diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus index d4077cc60d55..e46be65d0e1d 100644 --- a/Documentation/ABI/stable/sysfs-bus-vmbus +++ b/Documentation/ABI/stable/sysfs-bus-vmbus @@ -42,72 +42,93 @@ Contact: K. Y. Srinivasan Description: The 16 bit vendor ID of the device Users: tools/hv/lsvmbus and user level RDMA libraries -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN +Date: September. 2017 +KernelVersion: 4.14 +Contact: Stephen Hemminger +Description: Directory for per-channel information + NN is the VMBUS relid associtated with the channel. + +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/cpu Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger Description: VCPU (sub)channel is affinitized to -Users: tools/hv/lsvmbus and other debuggig tools +Users: tools/hv/lsvmbus and other debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/cpu Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger Description: VCPU (sub)channel is affinitized to -Users: tools/hv/lsvmbus and other debuggig tools +Users: tools/hv/lsvmbus and other debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/in_mask Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger -Description: Inbound channel signaling state +Description: Host to guest channel interrupt mask Users: Debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/latency +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/latency Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger Description: Channel signaling latency Users: Debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/out_mask Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger -Description: Outbound channel signaling state +Description: Guest to host channel interrupt mask Users: Debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/pending +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/pending Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger Description: Channel interrupt pending state Users: Debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/read_avail Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger -Description: Bytes availabble to read +Description: Bytes available to read Users: Debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/write_avail Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger -Description: Bytes availabble to write +Description: Bytes available to write Users: Debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/events +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/events Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger Description: Number of times we have signaled the host Users: Debugging tools -What: /sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/interrupts Date: September. 2017 KernelVersion: 4.14 Contact: Stephen Hemminger Description: Number of times we have taken an interrupt (incoming) Users: Debugging tools + +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/subchannel_id +Date: January. 2018 +KernelVersion: 4.16 +Contact: Stephen Hemminger +Description: Subchannel ID associated with VMBUS channel +Users: Debugging tools and userspace drivers + +What: /sys/bus/vmbus/devices/vmbus_*/channels/NN/monitor_id +Date: January. 2018 +KernelVersion: 4.16 +Contact: Stephen Hemminger +Description: Monitor bit associated with channel +Users: Debugging tools and userspace drivers diff --git a/Documentation/ABI/testing/sysfs-bus-siox b/Documentation/ABI/testing/sysfs-bus-siox new file mode 100644 index 000000000000..fed7c3765a4e --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-siox @@ -0,0 +1,87 @@ +What: /sys/bus/siox/devices/siox-X/active +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + On reading represents the current state of the bus. If it + contains a "0" the bus is stopped and connected devices are + expected to not do anything because their watchdog triggered. + When the file contains a "1" the bus is operated and periodically + does a push-pull cycle to write and read data from the + connected devices. + When writing a "0" or "1" the bus moves to the described state. + +What: /sys/bus/siox/devices/siox-X/device_add +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Write-only file. Write + + + + to add a new device dynamically. is the name that is used to match + to a driver (similar to the platform bus). and define + the length of the input and output shift register in bytes respectively. + defines the 4 bit device type that is check to identify connection + problems. + The new device is added to the end of the existing chain. + +What: /sys/bus/siox/devices/siox-X/device_remove +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Write-only file. A single write removes the last device in the siox chain. + +What: /sys/bus/siox/devices/siox-X/poll_interval_ns +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Defines the interval between two poll cycles in nano seconds. + Note this is rounded to jiffies on writing. On reading the current value + is returned. + +What: /sys/bus/siox/devices/siox-X-Y/connected +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Read-only value. "0" means the Yth device on siox bus X isn't "connected" i.e. + communication with it is not ensured. "1" signals a working connection. + +What: /sys/bus/siox/devices/siox-X-Y/inbytes +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Read-only value reporting the inbytes value provided to siox-X/device_add + +What: /sys/bus/siox/devices/siox-X-Y/status_errors +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Counts the number of time intervals when the read status byte doesn't yield the + expected value. + +What: /sys/bus/siox/devices/siox-X-Y/type +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Read-only value reporting the type value provided to siox-X/device_add. + +What: /sys/bus/siox/devices/siox-X-Y/watchdog +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Read-only value reporting if the watchdog of the siox device is + active. "0" means the watchdog is not active and the device is expected to + be operational. "1" means the watchdog keeps the device in reset. + +What: /sys/bus/siox/devices/siox-X-Y/watchdog_errors +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Read-only value reporting the number to time intervals when the + watchdog was active. + +What: /sys/bus/siox/devices/siox-X-Y/outbytes +KernelVersion: 4.16 +Contact: Gavin Schenk , Uwe Kleine-König +Description: + Read-only value reporting the outbytes value provided to siox-X/device_add. diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt index e823d90b802f..b3bde97dc199 100644 --- a/Documentation/devicetree/bindings/eeprom/at25.txt +++ b/Documentation/devicetree/bindings/eeprom/at25.txt @@ -11,7 +11,9 @@ Required properties: - spi-max-frequency : max spi frequency to use - pagesize : size of the eeprom page - size : total eeprom size in bytes -- address-width : number of address bits (one of 8, 16, or 24) +- address-width : number of address bits (one of 8, 9, 16, or 24). + For 9 bits, the MSB of the address is sent as bit 3 of the instruction + byte, before the address byte. Optional properties: - spi-cpha : SPI shifted clock phase, as per spi-bus bindings. diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt index 60bec4782806..265bdb7dc8aa 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -6,12 +6,17 @@ Required properties: - "rockchip,rk3188-efuse" - for RK3188 SoCs. - "rockchip,rk3228-efuse" - for RK3228 SoCs. - "rockchip,rk3288-efuse" - for RK3288 SoCs. + - "rockchip,rk3328-efuse" - for RK3328 SoCs. - "rockchip,rk3368-efuse" - for RK3368 SoCs. - "rockchip,rk3399-efuse" - for RK3399 SoCs. - reg: Should contain the registers location and exact eFuse size - clocks: Should be the clock id of eFuse - clock-names: Should be "pclk_efuse" +Optional properties: +- rockchip,efuse-size: Should be exact eFuse size in byte, the eFuse + size in property will be invalid if define this property. + Deprecated properties: - compatible: "rockchip,rockchip-efuse" Old efuse compatible value compatible to rk3066a, rk3188 and rk3288 diff --git a/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt new file mode 100644 index 000000000000..55259cf39c25 --- /dev/null +++ b/Documentation/devicetree/bindings/siox/eckelmann,siox-gpio.txt @@ -0,0 +1,19 @@ +Eckelmann SIOX GPIO bus + +Required properties: +- compatible : "eckelmann,siox-gpio" +- din-gpios, dout-gpios, dclk-gpios, dld-gpios: references gpios for the + corresponding bus signals. + +Examples: + + siox { + compatible = "eckelmann,siox-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_siox>; + + din-gpios = <&gpio6 11 0>; + dout-gpios = <&gpio6 8 0>; + dclk-gpios = <&gpio6 9 0>; + dld-gpios = <&gpio6 10 0>; + }; diff --git a/Documentation/devicetree/bindings/slimbus/bus.txt b/Documentation/devicetree/bindings/slimbus/bus.txt new file mode 100644 index 000000000000..52fa6426388c --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/bus.txt @@ -0,0 +1,50 @@ +SLIM(Serial Low Power Interchip Media Bus) bus + +SLIMbus is a 2-wire bus, and is used to communicate with peripheral +components like audio-codec. + +Required property for SLIMbus controller node: +- compatible - name of SLIMbus controller + +Child nodes: +Every SLIMbus controller node can contain zero or more child nodes +representing slave devices on the bus. Every SLIMbus slave device is +uniquely determined by the enumeration address containing 4 fields: +Manufacturer ID, Product code, Device index, and Instance value for +the device. +If child node is not present and it is instantiated after device +discovery (slave device reporting itself present). + +In some cases it may be necessary to describe non-probeable device +details such as non-standard ways of powering up a device. In +such cases, child nodes for those devices will be present as +slaves of the SLIMbus controller, as detailed below. + +Required property for SLIMbus child node if it is present: +- reg - Should be ('Device index', 'Instance ID') from SLIMbus + Enumeration Address. + Device Index Uniquely identifies multiple Devices within + a single Component. + Instance ID Is for the cases where multiple Devices of the + same type or Class are attached to the bus. + +- compatible -"slimMID,PID". The textual representation of Manufacturer ID, + Product Code, shall be in lower case hexadecimal with leading + zeroes suppressed + +SLIMbus example for Qualcomm's slimbus manager component: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + codec: wcd9310@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt new file mode 100644 index 000000000000..922dcb8ff24a --- /dev/null +++ b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt @@ -0,0 +1,39 @@ +Qualcomm SLIMbus controller +This controller is used if applications processor driver controls SLIMbus +master component. + +Required properties: + + - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + - #size-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt + + - reg : Offset and length of the register region(s) for the device + - reg-names : Register region name(s) referenced in reg above + Required register resource entries are: + "ctrl": Physical address of controller register blocks + "slew": required for "qcom,apq8064-slim" SOC. + - compatible : should be "qcom,-slim" for SOC specific compatible + followed by "qcom,slim" for fallback. + - interrupts : Interrupt number used by this controller + - clocks : Interface and core clocks used by this SLIMbus controller + - clock-names : Required clock-name entries are: + "iface" : Interface clock for this controller + "core" : Interrupt for controller core's BAM + +Example: + + slim@28080000 { + compatible = "qcom,apq8064-slim", "qcom,slim"; + reg = <0x28080000 0x2000>, <0x80207C 4>; + reg-names = "ctrl", "slew"; + interrupts = <0 33 0>; + clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>; + clock-names = "iface", "core"; + #address-cells = <2>; + #size-cell = <0>; + + wcd9310: audio-codec@1,0{ + compatible = "slim217,60"; + reg = <1 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index f776fb804a8c..6ec1a028a3a8 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -97,6 +97,7 @@ dptechnics DPTechnics dragino Dragino Technology Co., Limited ea Embedded Artists AB ebv EBV Elektronik +eckelmann Eckelmann AG edt Emerging Display Technologies eeti eGalax_eMPIA Technology Inc elan Elan Microelectronic Corp. diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst index d17a9876b473..e9b41b1634f3 100644 --- a/Documentation/driver-api/index.rst +++ b/Documentation/driver-api/index.rst @@ -47,6 +47,8 @@ available subsections can be seen below. gpio misc_devices dmaengine/index + slimbus + soundwire/index .. only:: subproject and html diff --git a/Documentation/driver-api/slimbus.rst b/Documentation/driver-api/slimbus.rst new file mode 100644 index 000000000000..7555ecd538de --- /dev/null +++ b/Documentation/driver-api/slimbus.rst @@ -0,0 +1,127 @@ +============================ +Linux kernel SLIMbus support +============================ + +Overview +======== + +What is SLIMbus? +---------------- +SLIMbus (Serial Low Power Interchip Media Bus) is a specification developed by +MIPI (Mobile Industry Processor Interface) alliance. The bus uses master/slave +configuration, and is a 2-wire multi-drop implementation (clock, and data). + +Currently, SLIMbus is used to interface between application processors of SoCs +(System-on-Chip) and peripheral components (typically codec). SLIMbus uses +Time-Division-Multiplexing to accommodate multiple data channels, and +a control channel. + +The control channel is used for various control functions such as bus +management, configuration and status updates. These messages can be unicast (e.g. +reading/writing device specific values), or multicast (e.g. data channel +reconfiguration sequence is a broadcast message announced to all devices) + +A data channel is used for data-transfer between 2 SLIMbus devices. Data +channel uses dedicated ports on the device. + +Hardware description: +--------------------- +SLIMbus specification has different types of device classifications based on +their capabilities. +A manager device is responsible for enumeration, configuration, and dynamic +channel allocation. Every bus has 1 active manager. + +A generic device is a device providing application functionality (e.g. codec). + +Framer device is responsible for clocking the bus, and transmitting frame-sync +and framing information on the bus. + +Each SLIMbus component has an interface device for monitoring physical layer. + +Typically each SoC contains SLIMbus component having 1 manager, 1 framer device, +1 generic device (for data channel support), and 1 interface device. +External peripheral SLIMbus component usually has 1 generic device (for +functionality/data channel support), and an associated interface device. +The generic device's registers are mapped as 'value elements' so that they can +be written/read using SLIMbus control channel exchanging control/status type of +information. +In case there are multiple framer devices on the same bus, manager device is +responsible to select the active-framer for clocking the bus. + +Per specification, SLIMbus uses "clock gears" to do power management based on +current frequency and bandwidth requirements. There are 10 clock gears and each +gear changes the SLIMbus frequency to be twice its previous gear. + +Each device has a 6-byte enumeration-address and the manager assigns every +device with a 1-byte logical address after the devices report presence on the +bus. + +Software description: +--------------------- +There are 2 types of SLIMbus drivers: + +slim_controller represents a 'controller' for SLIMbus. This driver should +implement duties needed by the SoC (manager device, associated +interface device for monitoring the layers and reporting errors, default +framer device). + +slim_device represents the 'generic device/component' for SLIMbus, and a +slim_driver should implement driver for that slim_device. + +Device notifications to the driver: +----------------------------------- +Since SLIMbus devices have mechanisms for reporting their presence, the +framework allows drivers to bind when corresponding devices report their +presence on the bus. +However, it is possible that the driver needs to be probed +first so that it can enable corresponding SLIMbus device (e.g. power it up and/or +take it out of reset). To support that behavior, the framework allows drivers +to probe first as well (e.g. using standard DeviceTree compatibility field). +This creates the necessity for the driver to know when the device is functional +(i.e. reported present). device_up callback is used for that reason when the +device reports present and is assigned a logical address by the controller. + +Similarly, SLIMbus devices 'report absent' when they go down. A 'device_down' +callback notifies the driver when the device reports absent and its logical +address assignment is invalidated by the controller. + +Another notification "boot_device" is used to notify the slim_driver when +controller resets the bus. This notification allows the driver to take necessary +steps to boot the device so that it's functional after the bus has been reset. + +Driver and Controller APIs: +-------------------------- +.. kernel-doc:: include/linux/slimbus.h + :internal: + +.. kernel-doc:: drivers/slimbus/slimbus.h + :internal: + +.. kernel-doc:: drivers/slimbus/core.c + :export: + +Clock-pause: +------------ +SLIMbus mandates that a reconfiguration sequence (known as clock-pause) be +broadcast to all active devices on the bus before the bus can enter low-power +mode. Controller uses this sequence when it decides to enter low-power mode so +that corresponding clocks and/or power-rails can be turned off to save power. +Clock-pause is exited by waking up framer device (if controller driver initiates +exiting low power mode), or by toggling the data line (if a slave device wants +to initiate it). + +Clock-pause APIs: +~~~~~~~~~~~~~~~~~ +.. kernel-doc:: drivers/slimbus/sched.c + :export: + +Messaging: +---------- +The framework supports regmap and read/write apis to exchange control-information +with a SLIMbus device. APIs can be synchronous or asynchronous. +The header file has more documentation about messaging APIs. + +Messaging APIs: +~~~~~~~~~~~~~~~ +.. kernel-doc:: drivers/slimbus/messaging.c + :export: diff --git a/Documentation/driver-api/soundwire/index.rst b/Documentation/driver-api/soundwire/index.rst new file mode 100644 index 000000000000..647e94654752 --- /dev/null +++ b/Documentation/driver-api/soundwire/index.rst @@ -0,0 +1,15 @@ +======================= +SoundWire Documentation +======================= + +.. toctree:: + :maxdepth: 1 + + summary + +.. only:: subproject + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/driver-api/soundwire/summary.rst b/Documentation/driver-api/soundwire/summary.rst new file mode 100644 index 000000000000..8193125a2bfb --- /dev/null +++ b/Documentation/driver-api/soundwire/summary.rst @@ -0,0 +1,207 @@ +=========================== +SoundWire Subsystem Summary +=========================== + +SoundWire is a new interface ratified in 2015 by the MIPI Alliance. +SoundWire is used for transporting data typically related to audio +functions. SoundWire interface is optimized to integrate audio devices in +mobile or mobile inspired systems. + +SoundWire is a 2-pin multi-drop interface with data and clock line. It +facilitates development of low cost, efficient, high performance systems. +Broad level key features of SoundWire interface include: + + (1) Transporting all of payload data channels, control information, and setup + commands over a single two-pin interface. + + (2) Lower clock frequency, and hence lower power consumption, by use of DDR + (Dual Data Rate) data transmission. + + (3) Clock scaling and optional multiple data lanes to give wide flexibility + in data rate to match system requirements. + + (4) Device status monitoring, including interrupt-style alerts to the Master. + +The SoundWire protocol supports up to eleven Slave interfaces. All the +interfaces share the common Bus containing data and clock line. Each of the +Slaves can support up to 14 Data Ports. 13 Data Ports are dedicated to audio +transport. Data Port0 is dedicated to transport of Bulk control information, +each of the audio Data Ports (1..14) can support up to 8 Channels in +transmit or receiving mode (typically fixed direction but configurable +direction is enabled by the specification). Bandwidth restrictions to +~19.2..24.576Mbits/s don't however allow for 11*13*8 channels to be +transmitted simultaneously. + +Below figure shows an example of connectivity between a SoundWire Master and +two Slave devices. :: + + +---------------+ +---------------+ + | | Clock Signal | | + | Master |-------+-------------------------------| Slave | + | Interface | | Data Signal | Interface 1 | + | |-------|-------+-----------------------| | + +---------------+ | | +---------------+ + | | + | | + | | + +--+-------+--+ + | | + | Slave | + | Interface 2 | + | | + +-------------+ + + +Terminology +=========== + +The MIPI SoundWire specification uses the term 'device' to refer to a Master +or Slave interface, which of course can be confusing. In this summary and +code we use the term interface only to refer to the hardware. We follow the +Linux device model by mapping each Slave interface connected on the bus as a +device managed by a specific driver. The Linux SoundWire subsystem provides +a framework to implement a SoundWire Slave driver with an API allowing +3rd-party vendors to enable implementation-defined functionality while +common setup/configuration tasks are handled by the bus. + +Bus: +Implements SoundWire Linux Bus which handles the SoundWire protocol. +Programs all the MIPI-defined Slave registers. Represents a SoundWire +Master. Multiple instances of Bus may be present in a system. + +Slave: +Registers as SoundWire Slave device (Linux Device). Multiple Slave devices +can register to a Bus instance. + +Slave driver: +Driver controlling the Slave device. MIPI-specified registers are controlled +directly by the Bus (and transmitted through the Master driver/interface). +Any implementation-defined Slave register is controlled by Slave driver. In +practice, it is expected that the Slave driver relies on regmap and does not +request direct register access. + +Programming interfaces (SoundWire Master interface Driver) +========================================================== + +SoundWire Bus supports programming interfaces for the SoundWire Master +implementation and SoundWire Slave devices. All the code uses the "sdw" +prefix commonly used by SoC designers and 3rd party vendors. + +Each of the SoundWire Master interfaces needs to be registered to the Bus. +Bus implements API to read standard Master MIPI properties and also provides +callback in Master ops for Master driver to implement its own functions that +provides capabilities information. DT support is not implemented at this +time but should be trivial to add since capabilities are enabled with the +``device_property_`` API. + +The Master interface along with the Master interface capabilities are +registered based on board file, DT or ACPI. + +Following is the Bus API to register the SoundWire Bus: + +.. code-block:: c + + int sdw_add_bus_master(struct sdw_bus *bus) + { + if (!bus->dev) + return -ENODEV; + + mutex_init(&bus->lock); + INIT_LIST_HEAD(&bus->slaves); + + /* Check ACPI for Slave devices */ + sdw_acpi_find_slaves(bus); + + /* Check DT for Slave devices */ + sdw_of_find_slaves(bus); + + return 0; + } + +This will initialize sdw_bus object for Master device. "sdw_master_ops" and +"sdw_master_port_ops" callback functions are provided to the Bus. + +"sdw_master_ops" is used by Bus to control the Bus in the hardware specific +way. It includes Bus control functions such as sending the SoundWire +read/write messages on Bus, setting up clock frequency & Stream +Synchronization Point (SSP). The "sdw_master_ops" structure abstracts the +hardware details of the Master from the Bus. + +"sdw_master_port_ops" is used by Bus to setup the Port parameters of the +Master interface Port. Master interface Port register map is not defined by +MIPI specification, so Bus calls the "sdw_master_port_ops" callback +function to do Port operations like "Port Prepare", "Port Transport params +set", "Port enable and disable". The implementation of the Master driver can +then perform hardware-specific configurations. + +Programming interfaces (SoundWire Slave Driver) +=============================================== + +The MIPI specification requires each Slave interface to expose a unique +48-bit identifier, stored in 6 read-only dev_id registers. This dev_id +identifier contains vendor and part information, as well as a field enabling +to differentiate between identical components. An additional class field is +currently unused. Slave driver is written for a specific vendor and part +identifier, Bus enumerates the Slave device based on these two ids. +Slave device and driver match is done based on these two ids . Probe +of the Slave driver is called by Bus on successful match between device and +driver id. A parent/child relationship is enforced between Master and Slave +devices (the logical representation is aligned with the physical +connectivity). + +The information on Master/Slave dependencies is stored in platform data, +board-file, ACPI or DT. The MIPI Software specification defines additional +link_id parameters for controllers that have multiple Master interfaces. The +dev_id registers are only unique in the scope of a link, and the link_id +unique in the scope of a controller. Both dev_id and link_id are not +necessarily unique at the system level but the parent/child information is +used to avoid ambiguity. + +.. code-block:: c + + static const struct sdw_device_id slave_id[] = { + SDW_SLAVE_ENTRY(0x025d, 0x700, 0), + {}, + }; + MODULE_DEVICE_TABLE(sdw, slave_id); + + static struct sdw_driver slave_sdw_driver = { + .driver = { + .name = "slave_xxx", + .pm = &slave_runtime_pm, + }, + .probe = slave_sdw_probe, + .remove = slave_sdw_remove, + .ops = &slave_slave_ops, + .id_table = slave_id, + }; + + +For capabilities, Bus implements API to read standard Slave MIPI properties +and also provides callback in Slave ops for Slave driver to implement own +function that provides capabilities information. Bus needs to know a set of +Slave capabilities to program Slave registers and to control the Bus +reconfigurations. + +Future enhancements to be done +============================== + + (1) Bulk Register Access (BRA) transfers. + + + (2) Multiple data lane support. + +Links +===== + +SoundWire MIPI specification 1.1 is available at: +https://members.mipi.org/wg/All-Members/document/70290 + +SoundWire MIPI DisCo (Discovery and Configuration) specification is +available at: +https://www.mipi.org/specifications/mipi-disco-soundwire + +(publicly accessible with registration or directly accessible to MIPI +members) + +MIPI Alliance Manufacturer ID Page: mid.mipi.org diff --git a/Documentation/driver-api/uio-howto.rst b/Documentation/driver-api/uio-howto.rst index f73d660b2956..693e3bd84e79 100644 --- a/Documentation/driver-api/uio-howto.rst +++ b/Documentation/driver-api/uio-howto.rst @@ -667,27 +667,28 @@ Making the driver recognize the device Since the driver does not declare any device GUID's, it will not get loaded automatically and will not automatically bind to any devices, you must load it and allocate id to the driver yourself. For example, to use -the network device GUID:: +the network device class GUID:: modprobe uio_hv_generic echo "f8615163-df3e-46c5-913f-f2d2f965ed0e" > /sys/bus/vmbus/drivers/uio_hv_generic/new_id If there already is a hardware specific kernel driver for the device, the generic driver still won't bind to it, in this case if you want to -use the generic driver (why would you?) you'll have to manually unbind -the hardware specific driver and bind the generic driver, like this:: +use the generic driver for a userspace library you'll have to manually unbind +the hardware specific driver and bind the generic driver, using the device specific GUID +like this:: - echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 > /sys/bus/vmbus/drivers/hv_netvsc/unbind - echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 > /sys/bus/vmbus/drivers/uio_hv_generic/bind + echo -n ed963694-e847-4b2a-85af-bc9cfc11d6f3 > /sys/bus/vmbus/drivers/hv_netvsc/unbind + echo -n ed963694-e847-4b2a-85af-bc9cfc11d6f3 > /sys/bus/vmbus/drivers/uio_hv_generic/bind You can verify that the device has been bound to the driver by looking for it in sysfs, for example like the following:: - ls -l /sys/bus/vmbus/devices/vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3/driver + ls -l /sys/bus/vmbus/devices/ed963694-e847-4b2a-85af-bc9cfc11d6f3/driver Which if successful should print:: - .../vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3/driver -> ../../../bus/vmbus/drivers/uio_hv_generic + .../ed963694-e847-4b2a-85af-bc9cfc11d6f3/driver -> ../../../bus/vmbus/drivers/uio_hv_generic Things to know about uio_hv_generic ----------------------------------- @@ -697,6 +698,17 @@ prevents the device from generating further interrupts until the bit is cleared. The userspace driver should clear this bit before blocking and waiting for more interrupts. +When host rescinds a device, the interrupt file descriptor is marked down +and any reads of the interrupt file descriptor will return -EIO. Similar +to a closed socket or disconnected serial device. + +The vmbus device regions are mapped into uio device resources: + 0) Channel ring buffers: guest to host and host to guest + 1) Guest to host interrupt signalling pages + 2) Guest to host monitor page + 3) Network receive buffer region + 4) Network send buffer region + Further information =================== diff --git a/Documentation/fpga/fpga-mgr.txt b/Documentation/fpga/fpga-mgr.txt index 78f197fadfd1..cc6413ed6fc9 100644 --- a/Documentation/fpga/fpga-mgr.txt +++ b/Documentation/fpga/fpga-mgr.txt @@ -11,61 +11,65 @@ hidden away in a low level driver which registers a set of ops with the core. The FPGA image data itself is very manufacturer specific, but for our purposes it's just binary data. The FPGA manager core won't parse it. +The FPGA image to be programmed can be in a scatter gather list, a single +contiguous buffer, or a firmware file. Because allocating contiguous kernel +memory for the buffer should be avoided, users are encouraged to use a scatter +gather list instead if possible. + +The particulars for programming the image are presented in a structure (struct +fpga_image_info). This struct contains parameters such as pointers to the +FPGA image as well as image-specific particulars such as whether the image was +built for full or partial reconfiguration. API Functions: ============== -To program the FPGA from a file or from a buffer: -------------------------------------------------- +To program the FPGA: +-------------------- - int fpga_mgr_buf_load(struct fpga_manager *mgr, - struct fpga_image_info *info, - const char *buf, size_t count); + int fpga_mgr_load(struct fpga_manager *mgr, + struct fpga_image_info *info); -Load the FPGA from an image which exists as a contiguous buffer in -memory. Allocating contiguous kernel memory for the buffer should be avoided, -users are encouraged to use the _sg interface instead of this. - - int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, - struct fpga_image_info *info, - struct sg_table *sgt); - -Load the FPGA from an image from non-contiguous in memory. Callers can -construct a sg_table using alloc_page backed memory. - - int fpga_mgr_firmware_load(struct fpga_manager *mgr, - struct fpga_image_info *info, - const char *image_name); - -Load the FPGA from an image which exists as a file. The image file must be on -the firmware search path (see the firmware class documentation). If successful, +Load the FPGA from an image which is indicated in the info. If successful, the FPGA ends up in operating mode. Return 0 on success or a negative error code. -A FPGA design contained in a FPGA image file will likely have particulars that -affect how the image is programmed to the FPGA. These are contained in struct -fpga_image_info. Currently the only such particular is a single flag bit -indicating whether the image is for full or partial reconfiguration. +To allocate or free a struct fpga_image_info: +--------------------------------------------- + + struct fpga_image_info *fpga_image_info_alloc(struct device *dev); + + void fpga_image_info_free(struct fpga_image_info *info); To get/put a reference to a FPGA manager: ----------------------------------------- struct fpga_manager *of_fpga_mgr_get(struct device_node *node); struct fpga_manager *fpga_mgr_get(struct device *dev); - -Given a DT node or device, get an exclusive reference to a FPGA manager. - void fpga_mgr_put(struct fpga_manager *mgr); -Release the reference. +Given a DT node or device, get a reference to a FPGA manager. This pointer +can be saved until you are ready to program the FPGA. fpga_mgr_put releases +the reference. + + +To get exclusive control of a FPGA manager: +------------------------------------------- + + int fpga_mgr_lock(struct fpga_manager *mgr); + void fpga_mgr_unlock(struct fpga_manager *mgr); + +The user should call fpga_mgr_lock and verify that it returns 0 before +attempting to program the FPGA. Likewise, the user should call +fpga_mgr_unlock when done programming the FPGA. To register or unregister the low level FPGA-specific driver: ------------------------------------------------------------- int fpga_mgr_register(struct device *dev, const char *name, - const struct fpga_manager_ops *mops, - void *priv); + const struct fpga_manager_ops *mops, + void *priv); void fpga_mgr_unregister(struct device *dev); @@ -75,62 +79,58 @@ device." How to write an image buffer to a supported FPGA ================================================ -/* Include to get the API */ #include -/* device node that specifies the FPGA manager to use */ -struct device_node *mgr_node = ... - -/* FPGA image is in this buffer. count is size of the buffer. */ -char *buf = ... -int count = ... - -/* struct with information about the FPGA image to program. */ -struct fpga_image_info info; - -/* flags indicates whether to do full or partial reconfiguration */ -info.flags = 0; - +struct fpga_manager *mgr; +struct fpga_image_info *info; int ret; +/* + * Get a reference to FPGA manager. The manager is not locked, so you can + * hold onto this reference without it preventing programming. + * + * This example uses the device node of the manager. Alternatively, use + * fpga_mgr_get(dev) instead if you have the device. + */ +mgr = of_fpga_mgr_get(mgr_node); + +/* struct with information about the FPGA image to program. */ +info = fpga_image_info_alloc(dev); + +/* flags indicates whether to do full or partial reconfiguration */ +info->flags = FPGA_MGR_PARTIAL_RECONFIG; + +/* + * At this point, indicate where the image is. This is pseudo-code; you're + * going to use one of these three. + */ +if (image is in a scatter gather table) { + + info->sgt = [your scatter gather table] + +} else if (image is in a buffer) { + + info->buf = [your image buffer] + info->count = [image buffer size] + +} else if (image is in a firmware file) { + + info->firmware_name = devm_kstrdup(dev, firmware_name, GFP_KERNEL); + +} + /* Get exclusive control of FPGA manager */ -struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node); +ret = fpga_mgr_lock(mgr); /* Load the buffer to the FPGA */ ret = fpga_mgr_buf_load(mgr, &info, buf, count); /* Release the FPGA manager */ +fpga_mgr_unlock(mgr); fpga_mgr_put(mgr); - -How to write an image file to a supported FPGA -============================================== -/* Include to get the API */ -#include - -/* device node that specifies the FPGA manager to use */ -struct device_node *mgr_node = ... - -/* FPGA image is in this file which is in the firmware search path */ -const char *path = "fpga-image-9.rbf" - -/* struct with information about the FPGA image to program. */ -struct fpga_image_info info; - -/* flags indicates whether to do full or partial reconfiguration */ -info.flags = 0; - -int ret; - -/* Get exclusive control of FPGA manager */ -struct fpga_manager *mgr = of_fpga_mgr_get(mgr_node); - -/* Get the firmware image (path) and load it to the FPGA */ -ret = fpga_mgr_firmware_load(mgr, &info, path); - -/* Release the FPGA manager */ -fpga_mgr_put(mgr); - +/* Deallocate the image info if you're done with it */ +fpga_image_info_free(info); How to support a new FPGA device ================================ diff --git a/Documentation/fpga/fpga-region.txt b/Documentation/fpga/fpga-region.txt new file mode 100644 index 000000000000..139a02ba1ff6 --- /dev/null +++ b/Documentation/fpga/fpga-region.txt @@ -0,0 +1,95 @@ +FPGA Regions + +Alan Tull 2017 + +CONTENTS + - Introduction + - The FPGA region API + - Usage example + +Introduction +============ + +This document is meant to be an brief overview of the FPGA region API usage. A +more conceptual look at regions can be found in [1]. + +For the purposes of this API document, let's just say that a region associates +an FPGA Manager and a bridge (or bridges) with a reprogrammable region of an +FPGA or the whole FPGA. The API provides a way to register a region and to +program a region. + +Currently the only layer above fpga-region.c in the kernel is the Device Tree +support (of-fpga-region.c) described in [1]. The DT support layer uses regions +to program the FPGA and then DT to handle enumeration. The common region code +is intended to be used by other schemes that have other ways of accomplishing +enumeration after programming. + +An fpga-region can be set up to know the following things: +* which FPGA manager to use to do the programming +* which bridges to disable before programming and enable afterwards. + +Additional info needed to program the FPGA image is passed in the struct +fpga_image_info [2] including: +* pointers to the image as either a scatter-gather buffer, a contiguous + buffer, or the name of firmware file +* flags indicating specifics such as whether the image if for partial + reconfiguration. + +=================== +The FPGA region API +=================== + +To register or unregister a region: +----------------------------------- + + int fpga_region_register(struct device *dev, + struct fpga_region *region); + int fpga_region_unregister(struct fpga_region *region); + +An example of usage can be seen in the probe function of [3] + +To program an FPGA: +------------------- + int fpga_region_program_fpga(struct fpga_region *region); + +This function operates on info passed in the fpga_image_info +(region->info). + +This function will attempt to: + * lock the region's mutex + * lock the region's FPGA manager + * build a list of FPGA bridges if a method has been specified to do so + * disable the bridges + * program the FPGA + * re-enable the bridges + * release the locks + +============= +Usage example +============= + +First, allocate the info struct: + + info = fpga_image_info_alloc(dev); + if (!info) + return -ENOMEM; + +Set flags as needed, i.e. + + info->flags |= FPGA_MGR_PARTIAL_RECONFIG; + +Point to your FPGA image, such as: + + info->sgt = &sgt; + +Add info to region and do the programming: + + region->info = info; + ret = fpga_region_program_fpga(region); + +Then enumerate whatever hardware has appeared in the FPGA. + +-- +[1] ../devicetree/bindings/fpga/fpga-region.txt +[2] ./fpga-mgr.txt +[3] ../../drivers/fpga/of-fpga-region.c diff --git a/Documentation/fpga/overview.txt b/Documentation/fpga/overview.txt new file mode 100644 index 000000000000..0f1236e7e675 --- /dev/null +++ b/Documentation/fpga/overview.txt @@ -0,0 +1,23 @@ +Linux kernel FPGA support + +Alan Tull 2017 + +The main point of this project has been to separate the out the upper layers +that know when to reprogram a FPGA from the lower layers that know how to +reprogram a specific FPGA device. The intention is to make this manufacturer +agnostic, understanding that of course the FPGA images are very device specific +themselves. + +The framework in the kernel includes: +* low level FPGA manager drivers that know how to program a specific device +* the fpga-mgr framework they are registered with +* low level FPGA bridge drivers for hard/soft bridges which are intended to + be disable during FPGA programming +* the fpga-bridge framework they are registered with +* the fpga-region framework which associates and controls managers and bridges + as reconfigurable regions +* the of-fpga-region support for reprogramming FPGAs when device tree overlays + are applied. + +I would encourage you the user to add code that creates FPGA regions rather +that trying to control managers and bridges separately. diff --git a/MAINTAINERS b/MAINTAINERS index 64c47587d1d4..a2a25331e3b1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3421,8 +3421,8 @@ M: Arnd Bergmann M: Greg Kroah-Hartman T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git S: Supported -F: drivers/char/* -F: drivers/misc/* +F: drivers/char/ +F: drivers/misc/ F: include/linux/miscdevice.h CHECKPATCH @@ -12526,6 +12526,13 @@ F: lib/siphash.c F: lib/test_siphash.c F: include/linux/siphash.h +SIOX +M: Gavin Schenk +M: Uwe Kleine-König +S: Supported +F: drivers/siox/* +F: include/trace/events/siox.h + SIS 190 ETHERNET DRIVER M: Francois Romieu L: netdev@vger.kernel.org @@ -12577,6 +12584,14 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git F: include/linux/srcu.h F: kernel/rcu/srcu.c +SERIAL LOW-POWER INTER-CHIP MEDIA BUS (SLIMbus) +M: Srinivas Kandagatla +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Maintained +F: drivers/slimbus/ +F: Documentation/devicetree/bindings/slimbus/ +F: include/linux/slimbus.h + SMACK SECURITY MODULE M: Casey Schaufler L: linux-security-module@vger.kernel.org @@ -12802,6 +12817,16 @@ F: Documentation/sound/alsa/soc/ F: sound/soc/ F: include/sound/soc* +SOUNDWIRE SUBSYSTEM +M: Vinod Koul +M: Sanyog Kale +R: Pierre-Louis Bossart +L: alsa-devel@alsa-project.org (moderated for non-subscribers) +S: Supported +F: Documentation/driver-api/soundwire/ +F: drivers/soundwire/ +F: include/linux/soundwire/ + SP2 MEDIA DRIVER M: Olli Salonen L: linux-media@vger.kernel.org @@ -14672,6 +14697,15 @@ S: Maintained F: drivers/virtio/virtio_input.c F: include/uapi/linux/virtio_input.h +VIRTUAL BOX GUEST DEVICE DRIVER +M: Hans de Goede +M: Arnd Bergmann +M: Greg Kroah-Hartman +S: Maintained +F: include/linux/vbox_utils.h +F: include/uapi/linux/vbox*.h +F: drivers/virt/vboxguest/ + VIRTUAL SERIO DEVICE DRIVER M: Stephen Chandler Paul S: Maintained diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index 189a398290db..a0a206556919 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -239,17 +239,24 @@ void hyperv_report_panic(struct pt_regs *regs, long err) } EXPORT_SYMBOL_GPL(hyperv_report_panic); -bool hv_is_hypercall_page_setup(void) +bool hv_is_hyperv_initialized(void) { union hv_x64_msr_hypercall_contents hypercall_msr; - /* Check if the hypercall page is setup */ + /* + * Ensure that we're really on Hyper-V, and not a KVM or Xen + * emulation of Hyper-V + */ + if (x86_hyper_type != X86_HYPER_MS_HYPERV) + return false; + + /* + * Verify that earlier initialization succeeded by checking + * that the hypercall page is setup + */ hypercall_msr.as_uint64 = 0; rdmsrl(HV_X64_MSR_HYPERCALL, hypercall_msr.as_uint64); - if (!hypercall_msr.enable) - return false; - - return true; + return hypercall_msr.enable; } -EXPORT_SYMBOL_GPL(hv_is_hypercall_page_setup); +EXPORT_SYMBOL_GPL(hv_is_hyperv_initialized); diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h index 8bf450b13d9f..b52af150cbd8 100644 --- a/arch/x86/include/asm/mshyperv.h +++ b/arch/x86/include/asm/mshyperv.h @@ -314,11 +314,11 @@ void hyperv_init(void); void hyperv_setup_mmu_ops(void); void hyper_alloc_mmu(void); void hyperv_report_panic(struct pt_regs *regs, long err); -bool hv_is_hypercall_page_setup(void); +bool hv_is_hyperv_initialized(void); void hyperv_cleanup(void); #else /* CONFIG_HYPERV */ static inline void hyperv_init(void) {} -static inline bool hv_is_hypercall_page_setup(void) { return false; } +static inline bool hv_is_hyperv_initialized(void) { return false; } static inline void hyperv_cleanup(void) {} static inline void hyperv_setup_mmu_ops(void) {} #endif /* CONFIG_HYPERV */ diff --git a/drivers/Kconfig b/drivers/Kconfig index ef5fb8395d76..879dc0604cba 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -153,6 +153,8 @@ source "drivers/remoteproc/Kconfig" source "drivers/rpmsg/Kconfig" +source "drivers/soundwire/Kconfig" + source "drivers/soc/Kconfig" source "drivers/devfreq/Kconfig" @@ -213,4 +215,8 @@ source "drivers/opp/Kconfig" source "drivers/visorbus/Kconfig" +source "drivers/siox/Kconfig" + +source "drivers/slimbus/Kconfig" + endmenu diff --git a/drivers/Makefile b/drivers/Makefile index 7a2330077e47..7a0438744053 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -87,6 +87,7 @@ obj-$(CONFIG_MTD) += mtd/ obj-$(CONFIG_SPI) += spi/ obj-$(CONFIG_SPMI) += spmi/ obj-$(CONFIG_HSI) += hsi/ +obj-$(CONFIG_SLIMBUS) += slimbus/ obj-y += net/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ @@ -157,6 +158,7 @@ obj-$(CONFIG_MAILBOX) += mailbox/ obj-$(CONFIG_HWSPINLOCK) += hwspinlock/ obj-$(CONFIG_REMOTEPROC) += remoteproc/ obj-$(CONFIG_RPMSG) += rpmsg/ +obj-$(CONFIG_SOUNDWIRE) += soundwire/ # Virtualization drivers obj-$(CONFIG_VIRT_DRIVERS) += virt/ @@ -185,3 +187,4 @@ obj-$(CONFIG_FSI) += fsi/ obj-$(CONFIG_TEE) += tee/ obj-$(CONFIG_MULTIPLEXER) += mux/ obj-$(CONFIG_UNISYS_VISORBUS) += visorbus/ +obj-$(CONFIG_SIOX) += siox/ diff --git a/drivers/android/binder.c b/drivers/android/binder.c index cc89d0d2b965..d21040c5d343 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -141,7 +141,7 @@ enum { }; static uint32_t binder_debug_mask = BINDER_DEBUG_USER_ERROR | BINDER_DEBUG_FAILED_TRANSACTION | BINDER_DEBUG_DEAD_TRANSACTION; -module_param_named(debug_mask, binder_debug_mask, uint, S_IWUSR | S_IRUGO); +module_param_named(debug_mask, binder_debug_mask, uint, 0644); static char *binder_devices_param = CONFIG_ANDROID_BINDER_DEVICES; module_param_named(devices, binder_devices_param, charp, 0444); @@ -160,7 +160,7 @@ static int binder_set_stop_on_user_error(const char *val, return ret; } module_param_call(stop_on_user_error, binder_set_stop_on_user_error, - param_get_int, &binder_stop_on_user_error, S_IWUSR | S_IRUGO); + param_get_int, &binder_stop_on_user_error, 0644); #define binder_debug(mask, x...) \ do { \ @@ -249,7 +249,7 @@ static struct binder_transaction_log_entry *binder_transaction_log_add( unsigned int cur = atomic_inc_return(&log->cur); if (cur >= ARRAY_SIZE(log->entry)) - log->full = 1; + log->full = true; e = &log->entry[cur % ARRAY_SIZE(log->entry)]; WRITE_ONCE(e->debug_id_done, 0); /* @@ -493,8 +493,6 @@ enum binder_deferred_state { * (protected by @inner_lock) * @todo: list of work for this process * (protected by @inner_lock) - * @wait: wait queue head to wait for proc work - * (invariant after initialized) * @stats: per-process binder statistics * (atomics, no lock needed) * @delivered_death: list of delivered death notification @@ -537,7 +535,6 @@ struct binder_proc { bool is_dead; struct list_head todo; - wait_queue_head_t wait; struct binder_stats stats; struct list_head delivered_death; int max_threads; @@ -579,6 +576,8 @@ enum { * (protected by @proc->inner_lock) * @todo: list of work to do for this thread * (protected by @proc->inner_lock) + * @process_todo: whether work in @todo should be processed + * (protected by @proc->inner_lock) * @return_error: transaction errors reported by this thread * (only accessed by this thread) * @reply_error: transaction errors reported by target thread @@ -604,6 +603,7 @@ struct binder_thread { bool looper_need_return; /* can be written by other thread */ struct binder_transaction *transaction_stack; struct list_head todo; + bool process_todo; struct binder_error return_error; struct binder_error reply_error; wait_queue_head_t wait; @@ -789,6 +789,16 @@ static bool binder_worklist_empty(struct binder_proc *proc, return ret; } +/** + * binder_enqueue_work_ilocked() - Add an item to the work list + * @work: struct binder_work to add to list + * @target_list: list to add work to + * + * Adds the work to the specified list. Asserts that work + * is not already on a list. + * + * Requires the proc->inner_lock to be held. + */ static void binder_enqueue_work_ilocked(struct binder_work *work, struct list_head *target_list) @@ -799,22 +809,56 @@ binder_enqueue_work_ilocked(struct binder_work *work, } /** - * binder_enqueue_work() - Add an item to the work list - * @proc: binder_proc associated with list + * binder_enqueue_deferred_thread_work_ilocked() - Add deferred thread work + * @thread: thread to queue work to * @work: struct binder_work to add to list - * @target_list: list to add work to * - * Adds the work to the specified list. Asserts that work - * is not already on a list. + * Adds the work to the todo list of the thread. Doesn't set the process_todo + * flag, which means that (if it wasn't already set) the thread will go to + * sleep without handling this work when it calls read. + * + * Requires the proc->inner_lock to be held. */ static void -binder_enqueue_work(struct binder_proc *proc, - struct binder_work *work, - struct list_head *target_list) +binder_enqueue_deferred_thread_work_ilocked(struct binder_thread *thread, + struct binder_work *work) { - binder_inner_proc_lock(proc); - binder_enqueue_work_ilocked(work, target_list); - binder_inner_proc_unlock(proc); + binder_enqueue_work_ilocked(work, &thread->todo); +} + +/** + * binder_enqueue_thread_work_ilocked() - Add an item to the thread work list + * @thread: thread to queue work to + * @work: struct binder_work to add to list + * + * Adds the work to the todo list of the thread, and enables processing + * of the todo queue. + * + * Requires the proc->inner_lock to be held. + */ +static void +binder_enqueue_thread_work_ilocked(struct binder_thread *thread, + struct binder_work *work) +{ + binder_enqueue_work_ilocked(work, &thread->todo); + thread->process_todo = true; +} + +/** + * binder_enqueue_thread_work() - Add an item to the thread work list + * @thread: thread to queue work to + * @work: struct binder_work to add to list + * + * Adds the work to the todo list of the thread, and enables processing + * of the todo queue. + */ +static void +binder_enqueue_thread_work(struct binder_thread *thread, + struct binder_work *work) +{ + binder_inner_proc_lock(thread->proc); + binder_enqueue_thread_work_ilocked(thread, work); + binder_inner_proc_unlock(thread->proc); } static void @@ -940,7 +984,7 @@ err: static bool binder_has_work_ilocked(struct binder_thread *thread, bool do_proc_work) { - return !binder_worklist_empty_ilocked(&thread->todo) || + return thread->process_todo || thread->looper_need_return || (do_proc_work && !binder_worklist_empty_ilocked(&thread->proc->todo)); @@ -1228,6 +1272,17 @@ static int binder_inc_node_nilocked(struct binder_node *node, int strong, node->local_strong_refs++; if (!node->has_strong_ref && target_list) { binder_dequeue_work_ilocked(&node->work); + /* + * Note: this function is the only place where we queue + * directly to a thread->todo without using the + * corresponding binder_enqueue_thread_work() helper + * functions; in this case it's ok to not set the + * process_todo flag, since we know this node work will + * always be followed by other work that starts queue + * processing: in case of synchronous transactions, a + * BR_REPLY or BR_ERROR; in case of oneway + * transactions, a BR_TRANSACTION_COMPLETE. + */ binder_enqueue_work_ilocked(&node->work, target_list); } } else { @@ -1239,6 +1294,9 @@ static int binder_inc_node_nilocked(struct binder_node *node, int strong, node->debug_id); return -EINVAL; } + /* + * See comment above + */ binder_enqueue_work_ilocked(&node->work, target_list); } } @@ -1928,9 +1986,9 @@ static void binder_send_failed_reply(struct binder_transaction *t, binder_pop_transaction_ilocked(target_thread, t); if (target_thread->reply_error.cmd == BR_OK) { target_thread->reply_error.cmd = error_code; - binder_enqueue_work_ilocked( - &target_thread->reply_error.work, - &target_thread->todo); + binder_enqueue_thread_work_ilocked( + target_thread, + &target_thread->reply_error.work); wake_up_interruptible(&target_thread->wait); } else { WARN(1, "Unexpected reply error: %u\n", @@ -2569,20 +2627,18 @@ static bool binder_proc_transaction(struct binder_transaction *t, struct binder_proc *proc, struct binder_thread *thread) { - struct list_head *target_list = NULL; struct binder_node *node = t->buffer->target_node; bool oneway = !!(t->flags & TF_ONE_WAY); - bool wakeup = true; + bool pending_async = false; BUG_ON(!node); binder_node_lock(node); if (oneway) { BUG_ON(thread); if (node->has_async_transaction) { - target_list = &node->async_todo; - wakeup = false; + pending_async = true; } else { - node->has_async_transaction = 1; + node->has_async_transaction = true; } } @@ -2594,19 +2650,17 @@ static bool binder_proc_transaction(struct binder_transaction *t, return false; } - if (!thread && !target_list) + if (!thread && !pending_async) thread = binder_select_thread_ilocked(proc); if (thread) - target_list = &thread->todo; - else if (!target_list) - target_list = &proc->todo; + binder_enqueue_thread_work_ilocked(thread, &t->work); + else if (!pending_async) + binder_enqueue_work_ilocked(&t->work, &proc->todo); else - BUG_ON(target_list != &node->async_todo); + binder_enqueue_work_ilocked(&t->work, &node->async_todo); - binder_enqueue_work_ilocked(&t->work, target_list); - - if (wakeup) + if (!pending_async) binder_wakeup_thread_ilocked(proc, thread, !oneway /* sync */); binder_inner_proc_unlock(proc); @@ -3101,10 +3155,10 @@ static void binder_transaction(struct binder_proc *proc, } } tcomplete->type = BINDER_WORK_TRANSACTION_COMPLETE; - binder_enqueue_work(proc, tcomplete, &thread->todo); t->work.type = BINDER_WORK_TRANSACTION; if (reply) { + binder_enqueue_thread_work(thread, tcomplete); binder_inner_proc_lock(target_proc); if (target_thread->is_dead) { binder_inner_proc_unlock(target_proc); @@ -3112,13 +3166,21 @@ static void binder_transaction(struct binder_proc *proc, } BUG_ON(t->buffer->async_transaction != 0); binder_pop_transaction_ilocked(target_thread, in_reply_to); - binder_enqueue_work_ilocked(&t->work, &target_thread->todo); + binder_enqueue_thread_work_ilocked(target_thread, &t->work); binder_inner_proc_unlock(target_proc); wake_up_interruptible_sync(&target_thread->wait); binder_free_transaction(in_reply_to); } else if (!(t->flags & TF_ONE_WAY)) { BUG_ON(t->buffer->async_transaction != 0); binder_inner_proc_lock(proc); + /* + * Defer the TRANSACTION_COMPLETE, so we don't return to + * userspace immediately; this allows the target process to + * immediately start processing this transaction, reducing + * latency. We will then return the TRANSACTION_COMPLETE when + * the target replies (or there is an error). + */ + binder_enqueue_deferred_thread_work_ilocked(thread, tcomplete); t->need_reply = 1; t->from_parent = thread->transaction_stack; thread->transaction_stack = t; @@ -3132,6 +3194,7 @@ static void binder_transaction(struct binder_proc *proc, } else { BUG_ON(target_node == NULL); BUG_ON(t->buffer->async_transaction != 1); + binder_enqueue_thread_work(thread, tcomplete); if (!binder_proc_transaction(t, target_proc, NULL)) goto err_dead_proc_or_thread; } @@ -3210,15 +3273,11 @@ err_invalid_target_handle: BUG_ON(thread->return_error.cmd != BR_OK); if (in_reply_to) { thread->return_error.cmd = BR_TRANSACTION_COMPLETE; - binder_enqueue_work(thread->proc, - &thread->return_error.work, - &thread->todo); + binder_enqueue_thread_work(thread, &thread->return_error.work); binder_send_failed_reply(in_reply_to, return_error); } else { thread->return_error.cmd = return_error; - binder_enqueue_work(thread->proc, - &thread->return_error.work, - &thread->todo); + binder_enqueue_thread_work(thread, &thread->return_error.work); } } @@ -3424,7 +3483,7 @@ static int binder_thread_write(struct binder_proc *proc, w = binder_dequeue_work_head_ilocked( &buf_node->async_todo); if (!w) { - buf_node->has_async_transaction = 0; + buf_node->has_async_transaction = false; } else { binder_enqueue_work_ilocked( w, &proc->todo); @@ -3522,10 +3581,9 @@ static int binder_thread_write(struct binder_proc *proc, WARN_ON(thread->return_error.cmd != BR_OK); thread->return_error.cmd = BR_ERROR; - binder_enqueue_work( - thread->proc, - &thread->return_error.work, - &thread->todo); + binder_enqueue_thread_work( + thread, + &thread->return_error.work); binder_debug( BINDER_DEBUG_FAILED_TRANSACTION, "%d:%d BC_REQUEST_DEATH_NOTIFICATION failed\n", @@ -3605,9 +3663,9 @@ static int binder_thread_write(struct binder_proc *proc, if (thread->looper & (BINDER_LOOPER_STATE_REGISTERED | BINDER_LOOPER_STATE_ENTERED)) - binder_enqueue_work_ilocked( - &death->work, - &thread->todo); + binder_enqueue_thread_work_ilocked( + thread, + &death->work); else { binder_enqueue_work_ilocked( &death->work, @@ -3662,8 +3720,8 @@ static int binder_thread_write(struct binder_proc *proc, if (thread->looper & (BINDER_LOOPER_STATE_REGISTERED | BINDER_LOOPER_STATE_ENTERED)) - binder_enqueue_work_ilocked( - &death->work, &thread->todo); + binder_enqueue_thread_work_ilocked( + thread, &death->work); else { binder_enqueue_work_ilocked( &death->work, @@ -3837,6 +3895,8 @@ retry: break; } w = binder_dequeue_work_head_ilocked(list); + if (binder_worklist_empty_ilocked(&thread->todo)) + thread->process_todo = false; switch (w->type) { case BINDER_WORK_TRANSACTION: { @@ -4302,6 +4362,18 @@ static int binder_thread_release(struct binder_proc *proc, if (t) spin_lock(&t->lock); } + + /* + * If this thread used poll, make sure we remove the waitqueue + * from any epoll data structures holding it with POLLFREE. + * waitqueue_active() is safe to use here because we're holding + * the inner lock. + */ + if ((thread->looper & BINDER_LOOPER_STATE_POLL) && + waitqueue_active(&thread->wait)) { + wake_up_poll(&thread->wait, POLLHUP | POLLFREE); + } + binder_inner_proc_unlock(thread->proc); if (send_reply) @@ -4646,7 +4718,7 @@ static int binder_mmap(struct file *filp, struct vm_area_struct *vma) return 0; err_bad_arg: - pr_err("binder_mmap: %d %lx-%lx %s failed %d\n", + pr_err("%s: %d %lx-%lx %s failed %d\n", __func__, proc->pid, vma->vm_start, vma->vm_end, failure_string, ret); return ret; } @@ -4656,7 +4728,7 @@ static int binder_open(struct inode *nodp, struct file *filp) struct binder_proc *proc; struct binder_device *binder_dev; - binder_debug(BINDER_DEBUG_OPEN_CLOSE, "binder_open: %d:%d\n", + binder_debug(BINDER_DEBUG_OPEN_CLOSE, "%s: %d:%d\n", __func__, current->group_leader->pid, current->pid); proc = kzalloc(sizeof(*proc), GFP_KERNEL); @@ -4695,7 +4767,7 @@ static int binder_open(struct inode *nodp, struct file *filp) * anyway print all contexts that a given PID has, so this * is not a problem. */ - proc->debugfs_entry = debugfs_create_file(strbuf, S_IRUGO, + proc->debugfs_entry = debugfs_create_file(strbuf, 0444, binder_debugfs_dir_entry_proc, (void *)(unsigned long)proc->pid, &binder_proc_fops); @@ -5524,7 +5596,9 @@ static int __init binder_init(void) struct binder_device *device; struct hlist_node *tmp; - binder_alloc_shrinker_init(); + ret = binder_alloc_shrinker_init(); + if (ret) + return ret; atomic_set(&binder_transaction_log.cur, ~0U); atomic_set(&binder_transaction_log_failed.cur, ~0U); @@ -5536,27 +5610,27 @@ static int __init binder_init(void) if (binder_debugfs_dir_entry_root) { debugfs_create_file("state", - S_IRUGO, + 0444, binder_debugfs_dir_entry_root, NULL, &binder_state_fops); debugfs_create_file("stats", - S_IRUGO, + 0444, binder_debugfs_dir_entry_root, NULL, &binder_stats_fops); debugfs_create_file("transactions", - S_IRUGO, + 0444, binder_debugfs_dir_entry_root, NULL, &binder_transactions_fops); debugfs_create_file("transaction_log", - S_IRUGO, + 0444, binder_debugfs_dir_entry_root, &binder_transaction_log, &binder_transaction_log_fops); debugfs_create_file("failed_transaction_log", - S_IRUGO, + 0444, binder_debugfs_dir_entry_root, &binder_transaction_log_failed, &binder_transaction_log_fops); diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index 6f6f745605af..5a426c877dfb 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -281,6 +281,9 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate, goto err_vm_insert_page_failed; } + if (index + 1 > alloc->pages_high) + alloc->pages_high = index + 1; + trace_binder_alloc_page_end(alloc, index); /* vm_insert_page does not seem to increment the refcount */ } @@ -324,11 +327,12 @@ err_no_vma: return vma ? -ENOMEM : -ESRCH; } -struct binder_buffer *binder_alloc_new_buf_locked(struct binder_alloc *alloc, - size_t data_size, - size_t offsets_size, - size_t extra_buffers_size, - int is_async) +static struct binder_buffer *binder_alloc_new_buf_locked( + struct binder_alloc *alloc, + size_t data_size, + size_t offsets_size, + size_t extra_buffers_size, + int is_async) { struct rb_node *n = alloc->free_buffers.rb_node; struct binder_buffer *buffer; @@ -666,7 +670,7 @@ int binder_alloc_mmap_handler(struct binder_alloc *alloc, goto err_already_mapped; } - area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP); + area = get_vm_area(vma->vm_end - vma->vm_start, VM_ALLOC); if (area == NULL) { ret = -ENOMEM; failure_string = "get_vm_area"; @@ -853,6 +857,7 @@ void binder_alloc_print_pages(struct seq_file *m, } mutex_unlock(&alloc->mutex); seq_printf(m, " pages: %d:%d:%d\n", active, lru, free); + seq_printf(m, " pages high watermark: %zu\n", alloc->pages_high); } /** @@ -1002,8 +1007,14 @@ void binder_alloc_init(struct binder_alloc *alloc) INIT_LIST_HEAD(&alloc->buffers); } -void binder_alloc_shrinker_init(void) +int binder_alloc_shrinker_init(void) { - list_lru_init(&binder_alloc_lru); - register_shrinker(&binder_shrinker); + int ret = list_lru_init(&binder_alloc_lru); + + if (ret == 0) { + ret = register_shrinker(&binder_shrinker); + if (ret) + list_lru_destroy(&binder_alloc_lru); + } + return ret; } diff --git a/drivers/android/binder_alloc.h b/drivers/android/binder_alloc.h index 2dd33b6df104..9ef64e563856 100644 --- a/drivers/android/binder_alloc.h +++ b/drivers/android/binder_alloc.h @@ -92,6 +92,7 @@ struct binder_lru_page { * @pages: array of binder_lru_page * @buffer_size: size of address space specified via mmap * @pid: pid for associated binder_proc (invariant after init) + * @pages_high: high watermark of offset in @pages * * Bookkeeping structure for per-proc address space management for binder * buffers. It is normally initialized during binder_init() and binder_mmap() @@ -112,6 +113,7 @@ struct binder_alloc { size_t buffer_size; uint32_t buffer_free; int pid; + size_t pages_high; }; #ifdef CONFIG_ANDROID_BINDER_IPC_SELFTEST @@ -128,7 +130,7 @@ extern struct binder_buffer *binder_alloc_new_buf(struct binder_alloc *alloc, size_t extra_buffers_size, int is_async); extern void binder_alloc_init(struct binder_alloc *alloc); -void binder_alloc_shrinker_init(void); +extern int binder_alloc_shrinker_init(void); extern void binder_alloc_vma_close(struct binder_alloc *alloc); extern struct binder_buffer * binder_alloc_prepare_to_free(struct binder_alloc *alloc, diff --git a/drivers/auxdisplay/img-ascii-lcd.c b/drivers/auxdisplay/img-ascii-lcd.c index db040b378224..9180b9bd5821 100644 --- a/drivers/auxdisplay/img-ascii-lcd.c +++ b/drivers/auxdisplay/img-ascii-lcd.c @@ -441,3 +441,7 @@ static struct platform_driver img_ascii_lcd_driver = { .remove = img_ascii_lcd_remove, }; module_platform_driver(img_ascii_lcd_driver); + +MODULE_DESCRIPTION("Imagination Technologies ASCII LCD Display"); +MODULE_AUTHOR("Paul Burton "); +MODULE_LICENSE("GPL"); diff --git a/drivers/base/regmap/Kconfig b/drivers/base/regmap/Kconfig index 067073e4beb1..aff34c0c2a3e 100644 --- a/drivers/base/regmap/Kconfig +++ b/drivers/base/regmap/Kconfig @@ -20,6 +20,10 @@ config REGMAP_I2C tristate depends on I2C +config REGMAP_SLIMBUS + tristate + depends on SLIMBUS + config REGMAP_SPI tristate depends on SPI diff --git a/drivers/base/regmap/Makefile b/drivers/base/regmap/Makefile index 22d263cca395..5ed0023fabda 100644 --- a/drivers/base/regmap/Makefile +++ b/drivers/base/regmap/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_REGCACHE_COMPRESSED) += regcache-lzo.o obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o +obj-$(CONFIG_REGMAP_SLIMBUS) += regmap-slimbus.o obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o obj-$(CONFIG_REGMAP_MMIO) += regmap-mmio.o diff --git a/drivers/base/regmap/regmap-slimbus.c b/drivers/base/regmap/regmap-slimbus.c new file mode 100644 index 000000000000..c90bee81d954 --- /dev/null +++ b/drivers/base/regmap/regmap-slimbus.c @@ -0,0 +1,80 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017, Linaro Ltd. + +#include +#include +#include + +#include "internal.h" + +static int regmap_slimbus_byte_reg_read(void *context, unsigned int reg, + unsigned int *val) +{ + struct slim_device *sdev = context; + int v; + + v = slim_readb(sdev, reg); + + if (v < 0) + return v; + + *val = v; + + return 0; +} + +static int regmap_slimbus_byte_reg_write(void *context, unsigned int reg, + unsigned int val) +{ + struct slim_device *sdev = context; + + return slim_writeb(sdev, reg, val); +} + +static struct regmap_bus regmap_slimbus_bus = { + .reg_write = regmap_slimbus_byte_reg_write, + .reg_read = regmap_slimbus_byte_reg_read, + .reg_format_endian_default = REGMAP_ENDIAN_LITTLE, + .val_format_endian_default = REGMAP_ENDIAN_LITTLE, +}; + +static const struct regmap_bus *regmap_get_slimbus(struct slim_device *slim, + const struct regmap_config *config) +{ + if (config->val_bits == 8 && config->reg_bits == 8) + return ®map_slimbus_bus; + + return ERR_PTR(-ENOTSUPP); +} + +struct regmap *__regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) +{ + const struct regmap_bus *bus = regmap_get_slimbus(slimbus, config); + + if (IS_ERR(bus)) + return ERR_CAST(bus); + + return __regmap_init(&slimbus->dev, bus, &slimbus->dev, config, + lock_key, lock_name); +} +EXPORT_SYMBOL_GPL(__regmap_init_slimbus); + +struct regmap *__devm_regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name) +{ + const struct regmap_bus *bus = regmap_get_slimbus(slimbus, config); + + if (IS_ERR(bus)) + return ERR_CAST(bus); + + return __devm_regmap_init(&slimbus->dev, bus, &slimbus, config, + lock_key, lock_name); +} +EXPORT_SYMBOL_GPL(__devm_regmap_init_slimbus); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/char/lp.c b/drivers/char/lp.c index 8249762192d5..8c4dd1a3bb6a 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -659,17 +659,31 @@ static int lp_do_ioctl(unsigned int minor, unsigned int cmd, return retval; } -static int lp_set_timeout(unsigned int minor, struct timeval *par_timeout) +static int lp_set_timeout(unsigned int minor, s64 tv_sec, long tv_usec) { long to_jiffies; /* Convert to jiffies, place in lp_table */ - if ((par_timeout->tv_sec < 0) || - (par_timeout->tv_usec < 0)) { + if (tv_sec < 0 || tv_usec < 0) return -EINVAL; + + /* + * we used to not check, so let's not make this fatal, + * but deal with user space passing a 32-bit tv_nsec in + * a 64-bit field, capping the timeout to 1 second + * worth of microseconds, and capping the total at + * MAX_JIFFY_OFFSET. + */ + if (tv_usec > 999999) + tv_usec = 999999; + + if (tv_sec >= MAX_SEC_IN_JIFFIES - 1) { + to_jiffies = MAX_JIFFY_OFFSET; + } else { + to_jiffies = DIV_ROUND_UP(tv_usec, 1000000/HZ); + to_jiffies += tv_sec * (long) HZ; } - to_jiffies = DIV_ROUND_UP(par_timeout->tv_usec, 1000000/HZ); - to_jiffies += par_timeout->tv_sec * (long) HZ; + if (to_jiffies <= 0) { return -EINVAL; } @@ -677,23 +691,43 @@ static int lp_set_timeout(unsigned int minor, struct timeval *par_timeout) return 0; } +static int lp_set_timeout32(unsigned int minor, void __user *arg) +{ + s32 karg[2]; + + if (copy_from_user(karg, arg, sizeof(karg))) + return -EFAULT; + + return lp_set_timeout(minor, karg[0], karg[1]); +} + +static int lp_set_timeout64(unsigned int minor, void __user *arg) +{ + s64 karg[2]; + + if (copy_from_user(karg, arg, sizeof(karg))) + return -EFAULT; + + return lp_set_timeout(minor, karg[0], karg[1]); +} + static long lp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { unsigned int minor; - struct timeval par_timeout; int ret; minor = iminor(file_inode(file)); mutex_lock(&lp_mutex); switch (cmd) { - case LPSETTIMEOUT: - if (copy_from_user(&par_timeout, (void __user *)arg, - sizeof (struct timeval))) { - ret = -EFAULT; + case LPSETTIMEOUT_OLD: + if (BITS_PER_LONG == 32) { + ret = lp_set_timeout32(minor, (void __user *)arg); break; } - ret = lp_set_timeout(minor, &par_timeout); + /* fallthrough for 64-bit */ + case LPSETTIMEOUT_NEW: + ret = lp_set_timeout64(minor, (void __user *)arg); break; default: ret = lp_do_ioctl(minor, cmd, arg, (void __user *)arg); @@ -709,18 +743,19 @@ static long lp_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { unsigned int minor; - struct timeval par_timeout; int ret; minor = iminor(file_inode(file)); mutex_lock(&lp_mutex); switch (cmd) { - case LPSETTIMEOUT: - if (compat_get_timeval(&par_timeout, compat_ptr(arg))) { - ret = -EFAULT; + case LPSETTIMEOUT_OLD: + if (!COMPAT_USE_64BIT_TIME) { + ret = lp_set_timeout32(minor, (void __user *)arg); break; } - ret = lp_set_timeout(minor, &par_timeout); + /* fallthrough for x32 mode */ + case LPSETTIMEOUT_NEW: + ret = lp_set_timeout64(minor, (void __user *)arg); break; #ifdef LP_STATS case LPGETSTATS: @@ -865,7 +900,7 @@ static int __init lp_setup (char *str) printk(KERN_INFO "lp: too many ports, %s ignored.