Commit Graph

1111 Commits

Author SHA1 Message Date
Jianping Liu 3154060704 tkernel: sync code to the same with tk4 pub/lts/0017-kabi
Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue
and wujing. Partners can submit pull requests to this branch, and we
can pick the commits to tk4 pub/lts/0017-kabi easly.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-12 13:13:20 +08:00
Jianping Liu c62d6b571d ock: sync codes to ock 5.4.119-20.0009.21
Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:27:38 +08:00
Jianping Liu be16237b31 tkernel: add base tlinux kernel interfaces
Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:09:33 +08:00
Jason Gunthorpe 1524b12a6e RDMA/mlx5: Use irq xarray locking for mkey_table
The mkey_table xarray is touched by the reg_mr_callback() function which
is called from a hard irq. Thus all other uses of xa_lock must use the
_irq variants.

  WARNING: inconsistent lock state
  5.4.0-rc1 #12 Not tainted
  --------------------------------
  inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
  python3/343 [HC0[0]:SC0[0]:HE1:SE1] takes:
  ffff888182be1d40 (&(&xa->xa_lock)->rlock#3){?.-.}, at: xa_erase+0x12/0x30
  {IN-HARDIRQ-W} state was registered at:
    lock_acquire+0xe1/0x200
    _raw_spin_lock_irqsave+0x35/0x50
    reg_mr_callback+0x2dd/0x450 [mlx5_ib]
    mlx5_cmd_exec_cb_handler+0x2c/0x70 [mlx5_core]
    mlx5_cmd_comp_handler+0x355/0x840 [mlx5_core]
   [..]

   Possible unsafe locking scenario:

         CPU0
         ----
    lock(&(&xa->xa_lock)->rlock#3);
    <Interrupt>
      lock(&(&xa->xa_lock)->rlock#3);

   *** DEADLOCK ***

  2 locks held by python3/343:
   #0: ffff88818eb4bd38 (&uverbs_dev->disassociate_srcu){....}, at: ib_uverbs_ioctl+0xe5/0x1e0 [ib_uverbs]
   #1: ffff888176c76d38 (&file->hw_destroy_rwsem){++++}, at: uobj_destroy+0x2d/0x90 [ib_uverbs]

  stack backtrace:
  CPU: 3 PID: 343 Comm: python3 Not tainted 5.4.0-rc1 #12
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
  Call Trace:
   dump_stack+0x86/0xca
   print_usage_bug.cold.50+0x2e5/0x355
   mark_lock+0x871/0xb50
   ? match_held_lock+0x20/0x250
   ? check_usage_forwards+0x240/0x240
   __lock_acquire+0x7de/0x23a0
   ? __kasan_check_read+0x11/0x20
   ? mark_lock+0xae/0xb50
   ? mark_held_locks+0xb0/0xb0
   ? find_held_lock+0xca/0xf0
   lock_acquire+0xe1/0x200
   ? xa_erase+0x12/0x30
   _raw_spin_lock+0x2a/0x40
   ? xa_erase+0x12/0x30
   xa_erase+0x12/0x30
   mlx5_ib_dealloc_mw+0x55/0xa0 [mlx5_ib]
   uverbs_dealloc_mw+0x3c/0x70 [ib_uverbs]
   uverbs_free_mw+0x1a/0x20 [ib_uverbs]
   destroy_hw_idr_uobject+0x49/0xa0 [ib_uverbs]
   [..]

Fixes: 0417791536 ("RDMA/mlx5: Add missing synchronize_srcu() for MW cases")
Link: https://lore.kernel.org/r/20191024234910.GA9038@ziepe.ca
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-28 14:08:48 -03:00
Rafi Wiener c8973df2da RDMA/mlx5: Clear old rate limit when closing QP
Before QP is closed it changes to ERROR state, when this happens
the QP was left with old rate limit that was already removed from
the table.

Fixes: 7d29f349a4 ("IB/mlx5: Properly adjust rate limit on QP state transitions")
Signed-off-by: Rafi Wiener <rafiw@mellanox.com>
Signed-off-by: Oleg Kuporosov <olegk@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20191002120243.16971-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-10-17 16:07:25 -04:00
Jason Gunthorpe 0417791536 RDMA/mlx5: Add missing synchronize_srcu() for MW cases
While MR uses live as the SRCU 'update', the MW case uses the xarray
directly, xa_erase() causes the MW to become inaccessible to the pagefault
thread.

Thus whenever a MW is removed from the xarray we must synchronize_srcu()
before freeing it.

This must be done before freeing the mkey as re-use of the mkey while the
pagefault thread is using the stale mkey is undesirable.

Add the missing synchronizes to MW and DEVX indirect mkey and delete the
bogus protection against double destroy in mlx5_core_destroy_mkey()

Fixes: 534fd7aac5 ("IB/mlx5: Manage indirection mkey upon DEVX flow for ODP")
Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-7-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04 15:54:22 -03:00
Jason Gunthorpe aa603815c7 RDMA/mlx5: Put live in the correct place for ODP MRs
live is used to signal to the pagefault thread that the MR is initialized
and ready for use. It should be after the umem is assigned and all other
setup is completed. This prevents races (at least) of the form:

    CPU0                                     CPU1
mlx5_ib_alloc_implicit_mr()
 implicit_mr_alloc()
  live = 1
 imr->umem = umem
                                    num_pending_prefetch_inc()
                                      if (live)
				        atomic_inc(num_pending_prefetch)
 atomic_set(num_pending_prefetch,0) // Overwrites other thread's store

Further, live is being used with SRCU as the 'update' in an
acquire/release fashion, so it can not be read and written raw.

Move all live = 1's to after MR initialization is completed and use
smp_store_release/smp_load_acquire() for manipulating it.

