Sync code to the same with tk4 pub/lts/0017-kabi, except deleted rue
and wujing. Partners can submit pull requests to this branch, and we
can pick the commits to tk4 pub/lts/0017-kabi easly.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Gitee limit the repo's size to 3GB, to reduce the size of the code,
sync codes to ock 5.4.119-20.0009.21 in one commit.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
Sync kernel codes to the same with 590eaf1fec ("Init Repo base on
linux 5.4.32 long term, and add base tlinux kernel interfaces."), which
is from tk4, and it is the base of tk4.
Signed-off-by: Jianping Liu <frankjpliu@tencent.com>
When the topology of root domains is modified by CPUset or CPUhotplug
operations information about the current deadline bandwidth held in the
root domain is lost.
This patch addresses the issue by recalculating the lost deadline
bandwidth information by circling through the deadline tasks held in
CPUsets and adding their current load to the root domain they are
associated with.
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
[ Various additional modifications. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-4-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=g8xI
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20190715' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A later pull request with some followup items. I had some vacation
coming up to the merge window, so certain things items were delayed a
bit. This pull request also contains fixes that came in within the
last few days of the merge window, which I didn't want to push right
before sending you a pull request.
This contains:
- NVMe pull request, mostly fixes, but also a few minor items on the
feature side that were timing constrained (Christoph et al)
- Report zones fixes (Damien)
- Removal of dead code (Damien)
- Turn on cgroup psi memstall (Josef)
- block cgroup MAINTAINERS entry (Konstantin)
- Flush init fix (Josef)
- blk-throttle low iops timing fix (Konstantin)
- nbd resize fixes (Mike)
- nbd 0 blocksize crash fix (Xiubo)
- block integrity error leak fix (Wenwen)
- blk-cgroup writeback and priority inheritance fixes (Tejun)"
* tag 'for-linus-20190715' of git://git.kernel.dk/linux-block: (42 commits)
MAINTAINERS: add entry for block io cgroup
null_blk: fixup ->report_zones() for !CONFIG_BLK_DEV_ZONED
block: Limit zone array allocation size
sd_zbc: Fix report zones buffer allocation
block: Kill gfp_t argument of blkdev_report_zones()
block: Allow mapping of vmalloc-ed buffers
block/bio-integrity: fix a memory leak bug
nvme: fix NULL deref for fabrics options
nbd: add netlink reconfigure resize support
nbd: fix crash when the blksize is zero
block: Disable write plugging for zoned block devices
block: Fix elevator name declaration
block: Remove unused definitions
nvme: fix regression upon hot device removal and insertion
blk-throttle: fix zero wait time for iops throttled group
block: Fix potential overflow in blk_report_zones()
blkcg: implement REQ_CGROUP_PUNT
blkcg, writeback: Implement wbc_blkcg_css()
blkcg, writeback: Add wbc->no_cgroup_owner
blkcg, writeback: Rename wbc_account_io() to wbc_account_cgroup_owner()
...
Pull networking updates from David Miller:
"Some highlights from this development cycle:
1) Big refactoring of ipv6 route and neigh handling to support
nexthop objects configurable as units from userspace. From David
Ahern.
2) Convert explored_states in BPF verifier into a hash table,
significantly decreased state held for programs with bpf2bpf
calls, from Alexei Starovoitov.
3) Implement bpf_send_signal() helper, from Yonghong Song.
4) Various classifier enhancements to mvpp2 driver, from Maxime
Chevallier.
5) Add aRFS support to hns3 driver, from Jian Shen.
6) Fix use after free in inet frags by allocating fqdirs dynamically
and reworking how rhashtable dismantle occurs, from Eric Dumazet.
7) Add act_ctinfo packet classifier action, from Kevin
Darbyshire-Bryant.
8) Add TFO key backup infrastructure, from Jason Baron.
9) Remove several old and unused ISDN drivers, from Arnd Bergmann.
10) Add devlink notifications for flash update status to mlxsw driver,
from Jiri Pirko.
11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski.
12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes.
13) Various enhancements to ipv6 flow label handling, from Eric
Dumazet and Willem de Bruijn.
14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van
der Merwe, and others.
15) Various improvements to axienet driver including converting it to
phylink, from Robert Hancock.
16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean.
17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana
Radulescu.
18) Add devlink health reporting to mlx5, from Moshe Shemesh.
19) Convert stmmac over to phylink, from Jose Abreu.
20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from
Shalom Toledo.
21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera.
22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel.
23) Track spill/fill of constants in BPF verifier, from Alexei
Starovoitov.
24) Support bounded loops in BPF, from Alexei Starovoitov.
25) Various page_pool API fixes and improvements, from Jesper Dangaard
Brouer.
26) Just like ipv4, support ref-countless ipv6 route handling. From
Wei Wang.
27) Support VLAN offloading in aquantia driver, from Igor Russkikh.
28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy.
29) Add flower GRE encap/decap support to nfp driver, from Pieter
Jansen van Vuuren.