\n", str); } else if (!strcmp(str, "reset")) { - reset = 1; + reset = true; } return 1; } diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 6aefe5370e5b..052011bcf100 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -107,6 +107,8 @@ static ssize_t read_mem(struct file *file, char __user *buf, phys_addr_t p = *ppos; ssize_t read, sz; void *ptr; + char *bounce; + int err; if (p != *ppos) return 0; @@ -129,15 +131,22 @@ static ssize_t read_mem(struct file *file, char __user *buf, } #endif + bounce = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!bounce) + return -ENOMEM; + while (count > 0) { unsigned long remaining; int allowed; sz = size_inside_page(p, count); + err = -EPERM; allowed = page_is_allowed(p >> PAGE_SHIFT); if (!allowed) - return -EPERM; + goto failed; + + err = -EFAULT; if (allowed == 2) { /* Show zeros for restricted memory. */ remaining = clear_user(buf, sz); @@ -149,24 +158,32 @@ static ssize_t read_mem(struct file *file, char __user *buf, */ ptr = xlate_dev_mem_ptr(p); if (!ptr) - return -EFAULT; - - remaining = copy_to_user(buf, ptr, sz); + goto failed; + err = probe_kernel_read(bounce, ptr, sz); unxlate_dev_mem_ptr(p, ptr); + if (err) + goto failed; + + remaining = copy_to_user(buf, bounce, sz); } if (remaining) - return -EFAULT; + goto failed; buf += sz; p += sz; count -= sz; read += sz; } + kfree(bounce); *ppos += read; return read; + +failed: + kfree(bounce); + return err; } static ssize_t write_mem(struct file *file, const char __user *buf, diff --git a/drivers/char/xillybus/Kconfig b/drivers/char/xillybus/Kconfig index b302684d86c1..a1f16df08d32 100644 --- a/drivers/char/xillybus/Kconfig +++ b/drivers/char/xillybus/Kconfig @@ -4,7 +4,7 @@ config XILLYBUS tristate "Xillybus generic FPGA interface" - depends on PCI || (OF_ADDRESS && OF_IRQ) + depends on PCI || OF select CRC32 help Xillybus is a generic interface for peripherals designed on @@ -24,7 +24,7 @@ config XILLYBUS_PCIE config XILLYBUS_OF tristate "Xillybus over Device Tree" - depends on OF_ADDRESS && OF_IRQ && HAS_DMA + depends on OF && HAS_DMA help Set to M if you want Xillybus to find its resources from the Open Firmware Flattened Device Tree. If the target is an embedded diff --git a/drivers/char/xillybus/xillybus_of.c b/drivers/char/xillybus/xillybus_of.c index 78a492f5acfb..4d6625ccb48f 100644 --- a/drivers/char/xillybus/xillybus_of.c +++ b/drivers/char/xillybus/xillybus_of.c @@ -15,10 +15,6 @@ #include #include #include -#include -#include -#include -#include #include #include "xillybus.h" @@ -123,7 +119,7 @@ static int xilly_drv_probe(struct platform_device *op) struct xilly_endpoint *endpoint; int rc; int irq; - struct resource res; + struct resource *res; struct xilly_endpoint_hardware *ephw = &of_hw; if (of_property_read_bool(dev->of_node, "dma-coherent")) @@ -136,13 +132,13 @@ static int xilly_drv_probe(struct platform_device *op) dev_set_drvdata(dev, endpoint); - rc = of_address_to_resource(dev->of_node, 0, &res); - endpoint->registers = devm_ioremap_resource(dev, &res); + res = platform_get_resource(op, IORESOURCE_MEM, 0); + endpoint->registers = devm_ioremap_resource(dev, res); if (IS_ERR(endpoint->registers)) return PTR_ERR(endpoint->registers); - irq = irq_of_parse_and_map(dev->of_node, 0); + irq = platform_get_irq(op, 0); rc = devm_request_irq(dev, irq, xillybus_isr, 0, xillyname, endpoint); diff --git a/drivers/eisa/eisa-bus.c b/drivers/eisa/eisa-bus.c index 612afeaec3cb..1e8062f6dbfc 100644 --- a/drivers/eisa/eisa-bus.c +++ b/drivers/eisa/eisa-bus.c @@ -75,9 +75,9 @@ static void __init eisa_name_device(struct eisa_device *edev) static char __init *decode_eisa_sig(unsigned long addr) { - static char sig_str[EISA_SIG_LEN]; + static char sig_str[EISA_SIG_LEN]; u8 sig[4]; - u16 rev; + u16 rev; int i; for (i = 0; i < 4; i++) { @@ -96,14 +96,14 @@ static char __init *decode_eisa_sig(unsigned long addr) if (!i && (sig[0] & 0x80)) return NULL; } - - sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1); - sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1); - sig_str[2] = (sig[1] & 0x1f) + ('A' - 1); - rev = (sig[2] << 8) | sig[3]; - sprintf(sig_str + 3, "%04X", rev); - return sig_str; + sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1); + sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1); + sig_str[2] = (sig[1] & 0x1f) + ('A' - 1); + rev = (sig[2] << 8) | sig[3]; + sprintf(sig_str + 3, "%04X", rev); + + return sig_str; } static int eisa_bus_match(struct device *dev, struct device_driver *drv) @@ -198,7 +198,7 @@ static int __init eisa_init_device(struct eisa_root_device *root, sig = decode_eisa_sig(sig_addr); if (!sig) return -1; /* No EISA device here */ - + memcpy(edev->id.sig, sig, EISA_SIG_LEN); edev->slot = slot; edev->state = inb(SLOT_ADDRESS(root, slot) + EISA_CONFIG_OFFSET) @@ -222,7 +222,7 @@ static int __init eisa_init_device(struct eisa_root_device *root, if (is_forced_dev(enable_dev, enable_dev_count, root, edev)) edev->state = EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED; - + if (is_forced_dev(disable_dev, disable_dev_count, root, edev)) edev->state = EISA_CONFIG_FORCED; @@ -275,7 +275,7 @@ static int __init eisa_request_resources(struct eisa_root_device *root, edev->res[i].start = edev->res[i].end = 0; continue; } - + if (slot) { edev->res[i].name = NULL; edev->res[i].start = SLOT_ADDRESS(root, slot) @@ -295,7 +295,7 @@ static int __init eisa_request_resources(struct eisa_root_device *root, } return 0; - + failed: while (--i >= 0) release_resource(&edev->res[i]); @@ -314,7 +314,7 @@ static void __init eisa_release_resources(struct eisa_device *edev) static int __init eisa_probe(struct eisa_root_device *root) { - int i, c; + int i, c; struct eisa_device *edev; char *enabled_str; @@ -322,16 +322,14 @@ static int __init eisa_probe(struct eisa_root_device *root) /* First try to get hold of slot 0. If there is no device * here, simply fail, unless root->force_probe is set. */ - + edev = kzalloc(sizeof(*edev), GFP_KERNEL); - if (!edev) { - dev_err(root->dev, "EISA: Couldn't allocate mainboard slot\n"); + if (!edev) return -ENOMEM; - } - + if (eisa_request_resources(root, edev, 0)) { dev_warn(root->dev, - "EISA: Cannot allocate resource for mainboard\n"); + "EISA: Cannot allocate resource for mainboard\n"); kfree(edev); if (!root->force_probe) return -EBUSY; @@ -350,14 +348,14 @@ static int __init eisa_probe(struct eisa_root_device *root) if (eisa_register_device(edev)) { dev_err(&edev->dev, "EISA: Failed to register %s\n", - edev->id.sig); + edev->id.sig); eisa_release_resources(edev); kfree(edev); } - + force_probe: - - for (c = 0, i = 1; i <= root->slots; i++) { + + for (c = 0, i = 1; i <= root->slots; i++) { edev = kzalloc(sizeof(*edev), GFP_KERNEL); if (!edev) { dev_err(root->dev, "EISA: Out of memory for slot %d\n", @@ -367,8 +365,8 @@ static int __init eisa_probe(struct eisa_root_device *root) if (eisa_request_resources(root, edev, i)) { dev_warn(root->dev, - "Cannot allocate resource for EISA slot %d\n", - i); + "Cannot allocate resource for EISA slot %d\n", + i); kfree(edev); continue; } @@ -395,11 +393,11 @@ static int __init eisa_probe(struct eisa_root_device *root) if (eisa_register_device(edev)) { dev_err(&edev->dev, "EISA: Failed to register %s\n", - edev->id.sig); + edev->id.sig); eisa_release_resources(edev); kfree(edev); } - } + } dev_info(root->dev, "EISA: Detected %d card%s\n", c, c == 1 ? "" : "s"); return 0; @@ -422,7 +420,7 @@ int __init eisa_root_register(struct eisa_root_device *root) * been already registered. This prevents the virtual root * device from registering after the real one has, for * example... */ - + root->eisa_root_res.name = eisa_root_res.name; root->eisa_root_res.start = root->res->start; root->eisa_root_res.end = root->res->end; @@ -431,7 +429,7 @@ int __init eisa_root_register(struct eisa_root_device *root) err = request_resource(&eisa_root_res, &root->eisa_root_res); if (err) return err; - + root->bus_nr = eisa_bus_count++; err = eisa_probe(root); @@ -444,7 +442,7 @@ int __init eisa_root_register(struct eisa_root_device *root) static int __init eisa_init(void) { int r; - + r = bus_register(&eisa_bus_type); if (r) return r; diff --git a/drivers/eisa/pci_eisa.c b/drivers/eisa/pci_eisa.c index a333bf3517de..b5f367b44413 100644 --- a/drivers/eisa/pci_eisa.c +++ b/drivers/eisa/pci_eisa.c @@ -50,11 +50,11 @@ static int __init pci_eisa_init(struct pci_dev *pdev) return -1; } - pci_eisa_root.dev = &pdev->dev; - pci_eisa_root.res = bus_res; - pci_eisa_root.bus_base_addr = bus_res->start; - pci_eisa_root.slots = EISA_MAX_SLOTS; - pci_eisa_root.dma_mask = pdev->dma_mask; + pci_eisa_root.dev = &pdev->dev; + pci_eisa_root.res = bus_res; + pci_eisa_root.bus_base_addr = bus_res->start; + pci_eisa_root.slots = EISA_MAX_SLOTS; + pci_eisa_root.dma_mask = pdev->dma_mask; dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root); if (eisa_root_register (&pci_eisa_root)) { diff --git a/drivers/eisa/virtual_root.c b/drivers/eisa/virtual_root.c index 535e4f9c83f4..f1221c1d6319 100644 --- a/drivers/eisa/virtual_root.c +++ b/drivers/eisa/virtual_root.c @@ -35,11 +35,11 @@ static struct platform_device eisa_root_dev = { }; static struct eisa_root_device eisa_bus_root = { - .dev = &eisa_root_dev.dev, - .bus_base_addr = 0, - .res = &ioport_resource, - .slots = EISA_MAX_SLOTS, - .dma_mask = 0xffffffff, + .dev = &eisa_root_dev.dev, + .bus_base_addr = 0, + .res = &ioport_resource, + .slots = EISA_MAX_SLOTS, + .dma_mask = 0xffffffff, }; static void virtual_eisa_release (struct device *dev) @@ -50,13 +50,12 @@ static void virtual_eisa_release (struct device *dev) static int __init virtual_eisa_root_init (void) { int r; - - if ((r = platform_device_register (&eisa_root_dev))) { - return r; - } + + if ((r = platform_device_register (&eisa_root_dev))) + return r; eisa_bus_root.force_probe = force_probe; - + dev_set_drvdata(&eisa_root_dev.dev, &eisa_bus_root); if (eisa_root_register (&eisa_bus_root)) { diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index 3877d86c746a..18026354c332 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -144,7 +144,7 @@ static int adc_jack_probe(struct platform_device *pdev) return err; data->irq = platform_get_irq(pdev, 0); - if (!data->irq) { + if (data->irq < 0) { dev_err(&pdev->dev, "platform_get_irq failed\n"); return -ENODEV; } diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 1621f2f7f129..0a44d43802fe 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -1,6 +1,7 @@ /* * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver * + * Copyright (C) 2016-2017 Hans de Goede * Copyright (C) 2015 Intel Corporation * Author: Ramakrishna Pallala * @@ -97,9 +98,11 @@ struct axp288_extcon_info { struct device *dev; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; + struct delayed_work det_work; int irq[EXTCON_IRQ_END]; struct extcon_dev *edev; unsigned int previous_cable; + bool first_detect_done; }; /* Power up/down reason string array */ @@ -137,6 +140,25 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask); } +static void axp288_chrg_detect_complete(struct axp288_extcon_info *info) +{ + /* + * We depend on other drivers to do things like mux the data lines, + * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has + * not set these things up correctly resulting in the initial charger + * cable type detection giving a wrong result and we end up not charging + * or charging at only 0.5A. + * + * So we schedule a second cable type detection after 2 seconds to + * give the other drivers time to load and do their thing. + */ + if (!info->first_detect_done) { + queue_delayed_work(system_wq, &info->det_work, + msecs_to_jiffies(2000)); + info->first_detect_done = true; + } +} + static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) { int ret, stat, cfg, pwr_stat; @@ -183,8 +205,8 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) cable = EXTCON_CHG_USB_DCP; break; default: - dev_warn(info->dev, - "disconnect or unknown or ID event\n"); + dev_warn(info->dev, "unknown (reserved) bc detect result\n"); + cable = EXTCON_CHG_USB_SDP; } no_vbus: @@ -201,6 +223,8 @@ no_vbus: info->previous_cable = cable; } + axp288_chrg_detect_complete(info); + return 0; dev_det_ret: @@ -222,8 +246,11 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data) return IRQ_HANDLED; } -static void axp288_extcon_enable(struct axp288_extcon_info *info) +static void axp288_extcon_det_work(struct work_struct *work) { + struct axp288_extcon_info *info = + container_of(work, struct axp288_extcon_info, det_work.work); + regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG, BC_GLOBAL_RUN, 0); /* Enable the charger detection logic */ @@ -245,6 +272,7 @@ static int axp288_extcon_probe(struct platform_device *pdev) info->regmap = axp20x->regmap; info->regmap_irqc = axp20x->regmap_irqc; info->previous_cable = EXTCON_NONE; + INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work); platform_set_drvdata(pdev, info); @@ -290,7 +318,7 @@ static int axp288_extcon_probe(struct platform_device *pdev) } /* Start charger cable type detection */ - axp288_extcon_enable(info); + queue_delayed_work(system_wq, &info->det_work, 0); return 0; } diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 643411066ad9..227651ff9666 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -266,7 +266,7 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, static int max77693_muic_set_path(struct max77693_muic_info *info, u8 val, bool attached) { - int ret = 0; + int ret; unsigned int ctrl1, ctrl2 = 0; if (attached) diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 8152790d72e1..9f30f4929b72 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -204,7 +204,7 @@ static int max8997_muic_set_debounce_time(struct max8997_muic_info *info, static int max8997_muic_set_path(struct max8997_muic_info *info, u8 val, bool attached) { - int ret = 0; + int ret; u8 ctrl1, ctrl2 = 0; if (attached) diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index ad5448f718b3..f47ef848bcd0 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -11,33 +11,6 @@ menuconfig FPGA if FPGA -config FPGA_REGION - tristate "FPGA Region" - depends on OF && FPGA_BRIDGE - help - FPGA Regions allow loading FPGA images under control of - the Device Tree. - -config FPGA_MGR_ICE40_SPI - tristate "Lattice iCE40 SPI" - depends on OF && SPI - help - FPGA manager driver support for Lattice iCE40 FPGAs over SPI. - -config FPGA_MGR_ALTERA_CVP - tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager" - depends on PCI - help - FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V - and Arria 10 Altera FPGAs using the CvP interface over PCIe. - -config FPGA_MGR_ALTERA_PS_SPI - tristate "Altera FPGA Passive Serial over SPI" - depends on SPI - help - FPGA manager driver support for Altera Arria/Cyclone/Stratix - using the passive serial interface over SPI. - config FPGA_MGR_SOCFPGA tristate "Altera SOCFPGA FPGA Manager" depends on ARCH_SOCFPGA || COMPILE_TEST @@ -51,19 +24,31 @@ config FPGA_MGR_SOCFPGA_A10 help FPGA manager driver support for Altera Arria10 SoCFPGA. -config FPGA_MGR_TS73XX - tristate "Technologic Systems TS-73xx SBC FPGA Manager" - depends on ARCH_EP93XX && MACH_TS72XX - help - FPGA manager driver support for the Altera Cyclone II FPGA - present on the TS-73xx SBC boards. +config ALTERA_PR_IP_CORE + tristate "Altera Partial Reconfiguration IP Core" + help + Core driver support for Altera Partial Reconfiguration IP component -config FPGA_MGR_XILINX_SPI - tristate "Xilinx Configuration over Slave Serial (SPI)" +config ALTERA_PR_IP_CORE_PLAT + tristate "Platform support of Altera Partial Reconfiguration IP Core" + depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM + help + Platform driver support for Altera Partial Reconfiguration IP + component + +config FPGA_MGR_ALTERA_PS_SPI + tristate "Altera FPGA Passive Serial over SPI" depends on SPI help - FPGA manager driver support for Xilinx FPGA configuration - over slave serial interface. + FPGA manager driver support for Altera Arria/Cyclone/Stratix + using the passive serial interface over SPI. + +config FPGA_MGR_ALTERA_CVP + tristate "Altera Arria-V/Cyclone-V/Stratix-V CvP FPGA Manager" + depends on PCI + help + FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V + and Arria 10 Altera FPGAs using the CvP interface over PCIe. config FPGA_MGR_ZYNQ_FPGA tristate "Xilinx Zynq FPGA" @@ -72,9 +57,28 @@ config FPGA_MGR_ZYNQ_FPGA help FPGA manager driver support for Xilinx Zynq FPGAs. +config FPGA_MGR_XILINX_SPI + tristate "Xilinx Configuration over Slave Serial (SPI)" + depends on SPI + help + FPGA manager driver support for Xilinx FPGA configuration + over slave serial interface. + +config FPGA_MGR_ICE40_SPI + tristate "Lattice iCE40 SPI" + depends on OF && SPI + help + FPGA manager driver support for Lattice iCE40 FPGAs over SPI. + +config FPGA_MGR_TS73XX + tristate "Technologic Systems TS-73xx SBC FPGA Manager" + depends on ARCH_EP93XX && MACH_TS72XX + help + FPGA manager driver support for the Altera Cyclone II FPGA + present on the TS-73xx SBC boards. + config FPGA_BRIDGE tristate "FPGA Bridge Framework" - depends on OF help Say Y here if you want to support bridges connected between host processors and FPGAs or between FPGAs. @@ -95,18 +99,6 @@ config ALTERA_FREEZE_BRIDGE isolate one region of the FPGA from the busses while that region is being reprogrammed. -config ALTERA_PR_IP_CORE - tristate "Altera Partial Reconfiguration IP Core" - help - Core driver support for Altera Partial Reconfiguration IP component - -config ALTERA_PR_IP_CORE_PLAT - tristate "Platform support of Altera Partial Reconfiguration IP Core" - depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM - help - Platform driver support for Altera Partial Reconfiguration IP - component - config XILINX_PR_DECOUPLER tristate "Xilinx LogiCORE PR Decoupler" depends on FPGA_BRIDGE @@ -117,4 +109,19 @@ config XILINX_PR_DECOUPLER region of the FPGA from the busses while that region is being reprogrammed during partial reconfig. +config FPGA_REGION + tristate "FPGA Region" + depends on FPGA_BRIDGE + help + FPGA Region common code. A FPGA Region controls a FPGA Manager + and the FPGA Bridges associated with either a reconfigurable + region of an FPGA or a whole FPGA. + +config OF_FPGA_REGION + tristate "FPGA Region Device Tree Overlay Support" + depends on OF && FPGA_REGION + help + Support for loading FPGA images by applying a Device Tree + overlay. + endif # FPGA diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index f98dcf1d89e1..3cb276a0f88d 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -26,3 +26,4 @@ obj-$(CONFIG_XILINX_PR_DECOUPLER) += xilinx-pr-decoupler.o # High Level Interfaces obj-$(CONFIG_FPGA_REGION) += fpga-region.o +obj-$(CONFIG_OF_FPGA_REGION) += of-fpga-region.o diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c index 9651aa56244a..31bd2c59c305 100644 --- a/drivers/fpga/fpga-bridge.c +++ b/drivers/fpga/fpga-bridge.c @@ -2,6 +2,7 @@ * FPGA Bridge Framework Driver * * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved. + * Copyright (C) 2017 Intel Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -70,32 +71,13 @@ int fpga_bridge_disable(struct fpga_bridge *bridge) } EXPORT_SYMBOL_GPL(fpga_bridge_disable); -/** - * of_fpga_bridge_get - get an exclusive reference to a fpga bridge - * - * @np: node pointer of a FPGA bridge - * @info: fpga image specific information - * - * Return fpga_bridge struct if successful. - * Return -EBUSY if someone already has a reference to the bridge. - * Return -ENODEV if @np is not a FPGA Bridge. - */ -struct fpga_bridge *of_fpga_bridge_get(struct device_node *np, - struct fpga_image_info *info) - +static struct fpga_bridge *__fpga_bridge_get(struct device *dev, + struct fpga_image_info *info) { - struct device *dev; struct fpga_bridge *bridge; int ret = -ENODEV; - dev = class_find_device(fpga_bridge_class, NULL, np, - fpga_bridge_of_node_match); - if (!dev) - goto err_dev; - bridge = to_fpga_bridge(dev); - if (!bridge) - goto err_dev; bridge->info = info; @@ -117,8 +99,58 @@ err_dev: put_device(dev); return ERR_PTR(ret); } + +/** + * of_fpga_bridge_get - get an exclusive reference to a fpga bridge + * + * @np: node pointer of a FPGA bridge + * @info: fpga image specific information + * + * Return fpga_bridge struct if successful. + * Return -EBUSY if someone already has a reference to the bridge. + * Return -ENODEV if @np is not a FPGA Bridge. + */ +struct fpga_bridge *of_fpga_bridge_get(struct device_node *np, + struct fpga_image_info *info) +{ + struct device *dev; + + dev = class_find_device(fpga_bridge_class, NULL, np, + fpga_bridge_of_node_match); + if (!dev) + return ERR_PTR(-ENODEV); + + return __fpga_bridge_get(dev, info); +} EXPORT_SYMBOL_GPL(of_fpga_bridge_get); +static int fpga_bridge_dev_match(struct device *dev, const void *data) +{ + return dev->parent == data; +} + +/** + * fpga_bridge_get - get an exclusive reference to a fpga bridge + * @dev: parent device that fpga bridge was registered with + * + * Given a device, get an exclusive reference to a fpga bridge. + * + * Return: fpga manager struct or IS_ERR() condition containing error code. + */ +struct fpga_bridge *fpga_bridge_get(struct device *dev, + struct fpga_image_info *info) +{ + struct device *bridge_dev; + + bridge_dev = class_find_device(fpga_bridge_class, NULL, dev, + fpga_bridge_dev_match); + if (!bridge_dev) + return ERR_PTR(-ENODEV); + + return __fpga_bridge_get(bridge_dev, info); +} +EXPORT_SYMBOL_GPL(fpga_bridge_get); + /** * fpga_bridge_put - release a reference to a bridge * @@ -206,7 +238,7 @@ void fpga_bridges_put(struct list_head *bridge_list) EXPORT_SYMBOL_GPL(fpga_bridges_put); /** - * fpga_bridges_get_to_list - get a bridge, add it to a list + * of_fpga_bridge_get_to_list - get a bridge, add it to a list * * @np: node pointer of a FPGA bridge * @info: fpga image specific information @@ -216,14 +248,44 @@ EXPORT_SYMBOL_GPL(fpga_bridges_put); * * Return 0 for success, error code from of_fpga_bridge_get() othewise. */ -int fpga_bridge_get_to_list(struct device_node *np, +int of_fpga_bridge_get_to_list(struct device_node *np, + struct fpga_image_info *info, + struct list_head *bridge_list) +{ + struct fpga_bridge *bridge; + unsigned long flags; + + bridge = of_fpga_bridge_get(np, info); + if (IS_ERR(bridge)) + return PTR_ERR(bridge); + + spin_lock_irqsave(&bridge_list_lock, flags); + list_add(&bridge->node, bridge_list); + spin_unlock_irqrestore(&bridge_list_lock, flags); + + return 0; +} +EXPORT_SYMBOL_GPL(of_fpga_bridge_get_to_list); + +/** + * fpga_bridge_get_to_list - given device, get a bridge, add it to a list + * + * @dev: FPGA bridge device + * @info: fpga image specific information + * @bridge_list: list of FPGA bridges + * + * Get an exclusive reference to the bridge and and it to the list. + * + * Return 0 for success, error code from fpga_bridge_get() othewise. + */ +int fpga_bridge_get_to_list(struct device *dev, struct fpga_image_info *info, struct list_head *bridge_list) { struct fpga_bridge *bridge; unsigned long flags; - bridge = of_fpga_bridge_get(np, info); + bridge = fpga_bridge_get(dev, info); if (IS_ERR(bridge)) return PTR_ERR(bridge); @@ -303,6 +365,7 @@ int fpga_bridge_register(struct device *dev, const char *name, bridge->priv = priv; device_initialize(&bridge->dev); + bridge->dev.groups = br_ops->groups; bridge->dev.class = fpga_bridge_class; bridge->dev.parent = dev; bridge->dev.of_node = dev->of_node; @@ -381,7 +444,7 @@ static void __exit fpga_bridge_dev_exit(void) } MODULE_DESCRIPTION("FPGA Bridge Driver"); -MODULE_AUTHOR("Alan Tull "); +MODULE_AUTHOR("Alan Tull "); MODULE_LICENSE("GPL v2"); subsys_initcall(fpga_bridge_dev_init); diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c index 188ffefa3cc3..9939d2cbc9a6 100644 --- a/drivers/fpga/fpga-mgr.c +++ b/drivers/fpga/fpga-mgr.c @@ -2,6 +2,7 @@ * FPGA Manager Core * * Copyright (C) 2013-2015 Altera Corporation + * Copyright (C) 2017 Intel Corporation * * With code from the mailing list: * Copyright (C) 2013 Xilinx, Inc. @@ -31,6 +32,40 @@ static DEFINE_IDA(fpga_mgr_ida); static struct class *fpga_mgr_class; +struct fpga_image_info *fpga_image_info_alloc(struct device *dev) +{ + struct fpga_image_info *info; + + get_device(dev); + + info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); + if (!info) { + put_device(dev); + return NULL; + } + + info->dev = dev; + + return info; +} +EXPORT_SYMBOL_GPL(fpga_image_info_alloc); + +void fpga_image_info_free(struct fpga_image_info *info) +{ + struct device *dev; + + if (!info) + return; + + dev = info->dev; + if (info->firmware_name) + devm_kfree(dev, info->firmware_name); + + devm_kfree(dev, info); + put_device(dev); +} +EXPORT_SYMBOL_GPL(fpga_image_info_free); + /* * Call the low level driver's write_init function. This will do the * device-specific things to get the FPGA into the state where it is ready to @@ -137,8 +172,9 @@ static int fpga_mgr_write_complete(struct fpga_manager *mgr, * * Return: 0 on success, negative error code otherwise. */ -int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info, - struct sg_table *sgt) +static int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, + struct fpga_image_info *info, + struct sg_table *sgt) { int ret; @@ -170,7 +206,6 @@ int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info, return fpga_mgr_write_complete(mgr, info); } -EXPORT_SYMBOL_GPL(fpga_mgr_buf_load_sg); static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr, struct fpga_image_info *info, @@ -210,8 +245,9 @@ static int fpga_mgr_buf_load_mapped(struct fpga_manager *mgr, * * Return: 0 on success, negative error code otherwise. */ -int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info, - const char *buf, size_t count) +static int fpga_mgr_buf_load(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) { struct page **pages; struct sg_table sgt; @@ -266,7 +302,6 @@ int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info, return rc; } -EXPORT_SYMBOL_GPL(fpga_mgr_buf_load); /** * fpga_mgr_firmware_load - request firmware and load to fpga @@ -282,9 +317,9 @@ EXPORT_SYMBOL_GPL(fpga_mgr_buf_load); * * Return: 0 on success, negative error code otherwise. */ -int fpga_mgr_firmware_load(struct fpga_manager *mgr, - struct fpga_image_info *info, - const char *image_name) +static int fpga_mgr_firmware_load(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *image_name) { struct device *dev = &mgr->dev; const struct firmware *fw; @@ -307,7 +342,18 @@ int fpga_mgr_firmware_load(struct fpga_manager *mgr, return ret; } -EXPORT_SYMBOL_GPL(fpga_mgr_firmware_load); + +int fpga_mgr_load(struct fpga_manager *mgr, struct fpga_image_info *info) +{ + if (info->sgt) + return fpga_mgr_buf_load_sg(mgr, info, info->sgt); + if (info->buf && info->count) + return fpga_mgr_buf_load(mgr, info, info->buf, info->count); + if (info->firmware_name) + return fpga_mgr_firmware_load(mgr, info, info->firmware_name); + return -EINVAL; +} +EXPORT_SYMBOL_GPL(fpga_mgr_load); static const char * const state_str[] = { [FPGA_MGR_STATE_UNKNOWN] = "unknown", @@ -364,28 +410,17 @@ ATTRIBUTE_GROUPS(fpga_mgr); static struct fpga_manager *__fpga_mgr_get(struct device *dev) { struct fpga_manager *mgr; - int ret = -ENODEV; mgr = to_fpga_manager(dev); - if (!mgr) - goto err_dev; - - /* Get exclusive use of fpga manager */ - if (!mutex_trylock(&mgr->ref_mutex)) { - ret = -EBUSY; - goto err_dev; - } if (!try_module_get(dev->parent->driver->owner)) - goto err_ll_mod; + goto err_dev; return mgr; -err_ll_mod: - mutex_unlock(&mgr->ref_mutex); err_dev: put_device(dev); - return ERR_PTR(ret); + return ERR_PTR(-ENODEV); } static int fpga_mgr_dev_match(struct device *dev, const void *data) @@ -394,10 +429,10 @@ static int fpga_mgr_dev_match(struct device *dev, const void *data) } /** - * fpga_mgr_get - get an exclusive reference to a fpga mgr + * fpga_mgr_get - get a reference to a fpga mgr * @dev: parent device that fpga mgr was registered with * - * Given a device, get an exclusive reference to a fpga mgr. + * Given a device, get a reference to a fpga mgr. * * Return: fpga manager struct or IS_ERR() condition containing error code. */ @@ -418,10 +453,10 @@ static int fpga_mgr_of_node_match(struct device *dev, const void *data) } /** - * of_fpga_mgr_get - get an exclusive reference to a fpga mgr + * of_fpga_mgr_get - get a reference to a fpga mgr * @node: device node * - * Given a device node, get an exclusive reference to a fpga mgr. + * Given a device node, get a reference to a fpga mgr. * * Return: fpga manager struct or IS_ERR() condition containing error code. */ @@ -445,11 +480,40 @@ EXPORT_SYMBOL_GPL(of_fpga_mgr_get); void fpga_mgr_put(struct fpga_manager *mgr) { module_put(mgr->dev.parent->driver->owner); - mutex_unlock(&mgr->ref_mutex); put_device(&mgr->dev); } EXPORT_SYMBOL_GPL(fpga_mgr_put); +/** + * fpga_mgr_lock - Lock FPGA manager for exclusive use + * @mgr: fpga manager + * + * Given a pointer to FPGA Manager (from fpga_mgr_get() or + * of_fpga_mgr_put()) attempt to get the mutex. + * + * Return: 0 for success or -EBUSY + */ +int fpga_mgr_lock(struct fpga_manager *mgr) +{ + if (!mutex_trylock(&mgr->ref_mutex)) { + dev_err(&mgr->dev, "FPGA manager is in use.\n"); + return -EBUSY; + } + + return 0; +} +EXPORT_SYMBOL_GPL(fpga_mgr_lock); + +/** + * fpga_mgr_unlock - Unlock FPGA manager + * @mgr: fpga manager + */ +void fpga_mgr_unlock(struct fpga_manager *mgr) +{ + mutex_unlock(&mgr->ref_mutex); +} +EXPORT_SYMBOL_GPL(fpga_mgr_unlock); + /** * fpga_mgr_register - register a low level fpga manager driver * @dev: fpga manager device from pdev @@ -503,6 +567,7 @@ int fpga_mgr_register(struct device *dev, const char *name, device_initialize(&mgr->dev); mgr->dev.class = fpga_mgr_class; + mgr->dev.groups = mops->groups; mgr->dev.parent = dev; mgr->dev.of_node = dev->of_node; mgr->dev.id = id; @@ -578,7 +643,7 @@ static void __exit fpga_mgr_class_exit(void) ida_destroy(&fpga_mgr_ida); } -MODULE_AUTHOR("Alan Tull "); +MODULE_AUTHOR("Alan Tull "); MODULE_DESCRIPTION("FPGA manager framework"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/fpga-region.c b/drivers/fpga/fpga-region.c index d9ab7c75b14f..edab2a2e03ef 100644 --- a/drivers/fpga/fpga-region.c +++ b/drivers/fpga/fpga-region.c @@ -2,6 +2,7 @@ * FPGA Region - Device Tree support for FPGA programming under Linux * * Copyright (C) 2013-2016 Altera Corporation + * Copyright (C) 2017 Intel Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -18,61 +19,30 @@ #include #include +#include #include #include #include #include -#include #include #include -/** - * struct fpga_region - FPGA Region structure - * @dev: FPGA Region device - * @mutex: enforces exclusive reference to region - * @bridge_list: list of FPGA bridges specified in region - * @info: fpga image specific information - */ -struct fpga_region { - struct device dev; - struct mutex mutex; /* for exclusive reference to region */ - struct list_head bridge_list; - struct fpga_image_info *info; -}; - -#define to_fpga_region(d) container_of(d, struct fpga_region, dev) - static DEFINE_IDA(fpga_region_ida); static struct class *fpga_region_class; -static const struct of_device_id fpga_region_of_match[] = { - { .compatible = "fpga-region", }, - {}, -}; -MODULE_DEVICE_TABLE(of, fpga_region_of_match); - -static int fpga_region_of_node_match(struct device *dev, const void *data) -{ - return dev->of_node == data; -} - -/** - * fpga_region_find - find FPGA region - * @np: device node of FPGA Region - * Caller will need to put_device(®ion->dev) when done. - * Returns FPGA Region struct or NULL - */ -static struct fpga_region *fpga_region_find(struct device_node *np) +struct fpga_region *fpga_region_class_find( + struct device *start, const void *data, + int (*match)(struct device *, const void *)) { struct device *dev; - dev = class_find_device(fpga_region_class, NULL, np, - fpga_region_of_node_match); + dev = class_find_device(fpga_region_class, start, data, match); if (!dev) return NULL; return to_fpga_region(dev); } +EXPORT_SYMBOL_GPL(fpga_region_class_find); /** * fpga_region_get - get an exclusive reference to a fpga region @@ -94,15 +64,13 @@ static struct fpga_region *fpga_region_get(struct fpga_region *region) } get_device(dev); - of_node_get(dev->of_node); if (!try_module_get(dev->parent->driver->owner)) { - of_node_put(dev->of_node); put_device(dev); mutex_unlock(®ion->mutex); return ERR_PTR(-ENODEV); } - dev_dbg(®ion->dev, "get\n"); + dev_dbg(dev, "get\n"); return region; } @@ -116,403 +84,99 @@ static void fpga_region_put(struct fpga_region *region) { struct device *dev = ®ion->dev; - dev_dbg(®ion->dev, "put\n"); + dev_dbg(dev, "put\n"); module_put(dev->parent->driver->owner); - of_node_put(dev->of_node); put_device(dev); mutex_unlock(®ion->mutex); } -/** - * fpga_region_get_manager - get exclusive reference for FPGA manager - * @region: FPGA region - * - * Get FPGA Manager from "fpga-mgr" property or from ancestor region. - * - * Caller should call fpga_mgr_put() when done with manager. - * - * Return: fpga manager struct or IS_ERR() condition containing error code. - */ -static struct fpga_manager *fpga_region_get_manager(struct fpga_region *region) -{ - struct device *dev = ®ion->dev; - struct device_node *np = dev->of_node; - struct device_node *mgr_node; - struct fpga_manager *mgr; - - of_node_get(np); - while (np) { - if (of_device_is_compatible(np, "fpga-region")) { - mgr_node = of_parse_phandle(np, "fpga-mgr", 0); - if (mgr_node) { - mgr = of_fpga_mgr_get(mgr_node); - of_node_put(np); - return mgr; - } - } - np = of_get_next_parent(np); - } - of_node_put(np); - - return ERR_PTR(-EINVAL); -} - -/** - * fpga_region_get_bridges - create a list of bridges - * @region: FPGA region - * @overlay: device node of the overlay - * - * Create a list of bridges including the parent bridge and the bridges - * specified by "fpga-bridges" property. Note that the - * fpga_bridges_enable/disable/put functions are all fine with an empty list - * if that happens. - * - * Caller should call fpga_bridges_put(®ion->bridge_list) when - * done with the bridges. - * - * Return 0 for success (even if there are no bridges specified) - * or -EBUSY if any of the bridges are in use. - */ -static int fpga_region_get_bridges(struct fpga_region *region, - struct device_node *overlay) -{ - struct device *dev = ®ion->dev; - struct device_node *region_np = dev->of_node; - struct device_node *br, *np, *parent_br = NULL; - int i, ret; - - /* If parent is a bridge, add to list */ - ret = fpga_bridge_get_to_list(region_np->parent, region->info, - ®ion->bridge_list); - if (ret == -EBUSY) - return ret; - - if (!ret) - parent_br = region_np->parent; - - /* If overlay has a list of bridges, use it. */ - if (of_parse_phandle(overlay, "fpga-bridges", 0)) - np = overlay; - else - np = region_np; - - for (i = 0; ; i++) { - br = of_parse_phandle(np, "fpga-bridges", i); - if (!br) - break; - - /* If parent bridge is in list, skip it. */ - if (br == parent_br) - continue; - - /* If node is a bridge, get it and add to list */ - ret = fpga_bridge_get_to_list(br, region->info, - ®ion->bridge_list); - - /* If any of the bridges are in use, give up */ - if (ret == -EBUSY) { - fpga_bridges_put(®ion->bridge_list); - return -EBUSY; - } - } - - return 0; -} - /** * fpga_region_program_fpga - program FPGA * @region: FPGA region - * @firmware_name: name of FPGA image firmware file - * @overlay: device node of the overlay - * Program an FPGA using information in the device tree. - * Function assumes that there is a firmware-name property. + * Program an FPGA using fpga image info (region->info). * Return 0 for success or negative error code. */ -static int fpga_region_program_fpga(struct fpga_region *region, - const char *firmware_name, - struct device_node *overlay) +int fpga_region_program_fpga(struct fpga_region *region) { - struct fpga_manager *mgr; + struct device *dev = ®ion->dev; + struct fpga_image_info *info = region->info; int ret; region = fpga_region_get(region); if (IS_ERR(region)) { - pr_err("failed to get fpga region\n"); + dev_err(dev, "failed to get FPGA region\n"); return PTR_ERR(region); } - mgr = fpga_region_get_manager(region); - if (IS_ERR(mgr)) { - pr_err("failed to get fpga region manager\n"); - ret = PTR_ERR(mgr); + ret = fpga_mgr_lock(region->mgr); + if (ret) { + dev_err(dev, "FPGA manager is busy\n"); goto err_put_region; } - ret = fpga_region_get_bridges(region, overlay); - if (ret) { - pr_err("failed to get fpga region bridges\n"); - goto err_put_mgr; + /* + * In some cases, we already have a list of bridges in the + * fpga region struct. Or we don't have any bridges. + */ + if (region->get_bridges) { + ret = region->get_bridges(region); + if (ret) { + dev_err(dev, "failed to get fpga region bridges\n"); + goto err_unlock_mgr; + } } ret = fpga_bridges_disable(®ion->bridge_list); if (ret) { - pr_err("failed to disable region bridges\n"); + dev_err(dev, "failed to disable bridges\n"); goto err_put_br; } - ret = fpga_mgr_firmware_load(mgr, region->info, firmware_name); + ret = fpga_mgr_load(region->mgr, info); if (ret) { - pr_err("failed to load fpga image\n"); + dev_err(dev, "failed to load FPGA image\n"); goto err_put_br; } ret = fpga_bridges_enable(®ion->bridge_list); if (ret) { - pr_err("failed to enable region bridges\n"); + dev_err(dev, "failed to enable region bridges\n"); goto err_put_br; } - fpga_mgr_put(mgr); + fpga_mgr_unlock(region->mgr); fpga_region_put(region); return 0; err_put_br: - fpga_bridges_put(®ion->bridge_list); -err_put_mgr: - fpga_mgr_put(mgr); + if (region->get_bridges) + fpga_bridges_put(®ion->bridge_list); +err_unlock_mgr: + fpga_mgr_unlock(region->mgr); err_put_region: fpga_region_put(region); return ret; } +EXPORT_SYMBOL_GPL(fpga_region_program_fpga); -/** - * child_regions_with_firmware - * @overlay: device node of the overlay - * - * If the overlay adds child FPGA regions, they are not allowed to have - * firmware-name property. - * - * Return 0 for OK or -EINVAL if child FPGA region adds firmware-name. - */ -static int child_regions_with_firmware(struct device_node *overlay) +int fpga_region_register(struct device *dev, struct fpga_region *region) { - struct device_node *child_region; - const char *child_firmware_name; - int ret = 0; - - of_node_get(overlay); - - child_region = of_find_matching_node(overlay, fpga_region_of_match); - while (child_region) { - if (!of_property_read_string(child_region, "firmware-name", - &child_firmware_name)) { - ret = -EINVAL; - break; - } - child_region = of_find_matching_node(child_region, - fpga_region_of_match); - } - - of_node_put(child_region); - - if (ret) - pr_err("firmware-name not allowed in child FPGA region: %pOF", - child_region); - - return ret; -} - -/** - * fpga_region_notify_pre_apply - pre-apply overlay notification - * - * @region: FPGA region that the overlay was applied to - * @nd: overlay notification data - * - * Called after when an overlay targeted to a FPGA Region is about to be - * applied. Function will check the properties that will be added to the FPGA - * region. If the checks pass, it will program the FPGA. - * - * The checks are: - * The overlay must add either firmware-name or external-fpga-config property - * to the FPGA Region. - * - * firmware-name : program the FPGA - * external-fpga-config : FPGA is already programmed - * encrypted-fpga-config : FPGA bitstream is encrypted - * - * The overlay can add other FPGA regions, but child FPGA regions cannot have a - * firmware-name property since those regions don't exist yet. - * - * If the overlay that breaks the rules, notifier returns an error and the - * overlay is rejected before it goes into the main tree. - * - * Returns 0 for success or negative error code for failure. - */ -static int fpga_region_notify_pre_apply(struct fpga_region *region, - struct of_overlay_notify_data *nd) -{ - const char *firmware_name = NULL; - struct fpga_image_info *info; - int ret; - - info = devm_kzalloc(®ion->dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - region->info = info; - - /* Reject overlay if child FPGA Regions have firmware-name property */ - ret = child_regions_with_firmware(nd->overlay); - if (ret) - return ret; - - /* Read FPGA region properties from the overlay */ - if (of_property_read_bool(nd->overlay, "partial-fpga-config")) - info->flags |= FPGA_MGR_PARTIAL_RECONFIG; - - if (of_property_read_bool(nd->overlay, "external-fpga-config")) - info->flags |= FPGA_MGR_EXTERNAL_CONFIG; - - if (of_property_read_bool(nd->overlay, "encrypted-fpga-config")) - info->flags |= FPGA_MGR_ENCRYPTED_BITSTREAM; - - of_property_read_string(nd->overlay, "firmware-name", &firmware_name); - - of_property_read_u32(nd->overlay, "region-unfreeze-timeout-us", - &info->enable_timeout_us); - - of_property_read_u32(nd->overlay, "region-freeze-timeout-us", - &info->disable_timeout_us); - - of_property_read_u32(nd->overlay, "config-complete-timeout-us", - &info->config_complete_timeout_us); - - /* If FPGA was externally programmed, don't specify firmware */ - if ((info->flags & FPGA_MGR_EXTERNAL_CONFIG) && firmware_name) { - pr_err("error: specified firmware and external-fpga-config"); - return -EINVAL; - } - - /* FPGA is already configured externally. We're done. */ - if (info->flags & FPGA_MGR_EXTERNAL_CONFIG) - return 0; - - /* If we got this far, we should be programming the FPGA */ - if (!firmware_name) { - pr_err("should specify firmware-name or external-fpga-config\n"); - return -EINVAL; - } - - return fpga_region_program_fpga(region, firmware_name, nd->overlay); -} - -/** - * fpga_region_notify_post_remove - post-remove overlay notification - * - * @region: FPGA region that was targeted by the overlay that was removed - * @nd: overlay notification data - * - * Called after an overlay has been removed if the overlay's target was a - * FPGA region. - */ -static void fpga_region_notify_post_remove(struct fpga_region *region, - struct of_overlay_notify_data *nd) -{ - fpga_bridges_disable(®ion->bridge_list); - fpga_bridges_put(®ion->bridge_list); - devm_kfree(®ion->dev, region->info); - region->info = NULL; -} - -/** - * of_fpga_region_notify - reconfig notifier for dynamic DT changes - * @nb: notifier block - * @action: notifier action - * @arg: reconfig data - * - * This notifier handles programming a FPGA when a "firmware-name" property is - * added to a fpga-region. - * - * Returns NOTIFY_OK or error if FPGA programming fails. - */ -static int of_fpga_region_notify(struct notifier_block *nb, - unsigned long action, void *arg) -{ - struct of_overlay_notify_data *nd = arg; - struct fpga_region *region; - int ret; - - switch (action) { - case OF_OVERLAY_PRE_APPLY: - pr_debug("%s OF_OVERLAY_PRE_APPLY\n", __func__); - break; - case OF_OVERLAY_POST_APPLY: - pr_debug("%s OF_OVERLAY_POST_APPLY\n", __func__); - return NOTIFY_OK; /* not for us */ - case OF_OVERLAY_PRE_REMOVE: - pr_debug("%s OF_OVERLAY_PRE_REMOVE\n", __func__); - return NOTIFY_OK; /* not for us */ - case OF_OVERLAY_POST_REMOVE: - pr_debug("%s OF_OVERLAY_POST_REMOVE\n", __func__); - break; - default: /* should not happen */ - return NOTIFY_OK; - } - - region = fpga_region_find(nd->target); - if (!region) - return NOTIFY_OK; - - ret = 0; - switch (action) { - case OF_OVERLAY_PRE_APPLY: - ret = fpga_region_notify_pre_apply(region, nd); - break; - - case OF_OVERLAY_POST_REMOVE: - fpga_region_notify_post_remove(region, nd); - break; - } - - put_device(®ion->dev); - - if (ret) - return notifier_from_errno(ret); - - return NOTIFY_OK; -} - -static struct notifier_block fpga_region_of_nb = { - .notifier_call = of_fpga_region_notify, -}; - -static int fpga_region_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct device_node *np = dev->of_node; - struct fpga_region *region; int id, ret = 0; - region = kzalloc(sizeof(*region), GFP_KERNEL); - if (!region) - return -ENOMEM; - id = ida_simple_get(&fpga_region_ida, 0, 0, GFP_KERNEL); - if (id < 0) { - ret = id; - goto err_kfree; - } + if (id < 0) + return id; mutex_init(®ion->mutex); INIT_LIST_HEAD(®ion->bridge_list); - device_initialize(®ion->dev); + region->dev.groups = region->groups; region->dev.class = fpga_region_class; region->dev.parent = dev; - region->dev.of_node = np; + region->dev.of_node = dev->of_node; region->dev.id = id; dev_set_drvdata(dev, region); @@ -524,44 +188,27 @@ static int fpga_region_probe(struct platform_device *pdev) if (ret) goto err_remove; - of_platform_populate(np, fpga_region_of_match, NULL, ®ion->dev); - - dev_info(dev, "FPGA Region probed\n"); - return 0; err_remove: ida_simple_remove(&fpga_region_ida, id); -err_kfree: - kfree(region); - return ret; } +EXPORT_SYMBOL_GPL(fpga_region_register); -static int fpga_region_remove(struct platform_device *pdev) +int fpga_region_unregister(struct fpga_region *region) { - struct fpga_region *region = platform_get_drvdata(pdev); - device_unregister(®ion->dev); return 0; } - -static struct platform_driver fpga_region_driver = { - .probe = fpga_region_probe, - .remove = fpga_region_remove, - .driver = { - .name = "fpga-region", - .of_match_table = of_match_ptr(fpga_region_of_match), - }, -}; +EXPORT_SYMBOL_GPL(fpga_region_unregister); static void fpga_region_dev_release(struct device *dev) { struct fpga_region *region = to_fpga_region(dev); ida_simple_remove(&fpga_region_ida, region->dev.id); - kfree(region); } /** @@ -570,36 +217,17 @@ static void fpga_region_dev_release(struct device *dev) */ static int __init fpga_region_init(void) { - int ret; - fpga_region_class = class_create(THIS_MODULE, "fpga_region"); if (IS_ERR(fpga_region_class)) return PTR_ERR(fpga_region_class); fpga_region_class->dev_release = fpga_region_dev_release; - ret = of_overlay_notifier_register(&fpga_region_of_nb); - if (ret) - goto err_class; - - ret = platform_driver_register(&fpga_region_driver); - if (ret) - goto err_plat; - return 0; - -err_plat: - of_overlay_notifier_unregister(&fpga_region_of_nb); -err_class: - class_destroy(fpga_region_class); - ida_destroy(&fpga_region_ida); - return ret; } static void __exit fpga_region_exit(void) { - platform_driver_unregister(&fpga_region_driver); - of_overlay_notifier_unregister(&fpga_region_of_nb); class_destroy(fpga_region_class); ida_destroy(&fpga_region_ida); } @@ -608,5 +236,5 @@ subsys_initcall(fpga_region_init); module_exit(fpga_region_exit); MODULE_DESCRIPTION("FPGA Region"); -MODULE_AUTHOR("Alan Tull "); +MODULE_AUTHOR("Alan Tull "); MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/of-fpga-region.c b/drivers/fpga/of-fpga-region.c new file mode 100644 index 000000000000..119ff75522f1 --- /dev/null +++ b/drivers/fpga/of-fpga-region.c @@ -0,0 +1,504 @@ +/* + * FPGA Region - Device Tree support for FPGA programming under Linux + * + * Copyright (C) 2013-2016 Altera Corporation + * Copyright (C) 2017 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct of_device_id fpga_region_of_match[] = { + { .compatible = "fpga-region", }, + {}, +}; +MODULE_DEVICE_TABLE(of, fpga_region_of_match); + +static int fpga_region_of_node_match(struct device *dev, const void *data) +{ + return dev->of_node == data; +} + +/** + * of_fpga_region_find - find FPGA region + * @np: device node of FPGA Region + * + * Caller will need to put_device(®ion->dev) when done. + * + * Returns FPGA Region struct or NULL + */ +static struct fpga_region *of_fpga_region_find(struct device_node *np) +{ + return fpga_region_class_find(NULL, np, fpga_region_of_node_match); +} + +/** + * of_fpga_region_get_mgr - get reference for FPGA manager + * @np: device node of FPGA region + * + * Get FPGA Manager from "fpga-mgr" property or from ancestor region. + * + * Caller should call fpga_mgr_put() when done with manager. + * + * Return: fpga manager struct or IS_ERR() condition containing error code. + */ +static struct fpga_manager *of_fpga_region_get_mgr(struct device_node *np) +{ + struct device_node *mgr_node; + struct fpga_manager *mgr; + + of_node_get(np); + while (np) { + if (of_device_is_compatible(np, "fpga-region")) { + mgr_node = of_parse_phandle(np, "fpga-mgr", 0); + if (mgr_node) { + mgr = of_fpga_mgr_get(mgr_node); + of_node_put(mgr_node); + of_node_put(np); + return mgr; + } + } + np = of_get_next_parent(np); + } + of_node_put(np); + + return ERR_PTR(-EINVAL); +} + +/** + * of_fpga_region_get_bridges - create a list of bridges + * @region: FPGA region + * + * Create a list of bridges including the parent bridge and the bridges + * specified by "fpga-bridges" property. Note that the + * fpga_bridges_enable/disable/put functions are all fine with an empty list + * if that happens. + * + * Caller should call fpga_bridges_put(®ion->bridge_list) when + * done with the bridges. + * + * Return 0 for success (even if there are no bridges specified) + * or -EBUSY if any of the bridges are in use. + */ +static int of_fpga_region_get_bridges(struct fpga_region *region) +{ + struct device *dev = ®ion->dev; + struct device_node *region_np = dev->of_node; + struct fpga_image_info *info = region->info; + struct device_node *br, *np, *parent_br = NULL; + int i, ret; + + /* If parent is a bridge, add to list */ + ret = of_fpga_bridge_get_to_list(region_np->parent, info, + ®ion->bridge_list); + + /* -EBUSY means parent is a bridge that is under use. Give up. */ + if (ret == -EBUSY) + return ret; + + /* Zero return code means parent was a bridge and was added to list. */ + if (!ret) + parent_br = region_np->parent; + + /* If overlay has a list of bridges, use it. */ + br = of_parse_phandle(info->overlay, "fpga-bridges", 0); + if (br) { + of_node_put(br); + np = info->overlay; + } else { + np = region_np; + } + + for (i = 0; ; i++) { + br = of_parse_phandle(np, "fpga-bridges", i); + if (!br) + break; + + /* If parent bridge is in list, skip it. */ + if (br == parent_br) { + of_node_put(br); + continue; + } + + /* If node is a bridge, get it and add to list */ + ret = of_fpga_bridge_get_to_list(br, info, + ®ion->bridge_list); + of_node_put(br); + + /* If any of the bridges are in use, give up */ + if (ret == -EBUSY) { + fpga_bridges_put(®ion->bridge_list); + return -EBUSY; + } + } + + return 0; +} + +/** + * child_regions_with_firmware + * @overlay: device node of the overlay + * + * If the overlay adds child FPGA regions, they are not allowed to have + * firmware-name property. + * + * Return 0 for OK or -EINVAL if child FPGA region adds firmware-name. + */ +static int child_regions_with_firmware(struct device_node *overlay) +{ + struct device_node *child_region; + const char *child_firmware_name; + int ret = 0; + + of_node_get(overlay); + + child_region = of_find_matching_node(overlay, fpga_region_of_match); + while (child_region) { + if (!of_property_read_string(child_region, "firmware-name", + &child_firmware_name)) { + ret = -EINVAL; + break; + } + child_region = of_find_matching_node(child_region, + fpga_region_of_match); + } + + of_node_put(child_region); + + if (ret) + pr_err("firmware-name not allowed in child FPGA region: %pOF", + child_region); + + return ret; +} + +/** + * of_fpga_region_parse_ov - parse and check overlay applied to region + * + * @region: FPGA region + * @overlay: overlay applied to the FPGA region + * + * Given an overlay applied to a FPGA region, parse the FPGA image specific + * info in the overlay and do some checking. + * + * Returns: + * NULL if overlay doesn't direct us to program the FPGA. + * fpga_image_info struct if there is an image to program. + * error code for invalid overlay. + */ +static struct fpga_image_info *of_fpga_region_parse_ov( + struct fpga_region *region, + struct device_node *overlay) +{ + struct device *dev = ®ion->dev; + struct fpga_image_info *info; + const char *firmware_name; + int ret; + + if (region->info) { + dev_err(dev, "Region already has overlay applied.\n"); + return ERR_PTR(-EINVAL); + } + + /* + * Reject overlay if child FPGA Regions added in the overlay have + * firmware-name property (would mean that an FPGA region that has + * not been added to the live tree yet is doing FPGA programming). + */ + ret = child_regions_with_firmware(overlay); + if (ret) + return ERR_PTR(ret); + + info = fpga_image_info_alloc(dev); + if (!info) + return ERR_PTR(-ENOMEM); + + info->overlay = overlay; + + /* Read FPGA region properties from the overlay */ + if (of_property_read_bool(overlay, "partial-fpga-config")) + info->flags |= FPGA_MGR_PARTIAL_RECONFIG; + + if (of_property_read_bool(overlay, "external-fpga-config")) + info->flags |= FPGA_MGR_EXTERNAL_CONFIG; + + if (of_property_read_bool(overlay, "encrypted-fpga-config")) + info->flags |= FPGA_MGR_ENCRYPTED_BITSTREAM; + + if (!of_property_read_string(overlay, "firmware-name", + &firmware_name)) { + info->firmware_name = devm_kstrdup(dev, firmware_name, + GFP_KERNEL); + if (!info->firmware_name) + return ERR_PTR(-ENOMEM); + } + + of_property_read_u32(overlay, "region-unfreeze-timeout-us", + &info->enable_timeout_us); + + of_property_read_u32(overlay, "region-freeze-timeout-us", + &info->disable_timeout_us); + + of_property_read_u32(overlay, "config-complete-timeout-us", + &info->config_complete_timeout_us); + + /* If overlay is not programming the FPGA, don't need FPGA image info */ + if (!info->firmware_name) { + ret = 0; + goto ret_no_info; + } + + /* + * If overlay informs us FPGA was externally programmed, specifying + * firmware here would be ambiguous. + */ + if (info->flags & FPGA_MGR_EXTERNAL_CONFIG) { + dev_err(dev, "error: specified firmware and external-fpga-config"); + ret = -EINVAL; + goto ret_no_info; + } + + return info; +ret_no_info: + fpga_image_info_free(info); + return ERR_PTR(ret); +} + +/** + * of_fpga_region_notify_pre_apply - pre-apply overlay notification + * + * @region: FPGA region that the overlay was applied to + * @nd: overlay notification data + * + * Called when an overlay targeted to a FPGA Region is about to be applied. + * Parses the overlay for properties that influence how the FPGA will be + * programmed and does some checking. If the checks pass, programs the FPGA. + * If the checks fail, overlay is rejected and does not get added to the + * live tree. + * + * Returns 0 for success or negative error code for failure. + */ +static int of_fpga_region_notify_pre_apply(struct fpga_region *region, + struct of_overlay_notify_data *nd) +{ + struct device *dev = ®ion->dev; + struct fpga_image_info *info; + int ret; + + info = of_fpga_region_parse_ov(region, nd->overlay); + if (IS_ERR(info)) + return PTR_ERR(info); + + /* If overlay doesn't program the FPGA, accept it anyway. */ + if (!info) + return 0; + + if (region->info) { + dev_err(dev, "Region already has overlay applied.