diff --git a/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml new file mode 100644 index 000000000000..0c15afa2214c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/microchip,mpfs.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/microchip,mpfs.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire Clock Control Module Binding + +maintainers: + - Daire McNamara + +description: | + Microchip PolarFire clock control (CLKCFG) is an integrated clock controller, + which gates and enables all peripheral clocks. + + This device tree binding describes 33 gate clocks. Clocks are referenced by + user nodes by the CLKCFG node phandle and the clock index in the group, from + 0 to 32. + +properties: + compatible: + const: microchip,mpfs-clkcfg + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: | + The clock consumer should specify the desired clock by having the clock + ID in its "clocks" phandle cell. See include/dt-bindings/clock/microchip,mpfs-clock.h + for the full list of PolarFire clock IDs. + +required: + - compatible + - reg + - clocks + - '#clock-cells' + +additionalProperties: false + +examples: + # Clock Config node: + - | + #include + soc { + #address-cells = <2>; + #size-cells = <2>; + clkcfg: clock-controller@20002000 { + compatible = "microchip,mpfs-clkcfg"; + reg = <0x0 0x20002000 0x0 0x1000>; + clocks = <&ref>; + #clock-cells = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml new file mode 100644 index 000000000000..110651eafa70 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/microchip,mpfs-gpio.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/microchip,mpfs-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MPFS GPIO Controller Device Tree Bindings + +maintainers: + - Conor Dooley + +properties: + compatible: + items: + - enum: + - microchip,mpfs-gpio + + reg: + maxItems: 1 + + interrupts: + description: + Interrupt mapping, one per GPIO. Maximum 32 GPIOs. + minItems: 1 + maxItems: 32 + + interrupt-controller: true + + clocks: + maxItems: 1 + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 1 + + ngpios: + description: + The number of GPIOs available. + minimum: 1 + maximum: 32 + default: 32 + + gpio-controller: true + +required: + - compatible + - reg + - interrupts + - "#interrupt-cells" + - interrupt-controller + - "#gpio-cells" + - gpio-controller + - clocks + +additionalProperties: false + +examples: + - | + gpio@20122000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x20122000 0x1000>; + clocks = <&clkcfg 25>; + interrupt-parent = <&plic>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + }; +... diff --git a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml similarity index 82% rename from Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml rename to Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml index bbb173ea483c..082d397d3e89 100644 --- a/Documentation/devicetree/bindings/mailbox/microchip,polarfire-soc-mailbox.yaml +++ b/Documentation/devicetree/bindings/mailbox/microchip,mpfs-mailbox.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mailbox/microchip,polarfire-soc-mailbox.yaml#" +$id: "http://devicetree.org/schemas/mailbox/microchip,mpfs-mailbox.yaml#" $schema: "http://devicetree.org/meta-schemas/core.yaml#" title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) mailbox controller @@ -11,7 +11,7 @@ maintainers: properties: compatible: - const: microchip,polarfire-soc-mailbox + const: microchip,mpfs-mailbox reg: items: @@ -38,7 +38,7 @@ examples: #address-cells = <2>; #size-cells = <2>; mbox: mailbox@37020000 { - compatible = "microchip,polarfire-soc-mailbox"; + compatible = "microchip,mpfs-mailbox"; reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318c 0x0 0x40>; interrupt-parent = <&L1>; interrupts = <96>; diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml new file mode 100644 index 000000000000..a7fae1772a81 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml @@ -0,0 +1,81 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip IP corePWM controller bindings + +maintainers: + - Conor Dooley + +description: | + corePWM is an 16 channel pulse width modulator FPGA IP + + https://www.microsemi.com/existing-parts/parts/152118 + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - const: microchip,corepwm-rtl-v4 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#pwm-cells": + const: 2 + + microchip,sync-update-mask: + description: | + Depending on how the IP is instantiated, there are two modes of operation. + In synchronous mode, all channels are updated at the beginning of the PWM period, + and in asynchronous mode updates happen as the control registers are written. + A 16 bit wide "SHADOW_REG_EN" parameter of the IP core controls whether synchronous + mode is possible for each channel, and is set by the bitstream programmed to the + FPGA. If the IP core is instantiated with SHADOW_REG_ENx=1, both registers that + control the duty cycle for channel x have a second "shadow"/buffer reg synthesised. + At runtime a bit wide register exposed to APB can be used to toggle on/off + synchronised mode for all channels it has been synthesised for. + Each bit of "microchip,sync-update-mask" corresponds to a PWM channel & represents + whether synchronous mode is possible for the PWM channel. + + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + microchip,dac-mode-mask: + description: | + Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates + a minimum period pulse train whose High/Low average is that of the chosen duty + cycle. This "DAC" will have far better bandwidth and ripple performance than the + standard PWM algorithm can achieve. A 16 bit DAC_MODE module parameter of the IP + core, set at instantiation and by the bitstream programmed to the FPGA, determines + whether a given channel operates in regular PWM or DAC mode. + Each bit corresponds to a PWM channel & represents whether DAC mode is enabled + for that channel. + + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm@41000000 { + compatible = "microchip,corepwm-rtl-v4"; + microchip,sync-update-mask = /bits/ 32 <0>; + clocks = <&clkcfg 30>; + reg = <0x41000000 0xF0>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml new file mode 100644 index 000000000000..a2e984ea3553 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/microchip,mfps-rtc.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/microchip,mfps-rtc.yaml# + +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire Soc (MPFS) RTC Device Tree Bindings + +allOf: + - $ref: rtc.yaml# + +maintainers: + - Daire McNamara + - Lewis Hanly + +properties: + compatible: + enum: + - microchip,mpfs-rtc + + reg: + maxItems: 1 + + interrupts: + items: + - description: | + RTC_WAKEUP interrupt + - description: | + RTC_MATCH, asserted when the content of the Alarm register is equal + to that of the RTC's count register. + + clocks: + maxItems: 1 + + clock-names: + items: + - const: rtc + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + rtc@20124000 { + compatible = "microchip,mpfs-rtc"; + reg = <0x20124000 0x1000>; + clocks = <&clkcfg 21>; + clock-names = "rtc"; + interrupts = <80>, <81>; + }; +... diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml new file mode 100644 index 000000000000..b0dae51e1d42 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/microchip,mpfs-sys-controller.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/microchip/microchip,mpfs-sys-controller.