Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
By default s_maxbytes is set to MAX_NON_LFS, which limits the usable
file size to 2GB, enforced by the vfs.
Commit b9b1f8d593 ("AFS: write support fixes") added support for the
64-bit fetch and store server operations, but did not change this value.
As a result, attempts to write past the 2G mark result in EFBIG errors:
$ dd if=/dev/zero of=foo bs=1M count=1 seek=2048
dd: error writing 'foo': File too large
Set s_maxbytes to MAX_LFS_FILESIZE.
Fixes: b9b1f8d593 ("AFS: write support fixes")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pass the server and volume break counts from before the status fetch
operation that queried the attributes of a file into afs_iget5_set() so
that the new vnode's break counters can be initialised appropriately.
This allows detection of a volume or server break that happened whilst we
were fetching the status or setting up the vnode.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Use RCU-based freeing for afs_cb_interest struct objects and use RCU on
vnode->cb_interest. Use that change to allow afs_check_validity() to use
read_seqbegin_or_lock() instead of read_seqlock_excl().
This also requires the caller of afs_check_validity() to hold the RCU read
lock across the call.
Signed-off-by: David Howells <dhowells@redhat.com>
Don't save callback version and type fields as the version is about the
format of the callback information and the type is relative to the
particular RPC call.
Signed-off-by: David Howells <dhowells@redhat.com>
When applying the status and callback in the response of an operation,
apply them in the same critical section so that there's no race between
checking the callback state and checking status-dependent state (such as
the data version).
Fix this by:
(1) Allocating a joint {status,callback} record (afs_status_cb) before
calling the RPC function for each vnode for which the RPC reply
contains a status or a status plus a callback. A flag is set in the
record to indicate if a callback was actually received.
(2) These records are passed into the RPC functions to be filled in. The
afs_decode_status() and yfs_decode_status() functions are removed and
the cb_lock is no longer taken.
(3) xdr_decode_AFSFetchStatus() and xdr_decode_YFSFetchStatus() no longer
update the vnode.
(4) xdr_decode_AFSCallBack() and xdr_decode_YFSCallBack() no longer update
the vnode.
(5) vnodes, expected data-version numbers and callback break counters
(cb_break) no longer need to be passed to the reply delivery
functions.
Note that, for the moment, the file locking functions still need
access to both the call and the vnode at the same time.
(6) afs_vnode_commit_status() is now given the cb_break value and the
expected data_version and the task of applying the status and the
callback to the vnode are now done here.
This is done under a single taking of vnode->cb_lock.
(7) afs_pages_written_back() is now called by afs_store_data() rather than
by the reply delivery function.
afs_pages_written_back() has been moved to before the call point and
is now given the first and last page numbers rather than a pointer to
the call.
(8) The indicator from YFS.RemoveFile2 as to whether the target file
actually got removed (status.abort_code == VNOVNODE) rather than
merely dropping a link is now checked in afs_unlink rather than in
xdr_decode_YFSFetchStatus().
Supplementary fixes:
(*) afs_cache_permit() now gets the caller_access mask from the
afs_status_cb object rather than picking it out of the vnode's status
record. afs_fetch_status() returns caller_access through its argument
list for this purpose also.
(*) afs_inode_init_from_status() now uses a write lock on cb_lock rather
than a read lock and now sets the callback inside the same critical
section.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
Make certain RPC operations non-interruptible, including:
(*) Set attributes
(*) Store data
We don't want to get interrupted during a flush on close, flush on
unlock, writeback or an inode update, leaving us in a state where we
still need to do the writeback or update.
(*) Extend lock
(*) Release lock
We don't want to get lock extension interrupted as the file locks on
the server are time-limited. Interruption during lock release is less
of an issue since the lock is time-limited, but it's better to
complete the release to avoid a several-minute wait to recover it.
*Setting* the lock isn't a problem if it's interrupted since we can
just return to the user and tell them they were interrupted - at
which point they can elect to retry.
(*) Silly unlink
We want to remove silly unlink files if we can, rather than leaving
them for the salvager to clear up.
Note that whilst these calls are no longer interruptible, they do have
timeouts on them, so if the server stops responding the call will fail with
something like ETIME or ECONNRESET.
Without this, the following:
kAFS: Unexpected error from FS.StoreData -512
appears in dmesg when a pending store data gets interrupted and some
processes may just hang.
Additionally, make the code that checks/updates the server record ignore
failure due to interruption if the main call is uninterruptible and if the
server has an address list. The next op will check it again since the
expiration time on the old list has past.