30) Protect against stack overflow when using act_mirred, from John
Hurley.
31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen.
32) Use page_pool API in netsec driver, Ilias Apalodimas.
33) Add Google gve network driver, from Catherine Sullivan.
34) More indirect call avoidance, from Paolo Abeni.
35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan.
36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek.
37) Add MPLS manipulation actions to TC, from John Hurley.
38) Add sending a packet to connection tracking from TC actions, and
then allow flower classifier matching on conntrack state. From
Paul Blakey.
39) Netfilter hw offload support, from Pablo Neira Ayuso"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits)
net/mlx5e: Return in default case statement in tx_post_resync_params
mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync().
net: dsa: add support for BRIDGE_MROUTER attribute
pkt_sched: Include const.h
net: netsec: remove static declaration for netsec_set_tx_de()
net: netsec: remove superfluous if statement
netfilter: nf_tables: add hardware offload support
net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload
net: flow_offload: add flow_block_cb_is_busy() and use it
net: sched: remove tcf block API
drivers: net: use flow block API
net: sched: use flow block API
net: flow_offload: add flow_block_cb_{priv, incref, decref}()
net: flow_offload: add list handling functions
net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free()
net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_*
net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND
net: flow_offload: add flow_block_cb_setup_simple()
net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC
net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC
...
btrfs is going to use css_put() and wbc helpers to improve cgroup
writeback support. Add dummy css_get() definition and export wbc
helpers to prepare for module and !CONFIG_CGROUP builds.
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cgroup already uses floating point for percent[ile] numbers and there
are several controllers which want to take them as input. Add a
generic parse helper to handle inputs.
Update the interface convention documentation about the use of
percentage numbers. While at it, also clarify the default time unit.
Signed-off-by: Tejun Heo <tj@kernel.org>
CSS_TASK_ITER_PROCS currently iterates live group leaders; however,
this means that a process with dying leader and live threads will be
skipped. IOW, cgroup.procs might be empty while cgroup.threads isn't,
which is confusing to say the least.
Fix it by making cset track dying tasks and include dying leaders with
live threads in PROCS iteration.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Topi Miettinen <toiwoton@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
When a task is moved out of a cset, task iterators pointing to the
task are advanced using the normal css_task_iter_advance() call. This
is fine but we'll be tracking dying tasks on csets and thus moving
tasks from cset->tasks to (to be added) cset->dying_tasks. When we
remove a task from cset->tasks, if we advance the iterators, they may
move over to the next cset before we had the chance to add the task
back on the dying list, which can allow the task to escape iteration.
This patch separates out skipping from advancing. Skipping only moves
the affected iterators to the next pointer rather than fully advancing
it and the following advancing will recognize that the cursor has
already been moved forward and do the rest of advancing. This ensures
that when a task moves from one list to another in its cset, as long
as it moves in the right direction, it's always visible to iteration.
This doesn't cause any visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
A PF_EXITING task can stay associated with an offline css. If such
task calls task_get_css(), it can get stuck indefinitely. This can be
triggered by BSD process accounting which writes to a file with
PF_EXITING set when racing against memcg disable as in the backtrace
at the end.
After this change, task_get_css() may return a css which was already
offline when the function was called. None of the existing users are
affected by this change.
INFO: rcu_sched self-detected stall on CPU
INFO: rcu_sched detected stalls on CPUs/tasks:
...
NMI backtrace for cpu 0
...
Call Trace:
<IRQ>
dump_stack+0x46/0x68
nmi_cpu_backtrace.cold.2+0x13/0x57
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x9e/0xce
rcu_check_callbacks.cold.74+0x2af/0x433
update_process_times+0x28/0x60
tick_sched_timer+0x34/0x70
__hrtimer_run_queues+0xee/0x250
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x56/0x110
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:balance_dirty_pages_ratelimited+0x28f/0x3d0
...
btrfs_file_write_iter+0x31b/0x563
__vfs_write+0xfa/0x140
__kernel_write+0x4f/0x100
do_acct_process+0x495/0x580
acct_process+0xb9/0xdb
do_exit+0x748/0xa00
do_group_exit+0x3a/0xa0
get_signal+0x254/0x560
do_signal+0x23/0x5c0
exit_to_usermode_loop+0x5d/0xa0
prepare_exit_to_usermode+0x53/0x80
retint_user+0x8/0x8
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org # v4.2+
Fixes: ec438699a9 ("cgroup, block: implement task_get_css() and use it in bio_associate_current()")
Currently the lifetime of bpf programs attached to a cgroup is bound
to the lifetime of the cgroup itself. It means that if a user
forgets (or intentionally avoids) to detach a bpf program before
removing the cgroup, it will stay attached up to the release of the
cgroup. Since the cgroup can stay in the dying state (the state
between being rmdir()'ed and being released) for a very long time, it
leads to a waste of memory. Also, it blocks a possibility to implement
the memcg-based memory accounting for bpf objects, because a circular
reference dependency will occur. Charged memory pages are pinning the
corresponding memory cgroup, and if the memory cgroup is pinning
the attached bpf program, nothing will be ever released.
