From f5a9f0ca40c74547e28e0cb30973df5577dfbaec Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 30 May 2014 23:49:57 +0300 Subject: [PATCH 01/17] ath10k: remove unnecessary htt rx corruption check While fixing a bug reported by Avery I went ahead and added a warning suspecting there might be something more to the bug. This ended up with people reporting they see warnings during heavy traffic. This bought me some time and helped me understand the problem better - apparently fw/hw can report a chained msdus as follows: 1 msdu, 1 chained, 1 msdu (0 length). The patch removes the extra check but leaves the other change that fixed the original skb_push panic bug (msdu_chaining was overwritten in an unfortunate way which made the above example to be treated as non-chained case). Reported-by: Yeoh Chun-Yeow Reported-by: Tim Harvey Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/htt_rx.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 6c102b1312ff..eebc860c3655 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -312,7 +312,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt, int msdu_len, msdu_chaining = 0; struct sk_buff *msdu; struct htt_rx_desc *rx_desc; - bool corrupted = false; lockdep_assert_held(&htt->rx_ring.lock); @@ -439,9 +438,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt, last_msdu = __le32_to_cpu(rx_desc->msdu_end.info0) & RX_MSDU_END_INFO0_LAST_MSDU; - if (msdu_chaining && !last_msdu) - corrupted = true; - if (last_msdu) { msdu->next = NULL; break; @@ -456,20 +452,6 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt, if (*head_msdu == NULL) msdu_chaining = -1; - /* - * Apparently FW sometimes reports weird chained MSDU sequences with - * more than one rx descriptor. This seems like a bug but needs more - * analyzing. For the time being fix it by dropping such sequences to - * avoid blowing up the host system. - */ - if (corrupted) { - ath10k_warn("failed to pop chained msdus, dropping\n"); - ath10k_htt_rx_free_msdu_chain(*head_msdu); - *head_msdu = NULL; - *tail_msdu = NULL; - msdu_chaining = -EINVAL; - } - /* * Don't refill the ring yet. * From dfa413de1e4388818f7dcdce0a90d6212e74895b Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Mon, 2 Jun 2014 21:19:45 +0300 Subject: [PATCH 02/17] ath10k: fix 8th virtual AP interface with DFS Firmware 10.x supports up to 8 virtual AP interfaces, but in a DFS channel it was possible to create only 7 interfaces as ath10k internal creates a monitor interface for DFS. Previous vdev map initialization was missing enough space for 8 + 1 vdevs due to wrong define used and that's why there was no space for 8th interface. Use the correct define TARGET_10X_NUM_VDEVS with 10.x firmware to make it possible to create the 8th virtual interface. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 82017f56e661..e6c56c5bb0f6 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -795,7 +795,11 @@ int ath10k_core_start(struct ath10k *ar) if (status) goto err_htc_stop; - ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1; + if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) + ar->free_vdev_map = (1 << TARGET_10X_NUM_VDEVS) - 1; + else + ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1; + INIT_LIST_HEAD(&ar->arvifs); if (!test_bit(ATH10K_FLAG_FIRST_BOOT_DONE, &ar->dev_flags)) From a2b23bacb315d3873ed90029fd2b68c95de734c0 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Fri, 20 Jun 2014 12:34:28 +0200 Subject: [PATCH 03/17] Revert "Bluetooth: Add a new PID/VID 0cf3/e005 for AR3012." This reverts commit ca58e594da2486c1d28e7ad547d82266604ec4ce. For some unclear reason this patch tries to add suport for the product ID 0xe005, but it ends up adding product ID 0x3005 to all the tables. This is obviously wrong and causing multiple issues. The original patch seemed to be fine, but what ended up in 3.15 is not what the patch intended. The commit 0a3658cccdf53 is already present and adds support for this hardware. This means only revert of this broken commit is requird. Signed-off-by: Marcel Holtmann Reported-by: Alexander Holler Cc: stable@vger.kernel.org # 3.15.x --- drivers/bluetooth/ath3k.c | 2 -- drivers/bluetooth/btusb.c | 1 - 2 files changed, 3 deletions(-) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index f98380648cb3..f50dffc0374f 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -90,7 +90,6 @@ static const struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0b05, 0x17d0) }, { USB_DEVICE(0x0CF3, 0x0036) }, { USB_DEVICE(0x0CF3, 0x3004) }, - { USB_DEVICE(0x0CF3, 0x3005) }, { USB_DEVICE(0x0CF3, 0x3008) }, { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x0CF3, 0x311E) }, @@ -140,7 +139,6 @@ static const struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0CF3, 0x0036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, - { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311E), .driver_info = BTUSB_ATH3012 }, diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a1c80b0c7663..6250fc2fb93a 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -162,7 +162,6 @@ static const struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x0036), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 }, - { USB_DEVICE(0x0cf3, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x0cf3, 0x311e), .driver_info = BTUSB_ATH3012 }, From c7262e711ae6e466baeb9ddc21d678c878469b1f Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 17 Jun 2014 13:07:37 +0300 Subject: [PATCH 04/17] Bluetooth: Fix overriding higher security level in SMP When we receive a pairing request or an internal request to start pairing we shouldn't blindly overwrite the existing pending_sec_level value as that may actually be higher than the new one. This patch fixes the SMP code to only overwrite the value in case the new one is higher than the old. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/smp.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index f2829a7932e2..0189ec8b68d1 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -669,7 +669,7 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) { struct smp_cmd_pairing rsp, *req = (void *) skb->data; struct smp_chan *smp; - u8 key_size, auth; + u8 key_size, auth, sec_level; int ret; BT_DBG("conn %p", conn); @@ -695,7 +695,9 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) /* We didn't start the pairing, so match remote */ auth = req->auth_req; - conn->hcon->pending_sec_level = authreq_to_seclevel(auth); + sec_level = authreq_to_seclevel(auth); + if (sec_level > conn->hcon->pending_sec_level) + conn->hcon->pending_sec_level = sec_level; build_pairing_cmd(conn, req, &rsp, auth); @@ -838,6 +840,7 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb) struct smp_cmd_pairing cp; struct hci_conn *hcon = conn->hcon; struct smp_chan *smp; + u8 sec_level; BT_DBG("conn %p", conn); @@ -847,7 +850,9 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb) if (!(conn->hcon->link_mode & HCI_LM_MASTER)) return SMP_CMD_NOTSUPP; - hcon->pending_sec_level = authreq_to_seclevel(rp->auth_req); + sec_level = authreq_to_seclevel(rp->auth_req); + if (sec_level > hcon->pending_sec_level) + hcon->pending_sec_level = sec_level; if (smp_ltk_encrypt(conn, hcon->pending_sec_level)) return 0; @@ -901,9 +906,12 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) if (smp_sufficient_security(hcon, sec_level)) return 1; + if (sec_level > hcon->pending_sec_level) + hcon->pending_sec_level = sec_level; + if (hcon->link_mode & HCI_LM_MASTER) - if (smp_ltk_encrypt(conn, sec_level)) - goto done; + if (smp_ltk_encrypt(conn, hcon->pending_sec_level)) + return 0; if (test_and_set_bit(HCI_CONN_LE_SMP_PEND, &hcon->flags)) return 0; @@ -918,7 +926,7 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) * requires it. */ if (hcon->io_capability != HCI_IO_NO_INPUT_OUTPUT || - sec_level > BT_SECURITY_MEDIUM) + hcon->pending_sec_level > BT_SECURITY_MEDIUM) authreq |= SMP_AUTH_MITM; if (hcon->link_mode & HCI_LM_MASTER) { @@ -937,9 +945,6 @@ int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) set_bit(SMP_FLAG_INITIATOR, &smp->flags); -done: - hcon->pending_sec_level = sec_level; - return 0; } From 581370cc74ea75426421a1f5851ef05e2e995b01 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 17 Jun 2014 13:07:38 +0300 Subject: [PATCH 05/17] Bluetooth: Refactor authentication method lookup into its own function We'll need to do authentication method lookups from more than one place, so refactor the lookup into its own function. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/smp.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 0189ec8b68d1..7156f4720644 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -385,6 +385,16 @@ static const u8 gen_method[5][5] = { { CFM_PASSKEY, CFM_PASSKEY, REQ_PASSKEY, JUST_WORKS, OVERLAP }, }; +static u8 get_auth_method(struct smp_chan *smp, u8 local_io, u8 remote_io) +{ + /* If either side has unknown io_caps, use JUST WORKS */ + if (local_io > SMP_IO_KEYBOARD_DISPLAY || + remote_io > SMP_IO_KEYBOARD_DISPLAY) + return JUST_WORKS; + + return gen_method[remote_io][local_io]; +} + static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth, u8 local_io, u8 remote_io) { @@ -401,14 +411,11 @@ static int tk_request(struct l2cap_conn *conn, u8 remote_oob, u8 auth, BT_DBG("tk_request: auth:%d lcl:%d rem:%d", auth, local_io, remote_io); /* If neither side wants MITM, use JUST WORKS */ - /* If either side has unknown io_caps, use JUST WORKS */ /* Otherwise, look up method from the table */ - if (!(auth & SMP_AUTH_MITM) || - local_io > SMP_IO_KEYBOARD_DISPLAY || - remote_io > SMP_IO_KEYBOARD_DISPLAY) + if (!(auth & SMP_AUTH_MITM)) method = JUST_WORKS; else - method = gen_method[remote_io][local_io]; + method = get_auth_method(smp, local_io, remote_io); /* If not bonding, don't ask user to confirm a Zero TK */ if (!(auth & SMP_AUTH_BONDING) && method == JUST_CFM) From 2ed8f65ca262bca778e60053f667ce11b32db6b8 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 17 Jun 2014 13:07:39 +0300 Subject: [PATCH 06/17] Bluetooth: Fix rejecting pairing in case of insufficient capabilities If we need an MITM protected connection but the local and remote IO capabilities cannot provide it we should reject the pairing attempt in the appropriate way. This patch adds the missing checks for such a situation to the smp_cmd_pairing_req() and smp_cmd_pairing_rsp() functions. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann --- net/bluetooth/smp.