Second Round of Renesas ARM64 Based SoC DT Updates for v4.14

* Add PFC device node to R-Car D3 (r8a77995)
 
   This is a step towards enabling devices that use multiplexed pins
   - including ethernet - on boards that use the r8a7796 SoC.
 
 * Add USB nodes to R-Car M3-W (r8a7796)
 
   This is a step towards enabling USB devices on boards that
   use the r8a7796 SoC.
 
 * Use newly added Gen-3 fallback compat string
 
   This is consistent with ongoing efforts to use per-generation
   fallback strings where appropriate across devices found
   on R-Car SoCs. The aim of the effort being to strike a balance
   between the limited information available about the compatibility
   of devices found on different SoCs and the desire to ease enabling
   devices on new SoCs.
 
   This has no run-time effect due to the presence of a per-SoC
   compat string.
 
 * Cleanup whitespace and extra LVDS port label
 
   Minor cleanups, no run-time effect.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZlV36AAoJENfPZGlqN0++cwMQAIieFfQzDET0/2dGSWB6oDAt
 fSCCHh4l6B5vufUyhV4rDjm8drKgT5sMTkAYh4Y1oq69NV3BFnFb0gr3BY58Qwyv
 yz4s2o3UNShVcCuSK8rJaMdr8BOBmKoS2WBMjIOBO+znfhfP1zCbBgDNIanSGMY2
 8fmBBB3CF76NM0Juh5FmD1bUsxvzX3ZboyWxQY9u5aIrvcvhau4dcifkKJpcp5gT
 b/0z0Vi2ZraPE1JOlIHghc0ph10TYVl1pYINgWhhtybNSd9D2TXgGFfn5XZkdk2+
 +Az+mookjAsXIm7hj/3la1KflnT67oWNb6rJkz3TWHkNSFW0AbZb0iEnzP02mIMX
 6DsUW8jaAxxviMavLB8+Qi5UMM4q7PY78AWB4VA4etkQf5GL/98Lr/jLayd4vyOt
 tJLeE+c89J+eEbql4UfrTl/fdUIjJzH5P9RMG/DUpqAZpw8GlFjx5ZttPKOMUU7V
 dN5wuG+ujneedn6Kb0RHeI09/q4MVPcEjxbOGq/Xqljp1wYPf44tkDkBd9ecs047
 A9fXEuv3qgU5N8iNyT31nudzNbDTIfDYFg7XBcX5pY7BAnXKbTvfl1mFzHyX9Pm8
 GBGFndOrX4b9aPj3JqXMldQOVpKT5YMyFbA2vl4Z1bbqFqE3cdgHSEp5NcC93qRv
 1colO4fJ/JaDLKsP5dfH
 =6XqO
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.14" from Simon Horman:

* Add PFC device node to R-Car D3 (r8a77995)

  This is a step towards enabling devices that use multiplexed pins
  - including ethernet - on boards that use the r8a7796 SoC.

* Add USB nodes to R-Car M3-W (r8a7796)

  This is a step towards enabling USB devices on boards that
  use the r8a7796 SoC.

* Use newly added Gen-3 fallback compat string

  This is consistent with ongoing efforts to use per-generation
  fallback strings where appropriate across devices found
  on R-Car SoCs. The aim of the effort being to strike a balance
  between the limited information available about the compatibility
  of devices found on different SoCs and the desire to ease enabling
  devices on new SoCs.

  This has no run-time effect due to the presence of a per-SoC
  compat string.

* Cleanup whitespace and extra LVDS port label

  Minor cleanups, no run-time effect.

* tag 'renesas-arm64-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: r8a77995: add pfc device node
  arm64: dts: r8a7796: Add HSUSB device node
  arm64: dts: r8a7796: Add USB-DMAC device nodes
  arm64: dts: r8a7796: Add USB3.0 host device node
  arm64: dts: r8a7796: add USB2.0 Host (EHCI/OHCI) device nodes
  arm64: dts: r8a7796: add usb2_phy device nodes
  arm64: dts: r8a7795: correct whitespace of companion property
  arm64: dts: r8a7795: Use R-Car SATA Gen3 fallback compat string
  arm64: dts: salvator-common: Remove extra LVDS port label
This commit is contained in:
Arnd Bergmann 2017-08-18 23:14:15 +02:00
commit fc9cc2797a
4 changed files with 116 additions and 17 deletions