Fixes: d2ddc776a4 ("afs: Overhaul volume and server record caching and fileserver rotation")
Reported-by: Jonathan Billings <jsbillings@jsbillings.org>
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----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=yiyv
-----END PGP SIGNATURE-----
Merge tag 'afs-next-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"A set of fix and development patches for AFS for 5.2.
Summary:
- Fix the AFS file locking so that sqlite can run on an AFS mount and
also so that firefox and gnome can use a homedir that's mounted
through AFS.
This required emulation of fine-grained locking when the server
will only support whole-file locks and no upgrade/downgrade. Four
modes are provided, settable by mount parameter:
"flock=local" - No reference to the server
"flock=openafs" - Fine-grained locks are local-only, whole-file
locks require sufficient server locks
"flock=strict" - All locks require sufficient server locks
"flock=write" - Always get an exclusive server lock
If the volume is a read-only or backup volume, then flock=local for
that volume.
- Log extra information for a couple of cases where the client mucks
up somehow: AFS vnode with undefined type and dir check failure -
in both cases we seem to end up with unfilled data, but the issues
happen infrequently and are difficult to reproduce at will.
- Implement silly rename for unlink() and rename().
- Set i_blocks so that du can get some information about usage.
- Fix xattr handlers to return the right amount of data and to not
overflow buffers.
- Implement getting/setting raw AFS and YFS ACLs as xattrs"
* tag 'afs-next-20190507' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Implement YFS ACL setting
afs: Get YFS ACLs and information through xattrs
afs: implement acl setting
afs: Get an AFS3 ACL as an xattr
afs: Fix getting the afs.fid xattr
afs: Fix the afs.cell and afs.volume xattr handlers
afs: Calculate i_blocks based on file size
afs: Log more information for "kAFS: AFS vnode with undefined type\n"
afs: Provide mount-time configurable byte-range file locking emulation
afs: Add more tracepoints
afs: Implement sillyrename for unlink and rename
afs: Add directory reload tracepoint
afs: Handle lock rpc ops failing on a file that got deleted
afs: Improve dir check failure reports
afs: Add file locking tracepoints
afs: Further fix file locking
afs: Fix AFS file locking to allow fine grained locks
afs: Calculate lock extend timer from set/extend reply reception
afs: Split wait from afs_make_call()
Log more information when "kAFS: AFS vnode with undefined type\n" is
displayed due to a vnode record being retrieved from the server that
appears to have a duff file type (usually 0). This prints more information
to try and help pin down the problem.
Signed-off-by: David Howells <dhowells@redhat.com>
debugging printks left in ->destroy_inode() and so's the
update of inode count; we could take the latter to RCU-delayed
part (would take only moving the check on module exit past
rcu_barrier() there), but debugging output ought to either
stay where it is or go into ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Provide byte-range file locking emulation that can be configured at mount
time to one of four modes:
(1) flock=local. Locking is done locally only and no reference is made to
the server.
(2) flock=openafs. Byte-range locking is done locally only; whole-file
locking is done with reference to the server. Whole-file locks cannot
be upgraded unless the client holds an exclusive lock.
(3) flock=strict. Byte-range and whole-file locking both require a
sufficient whole-file lock on the server.
(4) flock=write. As strict, but the client always gets an exclusive
whole-file lock on the server.
Signed-off-by: David Howells <dhowells@redhat.com>
Add four more tracepoints:
(1) afs_make_fs_call1 - Split from afs_make_fs_call but takes a filename
to log also.
(2) afs_make_fs_call2 - Like the above but takes two filenames to log.
(3) afs_lookup - Log the result of doing a successful lookup, including a
negative result (fid 0:0).
(4) afs_get_tree - Log the set up of a volume for mounting.
It also extends the name buffer on the afs_edit_dir tracepoint to 24 chars
and puts quotes around the filename in the text representation.
Signed-off-by: David Howells <dhowells@redhat.com>
Implement sillyrename for AFS unlink and rename, using the NFS variant
implementation as a basis.
Note that the asynchronous file locking extender/releaser has to be
notified with a state change to stop it complaining if there's a race
between that and the actual file deletion.
A tracepoint, afs_silly_rename, is also added to note the silly rename and
the cleanup. The afs_edit_dir tracepoint is given some extra reason
indicators and the afs_flock_ev tracepoint is given a silly-delete file
lock cancellation indicator.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull vfs mount infrastructure updates from Al Viro:
"The rest of core infrastructure; no new syscalls in that pile, but the
old parts are switched to new infrastructure. At that point
conversions of individual filesystems can happen independently; some
are done here (afs, cgroup, procfs, etc.), there's also a large series
outside of that pile dealing with NFS (quite a bit of option-parsing
stuff is getting used there - it's one of the most convoluted
filesystems in terms of mount-related logics), but NFS bits are the
next cycle fodder.