\n"); + return -EINVAL; + } + + region->info = info; + ret = fpga_region_program_fpga(region); + if (ret) { + /* error; reject overlay */ + fpga_image_info_free(info); + region->info = NULL; + } + + return ret; +} + +/** + * of_fpga_region_notify_post_remove - post-remove overlay notification + * + * @region: FPGA region that was targeted by the overlay that was removed + * @nd: overlay notification data + * + * Called after an overlay has been removed if the overlay's target was a + * FPGA region. + */ +static void of_fpga_region_notify_post_remove(struct fpga_region *region, + struct of_overlay_notify_data *nd) +{ + fpga_bridges_disable(®ion->bridge_list); + fpga_bridges_put(®ion->bridge_list); + fpga_image_info_free(region->info); + region->info = NULL; +} + +/** + * of_fpga_region_notify - reconfig notifier for dynamic DT changes + * @nb: notifier block + * @action: notifier action + * @arg: reconfig data + * + * This notifier handles programming a FPGA when a "firmware-name" property is + * added to a fpga-region. + * + * Returns NOTIFY_OK or error if FPGA programming fails. + */ +static int of_fpga_region_notify(struct notifier_block *nb, + unsigned long action, void *arg) +{ + struct of_overlay_notify_data *nd = arg; + struct fpga_region *region; + int ret; + + switch (action) { + case OF_OVERLAY_PRE_APPLY: + pr_debug("%s OF_OVERLAY_PRE_APPLY\n", __func__); + break; + case OF_OVERLAY_POST_APPLY: + pr_debug("%s OF_OVERLAY_POST_APPLY\n", __func__); + return NOTIFY_OK; /* not for us */ + case OF_OVERLAY_PRE_REMOVE: + pr_debug("%s OF_OVERLAY_PRE_REMOVE\n", __func__); + return NOTIFY_OK; /* not for us */ + case OF_OVERLAY_POST_REMOVE: + pr_debug("%s OF_OVERLAY_POST_REMOVE\n", __func__); + break; + default: /* should not happen */ + return NOTIFY_OK; + } + + region = of_fpga_region_find(nd->target); + if (!region) + return NOTIFY_OK; + + ret = 0; + switch (action) { + case OF_OVERLAY_PRE_APPLY: + ret = of_fpga_region_notify_pre_apply(region, nd); + break; + + case OF_OVERLAY_POST_REMOVE: + of_fpga_region_notify_post_remove(region, nd); + break; + } + + put_device(®ion->dev); + + if (ret) + return notifier_from_errno(ret); + + return NOTIFY_OK; +} + +static struct notifier_block fpga_region_of_nb = { + .notifier_call = of_fpga_region_notify, +}; + +static int of_fpga_region_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct fpga_region *region; + struct fpga_manager *mgr; + int ret; + + /* Find the FPGA mgr specified by region or parent region. */ + mgr = of_fpga_region_get_mgr(np); + if (IS_ERR(mgr)) + return -EPROBE_DEFER; + + region = devm_kzalloc(dev, sizeof(*region), GFP_KERNEL); + if (!region) { + ret = -ENOMEM; + goto eprobe_mgr_put; + } + + region->mgr = mgr; + + /* Specify how to get bridges for this type of region. */ + region->get_bridges = of_fpga_region_get_bridges; + + ret = fpga_region_register(dev, region); + if (ret) + goto eprobe_mgr_put; + + of_platform_populate(np, fpga_region_of_match, NULL, ®ion->dev); + + dev_info(dev, "FPGA Region probed\n"); + + return 0; + +eprobe_mgr_put: + fpga_mgr_put(mgr); + return ret; +} + +static int of_fpga_region_remove(struct platform_device *pdev) +{ + struct fpga_region *region = platform_get_drvdata(pdev); + + fpga_region_unregister(region); + fpga_mgr_put(region->mgr); + + return 0; +} + +static struct platform_driver of_fpga_region_driver = { + .probe = of_fpga_region_probe, + .remove = of_fpga_region_remove, + .driver = { + .name = "of-fpga-region", + .of_match_table = of_match_ptr(fpga_region_of_match), + }, +}; + +/** + * fpga_region_init - init function for fpga_region class + * Creates the fpga_region class and registers a reconfig notifier. + */ +static int __init of_fpga_region_init(void) +{ + int ret; + + ret = of_overlay_notifier_register(&fpga_region_of_nb); + if (ret) + return ret; + + ret = platform_driver_register(&of_fpga_region_driver); + if (ret) + goto err_plat; + + return 0; + +err_plat: + of_overlay_notifier_unregister(&fpga_region_of_nb); + return ret; +} + +static void __exit of_fpga_region_exit(void) +{ + platform_driver_unregister(&of_fpga_region_driver); + of_overlay_notifier_unregister(&fpga_region_of_nb); +} + +subsys_initcall(of_fpga_region_init); +module_exit(of_fpga_region_exit); + +MODULE_DESCRIPTION("FPGA Region"); +MODULE_AUTHOR("Alan Tull "); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/fpga/socfpga-a10.c b/drivers/fpga/socfpga-a10.c index f8770af0f6b5..a46e343a5b72 100644 --- a/drivers/fpga/socfpga-a10.c +++ b/drivers/fpga/socfpga-a10.c @@ -519,8 +519,14 @@ static int socfpga_a10_fpga_probe(struct platform_device *pdev) return -EBUSY; } - return fpga_mgr_register(dev, "SoCFPGA Arria10 FPGA Manager", + ret = fpga_mgr_register(dev, "SoCFPGA Arria10 FPGA Manager", &socfpga_a10_fpga_mgr_ops, priv); + if (ret) { + clk_disable_unprepare(priv->clk); + return ret; + } + + return 0; } static int socfpga_a10_fpga_remove(struct platform_device *pdev) diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig index 6821ed0cd5e8..513e35173aaa 100644 --- a/drivers/fsi/Kconfig +++ b/drivers/fsi/Kconfig @@ -2,9 +2,7 @@ # FSI subsystem # -menu "FSI support" - -config FSI +menuconfig FSI tristate "FSI support" select CRC4 ---help--- @@ -34,5 +32,3 @@ config FSI_SCOM This option enables an FSI based SCOM device driver. endif - -endmenu diff --git a/drivers/hv/hv.c b/drivers/hv/hv.c index 8267439dd1ee..fe96aab9e794 100644 --- a/drivers/hv/hv.c +++ b/drivers/hv/hv.c @@ -49,9 +49,6 @@ struct hv_context hv_context = { */ int hv_init(void) { - if (!hv_is_hypercall_page_setup()) - return -ENOTSUPP; - hv_context.cpu_context = alloc_percpu(struct hv_per_cpu_context); if (!hv_context.cpu_context) return -ENOMEM; diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 610223f0e945..bc65c4d79c1f 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -37,7 +37,6 @@ #include #include -#include #include #include #include @@ -1053,7 +1052,7 @@ static int vmbus_bus_init(void) * Initialize the per-cpu interrupt state and * connect to the host. */ - ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "x86/hyperv:online", + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hyperv/vmbus:online", hv_synic_init, hv_synic_cleanup); if (ret < 0) goto err_alloc; @@ -1193,7 +1192,7 @@ static ssize_t out_mask_show(const struct vmbus_channel *channel, char *buf) return sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask); } -VMBUS_CHAN_ATTR_RO(out_mask); +static VMBUS_CHAN_ATTR_RO(out_mask); static ssize_t in_mask_show(const struct vmbus_channel *channel, char *buf) { @@ -1201,7 +1200,7 @@ static ssize_t in_mask_show(const struct vmbus_channel *channel, char *buf) return sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask); } -VMBUS_CHAN_ATTR_RO(in_mask); +static VMBUS_CHAN_ATTR_RO(in_mask); static ssize_t read_avail_show(const struct vmbus_channel *channel, char *buf) { @@ -1209,7 +1208,7 @@ static ssize_t read_avail_show(const struct vmbus_channel *channel, char *buf) return sprintf(buf, "%u\n", hv_get_bytes_to_read(rbi)); } -VMBUS_CHAN_ATTR_RO(read_avail); +static VMBUS_CHAN_ATTR_RO(read_avail); static ssize_t write_avail_show(const struct vmbus_channel *channel, char *buf) { @@ -1217,13 +1216,13 @@ static ssize_t write_avail_show(const struct vmbus_channel *channel, char *buf) return sprintf(buf, "%u\n", hv_get_bytes_to_write(rbi)); } -VMBUS_CHAN_ATTR_RO(write_avail); +static VMBUS_CHAN_ATTR_RO(write_avail); static ssize_t show_target_cpu(const struct vmbus_channel *channel, char *buf) { return sprintf(buf, "%u\n", channel->target_cpu); } -VMBUS_CHAN_ATTR(cpu, S_IRUGO, show_target_cpu, NULL); +static VMBUS_CHAN_ATTR(cpu, S_IRUGO, show_target_cpu, NULL); static ssize_t channel_pending_show(const struct vmbus_channel *channel, char *buf) @@ -1232,7 +1231,7 @@ static ssize_t channel_pending_show(const struct vmbus_channel *channel, channel_pending(channel, vmbus_connection.monitor_pages[1])); } -VMBUS_CHAN_ATTR(pending, S_IRUGO, channel_pending_show, NULL); +static VMBUS_CHAN_ATTR(pending, S_IRUGO, channel_pending_show, NULL); static ssize_t channel_latency_show(const struct vmbus_channel *channel, char *buf) @@ -1241,19 +1240,34 @@ static ssize_t channel_latency_show(const struct vmbus_channel *channel, channel_latency(channel, vmbus_connection.monitor_pages[1])); } -VMBUS_CHAN_ATTR(latency, S_IRUGO, channel_latency_show, NULL); +static VMBUS_CHAN_ATTR(latency, S_IRUGO, channel_latency_show, NULL); static ssize_t channel_interrupts_show(const struct vmbus_channel *channel, char *buf) { return sprintf(buf, "%llu\n", channel->interrupts); } -VMBUS_CHAN_ATTR(interrupts, S_IRUGO, channel_interrupts_show, NULL); +static VMBUS_CHAN_ATTR(interrupts, S_IRUGO, channel_interrupts_show, NULL); static ssize_t channel_events_show(const struct vmbus_channel *channel, char *buf) { return sprintf(buf, "%llu\n", channel->sig_events); } -VMBUS_CHAN_ATTR(events, S_IRUGO, channel_events_show, NULL); +static VMBUS_CHAN_ATTR(events, S_IRUGO, channel_events_show, NULL); + +static ssize_t subchannel_monitor_id_show(const struct vmbus_channel *channel, + char *buf) +{ + return sprintf(buf, "%u\n", channel->offermsg.monitorid); +} +static VMBUS_CHAN_ATTR(monitor_id, S_IRUGO, subchannel_monitor_id_show, NULL); + +static ssize_t subchannel_id_show(const struct vmbus_channel *channel, + char *buf) +{ + return sprintf(buf, "%u\n", + channel->offermsg.offer.sub_channel_index); +} +static VMBUS_CHAN_ATTR_RO(subchannel_id); static struct attribute *vmbus_chan_attrs[] = { &chan_attr_out_mask.attr, @@ -1265,6 +1279,8 @@ static struct attribute *vmbus_chan_attrs[] = { &chan_attr_latency.attr, &chan_attr_interrupts.attr, &chan_attr_events.attr, + &chan_attr_monitor_id.attr, + &chan_attr_subchannel_id.attr, NULL }; @@ -1717,7 +1733,7 @@ static int __init hv_acpi_init(void) { int ret, t; - if (x86_hyper_type != X86_HYPER_MS_HYPERV) + if (!hv_is_hyperv_initialized()) return -ENODEV; init_completion(&probe_event); diff --git a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c index 8f4357e2626c..043da86b0fe9 100644 --- a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c +++ b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c @@ -163,10 +163,8 @@ static int replicator_probe(struct amba_device *adev, const struct amba_id *id) desc.dev = &adev->dev; desc.groups = replicator_groups; drvdata->csdev = coresight_register(&desc); - if (IS_ERR(drvdata->csdev)) - return PTR_ERR(drvdata->csdev); - return 0; + return PTR_ERR_OR_ZERO(drvdata->csdev); } #ifdef CONFIG_PM diff --git a/drivers/hwtracing/coresight/coresight-etb10.c b/drivers/hwtracing/coresight/coresight-etb10.c index e03e58933141..580cd381adf3 100644 --- a/drivers/hwtracing/coresight/coresight-etb10.c +++ b/drivers/hwtracing/coresight/coresight-etb10.c @@ -33,7 +33,6 @@ #include #include -#include #include "coresight-priv.h" diff --git a/drivers/hwtracing/coresight/coresight-funnel.c b/drivers/hwtracing/coresight/coresight-funnel.c index fd3c396717f6..9f8ac0bef853 100644 --- a/drivers/hwtracing/coresight/coresight-funnel.c +++ b/drivers/hwtracing/coresight/coresight-funnel.c @@ -214,10 +214,8 @@ static int funnel_probe(struct amba_device *adev, const struct amba_id *id) desc.dev = dev; desc.groups = coresight_funnel_groups; drvdata->csdev = coresight_register(&desc); - if (IS_ERR(drvdata->csdev)) - return PTR_ERR(drvdata->csdev); - return 0; + return PTR_ERR_OR_ZERO(drvdata->csdev); } #ifdef CONFIG_PM diff --git a/drivers/hwtracing/coresight/coresight-tpiu.c b/drivers/hwtracing/coresight/coresight-tpiu.c index bef49a3a5ca7..805f7c2210fe 100644 --- a/drivers/hwtracing/coresight/coresight-tpiu.c +++ b/drivers/hwtracing/coresight/coresight-tpiu.c @@ -46,8 +46,11 @@ #define TPIU_ITATBCTR0 0xef8 /** register definition **/ +/* FFSR - 0x300 */ +#define FFSR_FT_STOPPED BIT(1) /* FFCR - 0x304 */ #define FFCR_FON_MAN BIT(6) +#define FFCR_STOP_FI BIT(12) /** * @base: memory mapped base address for this component. @@ -85,10 +88,14 @@ static void tpiu_disable_hw(struct tpiu_drvdata *drvdata) { CS_UNLOCK(drvdata->base); - /* Clear formatter controle reg. */ - writel_relaxed(0x0, drvdata->base + TPIU_FFCR); + /* Clear formatter and stop on flush */ + writel_relaxed(FFCR_STOP_FI, drvdata->base + TPIU_FFCR); /* Generate manual flush */ - writel_relaxed(FFCR_FON_MAN, drvdata->base + TPIU_FFCR); + writel_relaxed(FFCR_STOP_FI | FFCR_FON_MAN, drvdata->base + TPIU_FFCR); + /* Wait for flush to complete */ + coresight_timeout(drvdata->base, TPIU_FFCR, FFCR_FON_MAN, 0); + /* Wait for formatter to stop */ + coresight_timeout(drvdata->base, TPIU_FFSR, FFSR_FT_STOPPED, 1); CS_LOCK(drvdata->base); } @@ -160,10 +167,8 @@ static int tpiu_probe(struct amba_device *adev, const struct amba_id *id) desc.pdata = pdata; desc.dev = dev; drvdata->csdev = coresight_register(&desc); - if (IS_ERR(drvdata->csdev)) - return PTR_ERR(drvdata->csdev); - return 0; + return PTR_ERR_OR_ZERO(drvdata->csdev); } #ifdef CONFIG_PM diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c index b8091bef21dc..389c4baeca9d 100644 --- a/drivers/hwtracing/coresight/coresight.c +++ b/drivers/hwtracing/coresight/coresight.c @@ -843,32 +843,17 @@ static void coresight_fixup_orphan_conns(struct coresight_device *csdev) } -static int coresight_name_match(struct device *dev, void *data) -{ - char *to_match; - struct coresight_device *i_csdev; - - to_match = data; - i_csdev = to_coresight_device(dev); - - if (to_match && !strcmp(to_match, dev_name(&i_csdev->dev))) - return 1; - - return 0; -} - static void coresight_fixup_device_conns(struct coresight_device *csdev) { int i; - struct device *dev = NULL; - struct coresight_connection *conn; for (i = 0; i < csdev->nr_outport; i++) { - conn = &csdev->conns[i]; - dev = bus_find_device(&coresight_bustype, NULL, - (void *)conn->child_name, - coresight_name_match); + struct coresight_connection *conn = &csdev->conns[i]; + struct device *dev = NULL; + if (conn->child_name) + dev = bus_find_device_by_name(&coresight_bustype, NULL, + conn->child_name); if (dev) { conn->child_dev = to_coresight_device(dev); /* and put reference from 'bus_find_device()' */ diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 7c0fa24f9067..6722073e339b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -53,7 +53,7 @@ config AD525X_DPOT_SPI config ATMEL_TCLIB bool "Atmel AT32/AT91 Timer/Counter Library" - depends on (AVR32 || ARCH_AT91) + depends on ARCH_AT91 help Select this if you want a library to allocate the Timer/Counter blocks found on many Atmel processors. This facilitates using @@ -192,7 +192,7 @@ config ICS932S401 config ATMEL_SSC tristate "Device driver for Atmel SSC peripheral" - depends on HAS_IOMEM && (AVR32 || ARCH_AT91 || COMPILE_TEST) + depends on HAS_IOMEM && (ARCH_AT91 || COMPILE_TEST) ---help--- This option enables device driver support for Atmel Synchronized Serial Communication peripheral (SSC). diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c index fe1672747bc1..bc591b7168db 100644 --- a/drivers/misc/ad525x_dpot.c +++ b/drivers/misc/ad525x_dpot.c @@ -3,7 +3,7 @@ * Copyright (c) 2009-2010 Analog Devices, Inc. * Author: Michael Hennerich * - * DEVID #Wipers #Positions Resistor Options (kOhm) + * DEVID #Wipers #Positions Resistor Options (kOhm) * AD5258 1 64 1, 10, 50, 100 * AD5259 1 256 5, 10, 50, 100 * AD5251 2 64 1, 10, 50, 100 @@ -84,12 +84,12 @@ struct dpot_data { struct ad_dpot_bus_data bdata; struct mutex update_lock; - unsigned rdac_mask; - unsigned max_pos; + unsigned int rdac_mask; + unsigned int max_pos; unsigned long devid; - unsigned uid; - unsigned feat; - unsigned wipers; + unsigned int uid; + unsigned int feat; + unsigned int wipers; u16 rdac_cache[MAX_RDACS]; DECLARE_BITMAP(otp_en_mask, MAX_RDACS); }; @@ -126,7 +126,7 @@ static inline int dpot_write_r8d16(struct dpot_data *dpot, u8 reg, u16 val) static s32 dpot_read_spi(struct dpot_data *dpot, u8 reg) { - unsigned ctrl = 0; + unsigned int ctrl = 0; int value; if (!(reg & (DPOT_ADDR_EEPROM | DPOT_ADDR_CMD))) { @@ -175,7 +175,7 @@ static s32 dpot_read_spi(struct dpot_data *dpot, u8 reg) static s32 dpot_read_i2c(struct dpot_data *dpot, u8 reg) { int value; - unsigned ctrl = 0; + unsigned int ctrl = 0; switch (dpot->uid) { case DPOT_UID(AD5246_ID): @@ -238,7 +238,7 @@ static s32 dpot_read(struct dpot_data *dpot, u8 reg) static s32 dpot_write_spi(struct dpot_data *dpot, u8 reg, u16 value) { - unsigned val = 0; + unsigned int val = 0; if (!(reg & (DPOT_ADDR_EEPROM | DPOT_ADDR_CMD | DPOT_ADDR_OTP))) { if (dpot->feat & F_RDACS_WONLY) @@ -328,7 +328,7 @@ static s32 dpot_write_spi(struct dpot_data *dpot, u8 reg, u16 value) static s32 dpot_write_i2c(struct dpot_data *dpot, u8 reg, u16 value) { /* Only write the instruction byte for certain commands */ - unsigned tmp = 0, ctrl = 0; + unsigned int tmp = 0, ctrl = 0; switch (dpot->uid) { case DPOT_UID(AD5246_ID): @@ -515,11 +515,11 @@ set_##_name(struct device *dev, \ #define DPOT_DEVICE_SHOW_SET(name, reg) \ DPOT_DEVICE_SHOW(name, reg) \ DPOT_DEVICE_SET(name, reg) \ -static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, set_##name); +static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, set_##name) #define DPOT_DEVICE_SHOW_ONLY(name, reg) \ DPOT_DEVICE_SHOW(name, reg) \ -static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, NULL); +static DEVICE_ATTR(name, S_IWUSR | S_IRUGO, show_##name, NULL) DPOT_DEVICE_SHOW_SET(rdac0, DPOT_ADDR_RDAC | DPOT_RDAC0); DPOT_DEVICE_SHOW_SET(eeprom0, DPOT_ADDR_EEPROM | DPOT_RDAC0); @@ -616,7 +616,7 @@ set_##_name(struct device *dev, \ { \ return sysfs_do_cmd(dev, attr, buf, count, _cmd); \ } \ -static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, NULL, set_##_name); +static DEVICE_ATTR(_name, S_IWUSR | S_IRUGO, NULL, set_##_name) DPOT_DEVICE_DO_CMD(inc_all, DPOT_INC_ALL); DPOT_DEVICE_DO_CMD(dec_all, DPOT_DEC_ALL); @@ -636,7 +636,7 @@ static const struct attribute_group ad525x_group_commands = { }; static int ad_dpot_add_files(struct device *dev, - unsigned features, unsigned rdac) + unsigned int features, unsigned int rdac) { int err = sysfs_create_file(&dev->kobj, dpot_attrib_wipers[rdac]); @@ -661,7 +661,7 @@ static int ad_dpot_add_files(struct device *dev, } static inline void ad_dpot_remove_files(struct device *dev, - unsigned features, unsigned rdac) + unsigned int features, unsigned int rdac) { sysfs_remove_file(&dev->kobj, dpot_attrib_wipers[rdac]); diff --git a/drivers/misc/ad525x_dpot.h b/drivers/misc/ad525x_dpot.h index 6bd1eba23bc0..443a51fd5680 100644 --- a/drivers/misc/ad525x_dpot.h +++ b/drivers/misc/ad525x_dpot.h @@ -195,12 +195,12 @@ enum dpot_devid { struct dpot_data; struct ad_dpot_bus_ops { - int (*read_d8) (void *client); - int (*read_r8d8) (void *client, u8 reg); - int (*read_r8d16) (void *client, u8 reg); - int (*write_d8) (void *client, u8 val); - int (*write_r8d8) (void *client, u8 reg, u8 val); - int (*write_r8d16) (void *client, u8 reg, u16 val); + int (*read_d8)(void *client); + int (*read_r8d8)(void *client, u8 reg); + int (*read_r8d16)(void *client, u8 reg); + int (*write_d8)(void *client, u8 val); + int (*write_r8d8)(void *client, u8 reg, u8 val); + int (*write_r8d16)(void *client, u8 reg, u16 val); }; struct ad_dpot_bus_data { diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c index c9f07032c2fc..ed9412d750b7 100644 --- a/drivers/misc/apds990x.c +++ b/drivers/misc/apds990x.c @@ -715,6 +715,7 @@ static ssize_t apds990x_rate_avail(struct device *dev, { int i; int pos = 0; + for (i = 0; i < ARRAY_SIZE(arates_hz); i++) pos += sprintf(buf + pos, "%d ", arates_hz[i]); sprintf(buf + pos - 1, "\n"); @@ -725,6 +726,7 @@ static ssize_t apds990x_rate_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->arate); } @@ -784,6 +786,7 @@ static ssize_t apds990x_prox_show(struct device *dev, { ssize_t ret; struct apds990x_chip *chip = dev_get_drvdata(dev); + if (pm_runtime_suspended(dev) || !chip->prox_en) return -EIO; @@ -807,6 +810,7 @@ static ssize_t apds990x_prox_enable_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->prox_en); } @@ -847,6 +851,7 @@ static ssize_t apds990x_prox_reporting_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%s\n", reporting_modes[!!chip->prox_continuous_mode]); } @@ -884,6 +889,7 @@ static ssize_t apds990x_lux_thresh_above_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->lux_thres_hi); } @@ -891,6 +897,7 @@ static ssize_t apds990x_lux_thresh_below_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->lux_thres_lo); } @@ -926,6 +933,7 @@ static ssize_t apds990x_lux_thresh_above_store(struct device *dev, { struct apds990x_chip *chip = dev_get_drvdata(dev); int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_hi, buf); + if (ret < 0) return ret; return len; @@ -937,6 +945,7 @@ static ssize_t apds990x_lux_thresh_below_store(struct device *dev, { struct apds990x_chip *chip = dev_get_drvdata(dev); int ret = apds990x_set_lux_thresh(chip, &chip->lux_thres_lo, buf); + if (ret < 0) return ret; return len; @@ -954,6 +963,7 @@ static ssize_t apds990x_prox_threshold_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%d\n", chip->prox_thres); } @@ -1026,6 +1036,7 @@ static ssize_t apds990x_chip_id_show(struct device *dev, struct device_attribute *attr, char *buf) { struct apds990x_chip *chip = dev_get_drvdata(dev); + return sprintf(buf, "%s %d\n", chip->chipname, chip->revision); } diff --git a/drivers/misc/ds1682.c b/drivers/misc/ds1682.c index 7231260ac287..98a921ea9ee8 100644 --- a/drivers/misc/ds1682.c +++ b/drivers/misc/ds1682.c @@ -59,25 +59,42 @@ static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr, { struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); struct i2c_client *client = to_i2c_client(dev); - __le32 val = 0; + unsigned long long val, check; + __le32 val_le = 0; int rc; dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name); /* Read the register */ rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr, - (u8 *) & val); + (u8 *)&val_le); if (rc < 0) return -EIO; - /* Special case: the 32 bit regs are time values with 1/4s - * resolution, scale them up to milliseconds */ - if (sattr->nr == 4) - return sprintf(buf, "%llu\n", - ((unsigned long long)le32_to_cpu(val)) * 250); + val = le32_to_cpu(val_le); - /* Format the output string and return # of bytes */ - return sprintf(buf, "%li\n", (long)le32_to_cpu(val)); + if (sattr->index == DS1682_REG_ELAPSED) { + int retries = 5; + + /* Detect and retry when a tick occurs mid-read */ + do { + rc = i2c_smbus_read_i2c_block_data(client, sattr->index, + sattr->nr, + (u8 *)&val_le); + if (rc < 0 || retries <= 0) + return -EIO; + + check = val; + val = le32_to_cpu(val_le); + retries--; + } while (val != check && val != (check + 1)); + } + + /* Format the output string and return # of bytes + * Special case: the 32 bit regs are time values with 1/4s + * resolution, scale them up to milliseconds + */ + return sprintf(buf, "%llu\n", (sattr->nr == 4) ? (val * 250) : val); } static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr, diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index 5afe4cd16569..9282ffd607ff 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -276,6 +276,9 @@ static int at25_fw_to_chip(struct device *dev, struct spi_eeprom *chip) return -ENODEV; } switch (val) { + case 9: + chip->flags |= EE_INSTR_BIT3_IS_ADDR; + /* fall through */ case 8: chip->flags |= EE_ADDR1; break; diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c index eb29113e0bac..5a17bfeb80d3 100644 --- a/drivers/misc/enclosure.c +++ b/drivers/misc/enclosure.c @@ -468,7 +468,7 @@ static struct class enclosure_class = { .dev_groups = enclosure_class_groups, }; -static const char *const enclosure_status [] = { +static const char *const enclosure_status[] = { [ENCLOSURE_STATUS_UNSUPPORTED] = "unsupported", [ENCLOSURE_STATUS_OK] = "OK", [ENCLOSURE_STATUS_CRITICAL] = "critical", @@ -480,7 +480,7 @@ static const char *const enclosure_status [] = { [ENCLOSURE_STATUS_MAX] = NULL, }; -static const char *const enclosure_type [] = { +static const char *const enclosure_type[] = { [ENCLOSURE_COMPONENT_DEVICE] = "device", [ENCLOSURE_COMPONENT_ARRAY_DEVICE] = "array device", }; @@ -680,13 +680,7 @@ ATTRIBUTE_GROUPS(enclosure_component); static int __init enclosure_init(void) { - int err; - - err = class_register(&enclosure_class); - if (err) - return err; - - return 0; + return class_register(&enclosure_class); } static void __exit enclosure_exit(void) diff --git a/drivers/misc/fsa9480.c b/drivers/misc/fsa9480.c index 71d2793b372c..607b489a6501 100644 --- a/drivers/misc/fsa9480.c +++ b/drivers/misc/fsa9480.c @@ -465,6 +465,7 @@ fail1: static int fsa9480_remove(struct i2c_client *client) { struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client); + if (client->irq) free_irq(client->irq, usbsw); diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c index 4fd21e86ad56..c7cd3675bcd1 100644 --- a/drivers/misc/genwqe/card_base.c +++ b/drivers/misc/genwqe/card_base.c @@ -153,11 +153,11 @@ static struct genwqe_dev *genwqe_dev_alloc(void) cd->card_state = GENWQE_CARD_UNUSED; spin_lock_init(&cd->print_lock); - cd->ddcb_software_timeout = genwqe_ddcb_software_timeout; - cd->kill_timeout = genwqe_kill_timeout; + cd->ddcb_software_timeout = GENWQE_DDCB_SOFTWARE_TIMEOUT; + cd->kill_timeout = GENWQE_KILL_TIMEOUT; for (j = 0; j < GENWQE_MAX_VFS; j++) - cd->vf_jobtimeout_msec[j] = genwqe_vf_jobtimeout_msec; + cd->vf_jobtimeout_msec[j] = GENWQE_VF_JOBTIMEOUT_MSEC; genwqe_devices[i] = cd; return cd; @@ -324,11 +324,11 @@ static bool genwqe_setup_pf_jtimer(struct genwqe_dev *cd) u32 T = genwqe_T_psec(cd); u64 x; - if (genwqe_pf_jobtimeout_msec == 0) + if (GENWQE_PF_JOBTIMEOUT_MSEC == 0) return false; /* PF: large value needed, flash update 2sec per block */ - x = ilog2(genwqe_pf_jobtimeout_msec * + x = ilog2(GENWQE_PF_JOBTIMEOUT_MSEC * 16000000000uL/(T * 15)) - 10; genwqe_write_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, @@ -904,7 +904,7 @@ static int genwqe_reload_bistream(struct genwqe_dev *cd) * b) a critical GFIR occured * * Informational GFIRs are checked and potentially printed in - * health_check_interval seconds. + * GENWQE_HEALTH_CHECK_INTERVAL seconds. */ static int genwqe_health_thread(void *data) { @@ -918,7 +918,7 @@ static int genwqe_health_thread(void *data) rc = wait_event_interruptible_timeout(cd->health_waitq, (genwqe_health_check_cond(cd, &gfir) || (should_stop = kthread_should_stop())), - genwqe_health_check_interval * HZ); + GENWQE_HEALTH_CHECK_INTERVAL * HZ); if (should_stop) break; @@ -1028,7 +1028,7 @@ static int genwqe_health_check_start(struct genwqe_dev *cd) { int rc; - if (genwqe_health_check_interval <= 0) + if (GENWQE_HEALTH_CHECK_INTERVAL <= 0) return 0; /* valid for disabling the service */ /* moved before request_irq() */ diff --git a/drivers/misc/genwqe/card_base.h b/drivers/misc/genwqe/card_base.h index 3743c87f8ab9..1c3967f10f55 100644 --- a/drivers/misc/genwqe/card_base.h +++ b/drivers/misc/genwqe/card_base.h @@ -47,13 +47,13 @@ #define GENWQE_CARD_NO_MAX (16 * GENWQE_MAX_FUNCS) /* Compile parameters, some of them appear in debugfs for later adjustment */ -#define genwqe_ddcb_max 32 /* DDCBs on the work-queue */ -#define genwqe_polling_enabled 0 /* in case of irqs not working */ -#define genwqe_ddcb_software_timeout 10 /* timeout per DDCB in seconds */ -#define genwqe_kill_timeout 8 /* time until process gets killed */ -#define genwqe_vf_jobtimeout_msec 250 /* 250 msec */ -#define genwqe_pf_jobtimeout_msec 8000 /* 8 sec should be ok */ -#define genwqe_health_check_interval 4 /* <= 0: disabled */ +#define GENWQE_DDCB_MAX 32 /* DDCBs on the work-queue */ +#define GENWQE_POLLING_ENABLED 0 /* in case of irqs not working */ +#define GENWQE_DDCB_SOFTWARE_TIMEOUT 10 /* timeout per DDCB in seconds */ +#define GENWQE_KILL_TIMEOUT 8 /* time until process gets killed */ +#define GENWQE_VF_JOBTIMEOUT_MSEC 250 /* 250 msec */ +#define GENWQE_PF_JOBTIMEOUT_MSEC 8000 /* 8 sec should be ok */ +#define GENWQE_HEALTH_CHECK_INTERVAL 4 /* <= 0: disabled */ /* Sysfs attribute groups used when we create the genwqe device */ extern const struct attribute_group *genwqe_attribute_groups[]; @@ -490,11 +490,9 @@ int genwqe_read_app_id(struct genwqe_dev *cd, char *app_name, int len); /* Memory allocation/deallocation; dma address handling */ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, - void *uaddr, unsigned long size, - struct ddcb_requ *req); + void *uaddr, unsigned long size); -int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m, - struct ddcb_requ *req); +int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m); static inline bool dma_mapping_used(struct dma_mapping *m) { diff --git a/drivers/misc/genwqe/card_ddcb.c b/drivers/misc/genwqe/card_ddcb.c index ddfeefe39540..b7f8d35c17a9 100644 --- a/drivers/misc/genwqe/card_ddcb.c +++ b/drivers/misc/genwqe/card_ddcb.c @@ -500,7 +500,7 @@ int __genwqe_wait_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) rc = wait_event_interruptible_timeout(queue->ddcb_waitqs[ddcb_no], ddcb_requ_finished(cd, req), - genwqe_ddcb_software_timeout * HZ); + GENWQE_DDCB_SOFTWARE_TIMEOUT * HZ); /* * We need to distinguish 3 cases here: @@ -633,7 +633,7 @@ int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) __be32 old, new; /* unsigned long flags; */ - if (genwqe_ddcb_software_timeout <= 0) { + if (GENWQE_DDCB_SOFTWARE_TIMEOUT <= 0) { dev_err(&pci_dev->dev, "[%s] err: software timeout is not set!\n", __func__); return -EFAULT; @@ -641,7 +641,7 @@ int __genwqe_purge_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req) pddcb = &queue->ddcb_vaddr[req->num]; - for (t = 0; t < genwqe_ddcb_software_timeout * 10; t++) { + for (t = 0; t < GENWQE_DDCB_SOFTWARE_TIMEOUT * 10; t++) { spin_lock_irqsave(&queue->ddcb_lock, flags); @@ -718,7 +718,7 @@ go_home: dev_err(&pci_dev->dev, "[%s] err: DDCB#%d not purged and not completed after %d seconds QSTAT=%016llx!!\n", - __func__, req->num, genwqe_ddcb_software_timeout, + __func__, req->num, GENWQE_DDCB_SOFTWARE_TIMEOUT, queue_status); print_ddcb_info(cd, req->queue); @@ -778,7 +778,7 @@ int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req, /* FIXME circumvention to improve performance when no irq is * there. */ - if (genwqe_polling_enabled) + if (GENWQE_POLLING_ENABLED) genwqe_check_ddcb_queue(cd, queue); /* @@ -878,7 +878,7 @@ int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req, pddcb->icrc_hsi_shi_32 = cpu_to_be32((u32)icrc << 16); /* enable DDCB completion irq */ - if (!genwqe_polling_enabled) + if (!GENWQE_POLLING_ENABLED) pddcb->icrc_hsi_shi_32 |= DDCB_INTR_BE32; dev_dbg(&pci_dev->dev, "INPUT DDCB#%d\n", req->num); @@ -1028,10 +1028,10 @@ static int setup_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) unsigned int queue_size; struct pci_dev *pci_dev = cd->pci_dev; - if (genwqe_ddcb_max < 2) + if (GENWQE_DDCB_MAX < 2) return -EINVAL; - queue_size = roundup(genwqe_ddcb_max * sizeof(struct ddcb), PAGE_SIZE); + queue_size = roundup(GENWQE_DDCB_MAX * sizeof(struct ddcb), PAGE_SIZE); queue->ddcbs_in_flight = 0; /* statistics */ queue->ddcbs_max_in_flight = 0; @@ -1040,7 +1040,7 @@ static int setup_ddcb_queue(struct genwqe_dev *cd, struct ddcb_queue *queue) queue->wait_on_busy = 0; queue->ddcb_seq = 0x100; /* start sequence number */ - queue->ddcb_max = genwqe_ddcb_max; /* module parameter */ + queue->ddcb_max = GENWQE_DDCB_MAX; queue->ddcb_vaddr = __genwqe_alloc_consistent(cd, queue_size, &queue->ddcb_daddr); if (queue->ddcb_vaddr == NULL) { @@ -1194,7 +1194,7 @@ static int genwqe_card_thread(void *data) genwqe_check_ddcb_queue(cd, &cd->queue); - if (genwqe_polling_enabled) { + if (GENWQE_POLLING_ENABLED) { rc = wait_event_interruptible_timeout( cd->queue_waitq, genwqe_ddcbs_in_flight(cd) || @@ -1340,7 +1340,7 @@ static int queue_wake_up_all(struct genwqe_dev *cd) int genwqe_finish_queue(struct genwqe_dev *cd) { int i, rc = 0, in_flight; - int waitmax = genwqe_ddcb_software_timeout; + int waitmax = GENWQE_DDCB_SOFTWARE_TIMEOUT; struct pci_dev *pci_dev = cd->pci_dev; struct ddcb_queue *queue = &cd->queue; diff --git a/drivers/misc/genwqe/card_debugfs.c b/drivers/misc/genwqe/card_debugfs.c index c715534e7fe7..f921dd590271 100644 --- a/drivers/misc/genwqe/card_debugfs.c +++ b/drivers/misc/genwqe/card_debugfs.c @@ -198,7 +198,7 @@ static int genwqe_jtimer_show(struct seq_file *s, void *unused) jtimer = genwqe_read_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, 0); seq_printf(s, " PF 0x%016llx %d msec\n", jtimer, - genwqe_pf_jobtimeout_msec); + GENWQE_PF_JOBTIMEOUT_MSEC); for (vf_num = 0; vf_num < cd->num_vfs; vf_num++) { jtimer = genwqe_read_vreg(cd, IO_SLC_VF_APPJOB_TIMEOUT, diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c index 3ecfa35457e0..0dd6b5ef314a 100644 --- a/drivers/misc/genwqe/card_dev.c +++ b/drivers/misc/genwqe/card_dev.c @@ -226,7 +226,7 @@ static void genwqe_remove_mappings(struct genwqe_file *cfile) kfree(dma_map); } else if (dma_map->type == GENWQE_MAPPING_SGL_TEMP) { /* we use dma_map statically from the request */ - genwqe_user_vunmap(cd, dma_map, NULL); + genwqe_user_vunmap(cd, dma_map); } } } @@ -249,7 +249,7 @@ static void genwqe_remove_pinnings(struct genwqe_file *cfile) * deleted. */ list_del_init(&dma_map->pin_list); - genwqe_user_vunmap(cd, dma_map, NULL); + genwqe_user_vunmap(cd, dma_map); kfree(dma_map); } } @@ -790,7 +790,7 @@ static int genwqe_pin_mem(struct genwqe_file *cfile, struct genwqe_mem *m) return -ENOMEM; genwqe_mapping_init(dma_map, GENWQE_MAPPING_SGL_PINNED); - rc = genwqe_user_vmap(cd, dma_map, (void *)map_addr, map_size, NULL); + rc = genwqe_user_vmap(cd, dma_map, (void *)map_addr, map_size); if (rc != 0) { dev_err(&pci_dev->dev, "[%s] genwqe_user_vmap rc=%d\n", __func__, rc); @@ -820,7 +820,7 @@ static int genwqe_unpin_mem(struct genwqe_file *cfile, struct genwqe_mem *m) return -ENOENT; genwqe_del_pin(cfile, dma_map); - genwqe_user_vunmap(cd, dma_map, NULL); + genwqe_user_vunmap(cd, dma_map); kfree(dma_map); return 0; } @@ -841,7 +841,7 @@ static int ddcb_cmd_cleanup(struct genwqe_file *cfile, struct ddcb_requ *req) if (dma_mapping_used(dma_map)) { __genwqe_del_mapping(cfile, dma_map); - genwqe_user_vunmap(cd, dma_map, req); + genwqe_user_vunmap(cd, dma_map); } if (req->sgls[i].sgl != NULL) genwqe_free_sync_sgl(cd, &req->sgls[i]); @@ -947,7 +947,7 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req) m->write = 0; rc = genwqe_user_vmap(cd, m, (void *)u_addr, - u_size, req); + u_size); if (rc != 0) goto err_out; @@ -1011,7 +1011,6 @@ static int do_execute_ddcb(struct genwqe_file *cfile, { int rc; struct genwqe_ddcb_cmd *cmd; - struct ddcb_requ *req; struct genwqe_dev *cd = cfile->cd; struct file *filp = cfile->filp; @@ -1019,8 +1018,6 @@ static int do_execute_ddcb(struct genwqe_file *cfile, if (cmd == NULL) return -ENOMEM; - req = container_of(cmd, struct ddcb_requ, cmd); - if (copy_from_user(cmd, (void __user *)arg, sizeof(*cmd))) { ddcb_requ_free(cmd); return -EFAULT; @@ -1345,7 +1342,7 @@ static int genwqe_inform_and_stop_processes(struct genwqe_dev *cd) rc = genwqe_kill_fasync(cd, SIGIO); if (rc > 0) { /* give kill_timeout seconds to close file descriptors ... */ - for (i = 0; (i < genwqe_kill_timeout) && + for (i = 0; (i < GENWQE_KILL_TIMEOUT) && genwqe_open_files(cd); i++) { dev_info(&pci_dev->dev, " %d sec ...", i); @@ -1363,7 +1360,7 @@ static int genwqe_inform_and_stop_processes(struct genwqe_dev *cd) rc = genwqe_force_sig(cd, SIGKILL); /* force terminate */ if (rc) { /* Give kill_timout more seconds to end processes */ - for (i = 0; (i < genwqe_kill_timeout) && + for (i = 0; (i < GENWQE_KILL_TIMEOUT) && genwqe_open_files(cd); i++) { dev_warn(&pci_dev->dev, " %d sec ...", i); diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c index 5c0d917636f7..8f2e6442d88b 100644 --- a/drivers/misc/genwqe/card_utils.c +++ b/drivers/misc/genwqe/card_utils.c @@ -524,22 +524,16 @@ int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl) } /** - * free_user_pages() - Give pinned pages back + * genwqe_free_user_pages() - Give pinned pages back * - * Documentation of get_user_pages is in mm/memory.c: + * Documentation of get_user_pages is in mm/gup.c: * * If the page is written to, set_page_dirty (or set_page_dirty_lock, * as appropriate) must be called after the page is finished with, and * before put_page is called. - * - * FIXME Could be of use to others and might belong in the generic - * code, if others agree. E.g. - * ll_free_user_pages in drivers/staging/lustre/lustre/llite/rw26.c - * ceph_put_page_vector in net/ceph/pagevec.c - * maybe more? */ -static int free_user_pages(struct page **page_list, unsigned int nr_pages, - int dirty) +static int genwqe_free_user_pages(struct page **page_list, + unsigned int nr_pages, int dirty) { unsigned int i; @@ -577,7 +571,7 @@ static int free_user_pages(struct page **page_list, unsigned int nr_pages, * Return: 0 if success */ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, - unsigned long size, struct ddcb_requ *req) + unsigned long size) { int rc = -EINVAL; unsigned long data, offs; @@ -617,7 +611,7 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, /* assumption: get_user_pages can be killed by signals. */ if (rc < m->nr_pages) { - free_user_pages(m->page_list, rc, m->write); + genwqe_free_user_pages(m->page_list, rc, m->write); rc = -EFAULT; goto fail_get_user_pages; } @@ -629,7 +623,7 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, return 0; fail_free_user_pages: - free_user_pages(m->page_list, m->nr_pages, m->write); + genwqe_free_user_pages(m->page_list, m->nr_pages, m->write); fail_get_user_pages: kfree(m->page_list); @@ -647,8 +641,7 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr, * @cd: pointer to genwqe device * @m: mapping params */ -int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m, - struct ddcb_requ *req) +int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m) { struct pci_dev *pci_dev = cd->pci_dev; @@ -662,7 +655,7 @@ int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m, genwqe_unmap_pages(cd, m->dma_list, m->nr_pages); if (m->page_list) { - free_user_pages(m->page_list, m->nr_pages, m->write); + genwqe_free_user_pages(m->page_list, m->nr_pages, m->write); kfree(m->page_list); m->page_list = NULL; diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index 95ce3e891b1b..35693c0a78e2 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Driver for the HP iLO management processor. * * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. * David Altobelli - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include #include diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h index b97672e0cf90..94dfb9e40e29 100644 --- a/drivers/misc/hpilo.h +++ b/drivers/misc/hpilo.h @@ -1,12 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0 /* * linux/drivers/char/hpilo.h * * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. * David Altobelli - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef __HPILO_H #define __HPILO_H diff --git a/drivers/misc/ics932s401.c b/drivers/misc/ics932s401.c index 28f51e01fd2b..81a0541ef3ac 100644 --- a/drivers/misc/ics932s401.c +++ b/drivers/misc/ics932s401.c @@ -33,7 +33,7 @@ static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; /* ICS932S401 registers */ #define ICS932S401_REG_CFG2 0x01 -#define ICS932S401_CFG1_SPREAD 0x01 +#define ICS932S401_CFG1_SPREAD 0x01 #define ICS932S401_REG_CFG7 0x06 #define ICS932S401_FS_MASK 0x07 #define ICS932S401_REG_VENDOR_REV 0x07 @@ -58,7 +58,7 @@ static const unsigned short normal_i2c[] = { 0x69, I2C_CLIENT_END }; #define ICS932S401_REG_SRC_SPREAD1 0x11 #define ICS932S401_REG_SRC_SPREAD2 0x12 #define ICS932S401_REG_CPU_DIVISOR 0x13 -#define ICS932S401_CPU_DIVISOR_SHIFT 4 +#define ICS932S401_CPU_DIVISOR_SHIFT 4 #define ICS932S401_REG_PCISRC_DIVISOR 0x14 #define ICS932S401_SRC_DIVISOR_MASK 0x0F #define ICS932S401_PCI_DIVISOR_SHIFT 4 @@ -225,6 +225,7 @@ static ssize_t show_cpu_clock_sel(struct device *dev, else { /* Freq is neatly wrapped up for us */ int fid = data->regs[ICS932S401_REG_CFG7] & ICS932S401_FS_MASK; + freq = fs_speeds[fid]; if (data->regs[ICS932S401_REG_CTRL] & ICS932S401_CPU_ALT) { switch (freq) { @@ -352,8 +353,7 @@ static DEVICE_ATTR(ref_clock, S_IRUGO, show_value, NULL); static DEVICE_ATTR(cpu_spread, S_IRUGO, show_spread, NULL); static DEVICE_ATTR(src_spread, S_IRUGO, show_spread, NULL); -static struct attribute *ics932s401_attr[] = -{ +static struct attribute *ics932s401_attr[] = { &dev_attr_spread_enabled.attr, &dev_attr_cpu_clock_selection.attr, &dev_attr_cpu_clock.attr, diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c index 976df0013633..b8032882c865 100644 --- a/drivers/misc/isl29003.c +++ b/drivers/misc/isl29003.c @@ -78,6 +78,7 @@ static int __isl29003_read_reg(struct i2c_client *client, u32 reg, u8 mask, u8 shift) { struct isl29003_data *data = i2c_get_clientdata(client); + return (data->reg_cache[reg] & mask) >> shift; } @@ -160,6 +161,7 @@ static int isl29003_get_power_state(struct i2c_client *client) { struct isl29003_data *data = i2c_get_clientdata(client); u8 cmdreg = data->reg_cache[ISL29003_REG_COMMAND]; + return ~cmdreg & ISL29003_ADC_PD; } @@ -196,6 +198,7 @@ static ssize_t isl29003_show_range(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%i\n", isl29003_get_range(client)); } @@ -231,6 +234,7 @@ static ssize_t isl29003_show_resolution(struct device *dev, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", isl29003_get_resolution(client)); } @@ -264,6 +268,7 @@ static ssize_t isl29003_show_mode(struct device *dev, struct device_attribute *attr, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", isl29003_get_mode(client)); } @@ -298,6 +303,7 @@ static ssize_t isl29003_show_power_state(struct device *dev, char *buf) { struct i2c_client *client = to_i2c_client(dev); + return sprintf(buf, "%d\n", isl29003_get_power_state(client)); } @@ -361,6 +367,7 @@ static int isl29003_init_client(struct i2c_client *client) * if one of the reads fails, we consider the init failed */ for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) { int v = i2c_smbus_read_byte_data(client, i); + if (v < 0) return -ENODEV; diff --git a/drivers/misc/lkdtm_core.c b/drivers/misc/lkdtm_core.c index ba92291508dc..4942da93d066 100644 --- a/drivers/misc/lkdtm_core.c +++ b/drivers/misc/lkdtm_core.c @@ -96,7 +96,7 @@ static struct crashpoint crashpoints[] = { CRASHPOINT("DIRECT", NULL), #ifdef CONFIG_KPROBES CRASHPOINT("INT_HARDWARE_ENTRY", "do_IRQ"), - CRASHPOINT("INT_HW_IRQ_EN", "handle_IRQ_event"), + CRASHPOINT("INT_HW_IRQ_EN", "handle_irq_event"), CRASHPOINT("INT_TASKLET_ENTRY", "tasklet_action"), CRASHPOINT("FS_DEVRW", "ll_rw_block"), CRASHPOINT("MEM_SWAPOUT", "shrink_inactive_list"), diff --git a/drivers/misc/lkdtm_heap.c b/drivers/misc/lkdtm_heap.c index f5494a6d4be5..65026d7de130 100644 --- a/drivers/misc/lkdtm_heap.c +++ b/drivers/misc/lkdtm_heap.c @@ -16,6 +16,8 @@ void lkdtm_OVERWRITE_ALLOCATION(void) { size_t len = 1020; u32 *data = kmalloc(len, GFP_KERNEL); + if (!data) + return; data[1024 / sizeof(u32)] = 0x12345678; kfree(data); @@ -33,6 +35,8 @@ void lkdtm_WRITE_AFTER_FREE(void) size_t offset = (len / sizeof(*base)) / 2; base = kmalloc(len, GFP_KERNEL); + if (!base) + return; pr_info("Allocated memory %p-%p\n", base, &base[offset * 2]); pr_info("Attempting bad write to freed memory at %p\n", &base[offset]); diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 1ac10cb64d6e..3e5eabdae8d9 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -543,14 +543,20 @@ int mei_cldev_disable(struct mei_cl_device *cldev) mutex_lock(&bus->device_lock); if (!mei_cl_is_connected(cl)) { - dev_dbg(bus->dev, "Already disconnected"); + dev_dbg(bus->dev, "Already disconnected\n"); + err = 0; + goto out; + } + + if (bus->dev_state == MEI_DEV_POWER_DOWN) { + dev_dbg(bus->dev, "Device is powering down, don't bother with disconnection\n"); err = 0; goto out; } err = mei_cl_disconnect(cl); if (err < 0) - dev_err(bus->dev, "Could not disconnect from the ME client"); + dev_err(bus->dev, "Could not disconnect from the ME client\n"); out: /* Flush queues and remove any pending read */ diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 10dcf4ff99a5..334ab02e1de2 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -1260,7 +1260,9 @@ irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) if (rets == -ENODATA) break; - if (rets && dev->dev_state != MEI_DEV_RESETTING) { + if (rets && + (dev->dev_state != MEI_DEV_RESETTING && + dev->dev_state != MEI_DEV_POWER_DOWN)) { dev_err(dev->dev, "mei_irq_read_handler ret = %d.\n", rets); schedule_work(&dev->reset_work); diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c index 24e4a4c96606..c2c8993e2a51 100644 --- a/drivers/misc/mei/hw-txe.c +++ b/drivers/misc/mei/hw-txe.c @@ -1127,7 +1127,9 @@ irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) if (test_and_clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause)) { /* Read from TXE */ rets = mei_irq_read_handler(dev, &cmpl_list, &slots); - if (rets && dev->dev_state != MEI_DEV_RESETTING) { + if (rets && + (dev->dev_state != MEI_DEV_RESETTING && + dev->dev_state != MEI_DEV_POWER_DOWN)) { dev_err(dev->dev, "mei_irq_read_handler ret = %d.\n", rets); diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index d2f691424dd1..c46f6e99a55e 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -310,6 +310,9 @@ void mei_stop(struct mei_device *dev) { dev_dbg(dev->dev, "stopping the device.\n"); + mutex_lock(&dev->device_lock); + dev->dev_state = MEI_DEV_POWER_DOWN; + mutex_unlock(&dev->device_lock); mei_cl_bus_remove_devices(dev); mei_cancel_work(dev); @@ -319,7 +322,6 @@ void mei_stop(struct mei_device *dev) mutex_lock(&dev->device_lock); - dev->dev_state = MEI_DEV_POWER_DOWN; mei_reset(dev); /* move device to disabled state unconditionally */ dev->dev_state = MEI_DEV_DISABLED; diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index f4f17552c9b8..4a0ccda4d04b 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -238,8 +238,11 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent) */ mei_me_set_pm_domain(dev); - if (mei_pg_is_enabled(dev)) + if (mei_pg_is_enabled(dev)) { pm_runtime_put_noidle(&pdev->dev); + if (hw->d0i3_supported) + pm_runtime_allow(&pdev->dev); + } dev_dbg(&pdev->dev, "initialization successful.\n"); diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c index 4120ed8f0cae..01d1f2ba7bb8 100644 --- a/drivers/misc/mic/vop/vop_vringh.c +++ b/drivers/misc/mic/vop/vop_vringh.c @@ -937,13 +937,10 @@ static long vop_ioctl(struct file *f, unsigned int cmd, unsigned long arg) dd.num_vq > MIC_MAX_VRINGS) return -EINVAL; - dd_config = kzalloc(mic_desc_size(&dd), GFP_KERNEL); - if (!dd_config) - return -ENOMEM; - if (copy_from_user(dd_config, argp, mic_desc_size(&dd))) { - ret = -EFAULT; - goto free_ret; - } + dd_config = memdup_user(argp, mic_desc_size(&dd)); + if (IS_ERR(dd_config)) + return PTR_ERR(dd_config); + /* Ensure desc has not changed between the two reads */ if (memcmp(&dd, dd_config, sizeof(dd))) { ret = -EINVAL; @@ -995,17 +992,12 @@ _unlock_ret: ret = vop_vdev_inited(vdev); if (ret) goto __unlock_ret; - buf = kzalloc(vdev->dd->config_len, GFP_KERNEL); - if (!buf) { - ret = -ENOMEM; + buf = memdup_user(argp, vdev->dd->config_len); + if (IS_ERR(buf)) { + ret = PTR_ERR(buf); goto __unlock_ret; } - if (copy_from_user(buf, argp, vdev->dd->config_len)) { - ret = -EFAULT; - goto done; - } ret = vop_virtio_config_change(vdev, buf); -done: kfree(buf); __unlock_ret: mutex_unlock(&vdev->vdev_mutex); diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c index 2cde80c7bb93..9eea30f54fd6 100644 --- a/drivers/misc/vexpress-syscfg.c +++ b/drivers/misc/vexpress-syscfg.c @@ -270,10 +270,8 @@ static int vexpress_syscfg_probe(struct platform_device *pdev) /* Must use dev.parent (MFD), as that's where DT phandle points at... */ bridge = vexpress_config_bridge_register(pdev->dev.parent, &vexpress_syscfg_bridge_ops, syscfg); - if (IS_ERR(bridge)) - return PTR_ERR(bridge); - return 0; + return PTR_ERR_OR_ZERO(bridge); } static const struct platform_device_id vexpress_syscfg_id_table[] = { diff --git a/drivers/mux/Kconfig b/drivers/mux/Kconfig index 19e4e904c9bf..6241678e99af 100644 --- a/drivers/mux/Kconfig +++ b/drivers/mux/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Multiplexer devices # diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile index 0e1e59760e3f..c3d883955fd5 100644 --- a/drivers/mux/Makefile +++ b/drivers/mux/Makefile @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # Makefile for multiplexer devices. # diff --git a/drivers/mux/adg792a.c b/drivers/mux/adg792a.c index 12aa221ab90d..6a8725cf3d71 100644 --- a/drivers/mux/adg792a.c +++ b/drivers/mux/adg792a.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Multiplexer driver for Analog Devices ADG792A/G Triple 4:1 mux * * Copyright (C) 2017 Axentia Technologies AB * * Author: Peter Rosin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include diff --git a/drivers/mux/core.c b/drivers/mux/core.c index 6e5cf9d9cd99..d1271c1ee23c 100644 --- a/drivers/mux/core.c +++ b/drivers/mux/core.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * Multiplexer subsystem * * Copyright (C) 2017 Axentia Technologies AB * * Author: Peter Rosin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #define pr_fmt(fmt) "mux-core: " fmt diff --git a/drivers/mux/gpio.c b/drivers/mux/gpio.c index 468bf1709606..6fdd9316db8b 100644 --- a/drivers/mux/gpio.c +++ b/drivers/mux/gpio.c @@ -1,13 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * GPIO-controlled multiplexer driver * * Copyright (C) 2017 Axentia Technologies AB * * Author: Peter Rosin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include diff --git a/drivers/mux/mmio.c b/drivers/mux/mmio.c index 37c1de359a70..935ac44aa209 100644 --- a/drivers/mux/mmio.c +++ b/drivers/mux/mmio.c @@ -1,11 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0 /* * MMIO register bitfield-controlled multiplexer driver * * Copyright (C) 2017 Pengutronix, Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #include diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 5a5cefd12153..35a3dbeea324 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -444,7 +444,6 @@ static int nvmem_setup_compat(struct nvmem_device *nvmem, struct nvmem_device *nvmem_register(const struct nvmem_config *config) { struct nvmem_device *nvmem; - struct device_node *np; int rval; if (!config->dev) @@ -464,8 +463,8 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) nvmem->owner = config->owner; if (!nvmem->owner && config->dev->driver) nvmem->owner = config->dev->driver->owner; - nvmem->stride = config->stride; - nvmem->word_size = config->word_size; + nvmem->stride = config->stride ?: 1; + nvmem->word_size = config->word_size ?: 1; nvmem->size = config->size; nvmem->dev.type = &nvmem_provider_type; nvmem->dev.bus = &nvmem_bus_type; @@ -473,13 +472,12 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config) nvmem->priv = config->priv; nvmem->reg_read = config->reg_read; nvmem->reg_write = config->reg_write; - np = config->dev->of_node; - nvmem->dev.of_node = np; + nvmem->dev.of_node = config->dev->of_node; dev_set_name(&nvmem->dev, "%s%d", config->name ? : "nvmem", config->name ? config->id : nvmem->id); - nvmem->read_only = of_property_read_bool(np, "read-only") | + nvmem->read_only = device_property_present(config->dev, "read-only") | config->read_only; if (config->root_only) @@ -600,16 +598,11 @@ static void __nvmem_device_put(struct nvmem_device *nvmem) mutex_unlock(&nvmem_mutex); } -static int nvmem_match(struct device *dev, void *data) -{ - return !strcmp(dev_name(dev), data); -} - static struct nvmem_device *nvmem_find(const char *name) { struct device *d; - d = bus_find_device(&nvmem_bus_type, NULL, (void *)name, nvmem_match); + d = bus_find_device_by_name(&nvmem_bus_type, NULL, name); if (!d) return NULL; diff --git a/drivers/nvmem/rockchip-efuse.c b/drivers/nvmem/rockchip-efuse.c index 123de77ca5d6..f13a8335f364 100644 --- a/drivers/nvmem/rockchip-efuse.c +++ b/drivers/nvmem/rockchip-efuse.c @@ -32,6 +32,14 @@ #define RK3288_STROBE BIT(1) #define RK3288_CSB BIT(0) +#define RK3328_SECURE_SIZES 96 +#define RK3328_INT_STATUS 0x0018 +#define RK3328_DOUT 0x0020 +#define RK3328_AUTO_CTRL 0x0024 +#define RK3328_INT_FINISH BIT(0) +#define RK3328_AUTO_ENB BIT(0) +#define RK3328_AUTO_RD BIT(1) + #define RK3399_A_SHIFT 16 #define RK3399_A_MASK 0x3ff #define RK3399_NBYTES 4 @@ -92,6 +100,60 @@ static int rockchip_rk3288_efuse_read(void *context, unsigned int offset, return 0; } +static int rockchip_rk3328_efuse_read(void *context, unsigned int offset, + void *val, size_t bytes) +{ + struct rockchip_efuse_chip *efuse = context; + unsigned int addr_start, addr_end, addr_offset, addr_len; + u32 out_value, status; + u8 *buf; + int ret, i = 0; + + ret = clk_prepare_enable(efuse->clk); + if (ret < 0) { + dev_err(efuse->dev, "failed to prepare/enable efuse clk\n"); + return ret; + } + + /* 128 Byte efuse, 96 Byte for secure, 32 Byte for non-secure */ + offset += RK3328_SECURE_SIZES; + addr_start = rounddown(offset, RK3399_NBYTES) / RK3399_NBYTES; + addr_end = roundup(offset + bytes, RK3399_NBYTES) / RK3399_NBYTES; + addr_offset = offset % RK3399_NBYTES; + addr_len = addr_end - addr_start; + + buf = kzalloc(sizeof(*buf) * addr_len * RK3399_NBYTES, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto nomem; + } + + while (addr_len--) { + writel(RK3328_AUTO_RD | RK3328_AUTO_ENB | + ((addr_start++ & RK3399_A_MASK) << RK3399_A_SHIFT), + efuse->base + RK3328_AUTO_CTRL); + udelay(4); + status = readl(efuse->base + RK3328_INT_STATUS); + if (!(status & RK3328_INT_FINISH)) { + ret = -EIO; + goto err; + } + out_value = readl(efuse->base + RK3328_DOUT); + writel(RK3328_INT_FINISH, efuse->base + RK3328_INT_STATUS); + + memcpy(&buf[i], &out_value, RK3399_NBYTES); + i += RK3399_NBYTES; + } + + memcpy(val, buf + addr_offset, bytes); +err: + kfree(buf); +nomem: + clk_disable_unprepare(efuse->clk); + + return ret; +} + static int rockchip_rk3399_efuse_read(void *context, unsigned int offset, void *val, size_t bytes) { @@ -180,6 +242,10 @@ static const struct of_device_id rockchip_efuse_match[] = { .compatible = "rockchip,rk3368-efuse", .data = (void *)&rockchip_rk3288_efuse_read, }, + { + .compatible = "rockchip,rk3328-efuse", + .data = (void *)&rockchip_rk3328_efuse_read, + }, { .compatible = "rockchip,rk3399-efuse", .data = (void *)&rockchip_rk3399_efuse_read, @@ -217,7 +283,9 @@ static int rockchip_efuse_probe(struct platform_device *pdev) return PTR_ERR(efuse->clk); efuse->dev = &pdev->dev; - econfig.size = resource_size(res); + if (of_property_read_u32(dev->of_node, "rockchip,efuse-size", + &econfig.size)) + econfig.size = resource_size(res); econfig.reg_read = match->data; econfig.priv = efuse; econfig.dev = efuse->dev; diff --git a/drivers/nvmem/uniphier-efuse.c b/drivers/nvmem/uniphier-efuse.c index 9d278b4e1dc7..be11880a1358 100644 --- a/drivers/nvmem/uniphier-efuse.c +++ b/drivers/nvmem/uniphier-efuse.c @@ -27,11 +27,11 @@ static int uniphier_reg_read(void *context, unsigned int reg, void *_val, size_t bytes) { struct uniphier_efuse_priv *priv = context; - u32 *val = _val; + u8 *val = _val; int offs; - for (offs = 0; offs < bytes; offs += sizeof(u32)) - *val++ = readl(priv->base + reg + offs); + for (offs = 0; offs < bytes; offs += sizeof(u8)) + *val++ = readb(priv->base + reg + offs); return 0; } @@ -53,8 +53,8 @@ static int uniphier_efuse_probe(struct platform_device *pdev) if (IS_ERR(priv->base)) return PTR_ERR(priv->base); - econfig.stride = 4; - econfig.word_size = 4; + econfig.stride = 1; + econfig.word_size = 1; econfig.read_only = true; econfig.reg_read = uniphier_reg_read; econfig.size = resource_size(res); diff --git a/drivers/siox/Kconfig b/drivers/siox/Kconfig new file mode 100644 index 000000000000..083d2e62189a --- /dev/null +++ b/drivers/siox/Kconfig @@ -0,0 +1,18 @@ +menuconfig SIOX + tristate "Eckelmann SIOX Support" + help + SIOX stands for Serial Input Output eXtension and is a synchronous + bus system invented by Eckelmann AG. It is used in their control and + remote monitoring systems for commercial and industrial refrigeration + to drive additional I/O units. + + Unless you know better, it is probably safe to say "no" here. + +if SIOX + +config SIOX_BUS_GPIO + tristate "SIOX GPIO bus driver" + help + SIOX bus driver that controls the four bus lines using GPIOs. + +endif diff --git a/drivers/siox/Makefile b/drivers/siox/Makefile new file mode 100644 index 000000000000..a956f65206d5 --- /dev/null +++ b/drivers/siox/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_SIOX) += siox-core.o +obj-$(CONFIG_SIOX_BUS_GPIO) += siox-bus-gpio.o diff --git a/drivers/siox/siox-bus-gpio.c b/drivers/siox/siox-bus-gpio.c new file mode 100644 index 000000000000..ea7ef982968b --- /dev/null +++ b/drivers/siox/siox-bus-gpio.c @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König + */ + +#include +#include +#include + +#include + +#include "siox.h" + +#define DRIVER_NAME "siox-gpio" + +struct siox_gpio_ddata { + struct gpio_desc *din; + struct gpio_desc *dout; + struct gpio_desc *dclk; + struct gpio_desc *dld; +}; + +static unsigned int siox_clkhigh_ns = 1000; +static unsigned int siox_loadhigh_ns; +static unsigned int siox_bytegap_ns; + +static int siox_gpio_pushpull(struct siox_master *smaster, + size_t setbuf_len, const u8 setbuf[], + size_t getbuf_len, u8 getbuf[]) +{ + struct siox_gpio_ddata *ddata = siox_master_get_devdata(smaster); + size_t i; + size_t cycles = max(setbuf_len, getbuf_len); + + /* reset data and clock */ + gpiod_set_value_cansleep(ddata->dout, 0); + gpiod_set_value_cansleep(ddata->dclk, 0); + + gpiod_set_value_cansleep(ddata->dld, 1); + ndelay(siox_loadhigh_ns); + gpiod_set_value_cansleep(ddata->dld, 0); + + for (i = 0; i < cycles; ++i) { + u8 set = 0, get = 0; + size_t j; + + if (i >= cycles - setbuf_len) + set = setbuf[i - (cycles - setbuf_len)]; + + for (j = 0; j < 8; ++j) { + get <<= 1; + if (gpiod_get_value_cansleep(ddata->din)) + get |= 1; + + /* DOUT is logically inverted */ + gpiod_set_value_cansleep(ddata->dout, !(set & 0x80)); + set <<= 1; + + gpiod_set_value_cansleep(ddata->dclk, 1); + ndelay(siox_clkhigh_ns); + gpiod_set_value_cansleep(ddata->dclk, 0); + } + + if (i < getbuf_len) + getbuf[i] = get; + + ndelay(siox_bytegap_ns); + } + + gpiod_set_value_cansleep(ddata->dld, 1); + ndelay(siox_loadhigh_ns); + gpiod_set_value_cansleep(ddata->dld, 0); + + /* + * Resetting dout isn't necessary protocol wise, but it makes the + * signals more pretty because the dout level is deterministic between + * cycles. Note that this only affects dout between the master and the + * first siox device. dout for the later devices depend on the output of + * the previous siox device. + */ + gpiod_set_value_cansleep(ddata->dout, 0); + + return 0; +} + +static int siox_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct siox_gpio_ddata *ddata; + int ret; + struct siox_master *smaster; + + smaster = siox_master_alloc(&pdev->dev, sizeof(*ddata)); + if (!smaster) { + dev_err(dev, "failed to allocate siox master\n"); + return -ENOMEM; + } + + platform_set_drvdata(pdev, smaster); + ddata = siox_master_get_devdata(smaster); + + ddata->din = devm_gpiod_get(dev, "din", GPIOD_IN); + if (IS_ERR(ddata->din)) { + ret = PTR_ERR(ddata->din); + dev_err(dev, "Failed to get %s GPIO: %d\n", "din", ret); + goto err; + } + + ddata->dout = devm_gpiod_get(dev, "dout", GPIOD_OUT_LOW); + if (IS_ERR(ddata->dout)) { + ret = PTR_ERR(ddata->dout); + dev_err(dev, "Failed to get %s GPIO: %d\n", "dout", ret); + goto err; + } + + ddata->dclk = devm_gpiod_get(dev, "dclk", GPIOD_OUT_LOW); + if (IS_ERR(ddata->dclk)) { + ret = PTR_ERR(ddata->dclk); + dev_err(dev, "Failed to get %s GPIO: %d\n", "dclk", ret); + goto err; + } + + ddata->dld = devm_gpiod_get(dev, "dld", GPIOD_OUT_LOW); + if (IS_ERR(ddata->dld)) { + ret = PTR_ERR(ddata->dld); + dev_err(dev, "Failed to get %s GPIO: %d\n", "dld", ret); + goto err; + } + + smaster->pushpull = siox_gpio_pushpull; + /* XXX: determine automatically like spi does */ + smaster->busno = 0; + + ret = siox_master_register(smaster); + if (ret) { + dev_err(dev, "Failed to register siox master: %d\n", ret); +err: + siox_master_put(smaster); + } + + return ret; +} + +static int siox_gpio_remove(struct platform_device *pdev) +{ + struct siox_master *master = platform_get_drvdata(pdev); + + siox_master_unregister(master); + + return 0; +} + +static const struct of_device_id siox_gpio_dt_ids[] = { + { .compatible = "eckelmann,siox-gpio", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, siox_gpio_dt_ids); + +static struct platform_driver siox_gpio_driver = { + .probe = siox_gpio_probe, + .remove = siox_gpio_remove, + + .driver = { + .name = DRIVER_NAME, + .of_match_table = siox_gpio_dt_ids, + }, +}; +module_platform_driver(siox_gpio_driver); + +MODULE_AUTHOR("Uwe Kleine-Koenig "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/drivers/siox/siox-core.c b/drivers/siox/siox-core.c new file mode 100644 index 000000000000..fdfcdea25867 --- /dev/null +++ b/drivers/siox/siox-core.c @@ -0,0 +1,934 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König + */ +#include +#include +#include +#include +#include + +#include "siox.h" + +/* + * The lowest bit in the SIOX status word signals if the in-device watchdog is + * ok. If the bit is set, the device is functional. + * + * On writing the watchdog timer is reset when this bit toggles. + */ +#define SIOX_STATUS_WDG 0x01 + +/* + * Bits 1 to 3 of the status word read as the bitwise negation of what was + * clocked in before. The value clocked in is changed in each cycle and so + * allows to detect transmit/receive problems. + */ +#define SIOX_STATUS_COUNTER 0x0e + +/* + * Each Siox-Device has a 4 bit type number that is neither 0 nor 15. This is + * available in the upper nibble of the read status. + * + * On write these bits are DC. + */ +#define SIOX_STATUS_TYPE 0xf0 + +#define CREATE_TRACE_POINTS +#include + +static bool siox_is_registered; + +static void siox_master_lock(struct siox_master *smaster) +{ + mutex_lock(&smaster->lock); +} + +static void siox_master_unlock(struct siox_master *smaster) +{ + mutex_unlock(&smaster->lock); +} + +static inline u8 siox_status_clean(u8 status_read, u8 status_written) +{ + /* + * bits 3:1 of status sample the respective bit in the status + * byte written in the previous cycle but inverted. So if you wrote the + * status word as 0xa before (counter = 0b101), it is expected to get + * back the counter bits as 0b010. + * + * So given the last status written this function toggles the there + * unset counter bits in the read value such that the counter bits in + * the return value are all zero iff the bits were read as expected to + * simplify error detection. + */ + + return status_read ^ (~status_written & 0xe); +} + +static bool siox_device_counter_error(struct siox_device *sdevice, + u8 status_clean) +{ + return (status_clean & SIOX_STATUS_COUNTER) != 0; +} + +static bool siox_device_type_error(struct siox_device *sdevice, u8 status_clean) +{ + u8 statustype = (status_clean & SIOX_STATUS_TYPE) >> 4; + + /* + * If the device knows which value the type bits should have, check + * against this value otherwise just rule out the invalid values 0b0000 + * and 0b1111. + */ + if (sdevice->statustype) { + if (statustype != sdevice->statustype) + return true; + } else { + switch (statustype) { + case 0: + case 0xf: + return true; + } + } + + return false; +} + +static bool siox_device_wdg_error(struct siox_device *sdevice, u8 status_clean) +{ + return (status_clean & SIOX_STATUS_WDG) == 0; +} + +/* + * If there is a type or counter error the device is called "unsynced". + */ +bool siox_device_synced(struct siox_device *sdevice) +{ + if (siox_device_type_error(sdevice, sdevice->status_read_clean)) + return false; + + return !siox_device_counter_error(sdevice, sdevice->status_read_clean); + +} +EXPORT_SYMBOL_GPL(siox_device_synced); + +/* + * A device is called "connected" if it is synced and the watchdog is not + * asserted. + */ +bool siox_device_connected(struct siox_device *sdevice) +{ + if (!siox_device_synced(sdevice)) + return false; + + return !siox_device_wdg_error(sdevice, sdevice->status_read_clean); +} +EXPORT_SYMBOL_GPL(siox_device_connected); + +static void siox_poll(struct siox_master *smaster) +{ + struct siox_device *sdevice; + size_t i = smaster->setbuf_len; + unsigned int devno = 0; + int unsync_error = 0; + + smaster->last_poll = jiffies; + + /* + * The counter bits change in each second cycle, the watchdog bit + * toggles each time. + * The counter bits hold values from [0, 6]. 7 would be possible + * theoretically but the protocol designer considered that a bad idea + * for reasons unknown today. (Maybe that's because then the status read + * back has only zeros in the counter bits then which might be confused + * with a stuck-at-0 error. But for the same reason (with s/0/1/) 0 + * could be skipped.) + */ + if (++smaster->status > 0x0d) + smaster->status = 0; + + memset(smaster->buf, 0, smaster->setbuf_len); + + /* prepare data pushed out to devices in buf[0..setbuf_len) */ + list_for_each_entry(sdevice, &smaster->devices, node) { + struct siox_driver *sdriver = + to_siox_driver(sdevice->dev.driver); + sdevice->status_written = smaster->status; + + i -= sdevice->inbytes; + + /* + * If the device or a previous one is unsynced, don't pet the + * watchdog. This is done to ensure that the device is kept in + * reset when something is wrong. + */ + if (!siox_device_synced(sdevice)) + unsync_error = 1; + + if (sdriver && !unsync_error) + sdriver->set_data(sdevice, sdevice->status_written, + &smaster->buf[i + 1]); + else + /* + * Don't trigger watchdog if there is no driver or a + * sync problem + */ + sdevice->status_written &= ~SIOX_STATUS_WDG; + + smaster->buf[i] = sdevice->status_written; + + trace_siox_set_data(smaster, sdevice, devno, i); + + devno++; + } + + smaster->pushpull(smaster, smaster->setbuf_len, smaster->buf, + smaster->getbuf_len, + smaster->buf + smaster->setbuf_len); + + unsync_error = 0; + + /* interpret data pulled in from devices in buf[setbuf_len..] */ + devno = 0; + i = smaster->setbuf_len; + list_for_each_entry(sdevice, &smaster->devices, node) { + struct siox_driver *sdriver = + to_siox_driver(sdevice->dev.driver); + u8 status = smaster->buf[i + sdevice->outbytes - 1]; + u8 status_clean; + u8 prev_status_clean = sdevice->status_read_clean; + bool synced = true; + bool connected = true; + + if (!siox_device_synced(sdevice)) + unsync_error = 1; + + /* + * If the watchdog bit wasn't toggled in this cycle, report the + * watchdog as active to give a consistent view for drivers and + * sysfs consumers. + */ + if (!sdriver || unsync_error) + status &= ~SIOX_STATUS_WDG; + + status_clean = + siox_status_clean(status, + sdevice->status_written_lastcycle); + + /* Check counter bits */ + if (siox_device_counter_error(sdevice, status_clean)) { + bool prev_counter_error; + + synced = false; + + /* only report a new error if the last cycle was ok */ + prev_counter_error = + siox_device_counter_error(sdevice, + prev_status_clean); + if (!prev_counter_error) { + sdevice->status_errors++; + sysfs_notify_dirent(sdevice->status_errors_kn); + } + } + + /* Check type bits */ + if (siox_device_type_error(sdevice, status_clean)) + synced = false; + + /* If the device is unsynced report the watchdog as active */ + if (!synced) { + status &= ~SIOX_STATUS_WDG; + status_clean &= ~SIOX_STATUS_WDG; + } + + if (siox_device_wdg_error(sdevice, status_clean)) + connected = false; + + /* The watchdog state changed just now */ + if ((status_clean ^ prev_status_clean) & SIOX_STATUS_WDG) { + sysfs_notify_dirent(sdevice->watchdog_kn); + + if (siox_device_wdg_error(sdevice, status_clean)) { + struct kernfs_node *wd_errs = + sdevice->watchdog_errors_kn; + + sdevice->watchdog_errors++; + sysfs_notify_dirent(wd_errs); + } + } + + if (connected != sdevice->connected) + sysfs_notify_dirent(sdevice->connected_kn); + + sdevice->status_read_clean = status_clean; + sdevice->status_written_lastcycle = sdevice->status_written; + sdevice->connected = connected; + + trace_siox_get_data(smaster, sdevice, devno, status_clean, i); + + /* only give data read to driver if the device is connected */ + if (sdriver && connected) + sdriver->get_data(sdevice, &smaster->buf[i]); + + devno++; + i += sdevice->outbytes; + } +} + +static int siox_poll_thread(void *data) +{ + struct siox_master *smaster = data; + signed long timeout = 0; + + get_device(&smaster->dev); + + for (;;) { + if (kthread_should_stop()) { + put_device(&smaster->dev); + return 0; + } + + siox_master_lock(smaster); + + if (smaster->active) { + unsigned long next_poll = + smaster->last_poll + smaster->poll_interval; + if (time_is_before_eq_jiffies(next_poll)) + siox_poll(smaster); + + timeout = smaster->poll_interval - + (jiffies - smaster->last_poll); + } else { + timeout = MAX_SCHEDULE_TIMEOUT; + } + + /* + * Set the task to idle while holding the lock. This makes sure + * that we don't sleep too long when the bus is reenabled before + * schedule_timeout is reached. + */ + if (timeout > 0) + set_current_state(TASK_IDLE); + + siox_master_unlock(smaster); + + if (timeout > 0) + schedule_timeout(timeout); + + /* + * I'm not clear if/why it is important to set the state to + * RUNNING again, but it fixes a "do not call blocking ops when + * !TASK_RUNNING;"-warning. + */ + set_current_state(TASK_RUNNING); + } +} + +static int __siox_start(struct siox_master *smaster) +{ + if (!