Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue
and wujing. Partners can submit pull requests to this branch, and we
can pick the commits to tk4 pub/lts/0017-kabi easly.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
The xtensa free_initrd_mem() verifies that initrd is mapped and then
frees its memory using free_reserved_area().
The initrd is considered mapped when its memory was successfully reserved
with mem_reserve().
Resetting initrd_start to 0 in case of mem_reserve() failure allows to
switch to generic free_initrd_mem() implementation.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Message-Id: <1563977432-8376-1-git-send-email-rppt@linux.ibm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- clean up PCI support code;
- add defconfig and DTS for the 'virt' board;
- abstract 'entry' and 'retw' uses in xtensa assembly in preparation for
XEA3/NX pipeline support;
- random small cleanups.
-----BEGIN PGP SIGNATURE-----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=Q6w/
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20190715' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- clean up PCI support code
- add defconfig and DTS for the 'virt' board
- abstract 'entry' and 'retw' uses in xtensa assembly in preparation
for XEA3/NX pipeline support
- random small cleanups
* tag 'xtensa-20190715' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: virt: add defconfig and DTS
xtensa: abstract 'entry' and 'retw' in assembly code
xtensa: One function call less in bootmem_init()
xtensa: remove arch/xtensa/include/asm/types.h
xtensa: use generic pcibios_set_master and pcibios_enable_device
xtensa: drop dead PCI support code
xtensa/PCI: Remove unused variable
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
Provide abi_entry, abi_entry_default, abi_ret and abi_ret_default macros
that allocate aligned stack frame in windowed and call0 ABIs.
Provide XTENSA_SPILL_STACK_RESERVE macro that specifies required stack
frame size when register spilling is involved.
Replace all uses of 'entry' and 'retw' with the above macros.
This makes most of the xtensa assembly code ready for XEA3 and call0 ABI.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Avoid an extra function call by using a ternary operator instead of
a conditional statement for a setting selection.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Message-Id: <495c9f2e-7880-ee9a-5c61-eee598bb24c2@web.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.
The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.
The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:
force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Patch series "provide a generic free_initmem implementation", v2.
Many architectures implement free_initmem() in exactly the same or very
similar way: they wrap the call to free_initmem_default() with sometimes
different 'poison' parameter.
These patches switch those architectures to use a generic implementation
that does free_initmem_default(POISON_FREE_INITMEM).
This was inspired by Christoph's patches for free_initrd_mem [1] and I
shamelessly copied changelog entries from his patches :)
[1] https://lore.kernel.org/lkml/20190213174621.29297-1-hch@lst.de/
This patch (of 2):
For most architectures free_initmem just a wrapper for the same
free_initmem_default(-1) call. Provide that as a generic implementation
marked __weak.
Link: http://lkml.kernel.org/r/1550515285-17446-2-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use %lu instead of %zu to fix the following warning introduced with
recent memblock refactoring:
xtensa/mm/mmu.c:36:9: warning: format '%zu' expects argument of type
'size_t', but argument 3 has type 'long unsigned int
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add check for the return value of memblock_alloc*() functions and call
panic() in case of error. The panic message repeats the one used by
panicing memblock allocators with adjustment of parameters to include
only relevant ones.
The replacement was mostly automated with semantic patches like the one
below with manual massaging of format strings.
@@
expression ptr, size, align;
@@
ptr = memblock_alloc(size, align);
+ if (!ptr)
+ panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align);
[anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type]
Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org
[rppt@linux.ibm.com: fix format strings for panics after memblock_alloc]
Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com
[rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails]
Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx
[akpm@linux-foundation.org: fix xtensa printk warning]
Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Guo Ren <ren_guo@c-sky.com> [c-sky]
Acked-by: Paul Burton <paul.burton@mips.com> [MIPS]
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> [s390]
Reviewed-by: Juergen Gross <jgross@suse.com> [Xen]
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make the memblock_phys_alloc() function an inline wrapper for
memblock_phys_alloc_range() and update the memblock_phys_alloc() callers
to check the returned value and panic in case of error.
Link: http://lkml.kernel.org/r/1548057848-15136-8-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The calls to memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE)
and memblock_phys_alloc(size, align) are equivalent as both try to
allocate 'size' bytes with 'align' alignment anywhere in the memory and
panic if hte allocation fails.
