The '->write_super' superblock method is gone, and this patch removes all the
references to 'write_super' from various jbd and jbd2.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Use kmem_cache_zalloc wrapper instead of flag __GFP_ZERO.
Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify checksums of each data block being stored in the journal.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify the checksum of commit blocks. In checksum v2,
deprecate most of the checksum v1 commit block checksum fields, since
each block has its own checksum.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify a checksum of each descriptor block.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate and verify a checksum covering the journal superblock.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Obtain a reference to the crc32c driver if needed for the v2 checksum.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add in the necessary code so that journal clients can enable the new
journal checksumming features.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Define flags and allocate space in on-disk journal structures to support
checksumming of journal metadata.
Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
flush request is issued in transaction commit code path, so looks using
GFP_KERNEL to allocate memory for flush request bio falls into the classic
deadlock issue. I saw btrfs and dm get it right, but ext4, xfs and md are
using GFP.
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: stable@vger.kernel.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=G9mT
-----END PGP SIGNATURE-----
Merge tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system
Pull "Disintegrate and delete asm/system.h" from David Howells:
"Here are a bunch of patches to disintegrate asm/system.h into a set of
separate bits to relieve the problem of circular inclusion
dependencies.
I've built all the working defconfigs from all the arches that I can
and made sure that they don't break.
The reason for these patches is that I recently encountered a circular
dependency problem that came about when I produced some patches to
optimise get_order() by rewriting it to use ilog2().
This uses bitops - and on the SH arch asm/bitops.h drags in
asm-generic/get_order.h by a circuituous route involving asm/system.h.
The main difficulty seems to be asm/system.h. It holds a number of
low level bits with no/few dependencies that are commonly used (eg.
memory barriers) and a number of bits with more dependencies that
aren't used in many places (eg. switch_to()).
These patches break asm/system.h up into the following core pieces:
(1) asm/barrier.h
Move memory barriers here. This already done for MIPS and Alpha.
(2) asm/switch_to.h
Move switch_to() and related stuff here.
(3) asm/exec.h
Move arch_align_stack() here. Other process execution related bits
could perhaps go here from asm/processor.h.
(4) asm/cmpxchg.h
Move xchg() and cmpxchg() here as they're full word atomic ops and
frequently used by atomic_xchg() and atomic_cmpxchg().
(5) asm/bug.h
Move die() and related bits.
(6) asm/auxvec.h
Move AT_VECTOR_SIZE_ARCH here.
Other arch headers are created as needed on a per-arch basis."
Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that. We'll find out anything that got broken and fix it..
* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
Delete all instances of asm/system.h
Remove all #inclusions of asm/system.h
Add #includes needed to permit the removal of asm/system.h
Move all declarations of free_initmem() to linux/mm.h
Disintegrate asm/system.h for OpenRISC
Split arch_align_stack() out from asm-generic/system.h
Split the switch_to() wrapper out of asm-generic/system.h
Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
Create asm-generic/barrier.h
Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
Disintegrate asm/system.h for Xtensa
Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
Disintegrate asm/system.h for Tile
Disintegrate asm/system.h for Sparc
Disintegrate asm/system.h for SH
Disintegrate asm/system.h for Score
Disintegrate asm/system.h for S390
Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PA-RISC
Disintegrate asm/system.h for MN10300
...
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it. Performed with the following command:
perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`
Signed-off-by: David Howells <dhowells@redhat.com>
The changes to export dirty_writeback_interval are from Artem's s_dirt
cleanup patch series. The same is true of the change to remove the
s_dirt helper functions which never got used by anyone in-tree. I've
run these changes by Al Viro, and am carrying them so that Artem can
more easily fix up the rest of the file systems during the next merge
window. (Originally we had hopped to remove the use of s_dirt from
ext4 during this merge window, but his patches had some bugs, so I
ultimately ended dropping them from the ext4 tree.)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=+9zk
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates for 3.4 from Ted Ts'o:
"Ext4 commits for 3.3 merge window; mostly cleanups and bug fixes
The changes to export dirty_writeback_interval are from Artem's s_dirt
cleanup patch series. The same is true of the change to remove the
s_dirt helper functions which never got used by anyone in-tree. I've
run these changes by Al Viro, and am carrying them so that Artem can
more easily fix up the rest of the file systems during the next merge
window. (Originally we had hopped to remove the use of s_dirt from
ext4 during this merge window, but his patches had some bugs, so I
ultimately ended dropping them from the ext4 tree.)"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (66 commits)
vfs: remove unused superblock helpers
mm: export dirty_writeback_interval
ext4: remove useless s_dirt assignment
ext4: write superblock only once on unmount
ext4: do not mark superblock as dirty unnecessarily
ext4: correct ext4_punch_hole return codes
ext4: remove restrictive checks for EOFBLOCKS_FL
ext4: always set then trimmed blocks count into len
ext4: fix trimmed block count accunting
ext4: fix start and len arguments handling in ext4_trim_fs()
ext4: update s_free_{inodes,blocks}_count during online resize
ext4: change some printk() calls to use ext4_msg() instead
ext4: avoid output message interleaving in ext4_error_<foo>()
ext4: remove trailing newlines from ext4_msg() and ext4_error() messages
ext4: add no_printk argument validation, fix fallout
ext4: remove redundant "EXT4-fs: " from uses of ext4_msg
ext4: give more helpful error message in ext4_ext_rm_leaf()
ext4: remove unused code from ext4_ext_map_blocks()
ext4: rewrite punch hole to use ext4_ext_remove_space()
jbd2: cleanup journal tail after transaction commit
...
Assorted extensions and fixes including:
* Introduction of early/late suspend/hibernation device callbacks.
* Generic PM domains extensions and fixes.
* devfreq updates from Axel Lin and MyungJoo Ham.
* Device PM QoS updates.
* Fixes of concurrency problems with wakeup sources.
* System suspend and hibernation fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.18 (GNU/Linux)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=IGhc
-----END PGP SIGNATURE-----
Merge tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates for 3.4 from Rafael Wysocki:
"Assorted extensions and fixes including:
* Introduction of early/late suspend/hibernation device callbacks.
* Generic PM domains extensions and fixes.
* devfreq updates from Axel Lin and MyungJoo Ham.
* Device PM QoS updates.
* Fixes of concurrency problems with wakeup sources.
* System suspend and hibernation fixes."
* tag 'pm-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (43 commits)
PM / Domains: Check domain status during hibernation restore of devices
PM / devfreq: add relation of recommended frequency.
PM / shmobile: Make MTU2 driver use pm_genpd_dev_always_on()
PM / shmobile: Make CMT driver use pm_genpd_dev_always_on()
PM / shmobile: Make TMU driver use pm_genpd_dev_always_on()
PM / Domains: Introduce "always on" device flag
PM / Domains: Fix hibernation restore of devices, v2
PM / Domains: Fix handling of wakeup devices during system resume
sh_mmcif / PM: Use PM QoS latency constraint
tmio_mmc / PM: Use PM QoS latency constraint
PM / QoS: Make it possible to expose PM QoS latency constraints
PM / Sleep: JBD and JBD2 missing set_freezable()
PM / Domains: Fix include for PM_GENERIC_DOMAINS=n case
PM / Freezer: Remove references to TIF_FREEZE in comments
PM / Sleep: Add more wakeup source initialization routines
PM / Hibernate: Enable usermodehelpers in hibernate() error path
PM / Sleep: Make __pm_stay_awake() delete wakeup source timers
PM / Sleep: Fix race conditions related to wakeup source timer function
PM / Sleep: Fix possible infinite loop during wakeup source destruction
PM / Hibernate: print physical addresses consistently with other parts of kernel
...
Normally, we have to issue a cache flush before we can update journal tail in
journal superblock, effectively wiping out old transactions from the journal.
So use the fact that during transaction commit we issue cache flush anyway and
opportunistically push journal tail as far as we can. Since update of journal
superblock is still costly (we have to use WRITE_FUA), we update log tail only
if we can free significant amount of space.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
All accesses to checkpointing entries in journal_head are protected
by j_list_lock. Thus __jbd2_journal_remove_checkpoint() doesn't really
need bh_state lock.
Also the only part of journal head that the rest of checkpointing code
needs to check is jh->b_transaction which is safe to read under
j_list_lock.
So we can safely remove bh_state lock from all of checkpointing code which
makes it considerably prettier.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The check b_jlist == BJ_None in __journal_try_to_free_buffer() is
always true (__jbd2_journal_temp_unlink_buffer() also checks this in
an assertion) so just remove it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
BH_JWrite bit should be set when buffer is written to the journal. So
checkpointing shouldn't set this bit when writing out buffer. This didn't
cause any observable bug since BH_JWrite bit is used only for debugging
purposes but it's good to have this consistent.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When we reach jbd2_cleanup_journal_tail(), there is no guarantee that
checkpointed buffers are on a stable storage - especially if buffers were
written out by jbd2_log_do_checkpoint(), they are likely to be only in disk's
caches. Thus when we update journal superblock effectively removing old
transaction from journal, this write of superblock can get to stable storage
before those checkpointed buffers which can result in filesystem corruption
after a crash. Thus we must unconditionally issue a cache flush before we
update journal superblock in these cases.
A similar problem can also occur if journal superblock is written only in
disk's caches, other transaction starts reusing space of the transaction
cleaned from the log and power failure happens. Subsequent journal replay would
still try to replay the old transaction but some of it's blocks may be already
overwritten by the new transaction. For this reason we must use WRITE_FUA when
updating log tail and we must first write new log tail to disk and update
in-memory information only after that.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With the latest and greatest changes to the freezer, I started seeing
panics that were caused by jbd2 running post-process freezing and
hitting the canary BUG_ON for non-TuxOnIce I/O submission. I've traced
this back to a lack of set_freezable calls in both jbd and jbd2. Since
they're clearly meant to be frozen (there are tests for freezing()), I
submit the following patch to add the missing calls.
Signed-off-by: Nigel Cunningham <nigel@tuxonice.net>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
There are some log tail updates that are not protected by j_checkpoint_mutex.
Some of these are harmless because they happen during startup or shutdown but
updates in jbd2_journal_commit_transaction() and jbd2_journal_flush() can
really race with other log tail updates (e.g. someone doing
jbd2_journal_flush() with someone running jbd2_cleanup_journal_tail()). So
protect all log tail updates with j_checkpoint_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are three case of updating journal superblock. In the first case, we want
to mark journal as empty (setting s_sequence to 0), in the second case we want
to update log tail, in the third case we want to update s_errno. Split these
cases into separate functions. It makes the code slightly more straightforward
and later patches will make the distinction even more important.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The V2 journal format was introduced around ten years ago,
for ext3. It seems highly unlikely that anyone will need this
migration option for ext4.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use the KMEM_CACHE helper macro instead of kmem_cache_create().
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch renames functions initializing the slab caches for the
journal head and handle structures to so they are consistent with the
names of the corresponding functions which destroys those slab caches.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There is normally only a handful of these active at any one time, but
putting them in a separate slab cache makes debugging memory
corruption problems easier. Manish Katiyar also wanted this make it
easier to test memory failure scenarios in the jbd2 layer.
