Commit Graph

387 Commits

Author SHA1 Message Date
Jayamohan Kallickal ed58ea2ab5 [SCSI] be2iscsi: Fixing memory allocation for connection
This patch fixes some situations where enough resources were not
avaialable  when targets exceeded a certain limit

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:30:06 +05:30
Jayamohan Kallickal 90a289e876 [SCSI] be2iscsi: Remove debug code
This patch removes some debug lines which are unnecessary and
also aligns some lines in code

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:29:54 +05:30
Jayamohan Kallickal dafab8e079 [SCSI] be2iscsi: cleans up abort handling
This patch cleans up abort handling when TMF is sent

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 18:29:44 +05:30
Jayamohan Kallickal 944b2fbce2 [SCSI] be2iscsi: Fix for a possible udelay while holding lock
This patch fixes a situation where we could call udelay
while holding spin_lock

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 17:40:04 +05:30
Jayamohan Kallickal 4183122dbc [SCSI] be2iscsi: Cleanup of resets for device and target
This patch cleans up device and target reset handling
for the driver

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 17:39:24 +05:30
Jayamohan Kallickal 309ce156aa [SCSI] libiscsi: Make iscsi_eh_target_reset start with session reset
The iscsi_eh_target_reset has been modified to attempt
target reset only. If it fails, then iscsi_eh_session_reset
will be called.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-03 17:39:04 +05:30
Jayamohan Kallickal f98c96b0b6 [SCSI] be2iscsi: Adding support for BE3
This patch contains changes to support the BE3 chip

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-17 13:41:10 -06:00
Jayamohan Kallickal 7c56533cf4 [SCSI] be2iscsi: correction in the claculation for num_cxn_wrb
This patch correct the math done for num_cxn_wrb

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:34:20 -06:00
Jayamohan Kallickal b30c6dab1d [SCSI] be2iscsi: changing the chip opcode for TEXT
This patch corrects the chipopcode for text and chooses
correct paramters for that command

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:34:18 -06:00
Jayamohan Kallickal caf818f118 [SCSI] be2iscsi: Ensure clean reuse of wrb
This patch ensures that wrb is cleanly resued for io path
and is memset to zero for non io path

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:34:16 -06:00
Jayamohan Kallickal f55a24f2c2 [SCSI] be2iscsi: correcting the return
This patch fixes an issue where return was not called properly.
Thanks to Mike Christie for spotting this

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:34:15 -06:00
Jayamohan Kallickal 5dc1c416b3 [SCSI] be2iscsi: Proper checking of state
This patch adds proper checking of value in for hba state.
We would be adding more states later on

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:34:13 -06:00
Jayamohan Kallickal 230dceb431 [SCSI] be2iscsi: Fix for first_burst
This patch fixes the first_burst being modified
instead of max_burst

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:34:11 -06:00
Jayamohan Kallickal d2eeb1ac35 [SCSI] be2iscsi: changing copyright to 2010
This patch replaces 2009 with 2010 in copyright statement

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:34:09 -06:00
Jayamohan Kallickal 32951dd8cd [SCSI] be2iscsi: Remove Ring mode from driver
Ring mode is not used. This patch removes the code.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:34:07 -06:00
Jayamohan Kallickal a3babda5b3 [SCSI] be2iscsi: Fix to allow driver to load when the FW allows more cids
This fix allows the driver to load when the FW allows more cids
than than the driver supports. The driver will limit the number of cid
to what it can support. There was no reason to fail the driver load,so,
correcting that

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:26:05 -06:00
Jayamohan Kallickal aa3590329f [SCSI] be2iscsi: Fixing the number of SGE's
The number of SGE's supported is fixed to what the
chip expects. Also, the max sectors set to tested values

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:26:03 -06:00
Jayamohan Kallickal 48bd86cf21 [SCSI] be2iscsi: Fixing Bug for multiple SGEs
The patch fixes a but where the sg_next is not assigned and hence
the first sge was being resused wrongly

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08 18:26:01 -06:00
Jayamohan Kallickal 9db0fb3aa4 [SCSI] be2iscsi: Enable TEXT req resp
This patch enables TEXT Request / Response for the driver

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:25 -06:00
Jayamohan Kallickal aa874f0738 [SCSI] be2iscsi: Fixing initialization of can_queue
This patch fixes can_queue being uninitiallized since it
was done before beiscsi_get_params was called.

