smin_value is
negative and their smax_value is positive, we need to reject arithmetic
with pointer to map value. For unprivileged the goal is to mask every
map pointer arithmetic and this cannot reliably be done when it is
unknown at verification time whether the scalar value is negative or
positive. Given this is a corner case, the likelihood of breaking should
be very small.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Restrict stack pointer arithmetic for unprivileged users in that
arithmetic itself must not go out of bounds as opposed to the actual
access later on. Therefore after each adjust_ptr_min_max_vals() with
a stack pointer as a destination we simulate a check_stack_access()
of 1 byte on the destination and once that fails the program is
rejected for unprivileged program loads. This is analog to map
value pointer arithmetic and needed for masking later on.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Restrict map value pointer arithmetic for unprivileged users in that
arithmetic itself must not go out of bounds as opposed to the actual
access later on. Therefore after each adjust_ptr_min_max_vals() with a
map value pointer as a destination it will simulate a check_map_access()
of 1 byte on the destination and once that fails the program is rejected
for unprivileged program loads. We use this later on for masking any
pointer arithmetic with the remainder of the map value space. The
likelihood of breaking any existing real-world unprivileged eBPF
program is very small for this corner case.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Right now we are using BPF ax register in JIT for constant blinding as
well as in interpreter as temporary variable. Verifier will not be able
to use it simply because its use will get overridden from the former in
bpf_jit_blind_insn(). However, it can be made to work in that blinding
will be skipped if there is prior use in either source or destination
register on the instruction. Taking constraints of ax into account, the
verifier is then open to use it in rewrites under some constraints. Note,
ax register already has mappings in every eBPF JIT.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This change moves the on-stack 64 bit tmp variable in ___bpf_prog_run()
into the hidden ax register. The latter is currently only used in JITs
for constant blinding as a temporary scratch register, meaning the BPF
interpreter will never see the use of ax. Therefore it is safe to use
it for the cases where tmp has been used earlier. This is needed to later
on allow restricted hidden use of ax in both interpreter and JITs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Move prev_insn_idx and insn_idx from the do_check() function into
the verifier environment, so they can be read inside the various
helper functions for handling the instructions. It's easier to put
this into the environment rather than changing all call-sites only
to pass it along. insn_idx is useful in particular since this later
on allows to hold state in env->insn_aux_data[env->insn_idx].
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-21
The following pull-request contains BPF updates for your *net-next* tree.
There is a merge conflict in test_verifier.c. Result looks as follows:
[...]
},
{
"calls: cross frame pruning",
.insns = {
[...]
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.errstr_unpriv = "function calls to other bpf functions are allowed for root only",
.result_unpriv = REJECT,
.errstr = "!read_ok",
.result = REJECT,
},
{
"jset: functional",
.insns = {
[...]
{
"jset: unknown const compare not taken",
.insns = {
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
BPF_FUNC_get_prandom_u32),
BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1),
BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0),
BPF_EXIT_INSN(),
},
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.errstr_unpriv = "!read_ok",
.result_unpriv = REJECT,
.errstr = "!read_ok",
.result = REJECT,
},
[...]
{
"jset: range",
.insns = {
[...]
},
.prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
.result_unpriv = ACCEPT,
.result = ACCEPT,
},
The main changes are:
1) Various BTF related improvements in order to get line info
working. Meaning, verifier will now annotate the corresponding
BPF C code to the error log, from Martin and Yonghong.
2) Implement support for raw BPF tracepoints in modules, from Matt.
3) Add several improvements to verifier state logic, namely speeding
up stacksafe check, optimizations for stack state equivalence
test and safety checks for liveness analysis, from Alexei.
4) Teach verifier to make use of BPF_JSET instruction, add several
test cases to kselftests and remove nfp specific JSET optimization
now that verifier has awareness, from Jakub.
5) Improve BPF verifier's slot_type marking logic in order to
allow more stack slot sharing, from Jiong.
6) Add sk_msg->size member for context access and add set of fixes
and improvements to make sock_map with kTLS usable with openssl
based applications, from John.
7) Several cleanups and documentation updates in bpftool as well as
auto-mount of tracefs for "bpftool prog tracelog" command,
from Quentin.
8) Include sub-program tags from now on in bpf_prog_info in order to
have a reliable way for user space to get all tags of the program
e.g. needed for kallsyms correlation, from Song.
9) Add BTF annotations for cgroup_local_storage BPF maps and
implement bpf fs pretty print support, from Roman.
10) Fix bpftool in order to allow for cross-compilation, from Ivan.
11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order
to be compatible with libbfd and allow for Debian packaging,
from Jakub.
12) Remove an obsolete prog->aux sanitation in dump and get rid of
version check for prog load, from Daniel.
13) Fix a memory leak in libbpf's line info handling, from Prashant.
14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info
does not get unaligned, from Jesper.
15) Fix test_progs kselftest to work with older compilers which are less
smart in optimizing (and thus throwing build error), from Stanislav.
16) Cleanup and simplify AF_XDP socket teardown, from Björn.
17) Fix sk lookup in BPF kselftest's test_sock_addr with regards
to netns_id argument, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The frame_size passed to build_skb must be aligned, else it is
possible that the embedded struct skb_shared_info gets unaligned.
For correctness make sure that xdpf->headroom in included in the
alignment. No upstream drivers can hit this, as all XDP drivers provide
an aligned headroom. This was discovered when playing with implementing
XDP support for mvneta, which have a 2 bytes DSA header, and this
Marvell ARM64 platform didn't like doing atomic operations on an
unaligned skb_shinfo(skb)->dataref addresses.
Fixes: 1c601d829a ("bpf: cpumap xdp_buff to skb conversion and allocation")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Lots of conflicts, by happily all cases of overlapping
changes, parallel adds, things of that nature.
Thanks to Stephen Rothwell, Saeed Mahameed, and others
for their guidance in these resolutions.
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder the calls to check_max_stack_depth() and sanitize_dead_code()
to separate functions which can rewrite instructions from pure checks.
No functional changes.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Some JITs (nfp) try to optimize code on their own. It could make
sense in case of BPF_JSET instruction which is currently not interpreted
by the verifier, meaning for instance that dead could would not be
detected if it was under BPF_JSET branch.
Teach the verifier basics of BPF_JSET, JIT optimizations will be
removed shortly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch rejects a line_info if the bpf insn code referred by
line_info.insn_off is 0. F.e. a broken userspace tool might generate
a line_info.insn_off that points to the second 8 bytes of a BPF_LD_IMM64.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current btf internal verbose logger logs fwd type as
[2] FWD A type_id=0
where A is the type name.
Commit 9d5f9f701b ("bpf: btf: fix struct/union/fwd types
with kind_flag") introduced kind_flag which can be used
to distinguish whether a forward type is a struct or
union.
Also, "type_id=0" does not carry any meaningful
information for fwd type as btf_type.type = 0 is simply
enforced during btf verification and is not used
anywhere else.
This commit changed the log to
[2] FWD A struct
if kind_flag = 0, or
[2] FWD A union
if kind_flag = 1.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Verifier is supposed to support sharing stack slot allocated to ptr with
SCALAR_VALUE for privileged program. However this doesn't happen for some
cases.
The reason is verifier is not clearing slot_type STACK_SPILL for all bytes,
it only clears part of them, while verifier is using:
slot_type[0] == STACK_SPILL
as a convention to check one slot is ptr type.
So, the consequence of partial clearing slot_type is verifier could treat a
partially overridden ptr slot, which should now be a SCALAR_VALUE slot,
still as ptr slot, and rejects some valid programs.
Before this patch, test_xdp_noinline.o under bpf selftests, bpf_lxc.o and
bpf_netdev.o under Cilium bpf repo, when built with -mattr=+alu32 are
rejected due to this issue. After this patch, they all accepted.
There is no processed insn number change before and after this patch on
Cilium bpf programs.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Distributions build drivers as modules, including network and filesystem
drivers which export numerous tracepoints. This enables
bpf(BPF_RAW_TRACEPOINT_OPEN) to attach to those tracepoints.
Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 970289fc0a83 ("bpf: add bpffs pretty print for cgroup
local storage maps") added bpffs pretty print for cgroup
local storage maps. The commit worked for struct without kind_flag
set.