A dying cgroup can not contain any processes, so the only chance for
an attached bpf program to be executed is a live socket associated
with the cgroup. So in order to release all bpf data early, let's
count associated sockets using a new percpu refcounter. On cgroup
removal the counter is transitioned to the atomic mode, and as soon
as it reaches 0, all bpf programs are detached.
Because cgroup_bpf_release() can block, it can't be called from
the percpu ref counter callback directly, so instead an asynchronous
work is scheduled.
The reference counter is not socket specific, and can be used for any
other types of programs, which can be executed from a cgroup-bpf hook
outside of the process context, had such a need arise in the future.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: jolsa@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A task should never enter the exit path with the task->frozen bit set.
Any frozen task must enter the signal handling loop and the only
way to escape is through cgroup_leave_frozen(true), which
unconditionally drops the task->frozen bit. So it means that
cgroyp_freezer_frozen_exit() has zero chances to be called and
has to be removed.
Let's put a WARN_ON_ONCE() instead of the cgroup_freezer_frozen_exit()
call to catch any potential leak of the task's frozen bit.
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cgroup v1 implements the freezer controller, which provides an ability
to stop the workload in a cgroup and temporarily free up some
resources (cpu, io, network bandwidth and, potentially, memory)
for some other tasks. Cgroup v2 lacks this functionality.
This patch implements freezer for cgroup v2.
Cgroup v2 freezer tries to put tasks into a state similar to jobctl
stop. This means that tasks can be killed, ptraced (using
PTRACE_SEIZE*), and interrupted. It is possible to attach to
a frozen task, get some information (e.g. read registers) and detach.
It's also possible to migrate a frozen tasks to another cgroup.
This differs cgroup v2 freezer from cgroup v1 freezer, which mostly
tried to imitate the system-wide freezer. However uninterruptible
sleep is fine when all tasks are going to be frozen (hibernation case),
it's not the acceptable state for some subset of the system.
Cgroup v2 freezer is not supporting freezing kthreads.
If a non-root cgroup contains kthread, the cgroup still can be frozen,
but the kthread will remain running, the cgroup will be shown
as non-frozen, and the notification will not be delivered.
* PTRACE_ATTACH is not working because non-fatal signal delivery
is blocked in frozen state.
There are some interface differences between cgroup v1 and cgroup v2
freezer too, which are required to conform the cgroup v2 interface
design principles:
1) There is no separate controller, which has to be turned on:
the functionality is always available and is represented by
cgroup.freeze and cgroup.events cgroup control files.
2) The desired state is defined by the cgroup.freeze control file.
Any hierarchical configuration is allowed.
3) The interface is asynchronous. The actual state is available
using cgroup.events control file ("frozen" field). There are no
dedicated transitional states.
4) It's allowed to make any changes with the cgroup hierarchy
(create new cgroups, remove old cgroups, move tasks between cgroups)
no matter if some cgroups are frozen.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
No-objection-from-me-by: Oleg Nesterov <oleg@redhat.com>
Cc: kernel-team@fb.com
The only user of cgroup_subsys->free() callback is pids_cgrp_subsys which
needs pids_free() to uncharge the pid.
However, ->free() is called from __put_task_struct()->cgroup_free() and this
is too late. Even the trivial program which does
for (;;) {
int pid = fork();
assert(pid >= 0);
if (pid)
wait(NULL);
else
exit(0);
}
can run out of limits because release_task()->call_rcu(delayed_put_task_struct)
implies an RCU gp after the task/pid goes away and before the final put().
Test-case:
mkdir -p /tmp/CG
mount -t cgroup2 none /tmp/CG
echo '+pids' > /tmp/CG/cgroup.subtree_control
mkdir /tmp/CG/PID
echo 2 > /tmp/CG/PID/pids.max
perl -e 'while ($p = fork) { wait; } $p // die "fork failed: $!\n"' &
echo $! > /tmp/CG/PID/cgroup.procs
Without this patch the forking process fails soon after migration.
Rename cgroup_subsys->free() to cgroup_subsys->release() and move the callsite
into the new helper, cgroup_release(), called by release_task() which actually
frees the pid(s).
Reported-by: Herton R. Krzesinski <hkrzesin@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The previous patch in this series removed carrying around a pointer to
the css in blkg. However, the blkg association logic still relied on
taking a reference on the css to ensure we wouldn't fail in getting a
reference for the blkg.