It got seriously simplified since the last cycle; documentation is
probably the weakest bit at the moment - I considered dropping the
commit introducing Documentation/filesystems/mount_api.txt (cutting
the size increase by quarter ;-), but decided that it would be better
to fix it up after -rc1 instead.
That pile allows to do followup work in independent branches, which
should make life much easier for the next cycle. fs/super.c size
increase is unpleasant; there's a followup series that allows to
shrink it considerably, but I decided to leave that until the next
cycle"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
afs: Use fs_context to pass parameters over automount
afs: Add fs_context support
vfs: Add some logging to the core users of the fs_context log
vfs: Implement logging through fs_context
vfs: Provide documentation for new mount API
vfs: Remove kern_mount_data()
hugetlbfs: Convert to fs_context
cpuset: Use fs_context
kernfs, sysfs, cgroup, intel_rdt: Support fs_context
cgroup: store a reference to cgroup_ns into cgroup_fs_context
cgroup1_get_tree(): separate "get cgroup_root to use" into a separate helper
cgroup_do_mount(): massage calling conventions
cgroup: stash cgroup_root reference into cgroup_fs_context
cgroup2: switch to option-by-option parsing
cgroup1: switch to option-by-option parsing
cgroup: take options parsing into ->parse_monolithic()
cgroup: fold cgroup1_mount() into cgroup1_get_tree()
cgroup: start switching to fs_context
ipc: Convert mqueue fs to fs_context
proc: Add fs_context support to procfs
...
All users of VM_MAX_READAHEAD actually convert it to kbytes and then to
pages. Define the macro explicitly as (SZ_128K / PAGE_SIZE). This
simplifies the expression in every filesystem. Also rename the macro to
VM_READAHEAD_PAGES to properly convey its meaning. Finally remove unused
VM_MIN_READAHEAD
[akpm@linux-foundation.org: fix fs/io_uring.c, per Stephen]
Link: http://lkml.kernel.org/r/20181221144053.24318-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Alter the AFS automounting code to create and modify an fs_context struct
when parameterising a new mount triggered by an AFS mountpoint rather than
constructing device name and option strings.
Also remove the cell=, vol= and rwpath options as they are then redundant.
The reason they existed is because the 'device name' may be derived
literally from a mountpoint object in the filesystem, so default cell and
parent-type information needed to be passed in by some other method from
the automount routines. The vol= option didn't end up being used.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Eric W. Biederman <ebiederm@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add fs_context support to the AFS filesystem, converting the parameter
parsing to store options there.
This will form the basis for namespace propagation over mountpoints within
the AFS model, thereby allowing AFS to be used in containers more easily.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Increase the sizes of the volume ID to 64 bits and the vnode ID (inode
number equivalent) to 96 bits to allow the support of YFS.
This requires the iget comparator to check the vnode->fid rather than i_ino
and i_generation as i_ino is not sufficiently capacious. It also requires
this data to be placed into the vnode cache key for fscache.
For the moment, just discard the top 32 bits of the vnode ID when returning
it though stat.
Signed-off-by: David Howells <dhowells@redhat.com>
Alter the dynroot mount so that cells created by manipulation of
/proc/fs/afs/cells and /proc/fs/afs/rootcell and by specification of a root
cell as a module parameter will cause directories for those cells to be
created in the dynamic root superblock for the network namespace[*].
To this end:
(1) Only one dynamic root superblock is now created per network namespace
and this is shared between all attempts to mount it. This makes it
easier to find the superblock to modify.
(2) When a dynamic root superblock is created, the list of cells is walked
and directories created for each cell already defined.
(3) When a new cell is added, if a dynamic root superblock exists, a
directory is created for it.
(4) When a cell is destroyed, the directory is removed.
(5) These directories are created by calling lookup_one_len() on the root
dir which automatically creates them if they don't exist.
[*] Inasmuch as network namespaces are currently supported here.
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----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=1ow3
-----END PGP SIGNATURE-----
Merge tag 'afs-fixes-20180514' into afs-proc
backmerge AFS fixes that went into mainline and deal with
the conflict in fs/afs/fsclient.c
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Implement network namespacing within AFS, but don't yet let mounts occur
outside the init namespace. An additional patch will be required propagate
the network namespace across automounts.
Signed-off-by: David Howells <dhowells@redhat.com>
It's possible for an AFS file server to issue a whole-volume notification
that callbacks on all the vnodes in the file have been broken. This is
done for R/O and backup volumes (which don't have per-file callbacks) and
for things like a volume being taken offline.