This patch refactored and made pretty print also work
with kind_flag set for the struct.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch fixed two issues with BTF. One is related to
struct/union bitfield encoding and the other is related to
forward type.
Issue #1 and solution:
======================
Current btf encoding of bitfield follows what pahole generates.
For each bitfield, pahole will duplicate the type chain and
put the bitfield size at the final int or enum type.
Since the BTF enum type cannot encode bit size,
pahole workarounds the issue by generating
an int type whenever the enum bit size is not 32.
For example,
-bash-4.4$ cat t.c
typedef int ___int;
enum A { A1, A2, A3 };
struct t {
int a[5];
___int b:4;
volatile enum A c:4;
} g;
-bash-4.4$ gcc -c -O2 -g t.c
The current kernel supports the following BTF encoding:
$ pahole -JV t.o
[1] TYPEDEF ___int type_id=2
[2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED
[3] ENUM A size=4 vlen=3
A1 val=0
A2 val=1
A3 val=2
[4] STRUCT t size=24 vlen=3
a type_id=5 bits_offset=0
b type_id=9 bits_offset=160
c type_id=11 bits_offset=164
[5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5
[6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none)
[7] VOLATILE (anon) type_id=3
[8] INT int size=1 bit_offset=0 nr_bits=4 encoding=(none)
[9] TYPEDEF ___int type_id=8
[10] INT (anon) size=1 bit_offset=0 nr_bits=4 encoding=SIGNED
[11] VOLATILE (anon) type_id=10
Two issues are in the above:
. by changing enum type to int, we lost the original
type information and this will not be ideal later
when we try to convert BTF to a header file.
. the type duplication for bitfields will cause
BTF bloat. Duplicated types cannot be deduplicated
later if the bitfield size is different.
To fix this issue, this patch implemented a compatible
change for BTF struct type encoding:
. the bit 31 of struct_type->info, previously reserved,
now is used to indicate whether bitfield_size is
encoded in btf_member or not.
. if bit 31 of struct_type->info is set,
btf_member->offset will encode like:
bit 0 - 23: bit offset
bit 24 - 31: bitfield size
if bit 31 is not set, the old behavior is preserved:
bit 0 - 31: bit offset
So if the struct contains a bit field, the maximum bit offset
will be reduced to (2^24 - 1) instead of MAX_UINT. The maximum
bitfield size will be 256 which is enough for today as maximum
bitfield in compiler can be 128 where int128 type is supported.
This kernel patch intends to support the new BTF encoding:
$ pahole -JV t.o
[1] TYPEDEF ___int type_id=2
[2] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED
[3] ENUM A size=4 vlen=3
A1 val=0
A2 val=1
A3 val=2
[4] STRUCT t kind_flag=1 size=24 vlen=3
a type_id=5 bitfield_size=0 bits_offset=0
b type_id=1 bitfield_size=4 bits_offset=160
c type_id=7 bitfield_size=4 bits_offset=164
[5] ARRAY (anon) type_id=2 index_type_id=2 nr_elems=5
[6] INT sizetype size=8 bit_offset=0 nr_bits=64 encoding=(none)
[7] VOLATILE (anon) type_id=3
Issue #2 and solution:
======================
Current forward type in BTF does not specify whether the original
type is struct or union. This will not work for type pretty print
and BTF-to-header-file conversion as struct/union must be specified.
$ cat tt.c
struct t;
union u;
int foo(struct t *t, union u *u) { return 0; }
$ gcc -c -g -O2 tt.c
$ pahole -JV tt.o
[1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED
[2] FWD t type_id=0
[3] PTR (anon) type_id=2
[4] FWD u type_id=0
[5] PTR (anon) type_id=4
To fix this issue, similar to issue #1, type->info bit 31
is used. If the bit is set, it is union type. Otherwise, it is
a struct type.
$ pahole -JV tt.o
[1] INT int size=4 bit_offset=0 nr_bits=32 encoding=SIGNED
[2] FWD t kind_flag=0 type_id=0
[3] PTR (anon) kind_flag=0 type_id=2
[4] FWD u kind_flag=1 type_id=0
[5] PTR (anon) kind_flag=0 type_id=4
Pahole/LLVM change:
===================
The new kind_flag functionality has been implemented in pahole
and llvm:
https://github.com/yonghong-song/pahole/tree/bitfieldhttps://github.com/yonghong-song/llvm/tree/bitfield
Note that pahole hasn't implemented func/func_proto kind
and .BTF.ext. So to print function signature with bpftool,
the llvm compiler should be used.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Refactor function btf_int_bits_seq_show() by creating
function btf_bitfield_seq_show() which has no dependence
on btf and btf_type. The function btf_bitfield_seq_show()
will be in later patch to directly dump bitfield member values.
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Existing libraries and tracing frameworks work around this kernel
version check by automatically deriving the kernel version from
uname(3) or similar such that the user does not need to do it
manually; these workarounds also make the version check useless
at the same time.
Moreover, most other BPF tracing types enabling bpf_probe_read()-like
functionality have /not/ adapted this check, and in general these
days it is well understood anyway that all the tracing programs are
not stable with regards to future kernels as kernel internal data
structures are subject to change from release to release.
Back at last netconf we discussed [0] and agreed to remove this
check from bpf_prog_load() and instead document it here in the uapi
header that there is no such guarantee for stable API for these
programs.
[0] http://vger.kernel.org/netconf2018_files/DanielBorkmann_netconf2018.pdf
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce REG_LIVE_DONE to check the liveness propagation
and prepare the states for merging.
See algorithm description in clean_live_states().
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
"if (old->allocated_stack > cur->allocated_stack)" check is too conservative.
In some cases explored stack could have allocated more space,
but that stack space was not live.
The test case improves from 19 to 15 processed insns
and improvement on real programs is significant as well:
before after
bpf_lb-DLB_L3.o 1940 1831
bpf_lb-DLB_L4.o 3089 3029
bpf_lb-DUNKNOWN.o 1065 1064
bpf_lxc-DDROP_ALL.o 28052 26309
bpf_lxc-DUNKNOWN.o 35487 33517
bpf_netdev.o 10864 9713
bpf_overlay.o 6643 6184
bpf_lcx_jit.o 38437 37335
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Don't check the same stack liveness condition 8 times.
once is enough.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds bpf_line_info during the verifier's verbose.
It can give error context for debug purpose.
~~~~~~~~~~
Here is the verbose log for backedge:
while (a) {
a += bpf_get_smp_processor_id();
bpf_trace_printk(fmt, sizeof(fmt), a);
}
~> bpftool prog load ./test_loop.o /sys/fs/bpf/test_loop type tracepoint
13: while (a) {
3: a += bpf_get_smp_processor_id();
back-edge from insn 13 to 3
~~~~~~~~~~
Here is the verbose log for invalid pkt access:
Modification to test_xdp_noinline.c:
data = (void *)(long)xdp->data;
data_end = (void *)(long)xdp->data_end;
/*
if (data + 4 > data_end)
return XDP_DROP;
*/
*(u32 *)data = dst->dst;
~> bpftool prog load ./test_xdp_noinline.o /sys/fs/bpf/test_xdp_noinline type xdp
; data = (void *)(long)xdp->data;
224: (79) r2 = *(u64 *)(r10 -112)
225: (61) r2 = *(u32 *)(r2 +0)
; *(u32 *)data = dst->dst;
226: (63) *(u32 *)(r2 +0) = r1
invalid access to packet, off=0 size=4, R2(id=0,off=0,r=0)
R2 offset is outside of the packet
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current btf_name_by_offset() is returning "(anon)" type name for
the offset == 0 case and "(invalid-name-offset)" for the out-of-bound
offset case.
It fits well for the internal BTF verbose log purpose which
is focusing on type. For example,
offset == 0 => "(anon)" => anonymous type/name.
Returning non-NULL for the bad offset case is needed
during the BTF verification process because the BTF verifier may
complain about another field first before discovering the name_off
is invalid.
However, it may not be ideal for the newer use case which does not
necessary mean type name. For example, when logging line_info
in the BPF verifier in the next patch, it is better to log an
empty src line instead of logging "(anon)".
The existing bpf_name_by_offset() is renamed to __bpf_name_by_offset()
and static to btf.c.