The conversion is done using the following semantic patch:
@@
expression size, align;
@@
- memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE)
+ memblock_phys_alloc(size, align)
Link: http://lkml.kernel.org/r/1548057848-15136-4-git-send-email-rppt@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Guo Ren <ren_guo@c-sky.com> [c-sky]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Juergen Gross <jgross@suse.com> [Xen]
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- switch to generated syscall table
- switch ptrace to regsets, use regsets for core dumps
- complete tracehook implementation
- add syscall tracepoints support
- add jumplabels support
- add memtest support
- drop unused/duplicated code from entry.S, ptrace.c, coprocessor.S,
elf.h and syscall.h
- clean up warnings caused by WSR/RSR macros
- clean up DTC warnings about SPI controller node names in xtfpga.dtsi
- simplify coprocessor.S
- get rid of explicit 'l32r' instruction usage in assembly
-----BEGIN PGP SIGNATURE-----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=LqC4
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20181228' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
- switch to generated syscall table
- switch ptrace to regsets, use regsets for core dumps
- complete tracehook implementation
- add syscall tracepoints support
- add jumplabels support
- add memtest support
- drop unused/duplicated code from entry.S, ptrace.c, coprocessor.S,
elf.h and syscall.h
- clean up warnings caused by WSR/RSR macros
- clean up DTC warnings about SPI controller node names in xtfpga.dtsi
- simplify coprocessor.S
- get rid of explicit 'l32r' instruction usage in assembly
* tag 'xtensa-20181228' of git://github.com/jcmvbkbc/linux-xtensa: (25 commits)
xtensa: implement jump_label support
xtensa: implement syscall tracepoints
xtensa: implement tracehook functions and enable HAVE_ARCH_TRACEHOOK
xtensa: enable CORE_DUMP_USE_REGSET
xtensa: implement TIE regset
xtensa: implement task_user_regset_view
xtensa: call do_syscall_trace_{enter,leave} selectively
xtensa: use NO_SYSCALL instead of -1
xtensa: define syscall_get_arch()
Move EM_XTENSA to uapi/linux/elf-em.h
xtensa: support memtest
xtensa: don't use l32r opcode directly
xtensa: xtfpga.dtsi: fix dtc warnings about SPI
xtensa: don't clear cpenable unconditionally on release
xtensa: simplify coprocessor.S
xtensa: clean up WSR*/RSR*/get_sr/set_sr
xtensa: drop unused declarations from elf.h
xtensa: clean up syscall.h
xtensa: drop unused coprocessor helper functions
xtensa: drop custom PTRACE_{PEEK,POKE}{TEXT,DATA}
...
With tag based KASAN mode the early shadow value is 0xff and not 0x00, so
this patch renames kasan_zero_(page|pte|pmd|pud|p4d) to
kasan_early_shadow_(page|pte|pmd|pud|p4d) to avoid confusion.
Link: http://lkml.kernel.org/r/3fed313280ebf4f88645f5b89ccbc066d320e177.1544099024.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- use ZONE_NORMAL instead of ZONE_DMA;
- fix Image.elf build error caused by assignment of incorrect address
to the .note.Linux section;
- clean up debug and property sections in the vmlinux.lds.S.
-----BEGIN PGP SIGNATURE-----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=HpOT
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20181101' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa fixes and cleanups from Max Filippov:
- use ZONE_NORMAL instead of ZONE_DMA
- fix Image.elf build error caused by assignment of incorrect address
to the .note.Linux section
- clean up debug and property sections in the vmlinux.lds.S
* tag 'xtensa-20181101' of git://github.com/jcmvbkbc/linux-xtensa:
xtensa: clean up xtensa-specific property sections
xtensa: use DWARF_DEBUG in the vmlinux.lds.S
xtensa: add NOTES section to the linker script
xtensa: remove ZONE_DMA
Move remaining definitions and declarations from include/linux/bootmem.h
into include/linux/memblock.h and remove the redundant header.
The includes were replaced with the semantic patch below and then
semi-automated removal of duplicated '#include <linux/memblock.h>
@@
@@
- #include <linux/bootmem.h>
+ #include <linux/memblock.h>
[sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au
[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h]
Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au
[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal]
Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au
Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The alloc_bootmem_low_pages() function allocates PAGE_SIZE aligned regions
from low memory. memblock_alloc_low() with alignment set to PAGE_SIZE does
exactly the same thing.