Fix callback handling to detect whole-volume notifications, to track it
across operations and to check it during inode validation.
Fixes: c435ee3455 ("afs: Overhaul the callback handling")
Signed-off-by: David Howells <dhowells@redhat.com>
The afs directory loading code (primarily afs_read_dir()) locks all the
pages that hold a directory's content blob to defend against
getdents/getdents races and getdents/lookup races where the competitors
issue conflicting reads on the same data. As the reads will complete
consecutively, they may retrieve different versions of the data and
one may overwrite the data that the other is busy parsing.
Fix this by not locking the pages at all, but rather by turning the
validation lock into an rwsem and getting an exclusive lock on it whilst
reading the data or validating the attributes and a shared lock whilst
parsing the data. Sharing the attribute validation lock should be fine as
the data fetch will retrieve the attributes also.
The individual page locks aren't needed at all as the only place they're
being used is to serialise data loading.
Without this patch, the:
if (!test_bit(AFS_VNODE_DIR_VALID, &dvnode->flags)) {
...
}
part of afs_read_dir() may be skipped, leaving the pages unlocked when we
hit the success: clause - in which case we try to unlock the not-locked
pages, leading to the following oops:
page:ffffe38b405b4300 count:3 mapcount:0 mapping:ffff98156c83a978 index:0x0
flags: 0xfffe000001004(referenced|private)
raw: 000fffe000001004 ffff98156c83a978 0000000000000000 00000003ffffffff
raw: dead000000000100 dead000000000200 0000000000000001 ffff98156b27c000
page dumped because: VM_BUG_ON_PAGE(!PageLocked(page))
page->mem_cgroup:ffff98156b27c000
------------[ cut here ]------------
kernel BUG at mm/filemap.c:1205!
...
RIP: 0010:unlock_page+0x43/0x50
...
Call Trace:
afs_dir_iterate+0x789/0x8f0 [kafs]
? _cond_resched+0x15/0x30
? kmem_cache_alloc_trace+0x166/0x1d0
? afs_do_lookup+0x69/0x490 [kafs]
? afs_do_lookup+0x101/0x490 [kafs]
? key_default_cmp+0x20/0x20
? request_key+0x3c/0x80
? afs_lookup+0xf1/0x340 [kafs]
? __lookup_slow+0x97/0x150
? lookup_slow+0x35/0x50
? walk_component+0x1bf/0x490
? path_lookupat.isra.52+0x75/0x200
? filename_lookup.part.66+0xa0/0x170
? afs_end_vnode_operation+0x41/0x60 [kafs]
? __check_object_size+0x9c/0x171
? strncpy_from_user+0x4a/0x170
? vfs_statx+0x73/0xe0
? __do_sys_newlstat+0x39/0x70
? __x64_sys_getdents+0xc9/0x140
? __x64_sys_getdents+0x140/0x140
? do_syscall_64+0x5b/0x160
? entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: f3ddee8dc4 ("afs: Fix directory handling")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Split the AFS dynamic root stuff out of the main directory handling file
and into its own file as they share little in common.
The dynamic root code also gets its own dentry and inode ops tables.
Signed-off-by: David Howells <dhowells@redhat.com>
Support the AFS dynamic root which is a pseudo-volume that doesn't connect
to any server resource, but rather is just a root directory that
dynamically creates mountpoint directories where the name of such a
directory is the name of the cell.
Such a mount can be created thus:
mount -t afs none /afs -o dyn
Dynamic root superblocks aren't shared except by bind mounts and
propagation. Cell root volumes can then be mounted by referring to them by
name, e.g.:
ls /afs/grand.central.org/
ls /afs/.grand.central.org/
The kernel will upcall to consult the DNS if the address wasn't supplied
directly.
Signed-off-by: David Howells <dhowells@redhat.com>
When an AFS inode is allocated by afs_alloc_inode(), the allocated
afs_vnode struct isn't necessarily reset from the last time it was used as
an inode because the slab constructor is only invoked once when the memory
is obtained from the page allocator.
This means that information can leak from one inode to the next because
we're not calling kmem_cache_zalloc(). Some of the information isn't
reset, in particular the permit cache pointer.
Bring the clearances up to date.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
This is a pure automated search-and-replace of the internal kernel
superblock flags.
The s_flags are now called SB_*, with the names and the values for the
moment mirroring the MS_* flags that they're equivalent to.
Note how the MS_xyz flags are the ones passed to the mount system call,
while the SB_xyz flags are what we then use in sb->s_flags.