Add a missing live = 0 when an implicit MR child is deleted, before
queuing work to do synchronize_srcu().

The barriers in update_odp_mr() were some broken attempt to create a
acquire/release, but were not even applied consistently and missed the
point, delete it as well.

Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-6-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04 15:54:22 -03:00
Jason Gunthorpe aa116b810a RDMA/mlx5: Order num_pending_prefetch properly with synchronize_srcu
During destroy setting live = 0 and then synchronize_srcu() prevents
num_pending_prefetch from incrementing, and also, ensures that all work
holding that count is queued on the WQ. Testing before causes races of the
form:

    CPU0                                         CPU1
  dereg_mr()
                                          mlx5_ib_advise_mr_prefetch()
            				   srcu_read_lock()
                                            num_pending_prefetch_inc()
					      if (!live)
   live = 0
   atomic_read() == 0
     // skip flush_workqueue()
                                              atomic_inc()
 					      queue_work();
            				   srcu_read_unlock()
   WARN_ON(atomic_read())  // Fails

Swap the order so that the synchronize_srcu() prevents this.

Fixes: a6bc3875f1 ("IB/mlx5: Protect against prefetch of invalid MR")
Link: https://lore.kernel.org/r/20191001153821.23621-5-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04 15:54:22 -03:00
Jason Gunthorpe 9dc775e7f5 RDMA/odp: Lift umem_mutex out of ib_umem_odp_unmap_dma_pages()
This fixes a race of the form:
    CPU0                               CPU1
mlx5_ib_invalidate_range()     mlx5_ib_invalidate_range()
				 // This one actually makes npages == 0
				 ib_umem_odp_unmap_dma_pages()
				 if (npages == 0 && !dying)
  // This one does nothing
  ib_umem_odp_unmap_dma_pages()
  if (npages == 0 && !dying)
     dying = 1;
                                    dying = 1;
				    schedule_work(&umem_odp->work);
     // Double schedule of the same work
     schedule_work(&umem_odp->work);  // BOOM

npages and dying must be read and written under the umem_mutex lock.

Since whenever ib_umem_odp_unmap_dma_pages() is called mlx5 must also call
mlx5_ib_update_xlt, and both need to be done in the same locking region,
hoist the lock out of unmap.

This avoids an expensive double critical section in
mlx5_ib_invalidate_range().

Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-4-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04 15:54:21 -03:00
Jason Gunthorpe f28b1932ea RDMA/mlx5: Fix a race with mlx5_ib_update_xlt on an implicit MR
mlx5_ib_update_xlt() must be protected against parallel free of the MR it
is accessing, also it must be called single threaded while updating the
HW. Otherwise we can have races of the form:

    CPU0                               CPU1
  mlx5_ib_update_xlt()
   mlx5_odp_populate_klm()
     odp_lookup() == NULL
     pklm = ZAP
                                      implicit_mr_get_data()
 				        implicit_mr_alloc()
 					  <update interval tree>
					mlx5_ib_update_xlt
					  mlx5_odp_populate_klm()
					    odp_lookup() != NULL
					    pklm = VALID
					   mlx5_ib_post_send_wait()

    mlx5_ib_post_send_wait() // Replaces VALID with ZAP

This can be solved by putting both the SRCU and the umem_mutex lock around
every call to mlx5_ib_update_xlt(). This ensures that the content of the
interval tree relavent to mlx5_odp_populate_klm() (ie mr->parent == mr)
will not change while it is running, and thus the posted WRs to update the
KLM will always reflect the correct information.

The race above will resolve by either having CPU1 wait till CPU0 completes
the ZAP or CPU0 will run after the add and instead store VALID.

The pagefault path adding children already holds the umem_mutex and SRCU,
so the only missed lock is during MR destruction.

Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20191001153821.23621-3-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04 15:54:21 -03:00
Jason Gunthorpe 880505cfef RDMA/mlx5: Do not allow rereg of a ODP MR
This code is completely broken, the umem of a ODP MR simply cannot be
discarded without a lot more locking, nor can an ODP mkey be blithely
destroyed via destroy_mkey().

Fixes: 6aec21f6a8 ("IB/mlx5: Page faults handling infrastructure")
Link: https://lore.kernel.org/r/20191001153821.23621-2-jgg@ziepe.ca
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-10-04 15:54:21 -03:00
Linus Torvalds 018c6837f3 RDMA subsystem updates for 5.4
This cycle mainly saw lots of bug fixes and clean up code across the core
 code and several drivers, few new functional changes were made.
 
 - Many cleanup and bug fixes for hns
 
 - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
   bnxt_re, efa
 
 - Share the query_port code between all the iWarp drivers
 
 - General rework and cleanup of the ODP MR umem code to fit better with
   the mmu notifier get/put scheme
 
