Updated SCU AFE initialization values accordingly to the recipe 10.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We are logging excessive output when hot unplug from expander. Moving
that to debug.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If the scu efi driver is disabled but the option-rom is enabled (during an efi
boot) allow the code to fallback to scanning legacy option-rom space for the
parameters.
Reported-by: Yinghai Lu <yinghai.lu@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Removing not used / bit-rotten ATAPI code. This needs to go back
and debugged at a later date.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[reflow against devel, delete dead sati headers]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The sas address can be retrieved from the domain device and then
converted to the always little-endian format in the remote node context.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
An lldd need never look at the contents of an smp_discover_response frame.
Kill the remaining locations where isci is looking at it:
1/ covering for expanders that do not set the stp_attached bit (already
handled by sas_ex_discover_end_dev)
2/ an overkill method to notifiy the rest of the driver about remote_device
sas addresses
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This is step 1 of removing the contortions to:
1/ unparse expander phy data into a smp discover frame
2/ open-code-parse the smp discover fram into a domain_device.dev_type equivalent
libsas has already spent cycles determining the dev_type, so now that
scic_sds_remote_device is unified with isci_remote_device we can
directly reference dev_type.
This might also change multi-level expander detection as we previously only
looked at dev_type == EDGE_DEV and we did not consider the FANOUT_DEV case.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The construction routines scic_remote_device_[de]a_construct both reference
the need to call scic_remote_device_construct first. Delete that comment and
just have them call it explicitly, also:
* move the comments from header to source
* delete dead references to scic_[de]a_remote_device_add_phy
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that the core/lldd remote_device data structures are nominally unified
merge the corresponding sources into the top-level directory. Also move the
remote_node_context infrastructure which has no analog at the lldd level.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that they are one in the same object remove the back pointer reference
in favor of container_of.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A rnc object has the same lifetime as its associated remote_device. It might
get re-initialized, but a remote device always has an rnc member. Preparation
for unifying scic_sds_remote_device and isci_remote_device
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove the extra logic to poll each controller for interrupts, that's
the core's job for shared interrupts.
While testing noticed that a number of interrupts fire while waiting for
the completion tasklet to run, so added an irq-ack.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Removed any instances of the_* and this_* to variable names that are more
meaningful and tell us what they actually are.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If the platform specifies invalid parameters warn the user and fallback to
internal defaults rather than fail the driver load altogether.
Reported-by: Yinghai Lu <yinghai.lu@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The element_length is 2 bytes.
Reported-by: Yinghai Lu <yinghai.lu@oracle.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Removes unnecessary usage of BUG_ON macro, excluding core directory.
In some cases macro is unnecesary, check is done in caller function.
In other cases macro is replaced by if construction with
appropriate warning.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
[changed some survivable bug conditions to WARN_ONCE]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Clean warnings and errors reported by sparse tool.
request.c:430:50: warning: mixing different enum types
remote_device.c:534:39: warning: symbol 'flags' shadows an earlier one
task.c:495:44: warning: mixing different enum types
scic_sds_controller.c:2155:24: warning: mixing different enum types
scic_sds_controller.c:2272:36: warning: mixing different enum types
scic_sds_controller.c:2911:38: warning: incorrect type in initializer (different address spaces)
scic_sds_controller.c:2913:25: warning: incorrect type in argument 2 (different address spaces)
scic_sds_request.c:875:34: warning: cast removes address space of expression
scic_sds_request.c:876:123: warning: incorrect type in argument 2 (different address spaces)
scic_sds_port.c:585:51: warning: incorrect type in assignment (different address spaces)
scic_sds_port.c:712:9: warning: incorrect type in argument 2 (different address spaces)
scic_sds_port.c:1770:25: warning: incorrect type in argument 2 (different address spaces)
Signed-off-by: Bartosz Barcinski <Bartosz.Barcinski@intel.com>
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
[fixed up some false positives and misconversions]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge struct sci_base_phy into scic_sds_phy. Until now sci_base_phy was
referenced using scic_sds_phy->parent field.
'sci_base_phy' state machine handlers were also merged into scic_sds_phy
state handlers.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maciej Trela <Maciej.Trela@intel.com>
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge struct sci_base_port into scic_sds_port. Until now sci_base_port
was referenced indirectly with scic_sds_port->parent field.