The script to do this was:
# places to look in; re security/*: it generally should *not* be
# touched (that stuff parses mount(2) arguments directly), but
# there are two places where we really deal with superblock flags.
FILES="drivers/mtd drivers/staging/lustre fs ipc mm \
include/linux/fs.h include/uapi/linux/bfs_fs.h \
security/apparmor/apparmorfs.c security/apparmor/include/lib.h"
# the list of MS_... constants
SYMS="RDONLY NOSUID NODEV NOEXEC SYNCHRONOUS REMOUNT MANDLOCK \
DIRSYNC NOATIME NODIRATIME BIND MOVE REC VERBOSE SILENT \
POSIXACL UNBINDABLE PRIVATE SLAVE SHARED RELATIME KERNMOUNT \
I_VERSION STRICTATIME LAZYTIME SUBMOUNT NOREMOTELOCK NOSEC BORN \
ACTIVE NOUSER"
SED_PROG=
for i in $SYMS; do SED_PROG="$SED_PROG -e s/MS_$i/SB_$i/g"; done
# we want files that contain at least one of MS_...,
# with fs/namespace.c and fs/pnode.c excluded.
L=$(for i in $SYMS; do git grep -w -l MS_$i $FILES; done| sort|uniq|grep -v '^fs/namespace.c'|grep -v '^fs/pnode.c')
for f in $L; do sed -i $f $SED_PROG; done
Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get rid of the afs_writeback record that kAFS is using to match keys with
writes made by that key.
Instead, keep a list of keys that have a file open for writing and/or
sync'ing and iterate through those.
Signed-off-by: David Howells <dhowells@redhat.com>
The current code assumes that volumes and servers are per-cell and are
never shared, but this is not enforced, and, indeed, public cells do exist
that are aliases of each other. Further, an organisation can, say, set up
a public cell and a private cell with overlapping, but not identical, sets
of servers. The difference is purely in the database attached to the VL
servers.
The current code will malfunction if it sees a server in two cells as it
assumes global address -> server record mappings and that each server is in
just one cell.
Further, each server may have multiple addresses - and may have addresses
of different families (IPv4 and IPv6, say).
To this end, the following structural changes are made:
(1) Server record management is overhauled:
(a) Server records are made independent of cell. The namespace keeps
track of them, volume records have lists of them and each vnode
has a server on which its callback interest currently resides.
(b) The cell record no longer keeps a list of servers known to be in
that cell.
(c) The server records are now kept in a flat list because there's no
single address to sort on.
(d) Server records are now keyed by their UUID within the namespace.
(e) The addresses for a server are obtained with the VL.GetAddrsU
rather than with VL.GetEntryByName, using the server's UUID as a
parameter.
(f) Cached server records are garbage collected after a period of
non-use and are counted out of existence before purging is allowed
to complete. This protects the work functions against rmmod.
(g) The servers list is now in /proc/fs/afs/servers.
(2) Volume record management is overhauled:
(a) An RCU-replaceable server list is introduced. This tracks both
servers and their coresponding callback interests.
(b) The superblock is now keyed on cell record and numeric volume ID.
(c) The volume record is now tied to the superblock which mounts it,
and is activated when mounted and deactivated when unmounted.
This makes it easier to handle the cache cookie without causing a
double-use in fscache.
(d) The volume record is loaded from the VLDB using VL.GetEntryByNameU
to get the server UUID list.
(e) The volume name is updated if it is seen to have changed when the
volume is updated (the update is keyed on the volume ID).
(3) The vlocation record is got rid of and VLDB records are no longer
cached. Sufficient information is stored in the volume record, though
an update to a volume record is now no longer shared between related
volumes (volumes come in bundles of three: R/W, R/O and backup).
and the following procedural changes are made:
(1) The fileserver cursor introduced previously is now fleshed out and
used to iterate over fileservers and their addresses.
(2) Volume status is checked during iteration, and the server list is
replaced if a change is detected.
(3) Server status is checked during iteration, and the address list is
replaced if a change is detected.
(4) The abort code is saved into the address list cursor and -ECONNABORTED
returned in afs_make_call() if a remote abort happened rather than
translating the abort into an error message. This allows actions to
be taken depending on the abort code more easily.
(a) If a VMOVED abort is seen then this is handled by rechecking the
volume and restarting the iteration.
(b) If a VBUSY, VRESTARTING or VSALVAGING abort is seen then this is
handled by sleeping for a short period and retrying and/or trying
other servers that might serve that volume. A message is also
displayed once until the condition has cleared.
(c) If a VOFFLINE abort is seen, then this is handled as VBUSY for the
moment.
(d) If a VNOVOL abort is seen, the volume is rechecked in the VLDB to
see if it has been deleted; if not, the fileserver is probably
indicating that the volume couldn't be attached and needs
salvaging.
