A small update for the regualtor API for this cycle, some small fixes
and a bunch of new devices but none of them very big. The most stand
out thing is the regulator-fixed-clock driver which is for regulators
where the enable control is done by using a clock instead of a GPIO or
register write, a novel hardware design that had not previously come up.
- Added a keyword pattern for regulator_get_optional() since usage of
that API generally needs extra review.
- Operating mode and suspend state support for act8865.
- New device support for Active Semiconductor ACT8600 chargers,
Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and
Synoptics SY20276, SY20278 and SY8824E.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAl1+wp8THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0GP2B/4ia4TBT2u5ZuxlyLfrsHoAJ1iVleYW
D0s+Nsfou6lTrbJrIQgbVXsqbeBGhIBEYgfuyRJiy7CEwMssA7ltyyKbeBQ0U81W
ywXniN1W5ChRGP770DI1Rez4qqDyIQegLC1afx1dXH4p7Be/Ttk69NQJscmpm9hC
sXJ2tMoa2N1+nKeMEQvVsqegbdy8ddXNRIKnUnzV0HPkOTEVIwlTVR/gQXOtOpax
UXx+mTeLQKplq9zditkRysuTWIsog1jC1kZRVu5goZ8+uudWK0SrVML4bWB6rPrJ
d8moHJuwLHMipv+xLhI0bKGEYD4jnDqyGPJkJBuDSZTZ5EAJPaaiH923
=a+m4
-----END PGP SIGNATURE-----
Merge tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"A small update for the regualtor API for this cycle, some small fixes
and a bunch of new devices but none of them very big.
The most stand out thing is the regulator-fixed-clock driver which is
for regulators where the enable control is done by using a clock
instead of a GPIO or register write, a novel hardware design that had
not previously come up.
Summary:
- Added a keyword pattern for regulator_get_optional() since usage of
that API generally needs extra review.
- Operating mode and suspend state support for act8865.
- New device support for Active Semiconductor ACT8600 chargers,
Mediatek MT6358, Qualcomm SM8150, regulator-fixed-clock, and
Synoptics SY20276, SY20278 and SY8824E"
* tag 'regulator-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
regulator: core: Fix error return for /sys access
regulator: da9211: fix obtaining "enable" GPIO
regulator: max77686: fix obtaining "maxim,ena" GPIO
regulator: uniphier: Add Pro5 USB3 VBUS support
dt-bindings: regulator: add regulator-fixed-clock binding
regulator: fixed: add possibility to enable by clock
regulator: s2mps11: Consistently use local variable
regulator: lp87565: Simplify lp87565_buck_set_ramp_delay
regulator: slg51000: use devm_gpiod_get_optional() in probe
regulator: lp8788-ldo: make array en_mask static const, makes object smaller
regulator: tps65132: Stop parsing DT when gpio is not found
regulator: Defer init completion for a while after late_initcall
regulator: add missing 'static inline' to a helper's stub
regulator: provide regulator_bulk_set_supply_names()
MAINTAINERS: Add keyword pattern on regulator_get_optional()
regulator: sy8824x: add prefixes to BUCK_EN and MODE macros
regulator: sy8824x: use c++style for the comment block near SPDX
regulator: mt6358: Add BROKEN dependency while waiting for MFD to merge
regulator: mt6358: Add support for MT6358 regulator
regulator: Add document for MT6358 regulator
...
New drivers and chip support
- Add Inspur Power System power supply driver
- Add Synaptics AS370 PVT sensor driver
- Add support for SHTC3 to shtc1 driver
- Add support for NCT6116 to nct6775 driver
- Add support for AMD family 17h, model 70h CPUs to k10temp driver
- Add support for PCT2075 to lm75 driver
Removed drivers
- Remove ads1015 driver (now supported in iio)
Other changes
- Convert drivers to use devm_i2c_new_dummy_device
- Substantial structural improvements in lm75 driver
Add support for writing sample interval for supported chips
- Add support for PSU version 2 to ibm-cffps driver
- Add support for power attribute to iio_hwmon bridge
- Add support for additional fan, voltage and temperature attributes
to nct7904 driver
- Convert adt7475 driver to use hwmon_device_register_with_groups()
- Convert k8temp driver to use hwmon_device_register_with_info()
- Various other improvements and minor fixes
-----BEGIN PGP SIGNATURE-----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=sRtz
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Inspur Power System power supply driver
- Synaptics AS370 PVT sensor driver
Chip support:
- support SHTC3 in shtc1 driver
- support NCT6116 in nct6775 driver
- support AMD family 17h, model 70h CPUs in k10temp driver
- support PCT2075 in lm75 driver
Removed drivers:
- ads1015 driver (now supported in iio)
Other changes:
- Convert drivers to use devm_i2c_new_dummy_device
- Substantial structural improvements in lm75 driver adding support
for writing sample interval for supported chips
- Add support for PSU version 2 to ibm-cffps driver
- Add support for power attribute to iio_hwmon bridge
- Add support for additional fan, voltage and temperature attributes
to nct7904 driver
- Convert adt7475 driver to use hwmon_device_register_with_groups()
- Convert k8temp driver to use hwmon_device_register_with_info()
- Various other improvements and minor fixes"
* tag 'hwmon-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
hwmon: submitting-patches: Add note on comment style
hwmon: submitting-patches: Point to with_info API
hwmon: (nct7904) Fix incorrect SMI status register setting of LTD temperature and fan.
hwmon: (shtc1) add support for the SHTC3 sensor
hwmon: (shtc1) fix shtc1 and shtw1 id mask
hwmon: (lm75) Aproximate sample times to data-sheet values
hwmon: (w83793d) convert to use devm_i2c_new_dummy_device
hwmon: (w83792d) convert to use devm_i2c_new_dummy_device
hwmon: (w83791d) convert to use devm_i2c_new_dummy_device
hwmon: (as370-hwmon) fix devm_platform_ioremap_resource.cocci warnings
hwmon: (lm75) Add support for writing sampling period on PCT2075
hwmon: (lm75) Add support for writing conversion time for TMP112
hwmon: (lm75) Move updating the sample interval to its own function
hwmon: (lm75) Support configuring the sample time for various chips
hwmon: (nct7904) Fix incorrect temperature limitation register setting of LTD.
hwmon: (as370-hwmon) Add DT bindings for Synaptics AS370 PVT
hwmon: Add Synaptics AS370 PVT sensor driver
pmbus: (ibm-cffps) Add support for version 2 of the PSU
dt-bindings: hwmon: Document ibm,cffps2 compatible string
hwmon: (iio_hwmon) Enable power exporting from IIO
...
-----BEGIN PGP SIGNATURE-----
iJYEABYIAD4WIQRE6pSOnaBC00OEHEIaerohdGur0gUCXW0lVyAcamFya2tvLnNh
a2tpbmVuQGxpbnV4LmludGVsLmNvbQAKCRAaerohdGur0sjdAQD3lpIS7YeT37Bu
QVdUkRObzkN3gWvv2oZkGXPg72843AD+KH0GL+M9SfBrYO/1StBJascarOHIIqUt
/1uqUgL7fAI=
=IV4V
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-next-20190902' of git://git.infradead.org/users/jjs/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"A new driver for fTPM living inside ARM TEE was added this round.