'sci_base_port' state machine handlers were also incorporated into
scic_sds_port handlers.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maciej Trela <Maciej.Trela@intel.com>
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge struct sci_base_remote_device into scic_sds_remote_device. As for
now sci_base_remote_device was accessed indirectly using
scic_sds_remote_device->parent field. Both machine state handlers are
also merged together.
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Maciej Trela <Maciej.Trela@intel.com>
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove the state handler indirections for the scic_controller, and replace
them with procedural calls that check for the correct state first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove the insane infrastructure for preallocating coheren DMA regions,
and just allocate the memory where needed. This also gets rid of the
aligment adjustments given that Documentation/DMA-API-HOWTO.txt sais:
"The cpu return address and the DMA bus master address are both
guaranteed to be aligned to the smallest PAGE_SIZE order which
is greater than or equal to the requested size. This invariant
exists (for example) to guarantee that if you allocate a chunk
which is smaller than or equal to 64 kilobytes, the extent of the
buffer you receive will not cross a 64K boundary."
Signed-off-by: Christoph Hellwig <hch@lst.de>
[djbw: moved allocation from start to init, re-add memset]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Instead of filling up tables with default handlers call the default
handler in the only caller.
IMHO the whole state handlers concept is not very suitable for the
isci request. For example there is a single real instance of the
start handler, and we'd be much better off just having a check for
the right state in the only caller, than all this mess. It's
quite similar for the abort handler as well.
Even the actual state machine has a lot of states that are rather
pointless. The initial and constructed states are not needed at all
as the request is not reachable for calls before it's fully set up and
started. And the abort state should be replaced with an abort actions
and a state transition to the completed state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge struct sci_base_request into scic_sds_request, and also factor the two
types of state machine handlers into one function. While we're at it also
remove lots of duplicate incorrect kerneldoc comments for the state machine
handlers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge struct sci_base_controller into scic_sds_controller, and also factor
the two types of state machine handlers into one function. While we're at
it also remove lots of duplicate incorrect kerneldoc comments for the state
machine handlers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove a couple of layers around read/writel to make the driver readable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A domain_device can always reference back to ->lldd_ha unlike local lldd
structures. Fix up cases where the driver uses local objects to look up the
isci_host. This also changes the calling conventions of some routines to
expect a valid isci_host parameter rather than re-lookup the pointer on entry.
Incidentally cleans up some macros that are longer to type than the open-coded
equivalent:
isci_host_from_sas_ha
isci_dev_from_domain_dev
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Require a valid isci_host in support of the general cleanup to not
re-lookup the host via potentially fragile methods when more robust
methods are available. Also cleans up some more casting that should be
using container_of() to up-cast a base structure in a more type-safe
manner.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the case of internal discovery related STP/SATA I/O started
through sas_execute_task the host lock is not taken by libsas before
calling lldd_execute_task, so the lock should not be managed before
calling back to libsas through task->task_done or sas_task_abort.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The driver SATA LUN reset function incorrectly sent an SRST deassert
FIS, which is unnecessary because the core initiates the entire SATA
soft reset state machine from the assert request.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the case of I/O requests that fail at submit time because of a
pending reset condition, the host lock for SATA/STP devices must be
managed for any SCSI-initiated I/O before sas_task_abort is called.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When a TMF times-out, the request is set back to "aborting".
Requests in the "aborting" state must be terminated when
LUN and device resets occur.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Converting the all CAPS data types to lower case.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
These routines are just stubs, re-add them when / if they are needed. Also
cleanup remote_device_stopped.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* mark needlessly global routines static
* delete unused functions
* move kernel-doc blocks from header files to source
* reorder some functions to delete declarations
* more default handler cleanups phy
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Delete some macros that are longer to type than the open coded operation
that they perform.
scic_sds_phy_get_base_state_machine
scic_sds_phy_get_starting_substate_machine
scic_sds_port_get_base_state_machine
scic_sds_port_get_ready_substate_machine
scic_sds_remote_device_get_base_state_machine
scic_sds_remote_device_get_ready_substate_machine
scic_sds_remote_node_context_set_remote_node_index
scic_sds_controller_get_base_state_machine
Also performs some collateral cleanups like killing casts that assume
structure member ordering, and consolidating a lot of duplicated default
handler code (the primary callers of the *_get_base_state_machine macros) via
a helper.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Just move isci_pci_driver below the function definitions and delete the
declarations. A couple other whitespace fixups, and unused symbol
deletions.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Removed isci_event_* calls and call those functions directly.