A new bpf_name_by_offset() is added for generic context usage. It
returns "\0" for name_off == 0 (note that btf->strings[0] is "\0")
and NULL for invalid offset. It allows the caller to decide
what is the best output in its context.
The new btf_name_by_offset() is overlapped with btf_name_offset_valid().
Hence, btf_name_offset_valid() is removed from btf.h to keep the btf.h API
minimal. The existing btf_name_offset_valid() usage in btf.c could also be
replaced later.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This logic is not needed anymore since we got rid of the verifier
rewrite that was using prog->aux address in f6069b9aa9 ("bpf:
fix redirect to map under tail calls").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently for liveness and state pruning the register parentage
chains don't include states of the callee. This makes some sense
as the callee can't access those registers. However, this means
that READs done after the callee returns will not propagate into
the states of the callee. Callee will then perform pruning
disregarding differences in caller state.
Example:
0: (85) call bpf_user_rnd_u32
1: (b7) r8 = 0
2: (55) if r0 != 0x0 goto pc+1
3: (b7) r8 = 1
4: (bf) r1 = r8
5: (85) call pc+4
6: (15) if r8 == 0x1 goto pc+1
7: (05) *(u64 *)(r9 - 8) = r3
8: (b7) r0 = 0
9: (95) exit
10: (15) if r1 == 0x0 goto pc+0
11: (95) exit
Here we acquire unknown state with call to get_random() [1]. Then
we store this random state in r8 (either 0 or 1) [1 - 3], and make
a call on line 5. Callee does nothing but a trivial conditional
jump (to create a pruning point). Upon return caller checks the
state of r8 and either performs an unsafe read or not.
Verifier will first explore the path with r8 == 1, creating a pruning
point at [11]. The parentage chain for r8 will include only callers
states so once verifier reaches [6] it will mark liveness only on states
in the caller, and not [11]. Now when verifier walks the paths with
r8 == 0 it will reach [11] and since REG_LIVE_READ on r8 was not
propagated there it will prune the walk entirely (stop walking
the entire program, not just the callee). Since [6] was never walked
with r8 == 0, [7] will be considered dead and replaced with "goto -1"
causing hang at runtime.
This patch weaves the callee's explored states onto the callers
parentage chain. Rough parentage for r8 would have looked like this
before:
[0] [1] [2] [3] [4] [5] [10] [11] [6] [7]
| | ,---|----. | | |
sl0: sl0: / sl0: \ sl0: sl0: sl0:
fr0: r8 <-- fr0: r8<+--fr0: r8 `fr0: r8 ,fr0: r8<-fr0: r8
\ fr1: r8 <- fr1: r8 /
\__________________/
after:
[0] [1] [2] [3] [4] [5] [10] [11] [6] [7]
| | | | | |
sl0: sl0: sl0: sl0: sl0: sl0:
fr0: r8 <-- fr0: r8 <- fr0: r8 <- fr0: r8 <-fr0: r8<-fr0: r8
fr1: r8 <- fr1: r8
Now the mark from instruction 6 will travel through callees states.
Note that we don't have to connect r0 because its overwritten by
callees state on return and r1 - r5 because those are not alive
any more once a call is made.
v2:
- don't connect the callees registers twice (Alexei: suggestion & code)
- add more details to the comment (Ed & Alexei)
v1: don't unnecessarily link caller saved regs (Jiong)
Fixes: f4d7e40a5b ("bpf: introduce function calls (verification)")
Reported-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jiong Wang <jiong.wang@netronome.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changes v2 -> v3:
1. remove check for bpf_dump_raw_ok().
Changes v1 -> v2:
1. Fix error path as Martin suggested.
This patch adds nr_prog_tags and prog_tags to bpf_prog_info. This is a
reliable way for user space to get tags of all sub programs. Before this
patch, user space need to find sub program tags via kallsyms.
This feature will be used in BPF introspection, where user space queries
information about BPF programs via sys_bpf.
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The func_info and line_info have the bpf insn offset but
they do not contain kernel address. They will still be useful
for the userspace tool to annotate the xlated insn.
This patch removes the bpf_dump_raw_ok() guard for the
func_info and line_info during bpf_prog_get_info_by_fd().
The guard stays for jited_line_info which contains the kernel
address.
Although this bpf_dump_raw_ok() guard behavior has started since
the earlier func_info patch series, I marked the Fixes tag to the
latest line_info patch series which contains both func_info and
line_info and this patch is fixing for both of them.
Fixes: c454a46b5e ("bpf: Add bpf_line_info support")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Implement bpffs pretty printing for cgroup local storage maps
(both shared and per-cpu).
Output example (captured for tools/testing/selftests/bpf/netcnt_prog.c):
Shared:
$ cat /sys/fs/bpf/map_2
# WARNING!! The output is for debug purpose only
# WARNING!! The output format will change
{4294968594,1}: {9999,1039896}
Per-cpu:
$ cat /sys/fs/bpf/map_1
# WARNING!! The output is for debug purpose only
# WARNING!! The output format will change
{4294968594,1}: {
cpu0: {0,0,0,0,0}
cpu1: {0,0,0,0,0}
cpu2: {1,104,0,0,0}
cpu3: {0,0,0,0,0}
}
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If key_type or value_type are of non-trivial data types
(e.g. structure or typedef), it's not possible to check them without
the additional information, which can't be obtained without a pointer
to the btf structure.
So, let's pass btf pointer to the map_check_btf() callbacks.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Michael and Sandipan report:
Commit ede95a63b5 introduced a bpf_jit_limit tuneable to limit BPF
JIT allocations. At compile time it defaults to PAGE_SIZE * 40000,
and is adjusted again at init time if MODULES_VADDR is defined.
For ppc64 kernels, MODULES_VADDR isn't defined, so we're stuck with
the compile-time default at boot-time, which is 0x9c400000 when
using 64K page size. This overflows the signed 32-bit bpf_jit_limit
value:
root@ubuntu:/tmp# cat /proc/sys/net/core/bpf_jit_limit
-1673527296
and can cause various unexpected failures throughout the network
stack. In one case `strace dhclient eth0` reported:
setsockopt(5, SOL_SOCKET, SO_ATTACH_FILTER, {len=11, filter=0x105dd27f8},
16) = -1 ENOTSUPP (Unknown error 524)
and similar failures can be seen with tools like tcpdump. This doesn't
always reproduce however, and I'm not sure why. The more consistent
failure I've seen is an Ubuntu 18.04 KVM guest booted on a POWER9
host would time out on systemd/netplan configuring a virtio-net NIC
with no noticeable errors in the logs.
Given this and also given that in near future some architectures like
arm64 will have a custom area for BPF JIT image allocations we should
get rid of the BPF_JIT_LIMIT_DEFAULT fallback / default entirely. For
4.21, we have an overridable bpf_jit_alloc_exec(), bpf_jit_free_exec()
so therefore add another overridable bpf_jit_alloc_exec_limit() helper
function which returns the possible size of the memory area for deriving
the default heuristic in bpf_jit_charge_init().
Like bpf_jit_alloc_exec() and bpf_jit_free_exec(), the new
bpf_jit_alloc_exec_limit() assumes that module_alloc() is the default
JIT memory provider, and therefore in case archs implement their custom
module_alloc() we use MODULES_{END,_VADDR} for limits and otherwise for
vmalloc_exec() cases like on ppc64 we use VMALLOC_{END,_START}.
Additionally, for archs supporting large page sizes, we should change
the sysctl to be handled as long to not run into sysctl restrictions
in future.
Fixes: ede95a63b5 ("bpf: add bpf_jit_limit knob to restrict unpriv allocations")
Reported-by: Sandipan Das <sandipan@linux.ibm.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-12-11
The following pull-request contains BPF updates for your *net-next* tree.
It has three minor merge conflicts, resolutions:
1) tools/testing/selftests/bpf/test_verifier.c
Take first chunk with alignment_prevented_execution.
2) net/core/filter.c
[...]
case bpf_ctx_range_ptr(struct __sk_buff, flow_keys):
case bpf_ctx_range(struct __sk_buff, wire_len):
return false;
[...]
3) include/uapi/linux/bpf.h
Take the second chunk for the two cases each.
The main changes are:
1) Add support for BPF line info via BTF and extend libbpf as well
as bpftool's program dump to annotate output with BPF C code to
facilitate debugging and introspection, from Martin.
2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter
and all JIT backends, from Jiong.