Cc: Manish Katiyar <mkatiyar@gmail.com>
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
journal_unmap_buffer()'s zap_buffer: code clears a lot of buffer head
state ala discard_buffer(), but does not touch _Delay or _Unwritten as
discard_buffer() does.
This can be problematic in some areas of the ext4 code which assume
that if they have found a buffer marked unwritten or delay, then it's
a live one. Perhaps those spots should check whether it is mapped
as well, but if jbd2 is going to tear down a buffer, let's really
tear it down completely.
Without this I get some fsx failures on sub-page-block filesystems
up until v3.2, at which point 4e96b2dbbf
and 189e868fa8 make the failures go
away, because buried within that large change is some more flag
clearing. I still think it's worth doing in jbd2, since
->invalidatepage leads here directly, and it's the right place
to clear away these flags.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org
This patch adds trace_jbd2_drop_transaction and
trace_jbd2_update_superblock_end because there are similar tracepoints
in jbd and they are needed in jbd2 as well.
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (53 commits)
Kconfig: acpi: Fix typo in comment.
misc latin1 to utf8 conversions
devres: Fix a typo in devm_kfree comment
btrfs: free-space-cache.c: remove extra semicolon.
fat: Spelling s/obsolate/obsolete/g
SCSI, pmcraid: Fix spelling error in a pmcraid_err() call
tools/power turbostat: update fields in manpage
mac80211: drop spelling fix
types.h: fix comment spelling for 'architectures'
typo fixes: aera -> area, exntension -> extension
devices.txt: Fix typo of 'VMware'.
sis900: Fix enum typo 'sis900_rx_bufer_status'
decompress_bunzip2: remove invalid vi modeline
treewide: Fix comment and string typo 'bufer'
hyper-v: Update MAINTAINERS
treewide: Fix typos in various parts of the kernel, and fix some comments.
clockevents: drop unknown Kconfig symbol GENERIC_CLOCKEVENTS_MIGR
gpio: Kconfig: drop unknown symbol 'CS5535_GPIO'
leds: Kconfig: Fix typo 'D2NET_V2'
sound: Kconfig: drop unknown symbol ARCH_CLPS7500
...
Fix up trivial conflicts in arch/powerpc/platforms/40x/Kconfig (some new
kconfig additions, close to removed commented-out old ones)
Toshiyuki Okajima found out that when running
for ((i=0; i < 100000; i++)); do
if ((i%2 == 0)); then
chattr +j /mnt/file
else
chattr -j /mnt/file
fi
echo "0" >> /mnt/file
done
process sometimes hangs indefinitely in jbd2_journal_lock_updates().
Toshiyuki identified that the following race happens:
jbd2_journal_lock_updates() |jbd2_journal_stop()
---------------------------------------+---------------------------------------
write_lock(&journal->j_state_lock) | .
++journal->j_barrier_count | .
spin_lock(&tran->t_handle_lock) | .
atomic_read(&tran->t_updates) //not 0 |
| atomic_dec_and_test(&tran->t_updates)
| // t_updates = 0
| wake_up(&journal->j_wait_updates)
prepare_to_wait() | // no process is woken up.
spin_unlock(&tran->t_handle_lock) |
write_unlock(&journal->j_state_lock) |
schedule() // never return |
We fix the problem by first calling prepare_to_wait() and only after that
checking t_updates in jbd2_journal_lock_updates().
Reported-and-analyzed-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently, we clear revoked flag only when a block is reused. However,
this can tigger a false journal error. Consider a situation when a block
is used as a meta block and is deleted(revoked) in ordered mode, then the
block is allocated as a data block to a file. At this moment, user changes
the file's journal mode from ordered to journaled and truncates the file.
The block will be considered re-revoked by journal because it has revoked
flag still pending from the last transaction and an assertion triggers.
We fix the problem by keeping the revoked status more uptodate - we clear
revoked flag when switching revoke tables to reflect there is no revoked
buffers in current transaction any more.
Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There is no reason to export two functions for entering the
refrigerator. Calling refrigerator() instead of try_to_freeze()
doesn't save anything noticeable or removes any race condition.
* Rename refrigerator() to __refrigerator() and make it return bool
indicating whether it scheduled out for freezing.
* Update try_to_freeze() to return bool and relay the return value of
__refrigerator() if freezing().
* Convert all refrigerator() users to try_to_freeze().
* Update documentation accordingly.
* While at it, add might_sleep() to try_to_freeze().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Samuel Ortiz <samuel@sortiz.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Cc: Christoph Hellwig <hch@infradead.org>
Some jbd2 code prints out kernel messages with "JBD2: " prefix, at the
same time other jbd2 code prints with "JBD: " prefix. Unify the prefix
to "JBD2: ".
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
I hit a J_ASSERT(blocknr != 0) failure in cleanup_journal_tail() when
mounting a fsfuzzed ext3 image. It turns out that the corrupted ext3
image has s_first = 0 in journal superblock, and the 0 is passed to
journal->j_head in journal_reset(), then to blocknr in
cleanup_journal_tail(), in the end the J_ASSERT failed.
So validate s_first after reading journal superblock from disk in
journal_get_superblock() to ensure s_first is valid.
The following script could reproduce it:
fstype=ext3
blocksize=1024
img=$fstype.img
offset=0
found=0
magic="c0 3b 39 98"
dd if=/dev/zero of=$img bs=1M count=8
mkfs -t $fstype -b $blocksize -F $img
filesize=`stat -c %s $img`
while [ $offset -lt $filesize ]
do
if od -j $offset -N 4 -t x1 $img | grep -i "$magic";then
echo "Found journal: $offset"
found=1
break
fi
offset=`echo "$offset+$blocksize" | bc`
done
if [ $found -ne 1 ];then
echo "Magic \"$magic\" not found"
exit 1
fi
dd if=/dev/zero of=$img seek=$(($offset+23)) conv=notrunc bs=1 count=1
mkdir -p ./mnt
mount -o loop $img ./mnt
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Fix build error when CONFIG_BUG is not enabled:
fs/jbd2/transaction.c:1175:3: error: implicit declaration of function '__WARN'
by changing __WARN() to WARN_ON(), as suggested by
Arnaud Lacombe <lacombar@gmail.com>.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Arnaud Lacombe <lacombar@gmail.com>
This silences some Sparse warnings:
fs/jbd2/transaction.c:135:69: warning: incorrect type in argument 2 (different base types)
fs/jbd2/transaction.c:135:69: expected restricted gfp_t [usertype] flags
fs/jbd2/transaction.c:135:69: got int [signed] gfp_mask
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add debugging information in case jbd2_journal_dirty_metadata() is
called with a buffer_head which didn't have
jbd2_journal_get_write_access() called on it, or if the journal_head
has the wrong transaction in it. In addition, return an error code.
This won't change anything for ocfs2, which will BUG_ON() the non-zero
exit code.
For ext4, the caller of this function is ext4_handle_dirty_metadata(),
and on seeing a non-zero return code, will call __ext4_journal_stop(),
which will print the function and line number of the (buggy) calling
function and abort the journal. This will allow us to recover instead
of bug halting, which is better from a robustness and reliability
point of view.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Using function calls in TP_printk causes perf heartburn, so print the
MAJOR/MINOR device numbers instead.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In journal checkpoint, we write the buffer and wait for its finish.
But in cfq, the async queue has a very low priority, and in our test,
if there are too many sync queues and every queue is filled up with
requests, the write request will be delayed for quite a long time and
all the tasks which are waiting for journal space will end with errors like:
INFO: task attr_set:3816 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
attr_set D ffff880028393480 0 3816 1 0x00000000
ffff8802073fbae8 0000000000000086 ffff8802140847c8 ffff8800283934e8
ffff8802073fb9d8 ffffffff8103e456 ffff8802140847b8 ffff8801ed728080
ffff8801db4bc080 ffff8801ed728450 ffff880028393480 0000000000000002
Call Trace:
[<ffffffff8103e456>] ? __dequeue_entity+0x33/0x38
[<ffffffff8103caad>] ? need_resched+0x23/0x2d
[<ffffffff814006a6>] ? thread_return+0xa2/0xbc
[<ffffffffa01f6224>] ? jbd2_journal_dirty_metadata+0x116/0x126 [jbd2]
[<ffffffffa01f6224>] ? jbd2_journal_dirty_metadata+0x116/0x126 [jbd2]
[<ffffffff81400d31>] __mutex_lock_common+0x14e/0x1a9
[<ffffffffa021dbfb>] ? brelse+0x13/0x15 [ext4]
[<ffffffff81400ddb>] __mutex_lock_slowpath+0x19/0x1b
[<ffffffff81400b2d>] mutex_lock+0x1b/0x32
[<ffffffffa01f927b>] __jbd2_journal_insert_checkpoint+0xe3/0x20c [jbd2]
[<ffffffffa01f547b>] start_this_handle+0x438/0x527 [jbd2]
[<ffffffff8106f491>] ? autoremove_wake_function+0x0/0x3e
[<ffffffffa01f560b>] jbd2_journal_start+0xa1/0xcc [jbd2]
[<ffffffffa02353be>] ext4_journal_start_sb+0x57/0x81 [ext4]
[<ffffffffa024a314>] ext4_xattr_set+0x6c/0xe3 [ext4]
[<ffffffffa024aaff>] ext4_xattr_user_set+0x42/0x4b [ext4]
[<ffffffff81145adb>] generic_setxattr+0x6b/0x76
[<ffffffff81146ac0>] __vfs_setxattr_noperm+0x47/0xc0
[<ffffffff81146bb8>] vfs_setxattr+0x7f/0x9a
[<ffffffff81146c88>] setxattr+0xb5/0xe8
[<ffffffff81137467>] ? do_filp_open+0x571/0xa6e
[<ffffffff81146d26>] sys_fsetxattr+0x6b/0x91
[<ffffffff81002d32>] system_call_fastpath+0x16/0x1b
So this patch tries to use WRITE_SYNC in __flush_batch so that the request will
be moved into sync queue and handled by cfq timely. We also use the new plug,
sot that all the WRITE_SYNC requests can be given as a whole when we unplug it.
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Jan Kara <jack@suse.cz>
Reported-by: Robin Dong <sanbai@taobao.com>
jbd2_journal_remove_journal_head() can oops when trying to access
journal_head returned by bh2jh(). This is caused for example by the
following race:
TASK1 TASK2
jbd2_journal_commit_transaction()
...
processing t_forget list
__jbd2_journal_refile_buffer(jh);
if (!jh->b_transaction) {
jbd_unlock_bh_state(bh);
jbd2_journal_try_to_free_buffers()
jbd2_journal_grab_journal_head(bh)
jbd_lock_bh_state(bh)
__journal_try_to_free_buffer()
jbd2_journal_put_journal_head(jh)
jbd2_journal_remove_journal_head(bh);
jbd2_journal_put_journal_head() in TASK2 sees that b_jcount == 0 and
buffer is not part of any transaction and thus frees journal_head
before TASK1 gets to doing so. Note that even buffer_head can be
released by try_to_free_buffers() after
jbd2_journal_put_journal_head() which adds even larger opportunity for
oops (but I didn't see this happen in reality).