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use min_t to address:
drivers/scsi/isci/probe_roms.c: In function ‘isci_get_efi_var’:
drivers/scsi/isci/probe_roms.c:241: warning: comparison of distinct pointer types lacks a cast
Reported-by: David Milburn <dmilburn@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The original apc mode definition is the correct one, the fix from commit
4711ba10 "isci: fix oem parameter initialization and mode detection" was based
on a typo from a specification update.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Exposing the user config parameters through the kernel module parameters.
The kernel module params will have the default values set and we will no
longer pulling the default values for user params from the core.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
1/ Since commit 858d4aa7 "isci: Move firmware loading to per PCI device" we have
been silently falling back to built-in defaults for the parameter settings by
skipping the call to scic_oem_parameters_set().
2/ The afe parameters from the firmware were not being honored
3/ The latest oem parameter definition flips the mode_type values which are
now 0: for APC 1: for MPC. For APC we need to make sure all the phys
default to the same address otherwise strict_wide_ports will cause duplicate
domains.
4/ Fix up the driver announcement to indicate the source of the
parameters.
5/ Fix up the sas addresses to be unique per controller (in the fallback case)
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Updating the EFI variable OEM parameter retrieval after examining the EFI
variable exported via sysfs.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Added fixups for the OROM parsing code after testing with BIOS OROM
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since the data structure for oem from orom/efi/firmware is the same as what
the core uses, we can just do a direct copy instead of assignment.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
These are the finalized values that the driver can expect to see in
production.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
1/ add OEM paramater support for mode_type (MPC vs APC)
2/ add OEM parameter support for max_number_concurrent_device_spin_up
3/ cleanup scic_sds_controller_start_next_phy
todo: hook up the amp control afe parameters into the afe init code
Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
[cleaned up scic_sds_controller_start_next_phy]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Adding EFI variable retrieving for OEM parameters. Still need GUID and
variable name.
Also updated the data struct for oem parameters and hex file for firmware
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[fix CONFIG_EFI=n compile error]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We need to scan the OROM for signature and grab the OEM parameters. We
also need to do the same for EFI. If all fails then we resort to user
binary blob, and if that fails then we go to the defaults.
Share the format with the create_fw utility so that all possible sources
of the parameters are in-sync.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the case where submitted I/Os fail with the status code
SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, the execute function now waits
until scic_lock is cleared before calling the helper function
"isci_request_signal_device_reset" which sets the flag for the pending
reset condition on the I/O.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A domain_device has the same lifetime as its related scsi_target. The
scsi_target is reference counted based on outstanding commands,
therefore it is safe to assume that if we have a valid sas_task that the
->dev pointer is also valid.
The asd_sas_port of a domain_device has the same lifetime as the driver
so it can also never be NULL as long as the sas_task is valid and the
driver is loaded.
This also cleans up isci_task_complete_for_upper_layer(), renames it to
isci_task_refuse() and notices that the isci_completion_selection
parameter was set to isci_perform_normal_io_completion by all callers.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Make sure all pending I/O including any in the libsas error handler
process is cleaned-up.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the case of I/O requests being failed because of a required device
reset condition, set the response and status to indicate an I/O failure.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since libsas takes the domain device sata_dev.ap->lock before submitting
a task, error completions in the submit path for SATA devices must
unlock/relock when completing the sas_task back to libsas.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The request may be in the "aborted" or the "completed" state when
performing a task management operation on it.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the case where a SAS or SATA LUN reset TMF is built a NULL pointer
dereference occurred because of the (unused) callback data pointer.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Added a request "dead" state for use when a termination wait times-out.
isci_terminate_pending_requests now detaches the device's pending list
and terminates each entry on the detached list.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Since the request structure contains a pointer to the completion to be
used if the request is being aborted or terminated, there is no reason
to pass the completion as a pointer to isci_terminate_request_core().
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Made sure the device ready check accounts for all states.