3) Improve BPF test coverage on archs with no efficient unaligned
access by adding an "any alignment" flag to the BPF program load
to forcefully disable verifier alignment checks, from David.
4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for
proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz.
5) Extend tc BPF programs to use a new __sk_buff field called wire_len
for more accurate accounting of packets going to wire, from Petar.
6) Improve bpftool to allow dumping the trace pipe from it and add
several improvements in bash completion and map/prog dump,
from Quentin.
7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for
kernel addresses and add a dedicated BPF JIT backend allocator,
from Ard.
8) Add a BPF helper function for IR remotes to report mouse movements,
from Sean.
9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info
member naming consistent with existing conventions, from Yonghong
and Song.
10) Misc cleanups and improvements in allowing to pass interface name
via cmdline for xdp1 BPF example, from Matteo.
11) Fix a potential segfault in BPF sample loader's kprobes handling,
from Daniel T.
12) Fix SPDX license in libbpf's README.rst, from Andrey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In uapi bpf.h, currently we have the following fields in
the struct bpf_prog_info:
__u32 func_info_cnt;
__u32 line_info_cnt;
__u32 jited_line_info_cnt;
The above field names "func_info_cnt" and "line_info_cnt"
also appear in union bpf_attr for program loading.
The original intention is to keep the names the same
between bpf_prog_info and bpf_attr
so it will imply what we returned to user space will be
the same as what the user space passed to the kernel.
Such a naming convention in bpf_prog_info is not consistent
with other fields like:
__u32 nr_jited_ksyms;
__u32 nr_jited_func_lens;
This patch made this adjustment so in bpf_prog_info
newly introduced *_info_cnt becomes nr_*_info.
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
info.nr_jited_ksyms and info.nr_jited_func_lens cannot be 0 in these two
statements, so we don't need to check them.
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, the destination register is marked as unknown for 32-bit
sub-register move (BPF_MOV | BPF_ALU) whenever the source register type is
SCALAR_VALUE.
This is too conservative that some valid cases will be rejected.
Especially, this may turn a constant scalar value into unknown value that
could break some assumptions of verifier.
For example, test_l4lb_noinline.c has the following C code:
struct real_definition *dst
1: if (!get_packet_dst(&dst, &pckt, vip_info, is_ipv6))
2: return TC_ACT_SHOT;
3:
4: if (dst->flags & F_IPV6) {
get_packet_dst is responsible for initializing "dst" into valid pointer and
return true (1), otherwise return false (0). The compiled instruction
sequence using alu32 will be:
412: (54) (u32) r7 &= (u32) 1
413: (bc) (u32) r0 = (u32) r7
414: (95) exit
insn 413, a BPF_MOV | BPF_ALU, however will turn r0 into unknown value even
r7 contains SCALAR_VALUE 1.
This causes trouble when verifier is walking the code path that hasn't
initialized "dst" inside get_packet_dst, for which case 0 is returned and
we would then expect verifier concluding line 1 in the above C code pass
the "if" check, therefore would skip fall through path starting at line 4.
Now, because r0 returned from callee has became unknown value, so verifier
won't skip analyzing path starting at line 4 and "dst->flags" requires
dereferencing the pointer "dst" which actually hasn't be initialized for
this path.
This patch relaxed the code marking sub-register move destination. For a
SCALAR_VALUE, it is safe to just copy the value from source then truncate
it into 32-bit.
A unit test also included to demonstrate this issue. This test will fail
before this patch.
This relaxation could let verifier skipping more paths for conditional
comparison against immediate. It also let verifier recording a more
accurate/strict value for one register at one state, if this state end up
with going through exit without rejection and it is used for state
comparison later, then it is possible an inaccurate/permissive value is
better. So the real impact on verifier processed insn number is complex.
But in all, without this fix, valid program could be rejected.
>From real benchmarking on kernel selftests and Cilium bpf tests, there is
no impact on processed instruction number when tests ares compiled with
default compilation options. There is slightly improvements when they are
compiled with -mattr=+alu32 after this patch.
Also, test_xdp_noinline/-mattr=+alu32 now passed verification. It is
rejected before this fix.
Insn processed before/after this patch:
default -mattr=+alu32
Kernel selftest
===
test_xdp.o 371/371 369/369
test_l4lb.o 6345/6345 5623/5623
test_xdp_noinline.o 2971/2971 rejected/2727
test_tcp_estates.o 429/429 430/430
Cilium bpf
===
bpf_lb-DLB_L3.o: 2085/2085 1685/1687
bpf_lb-DLB_L4.o: 2287/2287 1986/1982
bpf_lb-DUNKNOWN.o: 690/690 622/622
bpf_lxc.o: 95033/95033 N/A
bpf_netdev.o: 7245/7245 N/A
bpf_overlay.o: 2898/2898 3085/2947
NOTE:
- bpf_lxc.o and bpf_netdev.o compiled by -mattr=+alu32 are rejected by
verifier due to another issue inside verifier on supporting alu32
binary.
- Each cilium bpf program could generate several processed insn number,
above number is sum of them.
v1->v2:
- Restrict the change on SCALAR_VALUE.
- Update benchmark numbers on Cilium bpf tests.
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Several conflicts, seemingly all over the place.
I used Stephen Rothwell's sample resolutions for many of these, if not
just to double check my own work, so definitely the credit largely
goes to him.
The NFP conflict consisted of a bug fix (moving operations
past the rhashtable operation) while chaning the initial
argument in the function call in the moved code.
The net/dsa/master.c conflict had to do with a bug fix intermixing of
making dsa_master_set_mtu() static with the fixing of the tagging
attribute location.
cls_flower had a conflict because the dup reject fix from Or
overlapped with the addition of port range classifiction.
__set_phy_supported()'s conflict was relatively easy to resolve
because Andrew fixed it in both trees, so it was just a matter
of taking the net-next copy. Or at least I think it was :-)
Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup()
intermixed with changes on how the sdif and caller_net are calculated
in these code paths in net-next.
The remaining BPF conflicts were largely about the addition of the
__bpf_md_ptr stuff in 'net' overlapping with adjustments and additions
to the relevant data structure where the MD pointer macros are used.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds bpf_line_info support.
It accepts an array of bpf_line_info objects during BPF_PROG_LOAD.
The "line_info", "line_info_cnt" and "line_info_rec_size" are added
to the "union bpf_attr". The "line_info_rec_size" makes
bpf_line_info extensible in the future.
The new "check_btf_line()" ensures the userspace line_info is valid
for the kernel to use.
When the verifier is translating/patching the bpf_prog (through
"bpf_patch_insn_single()"), the line_infos' insn_off is also
adjusted by the newly added "bpf_adj_linfo()".
If the bpf_prog is jited, this patch also provides the jited addrs (in
aux->jited_linfo) for the corresponding line_info.insn_off.
"bpf_prog_fill_jited_linfo()" is added to fill the aux->jited_linfo.
It is currently called by the x86 jit. Other jits can also use
"bpf_prog_fill_jited_linfo()" and it will be done in the followup patches.
In the future, if it deemed necessary, a particular jit could also provide
its own "bpf_prog_fill_jited_linfo()" implementation.
A few "*line_info*" fields are added to the bpf_prog_info such
that the user can get the xlated line_info back (i.e. the line_info
with its insn_off reflecting the translated prog). The jited_line_info
is available if the prog is jited. It is an array of __u64.
If the prog is not jited, jited_line_info_cnt is 0.
The verifier's verbose log with line_info will be done in
a follow up patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch remove the rejection on BPF_ALU | BPF_ARSH as we have supported
them on interpreter and all JIT back-ends
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch implements interpreting BPF_ALU | BPF_ARSH. Do arithmetic right
shift on low 32-bit sub-register, and zero the high 32 bits.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The later patch will introduce "struct bpf_line_info" which
has member "line_off" and "file_off" referring back to the
string section in btf. The line_"off" and file_"off"
are more consistent to the naming convention in btf.h that
means "offset" (e.g. name_off in "struct btf_type").
The to-be-added "struct bpf_line_info" also has another
member, "insn_off" which is the same as the "insn_offset"
in "struct bpf_func_info". Hence, this patch renames "insn_offset"
to "insn_off" for "struct bpf_func_info".