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller + +maintainers: + - Conor Dooley + +description: | + PolarFire SoC devices include a microcontroller acting as the system controller, + which provides "services" to the main processor and to the FPGA fabric. These + services include hardware rng, reprogramming of the FPGA and verfification of the + eNVM contents etc. More information on these services can be found online, at + https://onlinedocs.microchip.com/pr/GUID-1409CF11-8EF9-4C24-A94E-70979A688632-en-US-1/index.html + + Communication with the system controller is done via a mailbox, of which the client + portion is documented here. + +properties: + mboxes: + maxItems: 1 + + compatible: + const: microchip,mpfs-sys-controller + +required: + - compatible + - mboxes + +additionalProperties: false + +examples: + - | + syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; diff --git a/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml b/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml deleted file mode 100644 index 2cd3bc6bd8d6..000000000000 --- a/Documentation/devicetree/bindings/soc/microchip/microchip,polarfire-soc-sys-controller.yaml +++ /dev/null @@ -1,35 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: "http://devicetree.org/schemas/soc/microchip/microchip,polarfire-soc-sys-controller.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" - -title: Microchip PolarFire SoC (MPFS) MSS (microprocessor subsystem) system controller - -maintainers: - - Conor Dooley - -description: | - The PolarFire SoC system controller is communicated with via a mailbox. - This document describes the bindings for the client portion of that mailbox. - - -properties: - mboxes: - maxItems: 1 - - compatible: - const: microchip,polarfire-soc-sys-controller - -required: - - compatible - - mboxes - -additionalProperties: false - -examples: - - | - syscontroller: syscontroller { - compatible = "microchip,polarfire-soc-sys-controller"; - mboxes = <&mbox 0>; - }; diff --git a/MAINTAINERS b/MAINTAINERS index ea3e6c914384..779a550dc95b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -16575,8 +16575,10 @@ K: riscv RISC-V/MICROCHIP POLARFIRE SOC SUPPORT M: Lewis Hanly +M: Conor Dooley L: linux-riscv@lists.infradead.org S: Supported +F: arch/riscv/boot/dts/microchip/ F: drivers/mailbox/mailbox-mpfs.c F: drivers/soc/microchip/ F: include/soc/microchip/mpfs.h diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi new file mode 100644 index 000000000000..854320e17b28 --- /dev/null +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-fabric.dtsi @@ -0,0 +1,25 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* Copyright (c) 2020-2021 Microchip Technology Inc */ + +/ { + core_pwm0: pwm@41000000 { + compatible = "microchip,corepwm-rtl-v4"; + reg = <0x0 0x41000000 0x0 0xF0>; + microchip,sync-update-mask = /bits/ 32 <0>; + #pwm-cells = <2>; + clocks = <&clkcfg CLK_FIC3>; + status = "disabled"; + }; + + i2c2: i2c@44000000 { + compatible = "microchip,corei2c-rtl-v7"; + reg = <0x0 0x44000000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkcfg CLK_FIC3>; + interrupt-parent = <&plic>; + interrupts = <122>; + clock-frequency = <100000>; + status = "disabled"; + }; +}; diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts index 0c748ae1b006..cd2fe80fa81a 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts @@ -1,5 +1,5 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020 Microchip Technology Inc */ +/* Copyright (c) 2020-2021 Microchip Technology Inc */ /dts-v1/; @@ -13,25 +13,34 @@ compatible = "microchip,mpfs-icicle-kit", "microchip,mpfs"; aliases { - ethernet0 = &emac1; - serial0 = &serial0; - serial1 = &serial1; - serial2 = &serial2; - serial3 = &serial3; + ethernet0 = &mac1; + serial0 = &mmuart0; + serial1 = &mmuart1; + serial2 = &mmuart2; + serial3 = &mmuart3; + serial4 = &mmuart4; }; chosen { - stdout-path = "serial0:115200n8"; + stdout-path = "serial1:115200n8"; }; cpus { timebase-frequency = ; }; - memory@80000000 { + ddrc_cache_lo: memory@80000000 { device_type = "memory"; - reg = <0x0 0x80000000 0x0 0x40000000>; - clocks = <&clkcfg 26>; + reg = <0x0 0x80000000 0x0 0x2e000000>; + clocks = <&clkcfg CLK_DDRC>; + status = "okay"; + }; + + ddrc_cache_hi: memory@1000000000 { + device_type = "memory"; + reg = <0x10 0x0 0x0 0x40000000>; + clocks = <&clkcfg CLK_DDRC>; + status = "okay"; }; }; @@ -39,19 +48,19 @@ clock-frequency = <600000000>; }; -&serial0 { +&mmuart1 { status = "okay"; }; -&serial1 { +&mmuart2 { status = "okay"; }; -&serial2 { +&mmuart3 { status = "okay"; }; -&serial3 { +&mmuart4 { status = "okay"; }; @@ -61,28 +70,92 @@ bus-width = <4>; disable-wp; cap-sd-highspeed; + cap-mmc-highspeed; card-detect-delay = <200>; + mmc-ddr-1_8v; + mmc-hs200-1_8v; sd-uhs-sdr12; sd-uhs-sdr25; sd-uhs-sdr50; sd-uhs-sdr104; }; -&emac0 { - phy-mode = "sgmii"; - phy-handle = <&phy0>; - phy0: ethernet-phy@8 { - reg = <8>; - ti,fifo-depth = <0x01>; - }; +&spi0 { + status = "okay"; }; -&emac1 { +&spi1 { + status = "okay"; +}; + +&qspi { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&mac0 { + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&mac1 { status = "okay"; phy-mode = "sgmii"; phy-handle = <&phy1>; phy1: ethernet-phy@9 { reg = <9>; - ti,fifo-depth = <0x01>; + ti,fifo-depth = <0x1>; + }; + phy0: ethernet-phy@8 { + reg = <8>; + ti,fifo-depth = <0x1>; }; }; + +&gpio2 { + interrupts = <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>, + <53>, <53>, <53>, <53>; + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&usb { + status = "okay"; + dr_mode = "host"; +}; + +&mbox { + status = "okay"; +}; + +&syscontroller { + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&core_pwm0 { + status = "okay"; +}; diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi index 869aaf0d5c06..c5c9d1360de0 100644 --- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi +++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi @@ -1,7 +1,9 @@ // SPDX-License-Identifier: (GPL-2.0 OR MIT) -/* Copyright (c) 2020 Microchip Technology Inc */ +/* Copyright (c) 2020-2021 Microchip Technology Inc */ /dts-v1/; +#include "dt-bindings/clock/microchip,mpfs-clock.h" +#include "microchip-mpfs-fabric.dtsi" / { #address-cells = <2>; @@ -13,8 +15,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu@0 { - clock-frequency = <0>; + cpu0: cpu@0 { compatible = "sifive,e51", "sifive,rocket0", "riscv"; device_type = "cpu"; i-cache-block-size = <64>; @@ -22,6 +23,7 @@ i-cache-size = <16384>; reg = <0>; riscv,isa = "rv64imac"; + clocks = <&clkcfg CLK_CPU>; status = "disabled"; cpu0_intc: interrupt-controller { @@ -31,8 +33,7 @@ }; }; - cpu@1 { - clock-frequency = <0>; + cpu1: cpu@1 { compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; @@ -48,6 +49,7 @@ mmu-type = "riscv,sv39"; reg = <1>; riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; tlb-split; status = "okay"; @@ -58,8 +60,7 @@ }; }; - cpu@2 { - clock-frequency = <0>; + cpu2: cpu@2 { compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; @@ -75,6 +76,7 @@ mmu-type = "riscv,sv39"; reg = <2>; riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; tlb-split; status = "okay"; @@ -85,8 +87,7 @@ }; }; - cpu@3 { - clock-frequency = <0>; + cpu3: cpu@3 { compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; @@ -102,6 +103,7 @@ mmu-type = "riscv,sv39"; reg = <3>; riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; tlb-split; status = "okay"; @@ -112,8 +114,7 @@ }; }; - cpu@4 { - clock-frequency = <0>; + cpu4: cpu@4 { compatible = "sifive,u54-mc", "sifive,rocket0", "riscv"; d-cache-block-size = <64>; d-cache-sets = <64>; @@ -129,6 +130,7 @@ mmu-type = "riscv,sv39"; reg = <4>; riscv,isa = "rv64imafdc"; + clocks = <&clkcfg CLK_CPU>; tlb-split; status = "okay"; cpu4_intc: interrupt-controller { @@ -150,8 +152,9 @@ compatible = "simple-bus"; ranges; - cache-controller@2010000 { + cctrllr: cache-controller@2010000 { compatible = "sifive,fu540-c000-ccache", "cache"; + reg = <0x0 0x2010000 0x0 0x1000>; cache-block-size = <64>; cache-level = <2>; cache-sets = <1024>; @@ -159,10 +162,9 @@ cache-unified; interrupt-parent = <&plic>; interrupts = <1>, <2>, <3>; - reg = <0x0 0x2010000 0x0 0x1000>; }; - clint@2000000 { + clint: clint@2000000 { compatible = "sifive,fu540-c000-clint", "sifive,clint0"; reg = <0x0 0x2000000 0x0 0xC000>; interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>, @@ -186,15 +188,6 @@ riscv,ndev = <186>; }; - dma@3000000 { - compatible = "sifive,fu540-c000-pdma"; - reg = <0x0 0x3000000 0x0 