In addition to that, there are three bug fixes and one clean up"
* tag 'tpmdd-next-20190902' of git://git.infradead.org/users/jjs/linux-tpmdd:
tpm/tpm_ftpm_tee: Document fTPM TEE driver
tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE
tpm: Remove a deprecated comments about implicit sysfs locking
tpm_tis_core: Set TPM_CHIP_FLAG_IRQ before probing for interrupts
tpm_tis_core: Turn on the TPM before probing IRQ's
MAINTAINERS: fix style in KEYS-TRUSTED entry
* Fixing typos
* Adding missing of_node_put() in various drivers
Raw NAND controller drivers:
* Macronix: new controller driver
* Omap2: Fixing the number of bitflips returned
* Brcmnand: Fix a pointer not iterating over all the page chunks
* W90x900: Driver removed
* Onenand: Fix a memory leak
* Sharpsl: Missing include guard
* STM32: Avoid warnings when building with W=1
* Ingenic: Fix a coccinelle warning
* r852: Call a helper to simplify the code
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl1ny0EACgkQJWrqGEe9
VoSToQf9Gk13+TPg8oFu6tlmxuQlNU5Dpc+4Hmiahzb1IWwo9Deh2VtZaeWLqPob
uAisb1HByUD0shgoG6cgmVajULlFpmTdfwBQCPR1Wgvq5pejoOC1MQOMexaZ7Gjx
cj4DZEk15FFSR7/zSsN78kFDLFh590hUGfBLW55qE69M5xphmb42BVQUFn44Q/N2
yBvqwUQO/h8TsOS4FXGNc1X0U2/wYQQSOZ6grN3x105cY8Rp05T15a+Qxu22cBem
5IqPY4dwOTXjY5l0mHVIiO/Jk/N9bAgMSd1a15VVukiAL3oefH/kNpsI8T5d31f2
uNONC6GhRJj8c3GDmO8gZ6skzTPhIg==
=a6jq
-----END PGP SIGNATURE-----
Merge tag 'nand/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/for-5.4
NAND core
* Fixing typos
* Adding missing of_node_put() in various drivers
Raw NAND controller drivers:
* Macronix: new controller driver
* Omap2: Fixing the number of bitflips returned
* Brcmnand: Fix a pointer not iterating over all the page chunks
* W90x900: Driver removed
* Onenand: Fix a memory leak
* Sharpsl: Missing include guard
* STM32: Avoid warnings when building with W=1
* Ingenic: Fix a coccinelle warning
* r852: Call a helper to simplify the code
There is a spelling mistake on the documentation. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Herring <robh@kernel.org>
* Add AOSS QMP support
* Various fixups for Qualcomm SCM
* Add socinfo driver
* Add SoC serial number attribute and associated APIs
* Add SM8150 and SC7180 support in Qualcomm SCM
* Fixup max processor count in SMEM
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=MsUS
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm ARM Based Driver Updates for v5.4
* Add AOSS QMP support
* Various fixups for Qualcomm SCM
* Add socinfo driver
* Add SoC serial number attribute and associated APIs
* Add SM8150 and SC7180 support in Qualcomm SCM
* Fixup max processor count in SMEM
* tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: aoss: Add AOSS QMP support
dt-bindings: soc: qcom: aoss: Add SM8150 and SC7180 support
dt-bindings: firmware: scm: Add SM8150 and SC7180 support
dt-bindings: firmware: scm: re-order compatible list
soc: qcom: smem: Update max processor count
soc: qcom: socinfo: Annotate switch cases with fall through
soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.
soc: qcom: socinfo: Expose image information
soc: qcom: socinfo: Expose custom attributes
soc: qcom: Add socinfo driver
base: soc: Export soc_device_register/unregister APIs
base: soc: Add serial_number attribute to soc
firmware: qcom_scm: Cleanup code in qcom_scm_assign_mem()
firmware: qcom_scm: Fix some typos in docs and printks
firmware: qcom_scm: Use proper types for dma mappings
The devicetree bindings for anybus-controller were mistakenly
merged into the main Linux tree. Its driver resides in
staging/, so the bindings belong in staging/ too.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: 20a980e957 ("dt-bindings: anybus-controller: document devicetree binding")
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Link: https://lore.kernel.org/r/20190908134805.30957-1-TheSven73@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add documentation of ti,sgmii-ref-clock-output-enable
which can be used to select SGMII mode type (4 or 6-wire).
Signed-off-by: Vitaly Gaiduk <vitaly.gaiduk@cloudbear.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change documents the 'mac-mode' property that was introduced in the
'stmmac' driver to support passive mode converters that can sit in-between
the MAC & PHY.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new compatible to use the sdhc-arasan host controller driver
with the eMMC PHY on Intel's Lightning Mountain SoC.
Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The example node in the binding uses the AST2500 compatible string for
the SD controller with a 64kiB ranges property, but the SD controller is
allocated 128kiB of MMIO space according to the AST2500 datasheet. Fix
the example to correctly reflect the hardware in the AST2500, however it
should be noted that the MMIO region is reduced to 64kiB in the AST2600
where a second SD controller block has been introduced into the address
space.
Also add the IBM copyright header that I left out of the initial patch.
Suggested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The ASPEED SD/SDIO/MMC controller exposes two slots implementing the
SDIO Host Specification v2.00, with 1 or 4 bit data buses, or an 8 bit
data bus if only a single slot is enabled.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a new compatible for the additional emmc2 controller
on BCM2711 and clearify usage.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The conversion to the YAML binding left out two compatibles. Add them.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The MMC compatibles in the bindings are not ordered as they should, so
let's make sure it's sorted.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The ast2600 is a new generation of SoC from ASPEED. Similarly to the
ast2400 and ast2500, it has a GPIO controller for it's 3.3V GPIO pins.
Additionally, it has a GPIO controller for 36 1.8V GPIO pins. We use
the ngpio property to differentiate between these controllers.
Signed-off-by: Rashmica Gupta <rashmica.g@gmail.com>
Link: https://lore.kernel.org/r/20190906062547.13264-1-rashmica.g@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Convert Realtek SoC bindings to DT schema format using json-schema.
Andreas is the only author and we agreed in person on licensing to be
GPL2+/BSD.
Cc: "Andreas Färber" <afaerber@suse.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This adds the documentation to the compatible regulator-fixed-clock.
This binding is a special binding of regulator-fixed and adds the
ability to add a clock to regulator-fixed, so the regulator can be
enabled and disabled with that clock. If the special compatible
regulator-fixed-clock is used it is mandatory to supply a clock.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190910062103.39641-4-philippe.schenker@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds the binding documentation for
apmixedsys, audiosys, camsys, imgsys, ipesys,
infracfg, mfgcfg, mmsys, topckgen, vdecsys,
and vencsys for Mediatek MT6779.
Signed-off-by: mtk01761 <wendell.lin@mediatek.com>
Link: https://lkml.kernel.org/r/1566206502-4347-9-git-send-email-mars.cheng@mediatek.com
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
With clock parent data scheme we must specify the parent clocks for the
rpmhcc nodes. So describe the parent clock for rpmhcc in the bindings.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lkml.kernel.org/r/20190826173120.2971-2-vkoul@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This patch removes redundant null checks for optional MCLK clock.
And fix DT binding document for changing clock property to optional
from required.
Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20190907163653.9382-1-katsuhiro@katsuster.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Add optional bindings "vpcie3v3-supply" and "vpcie12v-supply" to describe
regulators of a PCIe slot's supplies 3.3V and 12V provided the platform
is designed to have regulator controlled slot supplies.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Add optional bindings "pinctrl-names" and "pinctrl-0" to describe pin
configuration information of a particular PCIe controller.
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
The UFS_RESET pin on Qualcomm SoCs are controlled by TLMM and exposed
through the GPIO framework. Acquire the device-reset GPIO and use this to
implement the device_reset vops, to allow resetting the attached memory.
Based on downstream support implemented by Subhash Jadavani
<subhashj@codeaurora.org>.
Link: https://lore.kernel.org/r/20190828191756.24312-3-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Large GICv3 updates to support new PPI and SPI ranges
- Conver all alloc_fwnode() users to use PAs instead of VAs
- Add support for Marvell's MMP3 irqchip
- Add support for Amlogic Meson SM1
- Various cleanups and fixes
-----BEGIN PGP SIGNATURE-----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=PsGr
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates for Linux 5.4 from Marc Zyngier:
- Large GICv3 updates to support new PPI and SPI ranges
- Conver all alloc_fwnode() users to use PAs instead of VAs
- Add support for Marvell's MMP3 irqchip
- Add support for Amlogic Meson SM1
- Various cleanups and fixes
The g12a audio subsystem, which is a derivative of the axg subsystem,
provides a dedicated reset line for each of the audio components.