 - Support rdma netlink in non init_net name spaces
 
 - mlx5 support for XRC devx and DC ODP
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl2A1ugACgkQOG33FX4g
 mxp+EQ//Ug8CyyDs40SGZztItoGghuQ4TVA2pXtuZ9LkFVJRWhYPJGOadHIYXqGO
 KQJJpZPQ02HTZUPWBZNKmD5bwHfErm4cS73/mVmUpximnUqu/UsLRJp8SIGmBg1D
 W1Lz1BJX24MdV8aUnChYvdL5Hbl52q+BaE99Z0haOvW7I3YnKJC34mR8m/A5MiRf
 rsNIZNPHdq2U6pKLgCbOyXib8yBcJQqBb8x4WNAoB1h4MOx+ir5QLfr3ozrZs1an
 xXgqyiOBmtkUgCMIpXC4juPN/6gw3Y5nkk2VIWY+MAY1a7jZPbI+6LJZZ1Uk8R44
 Lf2KSzabFMMYGKJYE1Znxk+JWV8iE+m+n6wWEfRM9l0b4gXXbrtKgaouFbsLcsQA
 CvBEQuiFSO9Kq01JPaAN1XDmhqyTarG6lHjXnW7ifNlLXnPbR1RJlprycExOhp0c
 axum5K2fRNW2+uZJt+zynMjk2kyjT1lnlsr1Rbgc4Pyionaiydg7zwpiac7y/bdS
 F7/WqdmPiff78KMi187EF5pjFqMWhthvBtTbWDuuxaxc2nrXSdiCUN+96j1amQUH
 yU/7AZzlnKeKEQQCR4xddsSs2eTrXiLLFRLk9GCK2eh4cUN212eHTrPLKkQf1cN+
 ydYbR2pxw3B38LCCNBy+bL+u7e/Tyehs4ynATMpBuEgc5iocTwE=
 =zHXW
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull RDMA subsystem updates from Jason Gunthorpe:
 "This cycle mainly saw lots of bug fixes and clean up code across the
  core code and several drivers, few new functional changes were made.

   - Many cleanup and bug fixes for hns

   - Various small bug fixes and cleanups in hfi1, mlx5, usnic, qed,
     bnxt_re, efa

   - Share the query_port code between all the iWarp drivers

   - General rework and cleanup of the ODP MR umem code to fit better
     with the mmu notifier get/put scheme

   - Support rdma netlink in non init_net name spaces

   - mlx5 support for XRC devx and DC ODP"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
  RDMA: Fix double-free in srq creation error flow
  RDMA/efa: Fix incorrect error print
  IB/mlx5: Free mpi in mp_slave mode
  IB/mlx5: Use the original address for the page during free_pages
  RDMA/bnxt_re: Fix spelling mistake "missin_resp" -> "missing_resp"
  RDMA/hns: Package operations of rq inline buffer into separate functions
  RDMA/hns: Optimize cmd init and mode selection for hip08
  IB/hfi1: Define variables as unsigned long to fix KASAN warning
  IB/{rdmavt, hfi1, qib}: Add a counter for credit waits
  IB/hfi1: Add traces for TID RDMA READ
  RDMA/siw: Relax from kmap_atomic() use in TX path
  IB/iser: Support up to 16MB data transfer in a single command
  RDMA/siw: Fix page address mapping in TX path
  RDMA: Fix goto target to release the allocated memory
  RDMA/usnic: Avoid overly large buffers on stack
  RDMA/odp: Add missing cast for 32 bit
  RDMA/hns: Use devm_platform_ioremap_resource() to simplify code
  Documentation/infiniband: update name of some functions
  RDMA/cma: Fix false error message
  RDMA/hns: Fix wrong assignment of qp_access_flags
  ...
2019-09-21 10:26:24 -07:00
Linus Torvalds 84da111de0 hmm related patches for 5.4
This is more cleanup and consolidation of the hmm APIs and the very
 strongly related mmu_notifier interfaces. Many places across the tree
 using these interfaces are touched in the process. Beyond that a cleanup
 to the page walker API and a few memremap related changes round out the
 series:
 
 - General improvement of hmm_range_fault() and related APIs, more
   documentation, bug fixes from testing, API simplification &
   consolidation, and unused API removal
 
 - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE, and
   make them internal kconfig selects
 
 - Hoist a lot of code related to mmu notifier attachment out of drivers by
   using a refcount get/put attachment idiom and remove the convoluted
   mmu_notifier_unregister_no_release() and related APIs.
 
 - General API improvement for the migrate_vma API and revision of its only
   user in nouveau
 
 - Annotate mmu_notifiers with lockdep and sleeping region debugging
 
 Two series unrelated to HMM or mmu_notifiers came along due to
 dependencies:
 
 - Allow pagemap's memremap_pages family of APIs to work without providing
   a struct device
 
 - Make walk_page_range() and related use a constant structure for function
   pointers
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl1/nnkACgkQOG33FX4g
 mxqaRg//c6FqowV1pQlLutvAOAgMdpzfZ9eaaDKngy9RVQxz+k/MmJrdRH/p/mMA
 Pq93A1XfwtraGKErHegFXGEDk4XhOustVAVFwvjyXO41dTUdoFVUkti6ftbrl/rS
 6CT+X90jlvrwdRY7QBeuo7lxx7z8Qkqbk1O1kc1IOracjKfNJS+y6LTamy6weM3g
 tIMHI65PkxpRzN36DV9uCN5dMwFzJ73DWHp1b0acnDIigkl6u5zp6orAJVWRjyQX
 nmEd3/IOvdxaubAoAvboNS5CyVb4yS9xshWWMbH6AulKJv3Glca1Aa7QuSpBoN8v
 wy4c9+umzqRgzgUJUe1xwN9P49oBNhJpgBSu8MUlgBA4IOc3rDl/Tw0b5KCFVfkH
 yHkp8n6MP8VsRrzXTC6Kx0vdjIkAO8SUeylVJczAcVSyHIo6/JUJCVDeFLSTVymh
 EGWJ7zX2iRhUbssJ6/izQTTQyCH3YIyZ5QtqByWuX2U7ZrfkqS3/EnBW1Q+j+gPF
 Z2yW8iT6k0iENw6s8psE9czexuywa/Lttz94IyNlOQ8rJTiQqB9wLaAvg9hvUk7a
 kuspL+JGIZkrL3ouCeO/VA6xnaP+Q7nR8geWBRb8zKGHmtWrb5Gwmt6t+vTnCC2l
 olIDebrnnxwfBQhEJ5219W+M1pBpjiTpqK/UdBd92A4+sOOhOD0=
 =FRGg
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull hmm updates from Jason Gunthorpe:
 "This is more cleanup and consolidation of the hmm APIs and the very
  strongly related mmu_notifier interfaces. Many places across the tree
  using these interfaces are touched in the process. Beyond that a
  cleanup to the page walker API and a few memremap related changes
  round out the series:

   - General improvement of hmm_range_fault() and related APIs, more
     documentation, bug fixes from testing, API simplification &
     consolidation, and unused API removal

   - Simplify the hmm related kconfigs to HMM_MIRROR and DEVICE_PRIVATE,
     and make them internal kconfig selects

   - Hoist a lot of code related to mmu notifier attachment out of
     drivers by using a refcount get/put attachment idiom and remove the
     convoluted mmu_notifier_unregister_no_release() and related APIs.

   - General API improvement for the migrate_vma API and revision of its
     only user in nouveau

   - Annotate mmu_notifiers with lockdep and sleeping region debugging

  Two series unrelated to HMM or mmu_notifiers came along due to
  dependencies:

   - Allow pagemap's memremap_pages family of APIs to work without
     providing a struct device

   - Make walk_page_range() and related use a constant structure for
     function pointers"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (75 commits)
  libnvdimm: Enable unit test infrastructure compile checks
  mm, notifier: Catch sleeping/blocking for !blockable
  kernel.h: Add non_block_start/end()
  drm/radeon: guard against calling an unpaired radeon_mn_unregister()
  csky: add missing brackets in a macro for tlb.h
  pagewalk: use lockdep_assert_held for locking validation
  pagewalk: separate function pointers from iterator data
  mm: split out a new pagewalk.h header from mm.h
  mm/mmu_notifiers: annotate with might_sleep()
  mm/mmu_notifiers: prime lockdep
  mm/mmu_notifiers: add a lockdep map for invalidate_range_start/end
  mm/mmu_notifiers: remove the __mmu_notifier_invalidate_range_start/end exports
  mm/hmm: hmm_range_fault() infinite loop
  mm/hmm: hmm_range_fault() NULL pointer bug
  mm/hmm: fix hmm_range_fault()'s handling of swapped out pages
  mm/mmu_notifiers: remove unregister_no_release
  RDMA/odp: remove ib_ucontext from ib_umem
  RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
  RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
  RDMA/mlx5: Use ib_umem_start instead of umem.address
  ...
2019-09-21 10:07:42 -07:00
Danit Goldberg 5d44adebbb IB/mlx5: Free mpi in mp_slave mode
ib_add_slave_port() allocates a multiport struct but never frees it.
Don't leak memory, free the allocated mpi struct during driver unload.

Cc: <stable@vger.kernel.org>
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/20190916064818.19823-3-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16 14:08:18 -03:00
Danit Goldberg 130c2c576e IB/mlx5: Use the original address for the page during free_pages
The removal of 'buffer' in the patch below caused free_page() to use a
value that had been offset since the wqe pointer is adjusted while the
routine runs.

The current implementation of free_pages() rounds down to a pfn,
discarding the adjustment, but this is not the right way to use the
API. Preserve the initial value and use it for free_page().

Fixes: 0f51427bd0 ("RDMA/mlx5: Cleanup WQE page fault handler")
Link: https://lore.kernel.org/r/20190916064818.19823-2-leon@kernel.org
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-16 13:39:56 -03:00
Jason Gunthorpe 75c66515e4 Merge tag 'v5.3-rc8' into rdma.git for-next
To resolve dependencies in following patches

mlx5_ib.h conflict resolved by keeing both hunks

Linux 5.3-rc8

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-09-13 16:59:51 -03:00
Maor Gottlieb 2b688ea5ef net/mlx5: Add flow steering actions to fs_cmd shim layer
Add flow steering actions: modify header and packet reformat
to the fs_cmd shim layer. This allows each namespace to define
possibly different functionality for alloc/dealloc action commands.

Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-03 12:54:19 -07:00
Saeed Mahameed a06ebb8d95 Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Merge mlx5-next patches needed for upcoming mlx5 software steering.

1) Alex adds HW bits and definitions required for SW steering
2) Ariel moves device memory management to mlx5_core (From mlx5_ib)
3) Maor, Cleanups and fixups for eswitch mode and RoCE
4) Mark, Set only stag for match untagged packets

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-02 00:16:05 -07:00
Ariel Levkovich c9b9dcb430 net/mlx5: Move device memory management to mlx5_core
Move the device memory allocation and deallocation commands
SW ICM memory to mlx5_core to expose this API for all
mlx5_core users.

This comes as preparation for supporting SW steering in kernel
where it will be required to allocate and register device
memory for direct rule insertion.

In addition, an API to register this device memory for future
remote access operations is introduced using the create_mkey
commands.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-09-01 23:44:41 -07:00
Saeed Mahameed 537f321097 Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
mlx5 HW spec and bits updates:
1) Aya exposes IP-in-IP capability in mlx5_core.
2) Maxim exposes lag tx port affinity capabilities.
3) Moshe adds VNIC_ENV internal rq counter bits.
4) ODP capabilities for DC transport

Misc updates:
5) Saeed, two compiler warnings cleanups
6) Add XRQ legacy commands opcodes
7) Use refcount_t for refcount
8) fix a -Wstringop-truncation warning
2019-08-28 11:48:56 -07:00
Jason Gunthorpe a0d8994b30 Merge branch 'mlx5-odp-dc' into rdma.git for-next
Michael Guralnik says:

====================
The series adds support for on-demand paging for DC transport.