0x8000>; - interrupt-parent = <&plic>; - interrupts = <23>, <24>, <25>, <26>, <27>, <28>, <29>, - <30>; - #dma-cells = <1>; - }; - clkcfg: clkcfg@20002000 { compatible = "microchip,mpfs-clkcfg"; reg = <0x0 0x20002000 0x0 0x1000>; @@ -202,7 +195,7 @@ #clock-cells = <1>; }; - serial0: serial@20000000 { + mmuart0: serial@20000000 { compatible = "ns16550a"; reg = <0x0 0x20000000 0x0 0x400>; reg-io-width = <4>; @@ -210,11 +203,11 @@ interrupt-parent = <&plic>; interrupts = <90>; current-speed = <115200>; - clocks = <&clkcfg 8>; - status = "disabled"; + clocks = <&clkcfg CLK_MMUART0>; + status = "disabled"; /* Reserved for the HSS */ }; - serial1: serial@20100000 { + mmuart1: serial@20100000 { compatible = "ns16550a"; reg = <0x0 0x20100000 0x0 0x400>; reg-io-width = <4>; @@ -222,11 +215,11 @@ interrupt-parent = <&plic>; interrupts = <91>; current-speed = <115200>; - clocks = <&clkcfg 9>; + clocks = <&clkcfg CLK_MMUART1>; status = "disabled"; }; - serial2: serial@20102000 { + mmuart2: serial@20102000 { compatible = "ns16550a"; reg = <0x0 0x20102000 0x0 0x400>; reg-io-width = <4>; @@ -234,11 +227,11 @@ interrupt-parent = <&plic>; interrupts = <92>; current-speed = <115200>; - clocks = <&clkcfg 10>; + clocks = <&clkcfg CLK_MMUART2>; status = "disabled"; }; - serial3: serial@20104000 { + mmuart3: serial@20104000 { compatible = "ns16550a"; reg = <0x0 0x20104000 0x0 0x400>; reg-io-width = <4>; @@ -246,7 +239,19 @@ interrupt-parent = <&plic>; interrupts = <93>; current-speed = <115200>; - clocks = <&clkcfg 11>; + clocks = <&clkcfg CLK_MMUART3>; + status = "disabled"; + }; + + mmuart4: serial@20106000 { + compatible = "ns16550a"; + reg = <0x0 0x20106000 0x0 0x400>; + reg-io-width = <4>; + reg-shift = <2>; + interrupt-parent = <&plic>; + interrupts = <94>; + clocks = <&clkcfg CLK_MMUART4>; + current-speed = <115200>; status = "disabled"; }; @@ -255,37 +260,196 @@ compatible = "microchip,mpfs-sd4hc", "cdns,sd4hc"; reg = <0x0 0x20008000 0x0 0x1000>; interrupt-parent = <&plic>; - interrupts = <88>, <89>; - clocks = <&clkcfg 6>; + interrupts = <88>; + clocks = <&clkcfg CLK_MMC>; max-frequency = <200000000>; status = "disabled"; }; - emac0: ethernet@20110000 { + spi0: spi@20108000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20108000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <54>; + clocks = <&clkcfg CLK_SPI0>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + spi1: spi@20109000 { + compatible = "microchip,mpfs-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20109000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <55>; + clocks = <&clkcfg CLK_SPI1>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + qspi: spi@21000000 { + compatible = "microchip,mpfs-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21000000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <85>; + clocks = <&clkcfg CLK_QSPI>; + spi-max-frequency = <25000000>; + status = "disabled"; + }; + + i2c0: i2c@2010a000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010a000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <58>; + clocks = <&clkcfg CLK_I2C0>; + clock-frequency = <100000>; + status = "disabled"; + }; + + i2c1: i2c@2010b000 { + compatible = "microchip,mpfs-i2c", "microchip,corei2c-rtl-v7"; + reg = <0x0 0x2010b000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <61>; + clocks = <&clkcfg CLK_I2C1>; + clock-frequency = <100000>; + status = "disabled"; + }; + + mac0: ethernet@20110000 { compatible = "cdns,macb"; reg = <0x0 0x20110000 0x0 0x2000>; - interrupt-parent = <&plic>; - interrupts = <64>, <65>, <66>, <67>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg 4>, <&clkcfg 2>; - clock-names = "pclk", "hclk"; - status = "disabled"; #address-cells = <1>; #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <64>, <65>, <66>, <67>, <68>, <69>; + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC0>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + status = "disabled"; }; - emac1: ethernet@20112000 { + mac1: ethernet@20112000 { compatible = "cdns,macb"; reg = <0x0 0x20112000 0x0 0x2000>; - interrupt-parent = <&plic>; - interrupts = <70>, <71>, <72>, <73>; - local-mac-address = [00 00 00 00 00 00]; - clocks = <&clkcfg 5>, <&clkcfg 2>; - status = "disabled"; - clock-names = "pclk", "hclk"; #address-cells = <1>; #size-cells = <0>; + interrupt-parent = <&plic>; + interrupts = <70>, <71>, <72>, <73>, <74>, <75>; + local-mac-address = [00 00 00 00 00 00]; + clocks = <&clkcfg CLK_MAC1>, <&clkcfg CLK_AHB>; + clock-names = "pclk", "hclk"; + status = "disabled"; }; + gpio0: gpio@20120000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20120000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO0>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio1: gpio@20121000 { + compatible = "microchip,mpfs-gpio"; + reg = <000 0x20121000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO1>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + gpio2: gpio@20122000 { + compatible = "microchip,mpfs-gpio"; + reg = <0x0 0x20122000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupt-controller; + #interrupt-cells = <1>; + clocks = <&clkcfg CLK_GPIO2>; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + rtc: rtc@20124000 { + compatible = "microchip,mpfs-rtc"; + reg = <0x0 0x20124000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <80>, <81>; + clocks = <&clkcfg CLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + usb: usb@20201000 { + compatible = "microchip,mpfs-musb"; + reg = <0x0 0x20201000 0x0 0x1000>; + interrupt-parent = <&plic>; + interrupts = <86>, <87>; + clocks = <&clkcfg CLK_USB>; + interrupt-names = "dma","mc"; + status = "disabled"; + }; + + pcie: pcie@2000000000 { + compatible = "microchip,pcie-host-1.0"; + #address-cells = <0x3>; + #interrupt-cells = <0x1>; + #size-cells = <0x2>; + device_type = "pci"; + reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>; + reg-names = "cfg", "apb"; + bus-range = <0x0 0x7f>; + interrupt-parent = <&plic>; + interrupts = <119>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + interrupt-map-mask = <0 0 0 7>; + clocks = <&clkcfg CLK_FIC0>, <&clkcfg CLK_FIC1>, <&clkcfg CLK_FIC3>; + clock-names = "fic0", "fic1", "fic3"; + ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>; + msi-parent = <&pcie>; + msi-controller; + microchip,axi-m-atr0 = <0x10 0x0>; + status = "disabled"; + pcie_intc: legacy-interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + + mbox: mailbox@37020000 { + compatible = "microchip,mpfs-mailbox"; + reg = <0x0 0x37020000 0x0 0x1000>, <0x0 0x2000318C 0x0 0x40>; + interrupt-parent = <&plic>; + interrupts = <96>; + #mbox-cells = <1>; + status = "disabled"; + }; + + syscontroller: syscontroller { + compatible = "microchip,mpfs-sys-controller"; + mboxes = <&mbox 0>; + }; }; }; diff --git a/include/dt-bindings/clock/microchip,mpfs-clock.h b/include/dt-bindings/clock/microchip,mpfs-clock.h new file mode 100644 index 000000000000..73f2a9324857 --- /dev/null +++ b/include/dt-bindings/clock/microchip,mpfs-clock.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Daire McNamara, + * Copyright (C) 2020 Microchip Technology Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ +#define _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ + +#define CLK_CPU 0 +#define CLK_AXI 1 +#define CLK_AHB 2 + +#define CLK_ENVM 3 +#define CLK_MAC0 4 +#define CLK_MAC1 5 +#define CLK_MMC 6 +#define CLK_TIMER 7 +#define CLK_MMUART0 8 +#define CLK_MMUART1 9 +#define CLK_MMUART2 10 +#define CLK_MMUART3 11 +#define CLK_MMUART4 12 +#define CLK_SPI0 13 +#define CLK_SPI1 14 +#define CLK_I2C0 15 +#define CLK_I2C1 16 +#define CLK_CAN0 17 +#define CLK_CAN1 18 +#define CLK_USB 19 +#define CLK_RESERVED 20 +#define CLK_RTC 21 +#define CLK_QSPI 22 +#define CLK_GPIO0 23 +#define CLK_GPIO1 24 +#define CLK_GPIO2 25 +#define CLK_DDRC 26 +#define CLK_FIC0 27 +#define CLK_FIC1 28 +#define CLK_FIC2 29 +#define CLK_FIC3 30 +#define CLK_ATHENA 31 +#define CLK_CFM 32 + +#endif /* _DT_BINDINGS_CLK_MICROCHIP_MPFS_H_ */