(e) If statfs() sees one of these aborts, it does not sleep, but
rather returns an error, so as not to block the umount program.
(5) The fileserver iteration functions in vnode.c are now merged into
their callers and more heavily macroised around the cursor. vnode.c
is removed.
(6) Operations on a particular vnode are serialised on that vnode because
the server will lock that vnode whilst it operates on it, so a second
op sent will just have to wait.
(7) Fileservers are probed with FS.GetCapabilities before being used.
This is where service upgrade will be done.
(8) A callback interest on a fileserver is set up before an FS operation
is performed and passed through to afs_make_call() so that it can be
set on the vnode if the operation returns a callback. The callback
interest is passed through to afs_iget() also so that it can be set
there too.
In general, record updating is done on an as-needed basis when we try to
access servers, volumes or vnodes rather than offloading it to work items
and special threads.
Notes:
(1) Pre AFS-3.4 servers are no longer supported, though this can be added
back if necessary (AFS-3.4 was released in 1998).
(2) VBUSY is retried forever for the moment at intervals of 1s.
(3) /proc/fs/afs/<cell>/servers no longer exists.
Signed-off-by: David Howells <dhowells@redhat.com>
Overhaul the way that the in-kernel AFS client keeps track of cells in the
following manner:
(1) Cells are now held in an rbtree to make walking them quicker and RCU
managed (though this is probably overkill).
(2) Cells now have a manager work item that:
(A) Looks after fetching and refreshing the VL server list.
(B) Manages cell record lifetime, including initialising and
destruction.
(B) Manages cell record caching whereby threads are kept around for a
certain time after last use and then destroyed.
(C) Manages the FS-Cache index cookie for a cell. It is not permitted
for a cookie to be in use twice, so we have to be careful to not
allow a new cell record to exist at the same time as an old record
of the same name.
(3) Each AFS network namespace is given a manager work item that manages
the cells within it, maintaining a single timer to prod cells into
updating their DNS records.
This uses the reduce_timer() facility to make the timer expire at the
soonest timed event that needs happening.
(4) When a module is being unloaded, cells and cell managers are now
counted out using dec_after_work() to make sure the module text is
pinned until after the data structures have been cleaned up.
(5) Each cell's VL server list is now protected by a seqlock rather than a
semaphore.
Signed-off-by: David Howells <dhowells@redhat.com>
Overhaul permit caching in AFS by making it per-vnode and sharing permit
lists where possible.
When most of the fileserver operations are called, they return a status
structure indicating the (revised) details of the vnode or vnodes involved
in the operation. This includes the access mark derived from the ACL
(named CallerAccess in the protocol definition file). This is cacheable
and if the ACL changes, the server will tell us that it is breaking the
callback promise, at which point we can discard the currently cached
permits.
With this patch, the afs_permits structure has, at the end, an array of
{ key, CallerAccess } elements, sorted by key pointer. This is then cached
in a hash table so that it can be shared between vnodes with the same
access permits.
Permit lists can only be shared if they contain the exact same set of
key->CallerAccess mappings.
Note that that table is global rather than being per-net_ns. If the keys
in a permit list cross net_ns boundaries, there is no problem sharing the
cached permits, since the permits are just integer masks.
Since permit lists pin keys, the permit cache also makes it easier for a
future patch to find all occurrences of a key and remove them by means of
setting the afs_permits::invalidated flag and then clearing the appropriate
key pointer. In such an event, memory barriers will need adding.
Lastly, the permit caching is skipped if the server has sent either a
vnode-specific or an entire-server callback since the start of the
operation.
Signed-off-by: David Howells <dhowells@redhat.com>
Overhaul the AFS callback handling by the following means:
(1) Don't give up callback promises on vnodes that we are no longer using,
rather let them just expire on the server or let the server break
them. This is actually more efficient for the server as the callback
lookup is expensive if there are lots of extant callbacks.
(2) Only give up the callback promises we have from a server when the
server record is destroyed. Then we can just give up *all* the
callback promises on it in one go.
(3) Servers can end up being shared between cells if cells are aliased, so
don't add all the vnodes being backed by a particular server into a
big FID-indexed tree on that server as there may be duplicates.
Instead have each volume instance (~= superblock) register an interest
in a server as it starts to make use of it and use this to allow the
processor for callbacks from the server to find the superblock and
thence the inode corresponding to the FID being broken by means of
ilookup_nowait().
(4) Rather than iterating over the entire callback list when a mass-break
comes in from the server, maintain a counter of mass-breaks in
afs_server (cb_seq) and make afs_validate() check it against the copy
in afs_vnode.