As DC is a mlx-only transport, the capabilities are exposed to the user
using DEVX objects and later on through mlx5dv_query_device.
====================

Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies

* branch 'mlx5-odp-dc':
  IB/mlx5: Add page fault handler for DC initiator WQE
  IB/mlx5: Remove check of FW capabilities in ODP page fault handling
  net/mlx5: Set ODP capabilities for DC transport to max
2019-08-28 11:25:37 -03:00
Michael Guralnik 75e46fc02c IB/mlx5: Add page fault handler for DC initiator WQE
Parsing DC initiator WQEs upon page fault requires skipping an address
vector segment, as in UD WQEs.

Link: https://lore.kernel.org/r/20190819120815.21225-4-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-28 11:18:40 -03:00
Michael Guralnik 29af94987b IB/mlx5: Remove check of FW capabilities in ODP page fault handling
As page fault handling is initiated by FW, there is no need to check that
the ODP supports the operation and transport.

Link: https://lore.kernel.org/r/20190819120815.21225-3-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-28 11:18:39 -03:00
Mark Zhang d8abe88450 RDMA/mlx5: RDMA_RX flow type support for user applications
Currently user applications can only steer TCP/IP(NIC RX/RX) traffic.
This patch adds RDMA_RX as a new flow type to allow the user to insert
steering rules to control RDMA traffic.
Two destinations are supported(but not set at the same time): devx
flow table object and QP.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190819113626.20284-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-26 10:30:00 -04:00
Jason Gunthorpe c571feca2d RDMA/odp: use mmu_notifier_get/put for 'struct ib_ucontext_per_mm'
This is a significant simplification, no extra list is kept per FD, and
the interval tree is now shared between all the ucontexts, reducing
overhead if there are multiple ucontexts active.

Link: https://lore.kernel.org/r/20190806231548.25242-7-jgg@ziepe.ca
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 20:58:18 -03:00
Jason Gunthorpe 868df536f5 Merge branch 'odp_fixes' into rdma.git for-next
Jason Gunthorpe says:

====================
This is a collection of general cleanups for ODP to clarify some of the
flows around umem creation and use of the interval tree.
====================

The branch is based on v5.3-rc5 due to dependencies

* odp_fixes:
  RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
  RDMA/mlx5: Use ib_umem_start instead of umem.address
  RDMA/core: Make invalidate_range a device operation
  RDMA/odp: Use kvcalloc for the dma_list and page_list
  RDMA/odp: Check for overflow when computing the umem_odp end
  RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
  RDMA/odp: Split creating a umem_odp from ib_umem_get
  RDMA/odp: Make the three ways to create a umem_odp clear
  RMDA/odp: Consolidate umem_odp initialization
  RDMA/odp: Make it clearer when a umem is an implicit ODP umem
  RDMA/odp: Iterate over the whole rbtree directly
  RDMA/odp: Use the common interval tree library instead of generic
  RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:10:36 -03:00
Jason Gunthorpe fba0e448a2 RDMA/mlx5: Use odp instead of mr->umem in pagefault_mr
These are the same thing since mr always comes from odp->private. It is
confusing to reference the same memory via two names.

Link: https://lore.kernel.org/r/20190819111710.18440-13-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:43 -03:00
Jason Gunthorpe a705f3e3a1 RDMA/mlx5: Use ib_umem_start instead of umem.address
These are subtly different, the address is the original VA requested
during umem_get, while ib_umem_start() is the version that is rounded to
the proper page size, ie is the true start of the umem's dma map.

Link: https://lore.kernel.org/r/20190819111710.18440-12-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:43 -03:00
Moni Shoua ce51346fee RDMA/core: Make invalidate_range a device operation
The callback function 'invalidate_range' is implemented in a driver so the
place for it is in the ib_device_ops structure and not in ib_ucontext.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Link: https://lore.kernel.org/r/20190819111710.18440-11-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:43 -03:00
Jason Gunthorpe 0446cad9ca RDMA/odp: Provide ib_umem_odp_release() to undo the allocs
Now that there are allocator APIs that return the ib_umem_odp directly
it should be freed through a umem_odp free'er as well.

Link: https://lore.kernel.org/r/20190819111710.18440-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:42 -03:00
Jason Gunthorpe 261dc53f8e RDMA/odp: Split creating a umem_odp from ib_umem_get
This is the last creation API that is overloaded for both, there is very
little code sharing and a driver has to be specifically ready for a
umem_odp to be created to use the odp version.

Link: https://lore.kernel.org/r/20190819111710.18440-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:42 -03:00
Jason Gunthorpe f20bef6a95 RDMA/odp: Make the three ways to create a umem_odp clear
The three paths to build the umem_odps are kind of muddled, they are:
- As a normal ib_mr umem
- As a child in an implicit ODP umem tree
- As the root of an implicit ODP umem tree

Only the first two are actually umem's, the last is an abuse.

The implicit case can only be triggered by explicit driver request, it
should never be co-mingled with the normal case. While we are here, make
sensible function names and add some comments to make this clearer.

Link: https://lore.kernel.org/r/20190819111710.18440-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:42 -03:00
Jason Gunthorpe fd7dbf035e RDMA/odp: Make it clearer when a umem is an implicit ODP umem
Implicit ODP umems are special, they don't have any page lists, they don't
exist in the interval tree and they are never DMA mapped.

Instead of trying to guess this based on a zero length use an explicit
flag.

Further, do not allow non-implicit umems to be 0 size.

Link: https://lore.kernel.org/r/20190819111710.18440-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:42 -03:00
Jason Gunthorpe f993de88a5 RDMA/odp: Iterate over the whole rbtree directly
Instead of intersecting a full interval, just iterate over every element
directly. This is faster and clearer.

Link: https://lore.kernel.org/r/20190819111710.18440-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-21 14:08:24 -03:00
Moni Shoua 841b07f99a IB/mlx5: Block MR WR if UMR is not possible
Check conditions that are mandatory to post_send UMR WQEs.
1. Modifying page size.
2. Modifying remote atomic permissions if atomic access is required.

If either condition is not fulfilled then fail to post_send() flow.

Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-9-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20 13:44:45 -04:00
Moni Shoua 25a4517214 IB/mlx5: Fix MR re-registration flow to use UMR properly
The UMR WQE in the MR re-registration flow requires that
modify_atomic and modify_entity_size capabilities are enabled.
Therefore, check that the these capabilities are present before going to
umr flow and go through slow path if not.

Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-8-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20 13:44:45 -04:00
Moni Shoua 008157528a IB/mlx5: Report and handle ODP support properly
ODP depends on the several device capabilities, among them is the ability
to send UMR WQEs with that modify atomic and entity size of the MR.
Therefore, only if all conditions to send such a UMR WQE are met then
driver can report that ODP is supported. Use this check of conditions
in all places where driver needs to know about ODP support.

Also, implicit ODP support depends on ability of driver to send UMR WQEs
for an indirect mkey. Therefore, verify that all conditions to do so are
met when reporting support.

Fixes: c8d75a980f ("IB/mlx5: Respect new UMR capabilities")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-7-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20 13:44:45 -04:00
Moni Shoua 0e6613b41e IB/mlx5: Consolidate use_umr checks into single function
Introduce helper function to unify various use_umr checks.

Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-6-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20 13:44:44 -04:00
Jason Gunthorpe 27b7fb1ab7 RDMA/mlx5: Fix MR npages calculation for IB_ACCESS_HUGETLB
When ODP is enabled with IB_ACCESS_HUGETLB then the required pages
should be calculated based on the extent of the MR, which is rounded
to the nearest huge page alignment.

Fixes: d2183c6f19 ("RDMA/umem: Move page_shift from ib_umem to ib_odp_umem")
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190815083834.9245-5-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-20 13:44:43 -04:00
Leon Romanovsky 9dc4cfff11 RDMA/mlx5: Annotate lock dependency in bind/unbind slave port
NULL-ing notifier_call is performed under protection
of mlx5_ib_multiport_mutex lock. Such protection is
not easily spotted and better to be guarded by lockdep
annotation.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190813102814.22350-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-13 12:26:06 -04:00
Yishai Hadas 8293a598fe IB/mlx5: Expose XRQ legacy commands over the DEVX interface
Expose missing XRQ legacy commands over the DEVX interface.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190808084358.29517-5-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-13 12:24:32 -04:00
Yishai Hadas 972d7560ee IB/mlx5: Add legacy events to DEVX list
Add two events that were defined in the device specification but were
not exposed in the driver list.

Post this patch those events can be read over the DEVX events interface
once be reported by the firmware.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Edward Srouji <edwards@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190808084358.29517-4-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-13 12:24:17 -04:00
Doug Ledford 749b9eef50 Merge remote-tracking branch 'mlx5-next/mlx5-next' into wip/dl-for-next
Merging tip of mlx5-next in order to get changes related to adding
XRQ support to the DEVX interface needed prior to the following two
patches.

Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-13 12:19:19 -04:00
Yishai Hadas e9eec6a55c IB/mlx5: Fix use-after-free error while accessing ev_file pointer
Call to uverbs_close_fd() releases file pointer to 'ev_file' and
mlx5_ib_dev is going to be inaccessible. Cache pointer prior cleaning
resources to solve the KASAN warning below.

BUG: KASAN: use-after-free in devx_async_event_close+0x391/0x480 [mlx5_ib]
Read of size 8 at addr ffff888301e3cec0 by task devx_direct_tes/4631
CPU: 1 PID: 4631 Comm: devx_direct_tes Tainted: G OE 5.3.0-rc1-for-upstream-dbg-2019-07-26_01-19-56-93 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu2 04/01/2014
Call Trace:
dump_stack+0x9a/0xeb
print_address_description+0x1e2/0x400
? devx_async_event_close+0x391/0x480 [mlx5_ib]
__kasan_report+0x15c/0x1df
? devx_async_event_close+0x391/0x480 [mlx5_ib]
kasan_report+0xe/0x20
devx_async_event_close+0x391/0x480 [mlx5_ib]
__fput+0x26a/0x7b0
task_work_run+0x10d/0x180
exit_to_usermode_loop+0x137/0x160
do_syscall_64+0x3c7/0x490
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x7f5df907d664
Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f
80 00 00 00 00 8b 05 6a cd 20 00 48 63 ff 85 c0 75 13 b8
03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 44 f3 c3 66 90
48 83 ec 18 48 89 7c 24 08 e8
RSP: 002b:00007ffd353cb958 EFLAGS: 00000246 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 000056017a88c348 RCX: 00007f5df907d664
RDX: 00007f5df969d400 RSI: 00007f5de8f1ec90 RDI: 0000000000000006
RBP: 00007f5df9681dc0 R08: 00007f5de8736410 R09: 000056017a9d2dd0
R10: 000000000000000b R11: 0000000000000246 R12: 00007f5de899d7d0
R13: 00007f5df96c4248 R14: 00007f5de8f1ecb0 R15: 000056017ae41308

Allocated by task 4631:
save_stack+0x19/0x80
kasan_kmalloc.constprop.3+0xa0/0xd0
alloc_uobj+0x71/0x230 [ib_uverbs]
alloc_begin_fd_uobject+0x2e/0xc0 [ib_uverbs]
rdma_alloc_begin_uobject+0x96/0x140 [ib_uverbs]
ib_uverbs_run_method+0xdf0/0x1940 [ib_uverbs]
ib_uverbs_cmd_verbs+0x57e/0xdb0 [ib_uverbs]
ib_uverbs_ioctl+0x177/0x260 [ib_uverbs]
do_vfs_ioctl+0x18f/0x1010
ksys_ioctl+0x70/0x80
__x64_sys_ioctl+0x6f/0xb0
do_syscall_64+0x95/0x490
entry_SYSCALL_64_after_hwframe+0x49/0xbe