The axg did not provide that and it is unclear if/when these reset are
required. The reset already helped solve a channel mapping issue on the
tdm formatter devices. Let's add the reset binding for the other
components, so we can describe this in DT. We'll use it later on
in the driver when/if needed.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20190905120120.31752-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
any market.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl1w+fEQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgaolB/9QiQc2k2HFAwQTS1RpvVW87yKdLXPhqBBs
HhagbY3ucMXDY38tZnLnbLis6CwdvkeHCCL6KC9XLzIgiJZHzXhb+QLiu9YLAw25
ymnWVtamVh0WmSNOBqex65fXwCQH9l/godI8BaxltllEkb472/jwainqHsVkFI7Z
idVGrTo9zgW7NTGQU88Rl6cagHLR6OpHBvc5meu7TIzGYF2U+Xx+x9TZw7BfdQ7u
gKZtIeRTFwsHdiBNbeU78znQCW/apCyzyKaIKW517TiXQsmsm/CEGai2/+XTN0ft
+QqHkXO7NBUh0cPZvBefq53EyDlvJbv1TW+XXP9d+TTFotTtJmXU
=PkdV
-----END PGP SIGNATURE-----
Merge tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Removal of the rk3288-fennec board which never made it to
any market.
* tag 'v5.4-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: arm: rockchip: remove reference to fennec board
ARM: dts: rockchip: remove rk3288 fennec board support
Link: https://lore.kernel.org/r/1718334.9BoTfW0Ujv@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is present in the AP6526 WiFi/Bluetooth 5.0 module.
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Add devicetree bindings for Rockchip cru which found on
Rockchip SoCs.
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEDaZUZmFxRG/wNThrSFkpgVDWcbsFAl1uCRoACgkQSFkpgVDW
cbv5swf/cHomRBrTFoH0r/qNr9M7flAbrZiwNmWdxef2PJSsc+2kUU3CpY7OGiGa
7/9bngHno8EpJuPiGsKKtOOMvsUz2vzreFuh7Rgss+no1Ct3B7bdkke/n06S52Rj
0SX3xqyuNL+J4IVrgByEcsrgxbSpwY5Yzx+7rAF4NJU0P6wrZht1VflYvhpRdE0y
RfrWdV9jKxEuE16FPZhu56u4FynuhO850+urixp+sqp8zQghVJOm0BTZCfI5WxAK
DZ42f9PnrhrIcYJ4JNLDE7QKTFHp08GVqLGkna1cwtUMq7INNW3ovXQk6r0Mu9Kv
Il0DIIW34kI5x+4gdUFQnnFhyb/clQ==
=wMNU
-----END PGP SIGNATURE-----
Merge tag 'usb-ci-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next
Peter writes:
Add role switch class support for chipidea
* tag 'usb-ci-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
usb: chipidea: msm: Use device-managed registration API
usb: chipidea: add role switch class support
dt-binding: usb: usbmisc-imx: add imx7ulp compatible
dt-binding: usb: ci-hdrc-usb2: add imx7ulp compatible
Tegra186 chip has a hardware issue resulting in frame errors when
tolerance level for baud rate is negative. Provided entries to adjust
baud rate to be within acceptable range and work with devices that
can send negative baud rate. Also report error when baud rate set is
out of tolerance range of controller updated in device tree.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/1567572187-29820-10-git-send-email-kyarlagadda@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add new compatible string for Tegra186. It differs from earlier chips
as it has FIFO mode enable check and 8 byte DMA buffer.
Add new compatible string for Tegra194. Tegra194 has different error
tolerance levels for baud rate compared to older chips.
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Link: https://lore.kernel.org/r/1567572187-29820-6-git-send-email-kyarlagadda@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEmvEkXzgOfc881GuFWsYho5HknSAFAl1uJGETHG1rbEBwZW5n
dXRyb25peC5kZQAKCRBaxiGjkeSdIMnjCACzqf14rTtjFAS86C1KIjRaQu6XEZt5
2VFq3WqFB3OVgcvtJISIuDk9sN2oY0f3z8mSSCn56qgy1YOCmYnUNMArp7pbFSim
oPaM10gF/2FS4TM58nofqEBN4+sYVp5u1Sx/RAqSqNN9Ga6n0AtgsIG9Tt26FZuy
e3LPZFlXh9vhsZshGSFBrn+jL7y+tsVUxE1nw9FZ8W+lnp/JiyVYVL5LDzTZA24N
i7U5ENGMyCsakuRa/pm+l/OkwIXAuEyvr0R6H0SOAxuAVI+shqhu0le7QmDVtbz5
PiHNShILoZQzd9j8N3m3QOpgwHSIbmBHueRhgNRM6NahO+PWe4R3dvbT
=TBQL
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.4-20190903' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2019-09-03
this is a pull request for net-next/master consisting of 15 patches.
The first patch is by Christer Beskow, targets the kvaser_pciefd driver
and fixes the PWM generator's frequency.
The next three patches are by Dan Murphy, the tcan4x5x is updated to use
a proper interrupts/interrupt-parent DT binding to specify the devices
IRQ line. Further the unneeded wake ups of the device is removed from
the driver.
A patch by me for the mcp25xx driver removes the deprecated board file
setup example. Three patches by Andy Shevchenko simplify clock handling,
update the driver from OF to device property API and simplify the
mcp251x_can_suspend() function.
The remaining 7 patches are by me and clean up checkpatch warnings in
the generic CAN device infrastructure.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ARM cpufreq driver changes for 5.4 from Viresh Kumar:
"This contains:
- Minor fixes for mediatek driver (Andrew-sh.Cheng and Fabien Parent).
- Minor updates for imx driver (Anson Huang).
- Minor fix for ti-cpufreq driver (Gustavo A. R. Silva).
- Minor fix for ap806 driver (Hariprasad Kelam).
- Significant updates to qcom cpufreq drivers, mostly to support CPR
stuff (Jorge Ramirez-Ortiz, Niklas Cassel, Sibi Sankar, Douglas
RAILLARD and Sricharan R).
- New sun50i cpufreq driver (Yangtao Li).
It also contains a few OPP changes which were required because of
dependencies for the qcom cpufreq changes."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (22 commits)
cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist
cpufreq: qcom: Add support for qcs404 on nvmem driver
cpufreq: qcom: Refactor the driver to make it easier to extend
cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
cpufreq: mediatek: Add support for mt8183
cpufreq: mediatek: change to regulator_get_optional
cpufreq: imx-cpufreq-dt: Add i.MX8MN support
cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading
cpufreq: qcom-hw: invoke frequency-invariance setter function
cpufreq: qcom-hw: Update logic to detect turbo frequency
cpufreq: mediatek-cpufreq: Add compatible for MT8516
cpufreq: ti-cpufreq: Mark expected switch fall-through
dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional
dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
opp: Add dev_pm_opp_find_level_exact()
opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()
opp: Not all power-domains are scalable
cpufreq: ap806: Add NULL check after kcalloc
...
Pull operating performance points (OPP) framework changes for 5.4
from Viresh Kumar:
"This contains:
- OPP core fixes to better support genpd devices (Viresh Kumar).
- OPP core changes to support multiple suspend-opps in DT (Anson Huang).
- New OPP API (dev_pm_opp_find_level_exact()) and Qcom OPP binding
changes for CPR (Niklas Cassel).
- Qcom minor update (Sricharan R).
- OPP Documentation fix (Yue Hu).
