Commit Graph

627 Commits

Author SHA1 Message Date
Jianping Liu 3154060704 tkernel: sync code to the same with tk4 pub/lts/0017-kabi
Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue
and wujing. Partners can submit pull requests to this branch, and we
can pick the commits to tk4 pub/lts/0017-kabi easly.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-12 13:13:20 +08:00
Jianping Liu c62d6b571d ock: sync codes to ock 5.4.119-20.0009.21
Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.

Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
2024-06-11 20:27:38 +08:00
Christoph Hellwig df41017eaf ia64: remove support for machvecs
The only thing remaining of the machvecs is a few checks if we are
running on an SGI UV system.  Replace those with the existing
is_uv_system() check that has been rewritten to simply check the
OEM ID directly.

That leaves us with a generic kernel that is as fast as the previous
DIG/ZX1/UV kernels, but can support all hardware.  Support for UV
and the HP SBA IOMMU is now optional based on new config options.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-27-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16 14:32:26 -07:00
Christoph Hellwig df43acac8e ia64: remove the zx1 swiotlb machvec
The aim of this machvec is to support devices with < 32-bit dma
masks.  But given that ia64 only has a ZONE_DMA32 and not a ZONE_DMA
that isn't supported by swiotlb either.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-21-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16 11:33:57 -07:00
Christoph Hellwig defdeacb1b char/agp: remove the sgi-agp driver
The SGI SN2 support is about to be removed.  Remove this driver that
depends on the SN2 support.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20190813072514.23299-4-hch@lst.de
Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-16 11:33:56 -07:00
Linus Torvalds e0e86b111b Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP/hotplug updates from Thomas Gleixner:
 "A small set of updates for SMP and CPU hotplug:

   - Abort disabling secondary CPUs in the freezer when a wakeup is
     pending instead of evaluating it only after all CPUs have been
     offlined.

   - Remove the shared annotation for the strict per CPU cfd_data in the
     smp function call core code.

   - Remove the return values of smp_call_function() and on_each_cpu()
     as they are unconditionally 0. Fixup the few callers which actually
     bothered to check the return value"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  smp: Remove smp_call_function() and on_each_cpu() return values
  smp: Do not mark call_function_data as shared
  cpu/hotplug: Abort disabling secondary CPUs if wakeup is pending
  cpu/hotplug: Fix notify_cpu_starting() reference in bringup_wait_for_ap()
2019-07-08 10:39:56 -07:00
Nadav Amit caa759323c smp: Remove smp_call_function() and on_each_cpu() return values
The return value is fixed. Remove it and amend the callers.

[ tglx: Fixup arm/bL_switcher and powerpc/rtas ]

Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20190613064813.8102-2-namit@vmware.com
2019-06-23 14:26:26 +02:00
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Thomas Gleixner 09c434b8a0 treewide: Add SPDX license identifier for more missed files
Add SPDX license identifiers to all files which:

 - Have no license information of any form

 - Have MODULE_LICENCE("GPL*") inside which was used in the initial
   scan/conversion to ignore the file

These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:

  GPL-2.0-only

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21 10:50:45 +02:00
David Hildenbrand 750b317f85 agp: efficeon: no need to set PG_reserved on GATT tables
Patch series "mm: PG_reserved cleanups and documentation", v2.

I was recently going over all users of PG_reserved.  Short story: it is
difficult and sometimes not really clear if setting/checking for
PG_reserved is only a relict from the past.  Easy to break things.  I
guess I now have a pretty good idea wh things are like that nowadays and
how they evolved.

I had way more cleanups in this series inititally, but some
architectures take PG_reserved as a way to apply a different caching
strategy (for MMIO pages).  So I decided to only include the most
obvious changes (that are less likely to break something).  So the big
chunk of manual SetPageReserved users are MMIO/DMA related things on
device buffers.

Most notably, for device memory we will hopefully soon stop setting
PG_reserved.  Then the documentation has to be updated.

This patch (of 9):

The l1 GATT page table is kept in a special on-chip page with 64
entries.  We allocate the l2 page table pages via get_zeroed_page() and
enter them into the table.  These l2 pages are modified accordingly when
inserting/removing memory via efficeon_insert_memory and
efficeon_remove_memory.

Apart from that, these pages are not exposed or ioremap'ed.  We can stop
setting them reserved (propably copied from generic code).

Link: http://lkml.kernel.org/r/20190114125903.24845-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-05 21:07:18 -08:00
Arun KS ca79b0c211 mm: convert totalram_pages and totalhigh_pages variables to atomic
totalram_pages and totalhigh_pages are made static inline function.

Main motivation was that managed_page_count_lock handling was complicating
things.  It was discussed in length here,
https://lore.kernel.org/patchwork/patch/995739/#1181785 So it seemes
better to remove the lock and convert variables to atomic, with preventing
poteintial store-to-read tearing as a bonus.

[akpm@linux-foundation.org: coding style fixes]
Link: http://lkml.kernel.org/r/1542090790-21750-4-git-send-email-arunks@codeaurora.org
Signed-off-by: Arun KS <arunks@codeaurora.org>
Suggested-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-28 12:11:47 -08:00
Gustavo A. R. Silva 572d8fda26 char: amd64-agp: Use 64-bit arithmetic instead of 32-bit
Cast *tmp* and *nb_base* to u64 in order to give the compiler
complete information about the proper arithmetic to use.

