This patch cleans up parameters on IO paths.
The key idea is to use f2fs_io_info adding a parameter, block address, and then
use this structure as parameters.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If an inode has converted inline_data which was written to the disk, we should
set its inode flag for further fsync so that this inline_data can be recovered
from sudden power off.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The locked page should be released before returning the function.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If i_size becomes large outside of MAX_INLINE_DATA, we shoud convert the inode.
Otherwise, we can make some dirty pages during the truncation, and those pages
will be written through f2fs_write_data_page.
At that moment, the inode has still inline_data, so that it tries to write non-
zero pages into inline_data area.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The # of inline_data inode is decreased only when it has inline_data.
After clearing the flag, we can't decreased the number.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch simplifies the inline_data usage with the following rule.
1. inline_data is set during the file creation.
2. If new data is requested to be written ranges out of inline_data,
f2fs converts that inode permanently.
3. There is no cases which converts non-inline_data inode to inline_data.
4. The inline_data flag should be changed under inode page lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch declares f2fs_convert_inline_dir as a static function, which was
reported by kbuild test robot.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces f2fs_dentry_ptr structure for the use of a function
parameter in inline_dentry operations.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a core function, f2fs_fill_dentries, to remove
redundant code in f2fs_readdir and f2fs_read_inline_dir.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, init_inode_metadata does not hold any parent directory's inode
page. So, f2fs_init_acl can grab its parent inode page without any problem.
But, when we use inline_dentry, that page is grabbed during f2fs_add_link,
so that we can fall into deadlock condition like below.
INFO: task mknod:11006 blocked for more than 120 seconds.
Tainted: G OE 3.17.0-rc1+ #13
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
mknod D ffff88003fc94580 0 11006 11004 0x00000000
ffff880007717b10 0000000000000002 ffff88003c323220 ffff880007717fd8
0000000000014580 0000000000014580 ffff88003daecb30 ffff88003c323220
ffff88003fc94e80 ffff88003ffbb4e8 ffff880007717ba0 0000000000000002
Call Trace:
[<ffffffff8173dc40>] ? bit_wait+0x50/0x50
[<ffffffff8173d4cd>] io_schedule+0x9d/0x130
[<ffffffff8173dc6c>] bit_wait_io+0x2c/0x50
[<ffffffff8173da3b>] __wait_on_bit_lock+0x4b/0xb0
[<ffffffff811640a7>] __lock_page+0x67/0x70
[<ffffffff810acf50>] ? autoremove_wake_function+0x40/0x40
[<ffffffff811652cc>] pagecache_get_page+0x14c/0x1e0
[<ffffffffa029afa9>] get_node_page+0x59/0x130 [f2fs]
[<ffffffffa02a63ad>] read_all_xattrs+0x24d/0x430 [f2fs]
[<ffffffffa02a6ca2>] f2fs_getxattr+0x52/0xe0 [f2fs]
[<ffffffffa02a7481>] f2fs_get_acl+0x41/0x2d0 [f2fs]
[<ffffffff8122d847>] get_acl+0x47/0x70
[<ffffffff8122db5a>] posix_acl_create+0x5a/0x150
[<ffffffffa02a7759>] f2fs_init_acl+0x29/0xcb [f2fs]
[<ffffffffa0286a8d>] init_inode_metadata+0x5d/0x340 [f2fs]
[<ffffffffa029253a>] f2fs_add_inline_entry+0x12a/0x2e0 [f2fs]
[<ffffffffa0286ea5>] __f2fs_add_link+0x45/0x4a0 [f2fs]
[<ffffffffa028b5b6>] ? f2fs_new_inode+0x146/0x220 [f2fs]
[<ffffffffa028b816>] f2fs_mknod+0x86/0xf0 [f2fs]
[<ffffffff811e3ec1>] vfs_mknod+0xe1/0x160
[<ffffffff811e4b26>] SyS_mknod+0x1f6/0x200
[<ffffffff81741d7f>] tracesys+0xe1/0xe6
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add inline dir functions into normal dir ops' function to handle inline ops.
Besides, we enable inline dir mode when a new dir inode is created if
inline_data option is on.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Adds Functions to implement inline dir init/lookup/insert/delete/convert ops.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
[Jaegeuk Kim: remove needless reserved area copy, pointed by Dan Carpenter]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When trying to write inline_data, we should truncate any data block allocated
and pointed by the inode block.
We should consider the data index is not 0.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a very limited functionality for atomic write support.
In order to support atomic write, this patch adds two ioctls:
o F2FS_IOC_START_ATOMIC_WRITE
o F2FS_IOC_COMMIT_ATOMIC_WRITE
The database engine should be aware of the following sequence.