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 7156f4720644..e33a982161c1 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -706,6 +706,16 @@ static u8 smp_cmd_pairing_req(struct l2cap_conn *conn, struct sk_buff *skb) if (sec_level > conn->hcon->pending_sec_level) conn->hcon->pending_sec_level = sec_level; + /* If we need MITM check that it can be acheived */ + if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) { + u8 method; + + method = get_auth_method(smp, conn->hcon->io_capability, + req->io_capability); + if (method == JUST_WORKS || method == JUST_CFM) + return SMP_AUTH_REQUIREMENTS; + } + build_pairing_cmd(conn, req, &rsp, auth); key_size = min(req->max_key_size, rsp.max_key_size); @@ -752,6 +762,16 @@ static u8 smp_cmd_pairing_rsp(struct l2cap_conn *conn, struct sk_buff *skb) if (check_enc_key_size(conn, key_size)) return SMP_ENC_KEY_SIZE; + /* If we need MITM check that it can be acheived */ + if (conn->hcon->pending_sec_level >= BT_SECURITY_HIGH) { + u8 method; + + method = get_auth_method(smp, req->io_capability, + rsp->io_capability); + if (method == JUST_WORKS || method == JUST_CFM) + return SMP_AUTH_REQUIREMENTS; + } + get_random_bytes(smp->prnd, sizeof(smp->prnd)); smp->prsp[0] = SMP_CMD_PAIRING_RSP; From 1d56dc4f5f7cdf0ba99062d974b7586a28fc5cf4 Mon Sep 17 00:00:00 2001 From: Lukasz Rymanowski Date: Tue, 17 Jun 2014 13:04:20 +0200 Subject: [PATCH 07/17] Bluetooth: Fix for ACL disconnect when pairing fails When pairing fails hci_conn refcnt drops below zero. This cause that ACL link is not disconnected when disconnect timeout fires. Probably this is because l2cap_conn_del calls l2cap_chan_del for each channel, and inside l2cap_chan_del conn is dropped. After that loop hci_chan_del is called which also drops conn. Anyway, as it is desrcibed in hci_core.h, it is known that refcnt drops below 0 sometimes and it should be fine. If so, let disconnect link when hci_conn_timeout fires and refcnt is 0 or below. This patch does it. This affects PTS test SM_TC_JW_BV_05_C Logs from scenario: [69713.706227] [6515] pair_device: [69713.706230] [6515] hci_conn_add: hci0 dst 00:1b:dc:06:06:22 [69713.706233] [6515] hci_dev_hold: hci0 orig refcnt 8 [69713.706235] [6515] hci_conn_init_sysfs: conn ffff88021f65a000 [69713.706239] [6515] hci_req_add_ev: hci0 opcode 0x200d plen 25 [69713.706242] [6515] hci_prepare_cmd: skb len 28 [69713.706243] [6515] hci_req_run: length 1 [69713.706248] [6515] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 0 [69713.706251] [6515] hci_dev_put: hci0 orig refcnt 9 [69713.706281] [8909] hci_cmd_work: hci0 cmd_cnt 1 cmd queued 1 [69713.706288] [8909] hci_send_frame: hci0 type 1 len 28 [69713.706290] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 28 [69713.706316] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.706382] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711664] [8909] hci_rx_work: hci0 [69713.711668] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 6 [69713.711680] [8909] hci_rx_work: hci0 Event packet [69713.711683] [8909] hci_cs_le_create_conn: hci0 status 0x00 [69713.711685] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711688] [8909] hci_req_cmd_complete: opcode 0x200d status 0x00 [69713.711690] [8909] hci_sent_cmd_data: hci0 opcode 0x200d [69713.711695] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.711744] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818875] [8909] hci_rx_work: hci0 [69713.818889] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 21 [69713.818913] [8909] hci_rx_work: hci0 Event packet [69713.818917] [8909] hci_le_conn_complete_evt: hci0 status 0x00 [69713.818922] [8909] hci_send_to_control: len 19 [69713.818927] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.818938] [8909] hci_conn_add_sysfs: conn ffff88021f65a000 [69713.818975] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69713.818981] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 ... [69713.819021] [8909] hci_dev_hold: hci0 orig refcnt 10 [69713.819025] [8909] l2cap_connect_cfm: hcon ffff88021f65a000 bdaddr 00:1b:dc:06:06:22 status 0 [69713.819028] [8909] hci_chan_create: hci0 hcon ffff88021f65a000 [69713.819031] [8909] l2cap_conn_add: hcon ffff88021f65a000 conn ffff880221005c00 hchan ffff88020d60b1c0 [69713.819034] [8909] l2cap_conn_ready: conn ffff880221005c00 [69713.819036] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.819037] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x02 [69713.819039] [8909] smp_chan_create: [69713.819041] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 1 [69713.819043] [8909] smp_send_cmd: code 0x01 [69713.819045] [8909] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.819046] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819049] [8909] hci_queue_acl: hci0 nonfrag skb ffff88005157c100 len 15 [69713.819055] [5949] hci_sock_recvmsg: sock ffff8800941a9900, sk ffff88012bf4e800 [69713.819057] [8909] l2cap_le_conn_ready: [69713.819064] [8909] l2cap_chan_create: chan ffff88005ede2c00 [69713.819066] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 1 [69713.819069] [8909] l2cap_sock_init: sk ffff88005ede5800 [69713.819072] [8909] bt_accept_enqueue: parent ffff880160356000, sk ffff88005ede5800 [69713.819074] [8909] __l2cap_chan_add: conn ffff880221005c00, psm 0x00, dcid 0x0004 [69713.819076] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 2 [69713.819078] [8909] hci_conn_hold: hcon ffff88021f65a000 orig refcnt 2 [69713.819080] [8909] smp_conn_security: conn ffff880221005c00 hcon ffff88021f65a000 level 0x01 [69713.819082] [8909] l2cap_sock_ready_cb: sk ffff88005ede5800, parent ffff880160356000 [69713.819086] [8909] le_pairing_complete_cb: status 0 [69713.819091] [8909] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.819093] [8909] hci_sched_acl: hci0 [69713.819094] [8909] hci_sched_sco: hci0 [69713.819096] [8909] hci_sched_esco: hci0 [69713.819098] [8909] hci_sched_le: hci0 [69713.819099] [8909] hci_chan_sent: hci0 [69713.819101] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 10 [69713.819104] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff88005157c100 len 15 priority 7 [69713.819106] [8909] hci_send_frame: hci0 type 2 len 15 [69713.819108] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 15 [69713.819119] [8909] hci_chan_sent: hci0 [69713.819121] [8909] hci_prio_recalculate: hci0 [69713.819123] [8909] process_pending_rx: [69713.819226] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 ... [69713.822022] [6450] l2cap_sock_accept: sk ffff880160356000 timeo 0 [69713.822024] [6450] bt_accept_dequeue: parent ffff880160356000 [69713.822026] [6450] bt_accept_unlink: sk ffff88005ede5800 state 1 [69713.822028] [6450] l2cap_sock_accept: new socket ffff88005ede5800 [69713.822368] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822375] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.822383] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.822414] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 ... [69713.823255] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.823259] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.824322] [6450] l2cap_sock_getname: sock ffff8800941ab700, sk ffff88005ede5800 [69713.824330] [6450] l2cap_sock_getsockopt: sk ffff88005ede5800 [69713.825029] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.825187] [6450] l2cap_sock_sendmsg: sock ffff8800941ab700, sk ffff88005ede5800 [69713.825189] [6450] bt_sock_wait_ready: sk ffff88005ede5800 [69713.825192] [6450] l2cap_create_basic_pdu: chan ffff88005ede2c00 len 3 [69713.825196] [6450] l2cap_do_send: chan ffff88005ede2c00, skb ffff880160b0b500 len 7 priority 0 [69713.825199] [6450] hci_send_acl: hci0 chan ffff88020d60b1c0 flags 0x0000 [69713.825201] [6450] hci_queue_acl: hci0 nonfrag skb ffff880160b0b500 len 11 [69713.825210] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.825213] [8909] hci_sched_acl: hci0 [69713.825214] [8909] hci_sched_sco: hci0 [69713.825216] [8909] hci_sched_esco: hci0 [69713.825217] [8909] hci_sched_le: hci0 [69713.825219] [8909] hci_chan_sent: hci0 [69713.825221] [8909] hci_chan_sent: chan ffff88020d60b1c0 quote 9 [69713.825223] [8909] hci_sched_le: chan ffff88020d60b1c0 skb ffff880160b0b500 len 11 priority 0 [69713.825225] [8909] hci_send_frame: hci0 type 2 len 11 [69713.825227] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 11 [69713.825242] [8909] hci_chan_sent: hci0 [69713.825253] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825253] [8909] hci_prio_recalculate: hci0 [69713.825292] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.825768] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69713.866902] [8909] hci_rx_work: hci0 [69713.866921] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.866928] [8909] hci_rx_work: hci0 Event packet [69713.866931] [8909] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.866937] [8909] hci_tx_work: hci0 acl 9 sco 8 le 0 [69713.866939] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.866940] [8909] hci_sched_acl: hci0 ... [69713.866944] [8909] hci_sched_le: hci0 [69713.866953] [8909] hci_chan_sent: hci0 [69713.866997] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867840] [28074] hci_rx_work: hci0 [69713.867844] [28074] hci_send_to_monitor: hdev ffff88021f0c7000 len 7 [69713.867850] [28074] hci_rx_work: hci0 Event packet [69713.867853] [28074] hci_num_comp_pkts_evt: hci0 num_hndl 1 [69713.867857] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69713.867858] [28074] hci_tx_work: hci0 acl 10 sco 8 le 0 [69713.867860] [28074] hci_sched_acl: hci0 [69713.867861] [28074] hci_sched_sco: hci0 [69713.867862] [28074] hci_sched_esco: hci0 [69713.867863] [28074] hci_sched_le: hci0 [69713.867865] [28074] hci_chan_sent: hci0 [69713.867888] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145661] [8909] hci_rx_work: hci0 [69714.145666] [8909] hci_send_to_monitor: hdev ffff88021f0c7000 len 10 [69714.145676] [8909] hci_rx_work: hci0 ACL data packet [69714.145679] [8909] hci_acldata_packet: hci0 len 6 handle 0x002d flags 0x0002 [69714.145681] [8909] hci_conn_enter_active_mode: hcon ffff88021f65a000 mode 0 [69714.145683] [8909] l2cap_recv_acldata: conn ffff880221005c00 len 6 flags 0x2 [69714.145693] [8909] l2cap_recv_frame: len 2, cid 0x0006 [69714.145696] [8909] hci_send_to_control: len 14 [69714.145710] [8909] smp_chan_destroy: [69714.145713] [8909] pairing_complete: status 3 [69714.145714] [8909] cmd_complete: sock ffff88010323ac00 [69714.145717] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 3 [69714.145719] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145720] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 [69714.145722] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145724] [6450] bt_sock_poll: sock ffff8801db6b4f00, sk ffff880160351c00 ... [69714.145735] [6515] hci_sock_recvmsg: sock ffff88005e75a080, sk ffff88010323ac00 [69714.145737] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 2 [69714.145739] [8909] l2cap_conn_del: hcon ffff88021f65a000 conn ffff880221005c00, err 13 [69714.145740] [6450] bt_sock_poll: sock ffff8801db6b5400, sk ffff88021e775000 [69714.145743] [6450] bt_sock_poll: sock ffff8801db6b5e00, sk ffff880160356000 [69714.145744] [8909] l2cap_chan_hold: chan ffff88005ede2c00 orig refcnt 3 [69714.145746] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145748] [8909] l2cap_chan_del: chan ffff88005ede2c00, conn ffff880221005c00, err 13 [69714.145749] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 4 [69714.145751] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 1 [69714.145754] [6450] bt_sock_poll: sock ffff8800941ab700, sk ffff88005ede5800 [69714.145756] [8909] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 3 [69714.145759] [8909] hci_chan_del: hci0 hcon ffff88021f65a000 chan ffff88020d60b1c0 [69714.145766] [5949] hci_sock_recvmsg: sock ffff8800941a9680, sk ffff88012bf4d000 [69714.145787] [6515] hci_sock_release: sock ffff88005e75a080 sk ffff88010323ac00 [69714.146002] [6450] hci_sock_recvmsg: sock ffff88005e758780, sk ffff88010323d400 [69714.150795] [6450] l2cap_sock_release: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150799] [6450] l2cap_sock_shutdown: sock ffff8800941ab700, sk ffff88005ede5800 [69714.150802] [6450] l2cap_chan_close: chan ffff88005ede2c00 state BT_CLOSED [69714.150805] [6450] l2cap_sock_kill: sk ffff88005ede5800 state BT_CLOSED [69714.150806] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 2 [69714.150808] [6450] l2cap_sock_destruct: sk ffff88005ede5800 [69714.150809] [6450] l2cap_chan_put: chan ffff88005ede2c00 orig refcnt 1 [69714.150811] [6450] l2cap_chan_destroy: chan ffff88005ede2c00 [69714.150970] [6450] bt_sock_poll: sock ffff88005e758500, sk ffff88010323b800 ... [69714.151991] [8909] hci_conn_drop: hcon ffff88021f65a000 orig refcnt 0 [69716.150339] [8909] hci_conn_timeout: hcon ffff88021f65a000 state BT_CONNECTED, refcnt -1 Signed-off-by: Lukasz Rymanowski Signed-off-by: Marcel Holtmann --- net/bluetooth/hci_conn.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index ca01d1861854..a7a27bc2c0b1 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -289,10 +289,20 @@ static void hci_conn_timeout(struct work_struct *work) { struct hci_conn *conn = container_of(work, struct hci_conn, disc_work.work); + int refcnt = atomic_read(&conn->refcnt); BT_DBG("hcon %p state %s", conn, state_to_string(conn->state)); - if (atomic_read(&conn->refcnt)) + WARN_ON(refcnt < 0); + + /* FIXME: It was observed that in pairing failed scenario, refcnt + * drops below 0. Probably this is because l2cap_conn_del calls + * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is + * dropped. After that loop hci_chan_del is called which also drops + * conn. For now make sure that ACL is alive if refcnt is higher then 0, + * otherwise drop it. + */ + if (refcnt > 0) return; switch (conn->state) { From 744462a91ecf5d1ec64857488bf99000ef626921 Mon Sep 17 00:00:00 2001 From: Max Stepanov Date: Tue, 10 Jun 2014 20:00:08 +0300 Subject: [PATCH 08/17] mac80211: WEP extra head/tail room in ieee80211_send_auth After skb allocation and call to ieee80211_wep_encrypt in ieee80211_send_auth the flow fails with a warning in ieee80211_wep_add_iv on verification of available head/tailroom needed for WEP_IV and WEP_ICV. Signed-off-by: Max Stepanov Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/mac80211/util.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 6886601afe1c..a6cda52ed920 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1096,11 +1096,12 @@ void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, int err; /* 24 + 6 = header + auth_algo + auth_transaction + status_code */ - skb = dev_alloc_skb(local->hw.extra_tx_headroom + 24 + 6 + extra_len); + skb = dev_alloc_skb(local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN + + 24 + 6 + extra_len + IEEE80211_WEP_ICV_LEN); if (!skb) return; - skb_reserve(skb, local->hw.extra_tx_headroom); + skb_reserve(skb, local->hw.extra_tx_headroom + IEEE80211_WEP_IV_LEN); mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24 + 6); memset(mgmt, 0, 24 + 6); From e33e2241e272eddc38339692500bd1c7d8753a77 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jun 2014 11:06:16 +0200 Subject: [PATCH 09/17] Revert "cfg80211: Use 5MHz bandwidth by default when checking usable channels" This reverts commit 8eca1fb692cc9557f386eddce75c300a3855d11a. Felix notes that this broke regulatory, leaving channel 12 open for AP operation in the US regulatory domain where it isn't permitted. Link: http://mid.gmane.org/53A6C0FF.9090104@openwrt.org Reported-by: Felix Fietkau Signed-off-by: Johannes Berg --- net/wireless/reg.c | 22 +++++++--------------- 1 file changed, 7 insertions(+), 15 deletions(-) diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 558b0e3a02d8..1afdf45db38f 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -935,7 +935,7 @@ freq_reg_info_regd(struct wiphy *wiphy, u32 center_freq, if (!band_rule_found) band_rule_found = freq_in_rule_band(fr, center_freq); - bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(5)); + bw_fits = reg_does_bw_fit(fr, center_freq, MHZ_TO_KHZ(20)); if (band_rule_found && bw_fits) return rr; @@ -1019,10 +1019,10 @@ static void chan_reg_rule_print_dbg(const struct ieee80211_regdomain *regd, } #endif -/* Find an ieee80211_reg_rule such that a 5MHz channel with frequency - * chan->center_freq fits there. - * If there is no such reg_rule, disable the channel, otherwise set the - * flags corresponding to the bandwidths allowed in the particular reg_rule +/* + * Note that right now we assume the desired channel bandwidth + * is always 20 MHz for each individual channel (HT40 uses 20 MHz + * per channel, the primary and the extension channel). */ static void handle_channel(struct wiphy *wiphy, enum nl80211_reg_initiator initiator, @@ -1083,12 +1083,8 @@ static void handle_channel(struct wiphy *wiphy, if (reg_rule->flags & NL80211_RRF_AUTO_BW) max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); - if (max_bandwidth_khz < MHZ_TO_KHZ(10)) - bw_flags = IEEE80211_CHAN_NO_10MHZ; - if (max_bandwidth_khz < MHZ_TO_KHZ(20)) - bw_flags |= IEEE80211_CHAN_NO_20MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(40)) - bw_flags |= IEEE80211_CHAN_NO_HT40; + bw_flags = IEEE80211_CHAN_NO_HT40; if (max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(160)) @@ -1522,12 +1518,8 @@ static void handle_channel_custom(struct wiphy *wiphy, if (reg_rule->flags & NL80211_RRF_AUTO_BW) max_bandwidth_khz = reg_get_max_bandwidth(regd, reg_rule); - if (max_bandwidth_khz < MHZ_TO_KHZ(10)) - bw_flags = IEEE80211_CHAN_NO_10MHZ; - if (max_bandwidth_khz < MHZ_TO_KHZ(20)) - bw_flags |= IEEE80211_CHAN_NO_20MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(40)) - bw_flags |= IEEE80211_CHAN_NO_HT40; + bw_flags = IEEE80211_CHAN_NO_HT40; if (max_bandwidth_khz < MHZ_TO_KHZ(80)) bw_flags |= IEEE80211_CHAN_NO_80MHZ; if (max_bandwidth_khz < MHZ_TO_KHZ(160)) From 0ce12026d6ea4a24d52ddcde36b9643f2e26d560 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 17 Jun 2014 13:07:02 +0300 Subject: [PATCH 10/17] cfg80211: fix elapsed_jiffies calculation MAX_JIFFY_OFFSET has no meaning when calculating the elapsed jiffies, as jiffies run out until ULONG_MAX. This miscalculation results in erroneous values in case of a wrap-around. Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg --- net/wireless/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/wireless/core.h b/net/wireless/core.h index e9afbf10e756..7e3a3cef7df9 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -424,7 +424,7 @@ static inline unsigned int elapsed_jiffies_msecs(unsigned long start) if (end >= start) return jiffies_to_msecs(end - start); - return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); + return jiffies_to_msecs(end + (ULONG_MAX - start) + 1); } void From 48439d501e3d9e8634bdc0c418e066870039599d Mon Sep 17 00:00:00 2001 From: Loic Poulain Date: Mon, 23 Jun 2014 17:42:44 +0200 Subject: [PATCH 11/17] Bluetooth: Ignore H5 non-link packets in non-active state When detecting a non-link packet, h5_reset_rx() frees the Rx skb. Not returning after that will cause the upcoming h5_rx_payload() call to dereference a now NULL Rx skb and trigger a kernel oops. Signed-off-by: Loic Poulain Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org --- drivers/bluetooth/hci_h5.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/hci_h5.c b/drivers/bluetooth/hci_h5.c index 04680ead9275..fede8ca7147c 100644 --- a/drivers/bluetooth/hci_h5.c +++ b/drivers/bluetooth/hci_h5.c @@ -406,6 +406,7 @@ static int h5_rx_3wire_hdr(struct hci_uart *hu, unsigned char c) H5_HDR_PKT_TYPE(hdr) != HCI_3WIRE_LINK_PKT) { BT_ERR("Non-link packet received in non-active state"); h5_reset_rx(h5); + return 0; } h5->rx_func = h5_rx_payload; From 89879413eba4d9f57b69f84a32fd085d54057df3 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 26 May 2014 18:44:35 +0300 Subject: [PATCH 12/17] iwlwifi: mvm: rework sched scan channel configuration The current sched scan channel configuration code configures all the supported channels for scanning. However, this can result in SYSASSERT in some cases, when the configured channel is disabled. Instead, configure only the channels given in the req struct, and set the channel_count field appropriately. While on it, change the code to use channel->hw_value instead of recalculating the channel number. Signed-off-by: Eliad Peller Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/mvm/scan.c | 63 +++++++------------------ 1 file changed, 18 insertions(+), 45 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 4b6c7d4bd199..eac2b424f6a0 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -588,9 +588,7 @@ static void iwl_build_scan_cmd(struct iwl_mvm *mvm, struct iwl_scan_offload_cmd *scan, struct iwl_mvm_scan_params *params) { - scan->channel_count = - mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels + - mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels; + scan->channel_count = req->n_channels; scan->quiet_time = cpu_to_le16(IWL_ACTIVE_QUIET_TIME); scan->quiet_plcp_th = cpu_to_le16(IWL_PLCP_QUIET_THRESH); scan->good_CRC_th = IWL_GOOD_CRC_TH_DEFAULT; @@ -669,61 +667,37 @@ static void iwl_build_channel_cfg(struct iwl_mvm *mvm, struct cfg80211_sched_scan_request *req, struct iwl_scan_channel_cfg *channels, enum ieee80211_band band, - int *head, int *tail, + int *head, u32 ssid_bitmap, struct iwl_mvm_scan_params *params) { - struct ieee80211_supported_band *s_band; - int n_channels = req->n_channels; - int i, j, index = 0; - bool partial; + int i, index = 0; - /* - * We have to configure all supported channels, even if we don't want to - * scan on them, but we have to send channels in the order that we want - * to scan. So add requested channels to head of the list and others to - * the end. - */ - s_band = &mvm->nvm_data->bands[band]; + for (i = 0; i < req->n_channels; i++) { + struct ieee80211_channel *chan = req->channels[i]; - for (i = 0; i < s_band->n_channels && *head <= *tail; i++) { - partial = false; - for (j = 0; j < n_channels; j++) - if (s_band->channels[i].center_freq == - req->channels[j]->center_freq) { - index = *head; - (*head)++; - /* - * Channels that came with the request will be - * in partial scan . - */ - partial = true; - break; - } - if (!partial) { - index = *tail; - (*tail)--; - } - channels->channel_number[index] = - cpu_to_le16(ieee80211_frequency_to_channel( - s_band->channels[i].center_freq)); + if (chan->band != band) + continue; + + index = *head; + (*head)++; + + channels->channel_number[index] = cpu_to_le16(chan->hw_value); channels->dwell_time[index][0] = params->dwell[band].active; channels->dwell_time[index][1] = params->dwell[band].passive; channels->iter_count[index] = cpu_to_le16(1); channels->iter_interval[index] = 0; - if (!(s_band->channels[i].flags & IEEE80211_CHAN_NO_IR)) + if (!(chan->flags & IEEE80211_CHAN_NO_IR)) channels->type[index] |= cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_ACTIVE); channels->type[index] |= - cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL); - if (partial) - channels->type[index] |= - cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL); + cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_FULL | + IWL_SCAN_OFFLOAD_CHANNEL_PARTIAL); - if (s_band->channels[i].flags & IEEE80211_CHAN_NO_HT40) + if (chan->flags & IEEE80211_CHAN_NO_HT40) channels->type[index] |= cpu_to_le32(IWL_SCAN_OFFLOAD_CHANNEL_NARROW); @@ -740,7 +714,6 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm, int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels; int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels; int head = 0; - int tail = band_2ghz + band_5ghz - 1; u32 ssid_bitmap; int cmd_len; int ret; @@ -772,7 +745,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm, &scan_cfg->scan_cmd.tx_cmd[0], scan_cfg->data); iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg, - IEEE80211_BAND_2GHZ, &head, &tail, + IEEE80211_BAND_2GHZ, &head, ssid_bitmap, ¶ms); } if (band_5ghz) { @@ -782,7 +755,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm, scan_cfg->data + SCAN_OFFLOAD_PROBE_REQ_SIZE); iwl_build_channel_cfg(mvm, req, &scan_cfg->channel_cfg, - IEEE80211_BAND_5GHZ, &head, &tail, + IEEE80211_BAND_5GHZ, &head, ssid_bitmap, ¶ms); } From 02df00eb0019e7d15a1fcddebe4d020226c1ccda Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 10 Jun 2014 14:06:25 +0200 Subject: [PATCH 13/17] nl80211: move set_qos_map command into split state The non-split wiphy state shouldn't be increased in size so move the new set_qos_map command into the split if statement. Cc: stable@vger.kernel.org (3.14+) Fixes: fa9ffc745610 ("cfg80211: Add support for QoS mapping") Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg --- net/wireless/nl80211.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index ba4f1723c83a..6668daf69326 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1497,18 +1497,17 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *rdev, } CMD(start_p2p_device, START_P2P_DEVICE); CMD(set_mcast_rate, SET_MCAST_RATE); +#ifdef CONFIG_NL80211_TESTMODE + CMD(testmode_cmd, TESTMODE); +#endif if (state->split) { CMD(crit_proto_start, CRIT_PROTOCOL_START); CMD(crit_proto_stop, CRIT_PROTOCOL_STOP); if (rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH) CMD(channel_switch, CHANNEL_SWITCH); + CMD(set_qos_map, SET_QOS_MAP); } - CMD(set_qos_map, SET_QOS_MAP); - -#ifdef CONFIG_NL80211_TESTMODE - CMD(testmode_cmd, TESTMODE); -#endif - + /* add into the if now */ #undef CMD if (rdev->ops->connect || rdev->ops->auth) { From b3c063ae7279981f7161e63b44f214c62f122b32 Mon Sep 17 00:00:00 2001 From: Oren Givon Date: Sun, 25 May 2014 16:31:58 +0300 Subject: [PATCH 14/17] iwlwifi: update the 7265 series HW IDs Add one more 7265 series HW ID. Edit one existing 7265 series HW ID. CC: [3.13+] Signed-off-by: Oren Givon Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/pcie/drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 7091a18d5a72..98950e45c7b0 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -367,6 +367,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5412, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5510, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)}, @@ -380,7 +381,7 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { {IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)}, - {IWL_PCI_DEVICE(0x095A, 0x9200, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095B, 0x9200, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9410, iwl7265_2ac_cfg)}, From a42c9fcc4a88cdd246fab3bcf06c4487afee3d88 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Thu, 8 May 2014 16:17:31 +0300 Subject: [PATCH 15/17] Revert "iwlwifi: remove IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT flag" This reverts commit dc9a19296a872644f19a06d8eeb5db222d327b41. 