davinci: DM644x: add support for SFFSDR board

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>

arch/arm/mach-davinci/Kconfig

@@ -20,6 +20,13 @@ config MACH_DAVINCI_EVM
 	  Configure this option to specify the whether the board used
 	  for development is a DM644x EVM
 
+config MACH_SFFSDR
+	bool "Lyrtech SFFSDR"
+	default n
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Say Y here to select the Lyrtech Small Form Factor
+	  Software Defined Radio (SFFSDR) board.
 
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"

arch/arm/mach-davinci/Makefile

@@ -15,3 +15,4 @@ obj-$(CONFIG_ARCH_DAVINCI_DM644x)       += dm644x.o
 
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o

arch/arm/mach-davinci/board-sffsdr.c

@@ -0,0 +1,180 @@
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE   0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE  0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+	/* U-Boot Environment: Block 0
+	 * UBL:                Block 1
+	 * U-Boot:             Blocks 6-7 (256 kb)
+	 * Integrity Kernel:   Blocks 8-31 (3 Mb)
+	 * Integrity Data:     Blocks 100-END
+	 */
+	{
+		.name		= "Linux Kernel",
+		.offset		= 32 * SZ_128K,
+		.size		= 16 * SZ_128K, /* 2 Mb */
+		.mask_flags	= MTD_WRITEABLE, /* Force read-only */
+	},
+	{
+		.name		= "Linux ROOT",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 256 * SZ_128K, /* 32 Mb */
+		.mask_flags	= 0, /* R/W */
+	},
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+	.parts		= davinci_sffsdr_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+	.name		= "davinci_nand", /* Name of driver */
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_sffsdr_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+	.resource	= davinci_sffsdr_nandflash_resource,
+};
+
+/* Get Ethernet address from kernel boot params */
+static u8 mac_addr[6] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF};
+
+static struct at24_platform_data eeprom_info = {
+	.byte_len	= (64*1024) / 8,
+	.page_size	= 32,
+	.flags		= AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] =  {
+	{
+		I2C_BOARD_INFO("24lc64", 0x50),
+		.platform_data	= &eeprom_info,
+	},
+	/* Other I2C devices:
+	 * MSP430,  addr 0x23 (not used)
+	 * PCA9543, addr 0x70 (setup done by U-Boot)
+	 * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+	 */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+	davinci_init_i2c(&i2c_pdata);
+	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+	&davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+	davinci_map_common_io();
+	dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+	platform_add_devices(davinci_sffsdr_devices,
+			     ARRAY_SIZE(davinci_sffsdr_devices));
+	sffsdr_init_i2c();
+	davinci_serial_init(&uart_config);
+	setup_usb(0, 0); /* We support only peripheral mode. */
+
+	/* mux VLYNQ pins */
+	davinci_cfg_reg(DM644X_VLYNQEN);
+	davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+	/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+	.phys_io      = IO_PHYS,
+	.io_pg_offst  = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params  = (DAVINCI_DDR_BASE + 0x100),
+	.map_io	      = davinci_sffsdr_map_io,
+	.init_irq     = davinci_sffsdr_irq_init,
+	.timer	      = &davinci_timer,
+	.init_machine = davinci_sffsdr_init,
+MACHINE_END