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
1) When bpf_dump_raw_ok() == false and the kernel can provide >=1
func_info to the userspace, the current behavior is setting
the info.func_info_cnt to 0 instead of setting info.func_info
to 0.
It is different from the behavior in jited_func_lens/nr_jited_func_lens,
jited_ksyms/nr_jited_ksyms...etc.
This patch fixes it. (i.e. set func_info to 0 instead of
func_info_cnt to 0 when bpf_dump_raw_ok() == false).
2) When the userspace passed in info.func_info_cnt == 0, the kernel
will set the expected func_info size back to the
info.func_info_rec_size. It is a way for the userspace to learn
the kernel expected func_info_rec_size introduced in
commit 838e96904f ("bpf: Introduce bpf_func_info").
An exception is the kernel expected size is not set when
func_info is not available for a bpf_prog. This makes the
returned info.func_info_rec_size has different values
depending on the returned value of info.func_info_cnt.
This patch sets the kernel expected size to info.func_info_rec_size
independent of the info.func_info_cnt.
3) The current logic only rejects invalid func_info_rec_size if
func_info_cnt is non zero. This patch also rejects invalid
nonzero info.func_info_rec_size and not equal to the kernel
expected size.
4) Set info.btf_id as long as prog->aux->btf != NULL. That will
setup the later copy_to_user() codes look the same as others
which then easier to understand and maintain.
prog->aux->btf is not NULL only if prog->aux->func_info_cnt > 0.
Breaking up info.btf_id from prog->aux->func_info_cnt is needed
for the later line info patch anyway.
A similar change is made to bpf_get_prog_name().
Fixes: 838e96904f ("bpf: Introduce bpf_func_info")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
By default, BPF uses module_alloc() to allocate executable memory,
but this is not necessary on all arches and potentially undesirable
on some of them.
So break out the module_alloc() and module_memfree() calls into __weak
functions to allow them to be overridden in arch code.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
malicious bpf program may try to force the verifier to remember
a lot of distinct verifier states.
Put a limit to number of per-insn 'struct bpf_verifier_state'.
Note that hitting the limit doesn't reject the program.
It potentially makes the verifier do more steps to analyze the program.
It means that malicious programs will hit BPF_COMPLEXITY_LIMIT_INSNS sooner
instead of spending cpu time walking long link list.
The limit of BPF_COMPLEXITY_LIMIT_STATES==64 affects cilium progs
with slight increase in number of "steps" it takes to successfully verify
the programs:
before after
bpf_lb-DLB_L3.o 1940 1940
bpf_lb-DLB_L4.o 3089 3089
bpf_lb-DUNKNOWN.o 1065 1065
bpf_lxc-DDROP_ALL.o 28052 | 28162
bpf_lxc-DUNKNOWN.o 35487 | 35541
bpf_netdev.o 10864 10864
bpf_overlay.o 6643 6643
bpf_lcx_jit.o 38437 38437
But it also makes malicious program to be rejected in 0.4 seconds vs 6.5
Hence apply this limit to unprivileged programs only.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
pathological bpf programs may try to force verifier to explode in
the number of branch states:
20: (d5) if r1 s<= 0x24000028 goto pc+0
21: (b5) if r0 <= 0xe1fa20 goto pc+2
22: (d5) if r1 s<= 0x7e goto pc+0
23: (b5) if r0 <= 0xe880e000 goto pc+0
24: (c5) if r0 s< 0x2100ecf4 goto pc+0
25: (d5) if r1 s<= 0xe880e000 goto pc+1
26: (c5) if r0 s< 0xf4041810 goto pc+0
27: (d5) if r1 s<= 0x1e007e goto pc+0
28: (b5) if r0 <= 0xe86be000 goto pc+0
29: (07) r0 += 16614
30: (c5) if r0 s< 0x6d0020da goto pc+0
31: (35) if r0 >= 0x2100ecf4 goto pc+0
Teach verifier to recognize always taken and always not taken branches.
This analysis is already done for == and != comparison.
Expand it to all other branches.
It also helps real bpf programs to be verified faster:
before after
bpf_lb-DLB_L3.o 2003 1940
bpf_lb-DLB_L4.o 3173 3089
bpf_lb-DUNKNOWN.o 1080 1065
bpf_lxc-DDROP_ALL.o 29584 28052
bpf_lxc-DUNKNOWN.o 36916 35487
bpf_netdev.o 11188 10864
bpf_overlay.o 6679 6643
bpf_lcx_jit.o 39555 38437
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Malicious user space may try to force the verifier to use as much cpu
time and memory as possible. Hence check for pending signals
while verifying the program.
Note that suspend of sys_bpf(PROG_LOAD) syscall will lead to EAGAIN,
since the kernel has to release the resources used for program verification.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The aux->func_info and aux->btf are leaked in the error out cases
during bpf_prog_load(). This patch fixes it.
Fixes: ba64e7d852 ("bpf: btf: support proper non-jit func info")
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Often we want to write tests cases that check things like bad context
offset accesses. And one way to do this is to use an odd offset on,
for example, a 32-bit load.
This unfortunately triggers the alignment checks first on platforms
that do not set CONFIG_EFFICIENT_UNALIGNED_ACCESS. So the test
case see the alignment failure rather than what it was testing for.
It is often not completely possible to respect the original intention
of the test, or even test the same exact thing, while solving the
alignment issue.
Another option could have been to check the alignment after the
context and other validations are performed by the verifier, but
that is a non-trivial change to the verifier.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann says:
====================
bpf-next 2018-11-30
The following pull-request contains BPF updates for your *net-next* tree.
(Getting out bit earlier this time to pull in a dependency from bpf.)
The main changes are:
1) Add libbpf ABI versioning and document API naming conventions
as well as ABI versioning process, from Andrey.
2) Add a new sk_msg_pop_data() helper for sk_msg based BPF
programs that is used in conjunction with sk_msg_push_data()
for adding / removing meta data to the msg data, from John.
3) Optimize convert_bpf_ld_abs() for 0 offset and fix various
lib and testsuite build failures on 32 bit, from David.
4) Make BPF prog dump for !JIT identical to how we dump subprogs
when JIT is in use, from Yonghong.
5) Rename btf_get_from_id() to make it more conform with libbpf
API naming conventions, from Martin.
6) Add a missing BPF kselftest config item, from Naresh.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Trivial conflict in net/core/filter.c, a locally computed
'sdif' is now an argument to the function.
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch added name checking for the following types:
. BTF_KIND_PTR, BTF_KIND_ARRAY, BTF_KIND_VOLATILE,
BTF_KIND_CONST, BTF_KIND_RESTRICT:
the name must be null
. BTF_KIND_STRUCT, BTF_KIND_UNION: the struct/member name
is either null or a valid identifier
. BTF_KIND_ENUM: the enum type name is either null or a valid
identifier; the enumerator name must be a valid identifier.
. BTF_KIND_FWD: the name must be a valid identifier
. BTF_KIND_TYPEDEF: the name must be a valid identifier
For those places a valid name is required, the name must be
a valid C identifier. This can be relaxed later if we found
use cases for a different (non-C) frontend.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Function btf_name_valid_identifier() have been implemented in
bpf-next commit 2667a2626f ("bpf: btf: Add BTF_KIND_FUNC and
BTF_KIND_FUNC_PROTO"). Backport this function so later patch
can use it.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 838e96904f ("bpf: Introduce bpf_func_info")
added bpf func info support. The userspace is able
to get better ksym's for bpf programs with jit, and
is able to print out func prototypes.
For a program containing func-to-func calls, the existing
implementation returns user specified number of function
calls and BTF types if jit is enabled. If the jit is not
enabled, it only returns the type for the main function.
This is undesirable. Interpreter may still be used
and we should keep feature identical regardless of
whether jit is enabled or not.
This patch fixed this discrepancy.
Fixes: 838e96904f ("bpf: Introduce bpf_func_info")
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Make fetching of the BPF call address from ppc64 JIT generic. ppc64
was using a slightly different variant rather than through the insns'
imm field encoding as the target address would not fit into that space.
Therefore, the target subprog number was encoded into the insns' offset
and fetched through fp->aux->func[off]->bpf_func instead. Given there
are other JITs with this issue and the mechanism of fetching the address
is JIT-generic, move it into the core as a helper instead. On the JIT
side, we get information on whether the retrieved address is a fixed
one, that is, not changing through JIT passes, or a dynamic one. For
the former, JITs can optimize their imm emission because this doesn't
change jump offsets throughout JIT process.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is a spelling mistake in a btf_verifier_log_member message,
fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Building tags produces warning:
ctags: Warning: kernel/bpf/local_storage.c:10: null expansion of name pattern "\1"
Let's use the same fix as in commit 25528213fe ("tags: Fix DEFINE_PER_CPU
expansions"), even though it violates the usual code style.
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
At LPC 2018 in Vancouver, Vlad Dumitrescu mentioned that longest_prefix_match()
has a high cost [1].
One reason for that cost is a loop handling one byte at a time.
We can handle more bytes at a time, if enough attention is paid
to endianness.
I was able to remove ~55 % of longest_prefix_match() cpu costs.
[1] https://linuxplumbersconf.org/event/2/contributions/88/attachments/76/87/lpc-bpf-2018-shaping.pdf
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Dumitrescu <vladum@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch added interface to load a program with the following
additional information:
. prog_btf_fd
. func_info, func_info_rec_size and func_info_cnt
where func_info will provide function range and type_id
corresponding to each function.
The func_info_rec_size is introduced in the UAPI to specify
struct bpf_func_info size passed from user space. This
intends to make bpf_func_info structure growable in the future.
If the kernel gets a different bpf_func_info size from userspace,
it will try to handle user request with part of bpf_func_info
it can understand. In this patch, kernel can understand
struct bpf_func_info {
__u32 insn_offset;
__u32 type_id;
};
If user passed a bpf func_info record size of 16 bytes, the
kernel can still handle part of records with the above definition.
If verifier agrees with function range provided by the user,
the bpf_prog ksym for each function will use the func name
provided in the type_id, which is supposed to provide better
encoding as it is not limited by 16 bytes program name
limitation and this is better for bpf program which contains
multiple subprograms.
The bpf_prog_info interface is also extended to
return btf_id, func_info, func_info_rec_size and func_info_cnt
to userspace, so userspace can print out the function prototype
for each xlated function. The insn_offset in the returned
func_info corresponds to the insn offset for xlated functions.
With other jit related fields in bpf_prog_info, userspace can also
print out function prototypes for each jited function.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds BTF_KIND_FUNC and BTF_KIND_FUNC_PROTO
to support the function debug info.
BTF_KIND_FUNC_PROTO must not have a name (i.e. !t->name_off)
and it is followed by >= 0 'struct bpf_param' objects to
describe the function arguments.
The BTF_KIND_FUNC must have a valid name and it must
refer back to a BTF_KIND_FUNC_PROTO.
The above is the conclusion after the discussion between
Edward Cree, Alexei, Daniel, Yonghong and Martin.
By combining BTF_KIND_FUNC and BTF_LIND_FUNC_PROTO,
a complete function signature can be obtained. It will be
used in the later patches to learn the function signature of
a running bpf program.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch breaks up btf_type_is_void() into
btf_type_is_void() and btf_type_is_fwd().
It also adds btf_type_nosize() to better describe it is
testing a type has nosize info.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new flag BPF_F_ZERO_SEED, which forces a hash map
to initialize the seed to zero. This is useful when doing
performance analysis both on individual BPF programs, as
well as the kernel's hash table implementation.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When patching in a new sequence for the first insn of a subprog, the start
of that subprog does not change (it's the first insn of the sequence), so
adjust_subprog_starts should check start <= off (rather than < off).
Also added a test to test_verifier.c (it's essentially the syz reproducer).
Fixes: cc8b0b92a1 ("bpf: introduce function calls (function boundaries)")
Reported-by: syzbot+4fc427c7af994b0948be@syzkaller.appspotmail.com
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pointer offload is being null checked however the following statement
dereferences the potentially null pointer offload when assigning
offload->dev_state. Fix this by only assigning it if offload is not
null.
Detected by CoverityScan, CID#1475437 ("Dereference after null check")
Fixes: 00db12c3d1 ("bpf: call verifier_prep from its callback in struct bpf_offload_dev")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently BPF verifier allows narrow loads for a context field only with
offset zero. E.g. if there is a __u32 field then only the following
loads are permitted:
* off=0, size=1 (narrow);
* off=0, size=2 (narrow);
* off=0, size=4 (full).
On the other hand LLVM can generate a load with offset different than
zero that make sense from program logic point of view, but verifier
doesn't accept it.
E.g. tools/testing/selftests/bpf/sendmsg4_prog.c has code:
#define DST_IP4 0xC0A801FEU /* 192.168.1.254 */
...
if ((ctx->user_ip4 >> 24) == (bpf_htonl(DST_IP4) >> 24) &&
where ctx is struct bpf_sock_addr.
Some versions of LLVM can produce the following byte code for it:
8: 71 12 07 00 00 00 00 00 r2 = *(u8 *)(r1 + 7)
9: 67 02 00 00 18 00 00 00 r2 <<= 24
10: 18 03 00 00 00 00 00 fe 00 00 00 00 00 00 00 00 r3 = 4261412864 ll
12: 5d 32 07 00 00 00 00 00 if r2 != r3 goto +7 <LBB0_6>
where `*(u8 *)(r1 + 7)` means narrow load for ctx->user_ip4 with size=1
and offset=3 (7 - sizeof(ctx->user_family) = 3). This load is currently
rejected by verifier.
Verifier code that rejects such loads is in bpf_ctx_narrow_access_ok()
what means any is_valid_access implementation, that uses the function,
works this way, e.g. bpf_skb_is_valid_access() for __sk_buff or
sock_addr_is_valid_access() for bpf_sock_addr.
The patch makes such loads supported. Offset can be in [0; size_default)
but has to be multiple of load size. E.g. for __u32 field the following
loads are supported now:
* off=0, size=1 (narrow);
* off=1, size=1 (narrow);
* off=2, size=1 (narrow);
* off=3, size=1 (narrow);
* off=0, size=2 (narrow);
* off=2, size=2 (narrow);
* off=0, size=4 (full).
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kernel functions to prepare verifier and translate for offloaded
program retrieve "offload" from "prog", and "netdev" from "offload".
Then both "prog" and "netdev" are passed to the callbacks.
Simplify this by letting the drivers retrieve the net device themselves
from the offload object attached to prog - if they need it at all. There
is currently no need to pass the netdev as an argument to those
functions.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Function bpf_prog_offload_verifier_prep(), called from the kernel BPF
verifier to run a driver-specific callback for preparing for the
verification step for offloaded programs, takes a pointer to a struct
bpf_verifier_env object. However, no driver callback needs the whole
structure at this time: the two drivers supporting this, nfp and
netdevsim, only need a pointer to the struct bpf_prog instance held by
env.
Update the callback accordingly, on kernel side and in these two
drivers.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As part of the transition from ndo_bpf() to callbacks attached to struct
bpf_offload_dev for some of the eBPF offload operations, move the
functions related to program destruction to the struct and remove the
subcommand that was used to call them through the NDO.
Remove function __bpf_offload_ndo(), which is no longer used.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
As part of the transition from ndo_bpf() to callbacks attached to struct
bpf_offload_dev for some of the eBPF offload operations, move the
functions related to code translation to the struct and remove the
subcommand that was used to call them through the NDO.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a way similar to the change previously brought to the verify_insn
hook and to the finalize callback, switch to the newly added ops in
struct bpf_prog_offload for calling the functions used to prepare driver
verifiers.
Since the dev_ops pointer in struct bpf_prog_offload is no longer used
by any callback, we can now remove it from struct bpf_prog_offload.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a way similar to the change previously brought to the verify_insn
hook, switch to the newly added ops in struct bpf_prog_offload for
calling the functions used to perform final verification steps for
offloaded programs.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We intend to remove the dev_ops in struct bpf_prog_offload, and to only
keep the ops in struct bpf_offload_dev instead, which is accessible from
more locations for passing function pointers.
But dev_ops is used for calling the verify_insn hook. Switch to the
newly added ops in struct bpf_prog_offload instead.
To avoid table lookups for each eBPF instruction to verify, we remember
the offdev attached to a netdev and modify bpf_offload_find_netdev() to
avoid performing more than once a lookup for a given offload object.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For passing device functions for offloaded eBPF programs, there used to
be no place where to store the pointer without making the non-offloaded
programs pay a memory price.