3610 cards don't support UAPSD. Signed-off-by: Arik Nemtsov Signed-off-by: Emmanuel Grumbach --- drivers/net/wireless/iwlwifi/iwl-fw.h | 1 + drivers/net/wireless/iwlwifi/mvm/mac80211.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-fw.h b/drivers/net/wireless/iwlwifi/iwl-fw.h index 0aa7c0085c9f..b1a33322b9ba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fw.h +++ b/drivers/net/wireless/iwlwifi/iwl-fw.h @@ -88,6 +88,7 @@ * P2P client interfaces simultaneously if they are in different bindings. * @IWL_UCODE_TLV_FLAGS_P2P_BSS_PS_SCM: support power save on BSS station and * P2P client interfaces simultaneously if they are in same bindings. + * @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD * @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save * @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering. * @IWL_UCODE_TLV_FLAGS_GO_UAPSD: AP/GO interfaces support uAPSD clients diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index 7215f5980186..1cef708cb74d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -303,6 +303,13 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; } + if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT && + !iwlwifi_mod_params.uapsd_disable) { + hw->flags |= IEEE80211_HW_SUPPORTS_UAPSD; + hw->uapsd_queues = IWL_UAPSD_AC_INFO; + hw->uapsd_max_sp_len = IWL_UAPSD_MAX_SP; + } + hw->sta_data_size = sizeof(struct iwl_mvm_sta); hw->vif_data_size = sizeof(struct iwl_mvm_vif); hw->chanctx_data_size = sizeof(u16); From d76744a93246eccdca1106037e8ee29debf48277 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Fri, 20 Jun 2014 11:45:25 -0700 Subject: [PATCH 16/17] mwifiex: fix Tx timeout issue https://bugzilla.kernel.org/show_bug.cgi?id=70191 https://bugzilla.kernel.org/show_bug.cgi?id=77581 It is observed that sometimes Tx packet is downloaded without adding driver's txpd header. This results in firmware parsing garbage data as packet length. Sometimes firmware is unable to read the packet if length comes out as invalid. This stops further traffic and timeout occurs. The root cause is uninitialized fields in tx_info(skb->cb) of packet used to get garbage values. In this case if MWIFIEX_BUF_FLAG_REQUEUED_PKT flag is mistakenly set, txpd header was skipped. This patch makes sure that tx_info is correctly initialized to fix the problem. Cc: Reported-by: Andrew Wiley Reported-by: Linus Gasser Reported-by: Michael Hirsch Tested-by: Xinming Hu Signed-off-by: Amitkumar Karwar Signed-off-by: Maithili Hinge Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville --- drivers/net/wireless/mwifiex/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/mwifiex/main.c b/drivers/net/wireless/mwifiex/main.c index cbabc12fbda3..e91cd0fa5ca8 100644 --- a/drivers/net/wireless/mwifiex/main.c +++ b/drivers/net/wireless/mwifiex/main.c @@ -645,6 +645,7 @@ mwifiex_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) } tx_info = MWIFIEX_SKB_TXCB(skb); + memset(tx_info, 0, sizeof(*tx_info)); tx_info->bss_num = priv->bss_num; tx_info->bss_type = priv->bss_type; tx_info->pkt_len = skb->len; From c6bff5449fa78e1d524bb5b67b8ab82faf835bff Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Fri, 20 Jun 2014 22:19:25 +0200 Subject: [PATCH 17/17] brcmfmac: assign chip id and rev in bus interface after brcmf_usb_dlneeded The function brcmf_usb_dlneeded() queries the device to obtain the chip id and revision. So assigning these in bus interface before the call resulted in chip id and revision being zero. This was introduced by: commit 5b8045d484d0ef77d6aa9444023220c5671fa3fe Author: Arend van Spriel Date: Tue May 27 12:56:23 2014 +0200 brcmfmac: use asynchronous firmware request in USB Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/usb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 6db51a666f61..d06fcb05adf2 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -1184,8 +1184,6 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) bus->bus_priv.usb = bus_pub; dev_set_drvdata(dev, bus); bus->ops = &brcmf_usb_bus_ops; - bus->chip = bus_pub->devid; - bus->chiprev = bus_pub->chiprev; bus->proto_type = BRCMF_PROTO_BCDC; bus->always_use_fws_queue = true; @@ -1194,6 +1192,9 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo) if (ret) goto fail; } + bus->chip = bus_pub->devid; + bus->chiprev = bus_pub->chiprev; + /* request firmware here */ brcmf_fw_get_firmwares(dev, 0, brcmf_usb_get_fwname(devinfo), NULL, brcmf_usb_probe_phase2);