(smaster->setbuf_len + smaster->getbuf_len)) + return -ENODEV; + + if (!smaster->buf) + return -ENOMEM; + + if (smaster->active) + return 0; + + smaster->active = 1; + wake_up_process(smaster->poll_thread); + + return 1; +} + +static int siox_start(struct siox_master *smaster) +{ + int ret; + + siox_master_lock(smaster); + ret = __siox_start(smaster); + siox_master_unlock(smaster); + + return ret; +} + +static int __siox_stop(struct siox_master *smaster) +{ + if (smaster->active) { + struct siox_device *sdevice; + + smaster->active = 0; + + list_for_each_entry(sdevice, &smaster->devices, node) { + if (sdevice->connected) + sysfs_notify_dirent(sdevice->connected_kn); + sdevice->connected = false; + } + + return 1; + } + return 0; +} + +static int siox_stop(struct siox_master *smaster) +{ + int ret; + + siox_master_lock(smaster); + ret = __siox_stop(smaster); + siox_master_unlock(smaster); + + return ret; +} + +static ssize_t type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + + return sprintf(buf, "%s\n", sdev->type); +} + +static DEVICE_ATTR_RO(type); + +static ssize_t inbytes_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + + return sprintf(buf, "%zu\n", sdev->inbytes); +} + +static DEVICE_ATTR_RO(inbytes); + +static ssize_t outbytes_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + + return sprintf(buf, "%zu\n", sdev->outbytes); +} + +static DEVICE_ATTR_RO(outbytes); + +static ssize_t status_errors_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + unsigned int status_errors; + + siox_master_lock(sdev->smaster); + + status_errors = sdev->status_errors; + + siox_master_unlock(sdev->smaster); + + return sprintf(buf, "%u\n", status_errors); +} + +static DEVICE_ATTR_RO(status_errors); + +static ssize_t connected_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + bool connected; + + siox_master_lock(sdev->smaster); + + connected = sdev->connected; + + siox_master_unlock(sdev->smaster); + + return sprintf(buf, "%u\n", connected); +} + +static DEVICE_ATTR_RO(connected); + +static ssize_t watchdog_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + u8 status; + + siox_master_lock(sdev->smaster); + + status = sdev->status_read_clean; + + siox_master_unlock(sdev->smaster); + + return sprintf(buf, "%d\n", status & SIOX_STATUS_WDG); +} + +static DEVICE_ATTR_RO(watchdog); + +static ssize_t watchdog_errors_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_device *sdev = to_siox_device(dev); + unsigned int watchdog_errors; + + siox_master_lock(sdev->smaster); + + watchdog_errors = sdev->watchdog_errors; + + siox_master_unlock(sdev->smaster); + + return sprintf(buf, "%u\n", watchdog_errors); +} + +static DEVICE_ATTR_RO(watchdog_errors); + +static struct attribute *siox_device_attrs[] = { + &dev_attr_type.attr, + &dev_attr_inbytes.attr, + &dev_attr_outbytes.attr, + &dev_attr_status_errors.attr, + &dev_attr_connected.attr, + &dev_attr_watchdog.attr, + &dev_attr_watchdog_errors.attr, + NULL +}; +ATTRIBUTE_GROUPS(siox_device); + +static void siox_device_release(struct device *dev) +{ + struct siox_device *sdevice = to_siox_device(dev); + + kfree(sdevice); +} + +static struct device_type siox_device_type = { + .groups = siox_device_groups, + .release = siox_device_release, +}; + +static int siox_match(struct device *dev, struct device_driver *drv) +{ + if (dev->type != &siox_device_type) + return 0; + + /* up to now there is only a single driver so keeping this simple */ + return 1; +} + +static struct bus_type siox_bus_type = { + .name = "siox", + .match = siox_match, +}; + +static int siox_driver_probe(struct device *dev) +{ + struct siox_driver *sdriver = to_siox_driver(dev->driver); + struct siox_device *sdevice = to_siox_device(dev); + int ret; + + ret = sdriver->probe(sdevice); + return ret; +} + +static int siox_driver_remove(struct device *dev) +{ + struct siox_driver *sdriver = + container_of(dev->driver, struct siox_driver, driver); + struct siox_device *sdevice = to_siox_device(dev); + int ret; + + ret = sdriver->remove(sdevice); + return ret; +} + +static void siox_driver_shutdown(struct device *dev) +{ + struct siox_driver *sdriver = + container_of(dev->driver, struct siox_driver, driver); + struct siox_device *sdevice = to_siox_device(dev); + + sdriver->shutdown(sdevice); +} + +static ssize_t active_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_master *smaster = to_siox_master(dev); + + return sprintf(buf, "%d\n", smaster->active); +} + +static ssize_t active_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct siox_master *smaster = to_siox_master(dev); + int ret; + int active; + + ret = kstrtoint(buf, 0, &active); + if (ret < 0) + return ret; + + if (active) + ret = siox_start(smaster); + else + ret = siox_stop(smaster); + + if (ret < 0) + return ret; + + return count; +} + +static DEVICE_ATTR_RW(active); + +static struct siox_device *siox_device_add(struct siox_master *smaster, + const char *type, size_t inbytes, + size_t outbytes, u8 statustype); + +static ssize_t device_add_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct siox_master *smaster = to_siox_master(dev); + int ret; + char type[20] = ""; + size_t inbytes = 0, outbytes = 0; + u8 statustype = 0; + + ret = sscanf(buf, "%20s %zu %zu %hhu", type, &inbytes, + &outbytes, &statustype); + if (ret != 3 && ret != 4) + return -EINVAL; + + if (strcmp(type, "siox-12x8") || inbytes != 2 || outbytes != 4) + return -EINVAL; + + siox_device_add(smaster, "siox-12x8", inbytes, outbytes, statustype); + + return count; +} + +static DEVICE_ATTR_WO(device_add); + +static void siox_device_remove(struct siox_master *smaster); + +static ssize_t device_remove_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct siox_master *smaster = to_siox_master(dev); + + /* XXX? require to write */ + siox_device_remove(smaster); + + return count; +} + +static DEVICE_ATTR_WO(device_remove); + +static ssize_t poll_interval_ns_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct siox_master *smaster = to_siox_master(dev); + + return sprintf(buf, "%lld\n", jiffies_to_nsecs(smaster->poll_interval)); +} + +static ssize_t poll_interval_ns_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct siox_master *smaster = to_siox_master(dev); + int ret; + u64 val; + + ret = kstrtou64(buf, 0, &val); + if (ret < 0) + return ret; + + siox_master_lock(smaster); + + smaster->poll_interval = nsecs_to_jiffies(val); + + siox_master_unlock(smaster); + + return count; +} + +static DEVICE_ATTR_RW(poll_interval_ns); + +static struct attribute *siox_master_attrs[] = { + &dev_attr_active.attr, + &dev_attr_device_add.attr, + &dev_attr_device_remove.attr, + &dev_attr_poll_interval_ns.attr, + NULL +}; +ATTRIBUTE_GROUPS(siox_master); + +static void siox_master_release(struct device *dev) +{ + struct siox_master *smaster = to_siox_master(dev); + + kfree(smaster); +} + +static struct device_type siox_master_type = { + .groups = siox_master_groups, + .release = siox_master_release, +}; + +struct siox_master *siox_master_alloc(struct device *dev, + size_t size) +{ + struct siox_master *smaster; + + if (!dev) + return NULL; + + smaster = kzalloc(sizeof(*smaster) + size, GFP_KERNEL); + if (!smaster) + return NULL; + + device_initialize(&smaster->dev); + + smaster->busno = -1; + smaster->dev.bus = &siox_bus_type; + smaster->dev.type = &siox_master_type; + smaster->dev.parent = dev; + smaster->poll_interval = DIV_ROUND_UP(HZ, 40); + + dev_set_drvdata(&smaster->dev, &smaster[1]); + + return smaster; +} +EXPORT_SYMBOL_GPL(siox_master_alloc); + +int siox_master_register(struct siox_master *smaster) +{ + int ret; + + if (!siox_is_registered) + return -EPROBE_DEFER; + + if (!smaster->pushpull) + return -EINVAL; + + dev_set_name(&smaster->dev, "siox-%d", smaster->busno); + + smaster->last_poll = jiffies; + smaster->poll_thread = kthread_create(siox_poll_thread, smaster, + "siox-%d", smaster->busno); + if (IS_ERR(smaster->poll_thread)) { + smaster->active = 0; + return PTR_ERR(smaster->poll_thread); + } + + mutex_init(&smaster->lock); + INIT_LIST_HEAD(&smaster->devices); + + ret = device_add(&smaster->dev); + if (ret) + kthread_stop(smaster->poll_thread); + + return ret; +} +EXPORT_SYMBOL_GPL(siox_master_register); + +void siox_master_unregister(struct siox_master *smaster) +{ + /* remove device */ + device_del(&smaster->dev); + + siox_master_lock(smaster); + + __siox_stop(smaster); + + while (smaster->num_devices) { + struct siox_device *sdevice; + + sdevice = container_of(smaster->devices.prev, + struct siox_device, node); + list_del(&sdevice->node); + smaster->num_devices--; + + siox_master_unlock(smaster); + + device_unregister(&sdevice->dev); + + siox_master_lock(smaster); + } + + siox_master_unlock(smaster); + + put_device(&smaster->dev); +} +EXPORT_SYMBOL_GPL(siox_master_unregister); + +static struct siox_device *siox_device_add(struct siox_master *smaster, + const char *type, size_t inbytes, + size_t outbytes, u8 statustype) +{ + struct siox_device *sdevice; + int ret; + size_t buf_len; + + sdevice = kzalloc(sizeof(*sdevice), GFP_KERNEL); + if (!sdevice) + return ERR_PTR(-ENOMEM); + + sdevice->type = type; + sdevice->inbytes = inbytes; + sdevice->outbytes = outbytes; + sdevice->statustype = statustype; + + sdevice->smaster = smaster; + sdevice->dev.parent = &smaster->dev; + sdevice->dev.bus = &siox_bus_type; + sdevice->dev.type = &siox_device_type; + + siox_master_lock(smaster); + + dev_set_name(&sdevice->dev, "siox-%d-%d", + smaster->busno, smaster->num_devices); + + buf_len = smaster->setbuf_len + inbytes + + smaster->getbuf_len + outbytes; + if (smaster->buf_len < buf_len) { + u8 *buf = krealloc(smaster->buf, buf_len, GFP_KERNEL); + + if (!buf) { + dev_err(&smaster->dev, + "failed to realloc buffer to %zu\n", buf_len); + ret = -ENOMEM; + goto err_buf_alloc; + } + + smaster->buf_len = buf_len; + smaster->buf = buf; + } + + ret = device_register(&sdevice->dev); + if (ret) { + dev_err(&smaster->dev, "failed to register device: %d\n", ret); + + goto err_device_register; + } + + smaster->num_devices++; + list_add_tail(&sdevice->node, &smaster->devices); + + smaster->setbuf_len += sdevice->inbytes; + smaster->getbuf_len += sdevice->outbytes; + + sdevice->status_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, + "status_errors"); + sdevice->watchdog_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, + "watchdog"); + sdevice->watchdog_errors_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, + "watchdog_errors"); + sdevice->connected_kn = sysfs_get_dirent(sdevice->dev.kobj.sd, + "connected"); + + siox_master_unlock(smaster); + + return sdevice; + +err_device_register: + /* don't care to make the buffer smaller again */ + +err_buf_alloc: + siox_master_unlock(smaster); + + kfree(sdevice); + + return ERR_PTR(ret); +} + +static void siox_device_remove(struct siox_master *smaster) +{ + struct siox_device *sdevice; + + siox_master_lock(smaster); + + if (!smaster->num_devices) { + siox_master_unlock(smaster); + return; + } + + sdevice = container_of(smaster->devices.prev, struct siox_device, node); + list_del(&sdevice->node); + smaster->num_devices--; + + smaster->setbuf_len -= sdevice->inbytes; + smaster->getbuf_len -= sdevice->outbytes; + + if (!smaster->num_devices) + __siox_stop(smaster); + + siox_master_unlock(smaster); + + /* + * This must be done without holding the master lock because we're + * called from device_remove_store which also holds a sysfs mutex. + * device_unregister tries to aquire the same lock. + */ + device_unregister(&sdevice->dev); +} + +int __siox_driver_register(struct siox_driver *sdriver, struct module *owner) +{ + int ret; + + if (unlikely(!siox_is_registered)) + return -EPROBE_DEFER; + + if (!sdriver->set_data && !sdriver->get_data) { + pr_err("Driver %s doesn't provide needed callbacks\n", + sdriver->driver.name); + return -EINVAL; + } + + sdriver->driver.owner = owner; + sdriver->driver.bus = &siox_bus_type; + + if (sdriver->probe) + sdriver->driver.probe = siox_driver_probe; + if (sdriver->remove) + sdriver->driver.remove = siox_driver_remove; + if (sdriver->shutdown) + sdriver->driver.shutdown = siox_driver_shutdown; + + ret = driver_register(&sdriver->driver); + if (ret) + pr_err("Failed to register siox driver %s (%d)\n", + sdriver->driver.name, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(__siox_driver_register); + +static int __init siox_init(void) +{ + int ret; + + ret = bus_register(&siox_bus_type); + if (ret) { + pr_err("Registration of SIOX bus type failed: %d\n", ret); + return ret; + } + + siox_is_registered = true; + + return 0; +} +subsys_initcall(siox_init); + +static void __exit siox_exit(void) +{ + bus_unregister(&siox_bus_type); +} +module_exit(siox_exit); + +MODULE_AUTHOR("Uwe Kleine-Koenig "); +MODULE_DESCRIPTION("Eckelmann SIOX driver core"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/siox/siox.h b/drivers/siox/siox.h new file mode 100644 index 000000000000..c674bf6fb119 --- /dev/null +++ b/drivers/siox/siox.h @@ -0,0 +1,49 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2015-2017 Pengutronix, Uwe Kleine-König + */ +#include +#include +#include + +#define to_siox_master(_dev) container_of((_dev), struct siox_master, dev) +struct siox_master { + /* these fields should be initialized by the driver */ + int busno; + int (*pushpull)(struct siox_master *smaster, + size_t setbuf_len, const u8 setbuf[], + size_t getbuf_len, u8 getbuf[]); + + /* might be initialized by the driver, if 0 it is set to HZ / 40 */ + unsigned long poll_interval; /* in jiffies */ + + /* framework private stuff */ + struct mutex lock; + bool active; + struct module *owner; + struct device dev; + unsigned int num_devices; + struct list_head devices; + + size_t setbuf_len, getbuf_len; + size_t buf_len; + u8 *buf; + u8 status; + + unsigned long last_poll; + struct task_struct *poll_thread; +}; + +static inline void *siox_master_get_devdata(struct siox_master *smaster) +{ + return dev_get_drvdata(&smaster->dev); +} + +struct siox_master *siox_master_alloc(struct device *dev, size_t size); +static inline void siox_master_put(struct siox_master *smaster) +{ + put_device(&smaster->dev); +} + +int siox_master_register(struct siox_master *smaster); +void siox_master_unregister(struct siox_master *smaster); diff --git a/drivers/slimbus/Kconfig b/drivers/slimbus/Kconfig new file mode 100644 index 000000000000..1a632fad597e --- /dev/null +++ b/drivers/slimbus/Kconfig @@ -0,0 +1,24 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# SLIMbus driver configuration +# +menuconfig SLIMBUS + tristate "SLIMbus support" + help + SLIMbus is standard interface between System-on-Chip and audio codec, + and other peripheral components in typical embedded systems. + + If unsure, choose N. + +if SLIMBUS + +# SLIMbus controllers +config SLIM_QCOM_CTRL + tristate "Qualcomm SLIMbus Manager Component" + depends on SLIMBUS + depends on HAS_IOMEM + help + Select driver if Qualcomm's SLIMbus Manager Component is + programmed using Linux kernel. + +endif diff --git a/drivers/slimbus/Makefile b/drivers/slimbus/Makefile new file mode 100644 index 000000000000..a35a3da4eb78 --- /dev/null +++ b/drivers/slimbus/Makefile @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for kernel SLIMbus framework. +# +obj-$(CONFIG_SLIMBUS) += slimbus.o +slimbus-y := core.o messaging.o sched.o + +#Controllers +obj-$(CONFIG_SLIM_QCOM_CTRL) += slim-qcom-ctrl.o +slim-qcom-ctrl-y := qcom-ctrl.o diff --git a/drivers/slimbus/core.c b/drivers/slimbus/core.c new file mode 100644 index 000000000000..4988a8f4d905 --- /dev/null +++ b/drivers/slimbus/core.c @@ -0,0 +1,480 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "slimbus.h" + +static DEFINE_IDA(ctrl_ida); + +static const struct slim_device_id *slim_match(const struct slim_device_id *id, + const struct slim_device *sbdev) +{ + while (id->manf_id != 0 || id->prod_code != 0) { + if (id->manf_id == sbdev->e_addr.manf_id && + id->prod_code == sbdev->e_addr.prod_code) + return id; + id++; + } + return NULL; +} + +static int slim_device_match(struct device *dev, struct device_driver *drv) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv = to_slim_driver(drv); + + return !!slim_match(sbdrv->id_table, sbdev); +} + +static int slim_device_probe(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv = to_slim_driver(dev->driver); + + return sbdrv->probe(sbdev); +} + +static int slim_device_remove(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + struct slim_driver *sbdrv; + + if (dev->driver) { + sbdrv = to_slim_driver(dev->driver); + if (sbdrv->remove) + sbdrv->remove(sbdev); + } + + return 0; +} + +struct bus_type slimbus_bus = { + .name = "slimbus", + .match = slim_device_match, + .probe = slim_device_probe, + .remove = slim_device_remove, +}; +EXPORT_SYMBOL_GPL(slimbus_bus); + +/* + * __slim_driver_register() - Client driver registration with SLIMbus + * + * @drv:Client driver to be associated with client-device. + * @owner: owning module/driver + * + * This API will register the client driver with the SLIMbus + * It is called from the driver's module-init function. + */ +int __slim_driver_register(struct slim_driver *drv, struct module *owner) +{ + /* ID table and probe are mandatory */ + if (!drv->id_table || !drv->probe) + return -EINVAL; + + drv->driver.bus = &slimbus_bus; + drv->driver.owner = owner; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(__slim_driver_register); + +/* + * slim_driver_unregister() - Undo effect of slim_driver_register + * + * @drv: Client driver to be unregistered + */ +void slim_driver_unregister(struct slim_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(slim_driver_unregister); + +static void slim_dev_release(struct device *dev) +{ + struct slim_device *sbdev = to_slim_device(dev); + + kfree(sbdev); +} + +static int slim_add_device(struct slim_controller *ctrl, + struct slim_device *sbdev, + struct device_node *node) +{ + sbdev->dev.bus = &slimbus_bus; + sbdev->dev.parent = ctrl->dev; + sbdev->dev.release = slim_dev_release; + sbdev->dev.driver = NULL; + sbdev->ctrl = ctrl; + + if (node) + sbdev->dev.of_node = of_node_get(node); + + dev_set_name(&sbdev->dev, "%x:%x:%x:%x", + sbdev->e_addr.manf_id, + sbdev->e_addr.prod_code, + sbdev->e_addr.dev_index, + sbdev->e_addr.instance); + + return device_register(&sbdev->dev); +} + +static struct slim_device *slim_alloc_device(struct slim_controller *ctrl, + struct slim_eaddr *eaddr, + struct device_node *node) +{ + struct slim_device *sbdev; + int ret; + + sbdev = kzalloc(sizeof(*sbdev), GFP_KERNEL); + if (!sbdev) + return NULL; + + sbdev->e_addr = *eaddr; + ret = slim_add_device(ctrl, sbdev, node); + if (ret) { + kfree(sbdev); + return NULL; + } + + return sbdev; +} + +static void of_register_slim_devices(struct slim_controller *ctrl) +{ + struct device *dev = ctrl->dev; + struct device_node *node; + + if (!ctrl->dev->of_node) + return; + + for_each_child_of_node(ctrl->dev->of_node, node) { + struct slim_device *sbdev; + struct slim_eaddr e_addr; + const char *compat = NULL; + int reg[2], ret; + int manf_id, prod_code; + + compat = of_get_property(node, "compatible", NULL); + if (!compat) + continue; + + ret = sscanf(compat, "slim%x,%x", &manf_id, &prod_code); + if (ret != 2) { + dev_err(dev, "Manf ID & Product code not found %s\n", + compat); + continue; + } + + ret = of_property_read_u32_array(node, "reg", reg, 2); + if (ret) { + dev_err(dev, "Device and Instance id not found:%d\n", + ret); + continue; + } + + e_addr.dev_index = reg[0]; + e_addr.instance = reg[1]; + e_addr.manf_id = manf_id; + e_addr.prod_code = prod_code; + + sbdev = slim_alloc_device(ctrl, &e_addr, node); + if (!sbdev) + continue; + } +} + +/* + * slim_register_controller() - Controller bring-up and registration. + * + * @ctrl: Controller to be registered. + * + * A controller is registered with the framework using this API. + * If devices on a controller were registered before controller, + * this will make sure that they get probed when controller is up + */ +int slim_register_controller(struct slim_controller *ctrl) +{ + int id; + + id = ida_simple_get(&ctrl_ida, 0, 0, GFP_KERNEL); + if (id < 0) + return id; + + ctrl->id = id; + + if (!ctrl->min_cg) + ctrl->min_cg = SLIM_MIN_CLK_GEAR; + if (!ctrl->max_cg) + ctrl->max_cg = SLIM_MAX_CLK_GEAR; + + ida_init(&ctrl->laddr_ida); + idr_init(&ctrl->tid_idr); + mutex_init(&ctrl->lock); + mutex_init(&ctrl->sched.m_reconf); + init_completion(&ctrl->sched.pause_comp); + + dev_dbg(ctrl->dev, "Bus [%s] registered:dev:%p\n", + ctrl->name, ctrl->dev); + + of_register_slim_devices(ctrl); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_register_controller); + +/* slim_remove_device: Remove the effect of slim_add_device() */ +static void slim_remove_device(struct slim_device *sbdev) +{ + device_unregister(&sbdev->dev); +} + +static int slim_ctrl_remove_device(struct device *dev, void *null) +{ + slim_remove_device(to_slim_device(dev)); + return 0; +} + +/** + * slim_unregister_controller() - Controller tear-down. + * + * @ctrl: Controller to tear-down. + */ +int slim_unregister_controller(struct slim_controller *ctrl) +{ + /* Remove all clients */ + device_for_each_child(ctrl->dev, NULL, slim_ctrl_remove_device); + /* Enter Clock Pause */ + slim_ctrl_clk_pause(ctrl, false, 0); + ida_simple_remove(&ctrl_ida, ctrl->id); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_unregister_controller); + +static void slim_device_update_status(struct slim_device *sbdev, + enum slim_device_status status) +{ + struct slim_driver *sbdrv; + + if (sbdev->status == status) + return; + + sbdev->status = status; + if (!sbdev->dev.driver) + return; + + sbdrv = to_slim_driver(sbdev->dev.driver); + if (sbdrv->device_status) + sbdrv->device_status(sbdev, sbdev->status); +} + +/** + * slim_report_absent() - Controller calls this function when a device + * reports absent, OR when the device cannot be communicated with + * + * @sbdev: Device that cannot be reached, or sent report absent + */ +void slim_report_absent(struct slim_device *sbdev) +{ + struct slim_controller *ctrl = sbdev->ctrl; + + if (!ctrl) + return; + + /* invalidate logical addresses */ + mutex_lock(&ctrl->lock); + sbdev->is_laddr_valid = false; + mutex_unlock(&ctrl->lock); + + ida_simple_remove(&ctrl->laddr_ida, sbdev->laddr); + slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_DOWN); +} +EXPORT_SYMBOL_GPL(slim_report_absent); + +static bool slim_eaddr_equal(struct slim_eaddr *a, struct slim_eaddr *b) +{ + return (a->manf_id == b->manf_id && + a->prod_code == b->prod_code && + a->dev_index == b->dev_index && + a->instance == b->instance); +} + +static int slim_match_dev(struct device *dev, void *data) +{ + struct slim_eaddr *e_addr = data; + struct slim_device *sbdev = to_slim_device(dev); + + return slim_eaddr_equal(&sbdev->e_addr, e_addr); +} + +static struct slim_device *find_slim_device(struct slim_controller *ctrl, + struct slim_eaddr *eaddr) +{ + struct slim_device *sbdev; + struct device *dev; + + dev = device_find_child(ctrl->dev, eaddr, slim_match_dev); + if (dev) { + sbdev = to_slim_device(dev); + return sbdev; + } + + return NULL; +} + +/** + * slim_get_device() - get handle to a device. + * + * @ctrl: Controller on which this device will be added/queried + * @e_addr: Enumeration address of the device to be queried + * + * Return: pointer to a device if it has already reported. Creates a new + * device and returns pointer to it if the device has not yet enumerated. + */ +struct slim_device *slim_get_device(struct slim_controller *ctrl, + struct slim_eaddr *e_addr) +{ + struct slim_device *sbdev; + + sbdev = find_slim_device(ctrl, e_addr); + if (!sbdev) { + sbdev = slim_alloc_device(ctrl, e_addr, NULL); + if (!sbdev) + return ERR_PTR(-ENOMEM); + } + + return sbdev; +} +EXPORT_SYMBOL_GPL(slim_get_device); + +static int slim_device_alloc_laddr(struct slim_device *sbdev, + bool report_present) +{ + struct slim_controller *ctrl = sbdev->ctrl; + u8 laddr; + int ret; + + mutex_lock(&ctrl->lock); + if (ctrl->get_laddr) { + ret = ctrl->get_laddr(ctrl, &sbdev->e_addr, &laddr); + if (ret < 0) + goto err; + } else if (report_present) { + ret = ida_simple_get(&ctrl->laddr_ida, + 0, SLIM_LA_MANAGER - 1, GFP_KERNEL); + if (ret < 0) + goto err; + + laddr = ret; + } else { + ret = -EINVAL; + goto err; + } + + if (ctrl->set_laddr) { + ret = ctrl->set_laddr(ctrl, &sbdev->e_addr, laddr); + if (ret) { + ret = -EINVAL; + goto err; + } + } + + sbdev->laddr = laddr; + sbdev->is_laddr_valid = true; + + slim_device_update_status(sbdev, SLIM_DEVICE_STATUS_UP); + + dev_dbg(ctrl->dev, "setting slimbus l-addr:%x, ea:%x,%x,%x,%x\n", + laddr, sbdev->e_addr.manf_id, sbdev->e_addr.prod_code, + sbdev->e_addr.dev_index, sbdev->e_addr.instance); + +err: + mutex_unlock(&ctrl->lock); + return ret; + +} + +/** + * slim_device_report_present() - Report enumerated device. + * + * @ctrl: Controller with which device is enumerated. + * @e_addr: Enumeration address of the device. + * @laddr: Return logical address (if valid flag is false) + * + * Called by controller in response to REPORT_PRESENT. Framework will assign + * a logical address to this enumeration address. + * Function returns -EXFULL to indicate that all logical addresses are already + * taken. + */ +int slim_device_report_present(struct slim_controller *ctrl, + struct slim_eaddr *e_addr, u8 *laddr) +{ + struct slim_device *sbdev; + int ret; + + ret = pm_runtime_get_sync(ctrl->dev); + + if (ctrl->sched.clk_state != SLIM_CLK_ACTIVE) { + dev_err(ctrl->dev, "slim ctrl not active,state:%d, ret:%d\n", + ctrl->sched.clk_state, ret); + goto slimbus_not_active; + } + + sbdev = slim_get_device(ctrl, e_addr); + if (IS_ERR(sbdev)) + return -ENODEV; + + if (sbdev->is_laddr_valid) { + *laddr = sbdev->laddr; + return 0; + } + + ret = slim_device_alloc_laddr(sbdev, true); + +slimbus_not_active: + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); + return ret; +} +EXPORT_SYMBOL_GPL(slim_device_report_present); + +/** + * slim_get_logical_addr() - get/allocate logical address of a SLIMbus device. + * + * @sbdev: client handle requesting the address. + * + * Return: zero if a logical address is valid or a new logical address + * has been assigned. error code in case of error. + */ +int slim_get_logical_addr(struct slim_device *sbdev) +{ + if (!sbdev->is_laddr_valid) + return slim_device_alloc_laddr(sbdev, false); + + return 0; +} +EXPORT_SYMBOL_GPL(slim_get_logical_addr); + +static void __exit slimbus_exit(void) +{ + bus_unregister(&slimbus_bus); +} +module_exit(slimbus_exit); + +static int __init slimbus_init(void) +{ + return bus_register(&slimbus_bus); +} +postcore_initcall(slimbus_init); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("SLIMbus core"); diff --git a/drivers/slimbus/messaging.c b/drivers/slimbus/messaging.c new file mode 100644 index 000000000000..884419c37e84 --- /dev/null +++ b/drivers/slimbus/messaging.c @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include +#include +#include "slimbus.h" + +/** + * slim_msg_response() - Deliver Message response received from a device to the + * framework. + * + * @ctrl: Controller handle + * @reply: Reply received from the device + * @len: Length of the reply + * @tid: Transaction ID received with which framework can associate reply. + * + * Called by controller to inform framework about the response received. + * This helps in making the API asynchronous, and controller-driver doesn't need + * to manage 1 more table other than the one managed by framework mapping TID + * with buffers + */ +void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 len) +{ + struct slim_msg_txn *txn; + struct slim_val_inf *msg; + unsigned long flags; + + spin_lock_irqsave(&ctrl->txn_lock, flags); + txn = idr_find(&ctrl->tid_idr, tid); + if (txn == NULL) { + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + return; + } + + msg = txn->msg; + if (msg == NULL || msg->rbuf == NULL) { + dev_err(ctrl->dev, "Got response to invalid TID:%d, len:%d\n", + tid, len); + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + return; + } + + idr_remove(&ctrl->tid_idr, tid); + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + + memcpy(msg->rbuf, reply, len); + if (txn->comp) + complete(txn->comp); + + /* Remove runtime-pm vote now that response was received for TID txn */ + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); +} +EXPORT_SYMBOL_GPL(slim_msg_response); + +/** + * slim_do_transfer() - Process a SLIMbus-messaging transaction + * + * @ctrl: Controller handle + * @txn: Transaction to be sent over SLIMbus + * + * Called by controller to transmit messaging transactions not dealing with + * Interface/Value elements. (e.g. transmittting a message to assign logical + * address to a slave device + * + * Return: -ETIMEDOUT: If transmission of this message timed out + * (e.g. due to bus lines not being clocked or driven by controller) + */ +int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn) +{ + DECLARE_COMPLETION_ONSTACK(done); + bool need_tid = false, clk_pause_msg = false; + unsigned long flags; + int ret, tid, timeout; + + /* + * do not vote for runtime-PM if the transactions are part of clock + * pause sequence + */ + if (ctrl->sched.clk_state == SLIM_CLK_ENTERING_PAUSE && + (txn->mt == SLIM_MSG_MT_CORE && + txn->mc >= SLIM_MSG_MC_BEGIN_RECONFIGURATION && + txn->mc <= SLIM_MSG_MC_RECONFIGURE_NOW)) + clk_pause_msg = true; + + if (!clk_pause_msg) { + ret = pm_runtime_get_sync(ctrl->dev); + if (ctrl->sched.clk_state != SLIM_CLK_ACTIVE) { + dev_err(ctrl->dev, "ctrl wrong state:%d, ret:%d\n", + ctrl->sched.clk_state, ret); + goto slim_xfer_err; + } + } + + need_tid = slim_tid_txn(txn->mt, txn->mc); + + if (need_tid) { + spin_lock_irqsave(&ctrl->txn_lock, flags); + tid = idr_alloc(&ctrl->tid_idr, txn, 0, + SLIM_MAX_TIDS, GFP_ATOMIC); + txn->tid = tid; + + if (!txn->msg->comp) + txn->comp = &done; + else + txn->comp = txn->comp; + + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + + if (tid < 0) + return tid; + } + + ret = ctrl->xfer_msg(ctrl, txn); + + if (ret && need_tid && !txn->msg->comp) { + unsigned long ms = txn->rl + HZ; + + timeout = wait_for_completion_timeout(txn->comp, + msecs_to_jiffies(ms)); + if (!timeout) { + ret = -ETIMEDOUT; + spin_lock_irqsave(&ctrl->txn_lock, flags); + idr_remove(&ctrl->tid_idr, tid); + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + } + } + + if (ret) + dev_err(ctrl->dev, "Tx:MT:0x%x, MC:0x%x, LA:0x%x failed:%d\n", + txn->mt, txn->mc, txn->la, ret); + +slim_xfer_err: + if (!clk_pause_msg && (!need_tid || ret == -ETIMEDOUT)) { + /* + * remove runtime-pm vote if this was TX only, or + * if there was error during this transaction + */ + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_mark_last_busy(ctrl->dev); + } + return ret; +} +EXPORT_SYMBOL_GPL(slim_do_transfer); + +static int slim_val_inf_sanity(struct slim_controller *ctrl, + struct slim_val_inf *msg, u8 mc) +{ + if (!msg || msg->num_bytes > 16 || + (msg->start_offset + msg->num_bytes) > 0xC00) + goto reterr; + switch (mc) { + case SLIM_MSG_MC_REQUEST_VALUE: + case SLIM_MSG_MC_REQUEST_INFORMATION: + if (msg->rbuf != NULL) + return 0; + break; + + case SLIM_MSG_MC_CHANGE_VALUE: + case SLIM_MSG_MC_CLEAR_INFORMATION: + if (msg->wbuf != NULL) + return 0; + break; + + case SLIM_MSG_MC_REQUEST_CHANGE_VALUE: + case SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION: + if (msg->rbuf != NULL && msg->wbuf != NULL) + return 0; + break; + } +reterr: + if (msg) + dev_err(ctrl->dev, "Sanity check failed:msg:offset:0x%x, mc:%d\n", + msg->start_offset, mc); + return -EINVAL; +} + +static u16 slim_slicesize(int code) +{ + static const u8 sizetocode[16] = { + 0, 1, 2, 3, 3, 4, 4, 5, 5, 5, 5, 6, 6, 6, 6, 7 + }; + + clamp(code, 1, (int)ARRAY_SIZE(sizetocode)); + + return sizetocode[code - 1]; +} + +/** + * slim_xfer_msg() - Transfer a value info message on slim device + * + * @sbdev: slim device to which this msg has to be transfered + * @msg: value info message pointer + * @mc: message code of the message + * + * Called by drivers which want to transfer a vlaue or info elements. + * + * Return: -ETIMEDOUT: If transmission of this message timed out + */ +int slim_xfer_msg(struct slim_device *sbdev, struct slim_val_inf *msg, + u8 mc) +{ + DEFINE_SLIM_LDEST_TXN(txn_stack, mc, 6, sbdev->laddr, msg); + struct slim_msg_txn *txn = &txn_stack; + struct slim_controller *ctrl = sbdev->ctrl; + int ret; + u16 sl; + + if (!ctrl) + return -EINVAL; + + ret = slim_val_inf_sanity(ctrl, msg, mc); + if (ret) + return ret; + + sl = slim_slicesize(msg->num_bytes); + + dev_dbg(ctrl->dev, "SB xfer msg:os:%x, len:%d, MC:%x, sl:%x\n", + msg->start_offset, msg->num_bytes, mc, sl); + + txn->ec = ((sl | (1 << 3)) | ((msg->start_offset & 0xFFF) << 4)); + + switch (mc) { + case SLIM_MSG_MC_REQUEST_CHANGE_VALUE: + case SLIM_MSG_MC_CHANGE_VALUE: + case SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION: + case SLIM_MSG_MC_CLEAR_INFORMATION: + txn->rl += msg->num_bytes; + default: + break; + } + + if (slim_tid_txn(txn->mt, txn->mc)) + txn->rl++; + + return slim_do_transfer(ctrl, txn); +} +EXPORT_SYMBOL_GPL(slim_xfer_msg); + +static void slim_fill_msg(struct slim_val_inf *msg, u32 addr, + size_t count, u8 *rbuf, u8 *wbuf) +{ + msg->start_offset = addr; + msg->num_bytes = count; + msg->rbuf = rbuf; + msg->wbuf = wbuf; +} + +/** + * slim_read() - Read SLIMbus value element + * + * @sdev: client handle. + * @addr: address of value element to read. + * @count: number of bytes to read. Maximum bytes allowed are 16. + * @val: will return what the value element value was + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + */ +int slim_read(struct slim_device *sdev, u32 addr, size_t count, u8 *val) +{ + struct slim_val_inf msg; + + slim_fill_msg(&msg, addr, count, val, NULL); + + return slim_xfer_msg(sdev, &msg, SLIM_MSG_MC_REQUEST_VALUE); +} +EXPORT_SYMBOL_GPL(slim_read); + +/** + * slim_readb() - Read byte from SLIMbus value element + * + * @sdev: client handle. + * @addr: address in the value element to read. + * + * Return: byte value of value element. + */ +int slim_readb(struct slim_device *sdev, u32 addr) +{ + int ret; + u8 buf; + + ret = slim_read(sdev, addr, 1, &buf); + if (ret < 0) + return ret; + else + return buf; +} +EXPORT_SYMBOL_GPL(slim_readb); + +/** + * slim_write() - Write SLIMbus value element + * + * @sdev: client handle. + * @addr: address in the value element to write. + * @count: number of bytes to write. Maximum bytes allowed are 16. + * @val: value to write to value element + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + */ +int slim_write(struct slim_device *sdev, u32 addr, size_t count, u8 *val) +{ + struct slim_val_inf msg; + + slim_fill_msg(&msg, addr, count, val, NULL); + + return slim_xfer_msg(sdev, &msg, SLIM_MSG_MC_CHANGE_VALUE); +} +EXPORT_SYMBOL_GPL(slim_write); + +/** + * slim_writeb() - Write byte to SLIMbus value element + * + * @sdev: client handle. + * @addr: address of value element to write. + * @value: value to write to value element + * + * Return: -EINVAL for Invalid parameters, -ETIMEDOUT If transmission of + * this message timed out (e.g. due to bus lines not being clocked + * or driven by controller) + * + */ +int slim_writeb(struct slim_device *sdev, u32 addr, u8 value) +{ + return slim_write(sdev, addr, 1, &value); +} +EXPORT_SYMBOL_GPL(slim_writeb); diff --git a/drivers/slimbus/qcom-ctrl.c b/drivers/slimbus/qcom-ctrl.c new file mode 100644 index 000000000000..ffb46f915334 --- /dev/null +++ b/drivers/slimbus/qcom-ctrl.c @@ -0,0 +1,747 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "slimbus.h" + +/* Manager registers */ +#define MGR_CFG 0x200 +#define MGR_STATUS 0x204 +#define MGR_INT_EN 0x210 +#define MGR_INT_STAT 0x214 +#define MGR_INT_CLR 0x218 +#define MGR_TX_MSG 0x230 +#define MGR_RX_MSG 0x270 +#define MGR_IE_STAT 0x2F0 +#define MGR_VE_STAT 0x300 +#define MGR_CFG_ENABLE 1 + +/* Framer registers */ +#define FRM_CFG 0x400 +#define FRM_STAT 0x404 +#define FRM_INT_EN 0x410 +#define FRM_INT_STAT 0x414 +#define FRM_INT_CLR 0x418 +#define FRM_WAKEUP 0x41C +#define FRM_CLKCTL_DONE 0x420 +#define FRM_IE_STAT 0x430 +#define FRM_VE_STAT 0x440 + +/* Interface registers */ +#define INTF_CFG 0x600 +#define INTF_STAT 0x604 +#define INTF_INT_EN 0x610 +#define INTF_INT_STAT 0x614 +#define INTF_INT_CLR 0x618 +#define INTF_IE_STAT 0x630 +#define INTF_VE_STAT 0x640 + +/* Interrupt status bits */ +#define MGR_INT_TX_NACKED_2 BIT(25) +#define MGR_INT_MSG_BUF_CONTE BIT(26) +#define MGR_INT_RX_MSG_RCVD BIT(30) +#define MGR_INT_TX_MSG_SENT BIT(31) + +/* Framer config register settings */ +#define FRM_ACTIVE 1 +#define CLK_GEAR 7 +#define ROOT_FREQ 11 +#define REF_CLK_GEAR 15 +#define INTR_WAKE 19 + +#define SLIM_MSG_ASM_FIRST_WORD(l, mt, mc, dt, ad) \ + ((l) | ((mt) << 5) | ((mc) << 8) | ((dt) << 15) | ((ad) << 16)) + +#define SLIM_ROOT_FREQ 24576000 +#define QCOM_SLIM_AUTOSUSPEND 1000 + +/* MAX message size over control channel */ +#define SLIM_MSGQ_BUF_LEN 40 +#define QCOM_TX_MSGS 2 +#define QCOM_RX_MSGS 8 +#define QCOM_BUF_ALLOC_RETRIES 10 + +#define CFG_PORT(r, v) ((v) ? CFG_PORT_V2(r) : CFG_PORT_V1(r)) + +/* V2 Component registers */ +#define CFG_PORT_V2(r) ((r ## _V2)) +#define COMP_CFG_V2 4 +#define COMP_TRUST_CFG_V2 0x3000 + +/* V1 Component registers */ +#define CFG_PORT_V1(r) ((r ## _V1)) +#define COMP_CFG_V1 0 +#define COMP_TRUST_CFG_V1 0x14 + +/* Resource group info for manager, and non-ported generic device-components */ +#define EE_MGR_RSC_GRP (1 << 10) +#define EE_NGD_2 (2 << 6) +#define EE_NGD_1 0 + +struct slim_ctrl_buf { + void *base; + spinlock_t lock; + int head; + int tail; + int sl_sz; + int n; +}; + +struct qcom_slim_ctrl { + struct slim_controller ctrl; + struct slim_framer framer; + struct device *dev; + void __iomem *base; + void __iomem *slew_reg; + + struct slim_ctrl_buf rx; + struct slim_ctrl_buf tx; + + struct completion **wr_comp; + int irq; + struct workqueue_struct *rxwq; + struct work_struct wd; + struct clk *rclk; + struct clk *hclk; +}; + +static void qcom_slim_queue_tx(struct qcom_slim_ctrl *ctrl, void *buf, + u8 len, u32 tx_reg) +{ + int count = (len + 3) >> 2; + + __iowrite32_copy(ctrl->base + tx_reg, buf, count); + + /* Ensure Oder of subsequent writes */ + mb(); +} + +static void *slim_alloc_rxbuf(struct qcom_slim_ctrl *ctrl) +{ + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->rx.lock, flags); + if ((ctrl->rx.tail + 1) % ctrl->rx.n == ctrl->rx.head) { + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + dev_err(ctrl->dev, "RX QUEUE full!"); + return NULL; + } + idx = ctrl->rx.tail; + ctrl->rx.tail = (ctrl->rx.tail + 1) % ctrl->rx.n; + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + + return ctrl->rx.base + (idx * ctrl->rx.sl_sz); +} + +static void slim_ack_txn(struct qcom_slim_ctrl *ctrl, int err) +{ + struct completion *comp; + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->tx.lock, flags); + idx = ctrl->tx.head; + ctrl->tx.head = (ctrl->tx.head + 1) % ctrl->tx.n; + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + + comp = ctrl->wr_comp[idx]; + ctrl->wr_comp[idx] = NULL; + + complete(comp); +} + +static irqreturn_t qcom_slim_handle_tx_irq(struct qcom_slim_ctrl *ctrl, + u32 stat) +{ + int err = 0; + + if (stat & MGR_INT_TX_MSG_SENT) + writel_relaxed(MGR_INT_TX_MSG_SENT, + ctrl->base + MGR_INT_CLR); + + if (stat & MGR_INT_TX_NACKED_2) { + u32 mgr_stat = readl_relaxed(ctrl->base + MGR_STATUS); + u32 mgr_ie_stat = readl_relaxed(ctrl->base + MGR_IE_STAT); + u32 frm_stat = readl_relaxed(ctrl->base + FRM_STAT); + u32 frm_cfg = readl_relaxed(ctrl->base + FRM_CFG); + u32 frm_intr_stat = readl_relaxed(ctrl->base + FRM_INT_STAT); + u32 frm_ie_stat = readl_relaxed(ctrl->base + FRM_IE_STAT); + u32 intf_stat = readl_relaxed(ctrl->base + INTF_STAT); + u32 intf_intr_stat = readl_relaxed(ctrl->base + INTF_INT_STAT); + u32 intf_ie_stat = readl_relaxed(ctrl->base + INTF_IE_STAT); + + writel_relaxed(MGR_INT_TX_NACKED_2, ctrl->base + MGR_INT_CLR); + + dev_err(ctrl->dev, "TX Nack MGR:int:0x%x, stat:0x%x\n", + stat, mgr_stat); + dev_err(ctrl->dev, "TX Nack MGR:ie:0x%x\n", mgr_ie_stat); + dev_err(ctrl->dev, "TX Nack FRM:int:0x%x, stat:0x%x\n", + frm_intr_stat, frm_stat); + dev_err(ctrl->dev, "TX Nack FRM:cfg:0x%x, ie:0x%x\n", + frm_cfg, frm_ie_stat); + dev_err(ctrl->dev, "TX Nack INTF:intr:0x%x, stat:0x%x\n", + intf_intr_stat, intf_stat); + dev_err(ctrl->dev, "TX Nack INTF:ie:0x%x\n", + intf_ie_stat); + err = -ENOTCONN; + } + + slim_ack_txn(ctrl, err); + + return IRQ_HANDLED; +} + +static irqreturn_t qcom_slim_handle_rx_irq(struct qcom_slim_ctrl *ctrl, + u32 stat) +{ + u32 *rx_buf, pkt[10]; + bool q_rx = false; + u8 mc, mt, len; + + pkt[0] = readl_relaxed(ctrl->base + MGR_RX_MSG); + mt = SLIM_HEADER_GET_MT(pkt[0]); + len = SLIM_HEADER_GET_RL(pkt[0]); + mc = SLIM_HEADER_GET_MC(pkt[0]>>8); + + /* + * this message cannot be handled by ISR, so + * let work-queue handle it + */ + if (mt == SLIM_MSG_MT_CORE && mc == SLIM_MSG_MC_REPORT_PRESENT) { + rx_buf = (u32 *)slim_alloc_rxbuf(ctrl); + if (!rx_buf) { + dev_err(ctrl->dev, "dropping RX:0x%x due to RX full\n", + pkt[0]); + goto rx_ret_irq; + } + rx_buf[0] = pkt[0]; + + } else { + rx_buf = pkt; + } + + __ioread32_copy(rx_buf + 1, ctrl->base + MGR_RX_MSG + 4, + DIV_ROUND_UP(len, 4)); + + switch (mc) { + + case SLIM_MSG_MC_REPORT_PRESENT: + q_rx = true; + break; + case SLIM_MSG_MC_REPLY_INFORMATION: + case SLIM_MSG_MC_REPLY_VALUE: + slim_msg_response(&ctrl->ctrl, (u8 *)(rx_buf + 1), + (u8)(*rx_buf >> 24), (len - 4)); + break; + default: + dev_err(ctrl->dev, "unsupported MC,%x MT:%x\n", + mc, mt); + break; + } +rx_ret_irq: + writel(MGR_INT_RX_MSG_RCVD, ctrl->base + + MGR_INT_CLR); + if (q_rx) + queue_work(ctrl->rxwq, &ctrl->wd); + + return IRQ_HANDLED; +} + +static irqreturn_t qcom_slim_interrupt(int irq, void *d) +{ + struct qcom_slim_ctrl *ctrl = d; + u32 stat = readl_relaxed(ctrl->base + MGR_INT_STAT); + int ret = IRQ_NONE; + + if (stat & MGR_INT_TX_MSG_SENT || stat & MGR_INT_TX_NACKED_2) + ret = qcom_slim_handle_tx_irq(ctrl, stat); + + if (stat & MGR_INT_RX_MSG_RCVD) + ret = qcom_slim_handle_rx_irq(ctrl, stat); + + return ret; +} + +static int qcom_clk_pause_wakeup(struct slim_controller *sctrl) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + + clk_prepare_enable(ctrl->hclk); + clk_prepare_enable(ctrl->rclk); + enable_irq(ctrl->irq); + + writel_relaxed(1, ctrl->base + FRM_WAKEUP); + /* Make sure framer wakeup write goes through before ISR fires */ + mb(); + /* + * HW Workaround: Currently, slave is reporting lost-sync messages + * after SLIMbus comes out of clock pause. + * Transaction with slave fail before slave reports that message + * Give some time for that report to come + * SLIMbus wakes up in clock gear 10 at 24.576MHz. With each superframe + * being 250 usecs, we wait for 5-10 superframes here to ensure + * we get the message + */ + usleep_range(1250, 2500); + return 0; +} + +static void *slim_alloc_txbuf(struct qcom_slim_ctrl *ctrl, + struct slim_msg_txn *txn, + struct completion *done) +{ + unsigned long flags; + int idx; + + spin_lock_irqsave(&ctrl->tx.lock, flags); + if (((ctrl->tx.head + 1) % ctrl->tx.n) == ctrl->tx.tail) { + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + dev_err(ctrl->dev, "controller TX buf unavailable"); + return NULL; + } + idx = ctrl->tx.tail; + ctrl->wr_comp[idx] = done; + ctrl->tx.tail = (ctrl->tx.tail + 1) % ctrl->tx.n; + + spin_unlock_irqrestore(&ctrl->tx.lock, flags); + + return ctrl->tx.base + (idx * ctrl->tx.sl_sz); +} + + +static int qcom_xfer_msg(struct slim_controller *sctrl, + struct slim_msg_txn *txn) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + DECLARE_COMPLETION_ONSTACK(done); + void *pbuf = slim_alloc_txbuf(ctrl, txn, &done); + unsigned long ms = txn->rl + HZ; + u8 *puc; + int ret = 0, timeout, retries = QCOM_BUF_ALLOC_RETRIES; + u8 la = txn->la; + u32 *head; + /* HW expects length field to be excluded */ + txn->rl--; + + /* spin till buffer is made available */ + if (!pbuf) { + while (retries--) { + usleep_range(10000, 15000); + pbuf = slim_alloc_txbuf(ctrl, txn, &done); + if (pbuf) + break; + } + } + + if (retries < 0 && !pbuf) + return -ENOMEM; + + puc = (u8 *)pbuf; + head = (u32 *)pbuf; + + if (txn->dt == SLIM_MSG_DEST_LOGICALADDR) { + *head = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, + txn->mc, 0, la); + puc += 3; + } else { + *head = SLIM_MSG_ASM_FIRST_WORD(txn->rl, txn->mt, + txn->mc, 1, la); + puc += 2; + } + + if (slim_tid_txn(txn->mt, txn->mc)) + *(puc++) = txn->tid; + + if (slim_ec_txn(txn->mt, txn->mc)) { + *(puc++) = (txn->ec & 0xFF); + *(puc++) = (txn->ec >> 8) & 0xFF; + } + + if (txn->msg && txn->msg->wbuf) + memcpy(puc, txn->msg->wbuf, txn->msg->num_bytes); + + qcom_slim_queue_tx(ctrl, head, txn->rl, MGR_TX_MSG); + timeout = wait_for_completion_timeout(&done, msecs_to_jiffies(ms)); + + if (!timeout) { + dev_err(ctrl->dev, "TX timed out:MC:0x%x,mt:0x%x", txn->mc, + txn->mt); + ret = -ETIMEDOUT; + } + + return ret; + +} + +static int qcom_set_laddr(struct slim_controller *sctrl, + struct slim_eaddr *ead, u8 laddr) +{ + struct qcom_slim_ctrl *ctrl = dev_get_drvdata(sctrl->dev); + struct { + __be16 manf_id; + __be16 prod_code; + u8 dev_index; + u8 instance; + u8 laddr; + } __packed p; + struct slim_val_inf msg = {0}; + DEFINE_SLIM_EDEST_TXN(txn, SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS, + 10, laddr, &msg); + int ret; + + p.manf_id = cpu_to_be16(ead->manf_id); + p.prod_code = cpu_to_be16(ead->prod_code); + p.dev_index = ead->dev_index; + p.instance = ead->instance; + p.laddr = laddr; + + msg.wbuf = (void *)&p; + msg.num_bytes = 7; + ret = slim_do_transfer(&ctrl->ctrl, &txn); + + if (ret) + dev_err(ctrl->dev, "set LA:0x%x failed:ret:%d\n", + laddr, ret); + return ret; +} + +static int slim_get_current_rxbuf(struct qcom_slim_ctrl *ctrl, void *buf) +{ + unsigned long flags; + + spin_lock_irqsave(&ctrl->rx.lock, flags); + if (ctrl->rx.tail == ctrl->rx.head) { + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + return -ENODATA; + } + memcpy(buf, ctrl->rx.base + (ctrl->rx.head * ctrl->rx.sl_sz), + ctrl->rx.sl_sz); + + ctrl->rx.head = (ctrl->rx.head + 1) % ctrl->rx.n; + spin_unlock_irqrestore(&ctrl->rx.lock, flags); + + return 0; +} + +static void qcom_slim_rxwq(struct work_struct *work) +{ + u8 buf[SLIM_MSGQ_BUF_LEN]; + u8 mc, mt, len; + int ret; + struct qcom_slim_ctrl *ctrl = container_of(work, struct qcom_slim_ctrl, + wd); + + while ((slim_get_current_rxbuf(ctrl, buf)) != -ENODATA) { + len = SLIM_HEADER_GET_RL(buf[0]); + mt = SLIM_HEADER_GET_MT(buf[0]); + mc = SLIM_HEADER_GET_MC(buf[1]); + if (mt == SLIM_MSG_MT_CORE && + mc == SLIM_MSG_MC_REPORT_PRESENT) { + struct slim_eaddr ea; + u8 laddr; + + ea.manf_id = be16_to_cpup((__be16 *)&buf[2]); + ea.prod_code = be16_to_cpup((__be16 *)&buf[4]); + ea.dev_index = buf[6]; + ea.instance = buf[7]; + + ret = slim_device_report_present(&ctrl->ctrl, &ea, + &laddr); + if (ret < 0) + dev_err(ctrl->dev, "assign laddr failed:%d\n", + ret); + } else { + dev_err(ctrl->dev, "unexpected message:mc:%x, mt:%x\n", + mc, mt); + } + } +} + +static void qcom_slim_prg_slew(struct platform_device *pdev, + struct qcom_slim_ctrl *ctrl) +{ + struct resource *slew_mem; + + if (!ctrl->slew_reg) { + /* SLEW RATE register for this SLIMbus */ + slew_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "slew"); + ctrl->slew_reg = devm_ioremap(&pdev->dev, slew_mem->start, + resource_size(slew_mem)); + if (!ctrl->slew_reg) + return; + } + + writel_relaxed(1, ctrl->slew_reg); + /* Make sure SLIMbus-slew rate enabling goes through */ + wmb(); +} + +static int qcom_slim_probe(struct platform_device *pdev) +{ + struct qcom_slim_ctrl *ctrl; + struct slim_controller *sctrl; + struct resource *slim_mem; + int ret, ver; + + ctrl = devm_kzalloc(&pdev->dev, sizeof(*ctrl), GFP_KERNEL); + if (!ctrl) + return -ENOMEM; + + ctrl->hclk = devm_clk_get(&pdev->dev, "iface"); + if (IS_ERR(ctrl->hclk)) + return PTR_ERR(ctrl->hclk); + + ctrl->rclk = devm_clk_get(&pdev->dev, "core"); + if (IS_ERR(ctrl->rclk)) + return PTR_ERR(ctrl->rclk); + + ret = clk_set_rate(ctrl->rclk, SLIM_ROOT_FREQ); + if (ret) { + dev_err(&pdev->dev, "ref-clock set-rate failed:%d\n", ret); + return ret; + } + + ctrl->irq = platform_get_irq(pdev, 0); + if (!ctrl->irq) { + dev_err(&pdev->dev, "no slimbus IRQ\n"); + return -ENODEV; + } + + sctrl = &ctrl->ctrl; + sctrl->dev = &pdev->dev; + ctrl->dev = &pdev->dev; + platform_set_drvdata(pdev, ctrl); + dev_set_drvdata(ctrl->dev, ctrl); + + slim_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ctrl"); + ctrl->base = devm_ioremap_resource(ctrl->dev, slim_mem); + if (IS_ERR(ctrl->base)) { + dev_err(&pdev->dev, "IOremap failed\n"); + return PTR_ERR(ctrl->base); + } + + sctrl->set_laddr = qcom_set_laddr; + sctrl->xfer_msg = qcom_xfer_msg; + sctrl->wakeup = qcom_clk_pause_wakeup; + ctrl->tx.n = QCOM_TX_MSGS; + ctrl->tx.sl_sz = SLIM_MSGQ_BUF_LEN; + ctrl->rx.n = QCOM_RX_MSGS; + ctrl->rx.sl_sz = SLIM_MSGQ_BUF_LEN; + ctrl->wr_comp = kzalloc(sizeof(struct completion *) * QCOM_TX_MSGS, + GFP_KERNEL); + if (!ctrl->wr_comp) + return -ENOMEM; + + spin_lock_init(&ctrl->rx.lock); + spin_lock_init(&ctrl->tx.lock); + INIT_WORK(&ctrl->wd, qcom_slim_rxwq); + ctrl->rxwq = create_singlethread_workqueue("qcom_slim_rx"); + if (!ctrl->rxwq) { + dev_err(ctrl->dev, "Failed to start Rx WQ\n"); + return -ENOMEM; + } + + ctrl->framer.rootfreq = SLIM_ROOT_FREQ / 8; + ctrl->framer.superfreq = + ctrl->framer.rootfreq / SLIM_CL_PER_SUPERFRAME_DIV8; + sctrl->a_framer = &ctrl->framer; + sctrl->clkgear = SLIM_MAX_CLK_GEAR; + + qcom_slim_prg_slew(pdev, ctrl); + + ret = devm_request_irq(&pdev->dev, ctrl->irq, qcom_slim_interrupt, + IRQF_TRIGGER_HIGH, "qcom_slim_irq", ctrl); + if (ret) { + dev_err(&pdev->dev, "request IRQ failed\n"); + goto err_request_irq_failed; + } + + ret = clk_prepare_enable(ctrl->hclk); + if (ret) + goto err_hclk_enable_failed; + + ret = clk_prepare_enable(ctrl->rclk); + if (ret) + goto err_rclk_enable_failed; + + ctrl->tx.base = devm_kcalloc(&pdev->dev, ctrl->tx.n, ctrl->tx.sl_sz, + GFP_KERNEL); + if (!ctrl->tx.base) { + ret = -ENOMEM; + goto err; + } + + ctrl->rx.base = devm_kcalloc(&pdev->dev,ctrl->rx.n, ctrl->rx.sl_sz, + GFP_KERNEL); + if (!ctrl->rx.base) { + ret = -ENOMEM; + goto err; + } + + /* Register with framework before enabling frame, clock */ + ret = slim_register_controller(&ctrl->ctrl); + if (ret) { + dev_err(ctrl->dev, "error adding controller\n"); + goto err; + } + + ver = readl_relaxed(ctrl->base); + /* Version info in 16 MSbits */ + ver >>= 16; + /* Component register initialization */ + writel(1, ctrl->base + CFG_PORT(COMP_CFG, ver)); + writel((EE_MGR_RSC_GRP | EE_NGD_2 | EE_NGD_1), + ctrl->base + CFG_PORT(COMP_TRUST_CFG, ver)); + + writel((MGR_INT_TX_NACKED_2 | + MGR_INT_MSG_BUF_CONTE | MGR_INT_RX_MSG_RCVD | + MGR_INT_TX_MSG_SENT), ctrl->base + MGR_INT_EN); + writel(1, ctrl->base + MGR_CFG); + /* Framer register initialization */ + writel((1 << INTR_WAKE) | (0xA << REF_CLK_GEAR) | + (0xA << CLK_GEAR) | (1 << ROOT_FREQ) | (1 << FRM_ACTIVE) | 1, + ctrl->base + FRM_CFG); + writel(MGR_CFG_ENABLE, ctrl->base + MGR_CFG); + writel(1, ctrl->base + INTF_CFG); + writel(1, ctrl->base + CFG_PORT(COMP_CFG, ver)); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, QCOM_SLIM_AUTOSUSPEND); + pm_runtime_set_active(&pdev->dev); + pm_runtime_mark_last_busy(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + dev_dbg(ctrl->dev, "QCOM SB controller is up:ver:0x%x!\n", ver); + return 0; + +err: + clk_disable_unprepare(ctrl->rclk); +err_rclk_enable_failed: + clk_disable_unprepare(ctrl->hclk); +err_hclk_enable_failed: +err_request_irq_failed: + destroy_workqueue(ctrl->rxwq); + return ret; +} + +static int qcom_slim_remove(struct platform_device *pdev) +{ + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + + pm_runtime_disable(&pdev->dev); + slim_unregister_controller(&ctrl->ctrl); + destroy_workqueue(ctrl->rxwq); + return 0; +} + +/* + * If PM_RUNTIME is not defined, these 2 functions become helper + * functions to be called from system suspend/resume. + */ +#ifdef CONFIG_PM +static int qcom_slim_runtime_suspend(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + int ret; + + dev_dbg(device, "pm_runtime: suspending...\n"); + ret = slim_ctrl_clk_pause(&ctrl->ctrl, false, SLIM_CLK_UNSPECIFIED); + if (ret) { + dev_err(device, "clk pause not entered:%d", ret); + } else { + disable_irq(ctrl->irq); + clk_disable_unprepare(ctrl->hclk); + clk_disable_unprepare(ctrl->rclk); + } + return ret; +} + +static int qcom_slim_runtime_resume(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct qcom_slim_ctrl *ctrl = platform_get_drvdata(pdev); + int ret = 0; + + dev_dbg(device, "pm_runtime: resuming...\n"); + ret = slim_ctrl_clk_pause(&ctrl->ctrl, true, 0); + if (ret) + dev_err(device, "clk pause not exited:%d", ret); + return ret; +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int qcom_slim_suspend(struct device *dev) +{ + int ret = 0; + + if (!pm_runtime_enabled(dev) || + (!pm_runtime_suspended(dev))) { + dev_dbg(dev, "system suspend"); + ret = qcom_slim_runtime_suspend(dev); + } + + return ret; +} + +static int qcom_slim_resume(struct device *dev) +{ + if (!pm_runtime_enabled(dev) || !pm_runtime_suspended(dev)) { + int ret; + + dev_dbg(dev, "system resume"); + ret = qcom_slim_runtime_resume(dev); + if (!ret) { + pm_runtime_mark_last_busy(dev); + pm_request_autosuspend(dev); + } + return ret; + + } + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static const struct dev_pm_ops qcom_slim_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(qcom_slim_suspend, qcom_slim_resume) + SET_RUNTIME_PM_OPS( + qcom_slim_runtime_suspend, + qcom_slim_runtime_resume, + NULL + ) +}; + +static const struct of_device_id qcom_slim_dt_match[] = { + { .compatible = "qcom,slim", }, + { .compatible = "qcom,apq8064-slim", }, + {} +}; + +static struct platform_driver qcom_slim_driver = { + .probe = qcom_slim_probe, + .remove = qcom_slim_remove, + .driver = { + .name = "qcom_slim_ctrl", + .of_match_table = qcom_slim_dt_match, + .pm = &qcom_slim_dev_pm_ops, + }, +}; +module_platform_driver(qcom_slim_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Qualcomm SLIMbus Controller"); diff --git a/drivers/slimbus/sched.c b/drivers/slimbus/sched.c new file mode 100644 index 000000000000..af84997d2742 --- /dev/null +++ b/drivers/slimbus/sched.c @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#include +#include "slimbus.h" + +/** + * slim_ctrl_clk_pause() - Called by slimbus controller to enter/exit + * 'clock pause' + * @ctrl: controller requesting bus to be paused or woken up + * @wakeup: Wakeup this controller from clock pause. + * @restart: Restart time value per spec used for clock pause. This value + * isn't used when controller is to be woken up. + * + * Slimbus specification needs this sequence to turn-off clocks for the bus. + * The sequence involves sending 3 broadcast messages (reconfiguration + * sequence) to inform all devices on the bus. + * To exit clock-pause, controller typically wakes up active framer device. + * This API executes clock pause reconfiguration sequence if wakeup is false. + * If wakeup is true, controller's wakeup is called. + * For entering clock-pause, -EBUSY is returned if a message txn in pending. + */ +int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart) +{ + int i, ret = 0; + unsigned long flags; + struct slim_sched *sched = &ctrl->sched; + struct slim_val_inf msg = {0, 0, NULL, NULL}; + + DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION, + 3, SLIM_LA_MANAGER, &msg); + + if (wakeup == false && restart > SLIM_CLK_UNSPECIFIED) + return -EINVAL; + + mutex_lock(&sched->m_reconf); + if (wakeup) { + if (sched->clk_state == SLIM_CLK_ACTIVE) { + mutex_unlock(&sched->m_reconf); + return 0; + } + + /* + * Fine-tune calculation based on clock gear, + * message-bandwidth after bandwidth management + */ + ret = wait_for_completion_timeout(&sched->pause_comp, + msecs_to_jiffies(100)); + if (!ret) { + mutex_unlock(&sched->m_reconf); + pr_err("Previous clock pause did not finish"); + return -ETIMEDOUT; + } + ret = 0; + + /* + * Slimbus framework will call controller wakeup + * Controller should make sure that it sets active framer + * out of clock pause + */ + if (sched->clk_state == SLIM_CLK_PAUSED && ctrl->wakeup) + ret = ctrl->wakeup(ctrl); + if (!ret) + sched->clk_state = SLIM_CLK_ACTIVE; + mutex_unlock(&sched->m_reconf); + + return ret; + } + + /* already paused */ + if (ctrl->sched.clk_state == SLIM_CLK_PAUSED) { + mutex_unlock(&sched->m_reconf); + return 0; + } + + spin_lock_irqsave(&ctrl->txn_lock, flags); + for (i = 0; i < SLIM_MAX_TIDS; i++) { + /* Pending response for a message */ + if (idr_find(&ctrl->tid_idr, i)) { + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + mutex_unlock(&sched->m_reconf); + return -EBUSY; + } + } + spin_unlock_irqrestore(&ctrl->txn_lock, flags); + + sched->clk_state = SLIM_CLK_ENTERING_PAUSE; + + /* clock pause sequence */ + ret = slim_do_transfer(ctrl, &txn); + if (ret) + goto clk_pause_ret; + + txn.mc = SLIM_MSG_MC_NEXT_PAUSE_CLOCK; + txn.rl = 4; + msg.num_bytes = 1; + msg.wbuf = &restart; + ret = slim_do_transfer(ctrl, &txn); + if (ret) + goto clk_pause_ret; + + txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW; + txn.rl = 3; + msg.num_bytes = 1; + msg.wbuf = NULL; + ret = slim_do_transfer(ctrl, &txn); + +clk_pause_ret: + if (ret) { + sched->clk_state = SLIM_CLK_ACTIVE; + } else { + sched->clk_state = SLIM_CLK_PAUSED; + complete(&sched->pause_comp); + } + mutex_unlock(&sched->m_reconf); + + return ret; +} +EXPORT_SYMBOL_GPL(slim_ctrl_clk_pause); diff --git a/drivers/slimbus/slimbus.h b/drivers/slimbus/slimbus.h new file mode 100644 index 000000000000..79f8e05d92dd --- /dev/null +++ b/drivers/slimbus/slimbus.h @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#ifndef _DRIVERS_SLIMBUS_H +#define _DRIVERS_SLIMBUS_H +#include +#include +#include +#include +#include + +/* Standard values per SLIMbus spec needed by controllers and devices */ +#define SLIM_CL_PER_SUPERFRAME 6144 +#define SLIM_CL_PER_SUPERFRAME_DIV8 (SLIM_CL_PER_SUPERFRAME >> 3) + +/* SLIMbus message types. Related to interpretation of message code. */ +#define SLIM_MSG_MT_CORE 0x0 + +/* + * SLIM Broadcast header format + * BYTE 0: MT[7:5] RL[4:0] + * BYTE 1: RSVD[7] MC[6:0] + * BYTE 2: RSVD[7:6] DT[5:4] PI[3:0] + */ +#define SLIM_MSG_MT_MASK GENMASK(2, 0) +#define SLIM_MSG_MT_SHIFT 5 +#define SLIM_MSG_RL_MASK GENMASK(4, 0) +#define SLIM_MSG_RL_SHIFT 0 +#define SLIM_MSG_MC_MASK GENMASK(6, 0) +#define SLIM_MSG_MC_SHIFT 0 +#define SLIM_MSG_DT_MASK GENMASK(1, 0) +#define SLIM_MSG_DT_SHIFT 4 + +#define SLIM_HEADER_GET_MT(b) ((b >> SLIM_MSG_MT_SHIFT) & SLIM_MSG_MT_MASK) +#define SLIM_HEADER_GET_RL(b) ((b >> SLIM_MSG_RL_SHIFT) & SLIM_MSG_RL_MASK) +#define SLIM_HEADER_GET_MC(b) ((b >> SLIM_MSG_MC_SHIFT) & SLIM_MSG_MC_MASK) +#define SLIM_HEADER_GET_DT(b) ((b >> SLIM_MSG_DT_SHIFT) & SLIM_MSG_DT_MASK) + +/* Device management messages used by this framework */ +#define SLIM_MSG_MC_REPORT_PRESENT 0x1 +#define SLIM_MSG_MC_ASSIGN_LOGICAL_ADDRESS 0x2 +#define SLIM_MSG_MC_REPORT_ABSENT 0xF + +/* Clock pause Reconfiguration messages */ +#define SLIM_MSG_MC_BEGIN_RECONFIGURATION 0x40 +#define SLIM_MSG_MC_NEXT_PAUSE_CLOCK 0x4A +#define SLIM_MSG_MC_RECONFIGURE_NOW 0x5F + +/* Clock pause values per SLIMbus spec */ +#define SLIM_CLK_FAST 0 +#define SLIM_CLK_CONST_PHASE 1 +#define SLIM_CLK_UNSPECIFIED 2 + +/* Destination type Values */ +#define SLIM_MSG_DEST_LOGICALADDR 0 +#define SLIM_MSG_DEST_ENUMADDR 1 +#define SLIM_MSG_DEST_BROADCAST 3 + +/* Standard values per SLIMbus spec needed by controllers and devices */ +#define SLIM_MAX_CLK_GEAR 10 +#define SLIM_MIN_CLK_GEAR 1 + +/* Manager's logical address is set to 0xFF per spec */ +#define SLIM_LA_MANAGER 0xFF + +#define SLIM_MAX_TIDS 256 +/** + * struct slim_framer - Represents SLIMbus framer. + * Every controller may have multiple framers. There is 1 active framer device + * responsible for clocking the bus. + * Manager is responsible for framer hand-over. + * @dev: Driver model representation of the device. + * @e_addr: Enumeration address of the framer. + * @rootfreq: Root Frequency at which the framer can run. This is maximum + * frequency ('clock gear 10') at which the bus can operate. + * @superfreq: Superframes per root frequency. Every frame is 6144 bits. + */ +struct slim_framer { + struct device dev; + struct slim_eaddr e_addr; + int rootfreq; + int superfreq; +}; + +#define to_slim_framer(d) container_of(d, struct slim_framer, dev) + +/** + * struct slim_msg_txn - Message to be sent by the controller. + * This structure has packet header, + * payload and buffer to be filled (if any) + * @rl: Header field. remaining length. + * @mt: Header field. Message type. + * @mc: Header field. LSB is message code for type mt. + * @dt: Header field. Destination type. + * @ec: Element code. Used for elemental access APIs. + * @tid: Transaction ID. Used for messages expecting response. + * (relevant for message-codes involving read operation) + * @la: Logical address of the device this message is going to. + * (Not used when destination type is broadcast.) + * @msg: Elemental access message to be read/written + * @comp: completion if read/write is synchronous, used internally + * for tid based transactions. + */ +struct slim_msg_txn { + u8 rl; + u8 mt; + u8 mc; + u8 dt; + u16 ec; + u8 tid; + u8 la; + struct slim_val_inf *msg; + struct completion *comp; +}; + +/* Frequently used message transaction structures */ +#define DEFINE_SLIM_LDEST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_LOGICALADDR, 0,\ + 0, la, msg, } + +#define DEFINE_SLIM_BCAST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_BROADCAST, 0,\ + 0, la, msg, } + +#define DEFINE_SLIM_EDEST_TXN(name, mc, rl, la, msg) \ + struct slim_msg_txn name = { rl, 0, mc, SLIM_MSG_DEST_ENUMADDR, 0,\ + 0, la, msg, } +/** + * enum slim_clk_state: SLIMbus controller's clock state used internally for + * maintaining current clock state. + * @SLIM_CLK_ACTIVE: SLIMbus clock is active + * @SLIM_CLK_ENTERING_PAUSE: SLIMbus clock pause sequence is being sent on the + * bus. If this succeeds, state changes to SLIM_CLK_PAUSED. If the + * transition fails, state changes back to SLIM_CLK_ACTIVE + * @SLIM_CLK_PAUSED: SLIMbus controller clock has paused. + */ +enum slim_clk_state { + SLIM_CLK_ACTIVE, + SLIM_CLK_ENTERING_PAUSE, + SLIM_CLK_PAUSED, +}; + +/** + * struct slim_sched: Framework uses this structure internally for scheduling. + * @clk_state: Controller's clock state from enum slim_clk_state + * @pause_comp: Signals completion of clock pause sequence. This is useful when + * client tries to call SLIMbus transaction when controller is entering + * clock pause. + * @m_reconf: This mutex is held until current reconfiguration (data channel + * scheduling, message bandwidth reservation) is done. Message APIs can + * use the bus concurrently when this mutex is held since elemental access + * messages can be sent on the bus when reconfiguration is in progress. + */ +struct slim_sched { + enum slim_clk_state clk_state; + struct completion pause_comp; + struct mutex m_reconf; +}; + +/** + * struct slim_controller - Controls every instance of SLIMbus + * (similar to 'master' on SPI) + * @dev: Device interface to this driver + * @id: Board-specific number identifier for this controller/bus + * @name: Name for this controller + * @min_cg: Minimum clock gear supported by this controller (default value: 1) + * @max_cg: Maximum clock gear supported by this controller (default value: 10) + * @clkgear: Current clock gear in which this bus is running + * @laddr_ida: logical address id allocator + * @a_framer: Active framer which is clocking the bus managed by this controller + * @lock: Mutex protecting controller data structures + * @devices: Slim device list + * @tid_idr: tid id allocator + * @txn_lock: Lock to protect table of transactions + * @sched: scheduler structure used by the controller + * @xfer_msg: Transfer a message on this controller (this can be a broadcast + * control/status message like data channel setup, or a unicast message + * like value element read/write. + * @set_laddr: Setup logical address at laddr for the slave with elemental + * address e_addr. Drivers implementing controller will be expected to + * send unicast message to this device with its logical address. + * @get_laddr: It is possible that controller needs to set fixed logical + * address table and get_laddr can be used in that case so that controller + * can do this assignment. Use case is when the master is on the remote + * processor side, who is resposible for allocating laddr. + * @wakeup: This function pointer implements controller-specific procedure + * to wake it up from clock-pause. Framework will call this to bring + * the controller out of clock pause. + * + * 'Manager device' is responsible for device management, bandwidth + * allocation, channel setup, and port associations per channel. + * Device management means Logical address assignment/removal based on + * enumeration (report-present, report-absent) of a device. + * Bandwidth