net: phy: add qca8081 config_aneg
Reuse at803x phy driver config_aneg excepting adding 2500M auto-negotiation. Signed-off-by: Luo Jie <luoj@codeaurora.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
765c22aad1
commit
f884d449bf
|
@ -1109,7 +1109,30 @@ static int at803x_config_aneg(struct phy_device *phydev)
|
|||
return ret;
|
||||
}
|
||||
|
||||
return genphy_config_aneg(phydev);
|
||||
/* Do not restart auto-negotiation by setting ret to 0 defautly,
|
||||
* when calling __genphy_config_aneg later.
|
||||
*/
|
||||
ret = 0;
|
||||
|
||||
if (phydev->drv->phy_id == QCA8081_PHY_ID) {
|
||||
int phy_ctrl = 0;
|
||||
|
||||
/* The reg MII_BMCR also needs to be configured for force mode, the
|
||||
* genphy_config_aneg is also needed.
|
||||
*/
|
||||
if (phydev->autoneg == AUTONEG_DISABLE)
|
||||
genphy_c45_pma_setup_forced(phydev);
|
||||
|
||||
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, phydev->advertising))
|
||||
phy_ctrl = MDIO_AN_10GBT_CTRL_ADV2_5G;
|
||||
|
||||
ret = phy_modify_mmd_changed(phydev, MDIO_MMD_AN, MDIO_AN_10GBT_CTRL,
|
||||
MDIO_AN_10GBT_CTRL_ADV2_5G, phy_ctrl);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
}
|
||||
|
||||
return __genphy_config_aneg(phydev, ret);
|
||||
}
|
||||
|
||||
static int at803x_get_downshift(struct phy_device *phydev, u8 *d)
|
||||
|
@ -1663,6 +1686,7 @@ static struct phy_driver at803x_driver[] = {
|
|||
.set_wol = at803x_set_wol,
|
||||
.get_wol = at803x_get_wol,
|
||||
.get_features = at803x_get_features,
|
||||
.config_aneg = at803x_config_aneg,
|
||||
.suspend = genphy_suspend,
|
||||
.resume = genphy_resume,
|
||||
.read_status = qca808x_read_status,
|
||||
|
|
Loading…
Reference in New Issue