As a consequence, three functions were called with ndo_bpf() through
specific commands. Now that we have struct bpf_offload_dev, and since
none of those operations rely on RTNL, we can turn these three commands
into hooks inside the struct bpf_prog_offload_ops, and pass them as part
of bpf_offload_dev_create().
This commit effectively passes a pointer to the struct to
bpf_offload_dev_create(). We temporarily have two struct
bpf_prog_offload_ops instances, one under offdev->ops and one under
offload->dev_ops. The next patches will make the transition towards the
former, so that offload->dev_ops can be removed, and callbacks relying
on ndo_bpf() added to offdev->ops as well.
While at it, rename "nfp_bpf_analyzer_ops" as "nfp_bpf_dev_ops" (and
similarly for netdevsim).
Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In check_packet_access, update max_pkt_offset after the offset has passed
__check_packet_access.
It should be safe to use u32 for max_pkt_offset as explained in code
comment.
Also, when there is tail call, the max_pkt_offset of the called program is
unknown, so conservatively set max_pkt_offset to MAX_PACKET_OFF for such
case.
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
While dbecd73884 ("bpf: get kernel symbol addresses via syscall")
zeroed info.nr_jited_ksyms in bpf_prog_get_info_by_fd() for queries
from unprivileged users, commit 815581c11c ("bpf: get JITed image
lengths of functions via syscall") forgot about doing so and therefore
returns the #elems of the user set up buffer which is incorrect. It
also needs to indicate a info.nr_jited_func_lens of zero.
Fixes: 815581c11c ("bpf: get JITed image lengths of functions via syscall")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, when there is no subprog (prog->aux->func_cnt == 0),
bpf_prog_info does not return any jited_ksyms or jited_func_lens. This
patch adds main program address (prog->bpf_func) and main program
length (prog->jited_len) to bpf_prog_info.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, jited_ksyms in bpf_prog_info shows page addresses of jited
bpf program. The main reason here is to not expose randomized start
address. However, this is not ideal for detailed profiling (find hot
instructions from stack traces). This patch replaces the page address
with real prog start address.
This change is OK because bpf_prog_get_info_by_fd() is only available
to root.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, /proc/kallsyms shows page address of jited bpf program. The
main reason here is to not expose randomized start address. However,
This is not ideal for detailed profiling (find hot instructions from
stack traces). This patch replaces the page address with real prog start
address.
This change is OK because these addresses are still protected by sysctl
kptr_restrict (see kallsyms_show_value()), and only programs loaded by
root are added to kallsyms (see bpf_prog_kallsyms_add()).
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
In the verifier there is no such semantics where registers with
PTR_TO_MAP_VALUE type have an id assigned to them. This is only
used in PTR_TO_MAP_VALUE_OR_NULL and later on nullified once the
test against NULL has been pattern matched and type transformed
into PTR_TO_MAP_VALUE.
Fixes: 3e6a4b3e02 ("bpf/verifier: introduce BPF_PTR_TO_MAP_VALUE")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ALU operations on pointers such as scalar_reg += map_value_ptr are
handled in adjust_ptr_min_max_vals(). Problem is however that map_ptr
and range in the register state share a union, so transferring state
through dst_reg->range = ptr_reg->range is just buggy as any new
map_ptr in the dst_reg is then truncated (or null) for subsequent
checks. Fix this by adding a raw member and use it for copying state
over to dst_reg.
Fixes: f1174f77b5 ("bpf/verifier: rework value tracking")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Rick reported that the BPF JIT could potentially fill the entire module
space with BPF programs from unprivileged users which would prevent later
attempts to load normal kernel modules or privileged BPF programs, for
example. If JIT was enabled but unsuccessful to generate the image, then
before commit 290af86629 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
we would always fall back to the BPF interpreter. Nowadays in the case
where the CONFIG_BPF_JIT_ALWAYS_ON could be set, then the load will abort
with a failure since the BPF interpreter was compiled out.
Add a global limit and enforce it for unprivileged users such that in case
of BPF interpreter compiled out we fail once the limit has been reached
or we fall back to BPF interpreter earlier w/o using module mem if latter
was compiled in. In a next step, fair share among unprivileged users can
be resolved in particular for the case where we would fail hard once limit
is reached.
Fixes: 290af86629 ("bpf: introduce BPF_JIT_ALWAYS_ON config")
Fixes: 0a14842f5a ("net: filter: Just In Time compiler for x86-64")
Co-Developed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jann Horn <jannh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Given this seems to be quite fragile and can easily slip through the
cracks, lets make direct packet write more robust by requiring that
future program types which allow for such write must provide a prologue
callback. In case of XDP and sk_msg it's noop, thus add a generic noop
handler there. The latter starts out with NULL data/data_end unconditionally
when sg pages are shared.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit f1a2e44a3a ("bpf: add queue and stack maps") added helpers
with ARG_PTR_TO_UNINIT_MAP_VALUE. Meaning, the helper is supposed to
fill the map value buffer with data instead of reading from it like
in other helpers such as map update. However, given the buffer is
allowed to be uninitialized (since we fill it in the helper anyway),
it also means that the helper is obliged to wipe the memory in case
of an error in order to not allow for leaking uninitialized memory.
Given pop/peek is both handled inside __{stack,queue}_map_get(),
lets wipe it there on error case, that is, empty stack/queue.
Fixes: f1a2e44a3a ("bpf: add queue and stack maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Mauricio Vasquez B<mauricio.vasquez@polito.it>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit f1a2e44a3a ("bpf: add queue and stack maps") probably just
copy-pasted .pkt_access for bpf_map_{pop,peek}_elem() helpers, but
this is buggy in this context since it would allow writes into cloned
skbs which is invalid. Therefore, disable .pkt_access for the two.
Fixes: f1a2e44a3a ("bpf: add queue and stack maps")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Mauricio Vasquez B<mauricio.vasquez@polito.it>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit b39b5f411d ("bpf: add cg_skb_is_valid_access for
BPF_PROG_TYPE_CGROUP_SKB") added direct packet access for skbs in
cg_skb program types, however allowed access type was not added to
the may_access_direct_pkt_data() helper. Therefore the latter always
returns false. This is not directly an issue, it just means writes
are unconditionally disabled (which is correct) but also reads.
Latter is relevant in this function when BPF helpers may read direct
packet data which is unconditionally disabled then. Fix it by properly
adding BPF_PROG_TYPE_CGROUP_SKB to may_access_direct_pkt_data().
Fixes: b39b5f411d ("bpf: add cg_skb_is_valid_access for BPF_PROG_TYPE_CGROUP_SKB")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit d58e468b11 ("flow_dissector: implements flow dissector BPF
hook") added direct packet access for skbs in may_access_direct_pkt_data()
function where this enables read and write access to the skb->data. This
is buggy because without a prologue generator such as bpf_unclone_prologue()
we would allow for writing into cloned skbs. Original intention might have
been to only allow read access where this is not needed (similar as the
flow_dissector_func_proto() indicates which enables only bpf_skb_load_bytes()
as well), therefore this patch fixes it to restrict to read-only.
Fixes: d58e468b11 ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: Petar Penkov <ppenkov@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Wenwen Wang reported:
In btf_parse(), the header of the user-space btf data 'btf_data'
is firstly parsed and verified through btf_parse_hdr().
In btf_parse_hdr(), the header is copied from user-space 'btf_data'
to kernel-space 'btf->hdr' and then verified. If no error happens
during the verification process, the whole data of 'btf_data',
including the header, is then copied to 'data' in btf_parse(). It
is obvious that the header is copied twice here. More importantly,
no check is enforced after the second copy to make sure the headers
obtained in these two copies are same. Given that 'btf_data' resides
in the user space, a malicious user can race to modify the header
between these two copies. By doing so, the user can inject
inconsistent data, which can cause undefined behavior of the
kernel and introduce potential security risk.
This issue is similar to the one fixed in commit 8af03d1ae2 ("bpf:
btf: Fix a missing check bug"). To fix it, this patch copies the user
'btf_data' *before* parsing / verifying the BTF header.
Fixes: 69b693f0ae ("bpf: btf: Introduce BPF Type Format (BTF)")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Co-developed-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The dev_map_notification() removes interface in devmap if
unregistering interface's ifindex is same.