Freed by task 4631:
save_stack+0x19/0x80
__kasan_slab_free+0x11d/0x160
slab_free_freelist_hook+0x67/0x1a0
kfree+0xb9/0x2a0
uverbs_close_fd+0x118/0x1c0 [ib_uverbs]
devx_async_event_close+0x28a/0x480 [mlx5_ib]
__fput+0x26a/0x7b0
task_work_run+0x10d/0x180
exit_to_usermode_loop+0x137/0x160
do_syscall_64+0x3c7/0x490
entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888301e3cda8
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 280 bytes inside of 512-byte region
[ffff888301e3cda8, ffff888301e3cfa8)
The buggy address belongs to the page:
page:ffffea000c078e00 refcount:1 mapcount:0
mapping:ffff888352811300 index:0x0 compound_mapcount: 0
flags: 0x2fffff80010200(slab|head)
raw: 002fffff80010200 ffffea000d152608 ffffea000c077808 ffff888352811300
raw: 0000000000000000 0000000000250025 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888301e3cd80: fc fc fc fc fc fb fb fb fb fb fb fb fb fb fb fb
ffff888301e3ce00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888301e3ce80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888301e3cf00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888301e3cf80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
Disabling lock debugging due to kernel taint

Cc: <stable@vger.kernel.org> # 5.2
Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Link: https://lore.kernel.org/r/20190808081538.28772-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-12 10:46:30 -04:00
Kamal Heib 72a7720fca RDMA: Introduce ib_port_phys_state enum
In order to improve readability, add ib_port_phys_state enum to replace
the use of magic numbers.

Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Andrew Boyer <aboyer@tobark.org>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-12 10:18:52 -04:00
Dan Carpenter e7e6c6320c IB/mlx5: Check the correct variable in error handling code
The code accidentally checks "event_sub" instead of "event_sub->eventfd".

Fixes: 7597385371 ("IB/mlx5: Enable subscription for device events over DEVX")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190807123236.GA11452@mwanda
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-07 16:46:41 -04:00
Yishai Hadas f591822c3c IB/mlx5: Fix implicit MR release flow
Once implicit MR is being called to be released by
ib_umem_notifier_release() its leaves were marked as "dying".

However, when dereg_mr()->mlx5_ib_free_implicit_mr()->mr_leaf_free() is
called, it skips running the mr_leaf_free_action (i.e. umem_odp->work)
when those leaves were marked as "dying".

As such ib_umem_release() for the leaves won't be called and their MRs
will be leaked as well.

When an application exits/killed without calling dereg_mr we might hit the
above flow.

This fatal scenario is reported by WARN_ON() upon
mlx5_ib_dealloc_ucontext() as ibcontext->per_mm_list is not empty, the
call trace can be seen below.

Originally the "dying" mark as part of ib_umem_notifier_release() was
introduced to prevent pagefault_mr() from returning a success response
once this happened. However, we already have today the completion
mechanism so no need for that in those flows any more.  Even in case a
success response will be returned the firmware will not find the pages and
an error will be returned in the following call as a released mm will
cause ib_umem_odp_map_dma_pages() to permanently fail mmget_not_zero().

Fix the above issue by dropping the "dying" from the above flows.  The
other flows that are using "dying" are still needed it for their
synchronization purposes.

   WARNING: CPU: 1 PID: 7218 at
   drivers/infiniband/hw/mlx5/main.c:2004
		  mlx5_ib_dealloc_ucontext+0x84/0x90 [mlx5_ib]
   CPU: 1 PID: 7218 Comm: ibv_rc_pingpong Tainted: G     E
	       5.2.0-rc6+ #13
   Call Trace:
   uverbs_destroy_ufile_hw+0xb5/0x120 [ib_uverbs]
   ib_uverbs_close+0x1f/0x80 [ib_uverbs]
   __fput+0xbe/0x250
   task_work_run+0x88/0xa0
   do_exit+0x2cb/0xc30
   ? __fput+0x14b/0x250
   do_group_exit+0x39/0xb0
   get_signal+0x191/0x920
   ? _raw_spin_unlock_bh+0xa/0x20
   ? inet_csk_accept+0x229/0x2f0
   do_signal+0x36/0x5e0
   ? put_unused_fd+0x5b/0x70
   ? __sys_accept4+0x1a6/0x1e0
   ? inet_hash+0x35/0x40
   ? release_sock+0x43/0x90
   ? _raw_spin_unlock_bh+0xa/0x20
   ? inet_listen+0x9f/0x120
   exit_to_usermode_loop+0x5c/0xc6
   do_syscall_64+0x182/0x1b0
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 81713d3788 ("IB/mlx5: Add implicit MR support")
Link: https://lore.kernel.org/r/20190805083010.21777-1-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-08-07 15:36:43 -03:00
Chuhong Yuan 94f3e14e00 mlx5: Use refcount_t for refcount
Reference counters are preferred to use refcount_t instead of
atomic_t.
This is because the implementation of refcount_t can prevent
overflows and detect possible use-after-free.
So convert atomic_t ref counters to refcount_t.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-08-07 11:01:48 -07:00
Mark Zhang 7084ed30ae IB/mlx5: Support MLX5_CMD_OP_QUERY_LAG as a DEVX general command
The "MLX5_CMD_OP_QUERY_LAG" is one of the DEVX general commands, add it.