allocation is done dynamically by the manager based on active + * channels on the bus, message-bandwidth requests made by SLIMbus devices. + * Based on current bandwidth usage, manager chooses a frequency to run + * the bus at (in steps of 'clock-gear', 1 through 10, each clock gear + * representing twice the frequency than the previous gear). + * Manager is also responsible for entering (and exiting) low-power-mode + * (known as 'clock pause'). + * Manager can do handover of framer if there are multiple framers on the + * bus and a certain usecase warrants using certain framer to avoid keeping + * previous framer being powered-on. + * + * Controller here performs duties of the manager device, and 'interface + * device'. Interface device is responsible for monitoring the bus and + * reporting information such as loss-of-synchronization, data + * slot-collision. + */ +struct slim_controller { + struct device *dev; + unsigned int id; + char name[SLIMBUS_NAME_SIZE]; + int min_cg; + int max_cg; + int clkgear; + struct ida laddr_ida; + struct slim_framer *a_framer; + struct mutex lock; + struct list_head devices; + struct idr tid_idr; + spinlock_t txn_lock; + struct slim_sched sched; + int (*xfer_msg)(struct slim_controller *ctrl, + struct slim_msg_txn *tx); + int (*set_laddr)(struct slim_controller *ctrl, + struct slim_eaddr *ea, u8 laddr); + int (*get_laddr)(struct slim_controller *ctrl, + struct slim_eaddr *ea, u8 *laddr); + int (*wakeup)(struct slim_controller *ctrl); +}; + +int slim_device_report_present(struct slim_controller *ctrl, + struct slim_eaddr *e_addr, u8 *laddr); +void slim_report_absent(struct slim_device *sbdev); +int slim_register_controller(struct slim_controller *ctrl); +int slim_unregister_controller(struct slim_controller *ctrl); +void slim_msg_response(struct slim_controller *ctrl, u8 *reply, u8 tid, u8 l); +int slim_do_transfer(struct slim_controller *ctrl, struct slim_msg_txn *txn); +int slim_ctrl_clk_pause(struct slim_controller *ctrl, bool wakeup, u8 restart); + +static inline bool slim_tid_txn(u8 mt, u8 mc) +{ + return (mt == SLIM_MSG_MT_CORE && + (mc == SLIM_MSG_MC_REQUEST_INFORMATION || + mc == SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION || + mc == SLIM_MSG_MC_REQUEST_VALUE || + mc == SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION)); +} + +static inline bool slim_ec_txn(u8 mt, u8 mc) +{ + return (mt == SLIM_MSG_MT_CORE && + ((mc >= SLIM_MSG_MC_REQUEST_INFORMATION && + mc <= SLIM_MSG_MC_REPORT_INFORMATION) || + (mc >= SLIM_MSG_MC_REQUEST_VALUE && + mc <= SLIM_MSG_MC_CHANGE_VALUE))); +} +#endif /* _LINUX_SLIMBUS_H */ diff --git a/drivers/soundwire/Kconfig b/drivers/soundwire/Kconfig new file mode 100644 index 000000000000..b46084b4b1f8 --- /dev/null +++ b/drivers/soundwire/Kconfig @@ -0,0 +1,37 @@ +# +# SoundWire subsystem configuration +# + +menuconfig SOUNDWIRE + bool "SoundWire support" + ---help--- + SoundWire is a 2-Pin interface with data and clock line ratified + by the MIPI Alliance. SoundWire is used for transporting data + typically related to audio functions. SoundWire interface is + optimized to integrate audio devices in mobile or mobile inspired + systems. Say Y to enable this subsystem, N if you do not have such + a device + +if SOUNDWIRE + +comment "SoundWire Devices" + +config SOUNDWIRE_BUS + tristate + select REGMAP_SOUNDWIRE + +config SOUNDWIRE_CADENCE + tristate + +config SOUNDWIRE_INTEL + tristate "Intel SoundWire Master driver" + select SOUNDWIRE_CADENCE + select SOUNDWIRE_BUS + depends on X86 && ACPI + ---help--- + SoundWire Intel Master driver. + If you have an Intel platform which has a SoundWire Master then + enable this config option to get the SoundWire support for that + device. + +endif diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile new file mode 100644 index 000000000000..e1a74c5692aa --- /dev/null +++ b/drivers/soundwire/Makefile @@ -0,0 +1,18 @@ +# +# Makefile for soundwire core +# + +#Bus Objs +soundwire-bus-objs := bus_type.o bus.o slave.o mipi_disco.o +obj-$(CONFIG_SOUNDWIRE_BUS) += soundwire-bus.o + +#Cadence Objs +soundwire-cadence-objs := cadence_master.o +obj-$(CONFIG_SOUNDWIRE_CADENCE) += soundwire-cadence.o + +#Intel driver +soundwire-intel-objs := intel.o +obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel.o + +soundwire-intel-init-objs := intel_init.o +obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel-init.o diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c new file mode 100644 index 000000000000..d6dc8e7a8614 --- /dev/null +++ b/drivers/soundwire/bus.c @@ -0,0 +1,997 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#include +#include +#include +#include +#include +#include "bus.h" + +/** + * sdw_add_bus_master() - add a bus Master instance + * @bus: bus instance + * + * Initializes the bus instance, read properties and create child + * devices. + */ +int sdw_add_bus_master(struct sdw_bus *bus) +{ + int ret; + + if (!bus->dev) { + pr_err("SoundWire bus has no device"); + return -ENODEV; + } + + if (!bus->ops) { + dev_err(bus->dev, "SoundWire Bus ops are not set"); + return -EINVAL; + } + + mutex_init(&bus->msg_lock); + mutex_init(&bus->bus_lock); + INIT_LIST_HEAD(&bus->slaves); + + if (bus->ops->read_prop) { + ret = bus->ops->read_prop(bus); + if (ret < 0) { + dev_err(bus->dev, "Bus read properties failed:%d", ret); + return ret; + } + } + + /* + * Device numbers in SoundWire are 0 thru 15. Enumeration device + * number (0), Broadcast device number (15), Group numbers (12 and + * 13) and Master device number (14) are not used for assignment so + * mask these and other higher bits. + */ + + /* Set higher order bits */ + *bus->assigned = ~GENMASK(SDW_BROADCAST_DEV_NUM, SDW_ENUM_DEV_NUM); + + /* Set enumuration device number and broadcast device number */ + set_bit(SDW_ENUM_DEV_NUM, bus->assigned); + set_bit(SDW_BROADCAST_DEV_NUM, bus->assigned); + + /* Set group device numbers and master device number */ + set_bit(SDW_GROUP12_DEV_NUM, bus->assigned); + set_bit(SDW_GROUP13_DEV_NUM, bus->assigned); + set_bit(SDW_MASTER_DEV_NUM, bus->assigned); + + /* + * SDW is an enumerable bus, but devices can be powered off. So, + * they won't be able to report as present. + * + * Create Slave devices based on Slaves described in + * the respective firmware (ACPI/DT) + */ + if (IS_ENABLED(CONFIG_ACPI) && ACPI_HANDLE(bus->dev)) + ret = sdw_acpi_find_slaves(bus); + else + ret = -ENOTSUPP; /* No ACPI/DT so error out */ + + if (ret) { + dev_err(bus->dev, "Finding slaves failed:%d\n", ret); + return ret; + } + + return 0; +} +EXPORT_SYMBOL(sdw_add_bus_master); + +static int sdw_delete_slave(struct device *dev, void *data) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_bus *bus = slave->bus; + + mutex_lock(&bus->bus_lock); + + if (slave->dev_num) /* clear dev_num if assigned */ + clear_bit(slave->dev_num, bus->assigned); + + list_del_init(&slave->node); + mutex_unlock(&bus->bus_lock); + + device_unregister(dev); + return 0; +} + +/** + * sdw_delete_bus_master() - delete the bus master instance + * @bus: bus to be deleted + * + * Remove the instance, delete the child devices. + */ +void sdw_delete_bus_master(struct sdw_bus *bus) +{ + device_for_each_child(bus->dev, NULL, sdw_delete_slave); +} +EXPORT_SYMBOL(sdw_delete_bus_master); + +/* + * SDW IO Calls + */ + +static inline int find_response_code(enum sdw_command_response resp) +{ + switch (resp) { + case SDW_CMD_OK: + return 0; + + case SDW_CMD_IGNORED: + return -ENODATA; + + case SDW_CMD_TIMEOUT: + return -ETIMEDOUT; + + default: + return -EIO; + } +} + +static inline int do_transfer(struct sdw_bus *bus, struct sdw_msg *msg) +{ + int retry = bus->prop.err_threshold; + enum sdw_command_response resp; + int ret = 0, i; + + for (i = 0; i <= retry; i++) { + resp = bus->ops->xfer_msg(bus, msg); + ret = find_response_code(resp); + + /* if cmd is ok or ignored return */ + if (ret == 0 || ret == -ENODATA) + return ret; + } + + return ret; +} + +static inline int do_transfer_defer(struct sdw_bus *bus, + struct sdw_msg *msg, struct sdw_defer *defer) +{ + int retry = bus->prop.err_threshold; + enum sdw_command_response resp; + int ret = 0, i; + + defer->msg = msg; + defer->length = msg->len; + + for (i = 0; i <= retry; i++) { + resp = bus->ops->xfer_msg_defer(bus, msg, defer); + ret = find_response_code(resp); + /* if cmd is ok or ignored return */ + if (ret == 0 || ret == -ENODATA) + return ret; + } + + return ret; +} + +static int sdw_reset_page(struct sdw_bus *bus, u16 dev_num) +{ + int retry = bus->prop.err_threshold; + enum sdw_command_response resp; + int ret = 0, i; + + for (i = 0; i <= retry; i++) { + resp = bus->ops->reset_page_addr(bus, dev_num); + ret = find_response_code(resp); + /* if cmd is ok or ignored return */ + if (ret == 0 || ret == -ENODATA) + return ret; + } + + return ret; +} + +/** + * sdw_transfer() - Synchronous transfer message to a SDW Slave device + * @bus: SDW bus + * @msg: SDW message to be xfered + */ +int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg) +{ + int ret; + + mutex_lock(&bus->msg_lock); + + ret = do_transfer(bus, msg); + if (ret != 0 && ret != -ENODATA) + dev_err(bus->dev, "trf on Slave %d failed:%d\n", + msg->dev_num, ret); + + if (msg->page) + sdw_reset_page(bus, msg->dev_num); + + mutex_unlock(&bus->msg_lock); + + return ret; +} + +/** + * sdw_transfer_defer() - Asynchronously transfer message to a SDW Slave device + * @bus: SDW bus + * @msg: SDW message to be xfered + * @defer: Defer block for signal completion + * + * Caller needs to hold the msg_lock lock while calling this + */ +int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, + struct sdw_defer *defer) +{ + int ret; + + if (!bus->ops->xfer_msg_defer) + return -ENOTSUPP; + + ret = do_transfer_defer(bus, msg, defer); + if (ret != 0 && ret != -ENODATA) + dev_err(bus->dev, "Defer trf on Slave %d failed:%d\n", + msg->dev_num, ret); + + if (msg->page) + sdw_reset_page(bus, msg->dev_num); + + return ret; +} + + +int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, + u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf) +{ + memset(msg, 0, sizeof(*msg)); + msg->addr = addr; /* addr is 16 bit and truncated here */ + msg->len = count; + msg->dev_num = dev_num; + msg->flags = flags; + msg->buf = buf; + msg->ssp_sync = false; + msg->page = false; + + if (addr < SDW_REG_NO_PAGE) { /* no paging area */ + return 0; + } else if (addr >= SDW_REG_MAX) { /* illegal addr */ + pr_err("SDW: Invalid address %x passed\n", addr); + return -EINVAL; + } + + if (addr < SDW_REG_OPTIONAL_PAGE) { /* 32k but no page */ + if (slave && !slave->prop.paging_support) + return 0; + /* no need for else as that will fall thru to paging */ + } + + /* paging mandatory */ + if (dev_num == SDW_ENUM_DEV_NUM || dev_num == SDW_BROADCAST_DEV_NUM) { + pr_err("SDW: Invalid device for paging :%d\n", dev_num); + return -EINVAL; + } + + if (!slave) { + pr_err("SDW: No slave for paging addr\n"); + return -EINVAL; + } else if (!slave->prop.paging_support) { + dev_err(&slave->dev, + "address %x needs paging but no support", addr); + return -EINVAL; + } + + msg->addr_page1 = (addr >> SDW_REG_SHIFT(SDW_SCP_ADDRPAGE1_MASK)); + msg->addr_page2 = (addr >> SDW_REG_SHIFT(SDW_SCP_ADDRPAGE2_MASK)); + msg->addr |= BIT(15); + msg->page = true; + + return 0; +} + +/** + * sdw_nread() - Read "n" contiguous SDW Slave registers + * @slave: SDW Slave + * @addr: Register address + * @count: length + * @val: Buffer for values to be read + */ +int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) +{ + struct sdw_msg msg; + int ret; + + ret = sdw_fill_msg(&msg, slave, addr, count, + slave->dev_num, SDW_MSG_FLAG_READ, val); + if (ret < 0) + return ret; + + ret = pm_runtime_get_sync(slave->bus->dev); + if (ret < 0) + return ret; + + ret = sdw_transfer(slave->bus, &msg); + pm_runtime_put(slave->bus->dev); + + return ret; +} +EXPORT_SYMBOL(sdw_nread); + +/** + * sdw_nwrite() - Write "n" contiguous SDW Slave registers + * @slave: SDW Slave + * @addr: Register address + * @count: length + * @val: Buffer for values to be read + */ +int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val) +{ + struct sdw_msg msg; + int ret; + + ret = sdw_fill_msg(&msg, slave, addr, count, + slave->dev_num, SDW_MSG_FLAG_WRITE, val); + if (ret < 0) + return ret; + + ret = pm_runtime_get_sync(slave->bus->dev); + if (ret < 0) + return ret; + + ret = sdw_transfer(slave->bus, &msg); + pm_runtime_put(slave->bus->dev); + + return ret; +} +EXPORT_SYMBOL(sdw_nwrite); + +/** + * sdw_read() - Read a SDW Slave register + * @slave: SDW Slave + * @addr: Register address + */ +int sdw_read(struct sdw_slave *slave, u32 addr) +{ + u8 buf; + int ret; + + ret = sdw_nread(slave, addr, 1, &buf); + if (ret < 0) + return ret; + else + return buf; +} +EXPORT_SYMBOL(sdw_read); + +/** + * sdw_write() - Write a SDW Slave register + * @slave: SDW Slave + * @addr: Register address + * @value: Register value + */ +int sdw_write(struct sdw_slave *slave, u32 addr, u8 value) +{ + return sdw_nwrite(slave, addr, 1, &value); + +} +EXPORT_SYMBOL(sdw_write); + +/* + * SDW alert handling + */ + +/* called with bus_lock held */ +static struct sdw_slave *sdw_get_slave(struct sdw_bus *bus, int i) +{ + struct sdw_slave *slave = NULL; + + list_for_each_entry(slave, &bus->slaves, node) { + if (slave->dev_num == i) + return slave; + } + + return NULL; +} + +static int sdw_compare_devid(struct sdw_slave *slave, struct sdw_slave_id id) +{ + + if ((slave->id.unique_id != id.unique_id) || + (slave->id.mfg_id != id.mfg_id) || + (slave->id.part_id != id.part_id) || + (slave->id.class_id != id.class_id)) + return -ENODEV; + + return 0; +} + +/* called with bus_lock held */ +static int sdw_get_device_num(struct sdw_slave *slave) +{ + int bit; + + bit = find_first_zero_bit(slave->bus->assigned, SDW_MAX_DEVICES); + if (bit == SDW_MAX_DEVICES) { + bit = -ENODEV; + goto err; + } + + /* + * Do not update dev_num in Slave data structure here, + * Update once program dev_num is successful + */ + set_bit(bit, slave->bus->assigned); + +err: + return bit; +} + +static int sdw_assign_device_num(struct sdw_slave *slave) +{ + int ret, dev_num; + + /* check first if device number is assigned, if so reuse that */ + if (!slave->dev_num) { + mutex_lock(&slave->bus->bus_lock); + dev_num = sdw_get_device_num(slave); + mutex_unlock(&slave->bus->bus_lock); + if (dev_num < 0) { + dev_err(slave->bus->dev, "Get dev_num failed: %d", + dev_num); + return dev_num; + } + } else { + dev_info(slave->bus->dev, + "Slave already registered dev_num:%d", + slave->dev_num); + + /* Clear the slave->dev_num to transfer message on device 0 */ + dev_num = slave->dev_num; + slave->dev_num = 0; + + } + + ret = sdw_write(slave, SDW_SCP_DEVNUMBER, dev_num); + if (ret < 0) { + dev_err(&slave->dev, "Program device_num failed: %d", ret); + return ret; + } + + /* After xfer of msg, restore dev_num */ + slave->dev_num = dev_num; + + return 0; +} + +void sdw_extract_slave_id(struct sdw_bus *bus, + u64 addr, struct sdw_slave_id *id) +{ + dev_dbg(bus->dev, "SDW Slave Addr: %llx", addr); + + /* + * Spec definition + * Register Bit Contents + * DevId_0 [7:4] 47:44 sdw_version + * DevId_0 [3:0] 43:40 unique_id + * DevId_1 39:32 mfg_id [15:8] + * DevId_2 31:24 mfg_id [7:0] + * DevId_3 23:16 part_id [15:8] + * DevId_4 15:08 part_id [7:0] + * DevId_5 07:00 class_id + */ + id->sdw_version = (addr >> 44) & GENMASK(3, 0); + id->unique_id = (addr >> 40) & GENMASK(3, 0); + id->mfg_id = (addr >> 24) & GENMASK(15, 0); + id->part_id = (addr >> 8) & GENMASK(15, 0); + id->class_id = addr & GENMASK(7, 0); + + dev_dbg(bus->dev, + "SDW Slave class_id %x, part_id %x, mfg_id %x, unique_id %x, version %x", + id->class_id, id->part_id, id->mfg_id, + id->unique_id, id->sdw_version); + +} + +static int sdw_program_device_num(struct sdw_bus *bus) +{ + u8 buf[SDW_NUM_DEV_ID_REGISTERS] = {0}; + struct sdw_slave *slave, *_s; + struct sdw_slave_id id; + struct sdw_msg msg; + bool found = false; + int count = 0, ret; + u64 addr; + + /* No Slave, so use raw xfer api */ + ret = sdw_fill_msg(&msg, NULL, SDW_SCP_DEVID_0, + SDW_NUM_DEV_ID_REGISTERS, 0, SDW_MSG_FLAG_READ, buf); + if (ret < 0) + return ret; + + do { + ret = sdw_transfer(bus, &msg); + if (ret == -ENODATA) { /* end of device id reads */ + ret = 0; + break; + } + if (ret < 0) { + dev_err(bus->dev, "DEVID read fail:%d\n", ret); + break; + } + + /* + * Construct the addr and extract. Cast the higher shift + * bits to avoid truncation due to size limit. + */ + addr = buf[5] | (buf[4] << 8) | (buf[3] << 16) | + ((u64)buf[2] << 24) | ((u64)buf[1] << 32) | + ((u64)buf[0] << 40); + + sdw_extract_slave_id(bus, addr, &id); + + /* Now compare with entries */ + list_for_each_entry_safe(slave, _s, &bus->slaves, node) { + if (sdw_compare_devid(slave, id) == 0) { + found = true; + + /* + * Assign a new dev_num to this Slave and + * not mark it present. It will be marked + * present after it reports ATTACHED on new + * dev_num + */ + ret = sdw_assign_device_num(slave); + if (ret) { + dev_err(slave->bus->dev, + "Assign dev_num failed:%d", + ret); + return ret; + } + + break; + } + } + + if (found == false) { + /* TODO: Park this device in Group 13 */ + dev_err(bus->dev, "Slave Entry not found"); + } + + count++; + + /* + * Check till error out or retry (count) exhausts. + * Device can drop off and rejoin during enumeration + * so count till twice the bound. + */ + + } while (ret == 0 && count < (SDW_MAX_DEVICES * 2)); + + return ret; +} + +static void sdw_modify_slave_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + mutex_lock(&slave->bus->bus_lock); + slave->status = status; + mutex_unlock(&slave->bus->bus_lock); +} + +static int sdw_initialize_slave(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + int ret; + u8 val; + + /* + * Set bus clash, parity and SCP implementation + * defined interrupt mask + * TODO: Read implementation defined interrupt mask + * from Slave property + */ + val = SDW_SCP_INT1_IMPL_DEF | SDW_SCP_INT1_BUS_CLASH | + SDW_SCP_INT1_PARITY; + + /* Enable SCP interrupts */ + ret = sdw_update(slave, SDW_SCP_INTMASK1, val, val); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INTMASK1 write failed:%d", ret); + return ret; + } + + /* No need to continue if DP0 is not present */ + if (!slave->prop.dp0_prop) + return 0; + + /* Enable DP0 interrupts */ + val = prop->dp0_prop->device_interrupts; + val |= SDW_DP0_INT_PORT_READY | SDW_DP0_INT_BRA_FAILURE; + + ret = sdw_update(slave, SDW_DP0_INTMASK, val, val); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_DP0_INTMASK read failed:%d", ret); + return val; + } + + return 0; +} + +static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status) +{ + u8 clear = 0, impl_int_mask; + int status, status2, ret, count = 0; + + status = sdw_read(slave, SDW_DP0_INT); + if (status < 0) { + dev_err(slave->bus->dev, + "SDW_DP0_INT read failed:%d", status); + return status; + } + + do { + + if (status & SDW_DP0_INT_TEST_FAIL) { + dev_err(&slave->dev, "Test fail for port 0"); + clear |= SDW_DP0_INT_TEST_FAIL; + } + + /* + * Assumption: PORT_READY interrupt will be received only for + * ports implementing Channel Prepare state machine (CP_SM) + */ + + if (status & SDW_DP0_INT_PORT_READY) { + complete(&slave->port_ready[0]); + clear |= SDW_DP0_INT_PORT_READY; + } + + if (status & SDW_DP0_INT_BRA_FAILURE) { + dev_err(&slave->dev, "BRA failed"); + clear |= SDW_DP0_INT_BRA_FAILURE; + } + + impl_int_mask = SDW_DP0_INT_IMPDEF1 | + SDW_DP0_INT_IMPDEF2 | SDW_DP0_INT_IMPDEF3; + + if (status & impl_int_mask) { + clear |= impl_int_mask; + *slave_status = clear; + } + + /* clear the interrupt */ + ret = sdw_write(slave, SDW_DP0_INT, clear); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_DP0_INT write failed:%d", ret); + return ret; + } + + /* Read DP0 interrupt again */ + status2 = sdw_read(slave, SDW_DP0_INT); + if (status2 < 0) { + dev_err(slave->bus->dev, + "SDW_DP0_INT read failed:%d", status2); + return status2; + } + status &= status2; + + count++; + + /* we can get alerts while processing so keep retrying */ + } while (status != 0 && count < SDW_READ_INTR_CLEAR_RETRY); + + if (count == SDW_READ_INTR_CLEAR_RETRY) + dev_warn(slave->bus->dev, "Reached MAX_RETRY on DP0 read"); + + return ret; +} + +static int sdw_handle_port_interrupt(struct sdw_slave *slave, + int port, u8 *slave_status) +{ + u8 clear = 0, impl_int_mask; + int status, status2, ret, count = 0; + u32 addr; + + if (port == 0) + return sdw_handle_dp0_interrupt(slave, slave_status); + + addr = SDW_DPN_INT(port); + status = sdw_read(slave, addr); + if (status < 0) { + dev_err(slave->bus->dev, + "SDW_DPN_INT read failed:%d", status); + + return status; + } + + do { + + if (status & SDW_DPN_INT_TEST_FAIL) { + dev_err(&slave->dev, "Test fail for port:%d", port); + clear |= SDW_DPN_INT_TEST_FAIL; + } + + /* + * Assumption: PORT_READY interrupt will be received only + * for ports implementing CP_SM. + */ + if (status & SDW_DPN_INT_PORT_READY) { + complete(&slave->port_ready[port]); + clear |= SDW_DPN_INT_PORT_READY; + } + + impl_int_mask = SDW_DPN_INT_IMPDEF1 | + SDW_DPN_INT_IMPDEF2 | SDW_DPN_INT_IMPDEF3; + + + if (status & impl_int_mask) { + clear |= impl_int_mask; + *slave_status = clear; + } + + /* clear the interrupt */ + ret = sdw_write(slave, addr, clear); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_DPN_INT write failed:%d", ret); + return ret; + } + + /* Read DPN interrupt again */ + status2 = sdw_read(slave, addr); + if (status2 < 0) { + dev_err(slave->bus->dev, + "SDW_DPN_INT read failed:%d", status2); + return status2; + } + status &= status2; + + count++; + + /* we can get alerts while processing so keep retrying */ + } while (status != 0 && count < SDW_READ_INTR_CLEAR_RETRY); + + if (count == SDW_READ_INTR_CLEAR_RETRY) + dev_warn(slave->bus->dev, "Reached MAX_RETRY on port read"); + + return ret; +} + +static int sdw_handle_slave_alerts(struct sdw_slave *slave) +{ + struct sdw_slave_intr_status slave_intr; + u8 clear = 0, bit, port_status[15]; + int port_num, stat, ret, count = 0; + unsigned long port; + bool slave_notify = false; + u8 buf, buf2[2], _buf, _buf2[2]; + + sdw_modify_slave_status(slave, SDW_SLAVE_ALERT); + + /* Read Instat 1, Instat 2 and Instat 3 registers */ + buf = ret = sdw_read(slave, SDW_SCP_INT1); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT1 read failed:%d", ret); + return ret; + } + + ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, buf2); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT2/3 read failed:%d", ret); + return ret; + } + + do { + /* + * Check parity, bus clash and Slave (impl defined) + * interrupt + */ + if (buf & SDW_SCP_INT1_PARITY) { + dev_err(&slave->dev, "Parity error detected"); + clear |= SDW_SCP_INT1_PARITY; + } + + if (buf & SDW_SCP_INT1_BUS_CLASH) { + dev_err(&slave->dev, "Bus clash error detected"); + clear |= SDW_SCP_INT1_BUS_CLASH; + } + + /* + * When bus clash or parity errors are detected, such errors + * are unlikely to be recoverable errors. + * TODO: In such scenario, reset bus. Make this configurable + * via sysfs property with bus reset being the default. + */ + + if (buf & SDW_SCP_INT1_IMPL_DEF) { + dev_dbg(&slave->dev, "Slave impl defined interrupt\n"); + clear |= SDW_SCP_INT1_IMPL_DEF; + slave_notify = true; + } + + /* Check port 0 - 3 interrupts */ + port = buf & SDW_SCP_INT1_PORT0_3; + + /* To get port number corresponding to bits, shift it */ + port = port >> SDW_REG_SHIFT(SDW_SCP_INT1_PORT0_3); + for_each_set_bit(bit, &port, 8) { + sdw_handle_port_interrupt(slave, bit, + &port_status[bit]); + + } + + /* Check if cascade 2 interrupt is present */ + if (buf & SDW_SCP_INT1_SCP2_CASCADE) { + port = buf2[0] & SDW_SCP_INTSTAT2_PORT4_10; + for_each_set_bit(bit, &port, 8) { + /* scp2 ports start from 4 */ + port_num = bit + 3; + sdw_handle_port_interrupt(slave, + port_num, + &port_status[port_num]); + } + } + + /* now check last cascade */ + if (buf2[0] & SDW_SCP_INTSTAT2_SCP3_CASCADE) { + port = buf2[1] & SDW_SCP_INTSTAT3_PORT11_14; + for_each_set_bit(bit, &port, 8) { + /* scp3 ports start from 11 */ + port_num = bit + 10; + sdw_handle_port_interrupt(slave, + port_num, + &port_status[port_num]); + } + } + + /* Update the Slave driver */ + if (slave_notify && (slave->ops) && + (slave->ops->interrupt_callback)) { + slave_intr.control_port = clear; + memcpy(slave_intr.port, &port_status, + sizeof(slave_intr.port)); + + slave->ops->interrupt_callback(slave, &slave_intr); + } + + /* Ack interrupt */ + ret = sdw_write(slave, SDW_SCP_INT1, clear); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT1 write failed:%d", ret); + return ret; + } + + /* + * Read status again to ensure no new interrupts arrived + * while servicing interrupts. + */ + _buf = ret = sdw_read(slave, SDW_SCP_INT1); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT1 read failed:%d", ret); + return ret; + } + + ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, _buf2); + if (ret < 0) { + dev_err(slave->bus->dev, + "SDW_SCP_INT2/3 read failed:%d", ret); + return ret; + } + + /* Make sure no interrupts are pending */ + buf &= _buf; + buf2[0] &= _buf2[0]; + buf2[1] &= _buf2[1]; + stat = buf || buf2[0] || buf2[1]; + + /* + * Exit loop if Slave is continuously in ALERT state even + * after servicing the interrupt multiple times. + */ + count++; + + /* we can get alerts while processing so keep retrying */ + } while (stat != 0 && count < SDW_READ_INTR_CLEAR_RETRY); + + if (count == SDW_READ_INTR_CLEAR_RETRY) + dev_warn(slave->bus->dev, "Reached MAX_RETRY on alert read"); + + return ret; +} + +static int sdw_update_slave_status(struct sdw_slave *slave, + enum sdw_slave_status status) +{ + if ((slave->ops) && (slave->ops->update_status)) + return slave->ops->update_status(slave, status); + + return 0; +} + +/** + * sdw_handle_slave_status() - Handle Slave status + * @bus: SDW bus instance + * @status: Status for all Slave(s) + */ +int sdw_handle_slave_status(struct sdw_bus *bus, + enum sdw_slave_status status[]) +{ + enum sdw_slave_status prev_status; + struct sdw_slave *slave; + int i, ret = 0; + + if (status[0] == SDW_SLAVE_ATTACHED) { + ret = sdw_program_device_num(bus); + if (ret) + dev_err(bus->dev, "Slave attach failed: %d", ret); + } + + /* Continue to check other slave statuses */ + for (i = 1; i <= SDW_MAX_DEVICES; i++) { + mutex_lock(&bus->bus_lock); + if (test_bit(i, bus->assigned) == false) { + mutex_unlock(&bus->bus_lock); + continue; + } + mutex_unlock(&bus->bus_lock); + + slave = sdw_get_slave(bus, i); + if (!slave) + continue; + + switch (status[i]) { + case SDW_SLAVE_UNATTACHED: + if (slave->status == SDW_SLAVE_UNATTACHED) + break; + + sdw_modify_slave_status(slave, SDW_SLAVE_UNATTACHED); + break; + + case SDW_SLAVE_ALERT: + ret = sdw_handle_slave_alerts(slave); + if (ret) + dev_err(bus->dev, + "Slave %d alert handling failed: %d", + i, ret); + break; + + case SDW_SLAVE_ATTACHED: + if (slave->status == SDW_SLAVE_ATTACHED) + break; + + prev_status = slave->status; + sdw_modify_slave_status(slave, SDW_SLAVE_ATTACHED); + + if (prev_status == SDW_SLAVE_ALERT) + break; + + ret = sdw_initialize_slave(slave); + if (ret) + dev_err(bus->dev, + "Slave %d initialization failed: %d", + i, ret); + + break; + + default: + dev_err(bus->dev, "Invalid slave %d status:%d", + i, status[i]); + break; + } + + ret = sdw_update_slave_status(slave, status[i]); + if (ret) + dev_err(slave->bus->dev, + "Update Slave status failed:%d", ret); + + } + + return ret; +} +EXPORT_SYMBOL(sdw_handle_slave_status); diff --git a/drivers/soundwire/bus.h b/drivers/soundwire/bus.h new file mode 100644 index 000000000000..345c34d697e9 --- /dev/null +++ b/drivers/soundwire/bus.h @@ -0,0 +1,71 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_BUS_H +#define __SDW_BUS_H + +#if IS_ENABLED(CONFIG_ACPI) +int sdw_acpi_find_slaves(struct sdw_bus *bus); +#else +static inline int sdw_acpi_find_slaves(struct sdw_bus *bus) +{ + return -ENOTSUPP; +} +#endif + +void sdw_extract_slave_id(struct sdw_bus *bus, + u64 addr, struct sdw_slave_id *id); + +enum { + SDW_MSG_FLAG_READ = 0, + SDW_MSG_FLAG_WRITE, +}; + +/** + * struct sdw_msg - Message structure + * @addr: Register address accessed in the Slave + * @len: number of messages + * @dev_num: Slave device number + * @addr_page1: SCP address page 1 Slave register + * @addr_page2: SCP address page 2 Slave register + * @flags: transfer flags, indicate if xfer is read or write + * @buf: message data buffer + * @ssp_sync: Send message at SSP (Stream Synchronization Point) + * @page: address requires paging + */ +struct sdw_msg { + u16 addr; + u16 len; + u8 dev_num; + u8 addr_page1; + u8 addr_page2; + u8 flags; + u8 *buf; + bool ssp_sync; + bool page; +}; + +int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg); +int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg, + struct sdw_defer *defer); + +#define SDW_READ_INTR_CLEAR_RETRY 10 + +int sdw_fill_msg(struct sdw_msg *msg, struct sdw_slave *slave, + u32 addr, size_t count, u16 dev_num, u8 flags, u8 *buf); + +/* Read-Modify-Write Slave register */ +static inline int +sdw_update(struct sdw_slave *slave, u32 addr, u8 mask, u8 val) +{ + int tmp; + + tmp = sdw_read(slave, addr); + if (tmp < 0) + return tmp; + + tmp = (tmp & ~mask) | val; + return sdw_write(slave, addr, tmp); +} + +#endif /* __SDW_BUS_H */ diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c new file mode 100644 index 000000000000..d5f3a70c06b0 --- /dev/null +++ b/drivers/soundwire/bus_type.c @@ -0,0 +1,193 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2015-17 Intel Corporation. + +#include +#include +#include +#include +#include + +/** + * sdw_get_device_id - find the matching SoundWire device id + * @slave: SoundWire Slave Device + * @drv: SoundWire Slave Driver + * + * The match is done by comparing the mfg_id and part_id from the + * struct sdw_device_id. + */ +static const struct sdw_device_id * +sdw_get_device_id(struct sdw_slave *slave, struct sdw_driver *drv) +{ + const struct sdw_device_id *id = drv->id_table; + + while (id && id->mfg_id) { + if (slave->id.mfg_id == id->mfg_id && + slave->id.part_id == id->part_id) + return id; + id++; + } + + return NULL; +} + +static int sdw_bus_match(struct device *dev, struct device_driver *ddrv) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_driver *drv = drv_to_sdw_driver(ddrv); + + return !!sdw_get_device_id(slave, drv); +} + +int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size) +{ + /* modalias is sdw:mp */ + + return snprintf(buf, size, "sdw:m%04Xp%04X\n", + slave->id.mfg_id, slave->id.part_id); +} + +static int sdw_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + char modalias[32]; + + sdw_slave_modalias(slave, modalias, sizeof(modalias)); + + if (add_uevent_var(env, "MODALIAS=%s", modalias)) + return -ENOMEM; + + return 0; +} + +struct bus_type sdw_bus_type = { + .name = "soundwire", + .match = sdw_bus_match, + .uevent = sdw_uevent, +}; +EXPORT_SYMBOL_GPL(sdw_bus_type); + +static int sdw_drv_probe(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_driver *drv = drv_to_sdw_driver(dev->driver); + const struct sdw_device_id *id; + int ret; + + id = sdw_get_device_id(slave, drv); + if (!id) + return -ENODEV; + + slave->ops = drv->ops; + + /* + * attach to power domain but don't turn on (last arg) + */ + ret = dev_pm_domain_attach(dev, false); + if (ret != -EPROBE_DEFER) { + ret = drv->probe(slave, id); + if (ret) { + dev_err(dev, "Probe of %s failed: %d\n", drv->name, ret); + dev_pm_domain_detach(dev, false); + } + } + + if (ret) + return ret; + + /* device is probed so let's read the properties now */ + if (slave->ops && slave->ops->read_prop) + slave->ops->read_prop(slave); + + /* + * Check for valid clk_stop_timeout, use DisCo worst case value of + * 300ms + * + * TODO: check the timeouts and driver removal case + */ + if (slave->prop.clk_stop_timeout == 0) + slave->prop.clk_stop_timeout = 300; + + slave->bus->clk_stop_timeout = max_t(u32, slave->bus->clk_stop_timeout, + slave->prop.clk_stop_timeout); + + return 0; +} + +static int sdw_drv_remove(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_driver *drv = drv_to_sdw_driver(dev->driver); + int ret = 0; + + if (drv->remove) + ret = drv->remove(slave); + + dev_pm_domain_detach(dev, false); + + return ret; +} + +static void sdw_drv_shutdown(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + struct sdw_driver *drv = drv_to_sdw_driver(dev->driver); + + if (drv->shutdown) + drv->shutdown(slave); +} + +/** + * __sdw_register_driver() - register a SoundWire Slave driver + * @drv: driver to register + * @owner: owning module/driver + * + * Return: zero on success, else a negative error code. + */ +int __sdw_register_driver(struct sdw_driver *drv, struct module *owner) +{ + drv->driver.bus = &sdw_bus_type; + + if (!drv->probe) { + pr_err("driver %s didn't provide SDW probe routine\n", + drv->name); + return -EINVAL; + } + + drv->driver.owner = owner; + drv->driver.probe = sdw_drv_probe; + + if (drv->remove) + drv->driver.remove = sdw_drv_remove; + + if (drv->shutdown) + drv->driver.shutdown = sdw_drv_shutdown; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(__sdw_register_driver); + +/** + * sdw_unregister_driver() - unregisters the SoundWire Slave driver + * @drv: driver to unregister + */ +void sdw_unregister_driver(struct sdw_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(sdw_unregister_driver); + +static int __init sdw_bus_init(void) +{ + return bus_register(&sdw_bus_type); +} + +static void __exit sdw_bus_exit(void) +{ + bus_unregister(&sdw_bus_type); +} + +postcore_initcall(sdw_bus_init); +module_exit(sdw_bus_exit); + +MODULE_DESCRIPTION("SoundWire bus"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c new file mode 100644 index 000000000000..3a9b1462039b --- /dev/null +++ b/drivers/soundwire/cadence_master.c @@ -0,0 +1,751 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +/* + * Cadence SoundWire Master module + * Used by Master driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include "bus.h" +#include "cadence_master.h" + +#define CDNS_MCP_CONFIG 0x0 + +#define CDNS_MCP_CONFIG_MCMD_RETRY GENMASK(27, 24) +#define CDNS_MCP_CONFIG_MPREQ_DELAY GENMASK(20, 16) +#define CDNS_MCP_CONFIG_MMASTER BIT(7) +#define CDNS_MCP_CONFIG_BUS_REL BIT(6) +#define CDNS_MCP_CONFIG_SNIFFER BIT(5) +#define CDNS_MCP_CONFIG_SSPMOD BIT(4) +#define CDNS_MCP_CONFIG_CMD BIT(3) +#define CDNS_MCP_CONFIG_OP GENMASK(2, 0) +#define CDNS_MCP_CONFIG_OP_NORMAL 0 + +#define CDNS_MCP_CONTROL 0x4 + +#define CDNS_MCP_CONTROL_RST_DELAY GENMASK(10, 8) +#define CDNS_MCP_CONTROL_CMD_RST BIT(7) +#define CDNS_MCP_CONTROL_SOFT_RST BIT(6) +#define CDNS_MCP_CONTROL_SW_RST BIT(5) +#define CDNS_MCP_CONTROL_HW_RST BIT(4) +#define CDNS_MCP_CONTROL_CLK_PAUSE BIT(3) +#define CDNS_MCP_CONTROL_CLK_STOP_CLR BIT(2) +#define CDNS_MCP_CONTROL_CMD_ACCEPT BIT(1) +#define CDNS_MCP_CONTROL_BLOCK_WAKEUP BIT(0) + + +#define CDNS_MCP_CMDCTRL 0x8 +#define CDNS_MCP_SSPSTAT 0xC +#define CDNS_MCP_FRAME_SHAPE 0x10 +#define CDNS_MCP_FRAME_SHAPE_INIT 0x14 + +#define CDNS_MCP_CONFIG_UPDATE 0x18 +#define CDNS_MCP_CONFIG_UPDATE_BIT BIT(0) + +#define CDNS_MCP_PHYCTRL 0x1C +#define CDNS_MCP_SSP_CTRL0 0x20 +#define CDNS_MCP_SSP_CTRL1 0x28 +#define CDNS_MCP_CLK_CTRL0 0x30 +#define CDNS_MCP_CLK_CTRL1 0x38 + +#define CDNS_MCP_STAT 0x40 + +#define CDNS_MCP_STAT_ACTIVE_BANK BIT(20) +#define CDNS_MCP_STAT_CLK_STOP BIT(16) + +#define CDNS_MCP_INTSTAT 0x44 +#define CDNS_MCP_INTMASK 0x48 + +#define CDNS_MCP_INT_IRQ BIT(31) +#define CDNS_MCP_INT_WAKEUP BIT(16) +#define CDNS_MCP_INT_SLAVE_RSVD BIT(15) +#define CDNS_MCP_INT_SLAVE_ALERT BIT(14) +#define CDNS_MCP_INT_SLAVE_ATTACH BIT(13) +#define CDNS_MCP_INT_SLAVE_NATTACH BIT(12) +#define CDNS_MCP_INT_SLAVE_MASK GENMASK(15, 12) +#define CDNS_MCP_INT_DPINT BIT(11) +#define CDNS_MCP_INT_CTRL_CLASH BIT(10) +#define CDNS_MCP_INT_DATA_CLASH BIT(9) +#define CDNS_MCP_INT_CMD_ERR BIT(7) +#define CDNS_MCP_INT_RX_WL BIT(2) +#define CDNS_MCP_INT_TXE BIT(1) + +#define CDNS_MCP_INTSET 0x4C + +#define CDNS_SDW_SLAVE_STAT 0x50 +#define CDNS_MCP_SLAVE_STAT_MASK BIT(1, 0) + +#define CDNS_MCP_SLAVE_INTSTAT0 0x54 +#define CDNS_MCP_SLAVE_INTSTAT1 0x58 +#define CDNS_MCP_SLAVE_INTSTAT_NPRESENT BIT(0) +#define CDNS_MCP_SLAVE_INTSTAT_ATTACHED BIT(1) +#define CDNS_MCP_SLAVE_INTSTAT_ALERT BIT(2) +#define CDNS_MCP_SLAVE_INTSTAT_RESERVED BIT(3) +#define CDNS_MCP_SLAVE_STATUS_BITS GENMASK(3, 0) +#define CDNS_MCP_SLAVE_STATUS_NUM 4 + +#define CDNS_MCP_SLAVE_INTMASK0 0x5C +#define CDNS_MCP_SLAVE_INTMASK1 0x60 + +#define CDNS_MCP_SLAVE_INTMASK0_MASK GENMASK(30, 0) +#define CDNS_MCP_SLAVE_INTMASK1_MASK GENMASK(16, 0) + +#define CDNS_MCP_PORT_INTSTAT 0x64 +#define CDNS_MCP_PDI_STAT 0x6C + +#define CDNS_MCP_FIFOLEVEL 0x78 +#define CDNS_MCP_FIFOSTAT 0x7C +#define CDNS_MCP_RX_FIFO_AVAIL GENMASK(5, 0) + +#define CDNS_MCP_CMD_BASE 0x80 +#define CDNS_MCP_RESP_BASE 0x80 +#define CDNS_MCP_CMD_LEN 0x20 +#define CDNS_MCP_CMD_WORD_LEN 0x4 + +#define CDNS_MCP_CMD_SSP_TAG BIT(31) +#define CDNS_MCP_CMD_COMMAND GENMASK(30, 28) +#define CDNS_MCP_CMD_DEV_ADDR GENMASK(27, 24) +#define CDNS_MCP_CMD_REG_ADDR_H GENMASK(23, 16) +#define CDNS_MCP_CMD_REG_ADDR_L GENMASK(15, 8) +#define CDNS_MCP_CMD_REG_DATA GENMASK(7, 0) + +#define CDNS_MCP_CMD_READ 2 +#define CDNS_MCP_CMD_WRITE 3 + +#define CDNS_MCP_RESP_RDATA GENMASK(15, 8) +#define CDNS_MCP_RESP_ACK BIT(0) +#define CDNS_MCP_RESP_NACK BIT(1) + +#define CDNS_DP_SIZE 128 + +#define CDNS_DPN_B0_CONFIG(n) (0x100 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_CH_EN(n) (0x104 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_SAMPLE_CTRL(n) (0x108 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_OFFSET_CTRL(n) (0x10C + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_HCTRL(n) (0x110 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B0_ASYNC_CTRL(n) (0x114 + CDNS_DP_SIZE * (n)) + +#define CDNS_DPN_B1_CONFIG(n) (0x118 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_CH_EN(n) (0x11C + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_SAMPLE_CTRL(n) (0x120 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_OFFSET_CTRL(n) (0x124 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_HCTRL(n) (0x128 + CDNS_DP_SIZE * (n)) +#define CDNS_DPN_B1_ASYNC_CTRL(n) (0x12C + CDNS_DP_SIZE * (n)) + +#define CDNS_DPN_CONFIG_BPM BIT(18) +#define CDNS_DPN_CONFIG_BGC GENMASK(17, 16) +#define CDNS_DPN_CONFIG_WL GENMASK(12, 8) +#define CDNS_DPN_CONFIG_PORT_DAT GENMASK(3, 2) +#define CDNS_DPN_CONFIG_PORT_FLOW GENMASK(1, 0) + +#define CDNS_DPN_SAMPLE_CTRL_SI GENMASK(15, 0) + +#define CDNS_DPN_OFFSET_CTRL_1 GENMASK(7, 0) +#define CDNS_DPN_OFFSET_CTRL_2 GENMASK(15, 8) + +#define CDNS_DPN_HCTRL_HSTOP GENMASK(3, 0) +#define CDNS_DPN_HCTRL_HSTART GENMASK(7, 4) +#define CDNS_DPN_HCTRL_LCTRL GENMASK(10, 8) + +#define CDNS_PORTCTRL 0x130 +#define CDNS_PORTCTRL_DIRN BIT(7) +#define CDNS_PORTCTRL_BANK_INVERT BIT(8) + +#define CDNS_PORT_OFFSET 0x80 + +#define CDNS_PDI_CONFIG(n) (0x1100 + (n) * 16) + +#define CDNS_PDI_CONFIG_SOFT_RESET BIT(24) +#define CDNS_PDI_CONFIG_CHANNEL GENMASK(15, 8) +#define CDNS_PDI_CONFIG_PORT GENMASK(4, 0) + +/* Driver defaults */ + +#define CDNS_DEFAULT_CLK_DIVIDER 0 +#define CDNS_DEFAULT_FRAME_SHAPE 0x30 +#define CDNS_DEFAULT_SSP_INTERVAL 0x18 +#define CDNS_TX_TIMEOUT 2000 + +#define CDNS_PCM_PDI_OFFSET 0x2 +#define CDNS_PDM_PDI_OFFSET 0x6 + +#define CDNS_SCP_RX_FIFOLEVEL 0x2 + +/* + * register accessor helpers + */ +static inline u32 cdns_readl(struct sdw_cdns *cdns, int offset) +{ + return readl(cdns->registers + offset); +} + +static inline void cdns_writel(struct sdw_cdns *cdns, int offset, u32 value) +{ + writel(value, cdns->registers + offset); +} + +static inline void cdns_updatel(struct sdw_cdns *cdns, + int offset, u32 mask, u32 val) +{ + u32 tmp; + + tmp = cdns_readl(cdns, offset); + tmp = (tmp & ~mask) | val; + cdns_writel(cdns, offset, tmp); +} + +static int cdns_clear_bit(struct sdw_cdns *cdns, int offset, u32 value) +{ + int timeout = 10; + u32 reg_read; + + writel(value, cdns->registers + offset); + + /* Wait for bit to be self cleared */ + do { + reg_read = readl(cdns->registers + offset); + if ((reg_read & value) == 0) + return 0; + + timeout--; + udelay(50); + } while (timeout != 0); + + return -EAGAIN; +} + +/* + * IO Calls + */ +static enum sdw_command_response cdns_fill_msg_resp( + struct sdw_cdns *cdns, + struct sdw_msg *msg, int count, int offset) +{ + int nack = 0, no_ack = 0; + int i; + + /* check message response */ + for (i = 0; i < count; i++) { + if (!(cdns->response_buf[i] & CDNS_MCP_RESP_ACK)) { + no_ack = 1; + dev_dbg(cdns->dev, "Msg Ack not received\n"); + if (cdns->response_buf[i] & CDNS_MCP_RESP_NACK) { + nack = 1; + dev_err(cdns->dev, "Msg NACK received\n"); + } + } + } + + if (nack) { + dev_err(cdns->dev, "Msg NACKed for Slave %d\n", msg->dev_num); + return SDW_CMD_FAIL; + } else if (no_ack) { + dev_dbg(cdns->dev, "Msg ignored for Slave %d\n", msg->dev_num); + return SDW_CMD_IGNORED; + } + + /* fill response */ + for (i = 0; i < count; i++) + msg->buf[i + offset] = cdns->response_buf[i] >> + SDW_REG_SHIFT(CDNS_MCP_RESP_RDATA); + + return SDW_CMD_OK; +} + +static enum sdw_command_response +_cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, + int offset, int count, bool defer) +{ + unsigned long time; + u32 base, i, data; + u16 addr; + + /* Program the watermark level for RX FIFO */ + if (cdns->msg_count != count) { + cdns_writel(cdns, CDNS_MCP_FIFOLEVEL, count); + cdns->msg_count = count; + } + + base = CDNS_MCP_CMD_BASE; + addr = msg->addr; + + for (i = 0; i < count; i++) { + data = msg->dev_num << SDW_REG_SHIFT(CDNS_MCP_CMD_DEV_ADDR); + data |= cmd << SDW_REG_SHIFT(CDNS_MCP_CMD_COMMAND); + data |= addr++ << SDW_REG_SHIFT(CDNS_MCP_CMD_REG_ADDR_L); + + if (msg->flags == SDW_MSG_FLAG_WRITE) + data |= msg->buf[i + offset]; + + data |= msg->ssp_sync << SDW_REG_SHIFT(CDNS_MCP_CMD_SSP_TAG); + cdns_writel(cdns, base, data); + base += CDNS_MCP_CMD_WORD_LEN; + } + + if (defer) + return SDW_CMD_OK; + + /* wait for timeout or response */ + time = wait_for_completion_timeout(&cdns->tx_complete, + msecs_to_jiffies(CDNS_TX_TIMEOUT)); + if (!time) { + dev_err(cdns->dev, "IO transfer timed out\n"); + msg->len = 0; + return SDW_CMD_TIMEOUT; + } + + return cdns_fill_msg_resp(cdns, msg, count, offset); +} + +static enum sdw_command_response cdns_program_scp_addr( + struct sdw_cdns *cdns, struct sdw_msg *msg) +{ + int nack = 0, no_ack = 0; + unsigned long time; + u32 data[2], base; + int i; + + /* Program the watermark level for RX FIFO */ + if (cdns->msg_count != CDNS_SCP_RX_FIFOLEVEL) { + cdns_writel(cdns, CDNS_MCP_FIFOLEVEL, CDNS_SCP_RX_FIFOLEVEL); + cdns->msg_count = CDNS_SCP_RX_FIFOLEVEL; + } + + data[0] = msg->dev_num << SDW_REG_SHIFT(CDNS_MCP_CMD_DEV_ADDR); + data[0] |= 0x3 << SDW_REG_SHIFT(CDNS_MCP_CMD_COMMAND); + data[1] = data[0]; + + data[0] |= SDW_SCP_ADDRPAGE1 << SDW_REG_SHIFT(CDNS_MCP_CMD_REG_ADDR_L); + data[1] |= SDW_SCP_ADDRPAGE2 << SDW_REG_SHIFT(CDNS_MCP_CMD_REG_ADDR_L); + + data[0] |= msg->addr_page1; + data[1] |= msg->addr_page2; + + base = CDNS_MCP_CMD_BASE; + cdns_writel(cdns, base, data[0]); + base += CDNS_MCP_CMD_WORD_LEN; + cdns_writel(cdns, base, data[1]); + + time = wait_for_completion_timeout(&cdns->tx_complete, + msecs_to_jiffies(CDNS_TX_TIMEOUT)); + if (!time) { + dev_err(cdns->dev, "SCP Msg trf timed out\n"); + msg->len = 0; + return SDW_CMD_TIMEOUT; + } + + /* check response the writes */ + for (i = 0; i < 2; i++) { + if (!(cdns->response_buf[i] & CDNS_MCP_RESP_ACK)) { + no_ack = 1; + dev_err(cdns->dev, "Program SCP Ack not received"); + if (cdns->response_buf[i] & CDNS_MCP_RESP_NACK) { + nack = 1; + dev_err(cdns->dev, "Program SCP NACK received"); + } + } + } + + /* For NACK, NO ack, don't return err if we are in Broadcast mode */ + if (nack) { + dev_err(cdns->dev, + "SCP_addrpage NACKed for Slave %d", msg->dev_num); + return SDW_CMD_FAIL; + } else if (no_ack) { + dev_dbg(cdns->dev, + "SCP_addrpage ignored for Slave %d", msg->dev_num); + return SDW_CMD_IGNORED; + } + + return SDW_CMD_OK; +} + +static int cdns_prep_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int *cmd) +{ + int ret; + + if (msg->page) { + ret = cdns_program_scp_addr(cdns, msg); + if (ret) { + msg->len = 0; + return ret; + } + } + + switch (msg->flags) { + case SDW_MSG_FLAG_READ: + *cmd = CDNS_MCP_CMD_READ; + break; + + case SDW_MSG_FLAG_WRITE: + *cmd = CDNS_MCP_CMD_WRITE; + break; + + default: + dev_err(cdns->dev, "Invalid msg cmd: %d\n", msg->flags); + return -EINVAL; + } + + return 0; +} + +static enum sdw_command_response +cdns_xfer_msg(struct sdw_bus *bus, struct sdw_msg *msg) +{ + struct sdw_cdns *cdns = bus_to_cdns(bus); + int cmd = 0, ret, i; + + ret = cdns_prep_msg(cdns, msg, &cmd); + if (ret) + return SDW_CMD_FAIL_OTHER; + + for (i = 0; i < msg->len / CDNS_MCP_CMD_LEN; i++) { + ret = _cdns_xfer_msg(cdns, msg, cmd, i * CDNS_MCP_CMD_LEN, + CDNS_MCP_CMD_LEN, false); + if (ret < 0) + goto exit; + } + + if (!(msg->len % CDNS_MCP_CMD_LEN)) + goto exit; + + ret = _cdns_xfer_msg(cdns, msg, cmd, i * CDNS_MCP_CMD_LEN, + msg->len % CDNS_MCP_CMD_LEN, false); + +exit: + return ret; +} + +static enum sdw_command_response +cdns_xfer_msg_defer(struct sdw_bus *bus, + struct sdw_msg *msg, struct sdw_defer *defer) +{ + struct sdw_cdns *cdns = bus_to_cdns(bus); + int cmd = 0, ret; + + /* for defer only 1 message is supported */ + if (msg->len > 1) + return -ENOTSUPP; + + ret = cdns_prep_msg(cdns, msg, &cmd); + if (ret) + return SDW_CMD_FAIL_OTHER; + + cdns->defer = defer; + cdns->defer->length = msg->len; + + return _cdns_xfer_msg(cdns, msg, cmd, 0, msg->len, true); +} + +static enum sdw_command_response +cdns_reset_page_addr(struct sdw_bus *bus, unsigned int dev_num) +{ + struct sdw_cdns *cdns = bus_to_cdns(bus); + struct sdw_msg msg; + + /* Create dummy message with valid device number */ + memset(&msg, 0, sizeof(msg)); + msg.dev_num = dev_num; + + return cdns_program_scp_addr(cdns, &msg); +} + +/* + * IRQ handling + */ + +static void cdns_read_response(struct sdw_cdns *cdns) +{ + u32 num_resp, cmd_base; + int i; + + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); + num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + + cmd_base = CDNS_MCP_CMD_BASE; + + for (i = 0; i < num_resp; i++) { + cdns->response_buf[i] = cdns_readl(cdns, cmd_base); + cmd_base += CDNS_MCP_CMD_WORD_LEN; + } +} + +static int cdns_update_slave_status(struct sdw_cdns *cdns, + u32 slave0, u32 slave1) +{ + enum sdw_slave_status status[SDW_MAX_DEVICES + 1]; + bool is_slave = false; + u64 slave, mask; + int i, set_status; + + /* combine the two status */ + slave = ((u64)slave1 << 32) | slave0; + memset(status, 0, sizeof(status)); + + for (i = 0; i <= SDW_MAX_DEVICES; i++) { + mask = (slave >> (i * CDNS_MCP_SLAVE_STATUS_NUM)) & + CDNS_MCP_SLAVE_STATUS_BITS; + if (!mask) + continue; + + is_slave = true; + set_status = 0; + + if (mask & CDNS_MCP_SLAVE_INTSTAT_RESERVED) { + status[i] = SDW_SLAVE_RESERVED; + set_status++; + } + + if (mask & CDNS_MCP_SLAVE_INTSTAT_ATTACHED) { + status[i] = SDW_SLAVE_ATTACHED; + set_status++; + } + + if (mask & CDNS_MCP_SLAVE_INTSTAT_ALERT) { + status[i] = SDW_SLAVE_ALERT; + set_status++; + } + + if (mask & CDNS_MCP_SLAVE_INTSTAT_NPRESENT) { + status[i] = SDW_SLAVE_UNATTACHED; + set_status++; + } + + /* first check if Slave reported multiple status */ + if (set_status > 1) { + dev_warn(cdns->dev, + "Slave reported multiple Status: %d\n", + status[i]); + /* + * TODO: we need to reread the status here by + * issuing a PING cmd + */ + } + } + + if (is_slave) + return sdw_handle_slave_status(&cdns->bus, status); + + return 0; +} + +/** + * sdw_cdns_irq() - Cadence interrupt handler + * @irq: irq number + * @dev_id: irq context + */ +irqreturn_t sdw_cdns_irq(int irq, void *dev_id) +{ + struct sdw_cdns *cdns = dev_id; + u32 int_status; + int ret = IRQ_HANDLED; + + /* Check if the link is up */ + if (!cdns->link_up) + return IRQ_NONE; + + int_status = cdns_readl(cdns, CDNS_MCP_INTSTAT); + + if (!(int_status & CDNS_MCP_INT_IRQ)) + return IRQ_NONE; + + if (int_status & CDNS_MCP_INT_RX_WL) { + cdns_read_response(cdns); + + if (cdns->defer) { + cdns_fill_msg_resp(cdns, cdns->defer->msg, + cdns->defer->length, 0); + complete(&cdns->defer->complete); + cdns->defer = NULL; + } else + complete(&cdns->tx_complete); + } + + if (int_status & CDNS_MCP_INT_CTRL_CLASH) { + + /* Slave is driving bit slot during control word */ + dev_err_ratelimited(cdns->dev, "Bus clash for control word\n"); + int_status |= CDNS_MCP_INT_CTRL_CLASH; + } + + if (int_status & CDNS_MCP_INT_DATA_CLASH) { + /* + * Multiple slaves trying to drive bit slot, or issue with + * ownership of data bits or Slave gone bonkers + */ + dev_err_ratelimited(cdns->dev, "Bus clash for data word\n"); + int_status |= CDNS_MCP_INT_DATA_CLASH; + } + + if (int_status & CDNS_MCP_INT_SLAVE_MASK) { + /* Mask the Slave interrupt and wake thread */ + cdns_updatel(cdns, CDNS_MCP_INTMASK, + CDNS_MCP_INT_SLAVE_MASK, 0); + + int_status &= ~CDNS_MCP_INT_SLAVE_MASK; + ret = IRQ_WAKE_THREAD; + } + + cdns_writel(cdns, CDNS_MCP_INTSTAT, int_status); + return ret; +} +EXPORT_SYMBOL(sdw_cdns_irq); + +/** + * sdw_cdns_thread() - Cadence irq thread handler + * @irq: irq number + * @dev_id: irq context + */ +irqreturn_t sdw_cdns_thread(int irq, void *dev_id) +{ + struct sdw_cdns *cdns = dev_id; + u32 slave0, slave1; + + dev_dbg(cdns->dev, "Slave status change\n"); + + slave0 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT0); + slave1 = cdns_readl(cdns, CDNS_MCP_SLAVE_INTSTAT1); + + cdns_update_slave_status(cdns, slave0, slave1); + cdns_writel(cdns, CDNS_MCP_SLAVE_INTSTAT0, slave0); + cdns_writel(cdns, CDNS_MCP_SLAVE_INTSTAT1, slave1); + + /* clear and unmask Slave interrupt now */ + cdns_writel(cdns, CDNS_MCP_INTSTAT, CDNS_MCP_INT_SLAVE_MASK); + cdns_updatel(cdns, CDNS_MCP_INTMASK, + CDNS_MCP_INT_SLAVE_MASK, CDNS_MCP_INT_SLAVE_MASK); + + return IRQ_HANDLED; +} +EXPORT_SYMBOL(sdw_cdns_thread); + +/* + * init routines + */ +static int _cdns_enable_interrupt(struct sdw_cdns *cdns) +{ + u32 mask; + + cdns_writel(cdns, CDNS_MCP_SLAVE_INTMASK0, + CDNS_MCP_SLAVE_INTMASK0_MASK); + cdns_writel(cdns, CDNS_MCP_SLAVE_INTMASK1, + CDNS_MCP_SLAVE_INTMASK1_MASK); + + mask = CDNS_MCP_INT_SLAVE_RSVD | CDNS_MCP_INT_SLAVE_ALERT | + CDNS_MCP_INT_SLAVE_ATTACH | CDNS_MCP_INT_SLAVE_NATTACH | + CDNS_MCP_INT_CTRL_CLASH | CDNS_MCP_INT_DATA_CLASH | + CDNS_MCP_INT_RX_WL | CDNS_MCP_INT_IRQ | CDNS_MCP_INT_DPINT; + + cdns_writel(cdns, CDNS_MCP_INTMASK, mask); + + return 0; +} + +/** + * sdw_cdns_enable_interrupt() - Enable SDW interrupts and update config + * @cdns: Cadence instance + */ +int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns) +{ + int ret; + + _cdns_enable_interrupt(cdns); + ret = cdns_clear_bit(cdns, CDNS_MCP_CONFIG_UPDATE, + CDNS_MCP_CONFIG_UPDATE_BIT); + if (ret < 0) + dev_err(cdns->dev, "Config update timedout"); + + return ret; +} +EXPORT_SYMBOL(sdw_cdns_enable_interrupt); + +/** + * sdw_cdns_init() - Cadence initialization + * @cdns: Cadence instance + */ +int sdw_cdns_init(struct sdw_cdns *cdns) +{ + u32 val; + int ret; + + /* Exit clock stop */ + ret = cdns_clear_bit(cdns, CDNS_MCP_CONTROL, + CDNS_MCP_CONTROL_CLK_STOP_CLR); + if (ret < 0) { + dev_err(cdns->dev, "Couldn't exit from clock stop\n"); + return ret; + } + + /* Set clock divider */ + val = cdns_readl(cdns, CDNS_MCP_CLK_CTRL0); + val |= CDNS_DEFAULT_CLK_DIVIDER; + cdns_writel(cdns, CDNS_MCP_CLK_CTRL0, val); + + /* Set the default frame shape */ + cdns_writel(cdns, CDNS_MCP_FRAME_SHAPE_INIT, CDNS_DEFAULT_FRAME_SHAPE); + + /* Set SSP interval to default value */ + cdns_writel(cdns, CDNS_MCP_SSP_CTRL0, CDNS_DEFAULT_SSP_INTERVAL); + cdns_writel(cdns, CDNS_MCP_SSP_CTRL1, CDNS_DEFAULT_SSP_INTERVAL); + + /* Set cmd accept mode */ + cdns_updatel(cdns, CDNS_MCP_CONTROL, CDNS_MCP_CONTROL_CMD_ACCEPT, + CDNS_MCP_CONTROL_CMD_ACCEPT); + + /* Configure mcp config */ + val = cdns_readl(cdns, CDNS_MCP_CONFIG); + + /* Set Max cmd retry to 15 */ + val |= CDNS_MCP_CONFIG_MCMD_RETRY; + + /* Set frame delay between PREQ and ping frame to 15 frames */ + val |= 0xF << SDW_REG_SHIFT(CDNS_MCP_CONFIG_MPREQ_DELAY); + + /* Disable auto bus release */ + val &= ~CDNS_MCP_CONFIG_BUS_REL; + + /* Disable sniffer mode */ + val &= ~CDNS_MCP_CONFIG_SNIFFER; + + /* Set cmd mode for Tx and Rx cmds */ + val &= ~CDNS_MCP_CONFIG_CMD; + + /* Set operation to normal */ + val &= ~CDNS_MCP_CONFIG_OP; + val |= CDNS_MCP_CONFIG_OP_NORMAL; + + cdns_writel(cdns, CDNS_MCP_CONFIG, val); + + return 0; +} +EXPORT_SYMBOL(sdw_cdns_init); + +struct sdw_master_ops sdw_cdns_master_ops = { + .read_prop = sdw_master_read_prop, + .xfer_msg = cdns_xfer_msg, + .xfer_msg_defer = cdns_xfer_msg_defer, + .reset_page_addr = cdns_reset_page_addr, +}; +EXPORT_SYMBOL(sdw_cdns_master_ops); + +/** + * sdw_cdns_probe() - Cadence probe routine + * @cdns: Cadence instance + */ +int sdw_cdns_probe(struct sdw_cdns *cdns) +{ + init_completion(&cdns->tx_complete); + + return 0; +} +EXPORT_SYMBOL(sdw_cdns_probe); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("Cadence Soundwire Library"); diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h new file mode 100644 index 000000000000..beaf6c9804eb --- /dev/null +++ b/drivers/soundwire/cadence_master.h @@ -0,0 +1,48 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_CADENCE_H +#define __SDW_CADENCE_H + +/** + * struct sdw_cdns - Cadence driver context + * @dev: Linux device + * @bus: Bus handle + * @instance: instance number + * @response_buf: SoundWire response buffer + * @tx_complete: Tx completion + * @defer: Defer pointer + * @registers: Cadence registers + * @link_up: Link status + * @msg_count: Messages sent on bus + */ +struct sdw_cdns { + struct device *dev; + struct sdw_bus bus; + unsigned int instance; + + u32 response_buf[0x80]; + struct completion tx_complete; + struct sdw_defer *defer; + + void __iomem *registers; + + bool link_up; + unsigned int msg_count; +}; + +#define bus_to_cdns(_bus) container_of(_bus, struct sdw_cdns, bus) + +/* Exported symbols */ + +int sdw_cdns_probe(struct sdw_cdns *cdns); +extern struct sdw_master_ops sdw_cdns_master_ops; + +irqreturn_t sdw_cdns_irq(int irq, void *dev_id); +irqreturn_t sdw_cdns_thread(int irq, void *dev_id); + +int sdw_cdns_init(struct sdw_cdns *cdns); +int sdw_cdns_enable_interrupt(struct sdw_cdns *cdns); + + +#endif /* __SDW_CADENCE_H */ diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c new file mode 100644 index 000000000000..86a7bd1fc912 --- /dev/null +++ b/drivers/soundwire/intel.c @@ -0,0 +1,345 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +/* + * Soundwire Intel Master Driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include "cadence_master.h" +#include "intel.h" + +/* Intel SHIM Registers Definition */ +#define SDW_SHIM_LCAP 0x0 +#define SDW_SHIM_LCTL 0x4 +#define SDW_SHIM_IPPTR 0x8 +#define SDW_SHIM_SYNC 0xC + +#define SDW_SHIM_CTLSCAP(x) (0x010 + 0x60 * x) +#define SDW_SHIM_CTLS0CM(x) (0x012 + 0x60 * x) +#define SDW_SHIM_CTLS1CM(x) (0x014 + 0x60 * x) +#define SDW_SHIM_CTLS2CM(x) (0x016 + 0x60 * x) +#define SDW_SHIM_CTLS3CM(x) (0x018 + 0x60 * x) +#define SDW_SHIM_PCMSCAP(x) (0x020 + 0x60 * x) + +#define SDW_SHIM_PCMSYCHM(x, y) (0x022 + (0x60 * x) + (0x2 * y)) +#define SDW_SHIM_PCMSYCHC(x, y) (0x042 + (0x60 * x) + (0x2 * y)) +#define SDW_SHIM_PDMSCAP(x) (0x062 + 0x60 * x) +#define SDW_SHIM_IOCTL(x) (0x06C + 0x60 * x) +#define SDW_SHIM_CTMCTL(x) (0x06E + 0x60 * x) + +#define SDW_SHIM_WAKEEN 0x190 +#define SDW_SHIM_WAKESTS 0x192 + +#define SDW_SHIM_LCTL_SPA BIT(0) +#define SDW_SHIM_LCTL_CPA BIT(8) + +#define SDW_SHIM_SYNC_SYNCPRD_VAL 0x176F +#define SDW_SHIM_SYNC_SYNCPRD GENMASK(14, 0) +#define SDW_SHIM_SYNC_SYNCCPU BIT(15) +#define SDW_SHIM_SYNC_CMDSYNC_MASK GENMASK(19, 16) +#define SDW_SHIM_SYNC_CMDSYNC BIT(16) +#define SDW_SHIM_SYNC_SYNCGO BIT(24) + +#define SDW_SHIM_PCMSCAP_ISS GENMASK(3, 0) +#define SDW_SHIM_PCMSCAP_OSS GENMASK(7, 4) +#define SDW_SHIM_PCMSCAP_BSS GENMASK(12, 8) + +#define SDW_SHIM_PCMSYCM_LCHN GENMASK(3, 0) +#define SDW_SHIM_PCMSYCM_HCHN GENMASK(7, 4) +#define SDW_SHIM_PCMSYCM_STREAM GENMASK(13, 8) +#define SDW_SHIM_PCMSYCM_DIR BIT(15) + +#define SDW_SHIM_PDMSCAP_ISS GENMASK(3, 0) +#define SDW_SHIM_PDMSCAP_OSS GENMASK(7, 4) +#define SDW_SHIM_PDMSCAP_BSS GENMASK(12, 8) +#define SDW_SHIM_PDMSCAP_CPSS GENMASK(15, 13) + +#define SDW_SHIM_IOCTL_MIF BIT(0) +#define SDW_SHIM_IOCTL_CO BIT(1) +#define SDW_SHIM_IOCTL_COE BIT(2) +#define SDW_SHIM_IOCTL_DO BIT(3) +#define SDW_SHIM_IOCTL_DOE BIT(4) +#define SDW_SHIM_IOCTL_BKE BIT(5) +#define SDW_SHIM_IOCTL_WPDD BIT(6) +#define SDW_SHIM_IOCTL_CIBD BIT(8) +#define SDW_SHIM_IOCTL_DIBD BIT(9) + +#define SDW_SHIM_CTMCTL_DACTQE BIT(0) +#define SDW_SHIM_CTMCTL_DODS BIT(1) +#define SDW_SHIM_CTMCTL_DOAIS GENMASK(4, 3) + +#define SDW_SHIM_WAKEEN_ENABLE BIT(0) +#define SDW_SHIM_WAKESTS_STATUS BIT(0) + +/* Intel ALH Register definitions */ +#define SDW_ALH_STRMZCFG(x) (0x000 + (0x4 * x)) + +#define SDW_ALH_STRMZCFG_DMAT_VAL 0x3 +#define SDW_ALH_STRMZCFG_DMAT GENMASK(7, 0) +#define SDW_ALH_STRMZCFG_CHN GENMASK(19, 16) + +struct sdw_intel { + struct sdw_cdns cdns; + int instance; + struct sdw_intel_link_res *res; +}; + +#define cdns_to_intel(_cdns) container_of(_cdns, struct sdw_intel, cdns) + +/* + * Read, write helpers for HW registers + */ +static inline int intel_readl(void __iomem *base, int offset) +{ + return readl(base + offset); +} + +static inline void intel_writel(void __iomem *base, int offset, int value) +{ + writel(value, base + offset); +} + +static inline u16 intel_readw(void __iomem *base, int offset) +{ + return readw(base + offset); +} + +static inline void intel_writew(void __iomem *base, int offset, u16 value) +{ + writew(value, base + offset); +} + +static int intel_clear_bit(void __iomem *base, int offset, u32 value, u32 mask) +{ + int timeout = 10; + u32 reg_read; + + writel(value, base + offset); + do { + reg_read = readl(base + offset); + if (!