Both qi.h and cammalg_qi2.h seem to define identical versions of
MAX_SDLEN. Move it to desc_constr.h to avoid duplication.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Spencer <christopher.spencer@sea.co.uk>
Cc: Cory Tusar <cory.tusar@zii.aero>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Horia Geantă <horia.geanta@nxp.com>
Cc: Aymen Sghaier <aymen.sghaier@nxp.com>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CGRs (Congestion Groups) have to be freed by the same CPU that
initialized them.
This is why currently the driver takes special measures; however, using
set_cpus_allowed_ptr() is incorrect - as reported by Sebastian.
Instead of the generic solution of replacing set_cpus_allowed_ptr() with
work_on_cpu_safe(), we use the qman_delete_cgr_safe() QBMan API instead
of qman_delete_cgr() - which internally takes care of proper CGR
deletion.
Link: https://lkml.kernel.org/r/20181005125443.dfhd2asqktm22ney@linutronix.de
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For more than 16 S/G entries, driver currently corrupts memory
on ARMv8, see below KASAN log.
Note: this does not reproduce on PowerPC due to different (smaller)
cache line size - 64 bytes on PPC vs. 128 bytes on ARMv8.
One such use case is one of the cbc(aes) test vectors - with 8 S/G
entries and src != dst. Driver needs 1 (IV) + 2 x 8 = 17 entries,
which goes over the 16 S/G entries limit:
(CAAM_QI_MEMCACHE_SIZE - offsetof(struct ablkcipher_edesc, sgt)) /
sizeof(struct qm_sg_entry) = 256 / 16 = 16 S/Gs
Fix this by:
-increasing object size in caamqicache pool from 512 to 768; this means
the maximum number of S/G entries grows from (at least) 16 to 32
(again, for ARMv8 case of 128-byte cache line)
-add checks in the driver to fail gracefully (ENOMEM) in case the 32 S/G
entries limit is exceeded
==================================================================
BUG: KASAN: slab-out-of-bounds in ablkcipher_edesc_alloc+0x4ec/0xf60
Write of size 1 at addr ffff800021cb6003 by task cryptomgr_test/1394
CPU: 3 PID: 1394 Comm: cryptomgr_test Not tainted 4.12.0-rc7-next-20170703-00023-g72badbcc1ea7-dirty #26
Hardware name: LS1046A RDB Board (DT)
Call trace:
[<ffff20000808ac6c>] dump_backtrace+0x0/0x290
[<ffff20000808b014>] show_stack+0x14/0x1c
[<ffff200008d62c00>] dump_stack+0xa4/0xc8
[<ffff200008264e40>] print_address_description+0x110/0x26c
[<ffff200008265224>] kasan_report+0x1d0/0x2fc
[<ffff2000082637b8>] __asan_store1+0x4c/0x54
[<ffff200008b4884c>] ablkcipher_edesc_alloc+0x4ec/0xf60
[<ffff200008b49304>] ablkcipher_encrypt+0x44/0xcc
[<ffff20000848a61c>] skcipher_encrypt_ablkcipher+0x120/0x138
[<ffff200008495014>] __test_skcipher+0xaec/0xe30
[<ffff200008497088>] test_skcipher+0x6c/0xd8
[<ffff200008497154>] alg_test_skcipher+0x60/0xe4
[<ffff2000084974c4>] alg_test.part.13+0x130/0x304
[<ffff2000084976d4>] alg_test+0x3c/0x68
[<ffff2000084938ac>] cryptomgr_test+0x54/0x5c
[<ffff20000810276c>] kthread+0x188/0x1c8
[<ffff2000080836c0>] ret_from_fork+0x10/0x50
Allocated by task 1394:
save_stack_trace_tsk+0x0/0x1ac
save_stack_trace+0x18/0x20
kasan_kmalloc.part.5+0x48/0x110
kasan_kmalloc+0x84/0xa0
kasan_slab_alloc+0x14/0x1c
kmem_cache_alloc+0x124/0x1e8
qi_cache_alloc+0x28/0x58
ablkcipher_edesc_alloc+0x244/0xf60
ablkcipher_encrypt+0x44/0xcc
skcipher_encrypt_ablkcipher+0x120/0x138
__test_skcipher+0xaec/0xe30
test_skcipher+0x6c/0xd8
alg_test_skcipher+0x60/0xe4
alg_test.part.13+0x130/0x304
alg_test+0x3c/0x68
cryptomgr_test+0x54/0x5c
kthread+0x188/0x1c8
ret_from_fork+0x10/0x50
Freed by task 0:
(stack is not available)
The buggy address belongs to the object at ffff800021cb5e00
which belongs to the cache caamqicache of size 512
The buggy address is located 3 bytes to the right of
512-byte region [ffff800021cb5e00, ffff800021cb6000)
The buggy address belongs to the page:
page:ffff7e0000872d00 count:1 mapcount:0 mapping: (null)
index:0x0 compound_mapcount: 0
flags: 0xfffc00000008100(slab|head)
raw: 0fffc00000008100 0000000000000000 0000000000000000 0000000180190019
raw: dead000000000100 dead000000000200 ffff800931268200 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff800021cb5f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff800021cb5f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff800021cb6000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff800021cb6080: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff800021cb6100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fixes: b189817cf7 ("crypto: caam/qi - add ablkcipher and authenc algorithms")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CAAM engine supports two interfaces for crypto job submission:
-job ring interface - already existing caam/jr driver
-Queue Interface (QI) - caam/qi driver added in current patch
QI is present in CAAM engines found on DPAA platforms.
QI gets its I/O (frame descriptors) from QMan (Queue Manager) queues.
This patch adds a platform device for accessing CAAM's queue interface.
The requests are submitted to CAAM using one frame queue per
cryptographic context. Each crypto context has one shared descriptor.
This shared descriptor is attached to frame queue associated with
corresponding driver context using context_a.
The driver hides the mechanics of FQ creation, initialisation from its
applications. Each cryptographic context needs to be associated with
driver context which houses the FQ to be used to transport the job to
CAAM. The driver provides API for:
(a) Context creation
(b) Job submission
(c) Context deletion
(d) Congestion indication - whether path to/from CAAM is congested
The driver supports affining its context to a particular CPU.
This means that any responses from CAAM for the context in question
would arrive at the given CPU. This helps in implementing one CPU
per packet round trip in IPsec application.
The driver processes CAAM responses under NAPI contexts.
NAPI contexts are instantiated only on cores with affined portals since
only cores having their own portal can receive responses from DQRR.
The responses from CAAM for all cryptographic contexts ride on a fixed
set of FQs. We use one response FQ per portal owning core. The response
FQ is configured in each core's and thus portal's dedicated channel.
This gives the flexibility to direct CAAM's responses for a crypto
context on a given core.
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Andrey Smirnov