- OPP core support to enable/disable regulators (k.konieczny)."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR
dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain
dt-bindings: opp: qcom-nvmem: Make speedbin related properties optional
dt-bindings: opp: Re-organise kryo cpufreq to use it for other nvmem based qcom socs
PM / OPP: Correct Documentation about library location
opp: of: Support multiple suspend OPPs defined in DT
dt-bindings: opp: Support multiple opp-suspend properties
opp: core: add regulators enable and disable
opp: Don't decrement uninitialized list_kref
opp: Add dev_pm_opp_find_level_exact()
opp: Return genpd virtual devices from dev_pm_opp_attach_genpd()
opp: Not all power-domains are scalable
The timeriomem_rng driver only accesses the first 4 bytes of the given
memory area and currently, it also forces that memory resource to be
exactly 4 bytes in size.
This, however, is problematic when used with device-trees that are
generated from things like FPGA toolchains, where the minimum size
of an exposed memory block may be something like 4k.
Hence, let's only check for what's needed for the driver to operate
properly; namely that we have enough memory available to read the
random data from.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
MT7530 port 5 has many modes/configurations.
Update the documentation how to use port 5.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
TISCI protocol supports for enabling the device either with exclusive
permissions for the requesting host or with sharing across the hosts.
There are certain devices which are exclusive to Linux context and
there are certain devices that are shared across different host contexts.
So add support for getting this information from DT by increasing
the power-domain cells to 2.
Acked-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds device tree binding documentation for the driver communicating
with the rWTM firmware on Turris Mox.
Link: https://lore.kernel.org/r/20190822014318.19478-2-marek.behun@nic.cz
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add support for Turris Mox board (Armada 3720 SoC based)
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXW5eNQAKCRALBhiOFHI7
1aqnAJsGU/B3GFbhiuwI4+l3In7TMVVpIgCbB1T/eo1RJhvh9kH9zMj641Rmsk0=
=B8dQ
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu into arm/late
mvebu dt64 for 5.4 (part 2)
Add support for Turris Mox board (Armada 3720 SoC based)
* tag 'mvebu-dt64-5.4-2' of git://git.infradead.org/linux-mvebu: (53 commits)
arm64: dts: marvell: add DTS for Turris Mox
dt-bindings: marvell: document Turris Mox compatible
arm64: dts: marvell: armada-37xx: add SPI CS1 pinctrl
arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
arm64: dts: marvell: Convert 7k/8k usb-phy properties to phy-supply
arm64: dts: marvell: Add 7k/8k PHYs in PCIe nodes
arm64: dts: marvell: Add 7k/8k PHYs in USB3 nodes
arm64: dts: marvell: Add 7k/8k per-port PHYs in SATA nodes
arm64: dts: marvell: Add CP110 COMPHY clocks
arm64: dts: marvell: armada-37xx: add mailbox node
dt-bindings: gpio: Document GPIOs via Moxtet bus
drivers: gpio: Add support for GPIOs over Moxtet bus
bus: moxtet: Add sysfs and debugfs documentation
dt-bindings: bus: Document moxtet bus binding
bus: Add support for Moxtet bus
reset: Add support for resets provided by SCMI
firmware: arm_scmi: Add RESET protocol in SCMI v2.0
dt-bindings: arm: Extend SCMI to support new reset protocol
firmware: arm_scmi: Make use SCMI v2.0 fastchannel for performance protocol
firmware: arm_scmi: Add discovery of SCMI v2.0 performance fastchannels
...
Link: https://lore.kernel.org/r/87h85two0r.fsf@FE-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Typo fixes for gic-its unit addresses for both am654 and j721e
- HW spinlock nodes added for both am654 and j721e
- GPIO support for j721e
- power-domain cells update for both am654 / j721e for exclusive only
access
-----BEGIN PGP SIGNATURE-----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=OoxU
-----END PGP SIGNATURE-----
Merge tag 'ti-k3-soc-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/late
Texas Instruments K3 SoC family changes for 5.4
- Typo fixes for gic-its unit addresses for both am654 and j721e
- HW spinlock nodes added for both am654 and j721e
- GPIO support for j721e
- power-domain cells update for both am654 / j721e for exclusive only
access
* tag 'ti-k3-soc-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-j721e-main: Fix gic-its node unit-address
arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
arm64: dts: ti: k3-j721e-main: Add hwspinlock node
arm64: dts: ti: k3-am65-main: Add hwspinlock node
arm64: dts: k3-j721e: Add gpio-keys on common processor board
dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E
arm64: dts: ti: k3-j721e-common-proc-board: Disable unused gpio modules
arm64: dts: ti: k3-j721e: Add gpio nodes in wakeup domain
arm64: dts: ti: k3-j721e: Add gpio nodes in main domain
arm64: dts: ti: k3-j721e: Update the power domain cells
arm64: dts: ti: k3-am654: Update the power domain cells
soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
firmware: ti_sci: Allow for device shared and exclusive requests
Link: https://lore.kernel.org/r/b838d666-ab3b-7d41-67d4-09d606c732da@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add documentation for the serial communication interface module (LINFlexD),
found in two instances on S32V234.
Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: Larisa Grigore <Larisa.Grigore@nxp.com>
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190823191115.18490-7-stefan-gabriel.mirea@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a note for enabling wakeup capabilities of usart
Signed-off-by: Bich Hemon <bich.hemon@st.com>
Signed-off-by: Erwan Le Ray <erwan.leray@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1560433800-12255-2-git-send-email-erwan.leray@st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch adds bindings for Soundwire Slave devices that includes how
SoundWire enumeration address and Link ID are used to represented in
SoundWire slave device tree nodes.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20190829163514.11221-2-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The commit b37e3534ac ("dt-bindings: dmaengine: Add YAML schemas
for the generic DMA bindings") changed the property from
dma-channel-mask to dma-channel-masks. So, this patch fixes it.
Fixes: b37e3534ac ("dt-bindings: dmaengine: Add YAML schemas for the generic DMA bindings")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1566988223-14657-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Revised pull request to fix up a missing Signed-off-by and roll in
a fix in the lsm9ds1 support after I broke it when applying.
Revised again because the fix changed a hash meaning a fix
that previously followed it now had the wrong fixes tag.
A few fixes in here that could have gone a faster path but aren't quite
worth the rush for 5.3.
New device support
* ad7606
- Support the ad7606b which adds a software controlled mode alongside
the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
- Add support for the gyro and accelerometer part of the lsm9ds1 which is
a compound device also including a magnetometer (st_sensors driver).
Includes bindings and precursor rework of the driver.
Features
* ad7192
- Add support for low pass filter control.
- DT binding docs.
Cleanups and minor fixes
* MAINTAINERS
- Fix a typo in a path.
- Add entry for ad7606
* ad5380
- Fix a failure to dereference a pointer before atempting to assign the
value.
* ad7192
- Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
- YAML conversion for dt-bindings.
* adis16240
- Rework write_raw to make it more readable using GENMASK.
* adis16460
- Fix and issue with an unsigned variable holding potential negatives.
* cros_ec
- Fix missing default of calibration vector so that we get 'something'
before calibration is complete on a given axis.
* hid-sensors
- Use int_pow instead of opencoding.
* isl29501
- rename dt-binding docs to include renesas inline with other renesas parts
and general current convention.
* kxcjk1013
- Improve comments on the 'unusual' ACPI ids used to identify which sensor
is which in certain laptops.
* lsm6dsx
- Add one bit to the fifo status masks for a number of parts.
- Drop a reserved entry from the sensitivity values to tidy up interface.
- Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
to relate to the datasheet and consistent with other parts supported.
* max1027
- Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
- Typo in Kconfig help.
* sc27xx
- Switch to polling mode from interrupts as interrupt handling typically
to slow for very short sleeps.
* st-sensors
- Fix some missing selects for regmap.
* tools
- Add a .gitignore containing the binary outputs.
-----BEGIN PGP SIGNATURE-----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=rPVR
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, cleanups and features for IIO in the 5.4 cycle
Revised pull request to fix up a missing Signed-off-by and roll in
a fix in the lsm9ds1 support after I broke it when applying.
Revised again because the fix changed a hash meaning a fix
that previously followed it now had the wrong fixes tag.
A few fixes in here that could have gone a faster path but aren't quite
worth the rush for 5.3.
New device support
* ad7606
- Support the ad7606b which adds a software controlled mode alongside
the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
- Add support for the gyro and accelerometer part of the lsm9ds1 which is
a compound device also including a magnetometer (st_sensors driver).
Includes bindings and precursor rework of the driver.
Features
* ad7192
- Add support for low pass filter control.
- DT binding docs.
Cleanups and minor fixes
* MAINTAINERS
- Fix a typo in a path.
- Add entry for ad7606
* ad5380
- Fix a failure to dereference a pointer before atempting to assign the
value.
* ad7192
- Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
- YAML conversion for dt-bindings.
* adis16240
- Rework write_raw to make it more readable using GENMASK.
* adis16460
- Fix and issue with an unsigned variable holding potential negatives.
* cros_ec
- Fix missing default of calibration vector so that we get 'something'
before calibration is complete on a given axis.
* hid-sensors
- Use int_pow instead of opencoding.
* isl29501
- rename dt-binding docs to include renesas inline with other renesas parts
and general current convention.
* kxcjk1013
- Improve comments on the 'unusual' ACPI ids used to identify which sensor
is which in certain laptops.
* lsm6dsx
- Add one bit to the fifo status masks for a number of parts.
- Drop a reserved entry from the sensitivity values to tidy up interface.
- Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
to relate to the datasheet and consistent with other parts supported.
* max1027
- Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
- Typo in Kconfig help.
* sc27xx
- Switch to polling mode from interrupts as interrupt handling typically
to slow for very short sleeps.
* st-sensors
- Fix some missing selects for regmap.
* tools
- Add a .gitignore containing the binary outputs.
* tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
iio: cros_ec: set calibscale for 3d MEMS to unit vector
iio: dac: ad5380: fix incorrect assignment to val
iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1
iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct
iio: imu: st_lsm6dsx: introduce update_fifo function pointer
dt-bindings: iio: light: isl29501: Rename bindings documentation file
Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
iio: st_sensors: Fix build error
dt-bindings: iio: adc: Add AD7606B ADC documentation
dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
MAINTAINERS: Add Beniamin Bia for AD7606 driver
iio: adc: ad7606: Add support for AD7606B ADC
tools: iio: add .gitignore
iio: adc: sc27xx: Change to polling mode to read data
iio: hid-sensor-attributes: Convert to use int_pow()
iio: adc: max1027: Use device-managed APIs
...
Highlights
- clk-measure: support new S905X3 and A311D SoCs
- socinfo: support new S905X3 and A311D SoCs
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl1cbXEACgkQWTcYmtP7
xmU5iQ//btRUq8o4I2hnmoKMCpsfv9tWA8/CnepjH0/uXL8Dd8um7bBkB1BByog8
GSaLAxiL7C6WdUo9a206HP/FC7Rp9GpdBYSaGglbE4xng4LZpzhjQyuNhoozByFK
ak94py6kzt6V4/XC+DTFhDirIz9D0WAhsyS8iXdc9BVynLd290OXUNxWTM7kJpnh
NB3JuSEQB9JnXSBlNZ2cdoTFm2m/pujda17o4ycc4ZGFruNvXPHmcm9TvYns9id0
aS9oA3QXq7+dWS7Hpr0uwoxqE9KZGVKN8VEwKdKc4PNlv+1z6/3W3CzbxLhpQU+q
KK4bBBL99ZYaDb+lnxcuag+7yi8uRXG0aWZ2FkEoq+mKnOETodT8l/qVqf+3VHwF
zLj6QqVEQMPmBZnW0NXIHVXCdmwKIhZA49K0Nu835X99rWdqWWlgGIh8PPDehRfS
FC+Cd6IXK3VFKbssj9x59qGKle+jo2/mKe/roSnJlOp97JVUn/WXEBtRMcGs7DZf
SpXxFAtGKi5qS2VVV7Dn+O/3B4PFwOs3JCEJiE4r0V0dwDEN8e2bzRf1tS1pRDqi
SkUyNJ9gAnG2uFtTgost1ipGkfgqq4DLqA5GGiP/njxhPW83MuWp+KUuVorhVJTg
y2g4tQVe9BEJTMadkgLNhhBRwz7XWhchxWJbxiKdpuIA3SdHPVk=
=txyO
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: amlogic: driver updates for v5.4
Highlights
- clk-measure: support new S905X3 and A311D SoCs
- socinfo: support new S905X3 and A311D SoCs
* tag 'amlogic-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: meson-gx-socinfo: Add of_node_put() before return
soc: amlogic: clk-measure: Add support for SM1
dt-bindings: soc: amlogic: clk-measure: Add SM1 compatible
soc: amlogic: meson-gx-socinfo: Add SM1 and S905X3 IDs
soc: amlogic: meson-gx-socinfo: add A311D id
soc: amlogic: meson-clk-measure: add G12B second cluster cpu clk
soc: amlogic: meson-clk-measure: protect measure with a mutex
Link: https://lore.kernel.org/r/7h7e77cwv5.fsf@baylibre.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
*) Add a new PHY driver for Lantiq VRX200/ARX300 PCIe PHY
*) Add missing of_node_put() to a bunch of drivers using
for_each_available_child_of_node()
*) Add RXAUI/PCIe/SATA/USB3 support in Marvell's Armada
CP110 COMPHY
*) Other misc fixes and cleanup
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
-----BEGIN PGP SIGNATURE-----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=FzqB
-----END PGP SIGNATURE-----
Merge tag 'phy-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into char-misc-next
Kishon writes:
phy: for 5.4
*) Add a new PHY driver for Lantiq VRX200/ARX300 PCIe PHY
*) Add missing of_node_put() to a bunch of drivers using
for_each_available_child_of_node()
*) Add RXAUI/PCIe/SATA/USB3 support in Marvell's Armada
CP110 COMPHY
*) Other misc fixes and cleanup
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* tag 'phy-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (30 commits)
phy: marvell: phy-mvebu-cp110-comphy: rename instances of DLT
phy: marvell: phy-mvebu-cp110-comphy: implement RXAUI support
dt-bindings: pci: add PHY properties to Armada 7K/8K controller bindings
dt-bindings: phy: Add Marvell COMPHY clocks
phy: mvebu-cp110-comphy: Update comment about powering off all lanes at boot
phy: mvebu-cp110-comphy: Add PCIe support
phy: mvebu-cp110-comphy: Cosmetic change in a helper
phy: mvebu-cp110-comphy: Add SATA support
phy: mvebu-cp110-comphy: Add USB3 host/device support
phy: mvebu-cp110-comphy: Allow non-Ethernet modes to be configured
phy: mvebu-cp110-comphy: Rename the macro handling only Ethernet modes
phy: mvebu-cp110-comphy: Add RXAUI support
phy: mvebu-cp110-comphy: List already supported Ethernet modes
phy: mvebu-cp110-comphy: Add SMC call support
phy: mvebu-cp110-comphy: Explicitly initialize the lane submode
phy: mvebu-cp110-comphy: Add clocks support
phy-rockchip-inno-hdmi: Fix RK3328_TERM_RESISTOR_CALIB_SPEED_7_0's third value
phy: qcom-qmp: Correct ready status, again
phy: qualcomm: phy-qcom-qmp: Add of_node_put() before return
phy: renesas: rcar-gen3-usb2: Disable clearing VBUS in over-current
...
Here are the interconnect driver updates for the 5.4-rc1 merge window.
- New feature is the path tagging support that helps with grouping and
aggregating the bandwidth requests into separate buckets based on a tag.