Here the implicit dependency on the css is removed. The association
continues to rely on the tryget logic walking up the blkg tree. This
streamlines the three ways that association can happen: normal, swap,
and writeback.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAlvchGgQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpj/1D/4kEQx4ncnFoZk8QshHV1L++rH3BbcLjQDd
Wbh9ZSIQdI/gHTzS6bE7x3YfcbpMWPMO3+jFawdfRiFTEjlF8vQ+mnJ+Btb3z4D6
mGEeFGVhHExlp2a0x/Ma8YWVNlMB7BE8Tq73bZEVMY+9lbpmDW/vp7Sfa87LBDKQ
ZmY+My+VdHN7qLtQ7t3W/HtpbU+kcXMMd3ICjK4i+ofXy6mynk4+oQ2jwyXc5L86
UCJCsTsSRr3CgbnkW/uprHo0XHk8i7O/4C3oR+x4pAIxCCa9g+vmw0EO9fvi/2iQ
qe8jKdm7Y09xu/TiPBa7iz45tdh0cNMJKo3OezmSF9Np+r69KL5C/U4GRPKN3Iwm
keoqn14ScABkYMSe4ys1AdEgKD6bNUaW3r/lJxTH2oUR23mjnCLp7c4WD/G+MlbB
CzoakQyCHTZmDFLr2Kc8bkjmpil2T2UFfmLIDAu30LWIYeSGpiIO/V+g1foJMF2f
06ERltNvgX1BJjoh4NSWySLEf1ZtkUU60NeATRol6gwhnIyLrHsgfm6OEhqlW/7x
Xc1BWyzX7K6c3Dskk/u5aSRyXOyRC9KkMt3/2XexeDNHkte9yMH0IgSvopPBuER8
+iPvPjNp7ychTKZB3zpSnlqGgePTjbufIEBtO3OyUmDZKjUqxahtxkQfmPhoclu+
XdR4ArcqNg==
=0zM4
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20181102' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"The biggest part of this pull request is the revert of the blkcg
cleanup series. It had one fix earlier for a stacked device issue, but
another one was reported. Rather than play whack-a-mole with this,
revert the entire series and try again for the next kernel release.
Apart from that, only small fixes/changes.
Summary:
- Indentation fixup for mtip32xx (Colin Ian King)
- The blkcg cleanup series revert (Dennis Zhou)
- Two NVMe fixes. One fixing a regression in the nvme request
initialization in this merge window, causing nvme-fc to not work.
The other is a suspend/resume p2p resource issue (James, Keith)
- Fix sg discard merge, allowing us to merge in cases where we didn't
before (Jianchao Wang)
- Call rq_qos_exit() after the queue is frozen, preventing a hang
(Ming)
- Fix brd queue setup, fixing an oops if we fail setting up all
devices (Ming)"
* tag 'for-linus-20181102' of git://git.kernel.dk/linux-block:
nvme-pci: fix conflicting p2p resource adds
nvme-fc: fix request private initialization
blkcg: revert blkcg cleanups series
block: brd: associate with queue until adding disk
block: call rq_qos_exit() after queue is frozen
mtip32xx: clean an indentation issue, remove extraneous tabs
block: fix the DISCARD request merge
On a system that executes multiple cgrouped jobs and independent
workloads, we don't just care about the health of the overall system, but
also that of individual jobs, so that we can ensure individual job health,
fairness between jobs, or prioritize some jobs over others.
This patch implements pressure stall tracking for cgroups. In kernels
with CONFIG_PSI=y, cgroup2 groups will have cpu.pressure, memory.pressure,
and io.pressure files that track aggregate pressure stall times for only
the tasks inside the cgroup.
Link: http://lkml.kernel.org/r/20180828172258.3185-10-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup updates from Tejun Heo:
"All trivial changes - simplification, typo fix and adding
cond_resched() in a netclassid update loop"
* 'for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup, netclassid: add a preemption point to write_classid
rdmacg: fix a typo in rdmacg documentation
cgroup: Simplify cgroup_ancestor
The previous patch in this series removed carrying around a pointer to
the css in blkg. However, the blkg association logic still relied on
taking a reference on the css to ensure we wouldn't fail in getting a
reference for the blkg.
Here the implicit dependency on the css is removed. The association
continues to rely on the tryget logic walking up the blkg tree. This
streamlines the three ways that association can happen: normal, swap,
and writeback.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dennis Zhou <dennisszhou@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
== Problem description ==
It's useful to be able to identify cgroup associated with skb in TC so
that a policy can be applied to this skb, and existing bpf_skb_cgroup_id
helper can help with this.
Though in real life cgroup hierarchy and hierarchy to apply a policy to
don't map 1:1.
It's often the case that there is a container and corresponding cgroup,
but there are many more sub-cgroups inside container, e.g. because it's
delegated to containerized application to control resources for its
subsystems, or to separate application inside container from infra that
belongs to containerization system (e.g. sshd).
At the same time it may be useful to apply a policy to container as a
whole.
If multiple containers like this are run on a host (what is often the
case) and many of them have sub-cgroups, it may not be possible to apply
per-container policy in TC with existing helpers such as
bpf_skb_under_cgroup or bpf_skb_cgroup_id:
* bpf_skb_cgroup_id will return id of immediate cgroup associated with
skb, i.e. if it's a sub-cgroup inside container, it can't be used to
identify container's cgroup;
* bpf_skb_under_cgroup can work only with one cgroup and doesn't scale,
i.e. if there are N containers on a host and a policy has to be
applied to M of them (0 <= M <= N), it'd require M calls to
bpf_skb_under_cgroup, and, if M changes, it'd require to rebuild &
load new BPF program.
== Solution ==
The patch introduces new helper bpf_skb_ancestor_cgroup_id that can be
used to get id of cgroup v2 that is an ancestor of cgroup associated
with skb at specified level of cgroup hierarchy.
That way admin can place all containers on one level of cgroup hierarchy
(what is a good practice in general and already used in many
configurations) and identify specific cgroup on this level no matter
what sub-cgroup skb is associated with.
E.g. if there is a cgroup hierarchy:
root/
root/container1/
root/container1/app11/
root/container1/app11/sub-app-a/
root/container1/app12/
root/container2/
root/container2/app21/
root/container2/app22/
root/container2/app22/sub-app-b/
, then having skb associated with root/container1/app11/sub-app-a/ it's
possible to get ancestor at level 1, what is container1 and apply policy
for this container, or apply another policy if it's container2.
Policies can be kept e.g. in a hash map where key is a container cgroup
id and value is an action.
Levels where container cgroups are created are usually known in advance
whether cgroup hierarchy inside container may be hard to predict
especially in case when its creation is delegated to containerized
application.
== Implementation details ==
The helper gets ancestor by walking parents up to specified level.
Another option would be to get different kind of "id" from
cgroup->ancestor_ids[level] and use it with idr_find() to get struct
cgroup for ancestor. But that would require radix lookup what doesn't
seem to be better (at least it's not obviously better).
Format of return value of the new helper is same as that of
bpf_skb_cgroup_id.
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently, rstat flush path is protected with a mutex which is fine as
all the existing users are from interface file show path. However,
rstat is being generalized for use by controllers and flushing from
atomic contexts will be necessary.
This patch replaces cgroup_rstat_mutex with a spinlock and adds a
irq-safe flush function - cgroup_rstat_flush_irqsafe(). Explicit
yield handling is added to the flush path so that other flush
functions can yield to other threads and flushers.
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_rstat is being generalized so that controllers can use it too.
This patch factors out and exposes the following interface functions.
* cgroup_rstat_updated(): Renamed from cgroup_rstat_cpu_updated() for
consistency.
* cgroup_rstat_flush_hold/release(): Factored out from base stat
implementation.
* cgroup_rstat_flush(): Verbatim expose.
While at it, drop assert on cgroup_rstat_mutex in
cgroup_base_stat_flush() as it crosses layers and make a minor comment
update.
v2: Added EXPORT_SYMBOL_GPL(cgroup_rstat_updated) to fix a build bug.
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull cgroup updates from Tejun Heo:
"Cgroup2 cpu controller support is finally merged.
- Basic cpu statistics support to allow monitoring by default without
the CPU controller enabled.
- cgroup2 cpu controller support.
- /sys/kernel/cgroup files to help dealing with new / optional
features"
* 'for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: export list of cgroups v2 features using sysfs
cgroup: export list of delegatable control files using sysfs
cgroup: mark @cgrp __maybe_unused in cpu_stat_show()
MAINTAINERS: relocate cpuset.c
cgroup, sched: Move basic cpu stats from cgroup.stat to cpu.stat
sched: Implement interface for cgroup unified hierarchy
sched: Misc preps for cgroup unified hierarchy interface
sched/cputime: Add dummy cputime_adjust() implementation for CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
cgroup: statically initialize init_css_set->dfl_cgrp
cgroup: Implement cgroup2 basic CPU usage accounting
cpuacct: Introduce cgroup_account_cputime[_field]()
sched/cputime: Expose cputime_adjust()
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The basic cpu stat is currently shown with "cpu." prefix in
cgroup.stat, and the same information is duplicated in cpu.stat when
cpu controller is enabled. This is ugly and not very scalable as we
want to expand the coverage of stat information which is always
available.
This patch makes cgroup core always create "cpu.stat" file and show
the basic cpu stat there and calls the cpu controller to show the
extra stats when enabled. This ensures that the same information
isn't presented in multiple places and makes future expansion of basic
stats easier.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
In cgroup1, while cpuacct isn't actually controlling any resources, it
is a separate controller due to combination of two factors -
1. enabling cpu controller has significant side effects, and 2. we
have to pick one of the hierarchies to account CPU usages on. cpuacct
controller is effectively used to designate a hierarchy to track CPU
usages on.
cgroup2's unified hierarchy removes the second reason and we can
account basic CPU usages by default. While we can use cpuacct for
this purpose, both its interface and implementation leave a lot to be
desired - it collects and exposes two sources of truth which don't
agree with each other and some of the exposed statistics don't make
much sense. Also, it propagates all the way up the hierarchy on each
accounting event which is unnecessary.