Fix the problem by making transactions hold their own journal_head
reference (in b_jcount). That way we don't have to remove journal_head
explicitely via jbd2_journal_remove_journal_head() and instead just
remove journal_head when b_jcount drops to zero. The result of this is
that [__]jbd2_journal_refile_buffer(),
[__]jbd2_journal_unfile_buffer(), and
__jdb2_journal_remove_checkpoint() can free journal_head which needs
modification of a few callers. Also we have to be careful because once
journal_head is removed, buffer_head might be freed as well. So we
have to get our own buffer_head reference where it matters.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
credits isn't a parameter for jbd2_journal_get_write_access and
jbd2_journal_get_undo_access. So remove the corresponding comments.
Acked-by: Jan Kara <jack@suse.cz>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (61 commits)
jbd2: Add MAINTAINERS entry
jbd2: fix a potential leak of a journal_head on an error path
ext4: teach ext4_ext_split to calculate extents efficiently
ext4: Convert ext4 to new truncate calling convention
ext4: do not normalize block requests from fallocate()
ext4: enable "punch hole" functionality
ext4: add "punch hole" flag to ext4_map_blocks()
ext4: punch out extents
ext4: add new function ext4_block_zero_page_range()
ext4: add flag to ext4_has_free_blocks
ext4: reserve inodes and feature code for 'quota' feature
ext4: add support for multiple mount protection
ext4: ensure f_bfree returned by ext4_statfs() is non-negative
ext4: protect bb_first_free in ext4_trim_all_free() with group lock
ext4: only load buddy bitmap in ext4_trim_fs() when it is needed
jbd2: Fix comment to match the code in jbd2__journal_start()
ext4: fix waiting and sending of a barrier in ext4_sync_file()
jbd2: Add function jbd2_trans_will_send_data_barrier()
jbd2: fix sending of data flush on journal commit
ext4: fix ext4_ext_fiemap_cb() to handle blocks before request range correctly
...
jbd2__journal_start() returns an ERR_PTR() value rather than NULL on
failure.
Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Provide a function which returns whether a transaction with given tid
will send a flush to the filesystem device. The function will be used
by ext4 to detect whether fsync needs to send a separate flush or not.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In data=ordered mode, it's theoretically possible (however rare) that
an inode is filed to transaction's t_inode_list and a flusher thread
writes all the data and inode is reclaimed before the transaction
starts to commit. In such a case, we could erroneously omit sending a
flush to file system device when it is different from the journal
device (because data can still be in disk cache only).
Fix the problem by setting a flag in a transaction when some inode is added
to it and then send disk flush in the commit code when the flag is set.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
t_max_wait is added in commit 8e85fb3f to indicate how long we
were waiting for new transaction to start. In commit 6d0bf005,
it is moved to another function named update_t_max_wait to
avoid a build warning. But the wrong thing is that the original
'ts' is initialized in the start of function start_this_handle
and we can calculate t_max_wait in the right way. while with
this change, ts is initialized within the function and t_max_wait
can never be calculated right.
This patch moves the initialization of ts to the original beginning
of start_this_handle and pass it to function update_t_max_wait so
that it can be calculated right and the build warning is avoided also.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
summarise_journal_usage seems to be obsolete for a long time,
so remove it.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In do_get_write_access() we wait on BH_Unshadow bit for buffer to get
from shadow state. The waking code in journal_commit_transaction() has
a bug because it does not issue a memory barrier after the buffer is
moved from the shadow state and before wake_up_bit() is called. Thus a
waitqueue check can happen before the buffer is actually moved from
the shadow state and waiting process may never be woken. Fix the
problem by issuing proper barrier.
Reported-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If an application program does not make any changes to the indirect
blocks or extent tree, i_datasync_tid will not get updated. If there
are enough commits (i.e., 2**31) such that tid_geq()'s calculations
wrap, and there isn't a currently active transaction at the time of
the fdatasync() call, this can end up triggering a BUG_ON in
fs/jbd2/commit.c:
J_ASSERT(journal->j_running_transaction != NULL);
It's pretty rare that this can happen, since it requires the use of
fdatasync() plus *very* frequent and excessive use of fsync(). But
with the right workload, it can.
We fix this by replacing the use of tid_geq() with an equality test,
since there's only one valid transaction id that we is valid for us to
wait until it is commited: namely, the currently running transaction
(if it exists).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix data corruption regression by reverting commit 6de9843dab
ext4: Allow indirect-block file to grow the file size to max file size
ext4: allow an active handle to be started when freezing
ext4: sync the directory inode in ext4_sync_parent()
ext4: init timer earlier to avoid a kernel panic in __save_error_info
jbd2: fix potential memory leak on transaction commit
ext4: fix a double free in ext4_register_li_request
ext4: fix credits computing for indirect mapped files
ext4: remove unnecessary [cm]time update of quota file
jbd2: move bdget out of critical section
There is potential memory leak of journal head in function
jbd2_journal_commit_transaction. The problem is that JBD2 will not
reclaim the journal head of commit record if error occurs or journal
is abotred.
I use the following script to reproduce this issue, on a RHEL6
system. I found it very easy to reproduce with async commit enabled.
mount /dev/sdb /mnt -o journal_checksum,journal_async_commit
touch /mnt/xxx
echo offline > /sys/block/sdb/device/state
sync
umount /mnt
rmmod ext4
rmmod jbd2
Removal of the jbd2 module will make slab complaining that
"cache `jbd2_journal_head': can't free all objects".
Signed-off-by: Zhang Huan <zhhuan@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
bdget() should not be called when we hold spinlocks since
it might sleep.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Zhu Yanhai <gaoyang.zyh@taobao.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for-2.6.39/core' of git://git.kernel.dk/linux-2.6-block: (65 commits)
Documentation/iostats.txt: bit-size reference etc.
cfq-iosched: removing unnecessary think time checking
cfq-iosched: Don't clear queue stats when preempt.
blk-throttle: Reset group slice when limits are changed
blk-cgroup: Only give unaccounted_time under debug
cfq-iosched: Don't set active queue in preempt
block: fix non-atomic access to genhd inflight structures
block: attempt to merge with existing requests on plug flush
block: NULL dereference on error path in __blkdev_get()
cfq-iosched: Don't update group weights when on service tree
fs: assign sb->s_bdi to default_backing_dev_info if the bdi is going away
block: Require subsystems to explicitly allocate bio_set integrity mempool
jbd2: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
jbd: finish conversion from WRITE_SYNC_PLUG to WRITE_SYNC and explicit plugging
fs: make fsync_buffers_list() plug
mm: make generic_writepages() use plugging
blk-cgroup: Add unaccounted time to timeslice_used.
block: fixup plugging stubs for !CONFIG_BLOCK
block: remove obsolete comments for blkdev_issue_zeroout.
blktrace: Use rq->cmd_flags directly in blk_add_trace_rq.
...
Fix up conflicts in fs/{aio.c,super.c}
'write_op' was still used, even though it was always WRITE_SYNC now.
Add plugging around the cases where it submits IO, and flush them
before we end up waiting for that IO.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
With the plugging now being explicitly controlled by the
submitter, callers need not pass down unplugging hints
to the block layer. If they want to unplug, it's because they
manually plugged on their own - in which case, they should just
unplug at will.
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
The Patch below removes one to many "n's" in a word..
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: linux-ext4@vger.kernel.org
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>
On an SMP ARM system running ext4, I've received a report that the
first J_ASSERT in jbd2_journal_commit_transaction has been triggering:
J_ASSERT(journal->j_running_transaction != NULL);
While investigating possible causes for this problem, I noticed that
__jbd2_log_start_commit() is getting called with j_state_lock only
read-locked, in spite of the fact that it's possible for it might
j_commit_request. Fix this by grabbing the necessary information so
we can test to see if we need to start a new transaction before
dropping the read lock, and then calling jbd2_log_start_commit() which
will grab the write lock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Replace the jbd2_inode structure (which is 48 bytes) with a pointer
and only allocate the jbd2_inode when it is needed --- that is, when
the file system has a journal present and the inode has been opened
for writing. This allows us to further slim down the ext4_inode_info
structure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
'buffer_head' should be 'journal_head'
This is a port of a patch which Namhyung Kim <namhyung@gmail.com> made
to fs/jbd to jbd2.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
We had an open-coded version of printk_ratelimited(); use the provided
abstraction to make the code cleaner and easier to understand.
Based on a similar patch for fs/jbd from Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
In jbd2_journal_init_dev(), we need make sure the journal structure is
fully initialzied before calling jbd2_stats_proc_init().
Reviewed-by: Andreas Dilger <andreas.dilger@oracle.com>
Signed-off-by: yangsheng <sheng.yang@oracle.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
jbd2_slab_create_sem is used as a mutex, so make it one.
[ akpm muttered: We may as well make it local to
jbd2_journal_create_slab() also. ]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <alpine.LFD.2.00.1010162231480.2496@localhost6.localdomain6>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* 'upstream-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (50 commits)
ext4,jbd2: convert tracepoints to use major/minor numbers
ext4: optimize orphan_list handling for ext4_setattr
ext4: fix unbalanced mutex unlock in error path of ext4_li_request_new
ext4: fix compile error in ext4_fallocate()
ext4: move ext4_mb_{get,put}_buddy_cache_lock and make them static
ext4: rename mark_bitmap_end() to ext4_mark_bitmap_end()
ext4: move flush_completed_IO to fs/ext4/fsync.c and make it static
ext4: rename {ext,idx}_pblock and inline small extent functions
ext4: make various ext4 functions be static
ext4: rename {exit,init}_ext4_*() to ext4_{exit,init}_*()
ext4: fix kernel oops if the journal superblock has a non-zero j_errno
ext4: update writeback_index based on last page scanned
ext4: implement writeback livelock avoidance using page tagging
ext4: tidy up a void argument in inode.c
ext4: add batched_discard into ext4 feature list
ext4: Add batched discard support for ext4
fs: Add FITRIM ioctl
ext4: Use return value from sb_issue_discard()
ext4: Check return value of sb_getblk() and friends
ext4: use bio layer instead of buffer layer in mpage_da_submit_io
...
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (24 commits)
quota: Fix possible oops in __dquot_initialize()
ext3: Update kernel-doc comments
jbd/2: fixed typos
ext2: fixed typo.
ext3: Fix debug messages in ext3_group_extend()
jbd: Convert atomic_inc() to get_bh()
ext3: Remove misplaced BUFFER_TRACE() in ext3_truncate()
jbd: Fix debug message in do_get_write_access()
jbd: Check return value of __getblk()
ext3: Use DIV_ROUND_UP() on group desc block counting
ext3: Return proper error code on ext3_fill_super()
ext3: Remove unnecessary casts on bh->b_data
ext3: Cleanup ext3_setup_super()
quota: Fix issuing of warnings from dquot_transfer
quota: fix dquot_disable vs dquot_transfer race v2
jbd: Convert bitops to buffer fns
ext3/jbd: Avoid WARN() messages when failing to write the superblock
jbd: Use offset_in_page() instead of manual calculation
jbd: Remove unnecessary goto statement
jbd: Use printk_ratelimited() in journal_alloc_journal_head()
...
