USB: EHCI big endian data structures support (for 440EPx)

This patch adds support for the AMCC 440EPx EHCI controller whose
in-memory data structures and the registers are represented in big-
endian format.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/ehci-hcd.c

@@ -1009,6 +1009,11 @@ MODULE_LICENSE ("GPL");
 #define	PS3_SYSTEM_BUS_DRIVER	ps3_ehci_sb_driver
 #endif
 
+#ifdef CONFIG_440EPX
+#include "ehci-ppc-soc.c"
+#define	PLATFORM_DRIVER		ehci_ppc_soc_driver
+#endif
+
 #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
     !defined(PS3_SYSTEM_BUS_DRIVER)
 #error "missing bus glue for ehci-hcd"

drivers/usb/host/ehci-ppc-soc.c

@@ -0,0 +1,182 @@
+/*
+ * EHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 2006-2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
+ *
+ * Bus Glue for PPC On-Chip EHCI driver
+ * Tested on AMCC 440EPx
+ *
+ * Based on "ehci-au12xx.c" by David Brownell <dbrownell@users.sourceforge.net>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/platform_device.h>
+
+extern int usb_disabled(void);
+
+/**
+ * usb_ehci_ppc_soc_probe - initialize PPC-SoC-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_ehci_ppc_soc_probe(const struct hc_driver *driver,
+			   struct usb_hcd **hcd_out,
+			   struct platform_device *dev)
+{
+	int retval;
+	struct usb_hcd *hcd;
+	struct ehci_hcd *ehci;
+
+	if (dev->resource[1].flags != IORESOURCE_IRQ) {
+		pr_debug("resource[1] is not IORESOURCE_IRQ");
+		retval = -ENOMEM;
+	}
+	hcd = usb_create_hcd(driver, &dev->dev, "PPC-SOC EHCI");
+	if (!hcd)
+		return -ENOMEM;
+	hcd->rsrc_start = dev->resource[0].start;
+	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
+
+	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+		pr_debug("request_mem_region failed");
+		retval = -EBUSY;
+		goto err1;
+	}
+
+	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+	if (!hcd->regs) {
+		pr_debug("ioremap failed");
+		retval = -ENOMEM;
+		goto err2;
+	}
+
+	ehci = hcd_to_ehci(hcd);
+	ehci->big_endian_mmio = 1;
+	ehci->big_endian_desc = 1;
+	ehci->caps = hcd->regs;
+	ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
+	/* cache this readonly data; minimize chip reads */
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+#if defined(CONFIG_440EPX)
+	/*
+	 * 440EPx Errata USBH_3
+	 * Fix: Enable Break Memory Transfer (BMT) in INSNREG3
+	 */
+	out_be32((void *)((ulong)(&ehci->regs->command) + 0x8c), (1 << 0));
+	ehci_dbg(ehci, "Break Memory Transfer (BMT) has beed enabled!\n");
+#endif
+
+	retval = usb_add_hcd(hcd, dev->resource[1].start, IRQF_DISABLED);
+	if (retval == 0)
+		return retval;
+
+	iounmap(hcd->regs);
+err2:
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err1:
+	usb_put_hcd(hcd);
+	return retval;
+}
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_ehci_hcd_ppc_soc_remove - shutdown processing for PPC-SoC-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_ehci_hcd_ppc_soc_probe(), first invoking
+ * the HCD's stop() method.  It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ */
+void usb_ehci_ppc_soc_remove(struct usb_hcd *hcd, struct platform_device *dev)
+{
+	usb_remove_hcd(hcd);
+	iounmap(hcd->regs);
+	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+	usb_put_hcd(hcd);
+}
+
+static const struct hc_driver ehci_ppc_soc_hc_driver = {
+	.description = hcd_name,
+	.product_desc = "PPC-SOC EHCI",
+	.hcd_priv_size = sizeof(struct ehci_hcd),
+
+	/*
+	 * generic hardware linkage
+	 */
+	.irq = ehci_irq,
+	.flags = HCD_MEMORY | HCD_USB2,
+
+	/*
+	 * basic lifecycle operations
+	 */
+	.reset = ehci_init,
+	.start = ehci_run,
+	.stop = ehci_stop,
+	.shutdown = ehci_shutdown,
+
+	/*
+	 * managing i/o requests and associated device resources
+	 */
+	.urb_enqueue = ehci_urb_enqueue,
+	.urb_dequeue = ehci_urb_dequeue,
+	.endpoint_disable = ehci_endpoint_disable,
+
+	/*
+	 * scheduling support
+	 */
+	.get_frame_number = ehci_get_frame,
+
+	/*
+	 * root hub support
+	 */
+	.hub_status_data = ehci_hub_status_data,
+	.hub_control = ehci_hub_control,
+#ifdef	CONFIG_PM
+	.hub_suspend = ehci_hub_suspend,
+	.hub_resume = ehci_hub_resume,
+#endif
+};
+
+static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = NULL;
+	int ret;
+
+	pr_debug("In ehci_hcd_ppc_soc_drv_probe\n");
+
+	if (usb_disabled())
+		return -ENODEV;
+
+	ret = usb_ehci_ppc_soc_probe(&ehci_ppc_soc_hc_driver, &hcd, pdev);
+	return ret;
+}
+
+static int ehci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
+{
+	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+	usb_ehci_ppc_soc_remove(hcd, pdev);
+	return 0;
+}
+
+MODULE_ALIAS("ppc-soc-ehci");
+static struct platform_driver ehci_ppc_soc_driver = {
+	.probe = ehci_hcd_ppc_soc_drv_probe,
+	.remove = ehci_hcd_ppc_soc_drv_remove,
+	.shutdown = usb_hcd_platform_shutdown,
+	.driver = {
+		.name = "ppc-soc-ehci",
+		.bus = &platform_bus_type
+	}
+};