- The first user of the path tagging is the Qualcomm sdm845 driver that
now implements support for wake/sleep sets. This allows consumer drivers
to express their bandwidth needs for the different CPU power states.
- New interconnect driver for the qcs404 platforms and a driver that
communicates bandwidth requests with remote processor over shared memory.
- Cleanups and fixes.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
-----BEGIN PGP SIGNATURE-----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=TVC/
-----END PGP SIGNATURE-----
Merge tag 'icc-5.4-rc1' of https://git.linaro.org/people/georgi.djakov/linux into char-misc-next
Georgi writes:
interconnect patches for 5.4
Here are the interconnect driver updates for the 5.4-rc1 merge window.
- New feature is the path tagging support that helps with grouping and
aggregating the bandwidth requests into separate buckets based on a tag.
- The first user of the path tagging is the Qualcomm sdm845 driver that
now implements support for wake/sleep sets. This allows consumer drivers
to express their bandwidth needs for the different CPU power states.
- New interconnect driver for the qcs404 platforms and a driver that
communicates bandwidth requests with remote processor over shared memory.
- Cleanups and fixes.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.4-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
drivers: qcom: Add BCM vote macro to header
interconnect: qcom: remove COMPILE_TEST from CONFIG_INTERCONNECT_QCOM_QCS404
interconnect: qcom: Add QCS404 interconnect provider driver
interconnect: qcom: Add interconnect RPM over SMD driver
dt-bindings: interconnect: Add Qualcomm QCS404 DT bindings
interconnect: qcom: Add tagging and wake/sleep support for sdm845
interconnect: Add pre_aggregate() callback
interconnect: Add support for path tags
The ipsps1 is an Inspur Power System power supply unit
Signed-off-by: John Wang <wangzqbj@inspur.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
A driver for ADS1015 with more functionality is available in the iio
subsystem.
Remove the hwmon driver as duplicate. If the chip is used for hardware
monitoring, the iio->hwmon bridge should be used.
Cc: Dirk Eibach <eibach@gdsys.de>
Link: https://lore.kernel.org/r/1562004758-13025-1-git-send-email-linux@roeck-us.net
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Detailed description for this pull request:
1. Clean up the and fix the minor issue of extcon provider driver
- extcon-arizona/max77843 replace the helper function
with more correct helper function without operation changes.
- extcon-fsa9480 supports the FSA880 variant by adding the compatible name.
- extcon-arizona updates the dt-binding file for the readability.
- extcon-gpio initializes the interrupt flags according to active-low state.
- Clean up extcon-sm5502/axp288/adc-jack
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=4VMi
-----END PGP SIGNATURE-----
Merge tag 'extcon-next-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next
Chanwoo writes:
Update extcon for 5.4
Detailed description for this pull request:
1. Clean up the and fix the minor issue of extcon provider driver
- extcon-arizona/max77843 replace the helper function
with more correct helper function without operation changes.
- extcon-fsa9480 supports the FSA880 variant by adding the compatible name.
- extcon-arizona updates the dt-binding file for the readability.
- extcon-gpio initializes the interrupt flags according to active-low state.
- Clean up extcon-sm5502/axp288/adc-jack
* tag 'extcon-next-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
extcon: adc-jack: Remove dev_err() usage after platform_get_irq()
extcon: axp288: Use for_each_set_bit() in axp288_extcon_log_rsi()
extcon: axp288: Add missed error check
extcon: sm5502: Add IRQ_ONESHOT
extcon: gpio: Request reasonable interrupts
extcon: arizona: Update binding example to use available defines
extcon: fsa9480: Support the FSA880 variant
extcon: extcon-max77843: convert to i2c_new_dummy_device
extcon: arizona: Switch to use device_property_count_u32()
Note the binding is st,lsm9ds1-imu. This device is effectively
two separate devices in the same package. (separate addreses,
chip selects etc) The magnetometer is already supported
as lsm9ds1-mag. imu may not be the best name but it's the best
that anyone has yet come up with for a gyro and accel part.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
- A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board
device tree support.
- Add DSP device tree support for i.MX8QXP SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdYom7AAoJEFBXWFqHsHzOVG8H/RTfCTmRCBaClVZ031GWl/Q2
2NP+AY1l8UE0NKsvEuoMf/VY1atvFNgDvbm4gV1PW5KOBbgZmB3M32lHvXfqbLOu
vACCc8b7JY/8scWUgQBNbE5xAiZjPkLPuIYNJTLmrgVrYkYhtkB/4pwAk9YjVlYt
eHF3SWizKmam8vV3yp6KUNKvEYPBiMBfjSHDUvgT0GHUB4SHpPm/ERruTdKxP0Zm
c730yvV320XiKvxuErdvNfsw6FWs8Bhp8xCIhvF4Wbm0w4c5ucuqHKSV1v63lbbj
GVfdi0cH/eKlugNhfhIH7RsYL5TYjCDwzEyBSnqGCaBW+gnTpRnFkEricgvB+yY=
=3nO3
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX device tree update with new clocks:
- A series from Anson Huang to add i.MX8MN SoC and DDR4 EVK board
device tree support.
- Add DSP device tree support for i.MX8QXP SoC.
* tag 'imx-dt-clkdep-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qxp: Add DSP DT node
arm64: dts: imx8mn: Add cpu-freq support
arm64: dts: imx8mn-ddr4-evk: Add rohm,bd71847 PMIC support
arm64: dts: imx8mn-ddr4-evk: Add i2c1 support
arm64: dts: freescale: Add i.MX8MN DDR4 EVK board support
arm64: dts: imx8mn: Add gpio-ranges property
arm64: dts: freescale: Add i.MX8MN dtsi support
clk: imx8: Add DSP related clocks
clk: imx: Add support for i.MX8MN clock driver
clk: imx: Add API for clk unregister when driver probe fail
clk: imx8mm: Make 1416X/1443X PLL macro definitions common for usage
dt-bindings: imx: Add clock binding doc for i.MX8MN
Link: https://lore.kernel.org/r/20190825153237.28829-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now the USB Role Switch is supported, so add properties about it,
and modify some description related.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1567070558-29417-5-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's used to support dual role switch via GPIO when use Type-B
receptacle, typically the USB ID pin is connected to an input
GPIO, and also used to enable/disable device when the USB Vbus
pin is connected to an input GPIO.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1567070558-29417-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a property usb-role-switch to tell the driver that use
USB Role Switch framework to handle the role switch,
it's useful when the driver has already supported other ways,
such as extcon framework etc.
Cc: Biju Das <biju.das@bp.renesas.com>
Cc: Yu Chen <chenyu56@huawei.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/1567070558-29417-2-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Our usual pile of patches for the next release, which include mostly:
- More fixes thanks to the DT validation using the YAML bindings
- IR receiver support on the H6
- SPDIF support on the H6
- I2C Support on the H6
- CSI support on the A20
- RTC support on the H6
- New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXV/6JgAKCRDj7w1vZxhR
xc+VAQDjZWvNeMX75qsrz7Jbdy7jlbJJ/oDFBGx3C4clcTn7tgD6AsHeM760Pc6o
4a7G5DGcJakuFGsb1s4hNQOylmG3IQ4=
=pXxO
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Allwinner DT changes for 5.4
Our usual pile of patches for the next release, which include mostly:
- More fixes thanks to the DT validation using the YAML bindings
- IR receiver support on the H6
- SPDIF support on the H6
- I2C Support on the H6
- CSI support on the A20
- RTC support on the H6
- New Boards: Lichee Zero Plus, Tanix TX6, A64-Olinuxino-eMMC
* tag 'sunxi-dt-for-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (40 commits)
arm64: dts: allwinner: orange-pi-3: Enable WiFi
ARM: dts: sunxi: Add missing watchdog clocks
ARM: dts: sunxi: Add missing watchdog interrupts
arm64: dts: allwinner: h6: Add support for RTC and fix the clock tree
ARM: dts: sun7i: Add CSI0 controller
arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)
dt-bindings: arm: sunxi: Add compatible for A64 OlinuXino with eMMC
ARM: dts: v3s: Change the timers compatible
ARM: dts: h3: Change the timers compatible
ARM: dts: a83t: Change the timers compatible
ARM: dts: a23/a33: Change the timers compatible
ARM: dts: sun6i: Add missing timers interrupts
ARM: dts: sun5i: Add missing timers interrupts
ARM: dts: sun4i: Add missing timers interrupts
dt-bindings: mfd: Convert Allwinner GPADC bindings to a schema
arm64: dts: allwinner: h6: Introduce Tanix TX6 board
dt-bindings: arm: sunxi: Add compatible for Tanix TX6 board
arm64: allwinner: h6: add I2C nodes
dt-bindings: i2c: mv64xxx: Add compatible for the H6 i2c node.
ARM: dts: sunxi: Add mdio bus sub-node to GMAC
...
Link: https://lore.kernel.org/r/d97e6252-9dd7-4cf5-a3cf-56f78b0ca455.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
the Kevin Chromebook and a new board the Leez P710 SBC.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl1X/7UQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgSeCB/4o5aQ6PRfpm+TnXIdiw1GqnhAp3lhQLtT/
jZkSAiANcH2tFyFiPOjPDARbnd7T2J8ZxfBzJt5/5z/VsCpwh0BQGJFXq4Htbnfj
d9YkhS7N9y1tRuCregpD/0LcKXSdttmYXiiHUzuL3FzNtU1U5buXf4pyDDwqtvNN
AYiKYvUixO+Sr3J71Ww4WWXZUt/m2VEN4MPvjjheMSWCSmSV3pw1yjKSb+MpovfP
tBdPjOCKizDm2W/+5eLCH4HbV6A7bp5GA4v71Qt9B5UT1RxdZ4befx9JJqgJteDw
uEyHiSyf4jdjczHAxMryuev0yiU2r/UsGGintDLMggpAI6dcXk9O
=52SD
-----END PGP SIGNATURE-----
Merge tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
PWM-Fan and nor-flash for the RockPro64, a better display mode for
the Kevin Chromebook and a new board the Leez P710 SBC.
* tag 'v5.4-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC
arm64: dts: rockchip: enable internal SPI flash for RockPro64.
arm64: dts: rockchip: Add PWM fan for RockPro64
arm64: dts: rockchip: Specify override mode for kevin panel
Link: https://lore.kernel.org/r/20190819141659.26414-1-dinguyen@kernel.org
Link: https://lore.kernel.org/r/2362486.gYoCZEsBuK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
areas and also a 100ms speedup as a delay isn't needed anymore.
New boards are Tiger and Fievel from the Veyron family and the Mecer Xtreme
Mini S6, which I think is the first consumer-grade rk3229-based device in
the kernel.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAl1X/0cQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgT2RB/0X8SGcSRLL6vGCBH4vbATtnh1ceh6O2GA8
NO1N+OgQjPQWQyVx8ZWb7oaWgECwnXn41WT1HP9t0KB4w4sILZEswJrDRKV0dj1o
g+8tpgdxzJ7YF+vEkW1EcdPU2d1bRBJZ4qN38t2/StWg5WCrfThM2zBEUEJyWHpr
QYfSVXmhvPHISyZE+/k0tdgBhEi3KQph7ZVPhsmhugd1PeIV5lMDTVx4H7ljdnuC
/rVM/Yj+93r23bMgp6VGaMQmidlymYWCwxdTM4d4vDozViaykJ38BwDKVzfXX99y
hxA2BxKjp+37tuy4r4IO3kuqTEH6b4rvZzdNxJwBrGmIcBfv3n9j
=b567
-----END PGP SIGNATURE-----
Merge tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
A lot more love for Veyron devices with cleanups in the display and wifi
areas and also a 100ms speedup as a delay isn't needed anymore.
New boards are Tiger and Fievel from the Veyron family and the Mecer Xtreme
Mini S6, which I think is the first consumer-grade rk3229-based device in
the kernel.
* tag 'v5.4-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: add device tree for Mecer Xtreme Mini S6
Revert "ARM: dts: rockchip: add startup delay to rk3288-veyron panel-regulators"
ARM: dts: rockchip: Add pin names for rk3288-veyron fievel
ARM: dts: rockchip: A few fixes for veyron-{fievel,tiger}
ARM: dts: rockchip: Cleanup style around assignment operator
ARM: dts: rockchip: add veyron-tiger board
ARM: dts: rockchip: add veyron-fievel board
dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-{fievel,tiger}
ARM: dts: rockchip: consolidate veyron panel and backlight settings
ARM: dts: rockchip: move rk3288-veryon display settings into a separate file
ARM: dts: rockchip: Limit WiFi TX power on rk3288-veyron-jerry
ARM: dts: rockchip: Specify rk3288-veyron-minnie's display timings
ARM: dts: rockchip: Specify rk3288-veyron-chromebook's display timings
Link: https://lore.kernel.org/r/1611583.rKl1eQBRh8@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds support for the new ASPEED AST2600 BMC SoC.
-----BEGIN PGP SIGNATURE-----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=KLEf
-----END PGP SIGNATURE-----
Merge tag 'aspeed-5.4-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/soc
ASPEED architecture updates for 5.4
This adds support for the new ASPEED AST2600 BMC SoC.
* tag 'aspeed-5.4-arch' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: aspeed: Enable SMP boot
ARM: aspeed: Add ASPEED AST2600 architecture
ARM: aspeed: Select timer in each SoC
dt-bindings: arm: cpus: Add ASPEED SMP
Link: https://lore.kernel.org/r/CACPK8Xc1aSp5fXL3cEzC9SJsCXG2JwsSPpQrW3a09dkvhCyHHA@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove the data-ready-gpio property in favor of the DT standard
interrupt-parent and interrupts.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add qcom-opp bindings with properties needed for Core Power Reduction
(CPR).
CPR is included in a great variety of Qualcomm SoCs, e.g. msm8916 and
msm8996. CPR was first introduced in msm8974.
Co-developed-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Some Qualcomm SoCs have support for Core Power Reduction (CPR).
On these platforms, we need to attach to the power domain provider
providing the performance states, so that the leaky device (the CPU)
can configure the performance states (which represent different
CPU clock frequencies).
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.
The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
-----BEGIN PGP SIGNATURE-----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=KUJN
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: Changes for v5.4 merge window
With only 45 non-merge commits, we have a small merge window from the
Gadget perspective.
The biggest change here is the addition of the Cadence USB3 DRD
Driver. All other changes are small, non-critical fixes or smaller new
features like the improvement to BESL handling in dwc3.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* tag 'usb-for-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (45 commits)
usb: gadget: net2280: Add workaround for AB chip Errata 11
usb: gadget: net2280: Move all "ll" registers in one structure
usb: dwc3: gadget: Workaround Mirosoft's BESL check
usb:cdns3 Fix for stuck packets in on-chip OUT buffer.
usb: cdns3: Add Cadence USB3 DRD Driver
usb: common: Simplify usb_decode_get_set_descriptor function.
usb: common: Patch simplify usb_decode_set_clear_feature function.
usb: common: Separated decoding functions from dwc3 driver.
dt-bindings: add binding for USBSS-DRD controller.
usb: gadget: composite: Set recommended BESL values
usb: dwc3: gadget: Set BESL config parameter
usb: dwc3: Separate field holding multiple properties
usb: gadget: Export recommended BESL values
usb: phy: phy-fsl-usb: Make structure fsl_otg_initdata constant
usb: udc: lpc32xx: silence fall-through warning
usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
usb: udc: lpc32xx: remove set but not used 3 variables
usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
usb: dwc3: st: Add of_dev_put() in probe function
usb: dwc3: st: Add of_node_put() before return in probe function
...