This patch adds basic resource accounting mechanism to cgroup2's
unified hierarchy and accounts CPU usages using it.
* All accountings are done per-cpu and don't propagate immediately.
It just bumps the per-cgroup per-cpu counters and links to the
parent's updated list if not already on it.
* On a read, the per-cpu counters are collected into the global ones
and then propagated upwards. Only the per-cpu counters which have
changed since the last read are propagated.
* CPU usage stats are collected and shown in "cgroup.stat" with "cpu."
prefix. Total usage is collected from scheduling events. User/sys
breakdown is sourced from tick sampling and adjusted to the usage
using cputime_adjust().
This keeps the accounting side hot path O(1) and per-cpu and the read
side O(nr_updated_since_last_read).
v2: Minor changes and documentation updates as suggested by Waiman and
Roman.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Roman Gushchin <guro@fb.com>
Introduce cgroup_account_cputime[_field]() which wrap cpuacct_charge()
and cgroup_account_field(). This doesn't introduce any functional
changes and will be used to add cgroup basic resource accounting.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
Misc trivial changes to prepare for future changes. No functional
difference.
* Expose cgroup_get(), cgroup_tryget() and cgroup_parent().
* Implement task_dfl_cgroup() which dereferences css_set->dfl_cgrp.
* Rename cgroup_stats_show() to cgroup_stat_show() for consistency
with the file name.
Signed-off-by: Tejun Heo <tj@kernel.org>
By default we output cgroup id in blktrace. This adds an option to
display cgroup path. Since get cgroup path is a relativly heavy
operation, we don't enable it by default.
with the option enabled, blktrace will output something like this:
dd-1353 [007] d..2 293.015252: 8,0 /test/level D R 24 + 8 [dd]
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add an API to export cgroup fhandle info. We don't export a full 'struct
file_handle', there are unrequired info. Sepcifically, cgroup is always
a directory, so we don't need a 'FILEID_INO32_GEN_PARENT' type fhandle,
we only need export the inode number and generation number just like
what generic_fh_to_dentry does. And we can avoid the overhead of getting
an inode too, since kernfs_node_id (ino and generation) has all the info
required.
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
inode number and generation can identify a kernfs node. We are going to
export the identification by exportfs operations, so put ino and
generation into a separate structure. It's convenient when later patches
use the identification.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
cgroup v2 is in the process of growing thread granularity support.
Once thread mode is enabled, the root cgroup of the subtree serves as
the dom_cgrp to which the processes of the subtree conceptually belong
and domain-level resource consumptions not tied to any specific task
are charged. In the subtree, threads won't be subject to process
granularity or no-internal-task constraint and can be distributed
arbitrarily across the subtree.
This patch implements a new task iterator flag CSS_TASK_ITER_THREADED,
which, when used on a dom_cgrp, makes the iteration include the tasks
on all the associated threaded css_sets. "cgroup.procs" read path is
updated to use it so that reading the file on a proc_cgrp lists all
processes. This will also be used by controller implementations which
need to walk processes or tasks at the resource domain level.
Task iteration is implemented nested in css_set iteration. If
CSS_TASK_ITER_THREADED is specified, after walking tasks of each
!threaded css_set, all the associated threaded css_sets are visited
before moving onto the next !threaded css_set.
v2: ->cur_pcset renamed to ->cur_dcset. Updated for the new
enable-threaded-per-cgroup behavior.
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup v2 is in the process of growing thread granularity support. A
threaded subtree is composed of a thread root and threaded cgroups
which are proper members of the subtree.
The root cgroup of the subtree serves as the domain cgroup to which
the processes (as opposed to threads / tasks) of the subtree
conceptually belong and domain-level resource consumptions not tied to
any specific task are charged. Inside the subtree, threads won't be
subject to process granularity or no-internal-task constraint and can
be distributed arbitrarily across the subtree.
This patch introduces cgroup->dom_cgrp along with threaded css_set
handling.
* cgroup->dom_cgrp points to self for normal and thread roots. For
proper thread subtree members, points to the dom_cgrp (the thread
root).
* css_set->dom_cset points to self if for normal and thread roots. If
threaded, points to the css_set which belongs to the cgrp->dom_cgrp.
The dom_cgrp serves as the resource domain and keeps the matching
csses available. The dom_cset holds those csses and makes them
easily accessible.
* All threaded csets are linked on their dom_csets to enable iteration
of all threaded tasks.
* cgroup->nr_threaded_children keeps track of the number of threaded
children.
This patch adds the above but doesn't actually use them yet. The
following patches will build on top.
v4: ->nr_threaded_children added.
v3: ->proc_cgrp/cset renamed to ->dom_cgrp/cset. Updated for the new
enable-threaded-per-cgroup behavior.
v2: Added cgroup_is_threaded() helper.
Signed-off-by: Tejun Heo <tj@kernel.org>
css_task_iter currently always walks all tasks. With the scheduled
cgroup v2 thread support, the iterator would need to handle multiple
types of iteration. As a preparation, add @flags to
css_task_iter_start() and implement CSS_TASK_ITER_PROCS. If the flag
is not specified, it walks all tasks as before. When asserted, the
iterator only walks the group leaders.