Moved the aborted task check into the loop of pulling task requests
off of the submitted list.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
[remove host and device starting state checks]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The pointer to the core representation of a request is marked NULL at
completion, but we need to save the i/o tag for task management.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
[revise changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If there is a pending device reset, the I/O is used to accomplish the reset by setting the
RESET bit in the task status, and then putting the task into the error handler
path using sas abort task.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Corrected use of the request state_lock in the completion callback.
In the case where an abort (or reset) thread is trying to terminate an
I/O request, it sets the request state to "aborting" (or "terminating")
if the state is still "starting". One of the bugs was to never set the
state to "completed". Another was to not correctly recognize the
situation where the I/O had completed but the sas_task was still pending
callback to task_done - this was typically a problem in the LUN and
device reset cases.
It is now possible that we leave isci_task_abort_task() with
request->io_request_completion pointing to localy allocated
aborted_io_completion struct. It may result in a system crash.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Maciej Trela <Maciej.Trela@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Changes to move management of the reqs_in_process entry for the request here.
Made changes to note when the task is already in the abort path and
cannot be completed through callbacks.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the condition where outstanding I/Os are being cleaned from the device
requests in process list, the cleanup function needs to check that the
request is actually a sas-task and not a task management function.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The remote_device_lock is currently used to protect a controller global
resource (RNCs), but the remote_device_lock is per-port.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Until we synchronize against device removal this limits the damage of
use after free bugs to the driver's own objects. Unless we implement
reference counting we need to ensure at least a subset of a remote
device is valid at all times. We follow the lead of other libsas
drivers that also preallocate devices.
This also enforces maximum remote device accounting at the lldd layer,
but the core may still run out of RNC's before we hit this limit.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Replace the device completion infrastructure with the controller wide
event queue. There was a potential for the stop and ready notifications
to corrupt each other, now that cannot happen.
The stop pending flag cannot be used until devices are statically
allocated. We temporarily need to maintain a completion to handle
waiting for an object that has disappeared, but we can at least stop
scribbling on freed memory.
A future change will also get rid of the "stopping" state as it should
not be exposed to the rest of the driver.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The midlayer is already throttling i/o in the places where host_quiesce
was trying to prevent further i/o to the device. It's also problematic
in that it holds a lock over GFP_KERNEL allocations.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
It belies the fact that isci_remote_device and scic_sds_remote_device
are one in same object with the same lifetime rules.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
isci_host_by_id() should have been a clue that an array would have been
a simpler approach.
Reported-by: James Bottomley <James.Bottomley@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Ross says:
"The memory allocation for these requests doesn’t take into account the
additional memory needed when the code in
scic_sds_s[mst]p_request_assign_buffers() shifts the struct
scu_task_context so that it is cache line aligned:
In an example from my machine, total buffer that I’ve given to SCIC goes
from 0x410024566f84 to 0x410024567308. From this same example, this
call shifts my task_context_buffer from 0x410024567208 to
0x410024567240.
This means that the task_context_buffer that used to range from
0x410024567208 to 0x410024567308 instead now goes from 0x410024567240 to
0x410024567340.
When the memset() call at the end of scic_task_request_construct()
clears out this task_context_buffer, it does so from 0x410024567240 to
0x410024567340, effectively killing whatever buffer follows this
allocation in memory."
djbw:
Use the kernel's PTR_ALIGN instead of
scic_sds_request_align_task_context_buffer() and SMP_CACHE_BYTES instead of
the local CACHE_LINE_SIZE definition.
TODO: These allocations really want to be better defined in a union rather
than opaque buffers carved up by macros.
Reported-by: Ross Zwisler <ross.zwisler@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When aborting a task context we need to be sure that the hardware has acted on
this request (retrieved the task context) before invalidating the remote node
context. In the case of the "dummy" task context and remote node we do not
have the full state machine that goes through the complete tc abort and rnc
invalidate states. Instead we ensure the hardware has seen and acted on
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Moving some of the chattiness of warning messages to debug so only the Linux
system messages are shown.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Adding support for PHY_FUNC_LINK_RESET and PHY_FUNC_DISABLE. This allow the
sysfs knob enable (both 0 and 1) and link_reset to work properly.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Core reworks to support stopping and re-starting the controller, lays the
groundwork for phy disable / re-enable and fixes other bugs around port/phy
setup/teardown.
Signed-off-by: Pawel Marek <pawel.marek@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Observed that some devices return a d2h fis, treat like an sdb error fis.
Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There is a condition whereby TCs (task contexts) can jump to the head of
the round robin queue causing indefinite starvation of pending tasks.
Posting a TC to a suspended RNC (remote node context) causes the
hardware to select that task first, but since the RNC is suspended the
scheduler proceeds to the next task in the expected round robin fashion,
restoring TC arbitration fairness.
Signed-off-by: Tomasz Chudy <tomasz.chudy@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Prepare the timer api for the arrival of dynamic creation and
destruction events from the core. It pretended to do this previously
but the core to date only used it in a static init-time only fashion.
This is an interim fix until a cleaner event queue can be developed.
1/ make all locking external to the api (add WARN_ONCE to verify)
2/ add a timer_destroy interface (to be used by the core)
3/ use del_timer_sync() prior to deallocating timer data
4/ delete the "timer_list" indirection, we only have timers allocated
for the isci_host
5/ fix detection of timer list allocation errors
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Undo the open coded and incorrect translation of the oem parameter sas
address to its libsas expected format.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Removed all callbacks in the deprecated.c. Core will call the appropriate
functions directly.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Renaming the callbacks to apparopriate event notify calls for the LLDD.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove abstraction for SG building and get rid of callbacks for getting
DMA memory mapping.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We can copy the data directly to and from sg for SATA PIO read operations.
There is no reason to involve the hardware SGL. In the process we also need
to kmap the sg because we don't know where that can come from.
We also do to not call phys_to_virt(). The driver already has the information.
We can just calculcate the appropriate offets.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
These macros are not necessary. We can do 64bit math directly.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Sending aborts/resets to SAS/SATA targets in APC mode eventually causes
an assert in scic_sds_apc_agent_link_up(). We need to handle the hard reset
case for apc mode ports.
Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Update the SCI Core to comprehend the changes in the TC completion
codes from A0 to B0. Specifically, there isnew R_ER code
differences for command and data FISes.
Changes are as follows:
1) 0x16 now additionally indicates an R_ERR received for a COMMAND
FIS being sent to a SATA target. 0x16 for SSP still indicates a
NAK received for a COMMAND frame. Fix is to retry TC to be compliant
with SATA spec or ensure proper error handling of return value
(not spec compliant I don't believe).
2) 0x1B was previously called DONE_BREAK_RCVD for STP and
DONE_LL_ABORT_ERR for SSP. Now it is universally called
DONE_LL_ABORT_ERR. This is purely a superficial change.
3) 0x32 is no longer a reserved code. Now it indicates
DONE_CMD_SDMA_ERR for STP/SSP. There was a fatal error on the
SDMA for a command IU (includes Raw frames). Consider retry,
but at a minimum gracefully fail the request.
4) 0x33 is no longer a reserved code. Now it indicates
DONE_CMD_LL_ABORT_ERR for SSP. There was a break receivd
during transmission of a command IU. Consider retry, but
at a minimum gracefully fail the request.
Signed-off-by: Tomasz Chudy <Tomasz.Chudy@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use the dynamic revision detection code in
scic_sds_phy_link_layer_initialization() and apply some coding style
fixups (long deref chains). The compile time max link rate setting is
removed in favor of honoring the user-parameter max.
Reported-by: Krzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support for the following parameters in SCIC:
/**
* This field specifies the NOTIFY (ENABLE SPIN UP) primitive
* insertion frequency for this phy index.
*/
u32 notify_enable_spin_up_insertion_frequency;
/**
* This method specifies the number of transmitted DWORDs within which
* to transmit a single ALIGN primitive. This value applies regardless
* of what type of device is attached or connection state. A value of
* 0 indicates that no ALIGN primitives will be inserted.
*/
u16 align_insertion_frequency;
/**
* This method specifies the number of transmitted DWORDs within which
* to transmit 2 ALIGN primitives. This applies for SAS connections
* only. A minimum value of 3 is required for this field.
*/
u16 in_connection_align_insertion_frequency;
Signed-off-by: Krzysztof Wierzbicki <Krzysztof.Wierzbicki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
At init and RNC resume we need to touch every phy in a port to be sure
we have initialized STP properties in the case where port_index !=
phy_index. Also add some missing __iomem annotations.
Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The default should be 5us. The hardware encodes it in 256ns increments,
so the value should be 20 to approximate a 5us timeout.