An attempt to modify the file system during the call to
jbd2_destroy_journal() can lead to a system lockup. So add some
checking to make it much more obvious when this happens to and to
determine where the offending code is located.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This fixes a hang seen in jbd2_journal_release_jbd_inode
on a lot of Power 6 systems running with ext4. When we get
in the hung state, all I/O to the disk in question gets blocked
where we stay indefinitely. Looking at the task list, I can see
we are stuck in jbd2_journal_release_jbd_inode waiting on a
wake up. I added some debug code to detect this scenario and
dump additional data if we were stuck in jbd2_journal_release_jbd_inode
for longer than 30 minutes. When it hit, I was able to see that
i_flags was 0, suggesting we missed the wake up.
This patch changes i_flags to be an unsigned long, uses bit operators
to access it, and adds barriers around the accesses. Prior to applying
this patch, we were regularly hitting this hang on numerous systems
in our test environment. After applying the patch, the hangs no longer
occur.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for-2.6.37/barrier' of git://git.kernel.dk/linux-2.6-block: (46 commits)
xen-blkfront: disable barrier/flush write support
Added blk-lib.c and blk-barrier.c was renamed to blk-flush.c
block: remove BLKDEV_IFL_WAIT
aic7xxx_old: removed unused 'req' variable
block: remove the BH_Eopnotsupp flag
block: remove the BLKDEV_IFL_BARRIER flag
block: remove the WRITE_BARRIER flag
swap: do not send discards as barriers
fat: do not send discards as barriers
ext4: do not send discards as barriers
jbd2: replace barriers with explicit flush / FUA usage
jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier
jbd: replace barriers with explicit flush / FUA usage
nilfs2: replace barriers with explicit flush / FUA usage
reiserfs: replace barriers with explicit flush / FUA usage
gfs2: replace barriers with explicit flush / FUA usage
btrfs: replace barriers with explicit flush / FUA usage
xfs: replace barriers with explicit flush / FUA usage
block: pass gfp_mask and flags to sb_issue_discard
dm: convey that all flushes are processed as empty
...
* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits)
cfq-iosched: Fix a gcc 4.5 warning and put some comments
block: Turn bvec_k{un,}map_irq() into static inline functions
block: fix accounting bug on cross partition merges
block: Make the integrity mapped property a bio flag
block: Fix double free in blk_integrity_unregister
block: Ensure physical block size is unsigned int
blkio-throttle: Fix possible multiplication overflow in iops calculations
blkio-throttle: limit max iops value to UINT_MAX
blkio-throttle: There is no need to convert jiffies to milli seconds
blkio-throttle: Fix link failure failure on i386
blkio: Recalculate the throttled bio dispatch time upon throttle limit change
blkio: Add root group to td->tg_list
blkio: deletion of a cgroup was causes oops
blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n
block: set the bounce_pfn to the actual DMA limit rather than to max memory
block: revert bad fix for memory hotplug causing bounces
Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK
block: set the bounce_pfn to the actual DMA limit rather than to max memory
block: Prevent hang_check firing during long I/O
cfq: improve fsync performance for small files
...
Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h
Fsync performance for small files achieved by cfq on high-end disks is
lower than what deadline can achieve, due to idling introduced between
the sync write happening in process context and the journal commit.
Moreover, when competing with a sequential reader, a process writing
small files and fsync-ing them is starved.
This patch fixes the two problems by:
- marking journal commits as WRITE_SYNC, so that they get the REQ_NOIDLE
flag set,
- force all queues that have REQ_NOIDLE requests to be put in the noidle
tree.
Having the queue associated to the fsync-ing process and the one associated
to journal commits in the noidle tree allows:
- switching between them without idling,
- fairness vs. competing idling queues, since they will be serviced only
after the noidle tree expires its slice.
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Corrado Zoccolo <czoccolo@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
All the blkdev_issue_* helpers can only sanely be used for synchronous
caller. To issue cache flushes or barriers asynchronously the caller needs
to set up a bio by itself with a completion callback to move the asynchronous
state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always
specified when calling blkdev_issue_* and also remove the now unused flags
argument to blkdev_issue_flush and blkdev_issue_zeroout. For
blkdev_issue_discard we need to keep it for the secure discard flag, which
gains a more descriptive name and loses the bitops vs flag confusion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Before we start accessing a huge (> 16 TiB) OCFS2 volume, we need to
confirm that its journal supports 64-bit offsets. In particular, we
need to check the journal's feature bits before recovering the journal.
This is not possible with JBD2 at present, because the journal
superblock (where the feature bits reside) is not loaded from disk until
the journal is recovered.
This patch loads the journal superblock in
jbd2_journal_check_used_features() if it has not already been loaded,
allowing us to check the feature bits before journal recovery.
Signed-off-by: Patrick LoPresti <lopresti@gmail.com>
Cc: linux-ext4@vger.kernel.org
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Switch to the WRITE_FLUSH_FUA flag for journal commits and remove the
EOPNOTSUPP detection for barriers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
Currently JBD2 relies blkdev_issue_flush() draining the queue when ASYNC_COMMIT
feature is set. This property is going away so make JBD2 wait for buffers it
needs on its own before submitting the cache flush.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
These flags aren't real I/O types, but tell ll_rw_block to always
lock the buffer instead of giving up on a failed trylock.
Instead add a new write_dirty_buffer helper that implements this semantic
and use it from the existing SWRITE* callers. Note that the ll_rw_block
code had a bug where it didn't promote WRITE_SYNC_PLUG properly, which
this patch fixes.
In the ufs code clean up the helper that used to call ll_rw_block
to mirror sync_dirty_buffer, which is the function it implements for
compound buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Instead of abusing a buffer_head flag just add a variant of
sync_dirty_buffer which allows passing the exact type of write
flag required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: Adding error check after calling ext4_mb_regular_allocator()
ext4: Fix dirtying of journalled buffers in data=journal mode
ext4: re-inline ext4_rec_len_(to|from)_disk functions
jbd2: Remove t_handle_lock from start_this_handle()
jbd2: Change j_state_lock to be a rwlock_t
jbd2: Use atomic variables to avoid taking t_handle_lock in jbd2_journal_stop
ext4: Add mount options in superblock
ext4: force block allocation on quota_off
ext4: fix freeze deadlock under IO
ext4: drop inode from orphan list if ext4_delete_inode() fails
ext4: check to make make sure bd_dev is set before dereferencing it
jbd2: Make barrier messages less scary
ext4: don't print scary messages for allocation failures post-abort
ext4: fix EFBIG edge case when writing to large non-extent file
ext4: fix ext4_get_blocks references
ext4: Always journal quota file modifications
ext4: Fix potential memory leak in ext4_fill_super
ext4: Don't error out the fs if the user tries to make a file too big
ext4: allocate stripe-multiple IOs on stripe boundaries
ext4: move aio completion after unwritten extent conversion
...
Fix up conflicts in fs/ext4/inode.c as per Ted.
Fix up xfs conflicts as per earlier xfs merge.
This should remove the last exclusive lock from start_this_handle(),
so that we should now be able to start multiple transactions at the
same time on large SMP systems.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Lockstat reports have shown that j_state_lock is a major source of
lock contention, especially on systems with more than 4 CPU cores. So
change it to be a read/write spinlock.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
By using an atomic_t for t_updates and t_outstanding credits, this
should allow us to not need to take transaction t_handle_lock in
jbd2_journal_stop().
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Saying things like "sync failed" when a device does
not support barriers makes users slightly more worried than
they need to be; rather than talking about sync failures,
let's just state the barrier-based facts.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
__GFP_NOFAIL is going away, so add our own retry loop. Also add
jbd2__journal_start() and jbd2__journal_restart() which take a gfp
mask, so that file systems can optionally (re)start transaction
handles using GFP_KERNEL. If they do this, then they need to be
prepared to handle receiving an PTR_ERR(-ENOMEM) error, and be ready
to reflect that error up to userspace.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
OCFS2 uses t_commit trigger to compute and store checksum of the just
committed blocks. When a buffer has b_frozen_data, checksum is computed
for it instead of b_data but this can result in an old checksum being
written to the filesystem in the following scenario:
1) transaction1 is opened
2) handle1 is opened
3) journal_access(handle1, bh)
- This sets jh->b_transaction to transaction1
4) modify(bh)
5) journal_dirty(handle1, bh)
6) handle1 is closed
7) start committing transaction1, opening transaction2
8) handle2 is opened
9) journal_access(handle2, bh)
- This copies off b_frozen_data to make it safe for transaction1 to commit.
jh->b_next_transaction is set to transaction2.
10) jbd2_journal_write_metadata() checksums b_frozen_data
11) the journal correctly writes b_frozen_data to the disk journal
12) handle2 is closed
- There was no dirty call for the bh on handle2, so it is never queued for
any more journal operation
13) Checkpointing finally happens, and it just spools the bh via normal buffer
writeback. This will write b_data, which was never triggered on and thus
contains a wrong (old) checksum.
This patch fixes the problem by calling the trigger at the moment data is
frozen for journal commit - i.e., either when b_frozen_data is created by
do_get_write_access or just before we write a buffer to the log if
b_frozen_data does not exist. We also rename the trigger to t_frozen as
that better describes when it is called.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
No real bugs found, just removed some dead code.
Found by gcc 4.6's new warnings.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: Make fsync sync new parent directories in no-journal mode
ext4: Drop whitespace at end of lines
ext4: Fix compat EXT4_IOC_ADD_GROUP
ext4: Conditionally define compat ioctl numbers
tracing: Convert more ext4 events to DEFINE_EVENT
ext4: Add new tracepoints to track mballoc's buddy bitmap loads
ext4: Add a missing trace hook
ext4: restart ext4_ext_remove_space() after transaction restart
ext4: Clear the EXT4_EOFBLOCKS_FL flag only when warranted
ext4: Avoid crashing on NULL ptr dereference on a filesystem error
ext4: Use bitops to read/modify i_flags in struct ext4_inode_info
ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE()
ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks()
ext4: Add new abstraction ext4_map_blocks() underneath ext4_get_blocks()
ext4: Use our own write_cache_pages()
ext4: Show journal_checksum option
ext4: Fix for ext4_mb_collect_stats()
ext4: check for a good block group before loading buddy pages
ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate
ext4: Remove extraneous newlines in ext4_msg() calls
...
Fixed up trivial conflict in fs/ext4/fsync.c
One of the most contended locks in the jbd2 layer is j_state_lock when
running dbench. This is especially true if using the real-time kernel
with its "sleeping spinlocks" patch that replaces spinlocks with
priority inheriting mutexes --- but it also shows up on large SMP
benchmarks.
Thanks to John Stultz for pointing this out.
Reviewed by Mingming Cao and Jan Kara.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The patch just convert all blkdev_issue_xxx function to common
set of flags. Wait/allocation semantics preserved.
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
commit_transaction has the same value as journal->j_running_transaction,
so we can simplify the assert statement.
Signed-off-by: dingdinghua <dingdinghua@nrchpc.ac.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Delay discarding buffers in journal_unmap_buffer until
we know that "add to orphan" operation has definitely been
committed, otherwise the log space of committing transation
may be freed and reused before truncate get committed, updates
may get lost if crash happens.
Signed-off-by: dingdinghua <dingdinghua@nrchpc.ac.cn>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Now that the SLUB seems to be fixed so that it respects the requested
alignment, use kmem_cache_alloc() to allocator if the block size of
the buffer heads to be allocated is less than the page size.
Previously, we were using 16k page on a Power system for each buffer,
even when the file system was using 1k or 4k block size.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
It triggers the warning in get_page_from_freelist(), and it isn't
appropriate to use __GFP_NOFAIL here anyway.
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14843
Reported-by: Christian Casteyde <casteyde.christian@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This is a bit complicated because we are trying to optimize when we
send barriers to the fs data disk. We could just throw in an extra
barrier to the data disk whenever we send a barrier to the journal
disk, but that's not always strictly necessary.
We only need to send a barrier during a commit when there are data
blocks which are must be written out due to an inode written in
ordered mode, or if fsync() depends on the commit to force data blocks
to disk. Finally, before we drop transactions from the beginning of
the journal during a checkpoint operation, we need to guarantee that
any blocks that were flushed out to the data disk are firmly on the
rust platter before we drop the transaction from the journal.
Thanks to Oleg Drokin for pointing out this flaw in ext3/ext4.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
jbd-debug and jbd2-debug is currently read-only (S_IRUGO), which is not
correct. Make it writable so that we can start debuging.
Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
This reverts commit e4c570c4cb, as
requested by Alexey:
"I think I gave a good enough arguments to not merge it.
To iterate:
* patch makes impossible to start using ext3 on EXT3_FS=n kernels
without reboot.
* this is done only for one pointer on task_struct"
None of config options which define task_struct are tristate directly
or effectively."
Requested-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
journal_info in task_struct is used in journaling file system only. So
introduce CONFIG_FS_JOURNAL_INFO and make it conditional.
Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
ext3: Fix data / filesystem corruption when write fails to copy data
ext4: Support for 64-bit quota format
ext3: Support for vfsv1 quota format
quota: Implement quota format with 64-bit space and inode limits
quota: Move definition of QFMT_OCFS2 to linux/quota.h
ext2: fix comment in ext2_find_entry about return values
ext3: Unify log messages in ext3
ext2: clear uptodate flag on super block I/O error
ext2: Unify log messages in ext2
ext3: make "norecovery" an alias for "noload"
ext3: Don't update the superblock in ext3_statfs()
ext3: journal all modifications in ext3_xattr_set_handle
ext2: Explicitly assign values to on-disk enum of filetypes
quota: Fix WARN_ON in lookup_one_len
const: struct quota_format_ops
ubifs: remove manual O_SYNC handling
afs: remove manual O_SYNC handling
kill wait_on_page_writeback_range
vfs: Implement proper O_SYNC semantics
...
All callers really want the more logical filemap_fdatawait_range interface,
so convert them to use it and merge wait_on_page_writeback_range into
filemap_fdatawait_range.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
If there is a failed journal checksum, don't reset the journal. This
allows for userspace programs to decide how to recover from this
situation. It may be that ignoring the journal checksum failure might
be a better way of recovering the file system. Once we add per-block
checksums, we can definitely do better. Until then, a system
administrator can try backing up the file system image (or taking a
snapshot) and and trying to determine experimentally whether ignoring
the checksum failure or aborting the journal replay results in less
data loss.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
If journal init fails, we need to free j_wbuf.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The /proc/fs/jbd2/<dev>/history was maintained manually; by using
tracepoints, we can get all of the existing functionality of the /proc
file plus extra capabilities thanks to the ftrace infrastructure. We
save memory as a bonus.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
There are a number of kernel printk's which are printed when an ext4
filesystem is mounted and unmounted. Disable them to economize space
in the system logs. In addition, disabling the mballoc stats by
default saves a number of unneeded atomic operations for every block
allocation or deallocation.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make all seq_operations structs const, to help mitigate against
revectoring user-triggerable function pointers.
This is derived from the grsecurity patch, although generated from scratch
because it's simpler than extracting the changes from there.
Signed-off-by: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously the journal_async_commit mount option was equivalent to
using barrier=0 (and just as unsafe). This patch fixes it so that we
eliminate the barrier before the commit block (by not using ordered
mode), and explicitly issuing an empty barrier bio after writing the
commit block. Because of the journal checksum, it is safe to do this;
if the journal blocks are not all written before a power failure, the
checksum in the commit block will prevent the last transaction from
being replayed.
Using the fs_mark benchmark, using journal_async_commit shows a 50%
improvement:
FSUse% Count Size Files/sec App Overhead
8 1000 10240 30.5 28242
vs.
FSUse% Count Size Files/sec App Overhead
8 1000 10240 45.8 28620
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
lockdep annotation for a transaction start has been at the end of
jbd2_journal_start(). But a transaction is also started from
jbd2_journal_restart(). Move the lockdep annotation to start_this_handle()
which covers both cases.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
fix jiffie rounding in jbd commit timer setup code. Rounding down
could cause the timer to be fired before the corresponding transaction
has expired. That transaction can stay not committed forever if no
new transaction is created or expicit sync/umount happens.
Signed-off-by: Alex Zhuravlev (Tomas) <alex.zhuravlev@sun.com>
Signed-off-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Due to on disk corruption, it can happen that journal is too short. Fail
to load it in such case so that we don't oops somewhere later.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The function jbd2_journal_write_metadata_buffer() calls
jbd_unlock_bh_state(bh_in) too early; this could potentially allow
another thread to call get_write_access on the buffer head, modify the
data, and dirty it, and allowing the wrong data to be written into the
journal. Fortunately, if we lose this race, the only time this will
actually cause filesystem corruption is if there is a system crash or
other unclean shutdown of the system before the next commit can take
place.
Signed-off-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The following race can happen:
CPU1 CPU2
checkpointing code checks the buffer, adds
it to an array for writeback
do_get_write_access()
...
lock_buffer()
unlock_buffer()
flush_batch() submits the buffer for IO
__jbd2_journal_file_buffer()
So a buffer under writeout is returned from
do_get_write_access(). Since the filesystem code relies on the fact
that journaled buffers cannot be written out, it does not take the
buffer lock and so it can modify buffer while it is under
writeout. That can lead to a filesystem corruption if we crash at the
right moment.
We fix the problem by clearing the buffer dirty bit under buffer_lock
even if the buffer is on BJ_None list. Actually, we clear the dirty
bit regardless the list the buffer is in and warn about the fact if
the buffer is already journalled.
Thanks for spotting the problem goes to dingdinghua <dingdinghua85@gmail.com>.
Reported-by: dingdinghua <dingdinghua85@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch reverts 3f31fddf, which is no longer needed because if a
race between freeing buffer and committing transaction functionality
occurs and dio gets error, currently dio falls back to buffered IO due
to the commit 6ccfa806.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Mingming Cao <cmm@us.ibm.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The revoke records must be written using the same way as the rest of
the blocks during the commit process; that is, either marked as
synchronous writes or as asynchornous writes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When you are going to be submitting several sync writes, we want to
give the IO scheduler a chance to merge some of them. Instead of
using the implicitly unplugging WRITE_SYNC variant, use WRITE_SYNC_PLUG
and rely on sync_buffer() doing the unplug when someone does a
wait_on_buffer()/lock_buffer().
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update information about locking in JBD2 revoke code. Inconsistency in
comments found by Lin Tan <tammy000@gmail.com>.
CC: Lin Tan <tammy000@gmail.com>.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a commit is triggered by fsync(), set a flag indicating the journal
blocks associated with the transaction should be flushed out using
WRITE_SYNC.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If we race with commit code setting i_transaction to NULL, we could
possibly dereference it. Proper locking requires the journal pointer
(to access journal->j_list_lock), which we don't have. So we have to
change the prototype of the function so that filesystem passes us the
journal pointer. Also add a more detailed comment about why the
function jbd2_journal_begin_ordered_truncate() does what it does and
how it should be used.
Thanks to Dan Carpenter <error27@gmail.com> for pointing to the
suspitious code.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Joel Becker <joel.becker@oracle.com>
CC: linux-ext4@vger.kernel.org
CC: ocfs2-devel@oss.oracle.com
CC: mfasheh@suse.de
CC: Dan Carpenter <error27@gmail.com>
The function jbd2_journal_start_commit() returns 1 if either a
transaction is committing or the function has queued a transaction
commit. But it returns 0 if we raced with somebody queueing the
transaction commit as well. This resulted in ext4_sync_fs() not
functioning correctly (description from Arthur Jones):
In the case of a data=ordered umount with pending long symlinks
which are delayed due to a long list of other I/O on the backing
block device, this causes the buffer associated with the long
symlinks to not be moved to the inode dirty list in the second
phase of fsync_super. Then, before they can be dirtied again,
kjournald exits, seeing the UMOUNT flag and the dirty pages are
never written to the backing block device, causing long symlink
corruption and exposing new or previously freed block data to
userspace.
This can be reproduced with a script created by Eric Sandeen
<sandeen@redhat.com>:
#!/bin/bash
umount /mnt/test2
mount /dev/sdb4 /mnt/test2
rm -f /mnt/test2/*
dd if=/dev/zero of=/mnt/test2/bigfile bs=1M count=512
touch /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
ln -s /mnt/test2/thisisveryveryveryveryveryveryveryveryveryveryveryveryveryveryveryverylongfilename
/mnt/test2/link
umount /mnt/test2
mount /dev/sdb4 /mnt/test2
ls /mnt/test2/
This patch fixes jbd2_journal_start_commit() to always return 1 when
there's a transaction committing or queued for commit.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
CC: Eric Sandeen <sandeen@redhat.com>
CC: linux-ext4@vger.kernel.org
the following warning:
fs/jbd2/journal.c: In function ‘jbd2_seq_info_show’:
fs/jbd2/journal.c:850: warning: format ‘%lu’ expects type ‘long
unsigned int’, but argument 3 has type ‘uint32_t’
is caused by wrong usage of do_div that modifies the dividend in-place
and returns the quotient. So not only would an incorrect value be
displayed, but s->journal->j_average_commit_time would also be changed
to a wrong value!
Fix it by using div_u64 instead.
Signed-off-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
ext4: Remove "extents" mount option
block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
ext4: Make printk's consistently prefixed with "EXT4-fs: "
ext4: Add sanity checks for the superblock before mounting the filesystem
ext4: Add mount option to set kjournald's I/O priority
jbd2: Submit writes to the journal using WRITE_SYNC
jbd2: Add pid and journal device name to the "kjournald2 starting" message
ext4: Add markers for better debuggability
ext4: Remove code to create the journal inode
ext4: provide function to release metadata pages under memory pressure
ext3: provide function to release metadata pages under memory pressure
add releasepage hooks to block devices which can be used by file systems
ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
ext4: Init the complete page while building buddy cache
ext4: Don't allow new groups to be added during block allocation
ext4: mark the blocks/inode bitmap beyond end of group as used
ext4: Use new buffer_head flag to check uninit group bitmaps initialization
ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
ext4: code cleanup
...