It would be nice not to have to take a read_lock whilst doing this,
but that's tricky without using RCU.
(5) Save a ref on the fileserver we're using for a call in the afs_call
struct so that we can access its cb_s_break during call decoding.
(6) Write-lock around callback and status storage in a vnode and read-lock
around getattr so that we don't see the status mid-update.
This has the following consequences:
(1) Data invalidation isn't seen until someone calls afs_validate() on a
vnode. Unfortunately, we need to use a key to query the server, but
getting one from a background thread is tricky without caching loads
of keys all over the place.
(2) Mass invalidation isn't seen until someone calls afs_validate().
(3) Callback breaking is going to hit the inode_hash_lock quite a bit.
Could this be replaced with rcu_read_lock() since inodes are destroyed
under RCU conditions.
Signed-off-by: David Howells <dhowells@redhat.com>
Push the network namespace pointer to more places in AFS, including the
afs_server structure (which doesn't hold a ref on the netns).
In particular, afs_put_cell() now takes requires a net ns parameter so that
it can safely alter the netns after decrementing the cell usage count - the
cell will be deallocated by a background thread after being cached for a
period, which means that it's not safe to access it after reducing its
usage count.
Signed-off-by: David Howells <dhowells@redhat.com>
Keep a reference to the cell in the superblock info structure in addition
to the volume and net pointers. This will make it easier to clean up in a
future patch in which afs_put_volume() will need the cell pointer.
Whilst we're at it, make the cell and volume getting functions return a
pointer to the object got to make the call sites look neater.
Signed-off-by: David Howells <dhowells@redhat.com>
Lay the groundwork for supporting network namespaces (netns) to the AFS
filesystem by moving various global features to a network-namespace struct
(afs_net) and providing an instance of this as a temporary global variable
that everything uses via accessor functions for the moment.
The following changes have been made:
(1) Store the netns in the superblock info. This will be obtained from
the mounter's nsproxy on a manual mount and inherited from the parent
superblock on an automount.
(2) The cell list is made per-netns. It can be viewed through
/proc/net/afs/cells and also be modified by writing commands to that
file.
(3) The local workstation cell is set per-ns in /proc/net/afs/rootcell.
This is unset by default.
(4) The 'rootcell' module parameter, which sets a cell and VL server list
modifies the init net namespace, thereby allowing an AFS root fs to be
theoretically used.
(5) The volume location lists and the file lock manager are made
per-netns.
(6) The AF_RXRPC socket and associated I/O bits are made per-ns.
The various workqueues remain global for the moment.
Changes still to be made:
(1) /proc/fs/afs/ should be moved to /proc/net/afs/ and a symlink emplaced
from the old name.
(2) A per-netns subsys needs to be registered for AFS into which it can
store its per-netns data.
(3) Rather than the AF_RXRPC socket being opened on module init, it needs
to be opened on the creation of a superblock in that netns.
(4) The socket needs to be closed when the last superblock using it is
destroyed and all outstanding client calls on it have been completed.
This prevents a reference loop on the namespace.
(5) It is possible that several namespaces will want to use AFS, in which
case each one will need its own UDP port. These can either be set
through /proc/net/afs/cm_port or the kernel can pick one at random.
The init_ns gets 7001 by default.
Other issues that need resolving:
(1) The DNS keyring needs net-namespacing.
(2) Where do upcalls go (eg. DNS request-key upcall)?
(3) Need something like open_socket_in_file_ns() syscall so that AFS
command line tools attempting to operate on an AFS file/volume have
their RPC calls go to the right place.
Signed-off-by: David Howells <dhowells@redhat.com>
Pull ->s_options removal from Al Viro:
"Preparations for fsmount/fsopen stuff (coming next cycle). Everything
gets moved to explicit ->show_options(), killing ->s_options off +
some cosmetic bits around fs/namespace.c and friends. Basically, the
stuff needed to work with fsmount series with minimum of conflicts
with other work.
It's not strictly required for this merge window, but it would reduce
the PITA during the coming cycle, so it would be nice to have those
bits and pieces out of the way"
* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
isofs: Fix isofs_show_options()
VFS: Kill off s_options and helpers
orangefs: Implement show_options
9p: Implement show_options
isofs: Implement show_options
afs: Implement show_options
affs: Implement show_options
befs: Implement show_options
spufs: Implement show_options
bpf: Implement show_options
ramfs: Implement show_options
pstore: Implement show_options
omfs: Implement show_options
hugetlbfs: Implement show_options
VFS: Don't use save/replace_mount_options if not using generic_show_options
VFS: Provide empty name qstr
VFS: Make get_filesystem() return the affected filesystem
VFS: Clean up whitespace in fs/namespace.c and fs/super.c
Provide a function to create a NUL-terminated string from unterminated data
Implement the show_options superblock op for afs as part of a bid to get
rid of s_options and generic_show_options() to make it easier to implement
a context-based mount where the mount options can be passed individually
over a file descriptor.