Notice that such variables are used in contexts that expect
expressions of type u64 (64 bits, unsigned) and the following
expressions are currently being evaluated using 32-bit arithmetic:

tmp << 25
nb_base << 25

Addresses-Coverity-ID: 200586 ("Unintentional integer overflow")
Addresses-Coverity-ID: 200587 ("Unintentional integer overflow")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-10 13:50:31 +10:00
Souptick Joarder 8fb8876b2d char: agp: Change return type to vm_fault_t
Use new return type vm_fault_t for fault handler. For now,
this is just documenting that the function returns a
VM_FAULT value rather than an errno. Once all instances are
converted, vm_fault_t will become a distinct type.

Ref-> commit 1c8f422059 ("mm: change return type to
vm_fault_t") was added in 4.17-rc1 to introduce the new
typedef vm_fault_t. Currently we are making change to all
drivers to return vm_fault_t for page fault handlers. As
part of that char/agp driver is also getting changed to
return vm_fault_t type from fault handler.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-10 13:48:11 +10:00
Kees Cook 6396bb2215 treewide: kzalloc() -> kcalloc()
The kzalloc() function has a 2-factor argument form, kcalloc(). This
patch replaces cases of:

        kzalloc(a * b, gfp)

with:
        kcalloc(a * b, gfp)

as well as handling cases of:

        kzalloc(a * b * c, gfp)

with:

        kzalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kzalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kzalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kzalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kzalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kzalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kzalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kzalloc
+ kcalloc
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kzalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kzalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kzalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kzalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kzalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kzalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kzalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kzalloc(sizeof(THING) * C2, ...)
|
  kzalloc(sizeof(TYPE) * C2, ...)
|
  kzalloc(C1 * C2 * C3, ...)
|
  kzalloc(C1 * C2, ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kzalloc
+ kcalloc
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Kees Cook 6da2ec5605 treewide: kmalloc() -> kmalloc_array()
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
patch replaces cases of:

        kmalloc(a * b, gfp)

with:
        kmalloc_array(a * b, gfp)

as well as handling cases of:

        kmalloc(a * b * c, gfp)

with:

        kmalloc(array3_size(a, b, c), gfp)

as it's slightly less ugly than:

        kmalloc_array(array_size(a, b), c, gfp)

This does, however, attempt to ignore constant size factors like:

        kmalloc(4 * 1024, gfp)

though any constants defined via macros get caught up in the conversion.

Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.

The tools/ directory was manually excluded, since it has its own
implementation of kmalloc().

The Coccinelle script used for this was:

// Fix redundant parens around sizeof().
@@
type TYPE;
expression THING, E;
@@

(
  kmalloc(
-	(sizeof(TYPE)) * E
+	sizeof(TYPE) * E
  , ...)
|
  kmalloc(
-	(sizeof(THING)) * E
+	sizeof(THING) * E
  , ...)
)

// Drop single-byte sizes and redundant parens.
@@
expression COUNT;
typedef u8;
typedef __u8;
@@

(
  kmalloc(
-	sizeof(u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * (COUNT)
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(__u8) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(char) * COUNT
+	COUNT
  , ...)
|
  kmalloc(
-	sizeof(unsigned char) * COUNT
+	COUNT
  , ...)
)

// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@

(
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_ID)
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_ID
+	COUNT_ID, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (COUNT_CONST)
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * COUNT_CONST
+	COUNT_CONST, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_ID)
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_ID
+	COUNT_ID, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (COUNT_CONST)
+	COUNT_CONST, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * COUNT_CONST
+	COUNT_CONST, sizeof(THING)
  , ...)
)

// 2-factor product, only identifiers.
@@
identifier SIZE, COUNT;
@@

- kmalloc
+ kmalloc_array
  (
-	SIZE * COUNT
+	COUNT, SIZE
  , ...)

// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@

(
  kmalloc(
-	sizeof(TYPE) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(TYPE) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(TYPE))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * (COUNT) * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * (STRIDE)
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
|
  kmalloc(
-	sizeof(THING) * COUNT * STRIDE
+	array3_size(COUNT, STRIDE, sizeof(THING))
  , ...)
)

// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@

(
  kmalloc(
-	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(THING1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * COUNT
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
|
  kmalloc(
-	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
  , ...)
)

// 3-factor product, only identifiers, with redundant parens removed.
@@
identifier STRIDE, SIZE, COUNT;
@@

(
  kmalloc(
-	(COUNT) * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * STRIDE * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	(COUNT) * (STRIDE) * (SIZE)
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
|
  kmalloc(
-	COUNT * STRIDE * SIZE
+	array3_size(COUNT, STRIDE, SIZE)
  , ...)
)

// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression E1, E2, E3;
constant C1, C2, C3;
@@

(
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(
-	(E1) * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * E3
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	(E1) * (E2) * (E3)
+	array3_size(E1, E2, E3)
  , ...)
|
  kmalloc(
-	E1 * E2 * E3
+	array3_size(E1, E2, E3)
  , ...)
)

// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@

(
  kmalloc(sizeof(THING) * C2, ...)
|
  kmalloc(sizeof(TYPE) * C2, ...)
|
  kmalloc(C1 * C2 * C3, ...)
|
  kmalloc(C1 * C2, ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * (E2)
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(TYPE) * E2
+	E2, sizeof(TYPE)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * (E2)
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	sizeof(THING) * E2
+	E2, sizeof(THING)
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * E2
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	(E1) * (E2)
+	E1, E2
  , ...)
|
- kmalloc
+ kmalloc_array
  (
-	E1 * E2
+	E1, E2
  , ...)
)

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 16:19:22 -07:00
Mathieu Malaterre dec60f3a9b agp: uninorth: make two functions static
Both ‘uninorth_remove_memory’ and ‘null_cache_flush’ can be made
static. So make them.

Silence the following gcc warning (W=1):

  drivers/char/agp/uninorth-agp.c:198:5: warning: no previous prototype for ‘uninorth_remove_memory’ [-Wmissing-prototypes]

and

  drivers/char/agp/uninorth-agp.c:473:6: warning: no previous prototype for ‘null_cache_flush’ [-Wmissing-prototypes]

Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-05-10 11:26:08 +10:00
Linus Torvalds 105cf3c8c6 pci-v4.16-changes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJad5lgAAoJEFmIoMA60/r8s2kQAI3PztawDpaCP9Z12pkbBHSt
 Ho0xTyk9rCZi9kQJbNjc+a+QrlA3QmTHXIXerB3LSWoh7M+XhsECjem92eHpgLNS
 JvYPhTfOrCr0vdiAmOz6hD0AqN/psrbfzgiJhSwomsGEFS77k7kERSJckRv81sxb
 Aj5F/WjucAgLorwm4auveAJEQ7atE7/6pkXzoqYm4G6NLOb46jUcRGndrnvXZBlz
 fws8fBM4BHyi7i25CYQl24tFq1CGax1rIPgLg+4KnH76bQk/N6Ju0sGVSzfh+hG8
 SIerK9bJbzGRAuNKoxB3aO1dyzsK3x9WztE2mG98w5trOISPIR1FqnvC/225FWAU
 d6eIXiC7wKnEx+DElNTzCjzfHc7SAJoupO32H7CoiTe5zPUlWlxJ1zLYkK1gt50q
 m8PRBiYTglxyznzrO0drtcdjEzvbdZNRrsYnul4wi1vSHzjk6F6XLtzT10XWM1M1
 1pXLB8384FTj0Hu4bq6Y3Aivkmz0Sf+eQM2NaOwe+Zj7/1VV0d3lvi4LUXkqzLCA
 FoXPJSMxG2Qu+iflCeYRQBJjExaZH3eNLZ3dT6QpcJrjaFVedd9u5DeeFqNL27zV
 bhr8TdqrR4p4rc8EBAGoCapw96IxLZROKB3gxbrZVOpfIZpzthwHbElHX6aqUgF4
 w/EV1JWs36WXWaxFk8wd
 =ttq9
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - skip AER driver error recovery callbacks for correctable errors
   reported via ACPI APEI, as we already do for errors reported via the
   native path (Tyler Baicar)

 - fix DPC shared interrupt handling (Alex Williamson)

 - print full DPC interrupt number (Keith Busch)

 - enable DPC only if AER is available (Keith Busch)

 - simplify DPC code (Bjorn Helgaas)

 - calculate ASPM L1 substate parameter instead of hardcoding it (Bjorn
   Helgaas)

 - enable Latency Tolerance Reporting for ASPM L1 substates (Bjorn
   Helgaas)

 - move ASPM internal interfaces out of public header (Bjorn Helgaas)

 - allow hot-removal of VGA devices (Mika Westerberg)

 - speed up unplug and shutdown by assuming Thunderbolt controllers
   don't support Command Completed events (Lukas Wunner)

 - add AtomicOps support for GPU and Infiniband drivers (Felix Kuehling,
   Jay Cornwall)

 - expose "ari_enabled" in sysfs to help NIC naming (Stuart Hayes)

 - clean up PCI DMA interface usage (Christoph Hellwig)

 - remove PCI pool API (replaced with DMA pool) (Romain Perier)

 - deprecate pci_get_bus_and_slot(), which assumed PCI domain 0 (Sinan
   Kaya)

 - move DT PCI code from drivers/of/ to drivers/pci/ (Rob Herring)

 - add PCI-specific wrappers for dev_info(), etc (Frederick Lawler)

 - remove warnings on sysfs mmap failure (Bjorn Helgaas)

 - quiet ROM validation messages (Alex Deucher)

 - remove redundant memory alloc failure messages (Markus Elfring)

 - fill in types for compile-time VGA and other I/O port resources
   (Bjorn Helgaas)

 - make "pci=pcie_scan_all" work for Root Ports as well as Downstream
   Ports to help AmigaOne X1000 (Bjorn Helgaas)

 - add SPDX tags to all PCI files (Bjorn Helgaas)

 - quirk Marvell 9128 DMA aliases (Alex Williamson)

 - quirk broken INTx disable on Ceton InfiniTV4 (Bjorn Helgaas)

 - fix CONFIG_PCI=n build by adding dummy pci_irqd_intx_xlate() (Niklas
   Cassel)

 - use DMA API to get MSI address for DesignWare IP (Niklas Cassel)

 - fix endpoint-mode DMA mask configuration (Kishon Vijay Abraham I)

 - fix ARTPEC-6 incorrect IS_ERR() usage (Wei Yongjun)

 - add support for ARTPEC-7 SoC (Niklas Cassel)

 - add endpoint-mode support for ARTPEC (Niklas Cassel)

 - add Cadence PCIe host and endpoint controller driver (Cyrille
   Pitchen)

 - handle multiple INTx status bits being set in dra7xx (Vignesh R)

 - translate dra7xx hwirq range to fix INTD handling (Vignesh R)

 - remove deprecated Exynos PHY initialization code (Jaehoon Chung)

 - fix MSI erratum workaround for HiSilicon Hip06/Hip07 (Dongdong Liu)

 - fix NULL pointer dereference in iProc BCMA driver (Ray Jui)

 - fix Keystone interrupt-controller-node lookup (Johan Hovold)

 - constify qcom driver structures (Julia Lawall)

 - rework Tegra config space mapping to increase space available for
   endpoints (Vidya Sagar)

 - simplify Tegra driver by using bus->sysdata (Manikanta Maddireddy)

 - remove PCI_REASSIGN_ALL_BUS usage on Tegra (Manikanta Maddireddy)

 - add support for Global Fabric Manager Server (GFMS) event to
   Microsemi Switchtec switch driver (Logan Gunthorpe)

 - add IDs for Switchtec PSX 24xG3 and PSX 48xG3 (Kelvin Cao)

* tag 'pci-v4.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI: cadence: Add EndPoint Controller driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe endpoint controller
  PCI: endpoint: Fix EPF device name to support multi-function devices
  PCI: endpoint: Add the function number as argument to EPC ops
  PCI: cadence: Add host driver for Cadence PCIe controller
  dt-bindings: PCI: cadence: Add DT bindings for Cadence PCIe host controller
  PCI: Add vendor ID for Cadence
  PCI: Add generic function to probe PCI host controllers
  PCI: generic: fix missing call of pci_free_resource_list()
  PCI: OF: Add generic function to parse and allocate PCI resources
  PCI: Regroup all PCI related entries into drivers/pci/Makefile
  PCI/DPC: Reformat DPC register definitions
  PCI/DPC: Add and use DPC Status register field definitions
  PCI/DPC: Squash dpc_rp_pio_get_info() into dpc_process_rp_pio_error()
  PCI/DPC: Remove unnecessary RP PIO register structs
  PCI/DPC: Push dpc->rp_pio_status assignment into dpc_rp_pio_get_info()
  PCI/DPC: Squash dpc_rp_pio_print_error() into dpc_rp_pio_get_info()
  PCI/DPC: Make RP PIO log size check more generic
  PCI/DPC: Rename local "status" to "dpc_status"
  PCI/DPC: Squash dpc_rp_pio_print_tlp_header() into dpc_rp_pio_print_error()
  ...
2018-02-06 09:59:40 -08:00
Sinan Kaya 067ddab544 agp: sworks: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.

Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().

Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-01-11 17:25:15 -06:00
Sinan Kaya 84f8cbf748 agp: nvidia: Deprecate pci_get_bus_and_slot()
pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as
where a PCI device is present. This restricts the device drivers to be
reused for other domain numbers.

Getting ready to remove pci_get_bus_and_slot() function in favor of
pci_get_domain_bus_and_slot().

Replace pci_get_bus_and_slot() with pci_get_domain_bus_and_slot()
and extract the domain number from struct pci_dev.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-01-11 17:23:50 -06:00
Matthew Auld b7128ef125 drm/i915: prefer resource_size_t for everything stolen
Keeps things consistent now that we make use of struct resource. This
should keep us covered in case we ever get huge amounts of stolen
memory.

v2: bunch of missing conversions (Chris)

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-10-matthew.auld@intel.com
2017-12-12 12:30:22 +02:00
Matthew Auld 7789422665 drm/i915: make dsm struct resource centric
Now that we are using struct resource to track the stolen region, it is
more convenient if we track dsm in a resource as well.

v2: check range_overflow when writing to 32b registers (Chris)
    pepper in some comments (Chris)
v3: refit i915_stolen_to_dma()
v4: kill ggtt->stolen_size
v5: some more polish

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171211151822.20953-6-matthew.auld@intel.com
2017-12-12 12:30:19 +02:00
Chris Wilson 8516673a99 agp/intel: Flush all chipset writes after updating the GGTT
Before accessing the GGTT we must flush the PTE writes and make them
visible to the chipset, or else the indirect access may end up in the
wrong page. In commit 3497971a71 ("agp/intel: Flush chipset writes
after updating a single PTE"), we noticed corruption of the uploads for
pwrite and for capturing GPU error states, but it was presumed that the
explicit calls to intel_gtt_chipset_flush() were sufficient for the
execbuffer path. However, we have not been flushing the chipset between
the PTE writes and access via the GTT itself.

For simplicity, do the flush after any PTE update rather than try and
batch the flushes on a just-in-time basis.

References: 3497971a71 ("agp/intel: Flush chipset writes after updating a single PTE")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.uk
2017-12-11 11:00:40 +00:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Arvind Yadav d720661291 agp: nvidia: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:50 +10:00
Arvind Yadav 75383dd348 agp: amd64: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:49 +10:00
Arvind Yadav f2149f0af3 agp: sis: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:48 +10:00
Arvind Yadav 0fa02c658a agp: efficeon: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:48 +10:00
Arvind Yadav 11cdae9a5f agp: ati: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:47 +10:00
Arvind Yadav e4e22911b3 agp: ali: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:47 +10:00
Arvind Yadav 84a6bf7fd7 agp: intel: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:46 +10:00
Arvind Yadav b8ca53f4d0 agp: amd-k7: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:45 +10:00
Arvind Yadav ba67a31aac agp: uninorth: constify pci_device_id.
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-04 16:59:43 +10:00
Laura Abbott e47036b45a agp: use set_memory.h header
set_memory_* functions have moved to set_memory.h.  Switch to this
explicitly.

Link: http://lkml.kernel.org/r/1488920133-27229-7-git-send-email-labbott@redhat.com
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Michal Hocko 752ade68cb treewide: use kv[mz]alloc* rather than opencoded variants
There are many code paths opencoding kvmalloc.  Let's use the helper
instead.  The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator.  E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation.  This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously.  There is no guarantee something like that happens
though.

This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.

Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-05-08 17:15:13 -07:00
Linus Torvalds 2f34c1231b main drm pull request for 4.12 kernel
-----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJZCTzvAAoJEAx081l5xIa+9kcQAJsQiija4/7QGx6IzakOMqjx
 WulJ3zYG/cU/HLwCBcuWRDF6wAj+7iWNeLCPmolHwEazcI8tQVdgMlWtbdMbDh8U
 ckzD3FBXsEVfIfab+u6tyoUkm3l/VDhMXbjkUK7NTo/+dkRqe5LuFfZPCGN09jft
 Y+5salkRXzDhXPSFsqmjfzhx1v7PTgf0a5HUenKWEWOv+sJQaW4/iPvcDSIcg5qR
 l9WjAqro1NpFYhUodnh6DkLeledL1U5whdtp/yvrUAck8y+WP/jwGYmQ7pZ0UkQm
 f0M3kV6K67ox9eqN++jsGX5o8sB1qF01Uh95kBAnyzYzsw4ZlMCx6pV7PDX+J88M
 UBNMEqX10hrLkNJA9lGjPWx+/6fudcwg9anKvTRO3Uyx7MbYoJAgjzAM+yBqqtV0
 8Otxa4Bw0V2pmUD+0lqJDERRvE77VCXkLb8SaI5lQo0MHpQqT2cZA+GD+B+rZHO6
 Ie5LDFY87vM2GG1IECufG+xOa3v6sn2FfQ1ouu1KNGKOAMBKcQCQyQx3kGVuNW2i
 HDACVXALJgXdRlVLm4jydOCZdRoguX7AWmRjtdwxgaO+lBcGfLhkXdjLQ7Ho+29p
 32ArJfkZPfA53vMB6lHxAfbtrs1q2RzyVnPHj/KqeJnGZbABKTsF2HQ5BQc4Xq/J
 mqXoz6Oubdvk4Pwyx7Ne
 =UxFF
 -----END PGP SIGNATURE-----

Merge tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux

Pull drm u pdates from Dave Airlie:
 "This is the main drm pull request for v4.12. Apart from two fixes
  pulls, everything should have been in drm-next for at least 2 weeks.

  The biggest thing in here is AMD released the public headers for their
  upcoming VEGA GPUs. These as always are quite a sizeable chunk of
  header files. They've also added initial non-display support for those
  GPUs, though they aren't available in production yet.

  Otherwise it's pretty much normal.

  New bridge drivers:
   - megachips-stdpxxxx-ge-b850v3-fw LVDS->DP++
   - generic LVDS bridge support.

  Core:
   - Displayport link train failure reporting to userspace
   - debugfs interface cleaned up
   - subsystem TODO in kerneldoc now
   - Extended fbdev support (flipping and vblank wait)
   - drm_platform removed
   - EDP CRC support in helper
   - HF-VSDB SCDC support in EDID parser
   - Lots of code cleanups and header extraction
   - Thunderbolt external GPU awareness
   - Atomic helper improvements
   - Documentation improvements

  panel:
   - Sitronix and Samsung new panel support

  amdgpu:
   - Preliminary vega10 support
   - Multi-level page table support
   - GPU sensor support for userspace
   - PRT support for sparse buffers
   - SR-IOV improvements
   - Non-contig VRAM CPU mapping

  i915:
   - Atomic modesetting enabled by default on Gen5+
   - LSPCON improvements
   - Atomic state handling for cdclk
   - GPU reset improvements
   - In-kernel unit tests
   - Geminilake improvements and color manager support
   - Designware i2c fixes
   - vblank evasion improvements
   - Hotplug safe connector iterators
   - GVT scheduler QoS support
   - GVT Kabylake support

  nouveau:
   - Acceleration support for Pascal (GP10x).
   - Rearchitecture of code handling proprietary signed firmware
   - Fix GTX 970 with odd MMU configuration
   - GP10B support
   - GP107 acceleration support

  vmwgfx:
   - Atomic modesetting support for vmwgfx

  omapdrm:
   - Support for render nodes
   - Refactor omapdss code
   - Fix some probe ordering issues
   - Fix too dark RGB565 rendering

  sunxi:
   - prelim rework for multiple pipes.

  mali-dp:
   - Color management support
   - Plane scaling
   - Power management improvements

  imx-drm:
   - Prefetch Resolve Engine/Gasket on i.MX6QP
   - Deferred plane disabling
   - Separate alpha support

  mediatek:
   - Mediatek SoC MT2701 support

  rcar-du:
   - Gen3 HDMI support

  msm:
   - 4k support for newer chips
   - OPP bindings for gpu
   - prep work for per-process pagetables

  vc4:
   - HDMI audio support
   - fixes

  qxl:
   - minor fixes.

  dw-hdmi:
   - PHY improvements
   - CSC fixes
   - Amlogic GX SoC support"

* tag 'drm-for-v4.12' of git://people.freedesktop.org/~airlied/linux: (1778 commits)
  drm/nouveau/fb/gf100-: Fix 32 bit wraparound in new ram detection
  drm/nouveau/secboot/gm20b: fix the error return code in gm20b_secboot_tegra_read_wpr()
  drm/nouveau/kms: Increase max retries in scanout position queries.
  drm/nouveau/bios/bitP: check that table is long enough for optional pointers
  drm/nouveau/fifo/nv40: no ctxsw for pre-nv44 mpeg engine
  drm: mali-dp: use div_u64 for expensive 64-bit divisions
  drm/i915: Confirm the request is still active before adding it to the await
  drm/i915: Avoid busy-spinning on VLV_GLTC_PW_STATUS mmio
  drm/i915/selftests: Allocate inode/file dynamically
  drm/i915: Fix system hang with EI UP masked on Haswell
  drm/i915: checking for NULL instead of IS_ERR() in mock selftests
  drm/i915: Perform link quality check unconditionally during long pulse
  drm/i915: Fix use after free in lpe_audio_platdev_destroy()
  drm/i915: Use the right mapping_gfp_mask for final shmem allocation
  drm/i915: Make legacy cursor updates more unsynced
  drm/i915: Apply a cond_resched() to the saturated signaler
  drm/i915: Park the signaler before sleeping
  drm: mali-dp: Check the mclk rate and allow up/down scaling
  drm: mali-dp: Enable image enhancement when scaling
  drm: mali-dp: Add plane upscaling support
  ...
2017-05-03 11:44:24 -07:00
Dave Airlie 2e16101780 Merge tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel into drm-next
4 weeks worth of stuff since I was traveling&lazy:

- lspcon improvements (Imre)
- proper atomic state for cdclk handling (Ville)
- gpu reset improvements (Chris)
- lots and lots of polish around fences, requests, waiting and
  everything related all over (both gem and modeset code), from Chris
- atomic by default on gen5+ minus byt/bsw (Maarten did the patch to
  flip the default, really this is a massive joint team effort)
- moar power domains, now 64bit (Ander)
- big pile of in-kernel unit tests for various gem subsystems (Chris),
  including simple mock objects for i915 device and and the ggtt
  manager.
- i915_gpu_info in debugfs, for taking a snapshot of the current gpu
  state. Same thing as i915_error_state, but useful if the kernel didn't
  notice something is stick. From Chris.
- bxt dsi fixes (Umar Shankar)
- bxt w/a updates (Jani)
- no more struct_mutex for gem object unreference (Chris)
- some execlist refactoring (Tvrtko)
- color manager support for glk (Ander)
- improve the power-well sync code to better take over from the
  firmware (Imre)
- gem tracepoint polish (Tvrtko)
- lots of glk fixes all around (Ander)
- ctx switch improvements (Chris)
- glk dsi support&fixes (Deepak M)
- dsi fixes for vlv and clanups, lots of them (Hans de Goede)
- switch to i915.ko types in lots of our internal modeset code (Ander)
- byt/bsw atomic wm update code, yay (Ville)

* tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel: (432 commits)
  drm/i915: Update DRIVER_DATE to 20170306
  drm/i915: Don't use enums for hardware engine id
  drm/i915: Split breadcrumbs spinlock into two
  drm/i915: Refactor wakeup of the next breadcrumb waiter
  drm/i915: Take reference for signaling the request from hardirq
  drm/i915: Add FIFO underrun tracepoints
  drm/i915: Add cxsr toggle tracepoint
  drm/i915: Add VLV/CHV watermark/FIFO programming tracepoints
  drm/i915: Add plane update/disable tracepoints
  drm/i915: Kill level 0 wm hack for VLV/CHV
  drm/i915: Workaround VLV/CHV sprite1->sprite0 enable underrun
  drm/i915: Sanitize VLV/CHV watermarks properly
  drm/i915: Only use update_wm_{pre,post} for pre-ilk platforms
  drm/i915: Nuke crtc->wm.cxsr_allowed
  drm/i915: Compute proper intermediate wms for vlv/cvh
  drm/i915: Skip useless watermark/FIFO related work on VLV/CHV when not needed
  drm/i915: Compute vlv/chv wms the atomic way
  drm/i915: Compute VLV/CHV FIFO sizes based on the PM2 watermarks
  drm/i915: Plop vlv/chv fifo sizes into crtc state
  drm/i915: Plop vlv wm state into crtc_state
  ...
2017-03-08 12:41:47 +10:00
Ingo Molnar 0871d5a66d Merge branch 'linus' into WIP.x86/boot, to fix up conflicts and to pick up updates
Conflicts:
	arch/x86/xen/setup.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-01 09:02:26 +01:00
Dave Jiang 11bac80004 mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmf
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to
take a vma and vmf parameter when the vma already resides in vmf.

Remove the vma parameter to simplify things.

[arnd@arndb.de: fix ARM build]
  Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de
Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-24 17:46:54 -08:00
Ingo Molnar 66441bd3cf x86/boot/e820: Move asm/e820.h to asm/e820/api.h
In line with asm/e820/types.h, move the e820 API declarations to
asm/e820/api.h and update all usage sites.

This is just a mechanical, obviously correct move & replace patch,
there will be subsequent changes to clean up the code and to make
better use of the new header organization.

Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Jackson <pj@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-28 09:31:13 +01:00
Chris Wilson 62fa0ce2bd agp/intel: Move intel_fake_agp_sizes into #ifdef block
Move the intel_fake_agp_sizes array into the same #ifdef block as it is
used to avoid instantiation when not used, and so triggering a compiler
warning

drivers/char/agp/intel-gtt.c:335:42: warning: ‘intel_fake_agp_sizes’
defined but not used [-Wunused-const-variable=]

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170121182233.30852-1-chris@chris-wilson.co.uk
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-01-23 09:15:29 +00:00
Chris Wilson edd1f2fe11 drm/i915: Use fixed-sized types for stolen
Stolen memory is a hardware resource of known size, so use an accurate
fixed integer type rather than the ambiguous variable size_t. This was
motivated by the next patch spotting inconsistencies in our types.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106152013.24684-3-chris@chris-wilson.co.uk
2017-01-06 16:02:09 +00:00
Linus Torvalds 7c0f6ba682 Replace <asm/uaccess.h> with <linux/uaccess.h> globally
This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.

Requested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-24 11:46:01 -08:00
Jan Kara 1a29d85eb0 mm: use vmf->address instead of of vmf->virtual_address
Every single user of vmf->virtual_address typed that entry to unsigned
long before doing anything with it so the type of virtual_address does
not really provide us any additional safety.  Just use masked
vmf->address which already has the appropriate type.

Link: http://lkml.kernel.org/r/1479460644-25076-3-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14 16:04:09 -08:00
Chris Wilson 3497971a71 agp/intel: Flush chipset writes after updating a single PTE
After we update one PTE for a page, the caller expects to be able to
immediately use that through a GGTT read/write. To comply with the
callers expectations we therefore need to flush the chipset buffers
before returning.

Reported-by: Matti Hämäläinen <ccr@tnsp.org>
Fixes: d6473f5664 ("drm/i915: Add support for mapping an object page...")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Matti Hämäläinen <ccr@tnsp.org>
Cc: drm-intel-fixes@lists.freedesktop.org
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20160818161718.27187-2-chris@chris-wilson.co.uk
2016-08-18 22:36:23 +01:00
Chris Wilson d6473f5664 drm/i915: Add support for mapping an object page by page
Introduced a new vm specfic callback insert_page() to program a single pte in
ggtt or ppgtt. This allows us to map a single page in to the mappable aperture
space. This can be iterated over to access the whole object by using space as
meagre as page size.

v2: Added low level rpm assertions to insert_page routines (Chris)

v3: Added POSTING_READ post register write (Tvrtko)

v4: Rebase (Ankit)

v5: Removed wmb() and FLUSH_CTL from insert_page, caller to take care
of it (Chris)

v6: insert_page not working correctly without FLSH_CNTL write, added the
write again.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ankitprasad Sharma <ankitprasad.r.sharma@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2016-06-13 10:03:54 +01:00
Linus Torvalds 266c73b777 Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.6 kernel.

  Overall the coolest thing here for me is the nouveau maxwell signed
  firmware support from NVidia, it's taken a long while to extract this
  from them.

  I also wish the ARM vendors just designed one set of display IP, ARM
  display block proliferation is definitely increasing.

  Core:
     - drm_event cleanups
     - Internal API cleanup making mode_fixup optional.
     - Apple GMUX vga switcheroo support.
     - DP AUX testing interface

  Panel:
     - Refactoring of DSI core for use over more transports.

  New driver:
     - ARM hdlcd driver

  i915:
     - FBC/PSR (framebuffer compression, panel self refresh) enabled by default.
     - Ongoing atomic display support work
     - Ongoing runtime PM work
     - Pixel clock limit checks
     - VBT DSI description support
     - GEM fixes
     - GuC firmware scheduler enhancements

  amdkfd:
     - Deferred probing fixes to avoid make file or link ordering.

  amdgpu/radeon:
     - ACP support for i2s audio support.
     - Command Submission/GPU scheduler/GPUVM optimisations
     - Initial GPU reset support for amdgpu

  vmwgfx:
     - Support for DX10 gen mipmaps
     - Pageflipping and other fixes.

  exynos:
     - Exynos5420 SoC support for FIMD
     - Exynos5422 SoC support for MIPI-DSI

  nouveau:
     - GM20x secure boot support - adds acceleration for Maxwell GPUs.
     - GM200 support
     - GM20B clock driver support
     - Power sensors work

  etnaviv:
     - Correctness fixes for GPU cache flushing
     - Better support for i.MX6 systems.

  imx-drm:
     - VBlank IRQ support
     - Fence support
     - OF endpoint support

  msm:
     - HDMI support for 8996 (snapdragon 820)
     - Adreno 430 support
     - Timestamp queries support

  virtio-gpu:
     - Fixes for Android support.

  rockchip:
     - Add support for Innosilicion HDMI

  rcar-du:
     - Support for 4 crtcs
     - R8A7795 support
     - RCar Gen 3 support

  omapdrm:
     - HDMI interlace output support
     - dma-buf import support
     - Refactoring to remove a lot of legacy code.

  tilcdc:
     - Rewrite of pageflipping code
     - dma-buf support
     - pinctrl support

  vc4:
     - HDMI modesetting bug fixes
     - Significant 3D performance improvement.

  fsl-dcu (FreeScale):
     - Lots of fixes

  tegra:
     - Two small fixes

  sti:
     - Atomic support for planes
     - Improved HDMI support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits)
  drm/amdgpu: release_pages requires linux/pagemap.h
  drm/sti: restore mode_fixup callback
  drm/amdgpu/gfx7: add MTYPE definition
  drm/amdgpu: removing BO_VAs shouldn't be interruptible
  drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
  drm/amd/powerplay: show uvd/vce power gate info for fiji
  drm/amdgpu: use sched fence if possible
  drm/amdgpu: move ib.fence to job.fence
  drm/amdgpu: give a fence param to ib_free
  drm/amdgpu: include the right version of gmc header files for iceland
  drm/radeon: fix indentation.
  drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
  drm/amdgpu: switch back to 32bit hw fences v2
  drm/amdgpu: remove amdgpu_fence_is_signaled
  drm/amdgpu: drop the extra fence range check v2
  drm/amdgpu: signal fences directly in amdgpu_fence_process
  drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
  drm/amdgpu: keep all fences in an RCU protected array v2
  drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
  drm/amdgpu: RCU protected amd_sched_fence_release
  ...
2016-03-21 13:48:00 -07:00
Linus Torvalds 643ad15d47 Merge branch 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 protection key support from Ingo Molnar:
 "This tree adds support for a new memory protection hardware feature
  that is available in upcoming Intel CPUs: 'protection keys' (pkeys).

  There's a background article at LWN.net:

      https://lwn.net/Articles/643797/

  The gist is that protection keys allow the encoding of
  user-controllable permission masks in the pte.  So instead of having a
  fixed protection mask in the pte (which needs a system call to change
  and works on a per page basis), the user can map a (handful of)
  protection mask variants and can change the masks runtime relatively
  cheaply, without having to change every single page in the affected
  virtual memory range.