(reg_read & mask)) + return 0; + + timeout--; + udelay(50); + } while (timeout != 0); + + return -EAGAIN; +} + +static int intel_set_bit(void __iomem *base, int offset, u32 value, u32 mask) +{ + int timeout = 10; + u32 reg_read; + + writel(value, base + offset); + do { + reg_read = readl(base + offset); + if (reg_read & mask) + return 0; + + timeout--; + udelay(50); + } while (timeout != 0); + + return -EAGAIN; +} + +/* + * shim ops + */ + +static int intel_link_power_up(struct sdw_intel *sdw) +{ + unsigned int link_id = sdw->instance; + void __iomem *shim = sdw->res->shim; + int spa_mask, cpa_mask; + int link_control, ret; + + /* Link power up sequence */ + link_control = intel_readl(shim, SDW_SHIM_LCTL); + spa_mask = (SDW_SHIM_LCTL_SPA << link_id); + cpa_mask = (SDW_SHIM_LCTL_CPA << link_id); + link_control |= spa_mask; + + ret = intel_set_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask); + if (ret < 0) + return ret; + + sdw->cdns.link_up = true; + return 0; +} + +static int intel_shim_init(struct sdw_intel *sdw) +{ + void __iomem *shim = sdw->res->shim; + unsigned int link_id = sdw->instance; + int sync_reg, ret; + u16 ioctl = 0, act = 0; + + /* Initialize Shim */ + ioctl |= SDW_SHIM_IOCTL_BKE; + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl |= SDW_SHIM_IOCTL_WPDD; + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl |= SDW_SHIM_IOCTL_DO; + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl |= SDW_SHIM_IOCTL_DOE; + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + /* Switch to MIP from Glue logic */ + ioctl = intel_readw(shim, SDW_SHIM_IOCTL(link_id)); + + ioctl &= ~(SDW_SHIM_IOCTL_DOE); + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl &= ~(SDW_SHIM_IOCTL_DO); + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl |= (SDW_SHIM_IOCTL_MIF); + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + ioctl &= ~(SDW_SHIM_IOCTL_BKE); + ioctl &= ~(SDW_SHIM_IOCTL_COE); + + intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl); + + act |= 0x1 << SDW_REG_SHIFT(SDW_SHIM_CTMCTL_DOAIS); + act |= SDW_SHIM_CTMCTL_DACTQE; + act |= SDW_SHIM_CTMCTL_DODS; + intel_writew(shim, SDW_SHIM_CTMCTL(link_id), act); + + /* Now set SyncPRD period */ + sync_reg = intel_readl(shim, SDW_SHIM_SYNC); + sync_reg |= (SDW_SHIM_SYNC_SYNCPRD_VAL << + SDW_REG_SHIFT(SDW_SHIM_SYNC_SYNCPRD)); + + /* Set SyncCPU bit */ + sync_reg |= SDW_SHIM_SYNC_SYNCCPU; + ret = intel_clear_bit(shim, SDW_SHIM_SYNC, sync_reg, + SDW_SHIM_SYNC_SYNCCPU); + if (ret < 0) + dev_err(sdw->cdns.dev, "Failed to set sync period: %d", ret); + + return ret; +} + +static int intel_prop_read(struct sdw_bus *bus) +{ + /* Initialize with default handler to read all DisCo properties */ + sdw_master_read_prop(bus); + + /* BIOS is not giving some values correctly. So, lets override them */ + bus->prop.num_freq = 1; + bus->prop.freq = devm_kcalloc(bus->dev, sizeof(*bus->prop.freq), + bus->prop.num_freq, GFP_KERNEL); + if (!bus->prop.freq) + return -ENOMEM; + + bus->prop.freq[0] = bus->prop.max_freq; + bus->prop.err_threshold = 5; + + return 0; +} + +/* + * probe and init + */ +static int intel_probe(struct platform_device *pdev) +{ + struct sdw_intel *sdw; + int ret; + + sdw = devm_kzalloc(&pdev->dev, sizeof(*sdw), GFP_KERNEL); + if (!sdw) + return -ENOMEM; + + sdw->instance = pdev->id; + sdw->res = dev_get_platdata(&pdev->dev); + sdw->cdns.dev = &pdev->dev; + sdw->cdns.registers = sdw->res->registers; + sdw->cdns.instance = sdw->instance; + sdw->cdns.msg_count = 0; + sdw->cdns.bus.dev = &pdev->dev; + sdw->cdns.bus.link_id = pdev->id; + + sdw_cdns_probe(&sdw->cdns); + + /* Set property read ops */ + sdw_cdns_master_ops.read_prop = intel_prop_read; + sdw->cdns.bus.ops = &sdw_cdns_master_ops; + + platform_set_drvdata(pdev, sdw); + + ret = sdw_add_bus_master(&sdw->cdns.bus); + if (ret) { + dev_err(&pdev->dev, "sdw_add_bus_master fail: %d\n", ret); + goto err_master_reg; + } + + /* Initialize shim and controller */ + intel_link_power_up(sdw); + intel_shim_init(sdw); + + ret = sdw_cdns_init(&sdw->cdns); + if (ret) + goto err_init; + + ret = sdw_cdns_enable_interrupt(&sdw->cdns); + if (ret) + goto err_init; + + /* Acquire IRQ */ + ret = request_threaded_irq(sdw->res->irq, sdw_cdns_irq, + sdw_cdns_thread, IRQF_SHARED, KBUILD_MODNAME, + &sdw->cdns); + if (ret < 0) { + dev_err(sdw->cdns.dev, "unable to grab IRQ %d, disabling device\n", + sdw->res->irq); + goto err_init; + } + + return 0; + +err_init: + sdw_delete_bus_master(&sdw->cdns.bus); +err_master_reg: + return ret; +} + +static int intel_remove(struct platform_device *pdev) +{ + struct sdw_intel *sdw; + + sdw = platform_get_drvdata(pdev); + + free_irq(sdw->res->irq, sdw); + sdw_delete_bus_master(&sdw->cdns.bus); + + return 0; +} + +static struct platform_driver sdw_intel_drv = { + .probe = intel_probe, + .remove = intel_remove, + .driver = { + .name = "int-sdw", + + }, +}; + +module_platform_driver(sdw_intel_drv); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_ALIAS("platform:int-sdw"); +MODULE_DESCRIPTION("Intel Soundwire Master Driver"); diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h new file mode 100644 index 000000000000..ffa30d9535a2 --- /dev/null +++ b/drivers/soundwire/intel.h @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_INTEL_LOCAL_H +#define __SDW_INTEL_LOCAL_H + +/** + * struct sdw_intel_res - Soundwire link resources + * @registers: Link IO registers base + * @shim: Audio shim pointer + * @alh: ALH (Audio Link Hub) pointer + * @irq: Interrupt line + * + * This is set as pdata for each link instance. + */ +struct sdw_intel_link_res { + void __iomem *registers; + void __iomem *shim; + void __iomem *alh; + int irq; +}; + +#endif /* __SDW_INTEL_LOCAL_H */ diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c new file mode 100644 index 000000000000..6f2bb99526f2 --- /dev/null +++ b/drivers/soundwire/intel_init.c @@ -0,0 +1,198 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +/* + * SDW Intel Init Routines + * + * Initializes and creates SDW devices based on ACPI and Hardware values + */ + +#include +#include +#include +#include "intel.h" + +#define SDW_MAX_LINKS 4 +#define SDW_SHIM_LCAP 0x0 +#define SDW_SHIM_BASE 0x2C000 +#define SDW_ALH_BASE 0x2C800 +#define SDW_LINK_BASE 0x30000 +#define SDW_LINK_SIZE 0x10000 + +struct sdw_link_data { + struct sdw_intel_link_res res; + struct platform_device *pdev; +}; + +struct sdw_intel_ctx { + int count; + struct sdw_link_data *links; +}; + +static int sdw_intel_cleanup_pdev(struct sdw_intel_ctx *ctx) +{ + struct sdw_link_data *link = ctx->links; + int i; + + if (!link) + return 0; + + for (i = 0; i < ctx->count; i++) { + if (link->pdev) + platform_device_unregister(link->pdev); + link++; + } + + kfree(ctx->links); + ctx->links = NULL; + + return 0; +} + +static struct sdw_intel_ctx +*sdw_intel_add_controller(struct sdw_intel_res *res) +{ + struct platform_device_info pdevinfo; + struct platform_device *pdev; + struct sdw_link_data *link; + struct sdw_intel_ctx *ctx; + struct acpi_device *adev; + int ret, i; + u8 count; + u32 caps; + + if (acpi_bus_get_device(res->handle, &adev)) + return NULL; + + /* Found controller, find links supported */ + count = 0; + ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev), + "mipi-sdw-master-count", &count, 1); + + /* Don't fail on error, continue and use hw value */ + if (ret) { + dev_err(&adev->dev, + "Failed to read mipi-sdw-master-count: %d\n", ret); + count = SDW_MAX_LINKS; + } + + /* Check SNDWLCAP.LCOUNT */ + caps = ioread32(res->mmio_base + SDW_SHIM_BASE + SDW_SHIM_LCAP); + + /* Check HW supported vs property value and use min of two */ + count = min_t(u8, caps, count); + + /* Check count is within bounds */ + if (count > SDW_MAX_LINKS) { + dev_err(&adev->dev, "Link count %d exceeds max %d\n", + count, SDW_MAX_LINKS); + return NULL; + } + + dev_dbg(&adev->dev, "Creating %d SDW Link devices\n", count); + + ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return NULL; + + ctx->count = count; + ctx->links = kcalloc(ctx->count, sizeof(*ctx->links), GFP_KERNEL); + if (!ctx->links) + goto link_err; + + link = ctx->links; + + /* Create SDW Master devices */ + for (i = 0; i < count; i++) { + + link->res.irq = res->irq; + link->res.registers = res->mmio_base + SDW_LINK_BASE + + (SDW_LINK_SIZE * i); + link->res.shim = res->mmio_base + SDW_SHIM_BASE; + link->res.alh = res->mmio_base + SDW_ALH_BASE; + + memset(&pdevinfo, 0, sizeof(pdevinfo)); + + pdevinfo.parent = res->parent; + pdevinfo.name = "int-sdw"; + pdevinfo.id = i; + pdevinfo.fwnode = acpi_fwnode_handle(adev); + pdevinfo.data = &link->res; + pdevinfo.size_data = sizeof(link->res); + + pdev = platform_device_register_full(&pdevinfo); + if (IS_ERR(pdev)) { + dev_err(&adev->dev, + "platform device creation failed: %ld\n", + PTR_ERR(pdev)); + goto pdev_err; + } + + link->pdev = pdev; + link++; + } + + return ctx; + +pdev_err: + sdw_intel_cleanup_pdev(ctx); +link_err: + kfree(ctx); + return NULL; +} + +static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level, + void *cdata, void **return_value) +{ + struct sdw_intel_res *res = cdata; + struct acpi_device *adev; + + if (acpi_bus_get_device(handle, &adev)) { + dev_err(&adev->dev, "Couldn't find ACPI handle\n"); + return AE_NOT_FOUND; + } + + res->handle = handle; + return AE_OK; +} + +/** + * sdw_intel_init() - SoundWire Intel init routine + * @parent_handle: ACPI parent handle + * @res: resource data + * + * This scans the namespace and creates SoundWire link controller devices + * based on the info queried. + */ +void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res) +{ + acpi_status status; + + status = acpi_walk_namespace(ACPI_TYPE_DEVICE, + parent_handle, 1, + sdw_intel_acpi_cb, + NULL, res, NULL); + if (ACPI_FAILURE(status)) + return NULL; + + return sdw_intel_add_controller(res); +} +EXPORT_SYMBOL(sdw_intel_init); + +/** + * sdw_intel_exit() - SoundWire Intel exit + * @arg: callback context + * + * Delete the controller instances created and cleanup + */ +void sdw_intel_exit(void *arg) +{ + struct sdw_intel_ctx *ctx = arg; + + sdw_intel_cleanup_pdev(ctx); + kfree(ctx); +} +EXPORT_SYMBOL(sdw_intel_exit); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("Intel Soundwire Init Library"); diff --git a/drivers/soundwire/mipi_disco.c b/drivers/soundwire/mipi_disco.c new file mode 100644 index 000000000000..fdeba0c3b589 --- /dev/null +++ b/drivers/soundwire/mipi_disco.c @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +/* + * MIPI Discovery And Configuration (DisCo) Specification for SoundWire + * specifies properties to be implemented for SoundWire Masters and Slaves. + * The DisCo spec doesn't mandate these properties. However, SDW bus cannot + * work without knowing these values. + * + * The helper functions read the Master and Slave properties. Implementers + * of Master or Slave drivers can use any of the below three mechanisms: + * a) Use these APIs here as .read_prop() callback for Master and Slave + * b) Implement own methods and set those as .read_prop(), but invoke + * APIs in this file for generic read and override the values with + * platform specific data + * c) Implement ones own methods which do not use anything provided + * here + */ + +#include +#include +#include +#include +#include "bus.h" + +/** + * sdw_master_read_prop() - Read Master properties + * @bus: SDW bus instance + */ +int sdw_master_read_prop(struct sdw_bus *bus) +{ + struct sdw_master_prop *prop = &bus->prop; + struct fwnode_handle *link; + char name[32]; + int nval, i; + + device_property_read_u32(bus->dev, + "mipi-sdw-sw-interface-revision", &prop->revision); + + /* Find master handle */ + snprintf(name, sizeof(name), + "mipi-sdw-master-%d-subproperties", bus->link_id); + + link = device_get_named_child_node(bus->dev, name); + if (!link) { + dev_err(bus->dev, "Master node %s not found\n", name); + return -EIO; + } + + if (fwnode_property_read_bool(link, + "mipi-sdw-clock-stop-mode0-supported") == true) + prop->clk_stop_mode = SDW_CLK_STOP_MODE0; + + if (fwnode_property_read_bool(link, + "mipi-sdw-clock-stop-mode1-supported") == true) + prop->clk_stop_mode |= SDW_CLK_STOP_MODE1; + + fwnode_property_read_u32(link, + "mipi-sdw-max-clock-frequency", &prop->max_freq); + + nval = fwnode_property_read_u32_array(link, + "mipi-sdw-clock-frequencies-supported", NULL, 0); + if (nval > 0) { + + prop->num_freq = nval; + prop->freq = devm_kcalloc(bus->dev, prop->num_freq, + sizeof(*prop->freq), GFP_KERNEL); + if (!prop->freq) + return -ENOMEM; + + fwnode_property_read_u32_array(link, + "mipi-sdw-clock-frequencies-supported", + prop->freq, prop->num_freq); + } + + /* + * Check the frequencies supported. If FW doesn't provide max + * freq, then populate here by checking values. + */ + if (!prop->max_freq && prop->freq) { + prop->max_freq = prop->freq[0]; + for (i = 1; i < prop->num_freq; i++) { + if (prop->freq[i] > prop->max_freq) + prop->max_freq = prop->freq[i]; + } + } + + nval = fwnode_property_read_u32_array(link, + "mipi-sdw-supported-clock-gears", NULL, 0); + if (nval > 0) { + + prop->num_clk_gears = nval; + prop->clk_gears = devm_kcalloc(bus->dev, prop->num_clk_gears, + sizeof(*prop->clk_gears), GFP_KERNEL); + if (!prop->clk_gears) + return -ENOMEM; + + fwnode_property_read_u32_array(link, + "mipi-sdw-supported-clock-gears", + prop->clk_gears, prop->num_clk_gears); + } + + fwnode_property_read_u32(link, "mipi-sdw-default-frame-rate", + &prop->default_frame_rate); + + fwnode_property_read_u32(link, "mipi-sdw-default-frame-row-size", + &prop->default_row); + + fwnode_property_read_u32(link, "mipi-sdw-default-frame-col-size", + &prop->default_col); + + prop->dynamic_frame = fwnode_property_read_bool(link, + "mipi-sdw-dynamic-frame-shape"); + + fwnode_property_read_u32(link, "mipi-sdw-command-error-threshold", + &prop->err_threshold); + + return 0; +} +EXPORT_SYMBOL(sdw_master_read_prop); + +static int sdw_slave_read_dp0(struct sdw_slave *slave, + struct fwnode_handle *port, struct sdw_dp0_prop *dp0) +{ + int nval; + + fwnode_property_read_u32(port, "mipi-sdw-port-max-wordlength", + &dp0->max_word); + + fwnode_property_read_u32(port, "mipi-sdw-port-min-wordlength", + &dp0->min_word); + + nval = fwnode_property_read_u32_array(port, + "mipi-sdw-port-wordlength-configs", NULL, 0); + if (nval > 0) { + + dp0->num_words = nval; + dp0->words = devm_kcalloc(&slave->dev, + dp0->num_words, sizeof(*dp0->words), + GFP_KERNEL); + if (!dp0->words) + return -ENOMEM; + + fwnode_property_read_u32_array(port, + "mipi-sdw-port-wordlength-configs", + dp0->words, dp0->num_words); + } + + dp0->flow_controlled = fwnode_property_read_bool( + port, "mipi-sdw-bra-flow-controlled"); + + dp0->simple_ch_prep_sm = fwnode_property_read_bool( + port, "mipi-sdw-simplified-channel-prepare-sm"); + + dp0->device_interrupts = fwnode_property_read_bool( + port, "mipi-sdw-imp-def-dp0-interrupts-supported"); + + return 0; +} + +static int sdw_slave_read_dpn(struct sdw_slave *slave, + struct sdw_dpn_prop *dpn, int count, int ports, char *type) +{ + struct fwnode_handle *node; + u32 bit, i = 0; + int nval; + unsigned long addr; + char name[40]; + + addr = ports; + /* valid ports are 1 to 14 so apply mask */ + addr &= GENMASK(14, 1); + + for_each_set_bit(bit, &addr, 32) { + snprintf(name, sizeof(name), + "mipi-sdw-dp-%d-%s-subproperties", bit, type); + + dpn[i].num = bit; + + node = device_get_named_child_node(&slave->dev, name); + if (!node) { + dev_err(&slave->dev, "%s dpN not found\n", name); + return -EIO; + } + + fwnode_property_read_u32(node, "mipi-sdw-port-max-wordlength", + &dpn[i].max_word); + fwnode_property_read_u32(node, "mipi-sdw-port-min-wordlength", + &dpn[i].min_word); + + nval = fwnode_property_read_u32_array(node, + "mipi-sdw-port-wordlength-configs", NULL, 0); + if (nval > 0) { + + dpn[i].num_words = nval; + dpn[i].words = devm_kcalloc(&slave->dev, + dpn[i].num_words, + sizeof(*dpn[i].words), GFP_KERNEL); + if (!dpn[i].words) + return -ENOMEM; + + fwnode_property_read_u32_array(node, + "mipi-sdw-port-wordlength-configs", + dpn[i].words, dpn[i].num_words); + } + + fwnode_property_read_u32(node, "mipi-sdw-data-port-type", + &dpn[i].type); + + fwnode_property_read_u32(node, + "mipi-sdw-max-grouping-supported", + &dpn[i].max_grouping); + + dpn[i].simple_ch_prep_sm = fwnode_property_read_bool(node, + "mipi-sdw-simplified-channelprepare-sm"); + + fwnode_property_read_u32(node, + "mipi-sdw-port-channelprepare-timeout", + &dpn[i].ch_prep_timeout); + + fwnode_property_read_u32(node, + "mipi-sdw-imp-def-dpn-interrupts-supported", + &dpn[i].device_interrupts); + + fwnode_property_read_u32(node, "mipi-sdw-min-channel-number", + &dpn[i].min_ch); + + fwnode_property_read_u32(node, "mipi-sdw-max-channel-number", + &dpn[i].max_ch); + + nval = fwnode_property_read_u32_array(node, + "mipi-sdw-channel-number-list", NULL, 0); + if (nval > 0) { + + dpn[i].num_ch = nval; + dpn[i].ch = devm_kcalloc(&slave->dev, dpn[i].num_ch, + sizeof(*dpn[i].ch), GFP_KERNEL); + if (!dpn[i].ch) + return -ENOMEM; + + fwnode_property_read_u32_array(node, + "mipi-sdw-channel-number-list", + dpn[i].ch, dpn[i].num_ch); + } + + nval = fwnode_property_read_u32_array(node, + "mipi-sdw-channel-combination-list", NULL, 0); + if (nval > 0) { + + dpn[i].num_ch_combinations = nval; + dpn[i].ch_combinations = devm_kcalloc(&slave->dev, + dpn[i].num_ch_combinations, + sizeof(*dpn[i].ch_combinations), + GFP_KERNEL); + if (!dpn[i].ch_combinations) + return -ENOMEM; + + fwnode_property_read_u32_array(node, + "mipi-sdw-channel-combination-list", + dpn[i].ch_combinations, + dpn[i].num_ch_combinations); + } + + fwnode_property_read_u32(node, + "mipi-sdw-modes-supported", &dpn[i].modes); + + fwnode_property_read_u32(node, "mipi-sdw-max-async-buffer", + &dpn[i].max_async_buffer); + + dpn[i].block_pack_mode = fwnode_property_read_bool(node, + "mipi-sdw-block-packing-mode"); + + fwnode_property_read_u32(node, "mipi-sdw-port-encoding-type", + &dpn[i].port_encoding); + + /* TODO: Read audio mode */ + + i++; + } + + return 0; +} + +/** + * sdw_slave_read_prop() - Read Slave properties + * @slave: SDW Slave + */ +int sdw_slave_read_prop(struct sdw_slave *slave) +{ + struct sdw_slave_prop *prop = &slave->prop; + struct device *dev = &slave->dev; + struct fwnode_handle *port; + int num_of_ports, nval, i, dp0 = 0; + + device_property_read_u32(dev, "mipi-sdw-sw-interface-revision", + &prop->mipi_revision); + + prop->wake_capable = device_property_read_bool(dev, + "mipi-sdw-wake-up-unavailable"); + prop->wake_capable = !prop->wake_capable; + + prop->test_mode_capable = device_property_read_bool(dev, + "mipi-sdw-test-mode-supported"); + + prop->clk_stop_mode1 = false; + if (device_property_read_bool(dev, + "mipi-sdw-clock-stop-mode1-supported")) + prop->clk_stop_mode1 = true; + + prop->simple_clk_stop_capable = device_property_read_bool(dev, + "mipi-sdw-simplified-clockstopprepare-sm-supported"); + + device_property_read_u32(dev, "mipi-sdw-clockstopprepare-timeout", + &prop->clk_stop_timeout); + + device_property_read_u32(dev, "mipi-sdw-slave-channelprepare-timeout", + &prop->ch_prep_timeout); + + device_property_read_u32(dev, + "mipi-sdw-clockstopprepare-hard-reset-behavior", + &prop->reset_behave); + + prop->high_PHY_capable = device_property_read_bool(dev, + "mipi-sdw-highPHY-capable"); + + prop->paging_support = device_property_read_bool(dev, + "mipi-sdw-paging-support"); + + prop->bank_delay_support = device_property_read_bool(dev, + "mipi-sdw-bank-delay-support"); + + device_property_read_u32(dev, + "mipi-sdw-port15-read-behavior", &prop->p15_behave); + + device_property_read_u32(dev, "mipi-sdw-master-count", + &prop->master_count); + + device_property_read_u32(dev, "mipi-sdw-source-port-list", + &prop->source_ports); + + device_property_read_u32(dev, "mipi-sdw-sink-port-list", + &prop->sink_ports); + + /* Read dp0 properties */ + port = device_get_named_child_node(dev, "mipi-sdw-dp-0-subproperties"); + if (!port) { + dev_dbg(dev, "DP0 node not found!!\n"); + } else { + + prop->dp0_prop = devm_kzalloc(&slave->dev, + sizeof(*prop->dp0_prop), GFP_KERNEL); + if (!prop->dp0_prop) + return -ENOMEM; + + sdw_slave_read_dp0(slave, port, prop->dp0_prop); + dp0 = 1; + } + + /* + * Based on each DPn port, get source and sink dpn properties. + * Also, some ports can operate as both source or sink. + */ + + /* Allocate memory for set bits in port lists */ + nval = hweight32(prop->source_ports); + prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->src_dpn_prop), GFP_KERNEL); + if (!prop->src_dpn_prop) + return -ENOMEM; + + /* Read dpn properties for source port(s) */ + sdw_slave_read_dpn(slave, prop->src_dpn_prop, nval, + prop->source_ports, "source"); + + nval = hweight32(prop->sink_ports); + prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval, + sizeof(*prop->sink_dpn_prop), GFP_KERNEL); + if (!prop->sink_dpn_prop) + return -ENOMEM; + + /* Read dpn properties for sink port(s) */ + sdw_slave_read_dpn(slave, prop->sink_dpn_prop, nval, + prop->sink_ports, "sink"); + + /* some ports are bidirectional so check total ports by ORing */ + nval = prop->source_ports | prop->sink_ports; + num_of_ports = hweight32(nval) + dp0; /* add DP0 */ + + /* Allocate port_ready based on num_of_ports */ + slave->port_ready = devm_kcalloc(&slave->dev, num_of_ports, + sizeof(*slave->port_ready), GFP_KERNEL); + if (!slave->port_ready) + return -ENOMEM; + + /* Initialize completion */ + for (i = 0; i < num_of_ports; i++) + init_completion(&slave->port_ready[i]); + + return 0; +} +EXPORT_SYMBOL(sdw_slave_read_prop); diff --git a/drivers/soundwire/slave.c b/drivers/soundwire/slave.c new file mode 100644 index 000000000000..ac103bd0c176 --- /dev/null +++ b/drivers/soundwire/slave.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#include +#include +#include +#include "bus.h" + +static void sdw_slave_release(struct device *dev) +{ + struct sdw_slave *slave = dev_to_sdw_dev(dev); + + kfree(slave); +} + +static int sdw_slave_add(struct sdw_bus *bus, + struct sdw_slave_id *id, struct fwnode_handle *fwnode) +{ + struct sdw_slave *slave; + int ret; + + slave = kzalloc(sizeof(*slave), GFP_KERNEL); + if (!slave) + return -ENOMEM; + + /* Initialize data structure */ + memcpy(&slave->id, id, sizeof(*id)); + slave->dev.parent = bus->dev; + slave->dev.fwnode = fwnode; + + /* name shall be sdw:link:mfg:part:class:unique */ + dev_set_name(&slave->dev, "sdw:%x:%x:%x:%x:%x", + bus->link_id, id->mfg_id, id->part_id, + id->class_id, id->unique_id); + + slave->dev.release = sdw_slave_release; + slave->dev.bus = &sdw_bus_type; + slave->bus = bus; + slave->status = SDW_SLAVE_UNATTACHED; + slave->dev_num = 0; + + mutex_lock(&bus->bus_lock); + list_add_tail(&slave->node, &bus->slaves); + mutex_unlock(&bus->bus_lock); + + ret = device_register(&slave->dev); + if (ret) { + dev_err(bus->dev, "Failed to add slave: ret %d\n", ret); + + /* + * On err, don't free but drop ref as this will be freed + * when release method is invoked. + */ + mutex_lock(&bus->bus_lock); + list_del(&slave->node); + mutex_unlock(&bus->bus_lock); + put_device(&slave->dev); + } + + return ret; +} + +#if IS_ENABLED(CONFIG_ACPI) +/* + * sdw_acpi_find_slaves() - Find Slave devices in Master ACPI node + * @bus: SDW bus instance + * + * Scans Master ACPI node for SDW child Slave devices and registers it. + */ +int sdw_acpi_find_slaves(struct sdw_bus *bus) +{ + struct acpi_device *adev, *parent; + + parent = ACPI_COMPANION(bus->dev); + if (!parent) { + dev_err(bus->dev, "Can't find parent for acpi bind\n"); + return -ENODEV; + } + + list_for_each_entry(adev, &parent->children, node) { + unsigned long long addr; + struct sdw_slave_id id; + unsigned int link_id; + acpi_status status; + + status = acpi_evaluate_integer(adev->handle, + METHOD_NAME__ADR, NULL, &addr); + + if (ACPI_FAILURE(status)) { + dev_err(bus->dev, "_ADR resolution failed: %x\n", + status); + return status; + } + + /* Extract link id from ADR, Bit 51 to 48 (included) */ + link_id = (addr >> 48) & GENMASK(3, 0); + + /* Check for link_id match */ + if (link_id != bus->link_id) + continue; + + sdw_extract_slave_id(bus, addr, &id); + + /* + * don't error check for sdw_slave_add as we want to continue + * adding Slaves + */ + sdw_slave_add(bus, &id, acpi_fwnode_handle(adev)); + } + + return 0; +} + +#endif diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c index 48d5327d38d4..8ca549032c27 100644 --- a/drivers/uio/uio_hv_generic.c +++ b/drivers/uio/uio_hv_generic.c @@ -10,11 +10,13 @@ * Since the driver does not declare any device ids, you must allocate * id and bind the device to the driver yourself. For example: * + * Associate Network GUID with UIO device * # echo "f8615163-df3e-46c5-913f-f2d2f965ed0e" \ - * > /sys/bus/vmbus/drivers/uio_hv_generic - * # echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 \ + * > /sys/bus/vmbus/drivers/uio_hv_generic/new_id + * Then rebind + * # echo -n "ed963694-e847-4b2a-85af-bc9cfc11d6f3" \ * > /sys/bus/vmbus/drivers/hv_netvsc/unbind - * # echo -n vmbus-ed963694-e847-4b2a-85af-bc9cfc11d6f3 \ + * # echo -n "ed963694-e847-4b2a-85af-bc9cfc11d6f3" \ * > /sys/bus/vmbus/drivers/uio_hv_generic/bind */ @@ -37,6 +39,10 @@ #define DRIVER_AUTHOR "Stephen Hemminger " #define DRIVER_DESC "Generic UIO driver for VMBus devices" +#define HV_RING_SIZE 512 /* pages */ +#define SEND_BUFFER_SIZE (15 * 1024 * 1024) +#define RECV_BUFFER_SIZE (15 * 1024 * 1024) + /* * List of resources to be mapped to user space * can be extended up to MAX_UIO_MAPS(5) items @@ -45,33 +51,23 @@ enum hv_uio_map { TXRX_RING_MAP = 0, INT_PAGE_MAP, MON_PAGE_MAP, + RECV_BUF_MAP, + SEND_BUF_MAP }; -#define HV_RING_SIZE 512 - struct hv_uio_private_data { struct uio_info info; struct hv_device *device; + + void *recv_buf; + u32 recv_gpadl; + char recv_name[32]; /* "recv_4294967295" */ + + void *send_buf; + u32 send_gpadl; + char send_name[32]; }; -static int -hv_uio_mmap(struct uio_info *info, struct vm_area_struct *vma) -{ - int mi; - - if (vma->vm_pgoff >= MAX_UIO_MAPS) - return -EINVAL; - - if (info->mem[vma->vm_pgoff].size == 0) - return -EINVAL; - - mi = (int)vma->vm_pgoff; - - return remap_pfn_range(vma, vma->vm_start, - info->mem[mi].addr >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot); -} - /* * This is the irqcontrol callback to be registered to uio_info. * It can be used to disable/enable interrupt from user space processes. @@ -107,6 +103,36 @@ static void hv_uio_channel_cb(void *context) uio_event_notify(&pdata->info); } +/* + * Callback from vmbus_event when channel is rescinded. + */ +static void hv_uio_rescind(struct vmbus_channel *channel) +{ + struct hv_device *hv_dev = channel->primary_channel->device_obj; + struct hv_uio_private_data *pdata = hv_get_drvdata(hv_dev); + + /* + * Turn off the interrupt file handle + * Next read for event will return -EIO + */ + pdata->info.irq = 0; + + /* Wake up reader */ + uio_event_notify(&pdata->info); +} + +static void +hv_uio_cleanup(struct hv_device *dev, struct hv_uio_private_data *pdata) +{ + if (pdata->send_gpadl) + vmbus_teardown_gpadl(dev->channel, pdata->send_gpadl); + vfree(pdata->send_buf); + + if (pdata->recv_gpadl) + vmbus_teardown_gpadl(dev->channel, pdata->recv_gpadl); + vfree(pdata->recv_buf); +} + static int hv_uio_probe(struct hv_device *dev, const struct hv_vmbus_device_id *dev_id) @@ -124,36 +150,82 @@ hv_uio_probe(struct hv_device *dev, if (ret) goto fail; + /* Communicating with host has to be via shared memory not hypercall */ + if (!dev->channel->offermsg.monitor_allocated) { + dev_err(&dev->device, "vmbus channel requires hypercall\n"); + ret = -ENOTSUPP; + goto fail_close; + } + dev->channel->inbound.ring_buffer->interrupt_mask = 1; - set_channel_read_mode(dev->channel, HV_CALL_DIRECT); + set_channel_read_mode(dev->channel, HV_CALL_ISR); /* Fill general uio info */ pdata->info.name = "uio_hv_generic"; pdata->info.version = DRIVER_VERSION; pdata->info.irqcontrol = hv_uio_irqcontrol; - pdata->info.mmap = hv_uio_mmap; pdata->info.irq = UIO_IRQ_CUSTOM; /* mem resources */ pdata->info.mem[TXRX_RING_MAP].name = "txrx_rings"; pdata->info.mem[TXRX_RING_MAP].addr - = virt_to_phys(dev->channel->ringbuffer_pages); + = (uintptr_t)dev->channel->ringbuffer_pages; pdata->info.mem[TXRX_RING_MAP].size - = dev->channel->ringbuffer_pagecount * PAGE_SIZE; + = dev->channel->ringbuffer_pagecount << PAGE_SHIFT; pdata->info.mem[TXRX_RING_MAP].memtype = UIO_MEM_LOGICAL; pdata->info.mem[INT_PAGE_MAP].name = "int_page"; - pdata->info.mem[INT_PAGE_MAP].addr = - virt_to_phys(vmbus_connection.int_page); + pdata->info.mem[INT_PAGE_MAP].addr + = (uintptr_t)vmbus_connection.int_page; pdata->info.mem[INT_PAGE_MAP].size = PAGE_SIZE; pdata->info.mem[INT_PAGE_MAP].memtype = UIO_MEM_LOGICAL; - pdata->info.mem[MON_PAGE_MAP].name = "monitor_pages"; - pdata->info.mem[MON_PAGE_MAP].addr = - virt_to_phys(vmbus_connection.monitor_pages[1]); + pdata->info.mem[MON_PAGE_MAP].name = "monitor_page"; + pdata->info.mem[MON_PAGE_MAP].addr + = (uintptr_t)vmbus_connection.monitor_pages[1]; pdata->info.mem[MON_PAGE_MAP].size = PAGE_SIZE; pdata->info.mem[MON_PAGE_MAP].memtype = UIO_MEM_LOGICAL; + pdata->recv_buf = vzalloc(RECV_BUFFER_SIZE); + if (pdata->recv_buf == NULL) { + ret = -ENOMEM; + goto fail_close; + } + + ret = vmbus_establish_gpadl(dev->channel, pdata->recv_buf, + RECV_BUFFER_SIZE, &pdata->recv_gpadl); + if (ret) + goto fail_close; + + /* put Global Physical Address Label in name */ + snprintf(pdata->recv_name, sizeof(pdata->recv_name), + "recv:%u", pdata->recv_gpadl); + pdata->info.mem[RECV_BUF_MAP].name = pdata->recv_name; + pdata->info.mem[RECV_BUF_MAP].addr + = (uintptr_t)pdata->recv_buf; + pdata->info.mem[RECV_BUF_MAP].size = RECV_BUFFER_SIZE; + pdata->info.mem[RECV_BUF_MAP].memtype = UIO_MEM_VIRTUAL; + + + pdata->send_buf = vzalloc(SEND_BUFFER_SIZE); + if (pdata->send_buf == NULL) { + ret = -ENOMEM; + goto fail_close; + } + + ret = vmbus_establish_gpadl(dev->channel, pdata->send_buf, + SEND_BUFFER_SIZE, &pdata->send_gpadl); + if (ret) + goto fail_close; + + snprintf(pdata->send_name, sizeof(pdata->send_name), + "send:%u", pdata->send_gpadl); + pdata->info.mem[SEND_BUF_MAP].name = pdata->send_name; + pdata->info.mem[SEND_BUF_MAP].addr + = (uintptr_t)pdata->send_buf; + pdata->info.mem[SEND_BUF_MAP].size = SEND_BUFFER_SIZE; + pdata->info.mem[SEND_BUF_MAP].memtype = UIO_MEM_VIRTUAL; + pdata->info.priv = pdata; pdata->device = dev; @@ -163,11 +235,14 @@ hv_uio_probe(struct hv_device *dev, goto fail_close; } + vmbus_set_chn_rescind_callback(dev->channel, hv_uio_rescind); + hv_set_drvdata(dev, pdata); return 0; fail_close: + hv_uio_cleanup(dev, pdata); vmbus_close(dev->channel); fail: kfree(pdata); @@ -184,6 +259,7 @@ hv_uio_remove(struct hv_device *dev) return 0; uio_unregister_device(&pdata->info); + hv_uio_cleanup(dev, pdata); hv_set_drvdata(dev, NULL); vmbus_close(dev->channel); kfree(pdata); diff --git a/drivers/virt/Kconfig b/drivers/virt/Kconfig index 99ebdde590f8..8d9cdfbd6bcc 100644 --- a/drivers/virt/Kconfig +++ b/drivers/virt/Kconfig @@ -30,4 +30,5 @@ config FSL_HV_MANAGER 4) A kernel interface for receiving callbacks when a managed partition shuts down. +source "drivers/virt/vboxguest/Kconfig" endif diff --git a/drivers/virt/Makefile b/drivers/virt/Makefile index c47f04dd343b..d3f7b2540890 100644 --- a/drivers/virt/Makefile +++ b/drivers/virt/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_FSL_HV_MANAGER) += fsl_hypervisor.o +obj-y += vboxguest/ diff --git a/drivers/virt/vboxguest/Kconfig b/drivers/virt/vboxguest/Kconfig new file mode 100644 index 000000000000..fffd318a10fe --- /dev/null +++ b/drivers/virt/vboxguest/Kconfig @@ -0,0 +1,18 @@ +config VBOXGUEST + tristate "Virtual Box Guest integration support" + depends on X86 && PCI && INPUT + help + This is a driver for the Virtual Box Guest PCI device used in + Virtual Box virtual machines. Enabling this driver will add + support for Virtual Box Guest integration features such as + copy-and-paste, seamless mode and OpenGL pass-through. + + This driver also offers vboxguest IPC functionality which is needed + for the vboxfs driver which offers folder sharing support. + + If you enable this driver you should also enable the VBOXVIDEO option. + + Although it is possible to build this module in, it is advised + to build this driver as a module, so that it can be updated + independently of the kernel. Select M to build this driver as a + module. diff --git a/drivers/virt/vboxguest/Makefile b/drivers/virt/vboxguest/Makefile new file mode 100644 index 000000000000..203b8f465817 --- /dev/null +++ b/drivers/virt/vboxguest/Makefile @@ -0,0 +1,3 @@ +vboxguest-y := vboxguest_linux.o vboxguest_core.o vboxguest_utils.o + +obj-$(CONFIG_VBOXGUEST) += vboxguest.o diff --git a/drivers/virt/vboxguest/vboxguest_core.c b/drivers/virt/vboxguest/vboxguest_core.c new file mode 100644 index 000000000000..190dbf8cfcb5 --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_core.c @@ -0,0 +1,1571 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * vboxguest core guest-device handling code, VBoxGuest.cpp in upstream svn. + * + * Copyright (C) 2007-2016 Oracle Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "vboxguest_core.h" +#include "vboxguest_version.h" + +/* Get the pointer to the first HGCM parameter. */ +#define VBG_IOCTL_HGCM_CALL_PARMS(a) \ + ((struct vmmdev_hgcm_function_parameter *)( \ + (u8 *)(a) + sizeof(struct vbg_ioctl_hgcm_call))) +/* Get the pointer to the first HGCM parameter in a 32-bit request. */ +#define VBG_IOCTL_HGCM_CALL_PARMS32(a) \ + ((struct vmmdev_hgcm_function_parameter32 *)( \ + (u8 *)(a) + sizeof(struct vbg_ioctl_hgcm_call))) + +#define GUEST_MAPPINGS_TRIES 5 + +/** + * Reserves memory in which the VMM can relocate any guest mappings + * that are floating around. + * + * This operation is a little bit tricky since the VMM might not accept + * just any address because of address clashes between the three contexts + * it operates in, so we try several times. + * + * Failure to reserve the guest mappings is ignored. + * + * @gdev: The Guest extension device. + */ +static void vbg_guest_mappings_init(struct vbg_dev *gdev) +{ + struct vmmdev_hypervisorinfo *req; + void *guest_mappings[GUEST_MAPPINGS_TRIES]; + struct page **pages = NULL; + u32 size, hypervisor_size; + int i, rc; + + /* Query the required space. */ + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_GET_HYPERVISOR_INFO); + if (!req) + return; + + req->hypervisor_start = 0; + req->hypervisor_size = 0; + rc = vbg_req_perform(gdev, req); + if (rc < 0) + goto out; + + /* + * The VMM will report back if there is nothing it wants to map, like + * for instance in VT-x and AMD-V mode. + */ + if (req->hypervisor_size == 0) + goto out; + + hypervisor_size = req->hypervisor_size; + /* Add 4M so that we can align the vmap to 4MiB as the host requires. */ + size = PAGE_ALIGN(req->hypervisor_size) + SZ_4M; + + pages = kmalloc(sizeof(*pages) * (size >> PAGE_SHIFT), GFP_KERNEL); + if (!pages) + goto out; + + gdev->guest_mappings_dummy_page = alloc_page(GFP_HIGHUSER); + if (!gdev->guest_mappings_dummy_page) + goto out; + + for (i = 0; i < (size >> PAGE_SHIFT); i++) + pages[i] = gdev->guest_mappings_dummy_page; + + /* + * Try several times, the VMM might not accept some addresses because + * of address clashes between the three contexts. + */ + for (i = 0; i < GUEST_MAPPINGS_TRIES; i++) { + guest_mappings[i] = vmap(pages, (size >> PAGE_SHIFT), + VM_MAP, PAGE_KERNEL_RO); + if (!guest_mappings[i]) + break; + + req->header.request_type = VMMDEVREQ_SET_HYPERVISOR_INFO; + req->header.rc = VERR_INTERNAL_ERROR; + req->hypervisor_size = hypervisor_size; + req->hypervisor_start = + (unsigned long)PTR_ALIGN(guest_mappings[i], SZ_4M); + + rc = vbg_req_perform(gdev, req); + if (rc >= 0) { + gdev->guest_mappings = guest_mappings[i]; + break; + } + } + + /* Free vmap's from failed attempts. */ + while (--i >= 0) + vunmap(guest_mappings[i]); + + /* On failure free the dummy-page backing the vmap */ + if (!gdev->guest_mappings) { + __free_page(gdev->guest_mappings_dummy_page); + gdev->guest_mappings_dummy_page = NULL; + } + +out: + kfree(req); + kfree(pages); +} + +/** + * Undo what vbg_guest_mappings_init did. + * + * @gdev: The Guest extension device. + */ +static void vbg_guest_mappings_exit(struct vbg_dev *gdev) +{ + struct vmmdev_hypervisorinfo *req; + int rc; + + if (!gdev->guest_mappings) + return; + + /* + * Tell the host that we're going to free the memory we reserved for + * it, the free it up. (Leak the memory if anything goes wrong here.) + */ + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_HYPERVISOR_INFO); + if (!req) + return; + + req->hypervisor_start = 0; + req->hypervisor_size = 0; + + rc = vbg_req_perform(gdev, req); + + kfree(req); + + if (rc < 0) { + vbg_err("%s error: %d\n", __func__, rc); + return; + } + + vunmap(gdev->guest_mappings); + gdev->guest_mappings = NULL; + + __free_page(gdev->guest_mappings_dummy_page); + gdev->guest_mappings_dummy_page = NULL; +} + +/** + * Report the guest information to the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + */ +static int vbg_report_guest_info(struct vbg_dev *gdev) +{ + /* + * Allocate and fill in the two guest info reports. + */ + struct vmmdev_guest_info *req1 = NULL; + struct vmmdev_guest_info2 *req2 = NULL; + int rc, ret = -ENOMEM; + + req1 = vbg_req_alloc(sizeof(*req1), VMMDEVREQ_REPORT_GUEST_INFO); + req2 = vbg_req_alloc(sizeof(*req2), VMMDEVREQ_REPORT_GUEST_INFO2); + if (!req1 || !req2) + goto out_free; + + req1->interface_version = VMMDEV_VERSION; + req1->os_type = VMMDEV_OSTYPE_LINUX26; +#if __BITS_PER_LONG == 64 + req1->os_type |= VMMDEV_OSTYPE_X64; +#endif + + req2->additions_major = VBG_VERSION_MAJOR; + req2->additions_minor = VBG_VERSION_MINOR; + req2->additions_build = VBG_VERSION_BUILD; + req2->additions_revision = VBG_SVN_REV; + /* (no features defined yet) */ + req2->additions_features = 0; + strlcpy(req2->name, VBG_VERSION_STRING, + sizeof(req2->name)); + + /* + * There are two protocols here: + * 1. INFO2 + INFO1. Supported by >=3.2.51. + * 2. INFO1 and optionally INFO2. The old protocol. + * + * We try protocol 2 first. It will fail with VERR_NOT_SUPPORTED + * if not supported by the VMMDev (message ordering requirement). + */ + rc = vbg_req_perform(gdev, req2); + if (rc >= 0) { + rc = vbg_req_perform(gdev, req1); + } else if (rc == VERR_NOT_SUPPORTED || rc == VERR_NOT_IMPLEMENTED) { + rc = vbg_req_perform(gdev, req1); + if (rc >= 0) { + rc = vbg_req_perform(gdev, req2); + if (rc == VERR_NOT_IMPLEMENTED) + rc = VINF_SUCCESS; + } + } + ret = vbg_status_code_to_errno(rc); + +out_free: + kfree(req2); + kfree(req1); + return ret; +} + +/** + * Report the guest driver status to the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @active: Flag whether the driver is now active or not. + */ +static int vbg_report_driver_status(struct vbg_dev *gdev, bool active) +{ + struct vmmdev_guest_status *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_REPORT_GUEST_STATUS); + if (!req) + return -ENOMEM; + + req->facility = VBOXGUEST_FACILITY_TYPE_VBOXGUEST_DRIVER; + if (active) + req->status = VBOXGUEST_FACILITY_STATUS_ACTIVE; + else + req->status = VBOXGUEST_FACILITY_STATUS_INACTIVE; + req->flags = 0; + + rc = vbg_req_perform(gdev, req); + if (rc == VERR_NOT_IMPLEMENTED) /* Compatibility with older hosts. */ + rc = VINF_SUCCESS; + + kfree(req); + + return vbg_status_code_to_errno(rc); +} + +/** + * Inflate the balloon by one chunk. The caller owns the balloon mutex. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @chunk_idx: Index of the chunk. + */ +static int vbg_balloon_inflate(struct vbg_dev *gdev, u32 chunk_idx) +{ + struct vmmdev_memballoon_change *req = gdev->mem_balloon.change_req; + struct page **pages; + int i, rc, ret; + + pages = kmalloc(sizeof(*pages) * VMMDEV_MEMORY_BALLOON_CHUNK_PAGES, + GFP_KERNEL | __GFP_NOWARN); + if (!pages) + return -ENOMEM; + + req->header.size = sizeof(*req); + req->inflate = true; + req->pages = VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; + + for (i = 0; i < VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; i++) { + pages[i] = alloc_page(GFP_KERNEL | __GFP_NOWARN); + if (!pages[i]) { + ret = -ENOMEM; + goto out_error; + } + + req->phys_page[i] = page_to_phys(pages[i]); + } + + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + vbg_err("%s error, rc: %d\n", __func__, rc); + ret = vbg_status_code_to_errno(rc); + goto out_error; + } + + gdev->mem_balloon.pages[chunk_idx] = pages; + + return 0; + +out_error: + while (--i >= 0) + __free_page(pages[i]); + kfree(pages); + + return ret; +} + +/** + * Deflate the balloon by one chunk. The caller owns the balloon mutex. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @chunk_idx: Index of the chunk. + */ +static int vbg_balloon_deflate(struct vbg_dev *gdev, u32 chunk_idx) +{ + struct vmmdev_memballoon_change *req = gdev->mem_balloon.change_req; + struct page **pages = gdev->mem_balloon.pages[chunk_idx]; + int i, rc; + + req->header.size = sizeof(*req); + req->inflate = false; + req->pages = VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; + + for (i = 0; i < VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; i++) + req->phys_page[i] = page_to_phys(pages[i]); + + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + vbg_err("%s error, rc: %d\n", __func__, rc); + return vbg_status_code_to_errno(rc); + } + + for (i = 0; i < VMMDEV_MEMORY_BALLOON_CHUNK_PAGES; i++) + __free_page(pages[i]); + kfree(pages); + gdev->mem_balloon.pages[chunk_idx] = NULL; + + return 0; +} + +/** + * Respond to VMMDEV_EVENT_BALLOON_CHANGE_REQUEST events, query the size + * the host wants the balloon to be and adjust accordingly. + */ +static void vbg_balloon_work(struct work_struct *work) +{ + struct vbg_dev *gdev = + container_of(work, struct vbg_dev, mem_balloon.work); + struct vmmdev_memballoon_info *req = gdev->mem_balloon.get_req; + u32 i, chunks; + int rc, ret; + + /* + * Setting this bit means that we request the value from the host and + * change the guest memory balloon according to the returned value. + */ + req->event_ack = VMMDEV_EVENT_BALLOON_CHANGE_REQUEST; + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + vbg_err("%s error, rc: %d)\n", __func__, rc); + return; + } + + /* + * The host always returns the same maximum amount of chunks, so + * we do this once. + */ + if (!gdev->mem_balloon.max_chunks) { + gdev->mem_balloon.pages = + devm_kcalloc(gdev->dev, req->phys_mem_chunks, + sizeof(struct page **), GFP_KERNEL); + if (!gdev->mem_balloon.pages) + return; + + gdev->mem_balloon.max_chunks = req->phys_mem_chunks; + } + + chunks = req->balloon_chunks; + if (chunks > gdev->mem_balloon.max_chunks) { + vbg_err("%s: illegal balloon size %u (max=%u)\n", + __func__, chunks, gdev->mem_balloon.max_chunks); + return; + } + + if (chunks > gdev->mem_balloon.chunks) { + /* inflate */ + for (i = gdev->mem_balloon.chunks; i < chunks; i++) { + ret = vbg_balloon_inflate(gdev, i); + if (ret < 0) + return; + + gdev->mem_balloon.chunks++; + } + } else { + /* deflate */ + for (i = gdev->mem_balloon.chunks; i-- > chunks;) { + ret = vbg_balloon_deflate(gdev, i); + if (ret < 0) + return; + + gdev->mem_balloon.chunks--; + } + } +} + +/** + * Callback for heartbeat timer. + */ +static void vbg_heartbeat_timer(struct timer_list *t) +{ + struct vbg_dev *gdev = from_timer(gdev, t, heartbeat_timer); + + vbg_req_perform(gdev, gdev->guest_heartbeat_req); + mod_timer(&gdev->heartbeat_timer, + msecs_to_jiffies(gdev->heartbeat_interval_ms)); +} + +/** + * Configure the host to check guest's heartbeat + * and get heartbeat interval from the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @enabled: Set true to enable guest heartbeat checks on host. + */ +static int vbg_heartbeat_host_config(struct vbg_dev *gdev, bool enabled) +{ + struct vmmdev_heartbeat *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_HEARTBEAT_CONFIGURE); + if (!req) + return -ENOMEM; + + req->enabled = enabled; + req->interval_ns = 0; + rc = vbg_req_perform(gdev, req); + do_div(req->interval_ns, 1000000); /* ns -> ms */ + gdev->heartbeat_interval_ms = req->interval_ns; + kfree(req); + + return vbg_status_code_to_errno(rc); +} + +/** + * Initializes the heartbeat timer. This feature may be disabled by the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + */ +static int vbg_heartbeat_init(struct vbg_dev *gdev) +{ + int ret; + + /* Make sure that heartbeat checking is disabled if we fail. */ + ret = vbg_heartbeat_host_config(gdev, false); + if (ret < 0) + return ret; + + ret = vbg_heartbeat_host_config(gdev, true); + if (ret < 0) + return ret; + + /* + * Preallocate the request to use it from the timer callback because: + * 1) on Windows vbg_req_alloc must be called at IRQL <= APC_LEVEL + * and the timer callback runs at DISPATCH_LEVEL; + * 2) avoid repeated allocations. + */ + gdev->guest_heartbeat_req = vbg_req_alloc( + sizeof(*gdev->guest_heartbeat_req), + VMMDEVREQ_GUEST_HEARTBEAT); + if (!gdev->guest_heartbeat_req) + return -ENOMEM; + + vbg_info("%s: Setting up heartbeat to trigger every %d milliseconds\n", + __func__, gdev->heartbeat_interval_ms); + mod_timer(&gdev->heartbeat_timer, 0); + + return 0; +} + +/** + * Cleanup hearbeat code, stop HB timer and disable host heartbeat checking. + * @gdev: The Guest extension device. + */ +static void vbg_heartbeat_exit(struct vbg_dev *gdev) +{ + del_timer_sync(&gdev->heartbeat_timer); + vbg_heartbeat_host_config(gdev, false); + kfree(gdev->guest_heartbeat_req); + +} + +/** + * Applies a change to the bit usage tracker. + * Return: true if the mask changed, false if not. + * @tracker: The bit usage tracker. + * @changed: The bits to change. + * @previous: The previous value of the bits. + */ +static bool vbg_track_bit_usage(struct vbg_bit_usage_tracker *tracker, + u32 changed, u32 previous) +{ + bool global_change = false; + + while (changed) { + u32 bit = ffs(changed) - 1; + u32 bitmask = BIT(bit); + + if (bitmask & previous) { + tracker->per_bit_usage[bit] -= 1; + if (tracker->per_bit_usage[bit] == 0) { + global_change = true; + tracker->mask &= ~bitmask; + } + } else { + tracker->per_bit_usage[bit] += 1; + if (tracker->per_bit_usage[bit] == 1) { + global_change = true; + tracker->mask |= bitmask; + } + } + + changed &= ~bitmask; + } + + return global_change; +} + +/** + * Init and termination worker for resetting the (host) event filter on the host + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @fixed_events: Fixed events (init time). + */ +static int vbg_reset_host_event_filter(struct vbg_dev *gdev, + u32 fixed_events) +{ + struct vmmdev_mask *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_CTL_GUEST_FILTER_MASK); + if (!req) + return -ENOMEM; + + req->not_mask = U32_MAX & ~fixed_events; + req->or_mask = fixed_events; + rc = vbg_req_perform(gdev, req); + if (rc < 0) + vbg_err("%s error, rc: %d\n", __func__, rc); + + kfree(req); + return vbg_status_code_to_errno(rc); +} + +/** + * Changes the event filter mask for the given session. + * + * This is called in response to VBG_IOCTL_CHANGE_FILTER_MASK as well as to + * do session cleanup. Takes the session spinlock. + * + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @session: The session. + * @or_mask: The events to add. + * @not_mask: The events to remove. + * @session_termination: Set if we're called by the session cleanup code. + * This tweaks the error handling so we perform + * proper session cleanup even if the host + * misbehaves. + */ +static int vbg_set_session_event_filter(struct vbg_dev *gdev, + struct vbg_session *session, + u32 or_mask, u32 not_mask, + bool session_termination) +{ + struct vmmdev_mask *req; + u32 changed, previous; + int rc, ret = 0; + + /* Allocate a request buffer before taking the spinlock */ + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_CTL_GUEST_FILTER_MASK); + if (!req) { + if (!session_termination) + return -ENOMEM; + /* Ignore allocation failure, we must do session cleanup. */ + } + + mutex_lock(&gdev->session_mutex); + + /* Apply the changes to the session mask. */ + previous = session->event_filter; + session->event_filter |= or_mask; + session->event_filter &= ~not_mask; + + /* If anything actually changed, update the global usage counters. */ + changed = previous ^ session->event_filter; + if (!changed) + goto out; + + vbg_track_bit_usage(&gdev->event_filter_tracker, changed, previous); + or_mask = gdev->fixed_events | gdev->event_filter_tracker.mask; + + if (gdev->event_filter_host == or_mask || !req) + goto out; + + gdev->event_filter_host = or_mask; + req->or_mask = or_mask; + req->not_mask = ~or_mask; + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + ret = vbg_status_code_to_errno(rc); + + /* Failed, roll back (unless it's session termination time). */ + gdev->event_filter_host = U32_MAX; + if (session_termination) + goto out; + + vbg_track_bit_usage(&gdev->event_filter_tracker, changed, + session->event_filter); + session->event_filter = previous; + } + +out: + mutex_unlock(&gdev->session_mutex); + kfree(req); + + return ret; +} + +/** + * Init and termination worker for set guest capabilities to zero on the host. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + */ +static int vbg_reset_host_capabilities(struct vbg_dev *gdev) +{ + struct vmmdev_mask *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_GUEST_CAPABILITIES); + if (!req) + return -ENOMEM; + + req->not_mask = U32_MAX; + req->or_mask = 0; + rc = vbg_req_perform(gdev, req); + if (rc < 0) + vbg_err("%s error, rc: %d\n", __func__, rc); + + kfree(req); + return vbg_status_code_to_errno(rc); +} + +/** + * Sets the guest capabilities for a session. Takes the session spinlock. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @session: The session. + * @or_mask: The capabilities to add. + * @not_mask: The capabilities to remove. + * @session_termination: Set if we're called by the session cleanup code. + * This tweaks the error handling so we perform + * proper session cleanup even if the host + * misbehaves. + */ +static int vbg_set_session_capabilities(struct vbg_dev *gdev, + struct vbg_session *session, + u32 or_mask, u32 not_mask, + bool session_termination) +{ + struct vmmdev_mask *req; + u32 changed, previous; + int rc, ret = 0; + + /* Allocate a request buffer before taking the spinlock */ + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_GUEST_CAPABILITIES); + if (!req) { + if (!session_termination) + return -ENOMEM; + /* Ignore allocation failure, we must do session cleanup. */ + } + + mutex_lock(&gdev->session_mutex); + + /* Apply the changes to the session mask. */ + previous = session->guest_caps; + session->guest_caps |= or_mask; + session->guest_caps &= ~not_mask; + + /* If anything actually changed, update the global usage counters. */ + changed = previous ^ session->guest_caps; + if (!changed) + goto out; + + vbg_track_bit_usage(&gdev->guest_caps_tracker, changed, previous); + or_mask = gdev->guest_caps_tracker.mask; + + if (gdev->guest_caps_host == or_mask || !req) + goto out; + + gdev->guest_caps_host = or_mask; + req->or_mask = or_mask; + req->not_mask = ~or_mask; + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + ret = vbg_status_code_to_errno(rc); + + /* Failed, roll back (unless it's session termination time). */ + gdev->guest_caps_host = U32_MAX; + if (session_termination) + goto out; + + vbg_track_bit_usage(&gdev->guest_caps_tracker, changed, + session->guest_caps); + session->guest_caps = previous; + } + +out: + mutex_unlock(&gdev->session_mutex); + kfree(req); + + return ret; +} + +/** + * vbg_query_host_version get the host feature mask and version information. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + */ +static int vbg_query_host_version(struct vbg_dev *gdev) +{ + struct vmmdev_host_version *req; + int rc, ret; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_GET_HOST_VERSION); + if (!req) + return -ENOMEM; + + rc = vbg_req_perform(gdev, req); + ret = vbg_status_code_to_errno(rc); + if (ret) + goto out; + + snprintf(gdev->host_version, sizeof(gdev->host_version), "%u.%u.%ur%u", + req->major, req->minor, req->build, req->revision); + gdev->host_features = req->features; + + vbg_info("vboxguest: host-version: %s %#x\n", gdev->host_version, + gdev->host_features); + + if (!(req->features & VMMDEV_HVF_HGCM_PHYS_PAGE_LIST)) { + vbg_err("vboxguest: Error host too old (does not support page-lists)\n"); + ret = -ENODEV; + } + +out: + kfree(req); + return ret; +} + +/** + * Initializes the VBoxGuest device extension when the + * device driver is loaded. + * + * The native code locates the VMMDev on the PCI bus and retrieve + * the MMIO and I/O port ranges, this function will take care of + * mapping the MMIO memory (if present). Upon successful return + * the native code should set up the interrupt handler. + * + * Return: 0 or negative errno value. + * + * @gdev: The Guest extension device. + * @fixed_events: Events that will be enabled upon init and no client + * will ever be allowed to mask. + */ +int vbg_core_init(struct vbg_dev *gdev, u32 fixed_events) +{ + int ret = -ENOMEM; + + gdev->fixed_events = fixed_events | VMMDEV_EVENT_HGCM; + gdev->event_filter_host = U32_MAX; /* forces a report */ + gdev->guest_caps_host = U32_MAX; /* forces a report */ + + init_waitqueue_head(&gdev->event_wq); + init_waitqueue_head(&gdev->hgcm_wq); + spin_lock_init(&gdev->event_spinlock); + mutex_init(&gdev->session_mutex); + mutex_init(&gdev->cancel_req_mutex); + timer_setup(&gdev->heartbeat_timer, vbg_heartbeat_timer, 0); + INIT_WORK(&gdev->mem_balloon.work, vbg_balloon_work); + + gdev->mem_balloon.get_req = + vbg_req_alloc(sizeof(*gdev->mem_balloon.get_req), + VMMDEVREQ_GET_MEMBALLOON_CHANGE_REQ); + gdev->mem_balloon.change_req = + vbg_req_alloc(sizeof(*gdev->mem_balloon.change_req), + VMMDEVREQ_CHANGE_MEMBALLOON); + gdev->cancel_req = + vbg_req_alloc(sizeof(*(gdev->cancel_req)), + VMMDEVREQ_HGCM_CANCEL2); + gdev->ack_events_req = + vbg_req_alloc(sizeof(*gdev->ack_events_req), + VMMDEVREQ_ACKNOWLEDGE_EVENTS); + gdev->mouse_status_req = + vbg_req_alloc(sizeof(*gdev->mouse_status_req), + VMMDEVREQ_GET_MOUSE_STATUS); + + if (!gdev->mem_balloon.get_req || !gdev->mem_balloon.change_req || + !gdev->cancel_req || !gdev->ack_events_req || + !gdev->mouse_status_req) + goto err_free_reqs; + + ret = vbg_query_host_version(gdev); + if (ret) + goto err_free_reqs; + + ret = vbg_report_guest_info(gdev); + if (ret) { + vbg_err("vboxguest: vbg_report_guest_info error: %d\n", ret); + goto err_free_reqs; + } + + ret = vbg_reset_host_event_filter(gdev, gdev->fixed_events); + if (ret) { + vbg_err("vboxguest: Error setting fixed event filter: %d\n", + ret); + goto err_free_reqs; + } + + ret = vbg_reset_host_capabilities(gdev); + if (ret) { + vbg_err("vboxguest: Error clearing guest capabilities: %d\n", + ret); + goto err_free_reqs; + } + + ret = vbg_core_set_mouse_status(gdev, 0); + if (ret) { + vbg_err("vboxguest: Error clearing mouse status: %d\n", ret); + goto err_free_reqs; + } + + /* These may fail without requiring the driver init to fail. */ + vbg_guest_mappings_init(gdev); + vbg_heartbeat_init(gdev); + + /* All Done! */ + ret = vbg_report_driver_status(gdev, true); + if (ret < 0) + vbg_err("vboxguest: Error reporting driver status: %d\n", ret); + + return 0; + +err_free_reqs: + kfree(gdev->mouse_status_req); + kfree(gdev->ack_events_req); + kfree(gdev->cancel_req); + kfree(gdev->mem_balloon.change_req); + kfree(gdev->mem_balloon.get_req); + return ret; +} + +/** + * Call this on exit to clean-up vboxguest-core managed resources. + * + * The native code should call this before the driver is loaded, + * but don't call this on shutdown. + * @gdev: The Guest extension device. + */ +void vbg_core_exit(struct vbg_dev *gdev) +{ + vbg_heartbeat_exit(gdev); + vbg_guest_mappings_exit(gdev); + + /* Clear the host flags (mouse status etc). */ + vbg_reset_host_event_filter(gdev, 0); + vbg_reset_host_capabilities(gdev); + vbg_core_set_mouse_status(gdev, 0); + + kfree(gdev->mouse_status_req); + kfree(gdev->ack_events_req); + kfree(gdev->cancel_req); + kfree(gdev->mem_balloon.change_req); + kfree(gdev->mem_balloon.get_req); +} + +/** + * Creates a VBoxGuest user session. + * + * vboxguest_linux.c calls this when userspace opens the char-device. + * Return: A pointer to the new session or an ERR_PTR on error. + * @gdev: The Guest extension device. + * @user: Set if this is a session for the vboxuser device. + */ +struct vbg_session *vbg_core_open_session(struct vbg_dev *gdev, bool user) +{ + struct vbg_session *session; + + session = kzalloc(sizeof(*session), GFP_KERNEL); + if (!session) + return ERR_PTR(-ENOMEM); + + session->gdev = gdev; + session->user_session = user; + + return session; +} + +/** + * Closes a VBoxGuest session. + * @session: The session to close (and free). + */ +void vbg_core_close_session(struct vbg_session *session) +{ + struct vbg_dev *gdev = session->gdev; + int i, rc; + + vbg_set_session_capabilities(gdev, session, 0, U32_MAX, true); + vbg_set_session_event_filter(gdev, session, 0, U32_MAX, true); + + for (i = 0; i < ARRAY_SIZE(session->hgcm_client_ids); i++) { + if (!session->hgcm_client_ids[i]) + continue; + + vbg_hgcm_disconnect(gdev, session->hgcm_client_ids[i], &rc); + } + + kfree(session); +} + +static int vbg_ioctl_chk(struct vbg_ioctl_hdr *hdr, size_t in_size, + size_t out_size) +{ + if (hdr->size_in != (sizeof(*hdr) + in_size) || + hdr->size_out != (sizeof(*hdr) + out_size)) + return -EINVAL; + + return 0; +} + +static int vbg_ioctl_driver_version_info( + struct vbg_ioctl_driver_version_info *info) +{ + const u16 vbg_maj_version = VBG_IOC_VERSION >> 16; + u16 min_maj_version, req_maj_version; + + if (vbg_ioctl_chk(&info->hdr, sizeof(info->u.in), sizeof(info->u.out))) + return -EINVAL; + + req_maj_version = info->u.in.req_version >> 16; + min_maj_version = info->u.in.min_version >> 16; + + if (info->u.in.min_version > info->u.in.req_version || + min_maj_version != req_maj_version) + return -EINVAL; + + if (info->u.in.min_version <= VBG_IOC_VERSION && + min_maj_version == vbg_maj_version) { + info->u.out.session_version = VBG_IOC_VERSION; + } else { + info->u.out.session_version = U32_MAX; + info->hdr.rc = VERR_VERSION_MISMATCH; + } + + info->u.out.driver_version = VBG_IOC_VERSION; + info->u.out.driver_revision = 0; + info->u.out.reserved1 = 0; + info->u.out.reserved2 = 0; + + return 0; +} + +static bool vbg_wait_event_cond(struct vbg_dev *gdev, + struct vbg_session *session, + u32 event_mask) +{ + unsigned long flags; + bool wakeup; + u32 events; + + spin_lock_irqsave(&gdev->event_spinlock, flags); + + events = gdev->pending_events & event_mask; + wakeup = events || session->cancel_waiters; + + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + return wakeup; +} + +/* Must be called with the event_lock held */ +static u32 vbg_consume_events_locked(struct vbg_dev *gdev, + struct vbg_session *session, + u32 event_mask) +{ + u32 events = gdev->pending_events & event_mask; + + gdev->pending_events &= ~events; + return events; +} + +static int vbg_ioctl_wait_for_events(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_wait_for_events *wait) +{ + u32 timeout_ms = wait->u.in.timeout_ms; + u32 event_mask = wait->u.in.events; + unsigned long flags; + long timeout; + int ret = 0; + + if (vbg_ioctl_chk(&wait->hdr, sizeof(wait->u.in), sizeof(wait->u.out))) + return -EINVAL; + + if (timeout_ms == U32_MAX) + timeout = MAX_SCHEDULE_TIMEOUT; + else + timeout = msecs_to_jiffies(timeout_ms); + + wait->u.out.events = 0; + do { + timeout = wait_event_interruptible_timeout( + gdev->event_wq, + vbg_wait_event_cond(gdev, session, event_mask), + timeout); + + spin_lock_irqsave(&gdev->event_spinlock, flags); + + if (timeout < 0 || session->cancel_waiters) { + ret = -EINTR; + } else if (timeout == 0) { + ret = -ETIMEDOUT; + } else { + wait->u.out.events = + vbg_consume_events_locked(gdev, session, event_mask); + } + + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + /* + * Someone else may have consumed the event(s) first, in + * which case we go back to waiting. + */ + } while (ret == 0 && wait->u.out.events == 0); + + return ret; +} + +static int vbg_ioctl_interrupt_all_wait_events(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_hdr *hdr) +{ + unsigned long flags; + + if (hdr->size_in != sizeof(*hdr) || hdr->size_out != sizeof(*hdr)) + return -EINVAL; + + spin_lock_irqsave(&gdev->event_spinlock, flags); + session->cancel_waiters = true; + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + wake_up(&gdev->event_wq); + + return 0; +} + +/** + * Checks if the VMM request is allowed in the context of the given session. + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @session: The calling session. + * @req: The request. + */ +static int vbg_req_allowed(struct vbg_dev *gdev, struct vbg_session *session, + const struct vmmdev_request_header *req) +{ + const struct vmmdev_guest_status *guest_status; + bool trusted_apps_only; + + switch (req->request_type) { + /* Trusted users apps only. */ + case VMMDEVREQ_QUERY_CREDENTIALS: + case VMMDEVREQ_REPORT_CREDENTIALS_JUDGEMENT: + case VMMDEVREQ_REGISTER_SHARED_MODULE: + case VMMDEVREQ_UNREGISTER_SHARED_MODULE: + case VMMDEVREQ_WRITE_COREDUMP: + case VMMDEVREQ_GET_CPU_HOTPLUG_REQ: + case VMMDEVREQ_SET_CPU_HOTPLUG_STATUS: + case VMMDEVREQ_CHECK_SHARED_MODULES: + case VMMDEVREQ_GET_PAGE_SHARING_STATUS: + case VMMDEVREQ_DEBUG_IS_PAGE_SHARED: + case VMMDEVREQ_REPORT_GUEST_STATS: + case VMMDEVREQ_REPORT_GUEST_USER_STATE: + case VMMDEVREQ_GET_STATISTICS_CHANGE_REQ: + trusted_apps_only = true; + break; + + /* Anyone. */ + case VMMDEVREQ_GET_MOUSE_STATUS: + case VMMDEVREQ_SET_MOUSE_STATUS: + case VMMDEVREQ_SET_POINTER_SHAPE: + case VMMDEVREQ_GET_HOST_VERSION: + case VMMDEVREQ_IDLE: + case VMMDEVREQ_GET_HOST_TIME: + case VMMDEVREQ_SET_POWER_STATUS: + case VMMDEVREQ_ACKNOWLEDGE_EVENTS: + case VMMDEVREQ_CTL_GUEST_FILTER_MASK: + case VMMDEVREQ_REPORT_GUEST_STATUS: + case VMMDEVREQ_GET_DISPLAY_CHANGE_REQ: + case VMMDEVREQ_VIDEMODE_SUPPORTED: + case VMMDEVREQ_GET_HEIGHT_REDUCTION: + case VMMDEVREQ_GET_DISPLAY_CHANGE_REQ2: + case VMMDEVREQ_VIDEMODE_SUPPORTED2: + case VMMDEVREQ_VIDEO_ACCEL_ENABLE: + case VMMDEVREQ_VIDEO_ACCEL_FLUSH: + case VMMDEVREQ_VIDEO_SET_VISIBLE_REGION: + case VMMDEVREQ_GET_DISPLAY_CHANGE_REQEX: + case VMMDEVREQ_GET_SEAMLESS_CHANGE_REQ: + case VMMDEVREQ_GET_VRDPCHANGE_REQ: + case VMMDEVREQ_LOG_STRING: + case VMMDEVREQ_GET_SESSION_ID: + trusted_apps_only = false; + break; + + /* Depends on the request parameters... */ + case VMMDEVREQ_REPORT_GUEST_CAPABILITIES: + guest_status = (const struct vmmdev_guest_status *)req; + switch (guest_status->facility) { + case VBOXGUEST_FACILITY_TYPE_ALL: + case VBOXGUEST_FACILITY_TYPE_VBOXGUEST_DRIVER: + vbg_err("Denying userspace vmm report guest cap. call facility %#08x\n", + guest_status->facility); + return -EPERM; + case VBOXGUEST_FACILITY_TYPE_VBOX_SERVICE: + trusted_apps_only = true; + break; + case VBOXGUEST_FACILITY_TYPE_VBOX_TRAY_CLIENT: + case VBOXGUEST_FACILITY_TYPE_SEAMLESS: + case VBOXGUEST_FACILITY_TYPE_GRAPHICS: + default: + trusted_apps_only = false; + break; + } + break; + + /* Anything else is not allowed. */ + default: + vbg_err("Denying userspace vmm call type %#08x\n", + req->request_type); + return -EPERM; + } + + if (trusted_apps_only && session->user_session) { + vbg_err("Denying userspace vmm call type %#08x through vboxuser device node\n", + req->request_type); + return -EPERM; + } + + return 0; +} + +static int vbg_ioctl_vmmrequest(struct vbg_dev *gdev, + struct vbg_session *session, void *data) +{ + struct vbg_ioctl_hdr *hdr = data; + int ret; + + if (hdr->size_in != hdr->size_out) + return -EINVAL; + + if (hdr->size_in > VMMDEV_MAX_VMMDEVREQ_SIZE) + return -E2BIG; + + if (hdr->type == VBG_IOCTL_HDR_TYPE_DEFAULT) + return -EINVAL; + + ret = vbg_req_allowed(gdev, session, data); + if (ret < 0) + return ret; + + vbg_req_perform(gdev, data); + WARN_ON(hdr->rc == VINF_HGCM_ASYNC_EXECUTE); + + return 0; +} + +static int vbg_ioctl_hgcm_connect(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_hgcm_connect *conn) +{ + u32 client_id; + int i, ret; + + if (vbg_ioctl_chk(&conn->hdr, sizeof(conn->u.in), sizeof(conn->u.out))) + return -EINVAL; + + /* Find a free place in the sessions clients array and claim it */ + mutex_lock(&gdev->session_mutex); + for (i = 0; i < ARRAY_SIZE(session->hgcm_client_ids); i++) { + if (!session->hgcm_client_ids[i]) { + session->hgcm_client_ids[i] = U32_MAX; + break; + } + } + mutex_unlock(&gdev->session_mutex); + + if (i >= ARRAY_SIZE(session->hgcm_client_ids)) + return -EMFILE; + + ret = vbg_hgcm_connect(gdev, &conn->u.in.loc, &client_id, + &conn->hdr.rc); + + mutex_lock(&gdev->session_mutex); + if (ret == 0 && conn->hdr.rc >= 0) { + conn->u.out.client_id = client_id; + session->hgcm_client_ids[i] = client_id; + } else { + conn->u.out.client_id = 0; + session->hgcm_client_ids[i] = 0; + } + mutex_unlock(&gdev->session_mutex); + + return ret; +} + +static int vbg_ioctl_hgcm_disconnect(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_hgcm_disconnect *disconn) +{ + u32 client_id; + int i, ret; + + if (vbg_ioctl_chk(&disconn->hdr, sizeof(disconn->u.in), 0)) + return -EINVAL; + + client_id = disconn->u.in.client_id; + if (client_id == 0 || client_id == U32_MAX) + return -EINVAL; + + mutex_lock(&gdev->session_mutex); + for (i = 0; i < ARRAY_SIZE(session->hgcm_client_ids); i++) { + if (session->hgcm_client_ids[i] == client_id) { + session->hgcm_client_ids[i] = U32_MAX; + break; + } + } + mutex_unlock(&gdev->session_mutex); + + if (i >= ARRAY_SIZE(session->hgcm_client_ids)) + return -EINVAL; + + ret = vbg_hgcm_disconnect(gdev, client_id, &disconn->hdr.rc); + + mutex_lock(&gdev->session_mutex); + if (ret == 0 && disconn->hdr.rc >= 0) + session->hgcm_client_ids[i] = 0; + else + session->hgcm_client_ids[i] = client_id; + mutex_unlock(&gdev->session_mutex); + + return ret; +} + +static int vbg_ioctl_hgcm_call(struct vbg_dev *gdev, + struct vbg_session *session, bool f32bit, + struct vbg_ioctl_hgcm_call *call) +{ + size_t actual_size; + u32 client_id; + int i, ret; + + if (call->hdr.size_in < sizeof(*call)) + return -EINVAL; + + if (call->hdr.size_in != call->hdr.size_out) + return -EINVAL; + + if (call->parm_count > VMMDEV_HGCM_MAX_PARMS) + return -E2BIG; + + client_id = call->client_id; + if (client_id == 0 || client_id == U32_MAX) + return -EINVAL; + + actual_size = sizeof(*call); + if (f32bit) + actual_size += call->parm_count * + sizeof(struct vmmdev_hgcm_function_parameter32); + else + actual_size += call->parm_count * + sizeof(struct vmmdev_hgcm_function_parameter); + if (call->hdr.size_in < actual_size) { + vbg_debug("VBG_IOCTL_HGCM_CALL: hdr.size_in %d required size is %zd\n", + call->hdr.size_in, actual_size); + return -EINVAL; + } + call->hdr.size_out = actual_size; + + /* + * Validate the client id. + */ + mutex_lock(&gdev->session_mutex); + for (i = 0; i < ARRAY_SIZE(session->hgcm_client_ids); i++) + if (session->hgcm_client_ids[i] == client_id) + break; + mutex_unlock(&gdev->session_mutex); + if (i >= ARRAY_SIZE(session->hgcm_client_ids)) { + vbg_debug("VBG_IOCTL_HGCM_CALL: INVALID handle. u32Client=%#08x\n", + client_id); + return -EINVAL; + } + + if (f32bit) + ret = vbg_hgcm_call32(gdev, client_id, + call->function, call->timeout_ms, + VBG_IOCTL_HGCM_CALL_PARMS32(call), + call->parm_count, &call->hdr.rc); + else + ret = vbg_hgcm_call(gdev, client_id, + call->function, call->timeout_ms, + VBG_IOCTL_HGCM_CALL_PARMS(call), + call->parm_count, &call->hdr.rc); + + if (ret == -E2BIG) { + /* E2BIG needs to be reported through the hdr.rc field. */ + call->hdr.rc = VERR_OUT_OF_RANGE; + ret = 0; + } + + if (ret && ret != -EINTR && ret != -ETIMEDOUT) + vbg_err("VBG_IOCTL_HGCM_CALL error: %d\n", ret); + + return ret; +} + +static int vbg_ioctl_log(struct vbg_ioctl_log *log) +{ + if (log->hdr.size_out != sizeof(log->hdr)) + return -EINVAL; + + vbg_info("%.*s", (int)(log->hdr.size_in - sizeof(log->hdr)), + log->u.in.msg); + + return 0; +} + +static int vbg_ioctl_change_filter_mask(struct vbg_dev *gdev, + struct vbg_session *session, + struct vbg_ioctl_change_filter *filter) +{ + u32 or_mask, not_mask; + + if (vbg_ioctl_chk(&filter->hdr, sizeof(filter->u.in), 0)) + return -EINVAL; + + or_mask = filter->u.in.or_mask; + not_mask = filter->u.in.not_mask; + + if ((or_mask | not_mask) & ~VMMDEV_EVENT_VALID_EVENT_MASK) + return -EINVAL; + + return vbg_set_session_event_filter(gdev, session, or_mask, not_mask, + false); +} + +static int vbg_ioctl_change_guest_capabilities(struct vbg_dev *gdev, + struct vbg_session *session, struct vbg_ioctl_set_guest_caps *caps) +{ + u32 or_mask, not_mask; + int ret; + + if (vbg_ioctl_chk(&caps->hdr, sizeof(caps->u.in), sizeof(caps->u.out))) + return -EINVAL; + + or_mask = caps->u.in.or_mask; + not_mask = caps->u.in.not_mask; + + if ((or_mask | not_mask) & ~VMMDEV_EVENT_VALID_EVENT_MASK) + return -EINVAL; + + ret = vbg_set_session_capabilities(gdev, session, or_mask, not_mask, + false); + if (ret) + return ret; + + caps->u.out.session_caps = session->guest_caps; + caps->u.out.global_caps = gdev->guest_caps_host; + + return 0; +} + +static int vbg_ioctl_check_balloon(struct vbg_dev *gdev, + struct vbg_ioctl_check_balloon *balloon_info) +{ + if (vbg_ioctl_chk(&balloon_info->hdr, 0, sizeof(balloon_info->u.out))) + return -EINVAL; + + balloon_info->u.out.balloon_chunks = gdev->mem_balloon.chunks; + /* + * Under Linux we handle VMMDEV_EVENT_BALLOON_CHANGE_REQUEST + * events entirely in the kernel, see vbg_core_isr(). + */ + balloon_info->u.out.handle_in_r3 = false; + + return 0; +} + +static int vbg_ioctl_write_core_dump(struct vbg_dev *gdev, + struct vbg_ioctl_write_coredump *dump) +{ + struct vmmdev_write_core_dump *req; + + if (vbg_ioctl_chk(&dump->hdr, sizeof(dump->u.in), 0)) + return -EINVAL; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_WRITE_COREDUMP); + if (!req) + return -ENOMEM; + + req->flags = dump->u.in.flags; + dump->hdr.rc = vbg_req_perform(gdev, req); + + kfree(req); + return 0; +} + +/** + * Common IOCtl for user to kernel communication. + * Return: 0 or negative errno value. + * @session: The client session. + * @req: The requested function. + * @data: The i/o data buffer, minimum size sizeof(struct vbg_ioctl_hdr). + */ +int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data) +{ + unsigned int req_no_size = req & ~IOCSIZE_MASK; + struct vbg_dev *gdev = session->gdev; + struct vbg_ioctl_hdr *hdr = data; + bool f32bit = false; + + hdr->rc = VINF_SUCCESS; + if (!hdr->size_out) + hdr->size_out = hdr->size_in; + + /* + * hdr->version and hdr->size_in / hdr->size_out minimum size are + * already checked by vbg_misc_device_ioctl(). + */ + + /* For VMMDEV_REQUEST hdr->type != VBG_IOCTL_HDR_TYPE_DEFAULT */ + if (req_no_size == VBG_IOCTL_VMMDEV_REQUEST(0) || + req == VBG_IOCTL_VMMDEV_REQUEST_BIG) + return vbg_ioctl_vmmrequest(gdev, session, data); + + if (hdr->type != VBG_IOCTL_HDR_TYPE_DEFAULT) + return -EINVAL; + + /* Fixed size requests. */ + switch (req) { + case VBG_IOCTL_DRIVER_VERSION_INFO: + return vbg_ioctl_driver_version_info(data); + case VBG_IOCTL_HGCM_CONNECT: + return vbg_ioctl_hgcm_connect(gdev, session, data); + case VBG_IOCTL_HGCM_DISCONNECT: + return vbg_ioctl_hgcm_disconnect(gdev, session, data); + case VBG_IOCTL_WAIT_FOR_EVENTS: + return vbg_ioctl_wait_for_events(gdev, session, data); + case VBG_IOCTL_INTERRUPT_ALL_WAIT_FOR_EVENTS: + return vbg_ioctl_interrupt_all_wait_events(gdev, session, data); + case VBG_IOCTL_CHANGE_FILTER_MASK: + return vbg_ioctl_change_filter_mask(gdev, session, data); + case VBG_IOCTL_CHANGE_GUEST_CAPABILITIES: + return vbg_ioctl_change_guest_capabilities(gdev, session, data); + case VBG_IOCTL_CHECK_BALLOON: + return vbg_ioctl_check_balloon(gdev, data); + case VBG_IOCTL_WRITE_CORE_DUMP: + return vbg_ioctl_write_core_dump(gdev, data); + } + + /* Variable sized requests. */ + switch (req_no_size) { +#ifdef CONFIG_COMPAT + case VBG_IOCTL_HGCM_CALL_32(0): + f32bit = true; + /* Fall through */ +#endif + case VBG_IOCTL_HGCM_CALL(0): + return vbg_ioctl_hgcm_call(gdev, session, f32bit, data); + case VBG_IOCTL_LOG(0): + return vbg_ioctl_log(data); + } + + vbg_debug("VGDrvCommonIoCtl: Unknown req %#08x\n", req); + return -ENOTTY; +} + +/** + * Report guest supported mouse-features to the host. + * + * Return: 0 or negative errno value. + * @gdev: The Guest extension device. + * @features: The set of features to report to the host. + */ +int vbg_core_set_mouse_status(struct vbg_dev *gdev, u32 features) +{ + struct vmmdev_mouse_status *req; + int rc; + + req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_MOUSE_STATUS); + if (!req) + return -ENOMEM; + + req->mouse_features = features; + req->pointer_pos_x = 0; + req->pointer_pos_y = 0; + + rc = vbg_req_perform(gdev, req); + if (rc < 0) + vbg_err("%s error, rc: %d\n", __func__, rc); + + kfree(req); + return vbg_status_code_to_errno(rc); +} + +/** Core interrupt service routine. */ +irqreturn_t vbg_core_isr(int irq, void *dev_id) +{ + struct vbg_dev *gdev = dev_id; + struct vmmdev_events *req = gdev->ack_events_req; + bool mouse_position_changed = false; + unsigned long flags; + u32 events = 0; + int rc; + + if (!gdev->mmio->V.V1_04.have_events) + return IRQ_NONE; + + /* Get and acknowlegde events. */ + req->header.rc = VERR_INTERNAL_ERROR; + req->events = 0; + rc = vbg_req_perform(gdev, req); + if (rc < 0) { + vbg_err("Error performing events req, rc: %d\n", rc); + return IRQ_NONE; + } + + events = req->events; + + if (events & VMMDEV_EVENT_MOUSE_POSITION_CHANGED) { + mouse_position_changed = true; + events &= ~VMMDEV_EVENT_MOUSE_POSITION_CHANGED; + } + + if (events & VMMDEV_EVENT_HGCM) { + wake_up(&gdev->hgcm_wq); + events &= ~VMMDEV_EVENT_HGCM; + } + + if (events & VMMDEV_EVENT_BALLOON_CHANGE_REQUEST) { + schedule_work(&gdev->mem_balloon.work); + events &= ~VMMDEV_EVENT_BALLOON_CHANGE_REQUEST; + } + + if (events) { + spin_lock_irqsave(&gdev->event_spinlock, flags); + gdev->pending_events |= events; + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + wake_up(&gdev->event_wq); + } + + if (mouse_position_changed) + vbg_linux_mouse_event(gdev); + + return IRQ_HANDLED; +} diff --git a/drivers/virt/vboxguest/vboxguest_core.h b/drivers/virt/vboxguest/vboxguest_core.h new file mode 100644 index 000000000000..6c784bf4fa6d --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_core.