Also implement the show_devname op to display the correct device name and thus
avoid the need to display the cell= and volume= options.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Add xattrs to allow the user to get/set metadata in lieu of having pioctl()
available. The following xattrs are now available:
- "afs.cell"
The name of the cell in which the vnode's volume resides.
- "afs.fid"
The volume ID, vnode ID and vnode uniquifier of the file as three hex
numbers separated by colons.
- "afs.volume"
The name of the volume in which the vnode resides.
For example:
# getfattr -d -m ".*" /mnt/scratch
getfattr: Removing leading '/' from absolute path names
# file: mnt/scratch
afs.cell="mycell.myorg.org"
afs.fid="10000b:1:1"
afs.volume="scratch"
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allocate struct backing_dev_info separately instead of embedding it
inside the superblock. This unifies handling of bdi among users.
CC: David Howells <dhowells@redhat.com>
CC: linux-afs@lists.infradead.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark those kmem allocations that are known to be easily triggered from
userspace as __GFP_ACCOUNT/SLAB_ACCOUNT, which makes them accounted to
memcg. For the list, see below:
- threadinfo
- task_struct
- task_delay_info
- pid
- cred
- mm_struct
- vm_area_struct and vm_region (nommu)
- anon_vma and anon_vma_chain
- signal_struct
- sighand_struct
- fs_struct
- files_struct
- fdtable and fdtable->full_fds_bits
- dentry and external_name
- inode for all filesystems. This is the most tedious part, because
most filesystems overwrite the alloc_inode method.
The list is far from complete, so feel free to add more objects.
Nevertheless, it should be close to "account everything" approach and
keep most workloads within bounds. Malevolent users will be able to
breach the limit, but this was possible even with the former "account
everything" approach (simply because it did not account everything in
fact).
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Modify the request_module to prefix the file system type with "fs-"
and add aliases to all of the filesystems that can be built as modules
to match.
A common practice is to build all of the kernel code and leave code
that is not commonly needed as modules, with the result that many
users are exposed to any bug anywhere in the kernel.
Looking for filesystems with a fs- prefix limits the pool of possible
modules that can be loaded by mount to just filesystems trivially
making things safer with no real cost.
Using aliases means user space can control the policy of which
filesystem modules are auto-loaded by editing /etc/modprobe.d/*.conf
with blacklist and alias directives. Allowing simple, safe,
well understood work-arounds to known problematic software.
This also addresses a rare but unfortunate problem where the filesystem
name is not the same as it's module name and module auto-loading
would not work. While writing this patch I saw a handful of such
cases. The most significant being autofs that lives in the module
autofs4.
This is relevant to user namespaces because we can reach the request
module in get_fs_type() without having any special permissions, and
people get uncomfortable when a user specified string (in this case
the filesystem type) goes all of the way to request_module.
After having looked at this issue I don't think there is any
particular reason to perform any filtering or permission checks beyond
making it clear in the module request that we want a filesystem
module. The common pattern in the kernel is to call request_module()
without regards to the users permissions. In general all a filesystem
module does once loaded is call register_filesystem() and go to sleep.
Which means there is not much attack surface exposed by loading a
filesytem module unless the filesystem is mounted. In a user
namespace filesystems are not mounted unless .fs_flags = FS_USERNS_MOUNT,
which most filesystems do not set today.
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Kees Cook <keescook@chromium.org>
Reported-by: Kees Cook <keescook@google.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
rxrpc sockets only work in the initial network namespace so it isn't
possible to support afs in any other network namespace.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There's no reason to call rcu_barrier() on every
deactivate_locked_super(). We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.
Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths. E.g. on my machine exit_group() of a last process in IPC
namespace takes 0.07538s. rcu_barrier() takes 0.05188s of that time.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pass mount flags to sget() so that it can use them in initialising a new
superblock before the set function is called. They could also be passed to the
compare function.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Seeing that just about every destructor got that INIT_LIST_HEAD() copied into
it, there is no point whatsoever keeping this INIT_LIST_HEAD in inode_init_once();
the cost of taking it into inode_init_always() will be negligible for pipes
and sockets and negative for everything else. Not to mention the removal of
boilerplate code from ->destroy_inode() instances...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Set s_id in the superblock to the name of the AFS volume that this superblock
corresponds to.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jianping Liu