But only checking ifindex is not enough because other netns can have
same ifindex. so that wrong interface selection could occurred.
Hence netdev pointer comparison code is added.
v2: compare netdev pointer instead of using net_eq() (Daniel Borkmann)
v1: Initial patch
Fixes: 2ddf71e23c ("net: add notifier hooks for devmap bpf map")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-10-21
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Implement two new kind of BPF maps, that is, queue and stack
map along with new peek, push and pop operations, from Mauricio.
2) Add support for MSG_PEEK flag when redirecting into an ingress
psock sk_msg queue, and add a new helper bpf_msg_push_data() for
insert data into the message, from John.
3) Allow for BPF programs of type BPF_PROG_TYPE_CGROUP_SKB to use
direct packet access for __skb_buff, from Song.
4) Use more lightweight barriers for walking perf ring buffer for
libbpf and perf tool as well. Also, various fixes and improvements
from verifier side, from Daniel.
5) Add per-symbol visibility for DSO in libbpf and hide by default
global symbols such as netlink related functions, from Andrey.
6) Two improvements to nfp's BPF offload to check vNIC capabilities
in case prog is shared with multiple vNICs and to protect against
mis-initializing atomic counters, from Jakub.
7) Fix for bpftool to use 4 context mode for the nfp disassembler,
also from Jakub.
8) Fix a return value comparison in test_libbpf.sh and add several
bpftool improvements in bash completion, documentation of bpf fs
restrictions and batch mode summary print, from Quentin.
9) Fix a file resource leak in BPF selftest's load_kallsyms()
helper, from Peng.
10) Fix an unused variable warning in map_lookup_and_delete_elem(),
from Alexei.
11) Fix bpf_skb_adjust_room() signature in BPF UAPI helper doc,
from Nicolas.
12) Add missing executables to .gitignore in BPF selftests, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend prior work from 09772d92cd ("bpf: avoid retpoline for
lookup/update/delete calls on maps") to also apply to the recently
added map helpers that perform push/pop/peek operations so that
the indirect call can be avoided.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
They PTR_TO_FLOW_KEYS is not used today to be passed into a helper
as memory, so it can be removed from check_helper_mem_access().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We should not enable xadd operation for flow key memory if not
needed there anyway. There is no such issue as described in the
commit f37a8cb84c ("bpf: reject stores into ctx via st and xadd")
since there's no context rewriter for flow keys today, but it
also shouldn't become part of the user facing behavior to allow
for it. After patch:
0: (79) r7 = *(u64 *)(r1 +144)
1: (b7) r3 = 4096
2: (db) lock *(u64 *)(r7 +0) += r3
BPF_XADD stores into R7 flow_keys is not allowed
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Using reg_type_str[insn->dst_reg] is incorrect since insn->dst_reg
contains the register number but not the actual register type. Add
a small reg_state() helper and use it to get to the type. Also fix
up the test_verifier test cases that have an incorrect errstr.
Fixes: 9d2be44a7f ("bpf: Reuse canonical string formatter for ctx errs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
BPF programs of BPF_PROG_TYPE_CGROUP_SKB need to access headers in the
skb. This patch enables direct access of skb for these programs.
Two helper functions bpf_compute_and_save_data_end() and
bpf_restore_data_end() are introduced. There are used in
__cgroup_bpf_run_filter_skb(), to compute proper data_end for the
BPF program, and restore original data afterwards.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The previous patch implemented a bpf queue/stack maps that
provided the peek/pop/push functions. There is not a direct
relationship between those functions and the current maps
syscalls, hence a new MAP_LOOKUP_AND_DELETE_ELEM syscall is added,
this is mapped to the pop operation in the queue/stack maps
and it is still to implement in other kind of maps.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Queue/stack maps implement a FIFO/LIFO data storage for ebpf programs.
These maps support peek, pop and push operations that are exposed to eBPF
programs through the new bpf_map[peek/pop/push] helpers. Those operations
are exposed to userspace applications through the already existing
syscalls in the following way:
BPF_MAP_LOOKUP_ELEM -> peek
BPF_MAP_LOOKUP_AND_DELETE_ELEM -> pop
BPF_MAP_UPDATE_ELEM -> push
Queue/stack maps are implemented using a buffer, tail and head indexes,
hence BPF_F_NO_PREALLOC is not supported.
As opposite to other maps, queue and stack do not use RCU for protecting
maps values, the bpf_map[peek/pop] have a ARG_PTR_TO_UNINIT_MAP_VALUE
argument that is a pointer to a memory zone where to save the value of a
map. Basically the same as ARG_PTR_TO_UNINIT_MEM, but the size has not
be passed as an extra argument.
Our main motivation for implementing queue/stack maps was to keep track
of a pool of elements, like network ports in a SNAT, however we forsee
other use cases, like for exampling saving last N kernel events in a map
and then analysing from userspace.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ARG_PTR_TO_UNINIT_MAP_VALUE argument is a pointer to a memory zone
used to save the value of a map. Basically the same as
ARG_PTR_TO_UNINIT_MEM, but the size has not be passed as an extra
argument.
This will be used in the following patch that implements some new
helpers that receive a pointer to be filled with a map value.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This commit adds the required logic to allow key being NULL
in case the key_size of the map is 0.
A new __bpf_copy_key function helper only copies the key from
userpsace when key_size != 0, otherwise it enforces that key must be
null.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the following patches queue and stack maps (FIFO and LIFO
datastructures) will be implemented. In order to avoid confusion and
a possible name clash rename stack_map_ops to stack_trace_map_ops
Signed-off-by: Mauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
net/sched/cls_api.c has overlapping changes to a call to
nlmsg_parse(), one (from 'net') added rtm_tca_policy instead of NULL
to the 5th argument, and another (from 'net-next') added cb->extack
instead of NULL to the 6th argument.
net/ipv4/ipmr_base.c is a case of a bug fix in 'net' being done to
code which moved (to mr_table_dump)) in 'net-next'. Thanks to David
Ahern for the heads up.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a generic sk_msg layer, and convert current sockmap and later
kTLS over to make use of it. While sk_buff handles network packet
representation from netdevice up to socket, sk_msg handles data
representation from application to socket layer.
This means that sk_msg framework spans across ULP users in the
kernel, and enables features such as introspection or filtering
of data with the help of BPF programs that operate on this data
structure.
Latter becomes in particular useful for kTLS where data encryption
is deferred into the kernel, and as such enabling the kernel to
perform L7 introspection and policy based on BPF for TLS connections
where the record is being encrypted after BPF has run and came to
a verdict. In order to get there, first step is to transform open
coding of scatter-gather list handling into a common core framework
that subsystems can use.
The code itself has been split and refactored into three bigger
pieces: i) the generic sk_msg API which deals with managing the
scatter gather ring, providing helpers for walking and mangling,
transferring application data from user space into it, and preparing
it for BPF pre/post-processing, ii) the plain sock map itself
where sockets can be attached to or detached from; these bits
are independent of i) which can now be used also without sock
map, and iii) the integration with plain TCP as one protocol
to be used for processing L7 application data (later this could
e.g. also be extended to other protocols like UDP). The semantics
are the same with the old sock map code and therefore no change
of user facing behavior or APIs. While pursuing this work it
also helped finding a number of bugs in the old sockmap code
that we've fixed already in earlier commits. The test_sockmap
kselftest suite passes through fine as well.
Joint work with John.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to prepare sockmap logic to be used in combination with kTLS
we need to detangle it from ULP, and further split it in later commits
into a generic API.
Joint work with John.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The map-in-map frequently serves as a mechanism for atomic
snapshotting of state that a BPF program might record. The current
implementation is dangerous to use in this way, however, since
userspace has no way of knowing when all programs that might have
retrieved the "old" value of the map may have completed.
This change ensures that map update operations on map-in-map map types
always wait for all references to the old map to drop before returning
to userspace.
Signed-off-by: Daniel Colascione <dancol@google.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The XSKMAP update and delete functions called synchronize_net(), which
can sleep. It is not allowed to sleep during an RCU read section.
Instead we need to make sure that the sock sk_destruct (xsk_destruct)
function is asynchronously called after an RCU grace period. Setting
the SOCK_RCU_FREE flag for XDP sockets takes care of this.
Fixes: fbfc504a24 ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
David S. Miller