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* Copyright (C) 2010-2016 Oracle Corporation */ + +#ifndef __VBOXGUEST_CORE_H__ +#define __VBOXGUEST_CORE_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "vmmdev.h" + +struct vbg_session; + +/** VBox guest memory balloon. */ +struct vbg_mem_balloon { + /** Work handling VMMDEV_EVENT_BALLOON_CHANGE_REQUEST events */ + struct work_struct work; + /** Pre-allocated vmmdev_memballoon_info req for query */ + struct vmmdev_memballoon_info *get_req; + /** Pre-allocated vmmdev_memballoon_change req for inflate / deflate */ + struct vmmdev_memballoon_change *change_req; + /** The current number of chunks in the balloon. */ + u32 chunks; + /** The maximum number of chunks in the balloon. */ + u32 max_chunks; + /** + * Array of pointers to page arrays. A page * array is allocated for + * each chunk when inflating, and freed when the deflating. + */ + struct page ***pages; +}; + +/** + * Per bit usage tracker for a u32 mask. + * + * Used for optimal handling of guest properties and event filter. + */ +struct vbg_bit_usage_tracker { + /** Per bit usage counters. */ + u32 per_bit_usage[32]; + /** The current mask according to per_bit_usage. */ + u32 mask; +}; + +/** VBox guest device (data) extension. */ +struct vbg_dev { + struct device *dev; + /** The base of the adapter I/O ports. */ + u16 io_port; + /** Pointer to the mapping of the VMMDev adapter memory. */ + struct vmmdev_memory *mmio; + /** Host version */ + char host_version[64]; + /** Host features */ + unsigned int host_features; + /** + * Dummy page and vmap address for reserved kernel virtual-address + * space for the guest mappings, only used on hosts lacking vtx. + */ + struct page *guest_mappings_dummy_page; + void *guest_mappings; + /** Spinlock protecting pending_events. */ + spinlock_t event_spinlock; + /** Preallocated struct vmmdev_events for the IRQ handler. */ + struct vmmdev_events *ack_events_req; + /** Wait-for-event list for threads waiting for multiple events. */ + wait_queue_head_t event_wq; + /** Mask of pending events. */ + u32 pending_events; + /** Wait-for-event list for threads waiting on HGCM async completion. */ + wait_queue_head_t hgcm_wq; + /** Pre-allocated hgcm cancel2 req. for cancellation on timeout */ + struct vmmdev_hgcm_cancel2 *cancel_req; + /** Mutex protecting cancel_req accesses */ + struct mutex cancel_req_mutex; + /** Pre-allocated mouse-status request for the input-device handling. */ + struct vmmdev_mouse_status *mouse_status_req; + /** Input device for reporting abs mouse coordinates to the guest. */ + struct input_dev *input; + + /** Memory balloon information. */ + struct vbg_mem_balloon mem_balloon; + + /** Lock for session related items in vbg_dev and vbg_session */ + struct mutex session_mutex; + /** Events we won't permit anyone to filter out. */ + u32 fixed_events; + /** + * Usage counters for the host events (excludes fixed events), + * Protected by session_mutex. + */ + struct vbg_bit_usage_tracker event_filter_tracker; + /** + * The event filter last reported to the host (or UINT32_MAX). + * Protected by session_mutex. + */ + u32 event_filter_host; + + /** + * Usage counters for guest capabilities. Indexed by capability bit + * number, one count per session using a capability. + * Protected by session_mutex. + */ + struct vbg_bit_usage_tracker guest_caps_tracker; + /** + * The guest capabilities last reported to the host (or UINT32_MAX). + * Protected by session_mutex. + */ + u32 guest_caps_host; + + /** + * Heartbeat timer which fires with interval + * cNsHearbeatInterval and its handler sends + * VMMDEVREQ_GUEST_HEARTBEAT to VMMDev. + */ + struct timer_list heartbeat_timer; + /** Heartbeat timer interval in ms. */ + int heartbeat_interval_ms; + /** Preallocated VMMDEVREQ_GUEST_HEARTBEAT request. */ + struct vmmdev_request_header *guest_heartbeat_req; + + /** "vboxguest" char-device */ + struct miscdevice misc_device; + /** "vboxuser" char-device */ + struct miscdevice misc_device_user; +}; + +/** The VBoxGuest per session data. */ +struct vbg_session { + /** Pointer to the device extension. */ + struct vbg_dev *gdev; + + /** + * Array containing HGCM client IDs associated with this session. + * These will be automatically disconnected when the session is closed. + * Protected by vbg_gdev.session_mutex. + */ + u32 hgcm_client_ids[64]; + /** + * Host events requested by the session. + * An event type requested in any guest session will be added to the + * host filter. Protected by vbg_gdev.session_mutex. + */ + u32 event_filter; + /** + * Guest capabilities for this session. + * A capability claimed by any guest session will be reported to the + * host. Protected by vbg_gdev.session_mutex. + */ + u32 guest_caps; + /** Does this session belong to a root process or a user one? */ + bool user_session; + /** Set on CANCEL_ALL_WAITEVENTS, protected by vbg_devevent_spinlock. */ + bool cancel_waiters; +}; + +int vbg_core_init(struct vbg_dev *gdev, u32 fixed_events); +void vbg_core_exit(struct vbg_dev *gdev); +struct vbg_session *vbg_core_open_session(struct vbg_dev *gdev, bool user); +void vbg_core_close_session(struct vbg_session *session); +int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data); +int vbg_core_set_mouse_status(struct vbg_dev *gdev, u32 features); + +irqreturn_t vbg_core_isr(int irq, void *dev_id); + +void vbg_linux_mouse_event(struct vbg_dev *gdev); + +#endif diff --git a/drivers/virt/vboxguest/vboxguest_linux.c b/drivers/virt/vboxguest/vboxguest_linux.c new file mode 100644 index 000000000000..82e280d38cc2 --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_linux.c @@ -0,0 +1,466 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * vboxguest linux pci driver, char-dev and input-device code, + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include "vboxguest_core.h" + +/** The device name. */ +#define DEVICE_NAME "vboxguest" +/** The device name for the device node open to everyone. */ +#define DEVICE_NAME_USER "vboxuser" +/** VirtualBox PCI vendor ID. */ +#define VBOX_VENDORID 0x80ee +/** VMMDev PCI card product ID. */ +#define VMMDEV_DEVICEID 0xcafe + +/** Mutex protecting the global vbg_gdev pointer used by vbg_get/put_gdev. */ +static DEFINE_MUTEX(vbg_gdev_mutex); +/** Global vbg_gdev pointer used by vbg_get/put_gdev. */ +static struct vbg_dev *vbg_gdev; + +static int vbg_misc_device_open(struct inode *inode, struct file *filp) +{ + struct vbg_session *session; + struct vbg_dev *gdev; + + /* misc_open sets filp->private_data to our misc device */ + gdev = container_of(filp->private_data, struct vbg_dev, misc_device); + + session = vbg_core_open_session(gdev, false); + if (IS_ERR(session)) + return PTR_ERR(session); + + filp->private_data = session; + return 0; +} + +static int vbg_misc_device_user_open(struct inode *inode, struct file *filp) +{ + struct vbg_session *session; + struct vbg_dev *gdev; + + /* misc_open sets filp->private_data to our misc device */ + gdev = container_of(filp->private_data, struct vbg_dev, + misc_device_user); + + session = vbg_core_open_session(gdev, false); + if (IS_ERR(session)) + return PTR_ERR(session); + + filp->private_data = session; + return 0; +} + +/** + * Close device. + * Return: 0 on success, negated errno on failure. + * @inode: Pointer to inode info structure. + * @filp: Associated file pointer. + */ +static int vbg_misc_device_close(struct inode *inode, struct file *filp) +{ + vbg_core_close_session(filp->private_data); + filp->private_data = NULL; + return 0; +} + +/** + * Device I/O Control entry point. + * Return: 0 on success, negated errno on failure. + * @filp: Associated file pointer. + * @req: The request specified to ioctl(). + * @arg: The argument specified to ioctl(). + */ +static long vbg_misc_device_ioctl(struct file *filp, unsigned int req, + unsigned long arg) +{ + struct vbg_session *session = filp->private_data; + size_t returned_size, size; + struct vbg_ioctl_hdr hdr; + int ret = 0; + void *buf; + + if (copy_from_user(&hdr, (void *)arg, sizeof(hdr))) + return -EFAULT; + + if (hdr.version != VBG_IOCTL_HDR_VERSION) + return -EINVAL; + + if (hdr.size_in < sizeof(hdr) || + (hdr.size_out && hdr.size_out < sizeof(hdr))) + return -EINVAL; + + size = max(hdr.size_in, hdr.size_out); + if (_IOC_SIZE(req) && _IOC_SIZE(req) != size) + return -EINVAL; + if (size > SZ_16M) + return -E2BIG; + + /* __GFP_DMA32 because IOCTL_VMMDEV_REQUEST passes this to the host */ + buf = kmalloc(size, GFP_KERNEL | __GFP_DMA32); + if (!buf) + return -ENOMEM; + + if (copy_from_user(buf, (void *)arg, hdr.size_in)) { + ret = -EFAULT; + goto out; + } + if (hdr.size_in < size) + memset(buf + hdr.size_in, 0, size - hdr.size_in); + + ret = vbg_core_ioctl(session, req, buf); + if (ret) + goto out; + + returned_size = ((struct vbg_ioctl_hdr *)buf)->size_out; + if (returned_size > size) { + vbg_debug("%s: too much output data %zu > %zu\n", + __func__, returned_size, size); + returned_size = size; + } + if (copy_to_user((void *)arg, buf, returned_size) != 0) + ret = -EFAULT; + +out: + kfree(buf); + + return ret; +} + +/** The file_operations structures. */ +static const struct file_operations vbg_misc_device_fops = { + .owner = THIS_MODULE, + .open = vbg_misc_device_open, + .release = vbg_misc_device_close, + .unlocked_ioctl = vbg_misc_device_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vbg_misc_device_ioctl, +#endif +}; +static const struct file_operations vbg_misc_device_user_fops = { + .owner = THIS_MODULE, + .open = vbg_misc_device_user_open, + .release = vbg_misc_device_close, + .unlocked_ioctl = vbg_misc_device_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = vbg_misc_device_ioctl, +#endif +}; + +/** + * Called when the input device is first opened. + * + * Sets up absolute mouse reporting. + */ +static int vbg_input_open(struct input_dev *input) +{ + struct vbg_dev *gdev = input_get_drvdata(input); + u32 feat = VMMDEV_MOUSE_GUEST_CAN_ABSOLUTE | VMMDEV_MOUSE_NEW_PROTOCOL; + int ret; + + ret = vbg_core_set_mouse_status(gdev, feat); + if (ret) + return ret; + + return 0; +} + +/** + * Called if all open handles to the input device are closed. + * + * Disables absolute reporting. + */ +static void vbg_input_close(struct input_dev *input) +{ + struct vbg_dev *gdev = input_get_drvdata(input); + + vbg_core_set_mouse_status(gdev, 0); +} + +/** + * Creates the kernel input device. + * + * Return: 0 on success, negated errno on failure. + */ +static int vbg_create_input_device(struct vbg_dev *gdev) +{ + struct input_dev *input; + + input = devm_input_allocate_device(gdev->dev); + if (!input) + return -ENOMEM; + + input->id.bustype = BUS_PCI; + input->id.vendor = VBOX_VENDORID; + input->id.product = VMMDEV_DEVICEID; + input->open = vbg_input_open; + input->close = vbg_input_close; + input->dev.parent = gdev->dev; + input->name = "VirtualBox mouse integration"; + + input_set_abs_params(input, ABS_X, VMMDEV_MOUSE_RANGE_MIN, + VMMDEV_MOUSE_RANGE_MAX, 0, 0); + input_set_abs_params(input, ABS_Y, VMMDEV_MOUSE_RANGE_MIN, + VMMDEV_MOUSE_RANGE_MAX, 0, 0); + input_set_capability(input, EV_KEY, BTN_MOUSE); + input_set_drvdata(input, gdev); + + gdev->input = input; + + return input_register_device(gdev->input); +} + +static ssize_t host_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vbg_dev *gdev = dev_get_drvdata(dev); + + return sprintf(buf, "%s\n", gdev->host_version); +} + +static ssize_t host_features_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct vbg_dev *gdev = dev_get_drvdata(dev); + + return sprintf(buf, "%#x\n", gdev->host_features); +} + +static DEVICE_ATTR_RO(host_version); +static DEVICE_ATTR_RO(host_features); + +/** + * Does the PCI detection and init of the device. + * + * Return: 0 on success, negated errno on failure. + */ +static int vbg_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) +{ + struct device *dev = &pci->dev; + resource_size_t io, io_len, mmio, mmio_len; + struct vmmdev_memory *vmmdev; + struct vbg_dev *gdev; + int ret; + + gdev = devm_kzalloc(dev, sizeof(*gdev), GFP_KERNEL); + if (!gdev) + return -ENOMEM; + + ret = pci_enable_device(pci); + if (ret != 0) { + vbg_err("vboxguest: Error enabling device: %d\n", ret); + return ret; + } + + ret = -ENODEV; + + io = pci_resource_start(pci, 0); + io_len = pci_resource_len(pci, 0); + if (!io || !io_len) { + vbg_err("vboxguest: Error IO-port resource (0) is missing\n"); + goto err_disable_pcidev; + } + if (devm_request_region(dev, io, io_len, DEVICE_NAME) == NULL) { + vbg_err("vboxguest: Error could not claim IO resource\n"); + ret = -EBUSY; + goto err_disable_pcidev; + } + + mmio = pci_resource_start(pci, 1); + mmio_len = pci_resource_len(pci, 1); + if (!mmio || !mmio_len) { + vbg_err("vboxguest: Error MMIO resource (1) is missing\n"); + goto err_disable_pcidev; + } + + if (devm_request_mem_region(dev, mmio, mmio_len, DEVICE_NAME) == NULL) { + vbg_err("vboxguest: Error could not claim MMIO resource\n"); + ret = -EBUSY; + goto err_disable_pcidev; + } + + vmmdev = devm_ioremap(dev, mmio, mmio_len); + if (!vmmdev) { + vbg_err("vboxguest: Error ioremap failed; MMIO addr=%pap size=%pap\n", + &mmio, &mmio_len); + goto err_disable_pcidev; + } + + /* Validate MMIO region version and size. */ + if (vmmdev->version != VMMDEV_MEMORY_VERSION || + vmmdev->size < 32 || vmmdev->size > mmio_len) { + vbg_err("vboxguest: Bogus VMMDev memory; version=%08x (expected %08x) size=%d (expected <= %d)\n", + vmmdev->version, VMMDEV_MEMORY_VERSION, + vmmdev->size, (int)mmio_len); + goto err_disable_pcidev; + } + + gdev->io_port = io; + gdev->mmio = vmmdev; + gdev->dev = dev; + gdev->misc_device.minor = MISC_DYNAMIC_MINOR; + gdev->misc_device.name = DEVICE_NAME; + gdev->misc_device.fops = &vbg_misc_device_fops; + gdev->misc_device_user.minor = MISC_DYNAMIC_MINOR; + gdev->misc_device_user.name = DEVICE_NAME_USER; + gdev->misc_device_user.fops = &vbg_misc_device_user_fops; + + ret = vbg_core_init(gdev, VMMDEV_EVENT_MOUSE_POSITION_CHANGED); + if (ret) + goto err_disable_pcidev; + + ret = vbg_create_input_device(gdev); + if (ret) { + vbg_err("vboxguest: Error creating input device: %d\n", ret); + goto err_vbg_core_exit; + } + + ret = devm_request_irq(dev, pci->irq, vbg_core_isr, IRQF_SHARED, + DEVICE_NAME, gdev); + if (ret) { + vbg_err("vboxguest: Error requesting irq: %d\n", ret); + goto err_vbg_core_exit; + } + + ret = misc_register(&gdev->misc_device); + if (ret) { + vbg_err("vboxguest: Error misc_register %s failed: %d\n", + DEVICE_NAME, ret); + goto err_vbg_core_exit; + } + + ret = misc_register(&gdev->misc_device_user); + if (ret) { + vbg_err("vboxguest: Error misc_register %s failed: %d\n", + DEVICE_NAME_USER, ret); + goto err_unregister_misc_device; + } + + mutex_lock(&vbg_gdev_mutex); + if (!vbg_gdev) + vbg_gdev = gdev; + else + ret = -EBUSY; + mutex_unlock(&vbg_gdev_mutex); + + if (ret) { + vbg_err("vboxguest: Error more then 1 vbox guest pci device\n"); + goto err_unregister_misc_device_user; + } + + pci_set_drvdata(pci, gdev); + device_create_file(dev, &dev_attr_host_version); + device_create_file(dev, &dev_attr_host_features); + + vbg_info("vboxguest: misc device minor %d, IRQ %d, I/O port %x, MMIO at %pap (size %pap)\n", + gdev->misc_device.minor, pci->irq, gdev->io_port, + &mmio, &mmio_len); + + return 0; + +err_unregister_misc_device_user: + misc_deregister(&gdev->misc_device_user); +err_unregister_misc_device: + misc_deregister(&gdev->misc_device); +err_vbg_core_exit: + vbg_core_exit(gdev); +err_disable_pcidev: + pci_disable_device(pci); + + return ret; +} + +static void vbg_pci_remove(struct pci_dev *pci) +{ + struct vbg_dev *gdev = pci_get_drvdata(pci); + + mutex_lock(&vbg_gdev_mutex); + vbg_gdev = NULL; + mutex_unlock(&vbg_gdev_mutex); + + device_remove_file(gdev->dev, &dev_attr_host_features); + device_remove_file(gdev->dev, &dev_attr_host_version); + misc_deregister(&gdev->misc_device_user); + misc_deregister(&gdev->misc_device); + vbg_core_exit(gdev); + pci_disable_device(pci); +} + +struct vbg_dev *vbg_get_gdev(void) +{ + mutex_lock(&vbg_gdev_mutex); + + /* + * Note on success we keep the mutex locked until vbg_put_gdev(), + * this stops vbg_pci_remove from removing the device from underneath + * vboxsf. vboxsf will only hold a reference for a short while. + */ + if (vbg_gdev) + return vbg_gdev; + + mutex_unlock(&vbg_gdev_mutex); + return ERR_PTR(-ENODEV); +} +EXPORT_SYMBOL(vbg_get_gdev); + +void vbg_put_gdev(struct vbg_dev *gdev) +{ + WARN_ON(gdev != vbg_gdev); + mutex_unlock(&vbg_gdev_mutex); +} +EXPORT_SYMBOL(vbg_put_gdev); + +/** + * Callback for mouse events. + * + * This is called at the end of the ISR, after leaving the event spinlock, if + * VMMDEV_EVENT_MOUSE_POSITION_CHANGED was raised by the host. + * + * @gdev: The device extension. + */ +void vbg_linux_mouse_event(struct vbg_dev *gdev) +{ + int rc; + + /* Report events to the kernel input device */ + gdev->mouse_status_req->mouse_features = 0; + gdev->mouse_status_req->pointer_pos_x = 0; + gdev->mouse_status_req->pointer_pos_y = 0; + rc = vbg_req_perform(gdev, gdev->mouse_status_req); + if (rc >= 0) { + input_report_abs(gdev->input, ABS_X, + gdev->mouse_status_req->pointer_pos_x); + input_report_abs(gdev->input, ABS_Y, + gdev->mouse_status_req->pointer_pos_y); + input_sync(gdev->input); + } +} + +static const struct pci_device_id vbg_pci_ids[] = { + { .vendor = VBOX_VENDORID, .device = VMMDEV_DEVICEID }, + {} +}; +MODULE_DEVICE_TABLE(pci, vbg_pci_ids); + +static struct pci_driver vbg_pci_driver = { + .name = DEVICE_NAME, + .id_table = vbg_pci_ids, + .probe = vbg_pci_probe, + .remove = vbg_pci_remove, +}; + +module_pci_driver(vbg_pci_driver); + +MODULE_AUTHOR("Oracle Corporation"); +MODULE_DESCRIPTION("Oracle VM VirtualBox Guest Additions for Linux Module"); +MODULE_LICENSE("GPL"); diff --git a/drivers/virt/vboxguest/vboxguest_utils.c b/drivers/virt/vboxguest/vboxguest_utils.c new file mode 100644 index 000000000000..0f0dab8023cf --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_utils.c @@ -0,0 +1,803 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * vboxguest vmm-req and hgcm-call code, VBoxGuestR0LibHGCMInternal.cpp, + * VBoxGuestR0LibGenericRequest.cpp and RTErrConvertToErrno.cpp in vbox svn. + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "vboxguest_core.h" + +/* Get the pointer to the first parameter of a HGCM call request. */ +#define VMMDEV_HGCM_CALL_PARMS(a) \ + ((struct vmmdev_hgcm_function_parameter *)( \ + (u8 *)(a) + sizeof(struct vmmdev_hgcm_call))) + +/* The max parameter buffer size for a user request. */ +#define VBG_MAX_HGCM_USER_PARM (24 * SZ_1M) +/* The max parameter buffer size for a kernel request. */ +#define VBG_MAX_HGCM_KERNEL_PARM (16 * SZ_1M) + +#define VBG_DEBUG_PORT 0x504 + +/* This protects vbg_log_buf and serializes VBG_DEBUG_PORT accesses */ +static DEFINE_SPINLOCK(vbg_log_lock); +static char vbg_log_buf[128]; + +#define VBG_LOG(name, pr_func) \ +void name(const char *fmt, ...) \ +{ \ + unsigned long flags; \ + va_list args; \ + int i, count; \ + \ + va_start(args, fmt); \ + spin_lock_irqsave(&vbg_log_lock, flags); \ + \ + count = vscnprintf(vbg_log_buf, sizeof(vbg_log_buf), fmt, args);\ + for (i = 0; i < count; i++) \ + outb(vbg_log_buf[i], VBG_DEBUG_PORT); \ + \ + pr_func("%s", vbg_log_buf); \ + \ + spin_unlock_irqrestore(&vbg_log_lock, flags); \ + va_end(args); \ +} \ +EXPORT_SYMBOL(name) + +VBG_LOG(vbg_info, pr_info); +VBG_LOG(vbg_warn, pr_warn); +VBG_LOG(vbg_err, pr_err); +#if defined(DEBUG) && !defined(CONFIG_DYNAMIC_DEBUG) +VBG_LOG(vbg_debug, pr_debug); +#endif + +void *vbg_req_alloc(size_t len, enum vmmdev_request_type req_type) +{ + struct vmmdev_request_header *req; + + req = kmalloc(len, GFP_KERNEL | __GFP_DMA32); + if (!req) + return NULL; + + memset(req, 0xaa, len); + + req->size = len; + req->version = VMMDEV_REQUEST_HEADER_VERSION; + req->request_type = req_type; + req->rc = VERR_GENERAL_FAILURE; + req->reserved1 = 0; + req->reserved2 = 0; + + return req; +} + +/* Note this function returns a VBox status code, not a negative errno!! */ +int vbg_req_perform(struct vbg_dev *gdev, void *req) +{ + unsigned long phys_req = virt_to_phys(req); + + outl(phys_req, gdev->io_port + VMMDEV_PORT_OFF_REQUEST); + /* + * The host changes the request as a result of the outl, make sure + * the outl and any reads of the req happen in the correct order. + */ + mb(); + + return ((struct vmmdev_request_header *)req)->rc; +} + +static bool hgcm_req_done(struct vbg_dev *gdev, + struct vmmdev_hgcmreq_header *header) +{ + unsigned long flags; + bool done; + + spin_lock_irqsave(&gdev->event_spinlock, flags); + done = header->flags & VMMDEV_HGCM_REQ_DONE; + spin_unlock_irqrestore(&gdev->event_spinlock, flags); + + return done; +} + +int vbg_hgcm_connect(struct vbg_dev *gdev, + struct vmmdev_hgcm_service_location *loc, + u32 *client_id, int *vbox_status) +{ + struct vmmdev_hgcm_connect *hgcm_connect = NULL; + int rc; + + hgcm_connect = vbg_req_alloc(sizeof(*hgcm_connect), + VMMDEVREQ_HGCM_CONNECT); + if (!hgcm_connect) + return -ENOMEM; + + hgcm_connect->header.flags = 0; + memcpy(&hgcm_connect->loc, loc, sizeof(*loc)); + hgcm_connect->client_id = 0; + + rc = vbg_req_perform(gdev, hgcm_connect); + + if (rc == VINF_HGCM_ASYNC_EXECUTE) + wait_event(gdev->hgcm_wq, + hgcm_req_done(gdev, &hgcm_connect->header)); + + if (rc >= 0) { + *client_id = hgcm_connect->client_id; + rc = hgcm_connect->header.result; + } + + kfree(hgcm_connect); + + *vbox_status = rc; + return 0; +} +EXPORT_SYMBOL(vbg_hgcm_connect); + +int vbg_hgcm_disconnect(struct vbg_dev *gdev, u32 client_id, int *vbox_status) +{ + struct vmmdev_hgcm_disconnect *hgcm_disconnect = NULL; + int rc; + + hgcm_disconnect = vbg_req_alloc(sizeof(*hgcm_disconnect), + VMMDEVREQ_HGCM_DISCONNECT); + if (!hgcm_disconnect) + return -ENOMEM; + + hgcm_disconnect->header.flags = 0; + hgcm_disconnect->client_id = client_id; + + rc = vbg_req_perform(gdev, hgcm_disconnect); + + if (rc == VINF_HGCM_ASYNC_EXECUTE) + wait_event(gdev->hgcm_wq, + hgcm_req_done(gdev, &hgcm_disconnect->header)); + + if (rc >= 0) + rc = hgcm_disconnect->header.result; + + kfree(hgcm_disconnect); + + *vbox_status = rc; + return 0; +} +EXPORT_SYMBOL(vbg_hgcm_disconnect); + +static u32 hgcm_call_buf_size_in_pages(void *buf, u32 len) +{ + u32 size = PAGE_ALIGN(len + ((unsigned long)buf & ~PAGE_MASK)); + + return size >> PAGE_SHIFT; +} + +static void hgcm_call_add_pagelist_size(void *buf, u32 len, size_t *extra) +{ + u32 page_count; + + page_count = hgcm_call_buf_size_in_pages(buf, len); + *extra += offsetof(struct vmmdev_hgcm_pagelist, pages[page_count]); +} + +static int hgcm_call_preprocess_linaddr( + const struct vmmdev_hgcm_function_parameter *src_parm, + void **bounce_buf_ret, size_t *extra) +{ + void *buf, *bounce_buf; + bool copy_in; + u32 len; + int ret; + + buf = (void *)src_parm->u.pointer.u.linear_addr; + len = src_parm->u.pointer.size; + copy_in = src_parm->type != VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT; + + if (len > VBG_MAX_HGCM_USER_PARM) + return -E2BIG; + + bounce_buf = kvmalloc(len, GFP_KERNEL); + if (!bounce_buf) + return -ENOMEM; + + if (copy_in) { + ret = copy_from_user(bounce_buf, (void __user *)buf, len); + if (ret) + return -EFAULT; + } else { + memset(bounce_buf, 0, len); + } + + *bounce_buf_ret = bounce_buf; + hgcm_call_add_pagelist_size(bounce_buf, len, extra); + return 0; +} + +/** + * Preprocesses the HGCM call, validate parameters, alloc bounce buffers and + * figure out how much extra storage we need for page lists. + * Return: 0 or negative errno value. + * @src_parm: Pointer to source function call parameters + * @parm_count: Number of function call parameters. + * @bounce_bufs_ret: Where to return the allocated bouncebuffer array + * @extra: Where to return the extra request space needed for + * physical page lists. + */ +static int hgcm_call_preprocess( + const struct vmmdev_hgcm_function_parameter *src_parm, + u32 parm_count, void ***bounce_bufs_ret, size_t *extra) +{ + void *buf, **bounce_bufs = NULL; + u32 i, len; + int ret; + + for (i = 0; i < parm_count; i++, src_parm++) { + switch (src_parm->type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + case VMMDEV_HGCM_PARM_TYPE_64BIT: + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + if (!bounce_bufs) { + bounce_bufs = kcalloc(parm_count, + sizeof(void *), + GFP_KERNEL); + if (!bounce_bufs) + return -ENOMEM; + + *bounce_bufs_ret = bounce_bufs; + } + + ret = hgcm_call_preprocess_linaddr(src_parm, + &bounce_bufs[i], + extra); + if (ret) + return ret; + + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT: + buf = (void *)src_parm->u.pointer.u.linear_addr; + len = src_parm->u.pointer.size; + if (WARN_ON(len > VBG_MAX_HGCM_KERNEL_PARM)) + return -E2BIG; + + hgcm_call_add_pagelist_size(buf, len, extra); + break; + + default: + return -EINVAL; + } + } + + return 0; +} + +/** + * Translates linear address types to page list direction flags. + * + * Return: page list flags. + * @type: The type. + */ +static u32 hgcm_call_linear_addr_type_to_pagelist_flags( + enum vmmdev_hgcm_function_parameter_type type) +{ + switch (type) { + default: + WARN_ON(1); + /* Fall through */ + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL: + return VMMDEV_HGCM_F_PARM_DIRECTION_BOTH; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN: + return VMMDEV_HGCM_F_PARM_DIRECTION_TO_HOST; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT: + return VMMDEV_HGCM_F_PARM_DIRECTION_FROM_HOST; + } +} + +static void hgcm_call_init_linaddr(struct vmmdev_hgcm_call *call, + struct vmmdev_hgcm_function_parameter *dst_parm, void *buf, u32 len, + enum vmmdev_hgcm_function_parameter_type type, u32 *off_extra) +{ + struct vmmdev_hgcm_pagelist *dst_pg_lst; + struct page *page; + bool is_vmalloc; + u32 i, page_count; + + dst_parm->type = type; + + if (len == 0) { + dst_parm->u.pointer.size = 0; + dst_parm->u.pointer.u.linear_addr = 0; + return; + } + + dst_pg_lst = (void *)call + *off_extra; + page_count = hgcm_call_buf_size_in_pages(buf, len); + is_vmalloc = is_vmalloc_addr(buf); + + dst_parm->type = VMMDEV_HGCM_PARM_TYPE_PAGELIST; + dst_parm->u.page_list.size = len; + dst_parm->u.page_list.offset = *off_extra; + dst_pg_lst->flags = hgcm_call_linear_addr_type_to_pagelist_flags(type); + dst_pg_lst->offset_first_page = (unsigned long)buf & ~PAGE_MASK; + dst_pg_lst->page_count = page_count; + + for (i = 0; i < page_count; i++) { + if (is_vmalloc) + page = vmalloc_to_page(buf); + else + page = virt_to_page(buf); + + dst_pg_lst->pages[i] = page_to_phys(page); + buf += PAGE_SIZE; + } + + *off_extra += offsetof(struct vmmdev_hgcm_pagelist, pages[page_count]); +} + +/** + * Initializes the call request that we're sending to the host. + * @call: The call to initialize. + * @client_id: The client ID of the caller. + * @function: The function number of the function to call. + * @src_parm: Pointer to source function call parameters. + * @parm_count: Number of function call parameters. + * @bounce_bufs: The bouncebuffer array. + */ +static void hgcm_call_init_call( + struct vmmdev_hgcm_call *call, u32 client_id, u32 function, + const struct vmmdev_hgcm_function_parameter *src_parm, + u32 parm_count, void **bounce_bufs) +{ + struct vmmdev_hgcm_function_parameter *dst_parm = + VMMDEV_HGCM_CALL_PARMS(call); + u32 i, off_extra = (uintptr_t)(dst_parm + parm_count) - (uintptr_t)call; + void *buf; + + call->header.flags = 0; + call->header.result = VINF_SUCCESS; + call->client_id = client_id; + call->function = function; + call->parm_count = parm_count; + + for (i = 0; i < parm_count; i++, src_parm++, dst_parm++) { + switch (src_parm->type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + case VMMDEV_HGCM_PARM_TYPE_64BIT: + *dst_parm = *src_parm; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + hgcm_call_init_linaddr(call, dst_parm, bounce_bufs[i], + src_parm->u.pointer.size, + src_parm->type, &off_extra); + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT: + buf = (void *)src_parm->u.pointer.u.linear_addr; + hgcm_call_init_linaddr(call, dst_parm, buf, + src_parm->u.pointer.size, + src_parm->type, &off_extra); + break; + + default: + WARN_ON(1); + dst_parm->type = VMMDEV_HGCM_PARM_TYPE_INVALID; + } + } +} + +/** + * Tries to cancel a pending HGCM call. + * + * Return: VBox status code + */ +static int hgcm_cancel_call(struct vbg_dev *gdev, struct vmmdev_hgcm_call *call) +{ + int rc; + + /* + * We use a pre-allocated request for cancellations, which is + * protected by cancel_req_mutex. This means that all cancellations + * get serialized, this should be fine since they should be rare. + */ + mutex_lock(&gdev->cancel_req_mutex); + gdev->cancel_req->phys_req_to_cancel = virt_to_phys(call); + rc = vbg_req_perform(gdev, gdev->cancel_req); + mutex_unlock(&gdev->cancel_req_mutex); + + if (rc == VERR_NOT_IMPLEMENTED) { + call->header.flags |= VMMDEV_HGCM_REQ_CANCELLED; + call->header.header.request_type = VMMDEVREQ_HGCM_CANCEL; + + rc = vbg_req_perform(gdev, call); + if (rc == VERR_INVALID_PARAMETER) + rc = VERR_NOT_FOUND; + } + + if (rc >= 0) + call->header.flags |= VMMDEV_HGCM_REQ_CANCELLED; + + return rc; +} + +/** + * Performs the call and completion wait. + * Return: 0 or negative errno value. + * @gdev: The VBoxGuest device extension. + * @call: The call to execute. + * @timeout_ms: Timeout in ms. + * @leak_it: Where to return the leak it / free it, indicator. + * Cancellation fun. + */ +static int vbg_hgcm_do_call(struct vbg_dev *gdev, struct vmmdev_hgcm_call *call, + u32 timeout_ms, bool *leak_it) +{ + int rc, cancel_rc, ret; + long timeout; + + *leak_it = false; + + rc = vbg_req_perform(gdev, call); + + /* + * If the call failed, then pretend success. Upper layers will + * interpret the result code in the packet. + */ + if (rc < 0) { + call->header.result = rc; + return 0; + } + + if (rc != VINF_HGCM_ASYNC_EXECUTE) + return 0; + + /* Host decided to process the request asynchronously, wait for it */ + if (timeout_ms == U32_MAX) + timeout = MAX_SCHEDULE_TIMEOUT; + else + timeout = msecs_to_jiffies(timeout_ms); + + timeout = wait_event_interruptible_timeout( + gdev->hgcm_wq, + hgcm_req_done(gdev, &call->header), + timeout); + + /* timeout > 0 means hgcm_req_done has returned true, so success */ + if (timeout > 0) + return 0; + + if (timeout == 0) + ret = -ETIMEDOUT; + else + ret = -EINTR; + + /* Cancel the request */ + cancel_rc = hgcm_cancel_call(gdev, call); + if (cancel_rc >= 0) + return ret; + + /* + * Failed to cancel, this should mean that the cancel has lost the + * race with normal completion, wait while the host completes it. + */ + if (cancel_rc == VERR_NOT_FOUND || cancel_rc == VERR_SEM_DESTROYED) + timeout = msecs_to_jiffies(500); + else + timeout = msecs_to_jiffies(2000); + + timeout = wait_event_timeout(gdev->hgcm_wq, + hgcm_req_done(gdev, &call->header), + timeout); + + if (WARN_ON(timeout == 0)) { + /* We really should never get here */ + vbg_err("%s: Call timedout and cancellation failed, leaking the request\n", + __func__); + *leak_it = true; + return ret; + } + + /* The call has completed normally after all */ + return 0; +} + +/** + * Copies the result of the call back to the caller info structure and user + * buffers. + * Return: 0 or negative errno value. + * @call: HGCM call request. + * @dst_parm: Pointer to function call parameters destination. + * @parm_count: Number of function call parameters. + * @bounce_bufs: The bouncebuffer array. + */ +static int hgcm_call_copy_back_result( + const struct vmmdev_hgcm_call *call, + struct vmmdev_hgcm_function_parameter *dst_parm, + u32 parm_count, void **bounce_bufs) +{ + const struct vmmdev_hgcm_function_parameter *src_parm = + VMMDEV_HGCM_CALL_PARMS(call); + void __user *p; + int ret; + u32 i; + + /* Copy back parameters. */ + for (i = 0; i < parm_count; i++, src_parm++, dst_parm++) { + switch (dst_parm->type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + case VMMDEV_HGCM_PARM_TYPE_64BIT: + *dst_parm = *src_parm; + break; + + case VMMDEV_HGCM_PARM_TYPE_PAGELIST: + dst_parm->u.page_list.size = src_parm->u.page_list.size; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT: + dst_parm->u.pointer.size = src_parm->u.pointer.size; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + dst_parm->u.pointer.size = src_parm->u.pointer.size; + + p = (void __user *)dst_parm->u.pointer.u.linear_addr; + ret = copy_to_user(p, bounce_bufs[i], + min(src_parm->u.pointer.size, + dst_parm->u.pointer.size)); + if (ret) + return -EFAULT; + break; + + default: + WARN_ON(1); + return -EINVAL; + } + } + + return 0; +} + +int vbg_hgcm_call(struct vbg_dev *gdev, u32 client_id, u32 function, + u32 timeout_ms, struct vmmdev_hgcm_function_parameter *parms, + u32 parm_count, int *vbox_status) +{ + struct vmmdev_hgcm_call *call; + void **bounce_bufs = NULL; + bool leak_it; + size_t size; + int i, ret; + + size = sizeof(struct vmmdev_hgcm_call) + + parm_count * sizeof(struct vmmdev_hgcm_function_parameter); + /* + * Validate and buffer the parameters for the call. This also increases + * call_size with the amount of extra space needed for page lists. + */ + ret = hgcm_call_preprocess(parms, parm_count, &bounce_bufs, &size); + if (ret) { + /* Even on error bounce bufs may still have been allocated */ + goto free_bounce_bufs; + } + + call = vbg_req_alloc(size, VMMDEVREQ_HGCM_CALL); + if (!call) { + ret = -ENOMEM; + goto free_bounce_bufs; + } + + hgcm_call_init_call(call, client_id, function, parms, parm_count, + bounce_bufs); + + ret = vbg_hgcm_do_call(gdev, call, timeout_ms, &leak_it); + if (ret == 0) { + *vbox_status = call->header.result; + ret = hgcm_call_copy_back_result(call, parms, parm_count, + bounce_bufs); + } + + if (!leak_it) + kfree(call); + +free_bounce_bufs: + if (bounce_bufs) { + for (i = 0; i < parm_count; i++) + kvfree(bounce_bufs[i]); + kfree(bounce_bufs); + } + + return ret; +} +EXPORT_SYMBOL(vbg_hgcm_call); + +#ifdef CONFIG_COMPAT +int vbg_hgcm_call32( + struct vbg_dev *gdev, u32 client_id, u32 function, u32 timeout_ms, + struct vmmdev_hgcm_function_parameter32 *parm32, u32 parm_count, + int *vbox_status) +{ + struct vmmdev_hgcm_function_parameter *parm64 = NULL; + u32 i, size; + int ret = 0; + + /* KISS allocate a temporary request and convert the parameters. */ + size = parm_count * sizeof(struct vmmdev_hgcm_function_parameter); + parm64 = kzalloc(size, GFP_KERNEL); + if (!parm64) + return -ENOMEM; + + for (i = 0; i < parm_count; i++) { + switch (parm32[i].type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + parm64[i].type = VMMDEV_HGCM_PARM_TYPE_32BIT; + parm64[i].u.value32 = parm32[i].u.value32; + break; + + case VMMDEV_HGCM_PARM_TYPE_64BIT: + parm64[i].type = VMMDEV_HGCM_PARM_TYPE_64BIT; + parm64[i].u.value64 = parm32[i].u.value64; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + parm64[i].type = parm32[i].type; + parm64[i].u.pointer.size = parm32[i].u.pointer.size; + parm64[i].u.pointer.u.linear_addr = + parm32[i].u.pointer.u.linear_addr; + break; + + default: + ret = -EINVAL; + } + if (ret < 0) + goto out_free; + } + + ret = vbg_hgcm_call(gdev, client_id, function, timeout_ms, + parm64, parm_count, vbox_status); + if (ret < 0) + goto out_free; + + /* Copy back. */ + for (i = 0; i < parm_count; i++, parm32++, parm64++) { + switch (parm64[i].type) { + case VMMDEV_HGCM_PARM_TYPE_32BIT: + parm32[i].u.value32 = parm64[i].u.value32; + break; + + case VMMDEV_HGCM_PARM_TYPE_64BIT: + parm32[i].u.value64 = parm64[i].u.value64; + break; + + case VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT: + case VMMDEV_HGCM_PARM_TYPE_LINADDR: + case VMMDEV_HGCM_PARM_TYPE_LINADDR_IN: + parm32[i].u.pointer.size = parm64[i].u.pointer.size; + break; + + default: + WARN_ON(1); + ret = -EINVAL; + } + } + +out_free: + kfree(parm64); + return ret; +} +#endif + +static const int vbg_status_code_to_errno_table[] = { + [-VERR_ACCESS_DENIED] = -EPERM, + [-VERR_FILE_NOT_FOUND] = -ENOENT, + [-VERR_PROCESS_NOT_FOUND] = -ESRCH, + [-VERR_INTERRUPTED] = -EINTR, + [-VERR_DEV_IO_ERROR] = -EIO, + [-VERR_TOO_MUCH_DATA] = -E2BIG, + [-VERR_BAD_EXE_FORMAT] = -ENOEXEC, + [-VERR_INVALID_HANDLE] = -EBADF, + [-VERR_TRY_AGAIN] = -EAGAIN, + [-VERR_NO_MEMORY] = -ENOMEM, + [-VERR_INVALID_POINTER] = -EFAULT, + [-VERR_RESOURCE_BUSY] = -EBUSY, + [-VERR_ALREADY_EXISTS] = -EEXIST, + [-VERR_NOT_SAME_DEVICE] = -EXDEV, + [-VERR_NOT_A_DIRECTORY] = -ENOTDIR, + [-VERR_PATH_NOT_FOUND] = -ENOTDIR, + [-VERR_INVALID_NAME] = -ENOENT, + [-VERR_IS_A_DIRECTORY] = -EISDIR, + [-VERR_INVALID_PARAMETER] = -EINVAL, + [-VERR_TOO_MANY_OPEN_FILES] = -ENFILE, + [-VERR_INVALID_FUNCTION] = -ENOTTY, + [-VERR_SHARING_VIOLATION] = -ETXTBSY, + [-VERR_FILE_TOO_BIG] = -EFBIG, + [-VERR_DISK_FULL] = -ENOSPC, + [-VERR_SEEK_ON_DEVICE] = -ESPIPE, + [-VERR_WRITE_PROTECT] = -EROFS, + [-VERR_BROKEN_PIPE] = -EPIPE, + [-VERR_DEADLOCK] = -EDEADLK, + [-VERR_FILENAME_TOO_LONG] = -ENAMETOOLONG, + [-VERR_FILE_LOCK_FAILED] = -ENOLCK, + [-VERR_NOT_IMPLEMENTED] = -ENOSYS, + [-VERR_NOT_SUPPORTED] = -ENOSYS, + [-VERR_DIR_NOT_EMPTY] = -ENOTEMPTY, + [-VERR_TOO_MANY_SYMLINKS] = -ELOOP, + [-VERR_NO_MORE_FILES] = -ENODATA, + [-VERR_NO_DATA] = -ENODATA, + [-VERR_NET_NO_NETWORK] = -ENONET, + [-VERR_NET_NOT_UNIQUE_NAME] = -ENOTUNIQ, + [-VERR_NO_TRANSLATION] = -EILSEQ, + [-VERR_NET_NOT_SOCKET] = -ENOTSOCK, + [-VERR_NET_DEST_ADDRESS_REQUIRED] = -EDESTADDRREQ, + [-VERR_NET_MSG_SIZE] = -EMSGSIZE, + [-VERR_NET_PROTOCOL_TYPE] = -EPROTOTYPE, + [-VERR_NET_PROTOCOL_NOT_AVAILABLE] = -ENOPROTOOPT, + [-VERR_NET_PROTOCOL_NOT_SUPPORTED] = -EPROTONOSUPPORT, + [-VERR_NET_SOCKET_TYPE_NOT_SUPPORTED] = -ESOCKTNOSUPPORT, + [-VERR_NET_OPERATION_NOT_SUPPORTED] = -EOPNOTSUPP, + [-VERR_NET_PROTOCOL_FAMILY_NOT_SUPPORTED] = -EPFNOSUPPORT, + [-VERR_NET_ADDRESS_FAMILY_NOT_SUPPORTED] = -EAFNOSUPPORT, + [-VERR_NET_ADDRESS_IN_USE] = -EADDRINUSE, + [-VERR_NET_ADDRESS_NOT_AVAILABLE] = -EADDRNOTAVAIL, + [-VERR_NET_DOWN] = -ENETDOWN, + [-VERR_NET_UNREACHABLE] = -ENETUNREACH, + [-VERR_NET_CONNECTION_RESET] = -ENETRESET, + [-VERR_NET_CONNECTION_ABORTED] = -ECONNABORTED, + [-VERR_NET_CONNECTION_RESET_BY_PEER] = -ECONNRESET, + [-VERR_NET_NO_BUFFER_SPACE] = -ENOBUFS, + [-VERR_NET_ALREADY_CONNECTED] = -EISCONN, + [-VERR_NET_NOT_CONNECTED] = -ENOTCONN, + [-VERR_NET_SHUTDOWN] = -ESHUTDOWN, + [-VERR_NET_TOO_MANY_REFERENCES] = -ETOOMANYREFS, + [-VERR_TIMEOUT] = -ETIMEDOUT, + [-VERR_NET_CONNECTION_REFUSED] = -ECONNREFUSED, + [-VERR_NET_HOST_DOWN] = -EHOSTDOWN, + [-VERR_NET_HOST_UNREACHABLE] = -EHOSTUNREACH, + [-VERR_NET_ALREADY_IN_PROGRESS] = -EALREADY, + [-VERR_NET_IN_PROGRESS] = -EINPROGRESS, + [-VERR_MEDIA_NOT_PRESENT] = -ENOMEDIUM, + [-VERR_MEDIA_NOT_RECOGNIZED] = -EMEDIUMTYPE, +}; + +int vbg_status_code_to_errno(int rc) +{ + if (rc >= 0) + return 0; + + rc = -rc; + if (rc >= ARRAY_SIZE(vbg_status_code_to_errno_table) || + vbg_status_code_to_errno_table[rc] == 0) { + vbg_warn("%s: Unhandled err %d\n", __func__, -rc); + return -EPROTO; + } + + return vbg_status_code_to_errno_table[rc]; +} +EXPORT_SYMBOL(vbg_status_code_to_errno); diff --git a/drivers/virt/vboxguest/vboxguest_version.h b/drivers/virt/vboxguest/vboxguest_version.h new file mode 100644 index 000000000000..77f0c8f8a231 --- /dev/null +++ b/drivers/virt/vboxguest/vboxguest_version.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * VBox Guest additions version info, this is used by the host to determine + * supported guest-addition features in some cases. So this will need to be + * synced with vbox upstreams versioning scheme when we implement / port + * new features from the upstream out-of-tree vboxguest driver. + */ + +#ifndef __VBOX_VERSION_H__ +#define __VBOX_VERSION_H__ + +/* Last synced October 4th 2017 */ +#define VBG_VERSION_MAJOR 5 +#define VBG_VERSION_MINOR 2 +#define VBG_VERSION_BUILD 0 +#define VBG_SVN_REV 68940 +#define VBG_VERSION_STRING "5.2.0" + +#endif diff --git a/drivers/virt/vboxguest/vmmdev.h b/drivers/virt/vboxguest/vmmdev.h new file mode 100644 index 000000000000..5e2ae978935d --- /dev/null +++ b/drivers/virt/vboxguest/vmmdev.h @@ -0,0 +1,449 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * Virtual Device for Guest <-> VMM/Host communication interface + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#ifndef __VBOX_VMMDEV_H__ +#define __VBOX_VMMDEV_H__ + +#include +#include +#include +#include + +/* Port for generic request interface (relative offset). */ +#define VMMDEV_PORT_OFF_REQUEST 0 + +/** Layout of VMMDEV RAM region that contains information for guest. */ +struct vmmdev_memory { + /** The size of this structure. */ + u32 size; + /** The structure version. (VMMDEV_MEMORY_VERSION) */ + u32 version; + + union { + struct { + /** Flag telling that VMMDev has events pending. */ + u8 have_events; + /** Explicit padding, MBZ. */ + u8 padding[3]; + } V1_04; + + struct { + /** Pending events flags, set by host. */ + u32 host_events; + /** Mask of events the guest wants, set by guest. */ + u32 guest_event_mask; + } V1_03; + } V; + + /* struct vbva_memory, not used */ +}; +VMMDEV_ASSERT_SIZE(vmmdev_memory, 8 + 8); + +/** Version of vmmdev_memory structure (vmmdev_memory::version). */ +#define VMMDEV_MEMORY_VERSION (1) + +/* Host mouse capabilities has been changed. */ +#define VMMDEV_EVENT_MOUSE_CAPABILITIES_CHANGED BIT(0) +/* HGCM event. */ +#define VMMDEV_EVENT_HGCM BIT(1) +/* A display change request has been issued. */ +#define VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST BIT(2) +/* Credentials are available for judgement. */ +#define VMMDEV_EVENT_JUDGE_CREDENTIALS BIT(3) +/* The guest has been restored. */ +#define VMMDEV_EVENT_RESTORED BIT(4) +/* Seamless mode state changed. */ +#define VMMDEV_EVENT_SEAMLESS_MODE_CHANGE_REQUEST BIT(5) +/* Memory balloon size changed. */ +#define VMMDEV_EVENT_BALLOON_CHANGE_REQUEST BIT(6) +/* Statistics interval changed. */ +#define VMMDEV_EVENT_STATISTICS_INTERVAL_CHANGE_REQUEST BIT(7) +/* VRDP status changed. */ +#define VMMDEV_EVENT_VRDP BIT(8) +/* New mouse position data available. */ +#define VMMDEV_EVENT_MOUSE_POSITION_CHANGED BIT(9) +/* CPU hotplug event occurred. */ +#define VMMDEV_EVENT_CPU_HOTPLUG BIT(10) +/* The mask of valid events, for sanity checking. */ +#define VMMDEV_EVENT_VALID_EVENT_MASK 0x000007ffU + +/* + * Additions are allowed to work only if additions_major == vmmdev_current && + * additions_minor <= vmmdev_current. Additions version is reported to host + * (VMMDev) by VMMDEVREQ_REPORT_GUEST_INFO. + */ +#define VMMDEV_VERSION 0x00010004 +#define VMMDEV_VERSION_MAJOR (VMMDEV_VERSION >> 16) +#define VMMDEV_VERSION_MINOR (VMMDEV_VERSION & 0xffff) + +/* Maximum request packet size. */ +#define VMMDEV_MAX_VMMDEVREQ_SIZE 1048576 + +/* Version of vmmdev_request_header structure. */ +#define VMMDEV_REQUEST_HEADER_VERSION 0x10001 + +/** struct vmmdev_request_header - Generic VMMDev request header. */ +struct vmmdev_request_header { + /** IN: Size of the structure in bytes (including body). */ + u32 size; + /** IN: Version of the structure. */ + u32 version; + /** IN: Type of the request. */ + enum vmmdev_request_type request_type; + /** OUT: Return code. */ + s32 rc; + /** Reserved field no.1. MBZ. */ + u32 reserved1; + /** Reserved field no.2. MBZ. */ + u32 reserved2; +}; +VMMDEV_ASSERT_SIZE(vmmdev_request_header, 24); + +/** + * struct vmmdev_mouse_status - Mouse status request structure. + * + * Used by VMMDEVREQ_GET_MOUSE_STATUS and VMMDEVREQ_SET_MOUSE_STATUS. + */ +struct vmmdev_mouse_status { + /** header */ + struct vmmdev_request_header header; + /** Mouse feature mask. See VMMDEV_MOUSE_*. */ + u32 mouse_features; + /** Mouse x position. */ + s32 pointer_pos_x; + /** Mouse y position. */ + s32 pointer_pos_y; +}; +VMMDEV_ASSERT_SIZE(vmmdev_mouse_status, 24 + 12); + +/* The guest can (== wants to) handle absolute coordinates. */ +#define VMMDEV_MOUSE_GUEST_CAN_ABSOLUTE BIT(0) +/* + * The host can (== wants to) send absolute coordinates. + * (Input not captured.) + */ +#define VMMDEV_MOUSE_HOST_WANTS_ABSOLUTE BIT(1) +/* + * The guest can *NOT* switch to software cursor and therefore depends on the + * host cursor. + * + * When guest additions are installed and the host has promised to display the + * cursor itself, the guest installs a hardware mouse driver. Don't ask the + * guest to switch to a software cursor then. + */ +#define VMMDEV_MOUSE_GUEST_NEEDS_HOST_CURSOR BIT(2) +/* The host does NOT provide support for drawing the cursor itself. */ +#define VMMDEV_MOUSE_HOST_CANNOT_HWPOINTER BIT(3) +/* The guest can read VMMDev events to find out about pointer movement */ +#define VMMDEV_MOUSE_NEW_PROTOCOL BIT(4) +/* + * If the guest changes the status of the VMMDEV_MOUSE_GUEST_NEEDS_HOST_CURSOR + * bit, the host will honour this. + */ +#define VMMDEV_MOUSE_HOST_RECHECKS_NEEDS_HOST_CURSOR BIT(5) +/* + * The host supplies an absolute pointing device. The Guest Additions may + * wish to use this to decide whether to install their own driver. + */ +#define VMMDEV_MOUSE_HOST_HAS_ABS_DEV BIT(6) + +/* The minimum value our pointing device can return. */ +#define VMMDEV_MOUSE_RANGE_MIN 0 +/* The maximum value our pointing device can return. */ +#define VMMDEV_MOUSE_RANGE_MAX 0xFFFF + +/** + * struct vmmdev_host_version - VirtualBox host version request structure. + * + * VBG uses this to detect the precense of new features in the interface. + */ +struct vmmdev_host_version { + /** Header. */ + struct vmmdev_request_header header; + /** Major version. */ + u16 major; + /** Minor version. */ + u16 minor; + /** Build number. */ + u32 build; + /** SVN revision. */ + u32 revision; + /** Feature mask. */ + u32 features; +}; +VMMDEV_ASSERT_SIZE(vmmdev_host_version, 24 + 16); + +/* Physical page lists are supported by HGCM. */ +#define VMMDEV_HVF_HGCM_PHYS_PAGE_LIST BIT(0) + +/** + * struct vmmdev_mask - Structure to set / clear bits in a mask used for + * VMMDEVREQ_SET_GUEST_CAPABILITIES and VMMDEVREQ_CTL_GUEST_FILTER_MASK. + */ +struct vmmdev_mask { + /** Header. */ + struct vmmdev_request_header header; + /** Mask of bits to be set. */ + u32 or_mask; + /** Mask of bits to be cleared. */ + u32 not_mask; +}; +VMMDEV_ASSERT_SIZE(vmmdev_mask, 24 + 8); + +/* The guest supports seamless display rendering. */ +#define VMMDEV_GUEST_SUPPORTS_SEAMLESS BIT(0) +/* The guest supports mapping guest to host windows. */ +#define VMMDEV_GUEST_SUPPORTS_GUEST_HOST_WINDOW_MAPPING BIT(1) +/* + * The guest graphical additions are active. + * Used for fast activation and deactivation of certain graphical operations + * (e.g. resizing & seamless). The legacy VMMDEVREQ_REPORT_GUEST_CAPABILITIES + * request sets this automatically, but VMMDEVREQ_SET_GUEST_CAPABILITIES does + * not. + */ +#define VMMDEV_GUEST_SUPPORTS_GRAPHICS BIT(2) + +/** struct vmmdev_hypervisorinfo - Hypervisor info structure. */ +struct vmmdev_hypervisorinfo { + /** Header. */ + struct vmmdev_request_header header; + /** + * Guest virtual address of proposed hypervisor start. + * Not used by VMMDEVREQ_GET_HYPERVISOR_INFO. + */ + u32 hypervisor_start; + /** Hypervisor size in bytes. */ + u32 hypervisor_size; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hypervisorinfo, 24 + 8); + +/** struct vmmdev_events - Pending events structure. */ +struct vmmdev_events { + /** Header. */ + struct vmmdev_request_header header; + /** OUT: Pending event mask. */ + u32 events; +}; +VMMDEV_ASSERT_SIZE(vmmdev_events, 24 + 4); + +#define VMMDEV_OSTYPE_LINUX26 0x53000 +#define VMMDEV_OSTYPE_X64 BIT(8) + +/** struct vmmdev_guestinfo - Guest information report. */ +struct vmmdev_guest_info { + /** Header. */ + struct vmmdev_request_header header; + /** + * The VMMDev interface version expected by additions. + * *Deprecated*, do not use anymore! Will be removed. + */ + u32 interface_version; + /** Guest OS type. */ + u32 os_type; +}; +VMMDEV_ASSERT_SIZE(vmmdev_guest_info, 24 + 8); + +/** struct vmmdev_guestinfo2 - Guest information report, version 2. */ +struct vmmdev_guest_info2 { + /** Header. */ + struct vmmdev_request_header header; + /** Major version. */ + u16 additions_major; + /** Minor version. */ + u16 additions_minor; + /** Build number. */ + u32 additions_build; + /** SVN revision. */ + u32 additions_revision; + /** Feature mask, currently unused. */ + u32 additions_features; + /** + * The intentional meaning of this field was: + * Some additional information, for example 'Beta 1' or something like + * that. + * + * The way it was implemented was implemented: VBG_VERSION_STRING. + * + * This means the first three members are duplicated in this field (if + * the guest build config is sane). So, the user must check this and + * chop it off before usage. There is, because of the Main code's blind + * trust in the field's content, no way back. + */ + char name[128]; +}; +VMMDEV_ASSERT_SIZE(vmmdev_guest_info2, 24 + 144); + +enum vmmdev_guest_facility_type { + VBOXGUEST_FACILITY_TYPE_UNKNOWN = 0, + VBOXGUEST_FACILITY_TYPE_VBOXGUEST_DRIVER = 20, + /* VBoxGINA / VBoxCredProv / pam_vbox. */ + VBOXGUEST_FACILITY_TYPE_AUTO_LOGON = 90, + VBOXGUEST_FACILITY_TYPE_VBOX_SERVICE = 100, + /* VBoxTray (Windows), VBoxClient (Linux, Unix). */ + VBOXGUEST_FACILITY_TYPE_VBOX_TRAY_CLIENT = 101, + VBOXGUEST_FACILITY_TYPE_SEAMLESS = 1000, + VBOXGUEST_FACILITY_TYPE_GRAPHICS = 1100, + VBOXGUEST_FACILITY_TYPE_ALL = 0x7ffffffe, + /* Ensure the enum is a 32 bit data-type */ + VBOXGUEST_FACILITY_TYPE_SIZEHACK = 0x7fffffff +}; + +enum vmmdev_guest_facility_status { + VBOXGUEST_FACILITY_STATUS_INACTIVE = 0, + VBOXGUEST_FACILITY_STATUS_PAUSED = 1, + VBOXGUEST_FACILITY_STATUS_PRE_INIT = 20, + VBOXGUEST_FACILITY_STATUS_INIT = 30, + VBOXGUEST_FACILITY_STATUS_ACTIVE = 50, + VBOXGUEST_FACILITY_STATUS_TERMINATING = 100, + VBOXGUEST_FACILITY_STATUS_TERMINATED = 101, + VBOXGUEST_FACILITY_STATUS_FAILED = 800, + VBOXGUEST_FACILITY_STATUS_UNKNOWN = 999, + /* Ensure the enum is a 32 bit data-type */ + VBOXGUEST_FACILITY_STATUS_SIZEHACK = 0x7fffffff +}; + +/** struct vmmdev_guest_status - Guest Additions status structure. */ +struct vmmdev_guest_status { + /** Header. */ + struct vmmdev_request_header header; + /** Facility the status is indicated for. */ + enum vmmdev_guest_facility_type facility; + /** Current guest status. */ + enum vmmdev_guest_facility_status status; + /** Flags, not used at the moment. */ + u32 flags; +}; +VMMDEV_ASSERT_SIZE(vmmdev_guest_status, 24 + 12); + +#define VMMDEV_MEMORY_BALLOON_CHUNK_SIZE (1048576) +#define VMMDEV_MEMORY_BALLOON_CHUNK_PAGES (1048576 / 4096) + +/** struct vmmdev_memballoon_info - Memory-balloon info structure. */ +struct vmmdev_memballoon_info { + /** Header. */ + struct vmmdev_request_header header; + /** Balloon size in megabytes. */ + u32 balloon_chunks; + /** Guest ram size in megabytes. */ + u32 phys_mem_chunks; + /** + * Setting this to VMMDEV_EVENT_BALLOON_CHANGE_REQUEST indicates that + * the request is a response to that event. + * (Don't confuse this with VMMDEVREQ_ACKNOWLEDGE_EVENTS.) + */ + u32 event_ack; +}; +VMMDEV_ASSERT_SIZE(vmmdev_memballoon_info, 24 + 12); + +/** struct vmmdev_memballoon_change - Change the size of the balloon. */ +struct vmmdev_memballoon_change { + /** Header. */ + struct vmmdev_request_header header; + /** The number of pages in the array. */ + u32 pages; + /** true = inflate, false = deflate. */ + u32 inflate; + /** Physical address (u64) of each page. */ + u64 phys_page[VMMDEV_MEMORY_BALLOON_CHUNK_PAGES]; +}; + +/** struct vmmdev_write_core_dump - Write Core Dump request data. */ +struct vmmdev_write_core_dump { + /** Header. */ + struct vmmdev_request_header header; + /** Flags (reserved, MBZ). */ + u32 flags; +}; +VMMDEV_ASSERT_SIZE(vmmdev_write_core_dump, 24 + 4); + +/** struct vmmdev_heartbeat - Heart beat check state structure. */ +struct vmmdev_heartbeat { + /** Header. */ + struct vmmdev_request_header header; + /** OUT: Guest heartbeat interval in nanosec. */ + u64 interval_ns; + /** Heartbeat check flag. */ + u8 enabled; + /** Explicit padding, MBZ. */ + u8 padding[3]; +} __packed; +VMMDEV_ASSERT_SIZE(vmmdev_heartbeat, 24 + 12); + +#define VMMDEV_HGCM_REQ_DONE BIT(0) +#define VMMDEV_HGCM_REQ_CANCELLED BIT(1) + +/** struct vmmdev_hgcmreq_header - vmmdev HGCM requests header. */ +struct vmmdev_hgcmreq_header { + /** Request header. */ + struct vmmdev_request_header header; + + /** HGCM flags. */ + u32 flags; + + /** Result code. */ + s32 result; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcmreq_header, 24 + 8); + +/** struct vmmdev_hgcm_connect - HGCM connect request structure. */ +struct vmmdev_hgcm_connect { + /** HGCM request header. */ + struct vmmdev_hgcmreq_header header; + + /** IN: Description of service to connect to. */ + struct vmmdev_hgcm_service_location loc; + + /** OUT: Client identifier assigned by local instance of HGCM. */ + u32 client_id; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_connect, 32 + 132 + 4); + +/** struct vmmdev_hgcm_disconnect - HGCM disconnect request structure. */ +struct vmmdev_hgcm_disconnect { + /** HGCM request header. */ + struct vmmdev_hgcmreq_header header; + + /** IN: Client identifier. */ + u32 client_id; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_disconnect, 32 + 4); + +#define VMMDEV_HGCM_MAX_PARMS 32 + +/** struct vmmdev_hgcm_call - HGCM call request structure. */ +struct vmmdev_hgcm_call { + /* request header */ + struct vmmdev_hgcmreq_header header; + + /** IN: Client identifier. */ + u32 client_id; + /** IN: Service function number. */ + u32 function; + /** IN: Number of parameters. */ + u32 parm_count; + /** Parameters follow in form: HGCMFunctionParameter32|64 parms[X]; */ +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_call, 32 + 12); + +/** + * struct vmmdev_hgcm_cancel2 - HGCM cancel request structure, version 2. + * + * After the request header.rc will be: + * + * VINF_SUCCESS when cancelled. + * VERR_NOT_FOUND if the specified request cannot be found. + * VERR_INVALID_PARAMETER if the address is invalid valid. + */ +struct vmmdev_hgcm_cancel2 { + /** Header. */ + struct vmmdev_request_header header; + /** The physical address of the request to cancel. */ + u32 phys_req_to_cancel; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_cancel2, 24 + 4); + +#endif diff --git a/drivers/vme/vme.c b/drivers/vme/vme.c index 81246221a13b..92500f6bdad1 100644 --- a/drivers/vme/vme.c +++ b/drivers/vme/vme.c @@ -1290,7 +1290,7 @@ struct vme_error_handler *vme_register_error_handler( { struct vme_error_handler *handler; - handler = kmalloc(sizeof(*handler), GFP_KERNEL); + handler = kmalloc(sizeof(*handler), GFP_ATOMIC); if (!handler) return NULL; diff --git a/include/linux/fpga/fpga-bridge.h b/include/linux/fpga/fpga-bridge.h index aa66c87c120b..3694821a6d2d 100644 --- a/include/linux/fpga/fpga-bridge.h +++ b/include/linux/fpga/fpga-bridge.h @@ -1,10 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#include -#include #ifndef _LINUX_FPGA_BRIDGE_H #define _LINUX_FPGA_BRIDGE_H +#include +#include + struct fpga_bridge; /** @@ -12,11 +13,13 @@ struct fpga_bridge; * @enable_show: returns the FPGA bridge's status * @enable_set: set a FPGA bridge as enabled or disabled * @fpga_bridge_remove: set FPGA into a specific state during driver remove + * @groups: optional attribute groups. */ struct fpga_bridge_ops { int (*enable_show)(struct fpga_bridge *bridge); int (*enable_set)(struct fpga_bridge *bridge, bool enable); void (*fpga_bridge_remove)(struct fpga_bridge *bridge); + const struct attribute_group **groups; }; /** @@ -43,6 +46,8 @@ struct fpga_bridge { struct fpga_bridge *of_fpga_bridge_get(struct device_node *node, struct fpga_image_info *info); +struct fpga_bridge *fpga_bridge_get(struct device *dev, + struct fpga_image_info *info); void fpga_bridge_put(struct fpga_bridge *bridge); int fpga_bridge_enable(struct fpga_bridge *bridge); int fpga_bridge_disable(struct fpga_bridge *bridge); @@ -50,9 +55,12 @@ int fpga_bridge_disable(struct fpga_bridge *bridge); int fpga_bridges_enable(struct list_head *bridge_list); int fpga_bridges_disable(struct list_head *bridge_list); void fpga_bridges_put(struct list_head *bridge_list); -int fpga_bridge_get_to_list(struct device_node *np, +int fpga_bridge_get_to_list(struct device *dev, struct fpga_image_info *info, struct list_head *bridge_list); +int of_fpga_bridge_get_to_list(struct device_node *np, + struct fpga_image_info *info, + struct list_head *bridge_list); int fpga_bridge_register(struct device *dev, const char *name, const struct fpga_bridge_ops *br_ops, void *priv); diff --git a/include/linux/fpga/fpga-mgr.h b/include/linux/fpga/fpga-mgr.h index bfa14bc023fb..3c6de23aabdf 100644 --- a/include/linux/fpga/fpga-mgr.h +++ b/include/linux/fpga/fpga-mgr.h @@ -1,7 +1,8 @@ /* * FPGA Framework * - * Copyright (C) 2013-2015 Altera Corporation + * Copyright (C) 2013-2016 Altera Corporation + * Copyright (C) 2017 Intel Corporation * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -15,12 +16,12 @@ * You should have received a copy of the GNU General Public License along with * this program. If not, see . */ -#include -#include - #ifndef _LINUX_FPGA_MGR_H #define _LINUX_FPGA_MGR_H +#include +#include + struct fpga_manager; struct sg_table; @@ -83,12 +84,26 @@ enum fpga_mgr_states { * @disable_timeout_us: maximum time to disable traffic through bridge (uSec) * @config_complete_timeout_us: maximum time for FPGA to switch to operating * status in the write_complete op. + * @firmware_name: name of FPGA image firmware file + * @sgt: scatter/gather table containing FPGA image + * @buf: contiguous buffer containing FPGA image + * @count: size of buf + * @dev: device that owns this + * @overlay: Device Tree overlay */ struct fpga_image_info { u32 flags; u32 enable_timeout_us; u32 disable_timeout_us; u32 config_complete_timeout_us; + char *firmware_name; + struct sg_table *sgt; + const char *buf; + size_t count; + struct device *dev; +#ifdef CONFIG_OF + struct device_node *overlay; +#endif }; /** @@ -100,6 +115,7 @@ struct fpga_image_info { * @write_sg: write the scatter list of configuration data to the FPGA * @write_complete: set FPGA to operating state after writing is done * @fpga_remove: optional: Set FPGA into a specific state during driver remove + * @groups: optional attribute groups. * * fpga_manager_ops are the low level functions implemented by a specific * fpga manager driver. The optional ones are tested for NULL before being @@ -116,6 +132,7 @@ struct fpga_manager_ops { int (*write_complete)(struct fpga_manager *mgr, struct fpga_image_info *info); void (*fpga_remove)(struct fpga_manager *mgr); + const struct attribute_group **groups; }; /** @@ -138,14 +155,14 @@ struct fpga_manager { #define to_fpga_manager(d) container_of(d, struct fpga_manager, dev) -int fpga_mgr_buf_load(struct fpga_manager *mgr, struct fpga_image_info *info, - const char *buf, size_t count); -int fpga_mgr_buf_load_sg(struct fpga_manager *mgr, struct fpga_image_info *info, - struct sg_table *sgt); +struct fpga_image_info *fpga_image_info_alloc(struct device *dev); -int fpga_mgr_firmware_load(struct fpga_manager *mgr, - struct fpga_image_info *info, - const char *image_name); +void fpga_image_info_free(struct fpga_image_info *info); + +int fpga_mgr_load(struct fpga_manager *mgr, struct fpga_image_info *info); + +int fpga_mgr_lock(struct fpga_manager *mgr); +void fpga_mgr_unlock(struct fpga_manager *mgr); struct fpga_manager *of_fpga_mgr_get(struct device_node *node); diff --git a/include/linux/fpga/fpga-region.h b/include/linux/fpga/fpga-region.h new file mode 100644 index 000000000000..b6520318ab9c --- /dev/null +++ b/include/linux/fpga/fpga-region.h @@ -0,0 +1,40 @@ +#ifndef _FPGA_REGION_H +#define _FPGA_REGION_H + +#include +#include +#include + +/** + * struct fpga_region - FPGA Region structure + * @dev: FPGA Region device + * @mutex: enforces exclusive reference to region + * @bridge_list: list of FPGA bridges specified in region + * @mgr: FPGA manager + * @info: FPGA image info + * @priv: private data + * @get_bridges: optional function to get bridges to a list + * @groups: optional attribute groups. + */ +struct fpga_region { + struct device dev; + struct mutex mutex; /* for exclusive reference to region */ + struct list_head bridge_list; + struct fpga_manager *mgr; + struct fpga_image_info *info; + void *priv; + int (*get_bridges)(struct fpga_region *region); + const struct attribute_group **groups; +}; + +#define to_fpga_region(d) container_of(d, struct fpga_region, dev) + +struct fpga_region *fpga_region_class_find( + struct device *start, const void *data, + int (*match)(struct device *, const void *)); + +int fpga_region_program_fpga(struct fpga_region *region); +int fpga_region_register(struct device *dev, struct fpga_region *region); +int fpga_region_unregister(struct fpga_region *region); + +#endif /* _FPGA_REGION_H */ diff --git a/include/linux/i7300_idle.h b/include/linux/i7300_idle.h deleted file mode 100644 index 4dbe651f71f5..000000000000 --- a/include/linux/i7300_idle.h +++ /dev/null @@ -1,84 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ - -#ifndef I7300_IDLE_H -#define I7300_IDLE_H - -#include - -/* - * I/O AT controls (PCI bus 0 device 8 function 0) - * DIMM controls (PCI bus 0 device 16 function 1) - */ -#define IOAT_BUS 0 -#define IOAT_DEVFN PCI_DEVFN(8, 0) -#define MEMCTL_BUS 0 -#define MEMCTL_DEVFN PCI_DEVFN(16, 1) - -struct fbd_ioat { - unsigned int vendor; - unsigned int ioat_dev; - unsigned int enabled; -}; - -/* - * The i5000 chip-set has the same hooks as the i7300 - * but it is not enabled by default and must be manually - * manually enabled with "forceload=1" because it is - * only lightly validated. - */ - -static const struct fbd_ioat fbd_ioat_list[] = { - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1}, - {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0}, - {0, 0} -}; - -/* table of devices that work with this driver */ -static const struct pci_device_id pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) }, - { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) }, - { } /* Terminating entry */ -}; - -/* Check for known platforms with I/O-AT */ -static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev, - struct pci_dev **ioat_dev, - int enable_all) -{ - int i; - struct pci_dev *memdev, *dmadev; - - memdev = pci_get_bus_and_slot(MEMCTL_BUS, MEMCTL_DEVFN); - if (!memdev) - return -ENODEV; - - for (i = 0; pci_tbl[i].vendor != 0; i++) { - if (memdev->vendor == pci_tbl[i].vendor && - memdev->device == pci_tbl[i].device) { - break; - } - } - if (pci_tbl[i].vendor == 0) - return -ENODEV; - - dmadev = pci_get_bus_and_slot(IOAT_BUS, IOAT_DEVFN); - if (!dmadev) - return -ENODEV; - - for (i = 0; fbd_ioat_list[i].vendor != 0; i++) { - if (dmadev->vendor == fbd_ioat_list[i].vendor && - dmadev->device == fbd_ioat_list[i].ioat_dev) { - if (!