Thanks to Mike Christie for identifying this

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:24 -06:00
Jayamohan Kallickal da7408c800 [SCSI] be2iscsi: The session failure only when Link Goes down
This fixes a situation where the sessions were being killed whenever
LinkUP is notified rather than LinkDown

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:24 -06:00
Jayamohan Kallickal 756d29c8c7 [SCSI] be2iscsi: Enable async mode for mcc rings
This patches enables async mode for mcc rings so that
multiple requests can be queued.

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:23 -06:00
Jayamohan Kallickal 51a462500f [SCSI] be2iscsi: No requirement for endianess change for data_count
This patch removes the endianess change that was wrongly
added for data_count

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:22 -06:00
Jayamohan Kallickal 0ecb0b45f2 [SCSI] be2iscsi: decide which requests need completion
This patch decides whether ack based completion is required or not

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:22 -06:00
Jayamohan Kallickal d7aea67b8a [SCSI] be2iscsi: Use of opcode in beiscsi_alloc_pdu
This patch enables use of opcode that is passed in

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:21 -06:00
Jayamohan Kallickal 2807afb741 [SCSI] be2iscsi:moved pci_set_drvdata to inside beiscsi_hba_alloc
This patch moves pci_set_drvdata to inside beiscsi_hba_alloc

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:20 -06:00
Jayamohan Kallickal 7bd6e25cdb [SCSI] be2iscsi: Added opcode for LOGOUT_RSP, TEXT_RESP, TMFUNC_RSP
This patch adds opcodes in thecompletion path that were
missed out earlier

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:19 -06:00
Jayamohan Kallickal d543148883 [SCSI] be2iscsi: Link Wrb with next Wrb
This patch will link the current allocated wrb with the next
 wrb that will be allocated. This is a requirement from the chip.

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:19 -06:00
Jayamohan Kallickal c24622886f [SCSI] be2iscsi: Move freeing of resources to stop_conn
We need to hold on to ep resources untill invalidate and
  close connection are completed

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:18 -06:00
Jayamohan Kallickal 7da5087971 [SCSI] be2iscsi: Use start cid and number of cid and icd from FW
This patch enablesi be2iscsi to use the start number and number
 of cids/icd provided by FW rather than hard coded values.

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18 10:48:17 -06:00
Jayamohan Kallickal 78b9fb6d38 [SCSI] be2iscsi: Adding support for various Async messages from chip
This patch allows for future addition of various async messages
from the chip. This ensures that the driver won't hit a BUG_ON if
the Firmware used is newer than inbox driver and so is using
latest async messages.

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-10 08:54:13 -06:00
Mike Christie 3fe5ae8b4c [SCSI] libiscsi: add warm target reset tmf support
This implements warm target reset tmf support for
the scsi-ml target reset callback. Previously we would
just drop the session in that callback. This patch will
now try a target reset and if that fails drop the session.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:01:36 -06:00
Jayamohan Kallickal 35e6601903 [SCSI] be2iscsi: Adding Ring Mode Wrb's V3
This patch adds support for ring based wrbs

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:39 -06:00
Jayamohan Kallickal bfead3b2cb [SCSI] be2iscsi: Adding msix and mcc_rings V3
This patch enables msix for be2iscsi. It also enables use
of mcc_rings for fw commands. Since the mcc eq creation is
dependent on msix I am sending as one patch

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04 12:00:38 -06:00
Jayamohan Kallickal 2afc95bf54 [SCSI] be2iscsi: Moving to pci_pools v3
This patch contains changes to use pci_pools for iscsi hdr
instead of pci_alloc_consistent. Here we alloc and free to pool
for every IO

v3:
- Remove cleanup loop in beiscsi_session_destroy
- Fixup for allocation failure handling in beiscsi_alloc_pdu
- Removed unused variable in beiscsi_session_destroy.

[jejb: fix up pci_pool_alloc address sizing problem]
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 14:01:55 -05:00
Jayamohan Kallickal b8b9e1b812 [SCSI] libiscsi: iscsi_session_setup to allow for private space
This patch contains changes that allow iscsi_session_setup
to allocate private space for LLD's

Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 14:01:39 -05:00
Jayamohan Kallickal 6733b39a13 [SCSI] be2iscsi: add 10Gbps iSCSI - BladeEngine 2 driver
[v2: fixed up virt_to_bus() issue spotted by sfr]
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-02 09:50:33 -05:00