The conversion is done using the following semantic patch:
@@
expression e;
@@
- alloc_bootmem_low_pages(e)
+ memblock_alloc_low(e, PAGE_SIZE)
Link: http://lkml.kernel.org/r/1536927045-23536-19-git-send-email-rppt@linux.vnet.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Paul Burton <paul.burton@mips.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Serge Semin <fancer.lancer@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ZONE_DMA is intended for magic < 32-bit pools (usually ISA DMA), which
isn't required on xtensa. Move all the non-highmem memory into
ZONE_NORMAL instead to match other architectures.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use new return type vm_fault_t for fault handler. For now, this is just
documenting that the function returns a VM_FAULT value rather than an
errno. Once all instances are converted, vm_fault_t will become a
distinct type.
Ref-> commit 1c8f422059 ("mm: change return type to vm_fault_t")
In this patch all the caller of handle_mm_fault() are changed to return
vm_fault_t type.
Link: http://lkml.kernel.org/r/20180617084810.GA6730@jordon-HP-15-Notebook-PC
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: David S. Miller <davem@davemloft.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Levin, Alexander (Sasha Levin)" <alexander.levin@verizon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.
Simplify this process by using the helper force_sig_fault. Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.
In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.
Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.
The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.
In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.
Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Thanks to commit 4b3ef9daa4 ("mm/swap: split swap cache into 64MB
trunks"), after swapoff the address_space associated with the swap
device will be freed. So page_mapping() users which may touch the
address_space need some kind of mechanism to prevent the address_space
from being freed during accessing.
The dcache flushing functions (flush_dcache_page(), etc) in architecture
specific code may access the address_space of swap device for anonymous
pages in swap cache via page_mapping() function. But in some cases
there are no mechanisms to prevent the swap device from being swapoff,
for example,
CPU1 CPU2
__get_user_pages() swapoff()
flush_dcache_page()
mapping = page_mapping()
... exit_swap_address_space()
... kvfree(spaces)
mapping_mapped(mapping)
The address space may be accessed after being freed.
But from cachetlb.txt and Russell King, flush_dcache_page() only care
about file cache pages, for anonymous pages, flush_anon_page() should be
used. The implementation of flush_dcache_page() in all architectures
follows this too. They will check whether page_mapping() is NULL and
whether mapping_mapped() is true to determine whether to flush the
dcache immediately. And they will use interval tree (mapping->i_mmap)
to find all user space mappings. While mapping_mapped() and
mapping->i_mmap isn't used by anonymous pages in swap cache at all.
So, to fix the race between swapoff and flush dcache, __page_mapping()
is add to return the address_space for file cache pages and NULL
otherwise. All page_mapping() invoking in flush dcache functions are
replaced with page_mapping_file().
[akpm@linux-foundation.org: simplify page_mapping_file(), per Mike]
Link: http://lkml.kernel.org/r/20180305083634.15174-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Xtensa memory initialization code frees high memory pages without
checking whether they are in the reserved memory regions or not. That
results in invalid value of totalram_pages and duplicate page usage by
CMA and highmem. It produces a bunch of BUGs at startup looking like
this:
BUG: Bad page state in process swapper pfn:70800
page:be60c000 count:0 mapcount:-127 mapping: (null) index:0x1
flags: 0x80000000()
raw: 80000000 00000000 00000001 ffffff80 00000000 be60c014 be60c014 0000000a
page dumped because: nonzero mapcount
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Tainted: G B 4.16.0-rc1-00015-g7928b2cbe55b-dirty #23
Stack:
bd839d33 00000000 00000018 ba97b64c a106578c bd839d70 be60c000 00000000
a1378054 bd86a000 00000003 ba97b64c a1066166 bd839da0 be60c000 ffe00000
a1066b58 bd839dc0 be504000 00000000 000002f4 bd838000 00000000 0000001e
Call Trace:
[<a1065734>] bad_page+0xac/0xd0
[<a106578c>] free_pages_check_bad+0x34/0x4c
[<a1066166>] __free_pages_ok+0xae/0x14c
[<a1066b58>] __free_pages+0x30/0x64
[<a1365de5>] init_cma_reserved_pageblock+0x35/0x44
[<a13682dc>] cma_init_reserved_areas+0xf4/0x148
[<a10034b8>] do_one_initcall+0x80/0xf8
[<a1361c16>] kernel_init_freeable+0xda/0x13c
[<a125b59d>] kernel_init+0x9/0xd0
[<a1004304>] ret_from_kernel_thread+0xc/0x18
Only free high memory pages that are not reserved.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Output virtual addresses and sizes occupied by the main kernel sections:
.text, .rodata, .data, .init and .bss.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Cover kernel addresses above 0x90000000 by the shadow map. Enable
HAVE_ARCH_KASAN when MMU is enabled. Provide kasan_early_init that fills
shadow map with writable copies of kasan_zero_page. Call
kasan_early_init right after mmu initialization in the setup_arch.