This switches the driver over to the standard touchscreen properties for
coordinate transformation, while keeping old bindings working as well.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of trying to map INT GPIO to interrupt, let's use one supplied by
I2C client. If there is none - bail. This will also allow us to treat INT
GPIO as optional, as per the binding.
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This driver can use GPIO descriptors rather than GPIO numbers
without any problems, convert it. Name the field variables after
the actual pins on the chip rather than the "reset" and "touch"
names from the devicetree bindings that are vaguely inaccurate.
No in-tree users pass GPIO numbers in platform data so drop
this. Descriptor tables can be used to get these GPIOs from a board
file if need be.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The paragraph explains the use of wakup-delay, as defined above.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Replace abbreviations "eg" and "ie" by "e.g." resp. "i.e." for
consistency.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The device-tree properties documentation-file specifies the property
"microchip,spi-present-mask" as required for MCP23SXX chips. However,
the device-tree-source example below it uses only "spi-present-mask".
Without "microchip," on the front, the driver will print "missing
spi-present-mask" when it initializes.
Update the device-tree example with the correct property-name.
Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
- Add Power Controller section to existing binding document.
- Add MT6323 PWRC bindings document with example.
Suggested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Add MT6323 to RTC bindings.
Signed-off-by: Josef Friedl <josef.friedl@speed.at>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Paths in dt-bindings should be relative as suggested by Lee Jones.
Suggested-By: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the documentation for the Turris Mox compatible in armada-37xx
device-tree binding documentation.
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Cc: Gregory CLEMENT <gregory.clement@bootlin.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The Allwinner A64 SoC has an embedded audio codec that uses a separate
controller to drive its analog part, which is supported in Linux, with a
matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190828125209.28173-5-mripard@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Allwinner A33 SoC have an embedded audio codec that is supported in Linux,
with a matching Device Tree binding.
Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190828125209.28173-3-mripard@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Even though the H6 compatible has been properly added, the exeption for the
number of DMA channels hasn't been updated, leading in a validation
warning.
Fix this.
Fixes: b204530314 ("dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190828125209.28173-1-mripard@kernel.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the dt-binding to add support for the sm1 SoC family in the
amlogic GPIO interrupt controller driver.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20190829161635.25067-2-jbrunet@baylibre.com
This patch adds decriptions for mt8183 IOMMU and SMI.
mt8183 has only one M4U like mt8173 and is also MTK IOMMU gen2 which
uses ARM Short-Descriptor translation table format.
The mt8183 M4U-SMI HW diagram is as below:
EMI
|
M4U
|
----------
| |
gals0-rx gals1-rx
| |
| |
gals0-tx gals1-tx
| |
------------
SMI Common
------------
|
+-----+-----+--------+-----+-----+-------+-------+
| | | | | | | |
| | gals-rx gals-rx | gals-rx gals-rx gals-rx
| | | | | | | |
| | | | | | | |
| | gals-tx gals-tx | gals-tx gals-tx gals-tx
| | | | | | | |
larb0 larb1 IPU0 IPU1 larb4 larb5 larb6 CCU
disp vdec img cam venc img cam
All the connections are HW fixed, SW can NOT adjust it.
Compared with mt8173, we add a GALS(Global Async Local Sync) module
between SMI-common and M4U, and additional GALS between larb2/3/5/6
and SMI-common. GALS can help synchronize for the modules in different
clock frequency, it can be seen as a "asynchronous fifo".
GALS can only help transfer the command/data while it doesn't have
the configuring register, thus it has the special "smi" clock and it
doesn't have the "apb" clock. From the diagram above, we add "gals0"
and "gals1" clocks for smi-common and add a "gals" clock for smi-larb.
>From the diagram above, IPU0/IPU1(Image Processor Unit) and CCU(Camera
Control Unit) is connected with smi-common directly, we can take them
as "larb2", "larb3" and "larb7", and their register spaces are
different with the normal larb.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
The Khadas VIM3 is also available as VIM3L with the Pin-to-pin compatible
Amlogic SM1 SoC in the S905D3 variant package.
Change the description to match the S905X3/D3/Y3 variants like the G12A
description, and add the khadas,vim3l compatible.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the bindings for the Amlogic Everything-Else power domains,
controlling the Everything-Else peripherals power domains.
The bindings targets the Amlogic G12A and SM1 compatible SoCs,
support for earlier SoCs will be added later.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reading the description about when to use interrupts-extended leads some
developers to think that it shouldn't be used unless a device has
interrupts from more than one interrupt controller. This isn't true. We
should encourage devicetree writers to use this property in situations
where it isn't the inherited interrupt-parent so that we have less
properties in a DT node by virtue of not having to specify an
interrupt-parent and an interrupts property.
Reported-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Add a new compatible for the BCM2711, which hasn't the clock stretch bug.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This patch aim at documenting USB related dt-bindings for the
Cadence USBSS-DRD controller.
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Add documentation for the marvell,ecc-enable properties which can be
used to enable ECC on the Marvell aurora cache.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Convert the Arm Utgard GPU binding to DT schema format.
'allwinner,sun8i-a23-mali' compatible was not documented, so add it.
The 'clocks' property is now required. This simplifies the schema as
effectively all the users require 'clocks' already and the upstream
driver requires clocks.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Arm Bifrost GPU binding to DT schema format.
The 'clocks' property is now required. This simplifies the schema as
effectively all the users require 'clocks' already and the upstream
driver requires at least one clock.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Arm Midgard GPU binding to DT schema format.
The 'clocks' property is now required. This simplifies the schema as
effectively all the users require 'clocks' already and the upstream
driver requires at least one clock.
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Rob Herring <robh@kernel.org>
As per the discussion with Nicolas Ferre[0], rename the compatible property
to a more appropriate and specific string.
[0] https://lore.kernel.org/netdev/CAJ2_jOFEVZQat0Yprg4hem4jRrqkB72FKSeQj4p8P5KA-+rgww@mail.gmail.com/
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some platforms like i.MX8M series SoCs have clock control for TMU,
add optional clocks property to the binding doc.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
This patch the removes the recently added mediatek,physpeed property.
Use the fixed-link property speed = <2500> to set the phy in 2.5Gbit.
See mt7622-bananapi-bpi-r64.dts for a working example.
Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SY20276 is an I2C-controlled adjustable voltage regulator made by
Silergy Corp. The differences between SY8824C and SY20278 are
different regs for mode/enable.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163754.170cf130@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
SY20276 is an I2C-controlled adjustable voltage regulator made by
Silergy Corp. The differences between SY8824C and SY20276 are
different vsel_min, vsel_step, vsel_count and regs for mode/enable.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163650.47ed1213@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
SY8824E is an I2C-controlled adjustable voltage regulator made by
Silergy Corp. The only difference between SY8824C and SY8824E is the
vsel_min.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163505.361890af@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
SY8824C is an I2C-controlled adjustable voltage regulator made by
Silergy Corp.
Add its device tree binding.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190827163341.61df63a7@xhacker.debian
Signed-off-by: Mark Brown <broonie@kernel.org>
- Support for Edge Triggered IRQs in ARC IDU intc
- other fixes here and there
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=CJKr
-----END PGP SIGNATURE-----
Merge tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC updates from Vineet Gupta:
- support for Edge Triggered IRQs in ARC IDU intc
- other fixes here and there
* tag 'arc-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
arc: prefer __section from compiler_attributes.h
dt-bindings: IDU-intc: Add support for edge-triggered interrupts
dt-bindings: IDU-intc: Clean up documentation
ARCv2: IDU-intc: Add support for edge-triggered interrupts
ARC: unwind: Mark expected switch fall-throughs
ARC: [plat-hsdk]: allow to switch between AXI DMAC port configurations
ARC: fix typo in setup_dma_ops log message
ARCv2: entry: early return from exception need not clear U & DE bits
Linus Torvalds