(fbd_ioat_list[i].enabled || enable_all)) - continue; - if (fbd_dev) - *fbd_dev = memdev; - if (ioat_dev) - *ioat_dev = dmadev; - - return 0; - } - } - return -ENODEV; -} - -#endif diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index abb6dc2ebbf8..48fb2b43c35a 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -229,6 +229,12 @@ struct hda_device_id { unsigned long driver_data; }; +struct sdw_device_id { + __u16 mfg_id; + __u16 part_id; + kernel_ulong_t driver_data; +}; + /* * Struct used for matching a device */ @@ -452,6 +458,19 @@ struct spi_device_id { kernel_ulong_t driver_data; /* Data private to the driver */ }; +/* SLIMbus */ + +#define SLIMBUS_NAME_SIZE 32 +#define SLIMBUS_MODULE_PREFIX "slim:" + +struct slim_device_id { + __u16 manf_id, prod_code; + __u16 dev_index, instance; + + /* Data private to the driver */ + kernel_ulong_t driver_data; +}; + #define SPMI_NAME_SIZE 32 #define SPMI_MODULE_PREFIX "spmi:" diff --git a/include/linux/mux/consumer.h b/include/linux/mux/consumer.h index ea96d4c82be7..5fc6bb2fefad 100644 --- a/include/linux/mux/consumer.h +++ b/include/linux/mux/consumer.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * mux/consumer.h - definitions for the multiplexer consumer interface * * Copyright (C) 2017 Axentia Technologies AB * * Author: Peter Rosin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _LINUX_MUX_CONSUMER_H diff --git a/include/linux/mux/driver.h b/include/linux/mux/driver.h index 35c3579c3304..627a2c6bc02d 100644 --- a/include/linux/mux/driver.h +++ b/include/linux/mux/driver.h @@ -1,13 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * mux/driver.h - definitions for the multiplexer driver interface * * Copyright (C) 2017 Axentia Technologies AB * * Author: Peter Rosin - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. */ #ifndef _LINUX_MUX_DRIVER_H diff --git a/include/linux/regmap.h b/include/linux/regmap.h index 20268b7d5001..6a3aeba40e9e 100644 --- a/include/linux/regmap.h +++ b/include/linux/regmap.h @@ -24,6 +24,7 @@ struct module; struct device; struct i2c_client; struct irq_domain; +struct slim_device; struct spi_device; struct spmi_device; struct regmap; @@ -511,6 +512,10 @@ struct regmap *__regmap_init_i2c(struct i2c_client *i2c, const struct regmap_config *config, struct lock_class_key *lock_key, const char *lock_name); +struct regmap *__regmap_init_slimbus(struct slim_device *slimbus, + const struct regmap_config *config, + struct lock_class_key *lock_key, + const char *lock_name); struct regmap *__regmap_init_spi(struct spi_device *dev, const struct regmap_config *config, struct lock_class_key *lock_key, @@ -635,6 +640,19 @@ int regmap_attach_dev(struct device *dev, struct regmap *map, __regmap_lockdep_wrapper(__regmap_init_i2c, #config, \ i2c, config) +/** + * regmap_init_slimbus() - Initialise register map + * + * @slimbus: Device that will be interacted with + * @config: Configuration for register map + * + * The return value will be an ERR_PTR() on error or a valid pointer to + * a struct regmap. + */ +#define regmap_init_slimbus(slimbus, config) \ + __regmap_lockdep_wrapper(__regmap_init_slimbus, #config, \ + slimbus, config) + /** * regmap_init_spi() - Initialise register map * diff --git a/include/linux/siox.h b/include/linux/siox.h new file mode 100644 index 000000000000..d79624e83134 --- /dev/null +++ b/include/linux/siox.h @@ -0,0 +1,77 @@ +/* + * Copyright (C) 2015 Pengutronix, Uwe Kleine-König + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ + +#include + +#define to_siox_device(_dev) container_of((_dev), struct siox_device, dev) +struct siox_device { + struct list_head node; /* node in smaster->devices */ + struct siox_master *smaster; + struct device dev; + + const char *type; + size_t inbytes; + size_t outbytes; + u8 statustype; + + u8 status_read_clean; + u8 status_written; + u8 status_written_lastcycle; + bool connected; + + /* statistics */ + unsigned int watchdog_errors; + unsigned int status_errors; + + struct kernfs_node *status_errors_kn; + struct kernfs_node *watchdog_kn; + struct kernfs_node *watchdog_errors_kn; + struct kernfs_node *connected_kn; +}; + +bool siox_device_synced(struct siox_device *sdevice); +bool siox_device_connected(struct siox_device *sdevice); + +struct siox_driver { + int (*probe)(struct siox_device *sdevice); + int (*remove)(struct siox_device *sdevice); + void (*shutdown)(struct siox_device *sdevice); + + /* + * buf is big enough to hold sdev->inbytes - 1 bytes, the status byte + * is in the scope of the framework. + */ + int (*set_data)(struct siox_device *sdevice, u8 status, u8 buf[]); + /* + * buf is big enough to hold sdev->outbytes - 1 bytes, the status byte + * is in the scope of the framework + */ + int (*get_data)(struct siox_device *sdevice, const u8 buf[]); + + struct device_driver driver; +}; + +static inline struct siox_driver *to_siox_driver(struct device_driver *driver) +{ + if (driver) + return container_of(driver, struct siox_driver, driver); + else + return NULL; +} + +int __siox_driver_register(struct siox_driver *sdriver, struct module *owner); + +static inline int siox_driver_register(struct siox_driver *sdriver) +{ + return __siox_driver_register(sdriver, THIS_MODULE); +} + +static inline void siox_driver_unregister(struct siox_driver *sdriver) +{ + return driver_unregister(&sdriver->driver); +} diff --git a/include/linux/slimbus.h b/include/linux/slimbus.h new file mode 100644 index 000000000000..c36cf121d2cd --- /dev/null +++ b/include/linux/slimbus.h @@ -0,0 +1,164 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2011-2017, The Linux Foundation + */ + +#ifndef _LINUX_SLIMBUS_H +#define _LINUX_SLIMBUS_H +#include +#include +#include +#include + +extern struct bus_type slimbus_bus; + +/** + * struct slim_eaddr - Enumeration address for a SLIMbus device + * @manf_id: Manufacturer Id for the device + * @prod_code: Product code + * @dev_index: Device index + * @instance: Instance value + */ +struct slim_eaddr { + u16 manf_id; + u16 prod_code; + u8 dev_index; + u8 instance; +} __packed; + +/** + * enum slim_device_status - slim device status + * @SLIM_DEVICE_STATUS_DOWN: Slim device is absent or not reported yet. + * @SLIM_DEVICE_STATUS_UP: Slim device is announced on the bus. + * @SLIM_DEVICE_STATUS_RESERVED: Reserved for future use. + */ +enum slim_device_status { + SLIM_DEVICE_STATUS_DOWN = 0, + SLIM_DEVICE_STATUS_UP, + SLIM_DEVICE_STATUS_RESERVED, +}; + +struct slim_controller; + +/** + * struct slim_device - Slim device handle. + * @dev: Driver model representation of the device. + * @e_addr: Enumeration address of this device. + * @status: slim device status + * @ctrl: slim controller instance. + * @laddr: 1-byte Logical address of this device. + * @is_laddr_valid: indicates if the laddr is valid or not + * + * This is the client/device handle returned when a SLIMbus + * device is registered with a controller. + * Pointer to this structure is used by client-driver as a handle. + */ +struct slim_device { + struct device dev; + struct slim_eaddr e_addr; + struct slim_controller *ctrl; + enum slim_device_status status; + u8 laddr; + bool is_laddr_valid; +}; + +#define to_slim_device(d) container_of(d, struct slim_device, dev) + +/** + * struct slim_driver - SLIMbus 'generic device' (slave) device driver + * (similar to 'spi_device' on SPI) + * @probe: Binds this driver to a SLIMbus device. + * @remove: Unbinds this driver from the SLIMbus device. + * @shutdown: Standard shutdown callback used during powerdown/halt. + * @device_status: This callback is called when + * - The device reports present and gets a laddr assigned + * - The device reports absent, or the bus goes down. + * @driver: SLIMbus device drivers should initialize name and owner field of + * this structure + * @id_table: List of SLIMbus devices supported by this driver + */ + +struct slim_driver { + int (*probe)(struct slim_device *sl); + void (*remove)(struct slim_device *sl); + void (*shutdown)(struct slim_device *sl); + int (*device_status)(struct slim_device *sl, + enum slim_device_status s); + struct device_driver driver; + const struct slim_device_id *id_table; +}; +#define to_slim_driver(d) container_of(d, struct slim_driver, driver) + +/** + * struct slim_val_inf - Slimbus value or information element + * @start_offset: Specifies starting offset in information/value element map + * @rbuf: buffer to read the values + * @wbuf: buffer to write + * @num_bytes: upto 16. This ensures that the message will fit the slicesize + * per SLIMbus spec + * @comp: completion for asynchronous operations, valid only if TID is + * required for transaction, like REQUEST operations. + * Rest of the transactions are synchronous anyway. + */ +struct slim_val_inf { + u16 start_offset; + u8 num_bytes; + u8 *rbuf; + const u8 *wbuf; + struct completion *comp; +}; + +/* + * use a macro to avoid include chaining to get THIS_MODULE + */ +#define slim_driver_register(drv) \ + __slim_driver_register(drv, THIS_MODULE) +int __slim_driver_register(struct slim_driver *drv, struct module *owner); +void slim_driver_unregister(struct slim_driver *drv); + +/** + * module_slim_driver() - Helper macro for registering a SLIMbus driver + * @__slim_driver: slimbus_driver struct + * + * Helper macro for SLIMbus drivers which do not do anything special in module + * init/exit. This eliminates a lot of boilerplate. Each module may only + * use this macro once, and calling it replaces module_init() and module_exit() + */ +#define module_slim_driver(__slim_driver) \ + module_driver(__slim_driver, slim_driver_register, \ + slim_driver_unregister) + +static inline void *slim_get_devicedata(const struct slim_device *dev) +{ + return dev_get_drvdata(&dev->dev); +} + +static inline void slim_set_devicedata(struct slim_device *dev, void *data) +{ + dev_set_drvdata(&dev->dev, data); +} + +struct slim_device *slim_get_device(struct slim_controller *ctrl, + struct slim_eaddr *e_addr); +int slim_get_logical_addr(struct slim_device *sbdev); + +/* Information Element management messages */ +#define SLIM_MSG_MC_REQUEST_INFORMATION 0x20 +#define SLIM_MSG_MC_REQUEST_CLEAR_INFORMATION 0x21 +#define SLIM_MSG_MC_REPLY_INFORMATION 0x24 +#define SLIM_MSG_MC_CLEAR_INFORMATION 0x28 +#define SLIM_MSG_MC_REPORT_INFORMATION 0x29 + +/* Value Element management messages */ +#define SLIM_MSG_MC_REQUEST_VALUE 0x60 +#define SLIM_MSG_MC_REQUEST_CHANGE_VALUE 0x61 +#define SLIM_MSG_MC_REPLY_VALUE 0x64 +#define SLIM_MSG_MC_CHANGE_VALUE 0x68 + +int slim_xfer_msg(struct slim_device *sbdev, struct slim_val_inf *msg, + u8 mc); +int slim_readb(struct slim_device *sdev, u32 addr); +int slim_writeb(struct slim_device *sdev, u32 addr, u8 value); +int slim_read(struct slim_device *sdev, u32 addr, size_t count, u8 *val); +int slim_write(struct slim_device *sdev, u32 addr, size_t count, u8 *val); +#endif /* _LINUX_SLIMBUS_H */ diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h new file mode 100644 index 000000000000..e91fdcf41049 --- /dev/null +++ b/include/linux/soundwire/sdw.h @@ -0,0 +1,479 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SOUNDWIRE_H +#define __SOUNDWIRE_H + +struct sdw_bus; +struct sdw_slave; + +/* SDW spec defines and enums, as defined by MIPI 1.1. Spec */ + +/* SDW Broadcast Device Number */ +#define SDW_BROADCAST_DEV_NUM 15 + +/* SDW Enumeration Device Number */ +#define SDW_ENUM_DEV_NUM 0 + +/* SDW Group Device Numbers */ +#define SDW_GROUP12_DEV_NUM 12 +#define SDW_GROUP13_DEV_NUM 13 + +/* SDW Master Device Number, not supported yet */ +#define SDW_MASTER_DEV_NUM 14 + +#define SDW_NUM_DEV_ID_REGISTERS 6 + +#define SDW_MAX_DEVICES 11 + +/** + * enum sdw_slave_status - Slave status + * @SDW_SLAVE_UNATTACHED: Slave is not attached with the bus. + * @SDW_SLAVE_ATTACHED: Slave is attached with bus. + * @SDW_SLAVE_ALERT: Some alert condition on the Slave + * @SDW_SLAVE_RESERVED: Reserved for future use + */ +enum sdw_slave_status { + SDW_SLAVE_UNATTACHED = 0, + SDW_SLAVE_ATTACHED = 1, + SDW_SLAVE_ALERT = 2, + SDW_SLAVE_RESERVED = 3, +}; + +/** + * enum sdw_command_response - Command response as defined by SDW spec + * @SDW_CMD_OK: cmd was successful + * @SDW_CMD_IGNORED: cmd was ignored + * @SDW_CMD_FAIL: cmd was NACKed + * @SDW_CMD_TIMEOUT: cmd timedout + * @SDW_CMD_FAIL_OTHER: cmd failed due to other reason than above + * + * NOTE: The enum is different than actual Spec as response in the Spec is + * combination of ACK/NAK bits + * + * SDW_CMD_TIMEOUT/FAIL_OTHER is defined for SW use, not in spec + */ +enum sdw_command_response { + SDW_CMD_OK = 0, + SDW_CMD_IGNORED = 1, + SDW_CMD_FAIL = 2, + SDW_CMD_TIMEOUT = 3, + SDW_CMD_FAIL_OTHER = 4, +}; + +/* + * SDW properties, defined in MIPI DisCo spec v1.0 + */ +enum sdw_clk_stop_reset_behave { + SDW_CLK_STOP_KEEP_STATUS = 1, +}; + +/** + * enum sdw_p15_behave - Slave Port 15 behaviour when the Master attempts a + * read + * @SDW_P15_READ_IGNORED: Read is ignored + * @SDW_P15_CMD_OK: Command is ok + */ +enum sdw_p15_behave { + SDW_P15_READ_IGNORED = 0, + SDW_P15_CMD_OK = 1, +}; + +/** + * enum sdw_dpn_type - Data port types + * @SDW_DPN_FULL: Full Data Port is supported + * @SDW_DPN_SIMPLE: Simplified Data Port as defined in spec. + * DPN_SampleCtrl2, DPN_OffsetCtrl2, DPN_HCtrl and DPN_BlockCtrl3 + * are not implemented. + * @SDW_DPN_REDUCED: Reduced Data Port as defined in spec. + * DPN_SampleCtrl2, DPN_HCtrl are not implemented. + */ +enum sdw_dpn_type { + SDW_DPN_FULL = 0, + SDW_DPN_SIMPLE = 1, + SDW_DPN_REDUCED = 2, +}; + +/** + * enum sdw_clk_stop_mode - Clock Stop modes + * @SDW_CLK_STOP_MODE0: Slave can continue operation seamlessly on clock + * restart + * @SDW_CLK_STOP_MODE1: Slave may have entered a deeper power-saving mode, + * not capable of continuing operation seamlessly when the clock restarts + */ +enum sdw_clk_stop_mode { + SDW_CLK_STOP_MODE0 = 0, + SDW_CLK_STOP_MODE1 = 1, +}; + +/** + * struct sdw_dp0_prop - DP0 properties + * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64 + * (inclusive) + * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64 + * (inclusive) + * @num_words: number of wordlengths supported + * @words: wordlengths supported + * @flow_controlled: Slave implementation results in an OK_NotReady + * response + * @simple_ch_prep_sm: If channel prepare sequence is required + * @device_interrupts: If implementation-defined interrupts are supported + * + * The wordlengths are specified by Spec as max, min AND number of + * discrete values, implementation can define based on the wordlengths they + * support + */ +struct sdw_dp0_prop { + u32 max_word; + u32 min_word; + u32 num_words; + u32 *words; + bool flow_controlled; + bool simple_ch_prep_sm; + bool device_interrupts; +}; + +/** + * struct sdw_dpn_audio_mode - Audio mode properties for DPn + * @bus_min_freq: Minimum bus frequency, in Hz + * @bus_max_freq: Maximum bus frequency, in Hz + * @bus_num_freq: Number of discrete frequencies supported + * @bus_freq: Discrete bus frequencies, in Hz + * @min_freq: Minimum sampling frequency, in Hz + * @max_freq: Maximum sampling bus frequency, in Hz + * @num_freq: Number of discrete sampling frequency supported + * @freq: Discrete sampling frequencies, in Hz + * @prep_ch_behave: Specifies the dependencies between Channel Prepare + * sequence and bus clock configuration + * If 0, Channel Prepare can happen at any Bus clock rate + * If 1, Channel Prepare sequence shall happen only after Bus clock is + * changed to a frequency supported by this mode or compatible modes + * described by the next field + * @glitchless: Bitmap describing possible glitchless transitions from this + * Audio Mode to other Audio Modes + */ +struct sdw_dpn_audio_mode { + u32 bus_min_freq; + u32 bus_max_freq; + u32 bus_num_freq; + u32 *bus_freq; + u32 max_freq; + u32 min_freq; + u32 num_freq; + u32 *freq; + u32 prep_ch_behave; + u32 glitchless; +}; + +/** + * struct sdw_dpn_prop - Data Port DPn properties + * @num: port number + * @max_word: Maximum number of bits in a Payload Channel Sample, 1 to 64 + * (inclusive) + * @min_word: Minimum number of bits in a Payload Channel Sample, 1 to 64 + * (inclusive) + * @num_words: Number of discrete supported wordlengths + * @words: Discrete supported wordlength + * @type: Data port type. Full, Simplified or Reduced + * @max_grouping: Maximum number of samples that can be grouped together for + * a full data port + * @simple_ch_prep_sm: If the port supports simplified channel prepare state + * machine + * @ch_prep_timeout: Port-specific timeout value, in milliseconds + * @device_interrupts: If set, each bit corresponds to support for + * implementation-defined interrupts + * @max_ch: Maximum channels supported + * @min_ch: Minimum channels supported + * @num_ch: Number of discrete channels supported + * @ch: Discrete channels supported + * @num_ch_combinations: Number of channel combinations supported + * @ch_combinations: Channel combinations supported + * @modes: SDW mode supported + * @max_async_buffer: Number of samples that this port can buffer in + * asynchronous modes + * @block_pack_mode: Type of block port mode supported + * @port_encoding: Payload Channel Sample encoding schemes supported + * @audio_modes: Audio modes supported + */ +struct sdw_dpn_prop { + u32 num; + u32 max_word; + u32 min_word; + u32 num_words; + u32 *words; + enum sdw_dpn_type type; + u32 max_grouping; + bool simple_ch_prep_sm; + u32 ch_prep_timeout; + u32 device_interrupts; + u32 max_ch; + u32 min_ch; + u32 num_ch; + u32 *ch; + u32 num_ch_combinations; + u32 *ch_combinations; + u32 modes; + u32 max_async_buffer; + bool block_pack_mode; + u32 port_encoding; + struct sdw_dpn_audio_mode *audio_modes; +}; + +/** + * struct sdw_slave_prop - SoundWire Slave properties + * @mipi_revision: Spec version of the implementation + * @wake_capable: Wake-up events are supported + * @test_mode_capable: If test mode is supported + * @clk_stop_mode1: Clock-Stop Mode 1 is supported + * @simple_clk_stop_capable: Simple clock mode is supported + * @clk_stop_timeout: Worst-case latency of the Clock Stop Prepare State + * Machine transitions, in milliseconds + * @ch_prep_timeout: Worst-case latency of the Channel Prepare State Machine + * transitions, in milliseconds + * @reset_behave: Slave keeps the status of the SlaveStopClockPrepare + * state machine (P=1 SCSP_SM) after exit from clock-stop mode1 + * @high_PHY_capable: Slave is HighPHY capable + * @paging_support: Slave implements paging registers SCP_AddrPage1 and + * SCP_AddrPage2 + * @bank_delay_support: Slave implements bank delay/bridge support registers + * SCP_BankDelay and SCP_NextFrame + * @p15_behave: Slave behavior when the Master attempts a read to the Port15 + * alias + * @lane_control_support: Slave supports lane control + * @master_count: Number of Masters present on this Slave + * @source_ports: Bitmap identifying source ports + * @sink_ports: Bitmap identifying sink ports + * @dp0_prop: Data Port 0 properties + * @src_dpn_prop: Source Data Port N properties + * @sink_dpn_prop: Sink Data Port N properties + */ +struct sdw_slave_prop { + u32 mipi_revision; + bool wake_capable; + bool test_mode_capable; + bool clk_stop_mode1; + bool simple_clk_stop_capable; + u32 clk_stop_timeout; + u32 ch_prep_timeout; + enum sdw_clk_stop_reset_behave reset_behave; + bool high_PHY_capable; + bool paging_support; + bool bank_delay_support; + enum sdw_p15_behave p15_behave; + bool lane_control_support; + u32 master_count; + u32 source_ports; + u32 sink_ports; + struct sdw_dp0_prop *dp0_prop; + struct sdw_dpn_prop *src_dpn_prop; + struct sdw_dpn_prop *sink_dpn_prop; +}; + +/** + * struct sdw_master_prop - Master properties + * @revision: MIPI spec version of the implementation + * @master_count: Number of masters + * @clk_stop_mode: Bitmap for Clock Stop modes supported + * @max_freq: Maximum Bus clock frequency, in Hz + * @num_clk_gears: Number of clock gears supported + * @clk_gears: Clock gears supported + * @num_freq: Number of clock frequencies supported, in Hz + * @freq: Clock frequencies supported, in Hz + * @default_frame_rate: Controller default Frame rate, in Hz + * @default_row: Number of rows + * @default_col: Number of columns + * @dynamic_frame: Dynamic frame supported + * @err_threshold: Number of times that software may retry sending a single + * command + * @dpn_prop: Data Port N properties + */ +struct sdw_master_prop { + u32 revision; + u32 master_count; + enum sdw_clk_stop_mode clk_stop_mode; + u32 max_freq; + u32 num_clk_gears; + u32 *clk_gears; + u32 num_freq; + u32 *freq; + u32 default_frame_rate; + u32 default_row; + u32 default_col; + bool dynamic_frame; + u32 err_threshold; + struct sdw_dpn_prop *dpn_prop; +}; + +int sdw_master_read_prop(struct sdw_bus *bus); +int sdw_slave_read_prop(struct sdw_slave *slave); + +/* + * SDW Slave Structures and APIs + */ + +/** + * struct sdw_slave_id - Slave ID + * @mfg_id: MIPI Manufacturer ID + * @part_id: Device Part ID + * @class_id: MIPI Class ID, unused now. + * Currently a placeholder in MIPI SoundWire Spec + * @unique_id: Device unique ID + * @sdw_version: SDW version implemented + * + * The order of the IDs here does not follow the DisCo spec definitions + */ +struct sdw_slave_id { + __u16 mfg_id; + __u16 part_id; + __u8 class_id; + __u8 unique_id:4; + __u8 sdw_version:4; +}; + +/** + * struct sdw_slave_intr_status - Slave interrupt status + * @control_port: control port status + * @port: data port status + */ +struct sdw_slave_intr_status { + u8 control_port; + u8 port[15]; +}; + +/** + * struct sdw_slave_ops - Slave driver callback ops + * @read_prop: Read Slave properties + * @interrupt_callback: Device interrupt notification (invoked in thread + * context) + * @update_status: Update Slave status + */ +struct sdw_slave_ops { + int (*read_prop)(struct sdw_slave *sdw); + int (*interrupt_callback)(struct sdw_slave *slave, + struct sdw_slave_intr_status *status); + int (*update_status)(struct sdw_slave *slave, + enum sdw_slave_status status); +}; + +/** + * struct sdw_slave - SoundWire Slave + * @id: MIPI device ID + * @dev: Linux device + * @status: Status reported by the Slave + * @bus: Bus handle + * @ops: Slave callback ops + * @prop: Slave properties + * @node: node for bus list + * @port_ready: Port ready completion flag for each Slave port + * @dev_num: Device Number assigned by Bus + */ +struct sdw_slave { + struct sdw_slave_id id; + struct device dev; + enum sdw_slave_status status; + struct sdw_bus *bus; + const struct sdw_slave_ops *ops; + struct sdw_slave_prop prop; + struct list_head node; + struct completion *port_ready; + u16 dev_num; +}; + +#define dev_to_sdw_dev(_dev) container_of(_dev, struct sdw_slave, dev) + +struct sdw_driver { + const char *name; + + int (*probe)(struct sdw_slave *sdw, + const struct sdw_device_id *id); + int (*remove)(struct sdw_slave *sdw); + void (*shutdown)(struct sdw_slave *sdw); + + const struct sdw_device_id *id_table; + const struct sdw_slave_ops *ops; + + struct device_driver driver; +}; + +#define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data) \ + { .mfg_id = (_mfg_id), .part_id = (_part_id), \ + .driver_data = (unsigned long)(_drv_data) } + +int sdw_handle_slave_status(struct sdw_bus *bus, + enum sdw_slave_status status[]); + +/* + * SDW master structures and APIs + */ + +struct sdw_msg; + +/** + * struct sdw_defer - SDW deffered message + * @length: message length + * @complete: message completion + * @msg: SDW message + */ +struct sdw_defer { + int length; + struct completion complete; + struct sdw_msg *msg; +}; + +/** + * struct sdw_master_ops - Master driver ops + * @read_prop: Read Master properties + * @xfer_msg: Transfer message callback + * @xfer_msg_defer: Defer version of transfer message callback + * @reset_page_addr: Reset the SCP page address registers + */ +struct sdw_master_ops { + int (*read_prop)(struct sdw_bus *bus); + + enum sdw_command_response (*xfer_msg) + (struct sdw_bus *bus, struct sdw_msg *msg); + enum sdw_command_response (*xfer_msg_defer) + (struct sdw_bus *bus, struct sdw_msg *msg, + struct sdw_defer *defer); + enum sdw_command_response (*reset_page_addr) + (struct sdw_bus *bus, unsigned int dev_num); +}; + +/** + * struct sdw_bus - SoundWire bus + * @dev: Master linux device + * @link_id: Link id number, can be 0 to N, unique for each Master + * @slaves: list of Slaves on this bus + * @assigned: Bitmap for Slave device numbers. + * Bit set implies used number, bit clear implies unused number. + * @bus_lock: bus lock + * @msg_lock: message lock + * @ops: Master callback ops + * @prop: Master properties + * @defer_msg: Defer message + * @clk_stop_timeout: Clock stop timeout computed + */ +struct sdw_bus { + struct device *dev; + unsigned int link_id; + struct list_head slaves; + DECLARE_BITMAP(assigned, SDW_MAX_DEVICES); + struct mutex bus_lock; + struct mutex msg_lock; + const struct sdw_master_ops *ops; + struct sdw_master_prop prop; + struct sdw_defer defer_msg; + unsigned int clk_stop_timeout; +}; + +int sdw_add_bus_master(struct sdw_bus *bus); +void sdw_delete_bus_master(struct sdw_bus *bus); + +/* messaging and data APIs */ + +int sdw_read(struct sdw_slave *slave, u32 addr); +int sdw_write(struct sdw_slave *slave, u32 addr, u8 value); +int sdw_nread(struct sdw_slave *slave, u32 addr, size_t count, u8 *val); +int sdw_nwrite(struct sdw_slave *slave, u32 addr, size_t count, u8 *val); + +#endif /* __SOUNDWIRE_H */ diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h new file mode 100644 index 000000000000..4b37528f592d --- /dev/null +++ b/include/linux/soundwire/sdw_intel.h @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_INTEL_H +#define __SDW_INTEL_H + +/** + * struct sdw_intel_res - Soundwire Intel resource structure + * @mmio_base: mmio base of SoundWire registers + * @irq: interrupt number + * @handle: ACPI parent handle + * @parent: parent device + */ +struct sdw_intel_res { + void __iomem *mmio_base; + int irq; + acpi_handle handle; + struct device *parent; +}; + +void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res); +void sdw_intel_exit(void *arg); + +#endif diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h new file mode 100644 index 000000000000..df472b1ab410 --- /dev/null +++ b/include/linux/soundwire/sdw_registers.h @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SDW_REGISTERS_H +#define __SDW_REGISTERS_H + +/* + * typically we define register and shifts but if one observes carefully, + * the shift can be generated from MASKS using few bit primitaives like ffs + * etc, so we use that and avoid defining shifts + */ +#define SDW_REG_SHIFT(n) (ffs(n) - 1) + +/* + * SDW registers as defined by MIPI 1.1 Spec + */ +#define SDW_REGADDR GENMASK(14, 0) +#define SDW_SCP_ADDRPAGE2_MASK GENMASK(22, 15) +#define SDW_SCP_ADDRPAGE1_MASK GENMASK(30, 23) + +#define SDW_REG_NO_PAGE 0x00008000 +#define SDW_REG_OPTIONAL_PAGE 0x00010000 +#define SDW_REG_MAX 0x80000000 + +#define SDW_DPN_SIZE 0x100 +#define SDW_BANK1_OFFSET 0x10 + +/* + * DP0 Interrupt register & bits + * + * Spec treats Status (RO) and Clear (WC) as separate but they are same + * address, so treat as same register with WC. + */ + +/* both INT and STATUS register are same */ +#define SDW_DP0_INT 0x0 +#define SDW_DP0_INTMASK 0x1 +#define SDW_DP0_PORTCTRL 0x2 +#define SDW_DP0_BLOCKCTRL1 0x3 +#define SDW_DP0_PREPARESTATUS 0x4 +#define SDW_DP0_PREPARECTRL 0x5 + +#define SDW_DP0_INT_TEST_FAIL BIT(0) +#define SDW_DP0_INT_PORT_READY BIT(1) +#define SDW_DP0_INT_BRA_FAILURE BIT(2) +#define SDW_DP0_INT_IMPDEF1 BIT(5) +#define SDW_DP0_INT_IMPDEF2 BIT(6) +#define SDW_DP0_INT_IMPDEF3 BIT(7) + +#define SDW_DP0_PORTCTRL_DATAMODE GENMASK(3, 2) +#define SDW_DP0_PORTCTRL_NXTINVBANK BIT(4) +#define SDW_DP0_PORTCTRL_BPT_PAYLD GENMASK(7, 6) + +#define SDW_DP0_CHANNELEN 0x20 +#define SDW_DP0_SAMPLECTRL1 0x22 +#define SDW_DP0_SAMPLECTRL2 0x23 +#define SDW_DP0_OFFSETCTRL1 0x24 +#define SDW_DP0_OFFSETCTRL2 0x25 +#define SDW_DP0_HCTRL 0x26 +#define SDW_DP0_LANECTRL 0x28 + +/* Both INT and STATUS register are same */ +#define SDW_SCP_INT1 0x40 +#define SDW_SCP_INTMASK1 0x41 + +#define SDW_SCP_INT1_PARITY BIT(0) +#define SDW_SCP_INT1_BUS_CLASH BIT(1) +#define SDW_SCP_INT1_IMPL_DEF BIT(2) +#define SDW_SCP_INT1_SCP2_CASCADE BIT(7) +#define SDW_SCP_INT1_PORT0_3 GENMASK(6, 3) + +#define SDW_SCP_INTSTAT2 0x42 +#define SDW_SCP_INTSTAT2_SCP3_CASCADE BIT(7) +#define SDW_SCP_INTSTAT2_PORT4_10 GENMASK(6, 0) + + +#define SDW_SCP_INTSTAT3 0x43 +#define SDW_SCP_INTSTAT3_PORT11_14 GENMASK(3, 0) + +/* Number of interrupt status registers */ +#define SDW_NUM_INT_STAT_REGISTERS 3 + +/* Number of interrupt clear registers */ +#define SDW_NUM_INT_CLEAR_REGISTERS 1 + +#define SDW_SCP_CTRL 0x44 +#define SDW_SCP_CTRL_CLK_STP_NOW BIT(1) +#define SDW_SCP_CTRL_FORCE_RESET BIT(7) + +#define SDW_SCP_STAT 0x44 +#define SDW_SCP_STAT_CLK_STP_NF BIT(0) +#define SDW_SCP_STAT_HPHY_NOK BIT(5) +#define SDW_SCP_STAT_CURR_BANK BIT(6) + +#define SDW_SCP_SYSTEMCTRL 0x45 +#define SDW_SCP_SYSTEMCTRL_CLK_STP_PREP BIT(0) +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE BIT(2) +#define SDW_SCP_SYSTEMCTRL_WAKE_UP_EN BIT(3) +#define SDW_SCP_SYSTEMCTRL_HIGH_PHY BIT(4) + +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE0 0 +#define SDW_SCP_SYSTEMCTRL_CLK_STP_MODE1 BIT(2) + +#define SDW_SCP_DEVNUMBER 0x46 +#define SDW_SCP_HIGH_PHY_CHECK 0x47 +#define SDW_SCP_ADDRPAGE1 0x48 +#define SDW_SCP_ADDRPAGE2 0x49 +#define SDW_SCP_KEEPEREN 0x4A +#define SDW_SCP_BANKDELAY 0x4B +#define SDW_SCP_TESTMODE 0x4F +#define SDW_SCP_DEVID_0 0x50 +#define SDW_SCP_DEVID_1 0x51 +#define SDW_SCP_DEVID_2 0x52 +#define SDW_SCP_DEVID_3 0x53 +#define SDW_SCP_DEVID_4 0x54 +#define SDW_SCP_DEVID_5 0x55 + +/* Banked Registers */ +#define SDW_SCP_FRAMECTRL_B0 0x60 +#define SDW_SCP_FRAMECTRL_B1 (0x60 + SDW_BANK1_OFFSET) +#define SDW_SCP_NEXTFRAME_B0 0x61 +#define SDW_SCP_NEXTFRAME_B1 (0x61 + SDW_BANK1_OFFSET) + +/* Both INT and STATUS register is same */ +#define SDW_DPN_INT(n) (0x0 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_INTMASK(n) (0x1 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PORTCTRL(n) (0x2 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL1(n) (0x3 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PREPARESTATUS(n) (0x4 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_PREPARECTRL(n) (0x5 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_INT_TEST_FAIL BIT(0) +#define SDW_DPN_INT_PORT_READY BIT(1) +#define SDW_DPN_INT_IMPDEF1 BIT(5) +#define SDW_DPN_INT_IMPDEF2 BIT(6) +#define SDW_DPN_INT_IMPDEF3 BIT(7) + +#define SDW_DPN_PORTCTRL_FLOWMODE GENMASK(1, 0) +#define SDW_DPN_PORTCTRL_DATAMODE GENMASK(3, 2) +#define SDW_DPN_PORTCTRL_NXTINVBANK BIT(4) + +#define SDW_DPN_BLOCKCTRL1_WDLEN GENMASK(5, 0) + +#define SDW_DPN_PREPARECTRL_CH_PREP GENMASK(7, 0) + +#define SDW_DPN_CHANNELEN_B0(n) (0x20 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_CHANNELEN_B1(n) (0x30 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_BLOCKCTRL2_B0(n) (0x21 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL2_B1(n) (0x31 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL1_B0(n) (0x22 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_SAMPLECTRL1_B1(n) (0x32 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL2_B0(n) (0x23 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_SAMPLECTRL2_B1(n) (0x33 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_OFFSETCTRL1_B0(n) (0x24 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_OFFSETCTRL1_B1(n) (0x34 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_OFFSETCTRL2_B0(n) (0x25 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_OFFSETCTRL2_B1(n) (0x35 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_HCTRL_B0(n) (0x26 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_HCTRL_B1(n) (0x36 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_BLOCKCTRL3_B0(n) (0x27 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_BLOCKCTRL3_B1(n) (0x37 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_LANECTRL_B0(n) (0x28 + SDW_DPN_SIZE * (n)) +#define SDW_DPN_LANECTRL_B1(n) (0x38 + SDW_DPN_SIZE * (n)) + +#define SDW_DPN_SAMPLECTRL_LOW GENMASK(7, 0) +#define SDW_DPN_SAMPLECTRL_HIGH GENMASK(15, 8) + +#define SDW_DPN_HCTRL_HSTART GENMASK(7, 4) +#define SDW_DPN_HCTRL_HSTOP GENMASK(3, 0) + +#define SDW_NUM_CASC_PORT_INTSTAT1 4 +#define SDW_CASC_PORT_START_INTSTAT1 0 +#define SDW_CASC_PORT_MASK_INTSTAT1 0x8 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT1 0x0 + +#define SDW_NUM_CASC_PORT_INTSTAT2 7 +#define SDW_CASC_PORT_START_INTSTAT2 4 +#define SDW_CASC_PORT_MASK_INTSTAT2 1 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT2 1 + +#define SDW_NUM_CASC_PORT_INTSTAT3 4 +#define SDW_CASC_PORT_START_INTSTAT3 11 +#define SDW_CASC_PORT_MASK_INTSTAT3 1 +#define SDW_CASC_PORT_REG_OFFSET_INTSTAT3 2 + +#endif /* __SDW_REGISTERS_H */ diff --git a/include/linux/soundwire/sdw_type.h b/include/linux/soundwire/sdw_type.h new file mode 100644 index 000000000000..9fd553e553e9 --- /dev/null +++ b/include/linux/soundwire/sdw_type.h @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright(c) 2015-17 Intel Corporation. + +#ifndef __SOUNDWIRE_TYPES_H +#define __SOUNDWIRE_TYPES_H + +extern struct bus_type sdw_bus_type; + +#define drv_to_sdw_driver(_drv) container_of(_drv, struct sdw_driver, driver) + +#define sdw_register_driver(drv) \ + __sdw_register_driver(drv, THIS_MODULE) + +int __sdw_register_driver(struct sdw_driver *drv, struct module *); +void sdw_unregister_driver(struct sdw_driver *drv); + +int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size); + +#endif /* __SOUNDWIRE_TYPES_H */ diff --git a/include/linux/vbox_utils.h b/include/linux/vbox_utils.h new file mode 100644 index 000000000000..c71def6b310f --- /dev/null +++ b/include/linux/vbox_utils.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* Copyright (C) 2006-2016 Oracle Corporation */ + +#ifndef __VBOX_UTILS_H__ +#define __VBOX_UTILS_H__ + +#include +#include + +struct vbg_dev; + +/** + * vboxguest logging functions, these log both to the backdoor and call + * the equivalent kernel pr_foo function. + */ +__printf(1, 2) void vbg_info(const char *fmt, ...); +__printf(1, 2) void vbg_warn(const char *fmt, ...); +__printf(1, 2) void vbg_err(const char *fmt, ...); + +/* Only use backdoor logging for non-dynamic debug builds */ +#if defined(DEBUG) && !defined(CONFIG_DYNAMIC_DEBUG) +__printf(1, 2) void vbg_debug(const char *fmt, ...); +#else +#define vbg_debug pr_debug +#endif + +/** + * Allocate memory for generic request and initialize the request header. + * + * Return: the allocated memory + * @len: Size of memory block required for the request. + * @req_type: The generic request type. + */ +void *vbg_req_alloc(size_t len, enum vmmdev_request_type req_type); + +/** + * Perform a generic request. + * + * Return: VBox status code + * @gdev: The Guest extension device. + * @req: Pointer to the request structure. + */ +int vbg_req_perform(struct vbg_dev *gdev, void *req); + +int vbg_hgcm_connect(struct vbg_dev *gdev, + struct vmmdev_hgcm_service_location *loc, + u32 *client_id, int *vbox_status); + +int vbg_hgcm_disconnect(struct vbg_dev *gdev, u32 client_id, int *vbox_status); + +int vbg_hgcm_call(struct vbg_dev *gdev, u32 client_id, u32 function, + u32 timeout_ms, struct vmmdev_hgcm_function_parameter *parms, + u32 parm_count, int *vbox_status); + +int vbg_hgcm_call32( + struct vbg_dev *gdev, u32 client_id, u32 function, u32 timeout_ms, + struct vmmdev_hgcm_function_parameter32 *parm32, u32 parm_count, + int *vbox_status); + +/** + * Convert a VirtualBox status code to a standard Linux kernel return value. + * Return: 0 or negative errno value. + * @rc: VirtualBox status code to convert. + */ +int vbg_status_code_to_errno(int rc); + +/** + * Helper for the vboxsf driver to get a reference to the guest device. + * Return: a pointer to the gdev; or a ERR_PTR value on error. + */ +struct vbg_dev *vbg_get_gdev(void); + +/** + * Helper for the vboxsf driver to put a guest device reference. + * @gdev: Reference returned by vbg_get_gdev to put. + */ +void vbg_put_gdev(struct vbg_dev *gdev); + +#endif diff --git a/include/trace/events/siox.h b/include/trace/events/siox.h new file mode 100644 index 000000000000..68a43fc2c3a5 --- /dev/null +++ b/include/trace/events/siox.h @@ -0,0 +1,66 @@ +#undef TRACE_SYSTEM +#define TRACE_SYSTEM siox + +#if !defined(_TRACE_SIOX_H) || defined(TRACE_HEADER_MULTI_READ) +#define _TRACE_SIOX_H + +#include + +TRACE_EVENT(siox_set_data, + TP_PROTO(const struct siox_master *smaster, + const struct siox_device *sdevice, + unsigned int devno, size_t bufoffset), + TP_ARGS(smaster, sdevice, devno, bufoffset), + TP_STRUCT__entry( + __field(int, busno) + __field(unsigned int, devno) + __field(size_t, inbytes) + __dynamic_array(u8, buf, sdevice->inbytes) + ), + TP_fast_assign( + __entry->busno = smaster->busno; + __entry->devno = devno; + __entry->inbytes = sdevice->inbytes; + memcpy(__get_dynamic_array(buf), + smaster->buf + bufoffset, sdevice->inbytes); + ), + TP_printk("siox-%d-%u [%*phD]", + __entry->busno, + __entry->devno, + (int)__entry->inbytes, __get_dynamic_array(buf) + ) +); + +TRACE_EVENT(siox_get_data, + TP_PROTO(const struct siox_master *smaster, + const struct siox_device *sdevice, + unsigned int devno, u8 status_clean, + size_t bufoffset), + TP_ARGS(smaster, sdevice, devno, status_clean, bufoffset), + TP_STRUCT__entry( + __field(int, busno) + __field(unsigned int, devno) + __field(u8, status_clean) + __field(size_t, outbytes) + __dynamic_array(u8, buf, sdevice->outbytes) + ), + TP_fast_assign( + __entry->busno = smaster->busno; + __entry->devno = devno; + __entry->status_clean = status_clean; + __entry->outbytes = sdevice->outbytes; + memcpy(__get_dynamic_array(buf), + smaster->buf + bufoffset, sdevice->outbytes); + ), + TP_printk("siox-%d-%u (%02hhx) [%*phD]", + __entry->busno, + __entry->devno, + __entry->status_clean, + (int)__entry->outbytes, __get_dynamic_array(buf) + ) +); + +#endif /* if !defined(_TRACE_SIOX_H) || defined(TRACE_HEADER_MULTI_READ) */ + +/* This part must be outside protection */ +#include diff --git a/include/uapi/linux/lp.h b/include/uapi/linux/lp.h index dafcfe4e4834..8589a27037d7 100644 --- a/include/uapi/linux/lp.h +++ b/include/uapi/linux/lp.h @@ -8,6 +8,8 @@ #ifndef _UAPI_LINUX_LP_H #define _UAPI_LINUX_LP_H +#include +#include /* * Per POSIX guidelines, this module reserves the LP and lp prefixes @@ -88,7 +90,15 @@ #define LPGETSTATS 0x060d /* get statistics (struct lp_stats) */ #endif #define LPGETFLAGS 0x060e /* get status flags */ -#define LPSETTIMEOUT 0x060f /* set parport timeout */ +#define LPSETTIMEOUT_OLD 0x060f /* set parport timeout */ +#define LPSETTIMEOUT_NEW \ + _IOW(0x6, 0xf, __s64[2]) /* set parport timeout */ +#if __BITS_PER_LONG == 64 +#define LPSETTIMEOUT LPSETTIMEOUT_OLD +#else +#define LPSETTIMEOUT (sizeof(time_t) > sizeof(__kernel_long_t) ? \ + LPSETTIMEOUT_NEW : LPSETTIMEOUT_OLD) +#endif /* timeout for printk'ing a timeout, in jiffies (100ths of a second). This is also used for re-checking error conditions if LP_ABORT is diff --git a/include/uapi/linux/vbox_err.h b/include/uapi/linux/vbox_err.h new file mode 100644 index 000000000000..7eae536ff1e6 --- /dev/null +++ b/include/uapi/linux/vbox_err.h @@ -0,0 +1,151 @@ +/* SPDX-License-Identifier: MIT */ +/* Copyright (C) 2017 Oracle Corporation */ + +#ifndef __UAPI_VBOX_ERR_H__ +#define __UAPI_VBOX_ERR_H__ + +#define VINF_SUCCESS 0 +#define VERR_GENERAL_FAILURE (-1) +#define VERR_INVALID_PARAMETER (-2) +#define VERR_INVALID_MAGIC (-3) +#define VERR_INVALID_HANDLE (-4) +#define VERR_LOCK_FAILED (-5) +#define VERR_INVALID_POINTER (-6) +#define VERR_IDT_FAILED (-7) +#define VERR_NO_MEMORY (-8) +#define VERR_ALREADY_LOADED (-9) +#define VERR_PERMISSION_DENIED (-10) +#define VERR_VERSION_MISMATCH (-11) +#define VERR_NOT_IMPLEMENTED (-12) +#define VERR_INVALID_FLAGS (-13) + +#define VERR_NOT_EQUAL (-18) +#define VERR_NOT_SYMLINK (-19) +#define VERR_NO_TMP_MEMORY (-20) +#define VERR_INVALID_FMODE (-21) +#define VERR_WRONG_ORDER (-22) +#define VERR_NO_TLS_FOR_SELF (-23) +#define VERR_FAILED_TO_SET_SELF_TLS (-24) +#define VERR_NO_CONT_MEMORY (-26) +#define VERR_NO_PAGE_MEMORY (-27) +#define VERR_THREAD_IS_DEAD (-29) +#define VERR_THREAD_NOT_WAITABLE (-30) +#define VERR_PAGE_TABLE_NOT_PRESENT (-31) +#define VERR_INVALID_CONTEXT (-32) +#define VERR_TIMER_BUSY (-33) +#define VERR_ADDRESS_CONFLICT (-34) +#define VERR_UNRESOLVED_ERROR (-35) +#define VERR_INVALID_FUNCTION (-36) +#define VERR_NOT_SUPPORTED (-37) +#define VERR_ACCESS_DENIED (-38) +#define VERR_INTERRUPTED (-39) +#define VERR_TIMEOUT (-40) +#define VERR_BUFFER_OVERFLOW (-41) +#define VERR_TOO_MUCH_DATA (-42) +#define VERR_MAX_THRDS_REACHED (-43) +#define VERR_MAX_PROCS_REACHED (-44) +#define VERR_SIGNAL_REFUSED (-45) +#define VERR_SIGNAL_PENDING (-46) +#define VERR_SIGNAL_INVALID (-47) +#define VERR_STATE_CHANGED (-48) +#define VERR_INVALID_UUID_FORMAT (-49) +#define VERR_PROCESS_NOT_FOUND (-50) +#define VERR_PROCESS_RUNNING (-51) +#define VERR_TRY_AGAIN (-52) +#define VERR_PARSE_ERROR (-53) +#define VERR_OUT_OF_RANGE (-54) +#define VERR_NUMBER_TOO_BIG (-55) +#define VERR_NO_DIGITS (-56) +#define VERR_NEGATIVE_UNSIGNED (-57) +#define VERR_NO_TRANSLATION (-58) + +#define VERR_NOT_FOUND (-78) +#define VERR_INVALID_STATE (-79) +#define VERR_OUT_OF_RESOURCES (-80) + +#define VERR_FILE_NOT_FOUND (-102) +#define VERR_PATH_NOT_FOUND (-103) +#define VERR_INVALID_NAME (-104) +#define VERR_ALREADY_EXISTS (-105) +#define VERR_TOO_MANY_OPEN_FILES (-106) +#define VERR_SEEK (-107) +#define VERR_NEGATIVE_SEEK (-108) +#define VERR_SEEK_ON_DEVICE (-109) +#define VERR_EOF (-110) +#define VERR_READ_ERROR (-111) +#define VERR_WRITE_ERROR (-112) +#define VERR_WRITE_PROTECT (-113) +#define VERR_SHARING_VIOLATION (-114) +#define VERR_FILE_LOCK_FAILED (-115) +#define VERR_FILE_LOCK_VIOLATION (-116) +#define VERR_CANT_CREATE (-117) +#define VERR_CANT_DELETE_DIRECTORY (-118) +#define VERR_NOT_SAME_DEVICE (-119) +#define VERR_FILENAME_TOO_LONG (-120) +#define VERR_MEDIA_NOT_PRESENT (-121) +#define VERR_MEDIA_NOT_RECOGNIZED (-122) +#define VERR_FILE_NOT_LOCKED (-123) +#define VERR_FILE_LOCK_LOST (-124) +#define VERR_DIR_NOT_EMPTY (-125) +#define VERR_NOT_A_DIRECTORY (-126) +#define VERR_IS_A_DIRECTORY (-127) +#define VERR_FILE_TOO_BIG (-128) + +#define VERR_NET_IO_ERROR (-400) +#define VERR_NET_OUT_OF_RESOURCES (-401) +#define VERR_NET_HOST_NOT_FOUND (-402) +#define VERR_NET_PATH_NOT_FOUND (-403) +#define VERR_NET_PRINT_ERROR (-404) +#define VERR_NET_NO_NETWORK (-405) +#define VERR_NET_NOT_UNIQUE_NAME (-406) + +#define VERR_NET_IN_PROGRESS (-436) +#define VERR_NET_ALREADY_IN_PROGRESS (-437) +#define VERR_NET_NOT_SOCKET (-438) +#define VERR_NET_DEST_ADDRESS_REQUIRED (-439) +#define VERR_NET_MSG_SIZE (-440) +#define VERR_NET_PROTOCOL_TYPE (-441) +#define VERR_NET_PROTOCOL_NOT_AVAILABLE (-442) +#define VERR_NET_PROTOCOL_NOT_SUPPORTED (-443) +#define VERR_NET_SOCKET_TYPE_NOT_SUPPORTED (-444) +#define VERR_NET_OPERATION_NOT_SUPPORTED (-445) +#define VERR_NET_PROTOCOL_FAMILY_NOT_SUPPORTED (-446) +#define VERR_NET_ADDRESS_FAMILY_NOT_SUPPORTED (-447) +#define VERR_NET_ADDRESS_IN_USE (-448) +#define VERR_NET_ADDRESS_NOT_AVAILABLE (-449) +#define VERR_NET_DOWN (-450) +#define VERR_NET_UNREACHABLE (-451) +#define VERR_NET_CONNECTION_RESET (-452) +#define VERR_NET_CONNECTION_ABORTED (-453) +#define VERR_NET_CONNECTION_RESET_BY_PEER (-454) +#define VERR_NET_NO_BUFFER_SPACE (-455) +#define VERR_NET_ALREADY_CONNECTED (-456) +#define VERR_NET_NOT_CONNECTED (-457) +#define VERR_NET_SHUTDOWN (-458) +#define VERR_NET_TOO_MANY_REFERENCES (-459) +#define VERR_NET_CONNECTION_TIMED_OUT (-460) +#define VERR_NET_CONNECTION_REFUSED (-461) +#define VERR_NET_HOST_DOWN (-464) +#define VERR_NET_HOST_UNREACHABLE (-465) +#define VERR_NET_PROTOCOL_ERROR (-466) +#define VERR_NET_INCOMPLETE_TX_PACKET (-467) + +/* misc. unsorted codes */ +#define VERR_RESOURCE_BUSY (-138) +#define VERR_DISK_FULL (-152) +#define VERR_TOO_MANY_SYMLINKS (-156) +#define VERR_NO_MORE_FILES (-201) +#define VERR_INTERNAL_ERROR (-225) +#define VERR_INTERNAL_ERROR_2 (-226) +#define VERR_INTERNAL_ERROR_3 (-227) +#define VERR_INTERNAL_ERROR_4 (-228) +#define VERR_DEV_IO_ERROR (-250) +#define VERR_IO_BAD_LENGTH (-255) +#define VERR_BROKEN_PIPE (-301) +#define VERR_NO_DATA (-304) +#define VERR_SEM_DESTROYED (-363) +#define VERR_DEADLOCK (-365) +#define VERR_BAD_EXE_FORMAT (-608) +#define VINF_HGCM_ASYNC_EXECUTE (2903) + +#endif diff --git a/include/uapi/linux/vbox_vmmdev_types.h b/include/uapi/linux/vbox_vmmdev_types.h new file mode 100644 index 000000000000..0e68024f36c7 --- /dev/null +++ b/include/uapi/linux/vbox_vmmdev_types.h @@ -0,0 +1,226 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * Virtual Device for Guest <-> VMM/Host communication, type definitions + * which are also used for the vboxguest ioctl interface / by vboxsf + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#ifndef __UAPI_VBOX_VMMDEV_TYPES_H__ +#define __UAPI_VBOX_VMMDEV_TYPES_H__ + +#include +#include + +/* + * We cannot use linux' compiletime_assert here because it expects to be used + * inside a function only. Use a typedef to a char array with a negative size. + */ +#define VMMDEV_ASSERT_SIZE(type, size) \ + typedef char type ## _asrt_size[1 - 2*!!(sizeof(struct type) != (size))] + +/** enum vmmdev_request_type - VMMDev request types. */ +enum vmmdev_request_type { + VMMDEVREQ_INVALID_REQUEST = 0, + VMMDEVREQ_GET_MOUSE_STATUS = 1, + VMMDEVREQ_SET_MOUSE_STATUS = 2, + VMMDEVREQ_SET_POINTER_SHAPE = 3, + VMMDEVREQ_GET_HOST_VERSION = 4, + VMMDEVREQ_IDLE = 5, + VMMDEVREQ_GET_HOST_TIME = 10, + VMMDEVREQ_GET_HYPERVISOR_INFO = 20, + VMMDEVREQ_SET_HYPERVISOR_INFO = 21, + VMMDEVREQ_REGISTER_PATCH_MEMORY = 22, /* since version 3.0.6 */ + VMMDEVREQ_DEREGISTER_PATCH_MEMORY = 23, /* since version 3.0.6 */ + VMMDEVREQ_SET_POWER_STATUS = 30, + VMMDEVREQ_ACKNOWLEDGE_EVENTS = 41, + VMMDEVREQ_CTL_GUEST_FILTER_MASK = 42, + VMMDEVREQ_REPORT_GUEST_INFO = 50, + VMMDEVREQ_REPORT_GUEST_INFO2 = 58, /* since version 3.2.0 */ + VMMDEVREQ_REPORT_GUEST_STATUS = 59, /* since version 3.2.8 */ + VMMDEVREQ_REPORT_GUEST_USER_STATE = 74, /* since version 4.3 */ + /* Retrieve a display resize request sent by the host, deprecated. */ + VMMDEVREQ_GET_DISPLAY_CHANGE_REQ = 51, + VMMDEVREQ_VIDEMODE_SUPPORTED = 52, + VMMDEVREQ_GET_HEIGHT_REDUCTION = 53, + /** + * @VMMDEVREQ_GET_DISPLAY_CHANGE_REQ2: + * Retrieve a display resize request sent by the host. + * + * Queries a display resize request sent from the host. If the + * event_ack member is sent to true and there is an unqueried request + * available for one of the virtual display then that request will + * be returned. If several displays have unqueried requests the lowest + * numbered display will be chosen first. Only the most recent unseen + * request for each display is remembered. + * If event_ack is set to false, the last host request queried with + * event_ack set is resent, or failing that the most recent received + * from the host. If no host request was ever received then all zeros + * are returned. + */ + VMMDEVREQ_GET_DISPLAY_CHANGE_REQ2 = 54, + VMMDEVREQ_REPORT_GUEST_CAPABILITIES = 55, + VMMDEVREQ_SET_GUEST_CAPABILITIES = 56, + VMMDEVREQ_VIDEMODE_SUPPORTED2 = 57, /* since version 3.2.0 */ + VMMDEVREQ_GET_DISPLAY_CHANGE_REQEX = 80, /* since version 4.2.4 */ + VMMDEVREQ_HGCM_CONNECT = 60, + VMMDEVREQ_HGCM_DISCONNECT = 61, + VMMDEVREQ_HGCM_CALL32 = 62, + VMMDEVREQ_HGCM_CALL64 = 63, + VMMDEVREQ_HGCM_CANCEL = 64, + VMMDEVREQ_HGCM_CANCEL2 = 65, + VMMDEVREQ_VIDEO_ACCEL_ENABLE = 70, + VMMDEVREQ_VIDEO_ACCEL_FLUSH = 71, + VMMDEVREQ_VIDEO_SET_VISIBLE_REGION = 72, + VMMDEVREQ_GET_SEAMLESS_CHANGE_REQ = 73, + VMMDEVREQ_QUERY_CREDENTIALS = 100, + VMMDEVREQ_REPORT_CREDENTIALS_JUDGEMENT = 101, + VMMDEVREQ_REPORT_GUEST_STATS = 110, + VMMDEVREQ_GET_MEMBALLOON_CHANGE_REQ = 111, + VMMDEVREQ_GET_STATISTICS_CHANGE_REQ = 112, + VMMDEVREQ_CHANGE_MEMBALLOON = 113, + VMMDEVREQ_GET_VRDPCHANGE_REQ = 150, + VMMDEVREQ_LOG_STRING = 200, + VMMDEVREQ_GET_CPU_HOTPLUG_REQ = 210, + VMMDEVREQ_SET_CPU_HOTPLUG_STATUS = 211, + VMMDEVREQ_REGISTER_SHARED_MODULE = 212, + VMMDEVREQ_UNREGISTER_SHARED_MODULE = 213, + VMMDEVREQ_CHECK_SHARED_MODULES = 214, + VMMDEVREQ_GET_PAGE_SHARING_STATUS = 215, + VMMDEVREQ_DEBUG_IS_PAGE_SHARED = 216, + VMMDEVREQ_GET_SESSION_ID = 217, /* since version 3.2.8 */ + VMMDEVREQ_WRITE_COREDUMP = 218, + VMMDEVREQ_GUEST_HEARTBEAT = 219, + VMMDEVREQ_HEARTBEAT_CONFIGURE = 220, + /* Ensure the enum is a 32 bit data-type */ + VMMDEVREQ_SIZEHACK = 0x7fffffff +}; + +#if __BITS_PER_LONG == 64 +#define VMMDEVREQ_HGCM_CALL VMMDEVREQ_HGCM_CALL64 +#else +#define VMMDEVREQ_HGCM_CALL VMMDEVREQ_HGCM_CALL32 +#endif + +/** HGCM service location types. */ +enum vmmdev_hgcm_service_location_type { + VMMDEV_HGCM_LOC_INVALID = 0, + VMMDEV_HGCM_LOC_LOCALHOST = 1, + VMMDEV_HGCM_LOC_LOCALHOST_EXISTING = 2, + /* Ensure the enum is a 32 bit data-type */ + VMMDEV_HGCM_LOC_SIZEHACK = 0x7fffffff +}; + +/** HGCM host service location. */ +struct vmmdev_hgcm_service_location_localhost { + /** Service name */ + char service_name[128]; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_service_location_localhost, 128); + +/** HGCM service location. */ +struct vmmdev_hgcm_service_location { + /** Type of the location. */ + enum vmmdev_hgcm_service_location_type type; + + union { + struct vmmdev_hgcm_service_location_localhost localhost; + } u; +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_service_location, 128 + 4); + +/** HGCM function parameter type. */ +enum vmmdev_hgcm_function_parameter_type { + VMMDEV_HGCM_PARM_TYPE_INVALID = 0, + VMMDEV_HGCM_PARM_TYPE_32BIT = 1, + VMMDEV_HGCM_PARM_TYPE_64BIT = 2, + /** Deprecated Doesn't work, use PAGELIST. */ + VMMDEV_HGCM_PARM_TYPE_PHYSADDR = 3, + /** In and Out, user-memory */ + VMMDEV_HGCM_PARM_TYPE_LINADDR = 4, + /** In, user-memory (read; host<-guest) */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_IN = 5, + /** Out, user-memory (write; host->guest) */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_OUT = 6, + /** In and Out, kernel-memory */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL = 7, + /** In, kernel-memory (read; host<-guest) */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_IN = 8, + /** Out, kernel-memory (write; host->guest) */ + VMMDEV_HGCM_PARM_TYPE_LINADDR_KERNEL_OUT = 9, + /** Physical addresses of locked pages for a buffer. */ + VMMDEV_HGCM_PARM_TYPE_PAGELIST = 10, + /* Ensure the enum is a 32 bit data-type */ + VMMDEV_HGCM_PARM_TYPE_SIZEHACK = 0x7fffffff +}; + +/** HGCM function parameter, 32-bit client. */ +struct vmmdev_hgcm_function_parameter32 { + enum vmmdev_hgcm_function_parameter_type type; + union { + __u32 value32; + __u64 value64; + struct { + __u32 size; + union { + __u32 phys_addr; + __u32 linear_addr; + } u; + } pointer; + struct { + /** Size of the buffer described by the page list. */ + __u32 size; + /** Relative to the request header. */ + __u32 offset; + } page_list; + } u; +} __packed; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_function_parameter32, 4 + 8); + +/** HGCM function parameter, 64-bit client. */ +struct vmmdev_hgcm_function_parameter64 { + enum vmmdev_hgcm_function_parameter_type type; + union { + __u32 value32; + __u64 value64; + struct { + __u32 size; + union { + __u64 phys_addr; + __u64 linear_addr; + } u; + } __packed pointer; + struct { + /** Size of the buffer described by the page list. */ + __u32 size; + /** Relative to the request header. */ + __u32 offset; + } page_list; + } __packed u; +} __packed; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_function_parameter64, 4 + 12); + +#if __BITS_PER_LONG == 64 +#define vmmdev_hgcm_function_parameter vmmdev_hgcm_function_parameter64 +#else +#define vmmdev_hgcm_function_parameter vmmdev_hgcm_function_parameter32 +#endif + +#define VMMDEV_HGCM_F_PARM_DIRECTION_NONE 0x00000000U +#define VMMDEV_HGCM_F_PARM_DIRECTION_TO_HOST 0x00000001U +#define VMMDEV_HGCM_F_PARM_DIRECTION_FROM_HOST 0x00000002U +#define VMMDEV_HGCM_F_PARM_DIRECTION_BOTH 0x00000003U + +/** + * struct vmmdev_hgcm_pagelist - VMMDEV_HGCM_PARM_TYPE_PAGELIST parameters + * point to this structure to actually describe the buffer. + */ +struct vmmdev_hgcm_pagelist { + __u32 flags; /** VMMDEV_HGCM_F_PARM_*. */ + __u16 offset_first_page; /** Data offset in the first page. */ + __u16 page_count; /** Number of pages. */ + __u64 pages[1]; /** Page addresses. */ +}; +VMMDEV_ASSERT_SIZE(vmmdev_hgcm_pagelist, 4 + 2 + 2 + 8); + +#endif diff --git a/include/uapi/linux/vboxguest.h b/include/uapi/linux/vboxguest.h new file mode 100644 index 000000000000..612f0c7d3558 --- /dev/null +++ b/include/uapi/linux/vboxguest.h @@ -0,0 +1,330 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR CDDL-1.0) */ +/* + * VBoxGuest - VirtualBox Guest Additions Driver Interface. + * + * Copyright (C) 2006-2016 Oracle Corporation + */ + +#ifndef __UAPI_VBOXGUEST_H__ +#define __UAPI_VBOXGUEST_H__ + +#include +#include +#include +#include + +/* Version of vbg_ioctl_hdr structure. */ +#define VBG_IOCTL_HDR_VERSION 0x10001 +/* Default request type. Use this for non-VMMDev requests. */ +#define VBG_IOCTL_HDR_TYPE_DEFAULT 0 + +/** + * Common ioctl header. + * + * This is a mirror of vmmdev_request_header to prevent duplicating data and + * needing to verify things multiple times. + */ +struct vbg_ioctl_hdr { + /** IN: The request input size, and output size if size_out is zero. */ + __u32 size_in; + /** IN: Structure version (VBG_IOCTL_HDR_VERSION) */ + __u32 version; + /** IN: The VMMDev request type or VBG_IOCTL_HDR_TYPE_DEFAULT. */ + __u32 type; + /** + * OUT: The VBox status code of the operation, out direction only. + * This is a VINF_ or VERR_ value as defined in vbox_err.h. + */ + __s32 rc; + /** IN: Output size. Set to zero to use size_in as output size. */ + __u32 size_out; + /** Reserved, MBZ. */ + __u32 reserved; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_hdr, 24); + + +/* + * The VBoxGuest I/O control version. + * + * As usual, the high word contains the major version and changes to it + * signifies incompatible changes. + * + * The lower word is the minor version number, it is increased when new + * functions are added or existing changed in a backwards compatible manner. + */ +#define VBG_IOC_VERSION 0x00010000u + +/** + * VBG_IOCTL_DRIVER_VERSION_INFO data structure + * + * Note VBG_IOCTL_DRIVER_VERSION_INFO may switch the session to a backwards + * compatible interface version if uClientVersion indicates older client code. + */ +struct vbg_ioctl_driver_version_info { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** Requested interface version (VBG_IOC_VERSION). */ + __u32 req_version; + /** + * Minimum interface version number (typically the + * major version part of VBG_IOC_VERSION). + */ + __u32 min_version; + /** Reserved, MBZ. */ + __u32 reserved1; + /** Reserved, MBZ. */ + __u32 reserved2; + } in; + struct { + /** Version for this session (typ. VBG_IOC_VERSION). */ + __u32 session_version; + /** Version of the IDC interface (VBG_IOC_VERSION). */ + __u32 driver_version; + /** The SVN revision of the driver, or 0. */ + __u32 driver_revision; + /** Reserved \#1 (zero until defined). */ + __u32 reserved1; + /** Reserved \#2 (zero until defined). */ + __u32 reserved2; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_driver_version_info, 24 + 20); + +#define VBG_IOCTL_DRIVER_VERSION_INFO \ + _IOWR('V', 0, struct vbg_ioctl_driver_version_info) + + +/* IOCTL to perform a VMM Device request less than 1KB in size. */ +#define VBG_IOCTL_VMMDEV_REQUEST(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 2, s) + + +/* IOCTL to perform a VMM Device request larger then 1KB. */ +#define VBG_IOCTL_VMMDEV_REQUEST_BIG _IOC(_IOC_READ | _IOC_WRITE, 'V', 3, 0) + + +/** VBG_IOCTL_HGCM_CONNECT data structure. */ +struct vbg_ioctl_hgcm_connect { + struct vbg_ioctl_hdr hdr; + union { + struct { + struct vmmdev_hgcm_service_location loc; + } in; + struct { + __u32 client_id; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_connect, 24 + 132); + +#define VBG_IOCTL_HGCM_CONNECT \ + _IOWR('V', 4, struct vbg_ioctl_hgcm_connect) + + +/** VBG_IOCTL_HGCM_DISCONNECT data structure. */ +struct vbg_ioctl_hgcm_disconnect { + struct vbg_ioctl_hdr hdr; + union { + struct { + __u32 client_id; + } in; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_disconnect, 24 + 4); + +#define VBG_IOCTL_HGCM_DISCONNECT \ + _IOWR('V', 5, struct vbg_ioctl_hgcm_disconnect) + + +/** VBG_IOCTL_HGCM_CALL data structure. */ +struct vbg_ioctl_hgcm_call { + /** The header. */ + struct vbg_ioctl_hdr hdr; + /** Input: The id of the caller. */ + __u32 client_id; + /** Input: Function number. */ + __u32 function; + /** + * Input: How long to wait (milliseconds) for completion before + * cancelling the call. Set to -1 to wait indefinitely. + */ + __u32 timeout_ms; + /** Interruptable flag, ignored for userspace calls. */ + __u8 interruptible; + /** Explicit padding, MBZ. */ + __u8 reserved; + /** + * Input: How many parameters following this structure. + * + * The parameters are either HGCMFunctionParameter64 or 32, + * depending on whether we're receiving a 64-bit or 32-bit request. + * + * The current maximum is 61 parameters (given a 1KB max request size, + * and a 64-bit parameter size of 16 bytes). + */ + __u16 parm_count; + /* + * Parameters follow in form: + * struct hgcm_function_parameter<32|64> parms[parm_count] + */ +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_hgcm_call, 24 + 16); + +#define VBG_IOCTL_HGCM_CALL_32(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 6, s) +#define VBG_IOCTL_HGCM_CALL_64(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 7, s) +#if __BITS_PER_LONG == 64 +#define VBG_IOCTL_HGCM_CALL(s) VBG_IOCTL_HGCM_CALL_64(s) +#else +#define VBG_IOCTL_HGCM_CALL(s) VBG_IOCTL_HGCM_CALL_32(s) +#endif + + +/** VBG_IOCTL_LOG data structure. */ +struct vbg_ioctl_log { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** + * The log message, this may be zero terminated. If it + * is not zero terminated then the length is determined + * from the input size. + */ + char msg[1]; + } in; + } u; +}; + +#define VBG_IOCTL_LOG(s) _IOC(_IOC_READ | _IOC_WRITE, 'V', 9, s) + + +/** VBG_IOCTL_WAIT_FOR_EVENTS data structure. */ +struct vbg_ioctl_wait_for_events { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** Timeout in milliseconds. */ + __u32 timeout_ms; + /** Events to wait for. */ + __u32 events; + } in; + struct { + /** Events that occurred. */ + __u32 events; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_wait_for_events, 24 + 8); + +#define VBG_IOCTL_WAIT_FOR_EVENTS \ + _IOWR('V', 10, struct vbg_ioctl_wait_for_events) + + +/* + * IOCTL to VBoxGuest to interrupt (cancel) any pending + * VBG_IOCTL_WAIT_FOR_EVENTS and return. + * + * Handled inside the vboxguest driver and not seen by the host at all. + * After calling this, VBG_IOCTL_WAIT_FOR_EVENTS should no longer be called in + * the same session. Any VBOXGUEST_IOCTL_WAITEVENT calls in the same session + * done after calling this will directly exit with -EINTR. + */ +#define VBG_IOCTL_INTERRUPT_ALL_WAIT_FOR_EVENTS \ + _IOWR('V', 11, struct vbg_ioctl_hdr) + + +/** VBG_IOCTL_CHANGE_FILTER_MASK data structure. */ +struct vbg_ioctl_change_filter { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** Flags to set. */ + __u32 or_mask; + /** Flags to remove. */ + __u32 not_mask; + } in; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_change_filter, 24 + 8); + +/* IOCTL to VBoxGuest to control the event filter mask. */ +#define VBG_IOCTL_CHANGE_FILTER_MASK \ + _IOWR('V', 12, struct vbg_ioctl_change_filter) + + +/** VBG_IOCTL_CHANGE_GUEST_CAPABILITIES data structure. */ +struct vbg_ioctl_set_guest_caps { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** Capabilities to set (VMMDEV_GUEST_SUPPORTS_XXX). */ + __u32 or_mask; + /** Capabilities to drop (VMMDEV_GUEST_SUPPORTS_XXX). */ + __u32 not_mask; + } in; + struct { + /** Capabilities held by the session after the call. */ + __u32 session_caps; + /** Capabilities for all the sessions after the call. */ + __u32 global_caps; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_set_guest_caps, 24 + 8); + +#define VBG_IOCTL_CHANGE_GUEST_CAPABILITIES \ + _IOWR('V', 14, struct vbg_ioctl_set_guest_caps) + + +/** VBG_IOCTL_CHECK_BALLOON data structure. */ +struct vbg_ioctl_check_balloon { + /** The header. */ + struct vbg_ioctl_hdr hdr; + union { + struct { + /** The size of the balloon in chunks of 1MB. */ + __u32 balloon_chunks; + /** + * false = handled in R0, no further action required. + * true = allocate balloon memory in R3. + */ + __u8 handle_in_r3; + /** Explicit padding, MBZ. */ + __u8 padding[3]; + } out; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_check_balloon, 24 + 8); + +/* + * IOCTL to check memory ballooning. + * + * The guest kernel module will ask the host for the current size of the + * balloon and adjust the size. Or it will set handle_in_r3 = true and R3 is + * responsible for allocating memory and calling VBG_IOCTL_CHANGE_BALLOON. + */ +#define VBG_IOCTL_CHECK_BALLOON \ + _IOWR('V', 17, struct vbg_ioctl_check_balloon) + + +/** VBG_IOCTL_WRITE_CORE_DUMP data structure. */ +struct vbg_ioctl_write_coredump { + struct vbg_ioctl_hdr hdr; + union { + struct { + __u32 flags; /** Flags (reserved, MBZ). */ + } in; + } u; +}; +VMMDEV_ASSERT_SIZE(vbg_ioctl_write_coredump, 24 + 4); + +#define VBG_IOCTL_WRITE_CORE_DUMP \ + _IOWR('V', 19, struct vbg_ioctl_write_coredump) + +#endif diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c index 9826b9a6543c..9fad6afe4c41 100644 --- a/scripts/mod/devicetable-offsets.c +++ b/scripts/mod/devicetable-offsets.c @@ -203,6 +203,10 @@ int main(void) DEVID_FIELD(hda_device_id, rev_id); DEVID_FIELD(hda_device_id, api_version); + DEVID(sdw_device_id); + DEVID_FIELD(sdw_device_id, mfg_id); + DEVID_FIELD(sdw_device_id, part_id); + DEVID(fsl_mc_device_id); DEVID_FIELD(fsl_mc_device_id, vendor); DEVID_FIELD(fsl_mc_device_id, obj_type); diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 6ef6e63f96fd..b9beeaa4695b 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -1289,6 +1289,21 @@ static int do_hda_entry(const char *filename, void *symval, char *alias) } ADD_TO_DEVTABLE("hdaudio", hda_device_id, do_hda_entry); +/* Looks like: sdw:mNpN */ +static int do_sdw_entry(const char *filename, void *symval, char *alias) +{ + DEF_FIELD(symval, sdw_device_id, mfg_id); + DEF_FIELD(symval, sdw_device_id, part_id); + + strcpy(alias, "sdw:"); + ADD(alias, "m", mfg_id != 0, mfg_id); + ADD(alias, "p", part_id != 0, part_id); + + add_wildcard(alias); + return 1; +} +ADD_TO_DEVTABLE("sdw", sdw_device_id, do_sdw_entry); + /* Looks like: fsl-mc:vNdN */ static int do_fsl_mc_entry(const char *filename, void *symval, char *alias) diff --git a/security/Kconfig b/security/Kconfig index b0cb9a5f9448..3709db95027f 100644 --- a/security/Kconfig +++ b/security/Kconfig @@ -154,6 +154,7 @@ config HARDENED_USERCOPY bool "Harden memory copies between kernel and userspace" depends on HAVE_HARDENED_USERCOPY_ALLOCATOR select BUG + imply STRICT_DEVMEM help This option checks for obviously wrong memory regions when copying memory to/from the kernel (via copy_to_user() and diff --git a/tools/hv/Makefile b/tools/hv/Makefile index 31503819454d..1139d71fa0cf 100644 --- a/tools/hv/Makefile +++ b/tools/hv/Makefile @@ -7,9 +7,30 @@ CFLAGS = $(WARNINGS) -g $(shell getconf LFS_CFLAGS) CFLAGS += -D__EXPORTED_HEADERS__ -I../../include/uapi -I../../include -all: hv_kvp_daemon hv_vss_daemon hv_fcopy_daemon +sbindir ?= /usr/sbin +libexecdir ?= /usr/libexec +sharedstatedir ?= /var/lib + +ALL_PROGRAMS := hv_kvp_daemon hv_vss_daemon hv_fcopy_daemon + +ALL_SCRIPTS := hv_get_dhcp_info.sh hv_get_dns_info.sh hv_set_ifconfig.sh + +all: $(ALL_PROGRAMS) + %: %.c $(CC) $(CFLAGS) -o $@ $^ clean: $(RM) hv_kvp_daemon hv_vss_daemon hv_fcopy_daemon + +install: all + install -d -m 755 $(DESTDIR)$(sbindir); \ + install -d -m 755 $(DESTDIR)$(libexecdir)/hypervkvpd; \ + install -d -m 755 $(DESTDIR)$(sharedstatedir); \ + for program in $(ALL_PROGRAMS); do \ + install $$program -m 755 $(DESTDIR)$(sbindir); \ + done; \ + install -m 755 lsvmbus $(DESTDIR)$(sbindir); \ + for script in $(ALL_SCRIPTS); do \ + install $$script -m 755 $(DESTDIR)$(libexecdir)/hypervkvpd/$${script%.sh}; \ + done