Fixes: 8aa8c95ce4 ("IB/mlx5: Add support for DEVX general command")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
2019-08-04 11:24:48 +03:00
Leon Romanovsky 23eaf3b5c1 RDMA/mlx5: Release locks during notifier unregister
The below kernel panic was observed when created bond mode LACP
with GRE tunnel on top. The reason to it was not released spinlock
during mlx5 notify unregsiter sequence.

[  234.562007] BUG: scheduling while atomic: sh/10900/0x00000002
[  234.563005] Preemption disabled at:
[  234.566864] ------------[ cut here ]------------
[  234.567120] DEBUG_LOCKS_WARN_ON(val > preempt_count())
[  234.567139] WARNING: CPU: 16 PID: 10900 at kernel/sched/core.c:3203 preempt_count_sub+0xca/0x170
[  234.569550] CPU: 16 PID: 10900 Comm: sh Tainted: G        W 5.2.0-rc1-for-linust-dbg-2019-05-25_04-57-33-60 #1
[  234.569886] Hardware name: Dell Inc. PowerEdge R720/0X3D66, BIOS 2.6.1 02/12/2018
[  234.570183] RIP: 0010:preempt_count_sub+0xca/0x170
[  234.570404] Code: 03 38
d0 7c 08 84 d2 0f 85 b0 00 00 00 8b 15 dd 02 03 04 85 d2 75 ba 48 c7 c6
00 e1 88 83 48 c7 c7 40 e1 88 83 e8 76 11 f7 ff <0f> 0b 5b c3 65 8b 05
d3 1f d8 7e 84 c0 75 82 e8 62 c3 c3 00 85 c0
[  234.570911] RSP: 0018:ffff888b94477b08 EFLAGS: 00010286
[  234.571133] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[  234.571391] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000246
[  234.571648] RBP: ffff888ba5560000 R08: fffffbfff08962d5 R09: fffffbfff08962d5
[  234.571902] R10: 0000000000000001 R11: fffffbfff08962d4 R12: ffff888bac6e9548
[  234.572157] R13: ffff888babfaf728 R14: ffff888bac6e9568 R15: ffff888babfaf750
[  234.572412] FS: 00007fcafa59b740(0000) GS:ffff888bed200000(0000) knlGS:0000000000000000
[  234.572686] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  234.572914] CR2: 00007f984f16b140 CR3: 0000000b2bf0a001 CR4: 00000000001606e0
[  234.573172] Call Trace:
[  234.573336] _raw_spin_unlock+0x2e/0x50
[  234.573542] mlx5_ib_unbind_slave_port+0x1bc/0x690 [mlx5_ib]
[  234.573793] mlx5_ib_cleanup_multiport_master+0x1d3/0x660 [mlx5_ib]
[  234.574039] mlx5_ib_stage_init_cleanup+0x4c/0x360 [mlx5_ib]
[  234.574271]  ? kfree+0xf5/0x2f0
[  234.574465] __mlx5_ib_remove+0x61/0xd0 [mlx5_ib]
[  234.574688]  ? __mlx5_ib_remove+0xd0/0xd0 [mlx5_ib]
[  234.574951] mlx5_remove_device+0x234/0x300 [mlx5_core]
[  234.575224] mlx5_unregister_device+0x4d/0x1e0 [mlx5_core]
[  234.575493] remove_one+0x4f/0x160 [mlx5_core]
[  234.575704] pci_device_remove+0xef/0x2a0
[  234.581407]  ? pcibios_free_irq+0x10/0x10
[  234.587143]  ? up_read+0xc1/0x260
[  234.592785] device_release_driver_internal+0x1ab/0x430
[  234.598442] unbind_store+0x152/0x200
[  234.604064]  ? sysfs_kf_write+0x3b/0x180
[  234.609441]  ? sysfs_file_ops+0x160/0x160
[  234.615021] kernfs_fop_write+0x277/0x440
[  234.620288]  ? __sb_start_write+0x1ef/0x2c0
[  234.625512] vfs_write+0x15e/0x460
[  234.630786] ksys_write+0x156/0x1e0
[  234.635988]  ? __ia32_sys_read+0xb0/0xb0
[  234.641120]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[  234.646163] do_syscall_64+0x95/0x470
[  234.651106] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  234.656004] RIP: 0033:0x7fcaf9c9cfd0
[  234.660686] Code: 73 01
c3 48 8b 0d c0 6e 2d 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00
83 3d cd cf 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73
31 c3 48 83 ec 08 e8 ee cb 01 00 48 89 04 24
[  234.670128] RSP: 002b:00007ffd3b01ddd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  234.674811] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007fcaf9c9cfd0
[  234.679387] RDX: 000000000000000d RSI: 00007fcafa5c1000 RDI: 0000000000000001
[  234.683848] RBP: 00007fcafa5c1000 R08: 000000000000000a R09: 00007fcafa59b740
[  234.688167] R10: 00007ffd3b01d8e0 R11: 0000000000000246 R12: 00007fcaf9f75400
[  234.692386] R13: 000000000000000d R14: 0000000000000001 R15: 0000000000000000
[  234.696495] irq event stamp: 153067
[  234.700525] hardirqs last enabled at (153067): [<ffffffff83258c39>] _raw_spin_unlock_irqrestore+0x59/0x70
[  234.704665] hardirqs last disabled at (153066): [<ffffffff83259382>] _raw_spin_lock_irqsave+0x22/0x90
[  234.708722] softirqs last enabled at (153058): [<ffffffff836006c5>] __do_softirq+0x6c5/0xb4e
[  234.712673] softirqs last disabled at (153051): [<ffffffff81227c1d>] irq_exit+0x17d/0x1d0
[  234.716601] ---[ end trace 5dbf096843ee9ce6 ]---

Fixes: df097a278c ("IB/mlx5: Use the new mlx5 core notifier API")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190731083852.584-1-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-08-01 12:41:41 -04:00