On 32-bit system with CONFIG_LBD getblk can fail because provided
block number is too big. Add error checks so we fail gracefully if
getblk() returns NULL (which can also happen on memory allocation
failures).
Thanks to David Maciejak from Fortinet's FortiGuard Global Security
Research Team for reporting this bug.
http://bugzilla.kernel.org/show_bug.cgi?id=12370
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
cc: stable@kernel.org
Filesystems often to do compute intensive operation on some
metadata. If this operation is repeated many times, it can be very
expensive. It would be much nicer if the operation could be performed
once before a buffer goes to disk.
This adds triggers to jbd2 buffer heads. Just before writing a metadata
buffer to the journal, jbd2 will optionally call a commit trigger associated
with the buffer. If the journal is aborted, an abort trigger will be
called on any dirty buffers as they are dropped from pending
transactions.
ocfs2 will use this feature.
Initially I tried to come up with a more generic trigger that could be
used for non-buffer-related events like transaction completion. It
doesn't tie nicely, because the information a buffer trigger needs
(specific to a journal_head) isn't the same as what a transaction
trigger needs (specific to a tranaction_t or perhaps journal_t). So I
implemented a buffer set, with the understanding that
journal/transaction wide triggers should be implemented separately.
There is only one trigger set allowed per buffer. I can't think of any
reason to attach more than one set. Contrast this with a journal or
transaction in which multiple places may want to watch the entire
transaction separately.
The trigger sets are considered static allocation from the jbd2
perspective. ocfs2 will just have one trigger set per block type,
setting the same set on every bh of the same type.
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Since we will be waiting the write of the commit record to the journal
to complete in journal_submit_commit_record(), submit it using
WRITE_SYNC.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This code has been obsolete in quite some time, since the supported
method for adding a journal inode is to use tune2fs (or to creating
new filesystem with a journal via mke2fs or mkfs.ext4).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Avoid freeing the transaction in __jbd2_journal_drop_transaction() so
the journal commit callback can run without holding j_list_lock, to
avoid lock contention on this spinlock.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
jbd2_log_do_checkpoint()n is one of the kernel's largest stack users.
Move the array of buffer head's from the stack of jbd2_log_do_checkpoint()
to the in-core journal structure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Add new mount options, min_batch_time and max_batch_time, which
controls how long the jbd2 layer should wait for additional filesystem
operations to get batched with a synchronous write transaction.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Display the average commit time (which is used by the ext4 fsync
batching patch) in /proc/fs/jbd2/*/info for performance tuning
purposes.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch removes the static sleep time in favor of a more self
optimizing approach where we measure the average amount of time it
takes to commit a transaction to disk and the ammount of time a
transaction has been running. If somebody does a sync write or an
fsync() traditionally we would sleep for 1 jiffies, which depending on
the value of HZ could be a significant amount of time compared to how
long it takes to commit a transaction to the underlying storage. With
this patch instead of sleeping for a jiffie, we check to see if the
amount of time this transaction has been running is less than the
average commit time, and if it is we sleep for the delta using
schedule_hrtimeout to give us a higher precision sleep time. This
greatly benefits high end storage where you could end up sleeping for
longer than it takes to commit the transaction and therefore sitting
idle instead of allowing the transaction to be committed by keeping
the sleep time to a minimum so you are sure to always be doing
something.
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Xen doesn't report that barriers are not supported until buffer I/O is
reported as completed, instead of when the buffer I/O is submitted.
Add a check and a fallback codepath to journal_wait_on_commit_record()
to detect this case, so that attempts to mount ext4 filesystems on
LVM/devicemapper devices on Xen guests don't blow up with an "Aborting
journal on device XXX"; "Remounting filesystem read-only" error.
Thanks to Andreas Sundstrom for reporting this issue.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@kernel.org
jbd2_journal_init_inode() does not call jbd2_stats_proc_exit() on all
failure paths after calling jbd2_stats_proc_init(). This leaves
dangling references to the fs in proc.
This patch fixes a bug reported by Sami Leides at:
http://bugzilla.kernel.org/show_bug.cgi?id=11493
Signed-off-by: Sami Liedes <sliedes@cc.hut.fi>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Commit 23f8b79e introducd a regression because it assumed that if
there were no transactions ready to be checkpointed, that no progress
could be made on making space available in the journal, and so the
journal should be aborted. This assumption is false; it could be the
case that simply calling jbd2_cleanup_journal_tail() will recover the
necessary space, or, for small journals, the currently committing
transaction could be responsible for chewing up the required space in
the log, so we need to wait for the currently committing transaction
to finish before trying to force a checkpoint operation.
This patch fixes a bug reported by Mihai Harpau at:
https://bugzilla.redhat.com/show_bug.cgi?id=469582
This patch fixes a bug reported by François Valenduc at:
http://bugzilla.kernel.org/show_bug.cgi?id=11840
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Duane Griffin <duaneg@dghda.com>
Cc: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
The transaction can potentially get dropped if there are no buffers
that need to be written. Make sure we call the commit callback before
potentially deciding to drop the transaction. Also avoid
dereferencing the commit_transaction pointer in the marker for the
same reason.
This patch fixes the bug reported by Eric Paris at:
http://bugzilla.kernel.org/show_bug.cgi?id=11838
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Eric Sandeen <sandeen@redhat.com>
Tested-by: Eric Paris <eparis@redhat.com>
Use fs/*/Kconfig more, which is good because everything related to one
filesystem is in one place and fs/Kconfig is quite fat.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The multiblock allocator needs to be able to release blocks (and issue
a blkdev discard request) when the transaction which freed those
blocks is committed. Previously this was done via a polling mechanism
when blocks are allocated or freed. A much better way of doing things
is to create a jbd2 callback function and attaching the list of blocks
to be freed directly to the transaction structure.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the journal doesn't abort when it gets an IO error in file data
blocks, the file data corruption will spread silently. Because
most of applications and commands do buffered writes without fsync(),
they don't notice the IO error. It's scary for mission critical
systems. On the other hand, if the journal aborts whenever it gets
an IO error in file data blocks, the system will easily become
inoperable. So this patch introduces a filesystem option to
determine whether it aborts the journal or just call printk() when
it gets an IO error in file data.
If you mount an ext4 fs with data_err=abort option, it aborts on file
data write error. If you mount it with data_err=ignore, it doesn't
abort, just call printk(). data_err=ignore is the default.
Here is the corresponding patch of the ext3 version:
http://kerneltrap.org/mailarchive/linux-kernel/2008/9/9/3239374
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Currently, original metadata buffers are dirtied when they are
unfiled whether the journal has aborted or not. Eventually these
buffers will be written-back to the filesystem by pdflush. This
means some metadata buffers are written to the filesystem without
journaling if the journal aborts. So if both journal abort and
system crash happen at the same time, the filesystem would become
inconsistent state. Additionally, replaying journaled metadata
can overwrite the latest metadata on the filesystem partly.
Because, if the journal gets aborted, journaled metadata are
preserved and replayed during the next mount not to lose
uncheckpointed metadata. This would also break the consistency
of the filesystem.
This patch prevents original metadata buffers from being dirtied
on abort by clearing BH_JBDDirty flag from those buffers. Thus,
no metadata buffers are written to the filesystem without journaling.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a checkpointing IO fails, current JBD2 code doesn't check the
error and continue journaling. This means latest metadata can be
lost from both the journal and filesystem.
This patch leaves the failed metadata blocks in the journal space
and aborts journaling in the case of jbd2_log_do_checkpoint().
To achieve this, we need to do:
1. don't remove the failed buffer from the checkpoint list where in
the case of __try_to_free_cp_buf() because it may be released or
overwritten by a later transaction
2. jbd2_log_do_checkpoint() is the last chance, remove the failed
buffer from the checkpoint list and abort the journal
3. when checkpointing fails, don't update the journal super block to
prevent the journaled contents from being cleaned. For safety,
don't update j_tail and j_tail_sequence either
4. when checkpointing fails, notify this error to the ext4 layer so
that ext4 don't clear the needs_recovery flag, otherwise the
journaled contents are ignored and cleaned in the recovery phase
5. if the recovery fails, keep the needs_recovery flag
6. prevent jbd2_cleanup_journal_tail() from being called between
__jbd2_journal_drop_transaction() and jbd2_journal_abort()
(a possible race issue between jbd2_log_do_checkpoint()s called by
jbd2_journal_flush() and __jbd2_log_wait_for_space())
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If we failed to write metadata buffers to the journal space and
succeeded to write the commit record, stale data can be written
back to the filesystem as metadata in the recovery phase.
To avoid this, when we failed to write out metadata buffers,
abort the journal before writing the commit record.
We can also avoid this kind of corruption by using the journal
checksum feature because it can detect invalid metadata blocks in the
journal and avoid them from being replayed. So we don't need to care
about asynchronous commit record writeout with a checksum.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Also make sure the buffer heads are marked clean before submitting bh
for writing. The previous code was marking the buffer head dirty,
which would have forced an unneeded write (and seek) to the journal
for no good reason.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This debugging markers are designed to debug problems such as the
random filesystem latency problems reported by Arjan.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The __jbd2_log_wait_for_space function sits in a loop checkpointing
transactions until there is sufficient space free in the journal.
However, if there are no transactions to be processed (e.g. because the
free space calculation is wrong due to a corrupted filesystem) it will
never progress.
Check for space being required when no transactions are outstanding and
abort the journal instead of endlessly looping.
This patch fixes the bug reported by Sami Liedes at:
http://bugzilla.kernel.org/show_bug.cgi?id=10976
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: Sami Liedes <sliedes@cc.hut.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Calculate the journal device name once and stash it away in the
journal_s structure. This avoids needing to call bdevname()
everywhere and reduces stack usage by not needing to allocate an
on-stack buffer. In addition, we eliminate the '/' that can appear in
device names (e.g. "cciss/c0d0p9" --- see kernel bugzilla #11321) that
can cause problems when creating proc directory names, and include the
inode number to support ocfs2 which creates multiple journals with
different inode numbers.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
the names were too generic:
drivers/uio/uio.c:87: error: expected identifier or '(' before 'do'
drivers/uio/uio.c:87: error: expected identifier or '(' before 'while'
drivers/uio/uio.c:113: error: 'map_release' undeclared here (not in a function)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Most the free-standing lock_acquire() usages look remarkably similar, sweep
them into a new helper.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Converting page lock to new locking bitops requires a change of page flag
operation naming, so we might as well convert it to something nicer
(!TestSetPageLocked_Lock => trylock_page, SetPageLocked => set_page_locked).
This also facilitates lockdeping of page lock.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In ordered mode, the current jbd2 aborts the journal if a file data buffer
has an error. But this behavior is unintended, and we found that it has
been adopted accidentally.
This patch undoes it and just calls printk() instead of aborting the
journal. Unlike a similar patch for ext3/jbd, file data buffers are
written via generic_writepages(). But we also need to set AS_EIO
into their mappings because wait_on_page_writeback_range() clears
AS_EIO before a user process sees it.
Signed-off-by: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This provides a new ordered mode implementation which gets rid of using
buffer heads to enforce the ordering between metadata change with the
related data chage. Instead, in the new ordering mode, it keeps track
of all of the inodes touched by each transaction on a list, and when
that transaction is committed, it flushes all of the dirty pages for
those inodes. In addition, the new ordered mode reverses the lock
ordering of the page lock and transaction lock, which provides easier
support for delayed allocation.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch adds necessary framework into JBD2 to be able to track inodes
with each transaction and write-out their dirty data during transaction
commit time.
This new ordered mode brings all sorts of advantages such as possibility
to get rid of journal heads and buffer heads for data buffers in ordered
mode, better ordering of writes on transaction commit, simplification of
some JBD code, no more anonymous pages when truncate of data being
committed happens. Also with this new ordered mode, delayed allocation
on ordered mode is much simpler.
Signed-off-by: Jan Kara <jack@suse.cz>
journal_try_to_free_buffers() could race with jbd commit transaction
when the later is holding the buffer reference while waiting for the
data buffer to flush to disk. If the caller of
journal_try_to_free_buffers() request tries hard to release the buffers,
it will treat the failure as error and return back to the caller. We
have seen the directo IO failed due to this race. Some of the caller of
releasepage() also expecting the buffer to be dropped when passed with
GFP_KERNEL mask to the releasepage()->journal_try_to_free_buffers().
With this patch, if the caller is passing the GFP_KERNEL to indicating
this call could wait, in case of try_to_free_buffers() failed, let's
waiting for journal_commit_transaction() to finish commit the current
committing transaction , then try to free those buffers again with
journal locked.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Reviewed-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Carlo Wood has demonstrated that it's possible to recover deleted
files from the journal. Something that will make this easier is if we
can put the time of the commit into commit block.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If the device doesn't support write barriers, the write is retried
without ordered mode. But the buffer head needs to be re-locked or
submit_bh will fail with on BUG(!buffer_locked(bh)).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If a journal checksum error is detected, the ext4 filesystem will call
ext4_error(), and the mount will either continue, become a read-only
mount, or cause a kernel panic based on the superblock flags
indicating the user's preference of what to do in case of filesystem
corruption being detected.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Updating the current transaction's t_state is protected by j_state_lock. We
need to do the same when updating the t_state to T_COMMIT.
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
bdevname() fills the buffer that it is given as a parameter, so calling
strcpy() or snprintf() on the returned value is redundant (and probably not
guaranteed to work - I don't think strcpy and snprintf support overlapping
buffers.)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
jbd2 debugfs and stats entries should only be created if cache initialisation
is successful. At the moment they are being created unconditionally which
will leave them dangling if cache (and hence module) initialisation fails.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
If an error occurs during jbd2 cache initialisation it is possible for the
journal_head_cache to be NULL when jbd2_journal_destroy_journal_head_cache is
called. Replace the J_ASSERT with an if block to handle the situation
correctly.
Note that even with this fix things will break badly if jbd2 is statically
compiled in and cache initialisation fails.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The revocation table initialisation/destruction code is repeated for each of
the two revocation tables stored in the journal. Refactoring the duplicated
code into functions is tidier, simplifies the logic in initialisation in
particular, and slightly reduces the code size.
There should not be any functional change.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Make revocation cache destruction safe to call if initialisation fails
partially or entirely. This allows it to be used to cleanup in the case of
initialisation failure, simplifying the code slightly.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
There are several cases where the running transaction can get buffers
added to its BJ_Metadata list which it never dirtied, which makes its
t_nr_buffers counter end up larger than its t_outstanding_credits
counter.
This will cause issues when starting new transactions as while we are
logging buffers we decrement t_outstanding_buffers, so when
t_outstanding_buffers goes negative, we will report that we need less
space in the journal than we actually need, so transactions will be
started even though there may not be enough room for them. In the worst
case scenario (which admittedly is almost impossible to reproduce) this
will result in the journal running out of space.
The fix is to only refile buffers from the committing transaction to the
running transactions BJ_Modified list when b_modified is set on that
journal, which is the only way to be sure if the running transaction has
modified that buffer.
This patch also fixes an accounting error in journal_forget, it is
possible that we can call journal_forget on a buffer without having
modified it, only gotten write access to it, so instead of freeing a
credit, we only do so if the buffer was modified. The assert will help
catch if this problem occurs. Without these two patches I could hit
this assert within minutes of running postmark, with them this issue no
longer arises.
Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Currently at the start of a journal commit we loop through all of the buffers
on the committing transaction and clear the b_modified flag (the flag that is
set when a transaction modifies the buffer) under the j_list_lock.
The problem is that everywhere else this flag is modified only under the jbd2
lock buffer flag, so it will race with a running transaction who could
potentially set it, and have it unset by the committing transaction.
This is also a big waste, you can have several thousands of buffers that you
are clearing the modified flag on when you may not need to. This patch
removes this code and instead clears the b_modified flag upon entering
do_get_write_access/journal_get_create_access, so if that transaction does
indeed use the buffer then it will be accounted for properly, and if it does
not then we know we didn't use it.
That will be important for the next patch in this series. Tested thoroughly
by myself using postmark/iozone/bonnie++.
Cc: <linux-ext4@vger.kernel.org>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Josef Bacik <jbacik@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data
be setup before gluing PDE to main tree.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix a long-standing typo (predating git) that will cause data corruption if a
journal data block needs unescaping. At the moment the wrong buffer head's
data is being unescaped.
To test this case mount a filesystem with data=journal, start creating and
deleting a bunch of files containing only JBD2_MAGIC_NUMBER (0xc03b3998), then
pull the plug on the device. Without this patch the files will contain zeros
instead of the correct data after recovery.
Signed-off-by: Duane Griffin <duaneg@dghda.com>
Acked-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In JBD2 jbd2_journal_write_commit_record(), clear the buffer_ordered
flag for the bh after barried IO has succeed. This prevents later, if
the same buffer head were submitted to the underlying device, which has
been reconfigured to not support barrier request, the JBD2 commit code
could treat it as a normal IO (without barrier).
This is a port from JBD/ext3 fix from Neil Brown.
More details from Neil:
Some devices - notably dm and md - can change their behaviour in
response to BIO_RW_BARRIER requests. They might start out accepting
such requests but on reconfiguration, they find out that they cannot
any more. JBD2 deal with this by always testing if BIO_RW_BARRIER
requests fail with EOPNOTSUPP, and retrying the write
requests without the barrier (probably after waiting for any pending
writes to complete).
However there is a bug in the handling this in JBD2 for ext4 .
When ext4/JBD2 to submit a BIO_RW_BARRIER request,
it sets the buffer_ordered flag on the buffer head.
If the request completes successfully, the flag STAYS SET.
Other code might then write the same buffer_head after the device has
been reconfigured to not accept barriers. This write will then fail,
but the "other code" is not ready to handle EOPNOTSUPP errors and the
error will be treated as fatal.
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT needs to be checked with
JBD2_HAS_INCOMPAT_FEATURE
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
With journal checksum patch we added asynchronous commits of journal
commit headers, and accidentally dropped taking a reference on the
buffer head.
(Before the change, sync_dirty_buffer did the get_bh(). The associative
put_bh is done by journal_wait_on_commit_record().)
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The buffer head pointer passed to journal_wait_on_commit_record() could
be NULL if the previous journal_submit_commit_record() failed or journal
has already aborted.
Looking at the jbd2 debug messages, before the oops happened, the jbd2
is aborted due to trying to access the next log block beyond the end
of device. This might be caused by using a corrupted image.
We need to check the error returns from journal_submit_commit_record()
and avoid calling journal_wait_on_commit_record() in the failure case.
This addresses Kernel Bugzilla #9849
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
None of the callers of this function does actually take the BKL as far as I
can see. So remove the comment refering to the BKL.
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: <linux-ext4@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The break_lock data structure and code for spinlocks is quite nasty.
Not only does it double the size of a spinlock but it changes locking to
a potentially less optimal trylock.
Put all of that under CONFIG_GENERIC_LOCKBREAK, and introduce a
__raw_spin_is_contended that uses the lock data itself to determine whether
there are waiters on the lock, to be used if CONFIG_GENERIC_LOCKBREAK is
not set.
Rename need_lockbreak to spin_needbreak, make it use spin_is_contended to
decouple it from the spinlock implementation, and make it typesafe (rwlocks
do not have any need_lockbreak sites -- why do they even get bloated up
with that break_lock then?).
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Get rid of sparse related warnings from places that use integer as NULL
pointer. (Ported from upstream ext3/jbd changes.)
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
While "every 5 seconds" doesn't sound as a problem, there can be many
of these (and these timers do add up over all the kernel). The "5
second" wakeup isn't really timing sensitive; in addition even with
rounding it'll still happen every 5 seconds (with the exception of the
very first time, which is likely to be rounded up to somewhere closer
to 6 seconds)
(Ported from similar JBD patch made by Arjan van de Ven to
fs/jbd/transaction.c)
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
This patch marks slab allocations by jbd2 as short-lived in support of
Mel Gorman's "Group short-lived and reclaimable kernel allocations"
patch. (Ported from similar changes made to fs/jbd/journal.c and
fs/jbd/revoke.c in Mel's patch.)
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
The journal checksum feature adds two new flags i.e
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT and JBD2_FEATURE_COMPAT_CHECKSUM.
JBD2_FEATURE_CHECKSUM flag indicates that the commit block contains the
checksum for the blocks described by the descriptor blocks.
Due to checksums, writing of the commit record no longer needs to be
synchronous. Now commit record can be sent to disk without waiting for
descriptor blocks to be written to disk. This behavior is controlled
using JBD2_FEATURE_ASYNC_COMMIT flag. Older kernels/e2fsck should not be
able to recover the journal with _ASYNC_COMMIT hence it is made
incompat.
The commit header has been extended to hold the checksum along with the
type of the checksum.
For recovery in pass scan checksums are verified to ensure the sanity
and completeness(in case of _ASYNC_COMMIT) of every transaction.
Signed-off-by: Andreas Dilger <adilger@clusterfs.com>
Signed-off-by: Girish Shilamkar <girish@clusterfs.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
The patch below updates the jbd stats patch to 2.6.20/jbd2.
The initial patch was posted by Alex Tomas in December 2005
(http://marc.info/?l=linux-ext4&m=113538565128617&w=2).
It provides statistics via procfs such as transaction lifetime and size.
