e1000e: 82577/82578 PHY register access issues
The MAC-PHY interconnect on 82577/82578 uses a power management feature (called K1) which must be disabled when in 1Gbps due to a hardware issue on these parts. The #define bit setting used to enable/disable K1 is incorrect and can cause PHY register accesses to stop working altogether until the next device reset. This patch sets the register correctly. This issue is present in kernels since 2.6.32. CC: stable@kernel.org Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
5447080cfa
commit
ff847ac2d3
|
@ -308,7 +308,7 @@ enum e1e_registers {
|
|||
#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */
|
||||
#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
|
||||
#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
|
||||
#define E1000_KMRNCTRLSTA_K1_ENABLE 0x140E
|
||||
#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002
|
||||
#define E1000_KMRNCTRLSTA_K1_DISABLE 0x1400
|
||||
|
||||
#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
|
||||
|
|
Loading…
Reference in New Issue