  This allows the dynamic switching of the protection bits of large
  amounts of virtual memory, via user-space instructions.  It also
  allows more precise control of MMU permission bits: for example the
  executable bit is separate from the read bit (see more about that
  below).

  This tree adds the MM infrastructure and low level x86 glue needed for
  that, plus it adds a high level API to make use of protection keys -
  if a user-space application calls:

        mmap(..., PROT_EXEC);

  or

        mprotect(ptr, sz, PROT_EXEC);

  (note PROT_EXEC-only, without PROT_READ/WRITE), the kernel will notice
  this special case, and will set a special protection key on this
  memory range.  It also sets the appropriate bits in the Protection
  Keys User Rights (PKRU) register so that the memory becomes unreadable
  and unwritable.

  So using protection keys the kernel is able to implement 'true'
  PROT_EXEC on x86 CPUs: without protection keys PROT_EXEC implies
  PROT_READ as well.  Unreadable executable mappings have security
  advantages: they cannot be read via information leaks to figure out
  ASLR details, nor can they be scanned for ROP gadgets - and they
  cannot be used by exploits for data purposes either.

  We know about no user-space code that relies on pure PROT_EXEC
  mappings today, but binary loaders could start making use of this new
  feature to map binaries and libraries in a more secure fashion.

  There is other pending pkeys work that offers more high level system
  call APIs to manage protection keys - but those are not part of this
  pull request.

  Right now there's a Kconfig that controls this feature
  (CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS) that is default enabled
  (like most x86 CPU feature enablement code that has no runtime
  overhead), but it's not user-configurable at the moment.  If there's
  any serious problem with this then we can make it configurable and/or
  flip the default"

* 'mm-pkeys-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
  x86/mm/pkeys: Fix mismerge of protection keys CPUID bits
  mm/pkeys: Fix siginfo ABI breakage caused by new u64 field
  x86/mm/pkeys: Fix access_error() denial of writes to write-only VMA
  mm/core, x86/mm/pkeys: Add execute-only protection keys support
  x86/mm/pkeys: Create an x86 arch_calc_vm_prot_bits() for VMA flags
  x86/mm/pkeys: Allow kernel to modify user pkey rights register
  x86/fpu: Allow setting of XSAVE state
  x86/mm: Factor out LDT init from context init
  mm/core, x86/mm/pkeys: Add arch_validate_pkey()
  mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
  x86/mm/pkeys: Actually enable Memory Protection Keys in the CPU
  x86/mm/pkeys: Add Kconfig prompt to existing config option
  x86/mm/pkeys: Dump pkey from VMA in /proc/pid/smaps
  x86/mm/pkeys: Dump PKRU with other kernel registers
  mm/core, x86/mm/pkeys: Differentiate instruction fetches
  x86/mm/pkeys: Optimize fault handling in access_error()
  mm/core: Do not enforce PKEY permissions on remote mm access
  um, pkeys: Add UML arch_*_access_permitted() methods
  mm/gup, x86/mm/pkeys: Check VMAs and PTEs for protection keys
  x86/mm/gup: Simplify get_user_pages() PTE bit handling
  ...
2016-03-20 19:08:56 -07:00
Dave Hansen e6bfb70959 mm/core, arch, powerpc: Pass a protection key in to calc_vm_flag_bits()
This plumbs a protection key through calc_vm_flag_bits().  We
could have done this in calc_vm_prot_bits(), but I did not feel
super strongly which way to go.  It was pretty arbitrary which
one to use.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chen Gang <gang.chen.5i5j@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: David Airlie <airlied@linux.ie>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Geliang Tang <geliangtang@163.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Leon Romanovsky <leon@leon.nu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Riley Andrews <riandrews@android.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: devel@driverdev.osuosl.org
Cc: linux-api@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/20160212210231.E6F1F0D6@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-02-18 19:46:30 +01:00
Daniel Vetter ebb7c78d35 agp/intel-gtt: Only register fake agp driver for gen1
The fake agp driver for the intel graphics gart is only needed for ums
support. And we ditched that a long time ago:

commit 03dae59c72
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Jul 23 16:27:25 2014 +0200

    drm/i915: Ditch UMS config option

With this there's no longer the problem that 2 drivers (fake agp
driver and the drm/i915 driver) fight over the same piece, which fixes
apparent dma leaks detected by CONFIG_DMA_API_DEBUG.

Note that the leak isn't real since intel-gtt refcounts and will tear
down eventually. But the debug code assumes that when the i915 driver
unbinds from the pci device everything should be gone. Which isn't the
case if we have intel-agp enabled - userspace might need it. But by
ditching this intel-gtt setup and teardown is completely tied to the
livetime of the "real" driver.

While at it untangle the init ordering a bit - the fake agp wouldn't
be initialized correctly if i915.ko loads first. Which isn't a problem
since when i915 loads in kms mode you won't need the fake agp support
needed by the ums driver ...

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93793
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453901881-26425-3-git-send-email-daniel.vetter@ffwll.ch
2016-02-11 11:38:35 +01:00
Daniel Vetter 9f5ac8ed40 agp/intel-gtt: Don't leak the scratch page
Recently discovered by enabling CONFIG_DMA_API_DEBUG in our CI. By the
looks of it broken since forever.

v2: Don't forget to set the scratch page back to wb (Chris). Reuse
intel_gtt_teardown_scratch_page for that (and fix it up to treat
needs_dmar y/n correctly).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93793
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1453901881-26425-1-git-send-email-daniel.vetter@ffwll.ch
2016-02-10 08:52:08 +01:00