Signed-off-by: Tomasz Chudy <Tomasz.Chudy@intel.com>
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
c99 the struct initializers:
1/ allows grep to consistently show method name associations. The
naming is mostly consistent (except when it isn't) so this guarantees
coverage of present and future exception cases.
2/ let's the compiler guarantee that the state table array entry
correlates with an actual state name and detect accidental reordering or
deletion of states.
/ allows default handler's to be identified easily
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Moved the firmware loading from per adapter to per PCI device. This should
prevent firmware from being loaded twice becuase of 2 SCU controller per
PCI device. We do have to do it per PCI device because request_firmware()
requires a struct device passed in.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The proc_name field in struct scsi_host_template is exported through sysfs and
allows userspace tools to identify the driver behind a particular SCSI host
controller.
Initialize this field so that userspace tools can easily identify isci host
controllers through sysfs.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This removes scic_controller_get_handler_methods and its
associated unused code.
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
[djbw: kill off the legacy handler, now that we have basic error isr support]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some of the chain walks to get back to our dev are invalid.
isci_remote_device_change_state: delete rather than adding conditional deref
chain walking
isci_request_change_state: fix, it was being called too early
isci_request_ssp_io_request_get_lun: fix compile breakage hidden by ifdef DEBUG
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Inform libsas of the linkrate of direct attached links.
Reported-by: Haavard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Polling the event queue during scan is an unneeded holdover from the
original driver.
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
[djbw: ensure we flush all port events and domain discovery]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The lldd actively disallows requests in the "starting" state. Retrying
or holding off commands in this state is sub-optimal:
1/ it adds another state check to the fast path
2/ retrying can cause libsas to give up
However, isci's ->lldd_dev_found() routine already waits for controller
start to complete before allowing further progress. Checking the
"starting" state in isci_task_execute_task and the isr is redundant and
misleading. Clean this up and introduce a controller-wide event queue
to start reeling in "completion" proliferation in the driver.
The "stopping" state cleanups are in a similar vein, rely on the the isr
and other paths being precluded from occurring rather than implementing
state checking logic.
Reported-by: Christoph Hellwig <hch@infradead.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The indirection is unecessary and broken in the current case that assigns the
handlers based on a not up-to-date pdev->msix_enabled value.
Route the handlers directly to the requisite core routines.
Todo: hook up error interrupt handling
Reported-by: Jeff Garzik <jeff@garzik.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This will be replaced by state machine tracepoints and should have been a part
of the logger removal.
Ran across scic_sds_port_decrement_request_count() which is an ugly macro
which silently hides accounting errors. Turn it into a WARN_ONCE to see if it
ever triggers.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Callbacks are already type unsafe, obfuscating things further by casting the
callback routine is less safe because now function argument number changes
will not be caught by the compiler.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Change names from upper to low letters
Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove duplicated license and header file includes that were leftover
from commit 4c1db2d0 "isci: consolidate core" (in the isci.git historical
branch).
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
scic_sds_stp_remote_device_ready_substate_handler_table[]
scic_sds_smp_remote_device_ready_substate_handler_table[]
c99 the struct initializers:
1/ allows grep to consistently show method name associations. The
naming is mostly consistent (except when it isn't) so this guarantees
coverage of present and future exception cases.
2/ let's the compiler guarantee that the state table array entry
correlates with an actual state name and detect accidental reordering or
deletion of states.
3/ allows default handler's to be identified easily
Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Change names from upper to low letters
Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
c99 the struct initializers (scic_sds_remote_device_state_handler_table[]):
1/ allows grep to consistently show method name associations. The
naming is mostly consistent (except when it isn't) so this guarantees
coverage of present and future exception cases.
2/ let's the compiler guarantee that the state table array entry
correlates with an actual state name and detect accidental reordering or
deletion of states.
3/ allows default handler's to be identified easily
Change names from upper to low letters
Cleanup empty lines
Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
We no longer use the loglevel parameter. Remove.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
[rebased after killing SCI_IO_REQUEST_DATA_DIRECTION]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
It's an unnecessary typedef that mirrors the kernel's enum
dma_data_direction.
Also cleanup some long variable names along the way.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the
chipset.
This is a snapshot of the first publicly available version of the driver,
commit 4c1db2d0 in the 'historical' branch.
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical
Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Maciej Patelczyk