Provide kasan_init that allocates proper shadow map pages from the
memblock and puts these pages into the shadow map for addresses from
VMALLOC area to the end of KSEG. Call kasan_init right after memblock
initialization. Don't use KASAN for the boot code, MMU and KASAN
initialization and page fault handler. Make kernel stack size 4 times
larger when KASAN is enabled to avoid stack overflows.
GCC 7.3, 8 or newer is required to build the xtensa kernel with KASAN.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The virtual address space between the page table and the VMALLOC region
is big enough to host KASAN shadow map and there's enough space between
the VMALLOC area and KSEG for the fixmap and kmap.
Move fixmap and kmap to the gap between VMALLOC area and KSEG, just
above the KSEG. Reorder entries in the kernel memory layout printing
code. Drop duplicate PGTABLE_START definition, use
XCHAL_PAGE_TABLE_VADDR instead.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
swapper_pg_dir is located in the .bss, so it's zero-initialized anyway.
With KASAN enabled paging_init will be called after KASAN
initialization, it must not erase page directory entries set up for
KASAN shadow map.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
KIO region placement may be specified in the device tree, that's why
it's initialized with the rest of MMU after the early_init_devtree. In
order to support KASAN the MMU must be initialized earlier.
Separate KIO initialization from the rest of MMU initialization.
Reinitialize KIO if its location is specified in the device tree.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Replace #ifdef'fed/commented out debug printk statements with pr_debug.
Replace printk statements with pr_* equivalents.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Functions clear_user_highpage, copy_user_highpage, flush_dcache_page,
local_flush_cache_range and local_flush_cache_page may be used from
modules. Export them.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Currently building kernel for xtensa core with aliasing WT cache fails
with the following messages:
mm/memory.c:2152: undefined reference to `flush_dcache_page'
mm/memory.c:2332: undefined reference to `local_flush_cache_page'
mm/memory.c:1919: undefined reference to `local_flush_cache_range'
mm/memory.c:4179: undefined reference to `copy_to_user_page'
mm/memory.c:4183: undefined reference to `copy_from_user_page'
This happens because implementation of these functions is only compiled
when data cache is WB, which looks wrong: even when data cache doesn't
need flushing it still needs invalidation. The functions like
__flush_[invalidate_]dcache_* are correctly defined for both WB and WT
caches (and even if they weren't that'd still be ok, just slower).
Fix this by providing the same implementation of the above functions for
both WB and WT cache.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This file was only including module.h for exception table related
functions. We've now separated that content out into its own file
"extable.h" so now move over to that and avoid all the extra header
content in module.h that we don't really need to compile this file.
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-xtensa@linux-xtensa.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Enable HAVE_DMA_CONTIGUOUS, reserve contiguous memory at bootmem_init,
use dma_alloc_from_contiguous and dma_release_from_contiguous in
xtensa_dma_alloc/free.
This allows for big contiguous DMA buffer allocation from designated
area configured in the device tree.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
KSEG size, starting at physical address other than 0;
- make kernel load address configurable;
- clean up kernel memory layout macros;
- drop sysmem early allocator and switch to memblock;
- enable kmemleak and memory reservation from the device tree;
- wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range,
preadv2 and pwritev2;
- add new platform: Cadence Configurable System Platform (CSP) and new
core variant for it: xt_lnx;
- rearrange CCOUNT calibration code, make most of it generic;
- improve machine reset code (XTFPGA now reboots reliably with MMUv3
cores);
- provide default memmap command line option for configurations without
device tree support;
- ISS fixes: simdisk is now capable of using highmem pages, panic
correctly terminates simulator.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=8HqU
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa
Pull Xtensa updates from Max Filippov:
"Updates for the xtensa architecture. It is a combined set of patches
for 4.8 that never got to the mainline and new patches for 4.9.