1. open
-> ioctl(F2FS_IOC_START_ATOMIC_WRITE);
2. writes
: all the written data will be treated as atomic pages.
3. commit
-> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
: this flushes all the data blocks to the disk, which will be shown all or
nothing by f2fs recovery procedure.
4. repeat to #2.
The IO pattens should be:
,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE
CP | D D D D D D | FSYNC | D D D D | FSYNC ...
`- COMMIT_ATOMIC_WRITE
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch checks inline_data one more time under the inode page lock whether
its inline_data is converted or not.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The init_inode_metadata calls truncate_blocks when error is occurred.
The callers holds f2fs_lock_op, so we should not call it again in
truncate_blocks.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a parentheses to make clear for condition check.
And also it changes the return type for better meanings.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If mkwrite is called to an inode having inline_data, it can overwrite the data
index space as NEW_ADDR. (e.g., the first 4 bytes are coincidently zero)
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a inode number list in which represents inodes having
appended data writes or updated data writes after last checkpoint.
This will be used at fsync to determine whether the recovery information
should be written or not.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We don't need to wait on page writeback for these cases.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch splits grab_cache_page_write_begin into grab_cache_page and
wait_on_page_writeback for node pages.
This patch intends to enhance the latency to get node pages by alleviating
unnecessary wait_on_page_writeback.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Previous we do not truncate inline data in inode page when setattr, so following
case could still read the inline data which has already truncated:
1.write inline data
2.ftruncate size to 0
3.ftruncate size to max inline data size
4.read from offset 0
This patch introduces truncate_inline_data() to fix this problem.
change log from v1:
o fix a bug and do not truncate first page data after truncate inline data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
We should unlock page in ->readpage() path and also should unlock & release page
in error path of ->write_begin() to avoid deadlock or memory leak.
So let's add release code to fix the problem when we fail to read inline data.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
"boo sync" parameter is never referenced in f2fs_wait_on_page_writeback.
We should remove this parameter.
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Here is a case which could read inline page data not from first page.
1. write inline data
2. lseek to offset 4096
3. read 4096 bytes from offset 4096
(read_inline_data read inline data page to non-first page,
And previously VFS has add this page to page cache)
4. ftruncate offset 8192
5. read 4096 bytes from offset 4096
(we meet this updated page with inline data in cache)
So we should leave this page with inited data and uptodate flag
for this case.
Change log from v1:
o fix a deadlock bug
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o reduce unneeded memset in __f2fs_convert_inline_data
>From 58796be2bd2becbe8d52305210fb2a64e7dd80b6 Mon Sep 17 00:00:00 2001
From: Chao Yu <chao2.yu@samsung.com>
Date: Mon, 30 Dec 2013 09:21:33 +0800
Subject: [PATCH] f2fs: avoid to left uninitialized data in page when read
inline data
We left uninitialized data in the tail of page when we read an inline data
page. So let's initialize left part of the page excluding inline data region.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
The get_dnode_of_data nullifies inode and node page when error is occurred.
There are two cases that passes inode page into get_dnode_of_data().
1. make_empty_dir()
-> get_new_data_page()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
2. f2fs_convert_inline_data()
-> __f2fs_convert_inline_data()
-> f2fs_reserve_block(ipage)
-> get_dnode_of_data()
This patch adds correct error handling codes when get_dnode_of_data() returns
an error.
At first, f2fs_reserve_block() calls f2fs_put_dnode() whenever reserve_new_block
returns an error.
So, the rule of f2fs_reserve_block() is to nullify inode page when there is any
error internally.
Finally, two callers of f2fs_reserve_block() should call f2fs_put_dnode()
appropriately if they got an error since successful f2fs_reserve_block().
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds a inline_data recovery routine with the following policy.
[prev.] [next] of inline_data flag
o o -> recover inline_data
o x -> remove inline_data, and then recover data blocks
x o -> remove inline_data, and then recover inline_data
x x -> recover data blocks
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This patch adds the number of inline_data files into the status information.
Note that the number is reset whenever the filesystem is newly mounted.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Change log from v1:
o handle NULL pointer of grab_cache_page_write_begin() pointed by Chao Yu.
This patch refactors f2fs_convert_inline_data to check a couple of conditions
internally for deciding whether it needs to convert inline_data or not.
So, the new f2fs_convert_inline_data initially checks:
1) f2fs_has_inline_data(), and
2) the data size to be changed.
If the inode has inline_data but the size to fill is less than MAX_INLINE_DATA,
then we don't need to convert the inline_data with data allocation.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Functions to implement inline data read/write, and move inline data to
normal data block when file size exceeds inline data limitation.
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Haicheng Li <haicheng.li@linux.intel.com>
Signed-off-by: Weihong Xu <weihong.xu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim