Commit 4e045572e2 ("IB/hfi1: Add unique txwait_lock for txreq events")
laid the ground work to support per resource waiting locking.
This patch adds that with a lock unique to each sdma engine and pio
sendcontext and makes necessary changes for verbs, PSM, and vnic to use
the new locks.
This is particularly beneficial for smaller messages that will exhaust
resources at a faster rate.
Fixes: 7724105686 ("IB/hfi1: add driver files")
Reviewed-by: Gary Leshner <Gary.S.Leshner@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Current implementation allows each qp to have only one send engine. As
such, each qp has only one list to queue prebuilt packets when send engine
resources are not available. To improve performance, it is desired to
support multiple send engines for each qp.
This patch creates the framework to support two send engines
(two legs) for each qp for the TID RDMA protocol, which can be easily
extended to support more send engines. It achieves the goal by creating a
leg specific struct, iowait_work in the iowait struct, to hold the
work_struct and the tx_list as well as a pointer to the parent iowait
struct.
The hfi1_pkt_state now has an additional field to record the current legs
work structure and that is now passed to all egress waiters to determine
the leg that needs to wait via a new iowait helper. The APIs are adjusted
to use the new leg specific struct as required.
Many new and modified helpers are added to support this change.
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Hardware limits the maximum number of packets to u16 packets.
Match that size for all relevant sequence numbers in the user_sdma
engine.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current method of allocating MSIx resources is a bit cumbersome,
and not very easily added to.
Refactor and re-order the code paths into a more consistent interface.
Update the interface so that allocations are not order dependent.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
TXREQ defines are duplicated, incompletely, in the sdma header file.
Remove duplicate defines.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When an egress resource(SDMA descriptors, pio credits) is not available,
a sending thread will be put on the resource's wait queue. When the
resource becomes available again, up to a fixed number of sending threads
can be awakened sequentially and removed from the wait queue, depending
on the number of waiting threads and the number of free resources. Since
each awakened sending thread will send as many packets as possible, it
is highly likely that the first sending thread will consume all the
egress resources. Subsequently, it will be put back to the end of the wait
queue. Depending on the timing when the later sending threads wake up,
they may not be able to send any packet and be again put back to the end
of the wait queue sequentially, right behind the first sending thread.
This starvation cycle continues until some sending threads exceed their
retry limit and consequently fail.
This patch fixes the issue by two simple approaches:
(1) Any starved sending thread will be put to the head of the wait queue
while a served sending thread will be put to the tail;
(2) The most starved sending thread will be served first.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix off by 1 error in comments documenting the sdma and send context
mappings.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Short circuit sdma_txclean() by adding an __sdma_txclean()
that is only called when the tx has sdma mappings.
Convert internal calls to __sdma_txclean().
This removes a call from the critical path.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a debugfs sdma_cpu_list file that can be used to examine the CPU to
sdma engine assignments for the whole device.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some users want more control over which cpu cores are being used by the
driver. For example, users might want to restrict the driver to some
specified subset of the cores so that they can appropriately partition
processes, irq handlers, and work threads.
To allow the user to fine tune system affinity settings new sysfs
attributes are introduced per sdma engine. This patch adds a new
attribute type for sdma engine and a new cpu_list attribute.
When the user writes a cpu range to the cpu_list attribute the driver
will create an internal cpu->sdma map, which will be used later as a
look-up table to choose an optimal engine for a user requests.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Reviewed-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Each user SDMA request coming into the driver may contain multiple packets.
Each user packet may use multiple SDMA descriptors to fill the send buffer.
The field seqsubmitted in struct user_sdma_request counts the number of
user packets submitted to an SDMA engine. Sometimes, the intermediate count
may not be updated properly. However, once all the packets' descriptors
are successfully submitted to the SDMA engine, the final count is updated
correctly. But, if only some of the packets are submitted to the engine due
to an error, the intermediate count doesn't reflect the partial number of
packets submitted to the SDMA engine. This can cause a hang later in the
code as the count of packets submitted to the SDMA engine doesn't match the
the count of packets processed by the SDMA engine.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The TODO list for the hfi1 driver was completed during 4.6. In addition
other objections raised (which are far beyond what was in the TODO list)
have been addressed as well. It is now time to remove the driver from
staging and into the drivers/infiniband sub-tree.
Reviewed-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Mike Marciniszyn