Sometimes, investigating performance problems, i find useful to have
stats from jbd about transaction's lifetime, size, etc. here is a
patch for review and inclusion probably.
for example, stats after creation of 3M files in htree directory:
[root@bob ~]# cat /proc/fs/jbd/sda/history
R/C tid wait run lock flush log hndls block inlog ctime write drop close
R 261 8260 2720 0 0 750 9892 8170 8187
C 259 750 0 4885 1
R 262 20 2200 10 0 770 9836 8170 8187
R 263 30 2200 10 0 3070 9812 8170 8187
R 264 0 5000 10 0 1340 0 0 0
C 261 8240 3212 4957 0
R 265 8260 1470 0 0 4640 9854 8170 8187
R 266 0 5000 10 0 1460 0 0 0
C 262 8210 2989 4868 0
R 267 8230 1490 10 0 4440 9875 8171 8188
R 268 0 5000 10 0 1260 0 0 0
C 263 7710 2937 4908 0
R 269 7730 1470 10 0 3330 9841 8170 8187
R 270 0 5000 10 0 830 0 0 0
C 265 8140 3234 4898 0
C 267 720 0 4849 1
R 271 8630 2740 20 0 740 9819 8170 8187
C 269 800 0 4214 1
R 272 40 2170 10 0 830 9716 8170 8187
R 273 40 2280 0 0 3530 9799 8170 8187
R 274 0 5000 10 0 990 0 0 0
where,
R - line for transaction's life from T_RUNNING to T_FINISHED
C - line for transaction's checkpointing
tid - transaction's id
wait - for how long we were waiting for new transaction to start
(the longest period journal_start() took in this transaction)
run - real transaction's lifetime (from T_RUNNING to T_LOCKED
lock - how long we were waiting for all handles to close
(time the transaction was in T_LOCKED)
flush - how long it took to flush all data (data=ordered)
log - how long it took to write the transaction to the log
hndls - how many handles got to the transaction
block - how many blocks got to the transaction
inlog - how many blocks are written to the log (block + descriptors)
ctime - how long it took to checkpoint the transaction
write - how many blocks have been written during checkpointing
drop - how many blocks have been dropped during checkpointing
close - how many running transactions have been closed to checkpoint this one
all times are in msec.
[root@bob ~]# cat /proc/fs/jbd/sda/info
280 transaction, each upto 8192 blocks
average:
1633ms waiting for transaction
3616ms running transaction
5ms transaction was being locked
1ms flushing data (in ordered mode)
1799ms logging transaction
11781 handles per transaction
5629 blocks per transaction
5641 logged blocks per transaction
Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Before we start committing a transaction, we call
__journal_clean_checkpoint_list() to cleanup transaction's written-back
buffers.
If this call happens to remove all of them (and there were already some
buffers), __journal_remove_checkpoint() will decide to free the transaction
because it isn't (yet) a committing transaction and soon we fail some
assertion - the transaction really isn't ready to be freed :).
We change the check in __journal_remove_checkpoint() to free only a
transaction in T_FINISHED state. The locking there is subtle though (as
everywhere in JBD ;(). We use j_list_lock to protect the check and a
subsequent call to __journal_drop_transaction() and do the same in the end
of journal_commit_transaction() which is the only place where a transaction
can get to T_FINISHED state.
Probably I'm too paranoid here and such locking is not really necessary -
checkpoint lists are processed only from log_do_checkpoint() where a
transaction must be already committed to be processed or from
__journal_clean_checkpoint_list() where kjournald itself calls it and thus
transaction cannot change state either. Better be safe if something
changes in future...
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mostly stolen from akpm's JBD cleanup patch.
- use `#ifdef foo' instead of `#if defined(foo)'
- Make journal_enable_debug __read_mostly just for the heck of it
- Make jbd_debugfs_dir and jbd_debug static
- debugfs_remove(NULL) is legal: remove unneeded tests
- remove unnecessary empty loops
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We should really call journal_abort() and not __journal_abort_hard() in
case of errors. The latter call does not record the error in the journal
superblock and thus filesystem won't be marked as with errors later (and
user could happily mount it without any warning).
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
JBD2: Replace slab allocations with page allocations
JBD2 allocate memory for committed_data and frozen_data from slab. However
JBD2 should not pass slab pages down to the block layer. Use page allocator
pages instead. This will also prepare JBD for the large blocksize patchset.
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Slab destructors were no longer supported after Christoph's
c59def9f22 change. They've been
BUGs for both slab and slub, and slob never supported them
either.
This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Looking at the current linus-git tree jbd_debug() define in
include/linux/jbd2.h
extern u8 journal_enable_debug;
#define jbd_debug(n, f, a...) \
do { \
if ((n) <= journal_enable_debug) { \
printk (KERN_DEBUG "(%s, %d): %s: ", \
__FILE__, __LINE__, __FUNCTION__); \
printk (f, ## a); \
} \
} while (0)
> fs/ext4/inode.c: In function âext4_write_inodeâ:
> fs/ext4/inode.c:2906: warning: comparison is always true due to limited
> range of data type
>
> fs/jbd2/recovery.c: In function âjbd2_journal_recoverâ:
> fs/jbd2/recovery.c:254: warning: comparison is always true due to
> limited range of data type
> fs/jbd2/recovery.c:257: warning: comparison is always true due to
> limited range of data type
>
> fs/jbd2/recovery.c: In function âjbd2_journal_skip_recoveryâ:
> fs/jbd2/recovery.c:301: warning: comparison is always true due to
> limited range of data type
>
Noticed all warnings are occurs when the debug level is 0. Then found
the "jbd2: Move jbd2-debug file to debugfs" patch
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0f49d5d019afa4e94253bfc92f0daca3badb990b
changed the jbd2_journal_enable_debug from int type to u8, makes the
jbd_debug comparision is always true when the debugging level is 0. Thus
the compile warning occurs.
Thought about changing the jbd2_journal_enable_debug data type back to
int, but can't, because the jbd2-debug is moved to debug fs, where
calling debugfs_create_u8() to create the debugfs entry needs the value
to be u8 type.
Even if we changed the data type back to int, the code is still buggy,
kernel should not print jbd2 debug message if the
jbd2_journal_enable_debug is set to 0. But this is not the case.
The fix is change the level of debugging to 1. The same should fixed in
ext3/JBD, but currently ext3 jbd-debug via /proc fs is broken, so we
probably should fix it all together.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Theodore Tso <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The jbd2-debug file used to be located in /proc/sys/fs/jbd2-debug, but it
incorrectly used create_proc_entry() instead of the sysctl routines, and
no proc entry was ever created.
Instead of fixing this we might as well move the jbd2-debug file to
debugfs which would be the preferred location for this kind of tunable.
The new location is now /sys/kernel/debug/jbd2/jbd2-debug.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
When the JBD code was forked to create the new JBD2 code base, the
references to CONFIG_JBD_DEBUG where never changed to
CONFIG_JBD2_DEBUG. This patch fixes that.
Signed-off-by: Jose R. Santos <jrs@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Replace (n & (n-1)) in the context of power of 2 checks with
is_power_of_2().
Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have to check that also the second checkpoint list is non-empty before
dropping the transaction.
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many files include the filename at the beginning, serveral used a wrong one.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
If the thread failed to create the subsequent wait_event will hang forever.
This is likely to happen if kernel hits max_threads limit.
Will be critical for virtualization systems that limit the number of tasks
and kernel memory usage within the container.
(akpm: JBD should be converted fully to the kthread API: kthread_should_stop()
and kthread_stop()).
Cc: <linux-ext4@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove includes of <linux/smp_lock.h> where it is not used/needed.
Suggested by Al Viro.
Builds cleanly on x86_64, i386, alpha, ia64, powerpc, sparc,
sparc64, and arm (all 59 defconfigs).
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current jbd code, if a buffer on BJ_SyncData list is dirty and not
locked, the buffer is refiled to BJ_Locked list, submitted to the IO and
waited for IO completion.
But the fsstress test showed the case that when a buffer was already
submitted to the IO just before the buffer_dirty(bh) check, the buffer was
not waited for IO completion.
Following patch solves this problem. If it is assumed that a buffer is
submitted to the IO before the buffer_dirty(bh) check and still being
written to disk, this buffer is refiled to BJ_Locked list.
Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Jan Kara <jack@ucw.cz>
Cc: "Stephen C. Tweedie" <sct@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.
[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Replace all uses of kmem_cache_t with struct kmem_cache.
The patch was generated using the following script:
#!/bin/sh
#
# Replace one string by another in all the kernel sources.
#
set -e
for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do
quilt add $file
sed -e "1,\$s/$1/$2/g" $file >/tmp/$$
mv /tmp/$$ $file
quilt refresh
done
The script was run like this
sh replace kmem_cache_t "struct kmem_cache"
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
When running several fsx's and other filesystem stress tests, we found
cases where an unmapped buffer was still being sent to submit_bh by the
ext3 dirty data journaling code.
I saw this happen in two ways, both related to another thread doing a
truncate which would unmap the buffer in question.
Either we would get into journal_dirty_data with a bh which was already
unmapped (although journal_dirty_data_fn had checked for this earlier, the
state was not locked at that point), or it would get unmapped in the middle
of journal_dirty_data when we dropped locks to call sync_dirty_buffer.
By re-checking for mapped state after we've acquired the bh state lock, we
should avoid these races. If we find a buffer which is no longer mapped,
we essentially ignore it, because journal_unmap_buffer has already decided
that this buffer can go away.
I've also added tracepoints in these two cases, and made a couple other
tracepoint changes that I found useful in debugging this.
Signed-off-by: Eric Sandeen <esandeen@redhat.com>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
A disk generated some I/O error, after it, I hitted
J_ASSERT(transaction->t_updates > 0) in journal_stop().
It seems to happened on ext3_truncate() path from stack trace. Then,
maybe the following case may trigger J_ASSERT(transaction->t_updates > 0).
ext3_truncate()
-> ext3_free_branches()
-> ext3_journal_test_restart()
-> ext3_journal_restart()
-> journal_restart()
transaction->t_updates--;
/* another process aborted journal */
-> start_this_handle()
returns -EROFS without transaction->t_updates++;
-> ext3_journal_stop()
-> journal_stop()
J_ASSERT(transaction->t_updates > 0)
If journal was aborted in middle of journal_restart(), ext3_truncate()
may trigger J_ASSERT().
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is Eric Sesterhenn's jbd patch applied to jbd2.
Commit: 41716c7c21
His words:
Since commit d1807793e1 we dereference a NULL
pointer. Coverity id #1432. We set journal to NULL, and use it directly
afterwards.
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Cc: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Similar to ext4, change blocks in JBD2 from sector_t to unsigned long long.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
JBD layer in-kernel block varibles type fixes to support >32 bit block number
and convert to sector_t type.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Here is the patch to JBD to handle 64 bit block numbers, originally from Zach
Brown. This patch is useful only after adding support for 64-bit block
numbers in the filesystem.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
jbd and jbd2 currently use the same slab names which must be unique. The
patch below just renames jbd2's slabs.
Signed-off-by: Johann Lombardi <johann.lombardi@bull.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao originally did this work, and Shaggy reproduced it using some
scripts from her.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This is a simple copy of the files in fs/jbd to fs/jbd2 and
/usr/incude/linux/[ext4_]jbd.h to /usr/include/[ext4_]jbd2.h
Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Artem Bityutskiy