- add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB
KSEG size, starting at physical address other than 0
- make kernel load address configurable
- clean up kernel memory layout macros
- drop sysmem early allocator and switch to memblock
- enable kmemleak and memory reservation from the device tree
- wire up new syscalls: userfaultfd, membarrier, mlock2,
copy_file_range, preadv2 and pwritev2
- add new platform: Cadence Configurable System Platform (CSP) and
new core variant for it: xt_lnx
- rearrange CCOUNT calibration code, make most of it generic
- improve machine reset code (XTFPGA now reboots reliably with MMUv3
cores)
- provide default memmap command line option for configurations
without device tree support
- ISS fixes: simdisk is now capable of using highmem pages, panic
correctly terminates simulator"
* tag 'xtensa-20161005' of git://github.com/jcmvbkbc/linux-xtensa: (24 commits)
xtensa: disable MMU initialization option on MMUv2 cores
xtensa: add default memmap and mmio32native options to defconfigs
xtensa: add default memmap option to common_defconfig
xtensa: add default memmap option to iss_defconfig
xtensa: ISS: allow simdisk to use high memory buffers
xtensa: ISS: define simc_exit and use it instead of inline asm
xtensa: xtfpga: group platform_* functions together
xtensa: rearrange CCOUNT calibration
xtensa: xtfpga: use clock provider, don't update DT
xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.
xtensa: initialize MMU before jumping to reset vector
xtensa: fix icountlevel setting in cpu_reset
xtensa: extract common CPU reset code into separate function
xtensa: Added Cadence CSP kernel configuration for Xtensa
xtensa: fix default kernel load address
xtensa: wire up new syscalls
xtensa: support reserved-memory DT node
xtensa: drop sysmem and switch to memblock
xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE}
xtensa: cleanup MMU setup and kernel layout macros
...
This allows reserving regions of physical memory from the device tree.
See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
for more details.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Memblock is the standard kernel boot-time memory tracker/allocator. Use
it instead of the custom sysmem allocator. This allows using kmemleak,
CMA and device tree memory reservation.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
MMUv3 is able to support low memory bigger than 128MB.
Implement 256MB and 512MB KSEG layouts:
- add Kconfig selector for KSEG layout;
- add KSEG base address, size and alignment definitions to
arch/xtensa/include/asm/kmem_layout.h;
- use new definitions in TLB initialization;
- add build time memory map consistency checks.
See Documentation/xtensa/mmu.txt for the details of new memory layouts.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Create a header dedicated to memory layout definitions. Include it from
places where these definitions are needed.
Express vmalloc area address, VIRTUAL_MEMORY_ADDRESS and KERNELOFFSET
through KSEG address.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
- control whether perf IRQ is treated as NMI from Kconfig;
- implement ioremap for regions outside KIO segment;
- fix ISS serial port behaviour when EOF is reached;
- fix preemption in {clear,copy}_user_highpage;
- fix endianness issues for XTFPGA devices, big-endian cores are now
fully functional;
- clean up debug infrastructure and add support for hardware breakpoints
and watchpoints.
- add processor configurations for Three Core HiFi-2 MX and HiFi3 cpus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jcKN
-----END PGP SIGNATURE-----
Merge tag 'xtensa-next-20160320' of git://github.com/czankel/xtensa-linux
Pull Xtensa updates from Chris Zankel:
"Xtensa improvements for 4.6:
- control whether perf IRQ is treated as NMI from Kconfig
- implement ioremap for regions outside KIO segment
- fix ISS serial port behaviour when EOF is reached
- fix preemption in {clear,copy}_user_highpage
- fix endianness issues for XTFPGA devices, big-endian cores are now
fully functional
- clean up debug infrastructure and add support for hardware
breakpoints and watchpoints
- add processor configurations for Three Core HiFi-2 MX and HiFi3
cpus"
* tag 'xtensa-next-20160320' of git://github.com/czankel/xtensa-linux:
xtensa: add test_kc705_hifi variant
xtensa: add Three Core HiFi-2 MX Variant.
xtensa: support hardware breakpoints/watchpoints
xtensa: use context structure for debug exceptions
xtensa: remove remaining non-functional KGDB bits
xtensa: clear all DBREAKC registers on start
xtensa: xtfpga: fix earlycon endianness
xtensa: xtfpga: fix i2c controller register width and endianness
xtensa: xtfpga: fix ethernet controller endianness
xtensa: xtfpga: fix serial port register width and endianness
xtensa: define CONFIG_CPU_{BIG,LITTLE}_ENDIAN
xtensa: fix preemption in {clear,copy}_user_highpage
xtensa: ISS: don't hang if stdin EOF is reached
xtensa: support ioremap for memory outside KIO region
xtensa: use XTENSA_INT_LEVEL macro in asm/timex.h
xtensa: make fake NMI configurable
The define has a comment from Nick Piggin from 2007:
/* For backwards compat. Remove me quickly. */
I guess 9 years should not be too hurried sense of 'quickly' even for
kernel measures.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Disabling pagefault makes little sense there, preemption disabling is
what was meant.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Jianping Liu