For now, the only user of the flag is cgroup v2 "cgroup.procs" file
which no longer needs to skip non-leader tasks in cgroup_procs_next().
Note that cgroup v1 "cgroup.procs" can't use the group leader walk as
v1 "cgroup.procs" doesn't mean "list all thread group leaders in the
cgroup" but "list all thread group id's with any threads in the
cgroup".
While at it, update cgroup_procs_show() to use task_pid_vnr() instead
of task_tgid_vnr(). As the iteration guarantees that the function
only sees group leaders, this doesn't change the output and will allow
sharing the function for thread iteration.
Signed-off-by: Tejun Heo <tj@kernel.org>
cgrp->populated_cnt counts both local (the cgroup's populated
css_sets) and subtree proper (populated children) so that it's only
zero when the whole subtree, including self, is empty.
This patch splits the counter into two so that local and children
populated states are tracked separately. It allows finer-grained
tests on the state of the hierarchy which will be used to replace
css_set walking local populated test.
Signed-off-by: Tejun Heo <tj@kernel.org>
In most cases, a cgroup controller don't care about the liftimes of
cgroups. For the controller, a css becomes online when ->css_online()
is called on it and offline when ->css_offline() is called.
However, cpuset is special in that the user interface it exposes cares
whether certain cgroups exist or not. Combined with the RCU delay
between cgroup removal and css offlining, this can lead to user
visible behavior oddities where operations which should succeed after
cgroup removals fail for some time period. The effects of cgroup
removals are delayed when seen from userland.
This patch adds css_is_dying() which tests whether offline is pending
and updates is_cpuset_online() so that the function returns false also
while offline is pending. This gets rid of the userland visible
delays.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Link: http://lkml.kernel.org/r/327ca1f5-7957-fbb9-9e5f-9ba149d40ba2@oracle.com
Cc: stable@vger.kernel.org
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull cgroup updates from Tejun Heo:
"Nothing major. Two notable fixes are Li's second stab at fixing the
long-standing race condition in the mount path and suppression of
spurious warning from cgroup_get(). All other changes are trivial"
* 'for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: mark cgroup_get() with __maybe_unused
cgroup: avoid attaching a cgroup root to two different superblocks, take 2
cgroup: fix spurious warnings on cgroup_is_dead() from cgroup_sk_alloc()
cgroup: move cgroup_subsys_state parent field for cache locality
cpuset: Remove cpuset_update_active_cpus()'s parameter.
cgroup: switch to BUG_ON()
cgroup: drop duplicate header nsproxy.h
kernel: convert css_set.refcount from atomic_t to refcount_t
kernel: convert cgroup_namespace.count from atomic_t to refcount_t
Creation of a kthread goes through a couple interlocked stages between
the kthread itself and its creator. Once the new kthread starts
running, it initializes itself and wakes up the creator. The creator
then can further configure the kthread and then let it start doing its
job by waking it up.
In this configuration-by-creator stage, the creator is the only one
that can wake it up but the kthread is visible to userland. When
altering the kthread's attributes from userland is allowed, this is
fine; however, for cases where CPU affinity is critical,
kthread_bind() is used to first disable affinity changes from userland
and then set the affinity. This also prevents the kthread from being
migrated into non-root cgroups as that can affect the CPU affinity and
many other things.
Unfortunately, the cgroup side of protection is racy. While the
PF_NO_SETAFFINITY flag prevents further migrations, userland can win
the race before the creator sets the flag with kthread_bind() and put
the kthread in a non-root cgroup, which can lead to all sorts of
problems including incorrect CPU affinity and starvation.
This bug got triggered by userland which periodically tries to migrate
all processes in the root cpuset cgroup to a non-root one. Per-cpu
workqueue workers got caught while being created and ended up with
incorrected CPU affinity breaking concurrency management and sometimes
stalling workqueue execution.
This patch adds task->no_cgroup_migration which disallows the task to
be migrated by userland. kthreadd starts with the flag set making
every child kthread start in the root cgroup with migration
disallowed. The flag is cleared after the kthread finishes
initialization by which time PF_NO_SETAFFINITY is set if the kthread
should stay in the root cgroup.
It'd be better to wait for the initialization instead of failing but I
couldn't think of a way of implementing that without adding either a
new PF flag, or sleeping and retrying from waiting side. Even if
userland depends on changing cgroup membership of a kthread, it either
has to be synchronized with kthread_create() or periodically repeat,
so it's unlikely that this would break anything.
v2: Switch to a simpler implementation using a new task_struct bit
field suggested by Oleg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reported-and-debugged-by: Chris Mason <clm@fb.com>
Cc: stable@vger.kernel.org # v4.3+ (we can't close the race on < v4.3)
Signed-off-by: Tejun Heo <tj@kernel.org>
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull cgroup updates from Tejun Heo:
- tracepoints for basic cgroup management operations added
- kernfs and cgroup path formatting functions updated to behave in the
style of strlcpy()
- non-critical bug fixes
* 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
blkcg: Unlock blkcg_pol_mutex only once when cpd == NULL
cgroup: fix error handling regressions in proc_cgroup_show() and cgroup_release_agent()
cpuset: fix error handling regression in proc_cpuset_show()
cgroup: add tracepoints for basic operations
cgroup: make cgroup_path() and friends behave in the style of strlcpy()
kernfs: remove kernfs_path_len()
kernfs: make kernfs_path*() behave in the style of strlcpy()
kernfs: add dummy implementation of kernfs_path_from_node()
Pull namespace updates from Eric Biederman:
"This set of changes is a number of smaller things that have been
overlooked in other development cycles focused on more fundamental
change. The devpts changes are small things that were a distraction
until we managed to kill off DEVPTS_MULTPLE_INSTANCES. There is an
trivial regression fix to autofs for the unprivileged mount changes
that went in last cycle. A pair of ioctls has been added by Andrey
Vagin making it is possible to discover the relationships between
namespaces when referring to them through file descriptors.
The big user visible change is starting to add simple resource limits
to catch programs that misbehave. With namespaces in general and user
namespaces in particular allowing users to use more kinds of
resources, it has become important to have something to limit errant
programs. Because the purpose of these limits is to catch errant
programs the code needs to be inexpensive to use as it always on, and
the default limits need to be high enough that well behaved programs
on well behaved systems don't encounter them.
To this end, after some review I have implemented per user per user
namespace limits, and use them to limit the number of namespaces. The
limits being per user mean that one user can not exhause the limits of
another user. The limits being per user namespace allow contexts where
the limit is 0 and security conscious folks can remove from their
threat anlysis the code used to manage namespaces (as they have
historically done as it root only). At the same time the limits being
per user namespace allow other parts of the system to use namespaces.
Namespaces are increasingly being used in application sand boxing
scenarios so an all or nothing disable for the entire system for the
security conscious folks makes increasing use of these sandboxes
impossible.
There is also added a limit on the maximum number of mounts present in
a single mount namespace. It is nontrivial to guess what a reasonable
system wide limit on the number of mount structure in the kernel would
be, especially as it various based on how a system is using
containers. A limit on the number of mounts in a mount namespace
however is much easier to understand and set. In most cases in
practice only about 1000 mounts are used. Given that some autofs
scenarious have the potential to be 30,000 to 50,000 mounts I have set
the default limit for the number of mounts at 100,000 which is well
above every known set of users but low enough that the mount hash
tables don't degrade unreaonsably.
These limits are a start. I expect this estabilishes a pattern that
other limits for resources that namespaces use will follow. There has
been interest in making inotify event limits per user per user
namespace as well as interest expressed in making details about what
is going on in the kernel more visible"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (28 commits)
autofs: Fix automounts by using current_real_cred()->uid
mnt: Add a per mount namespace limit on the number of mounts
netns: move {inc,dec}_net_namespaces into #ifdef
nsfs: Simplify __ns_get_path
tools/testing: add a test to check nsfs ioctl-s
nsfs: add ioctl to get a parent namespace
nsfs: add ioctl to get an owning user namespace for ns file descriptor
kernel: add a helper to get an owning user namespace for a namespace
devpts: Change the owner of /dev/pts/ptmx to the mounter of /dev/pts
devpts: Remove sync_filesystems
devpts: Make devpts_kill_sb safe if fsi is NULL
devpts: Simplify devpts_mount by using mount_nodev
devpts: Move the creation of /dev/pts/ptmx into fill_super
devpts: Move parse_mount_options into fill_super
userns: When the per user per user namespace limit is reached return ENOSPC
userns; Document per user per user namespace limits.
mntns: Add a limit on the number of mount namespaces.
netns: Add a limit on the number of net namespaces
cgroupns: Add a limit on the number of cgroup namespaces
ipcns: Add a limit on the number of ipc namespaces
...
This commit adds an inline function to cgroup.h to check whether a given
task is under a given cgroup hierarchy. This is to avoid having to put
ifdefs in .c files to gate access to cgroups. When cgroups are disabled
this always returns true.
Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
cgroup_path() and friends used to format the path from the end and
thus the resulting path usually didn't start at the start of the
passed in buffer. Also, when the buffer was too small, the partial
result was truncated from the head rather than tail and there was no
way to tell how long the full path would be. These make the functions
less robust and more awkward to use.
With recent updates to kernfs_path(), cgroup_path() and friends can be
made to behave in strlcpy() style.
* cgroup_path(), cgroup_path_ns[_locked]() and task_cgroup_path() now
always return the length of the full path. If buffer is too small,
it contains nul terminated truncated output.
* All users updated accordingly.
v2: cgroup_path() usage in kernel/sched/debug.c converted.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Jianping Liu