View File

@ -1451,7 +1451,8 @@
};
sata: sata@ee300000 {
compatible = "renesas,sata-r8a7795";
compatible = "renesas,sata-r8a7795",
"renesas,rcar-gen3-sata";
reg = <0 0xee300000 0 0x200000>;
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 815>;
@ -1623,7 +1624,7 @@
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion= <&ohci0>;
companion = <&ohci0>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
@ -1636,7 +1637,7 @@
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
companion= <&ohci1>;
companion = <&ohci1>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
@ -1649,7 +1650,7 @@
clocks = <&cpg CPG_MOD 701>;
phys = <&usb2_phy2>;
phy-names = "usb";
companion= <&ohci2>;
companion = <&ohci2>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 701>;
status = "disabled";
@ -1662,7 +1663,7 @@
clocks = <&cpg CPG_MOD 700>;
phys = <&usb2_phy3>;
phy-names = "usb";
companion= <&ohci3>;
companion = <&ohci3>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 700>;
status = "disabled";

View File

@ -1223,36 +1223,133 @@
dma-channels = <16>;
};
usb_dmac0: dma-controller@e65a0000 {
compatible = "renesas,r8a7796-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65a0000 0 0x100>;
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 330>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 330>;
#dma-cells = <1>;
dma-channels = <2>;
};
usb_dmac1: dma-controller@e65b0000 {
compatible = "renesas,r8a7796-usb-dmac",
"renesas,usb-dmac";
reg = <0 0xe65b0000 0 0x100>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH
GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "ch0", "ch1";
clocks = <&cpg CPG_MOD 331>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 331>;
#dma-cells = <1>;
dma-channels = <2>;
};
hsusb: usb@e6590000 {
/* placeholder */
compatible = "renesas,usbhs-r8a7796",
"renesas,rcar-gen3-usbhs";
reg = <0 0xe6590000 0 0x100>;
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 704>;
dmas = <&usb_dmac0 0>, <&usb_dmac0 1>,
<&usb_dmac1 0>, <&usb_dmac1 1>;
dma-names = "ch0", "ch1", "ch2", "ch3";
renesas,buswait = <11>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 704>;
status = "disabled";
};
xhci0: usb@ee000000 {
/* placeholder */
compatible = "renesas,xhci-r8a7796",
"renesas,rcar-gen3-xhci";
reg = <0 0xee000000 0 0xc00>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 328>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 328>;
status = "disabled";
};
ohci0: usb@ee080000 {
/* placeholder */
compatible = "generic-ohci";
reg = <0 0xee080000 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
};
ehci0: usb@ee080100 {
/* placeholder */
compatible = "generic-ehci";
reg = <0 0xee080100 0 0x100>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
phys = <&usb2_phy0>;
phy-names = "usb";
companion= <&ohci0>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 703>;
status = "disabled";
};
usb2_phy0: usb-phy@ee080200 {
/* placeholder */
compatible = "renesas,usb2-phy-r8a7796",
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 703>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 703>;
#phy-cells = <0>;
status = "disabled";
};
ohci1: usb@ee0a0000 {
/* placeholder */
compatible = "generic-ohci";
reg = <0 0xee0a0000 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
};
ehci1: usb@ee0a0100 {
/* placeholder */
compatible = "generic-ehci";
reg = <0 0xee0a0100 0 0x100>;
interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 702>;
phys = <&usb2_phy1>;
phy-names = "usb";
companion= <&ohci1>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>;
status = "disabled";
};
usb2_phy1: usb-phy@ee0a0200 {
/* placeholder */
compatible = "renesas,usb2-phy-r8a7796",
"renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
clocks = <&cpg CPG_MOD 702>;
power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
resets = <&cpg 702>;
#phy-cells = <0>;
status = "disabled";
};
sdhi0: sd@ee100000 {

View File

@ -122,6 +122,11 @@
reg = <0 0xe6160000 0 0x0200>;
};
pfc: pfc@e6060000 {
compatible = "renesas,pfc-r8a77995";
reg = <0 0xe6060000 0 0x508>;
};
prr: chipid@fff00044 {
compatible = "renesas,prr";
reg = <0 0xfff00044 0 4>;

View File

@ -268,10 +268,6 @@
remote-endpoint = <&adv7123_in>;
};
};
port@3 {
lvds_connector: endpoint {
};
};
};
};