From ec8542cb8a628fd10522f8421182207277f90185 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Sun, 29 Jan 2017 20:40:59 +0200 Subject: [PATCH 01/29] ARM: dts: bcm2835: fix uart0 pinctrl node names Downstream kernel uses pins 32, 33 as UART0 (PL011) Rx/Tx to communicate with the Bluetooth chip. So ALT3 of these pins is most likely not CTS/RTS. Change the node name to reflect that. This matches section 6.2 "Alternative Function Assignments" in the BCM2835 ARM Peripherals document. With this change in place, adding &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>; status = "okay"; }; to bcm2837-rpi-3-b.dts does the right thing on my Raspberry Pi 3. Pins 30, 31 are CTS/RTS of UART0 in alternate function 3. Rename uart0_gpio30 as well. While at it, fix a little typo in a nearby comment. Fixes: 21ff843931b ("ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.") Acked-by: Stefan Wahren Signed-off-by: Baruch Siach Reviewed-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 35cea3fcaf5c..e9623af3ad76 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -295,17 +295,17 @@ /* Separate from the uart0_gpio14 group * because it conflicts with spi1_gpio16, and * people often run uart0 on the two pins - * without flow contrl. + * without flow control. */ uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 { brcm,pins = <16 17>; brcm,function = ; }; - uart0_gpio30: uart0_gpio30 { + uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 { brcm,pins = <30 31>; brcm,function = ; }; - uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 { + uart0_gpio32: uart0_gpio32 { brcm,pins = <32 33>; brcm,function = ; }; From 843b2287fb77f0b1966fa90912e093a0d417b27b Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Sun, 29 Jan 2017 21:53:10 +0200 Subject: [PATCH 02/29] ARM: dts: bcm2835: fix i2c0 pins According to the BCM2835 ARM Peripherals document i2c0 doesn't map to pins 32, 34 but to 28, 29. Fixes: 21ff843931b ("ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.") Signed-off-by: Baruch Siach Reviewed-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index e9623af3ad76..7b4880dc291a 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -198,8 +198,8 @@ brcm,pins = <0 1>; brcm,function = ; }; - i2c0_gpio32: i2c0_gpio32 { - brcm,pins = <32 34>; + i2c0_gpio28: i2c0_gpio28 { + brcm,pins = <28 29>; brcm,function = ; }; i2c0_gpio44: i2c0_gpio44 { From e1be65a5e426460ab567076107311e83532904e9 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Sun, 29 Jan 2017 21:53:11 +0200 Subject: [PATCH 03/29] ARM: dts: bcm2835: fix uart0/uart1 pins According to the BCM2835 ARM Peripherals document uart1 doesn't map to pins 36-39, but uart0 does. Also, split into separate Rx/Tx and CST/RTS groups to match other uart nodes. Fixes: 21ff843931b ("ARM: dts: bcm283x: Define standard pinctrl groups in the gpio node.") Signed-off-by: Baruch Siach Reviewed-by: Eric Anholt --- arch/arm/boot/dts/bcm283x.dtsi | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index 7b4880dc291a..561f27d8d922 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -309,6 +309,14 @@ brcm,pins = <32 33>; brcm,function = ; }; + uart0_gpio36: uart0_gpio36 { + brcm,pins = <36 37>; + brcm,function = ; + }; + uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 { + brcm,pins = <38 39>; + brcm,function = ; + }; uart1_gpio14: uart1_gpio14 { brcm,pins = <14 15>; @@ -326,10 +334,6 @@ brcm,pins = <30 31>; brcm,function = ; }; - uart1_gpio36: uart1_gpio36 { - brcm,pins = <36 37 38 39>; - brcm,function = ; - }; uart1_gpio40: uart1_gpio40 { brcm,pins = <40 41>; brcm,function = ; From 10b6c0c2e2bb8cd1be682f8d36ef597e3419cb88 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Mon, 30 Jan 2017 20:44:39 +0200 Subject: [PATCH 04/29] ARM: dts: bcm2835: add index to the ethernet alias An alias name should have an index number even when it is the only of its type. This allows U-Boot to add the local-mac-address property. Otherwise U-Boot skips the alias. Fixes: 6a93792774 ("ARM: bcm2835: dt: Add the ethernet to the device trees") Signed-off-by: Baruch Siach Acked-by: Lubomir Rintel Reviewed-by: Eric Anholt --- arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi | 2 +- arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi index 12c981e51134..9a0599f711ff 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9512.dtsi @@ -1,6 +1,6 @@ / { aliases { - ethernet = ðernet; + ethernet0 = ðernet; }; }; diff --git a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi index 3f0a56ebcf1f..dc7ae776db5f 100644 --- a/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi +++ b/arch/arm/boot/dts/bcm283x-rpi-smsc9514.dtsi @@ -1,6 +1,6 @@ / { aliases { - ethernet = ðernet; + ethernet0 = ðernet; }; }; From d2718d1365f7fce624fd7ed163f60532f92ed016 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 5 Apr 2017 17:18:03 +0200 Subject: [PATCH 05/29] arm64: marvell: enable the Armada 37xx pinctrl driver This commit makes sure the driver for the Armada 37xx pin controller is enabled. Signed-off-by: Gregory CLEMENT --- arch/arm64/Kconfig.platforms | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 129cc5ae4091..9aa71a3f3f50 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -103,8 +103,13 @@ config ARCH_MVEBU select ARMADA_AP806_SYSCON select ARMADA_CP110_SYSCON select ARMADA_37XX_CLK + select GPIOLIB + select GPIOLIB_IRQCHIP select MVEBU_ODMI select MVEBU_PIC + select OF_GPIO + select PINCTRL + select PINCTRL_ARMADA_37XX help This enables support for Marvell EBU familly, including: - Armada 3700 SoC Family From 7b4ccb3c466f62bbf2f4dd5d6a143d945a6f3051 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 25 Apr 2017 19:36:25 +0200 Subject: [PATCH 06/29] soc: renesas: Provide dummy rcar_rst_read_mode_pins() for compile-testing If the R-Car RST driver is not included, compile-testing R-Car clock drivers fails with a link error: undefined reference to `rcar_rst_read_mode_pins' To fix this, provide a dummy version. Use the exact same test logic as in drivers/soc/renesas/Makefile, as there is no Kconfig symbol (yet) to control compilation of the R-Car RST driver. Fixes: 527c02f66d263d2e ("soc: renesas: Add R-Car RST driver") Signed-off-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- include/linux/soc/renesas/rcar-rst.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/include/linux/soc/renesas/rcar-rst.h b/include/linux/soc/renesas/rcar-rst.h index a18e0783946b..787e7ad53d45 100644 --- a/include/linux/soc/renesas/rcar-rst.h +++ b/include/linux/soc/renesas/rcar-rst.h @@ -1,6 +1,11 @@ #ifndef __LINUX_SOC_RENESAS_RCAR_RST_H__ #define __LINUX_SOC_RENESAS_RCAR_RST_H__ +#if defined(CONFIG_ARCH_RCAR_GEN1) || defined(CONFIG_ARCH_RCAR_GEN2) || \ + defined(CONFIG_ARCH_R8A7795) || defined(CONFIG_ARCH_R8A7796) int rcar_rst_read_mode_pins(u32 *mode); +#else +static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; } +#endif #endif /* __LINUX_SOC_RENESAS_RCAR_RST_H__ */ From afda007feda5cfe7463f3281dfeee703a5dc7ca3 Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 5 Apr 2017 17:18:07 +0200 Subject: [PATCH 07/29] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 Add the nodes for the two pin controller present in the Armada 37xx SoCs. Initially the node was named gpio1 using the same name that for the register range in the datasheet. However renaming it pinctr_nb (nb for North Bridge) makes more sens. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 42 ++++++++++++++++++-- 1 file changed, 39 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 311b97c80c7b..e6216cbd4b38 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -161,10 +161,29 @@ #clock-cells = <1>; }; - gpio1: gpio@13800 { - compatible = "marvell,mvebu-gpio-3700", + pinctrl_nb: pinctrl@13800 { + compatible = "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd"; - reg = <0x13800 0x500>; + reg = <0x13800 0x100>, <0x13C00 0x20>; + gpionb: gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nb 0 0 36>; + gpio-controller; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + ; + + }; xtalclk: xtal-clk { compatible = "marvell,armada-3700-xtal-clock"; @@ -173,6 +192,23 @@ }; }; + pinctrl_sb: pinctrl@18800 { + compatible = "marvell,armada3710-sb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + gpiosb: gpio { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-controller; + interrupts = + , + , + , + , + ; + }; + }; + eth0: ethernet@30000 { compatible = "marvell,armada-3700-neta"; reg = <0x30000 0x4000>; From 6a680783aaadd168557eec695374929ac066536f Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Wed, 14 Dec 2016 17:43:48 +0100 Subject: [PATCH 08/29] ARM64: dts: marvell: armada37xx: add pinctrl definition Start to populate the device tree of the Armada 37xx with the pincontrol configuration used on the board providing a dts. Signed-off-by: Gregory CLEMENT --- .../arm64/boot/dts/marvell/armada-3720-db.dts | 8 +++++ arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 31 +++++++++++++++++++ 2 files changed, 39 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 950cbd23a5bd..01cdcb98416f 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -79,6 +79,8 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; gpio_exp: pca9555@22 { @@ -113,6 +115,8 @@ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; m25p80@0 { compatible = "jedec,spi-nor"; @@ -143,6 +147,8 @@ /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; status = "okay"; }; @@ -178,6 +184,8 @@ }; ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; phy = <&phy0>; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index e6216cbd4b38..f581c74c0bb2 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -190,6 +190,31 @@ clock-output-names = "xtal"; #clock-cells = <0>; }; + + spi_quad_pins: spi-quad-pins { + groups = "spi_quad"; + function = "spi"; + }; + + i2c1_pins: i2c1-pins { + groups = "i2c1"; + function = "i2c"; + }; + + i2c2_pins: i2c2-pins { + groups = "i2c2"; + function = "i2c"; + }; + + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart"; + }; }; pinctrl_sb: pinctrl@18800 { @@ -207,6 +232,12 @@ , ; }; + + rgmii_pins: mii-pins { + groups = "rgmii"; + function = "mii"; + }; + }; eth0: ethernet@30000 { From 7e6c7fe95e3d0be80d0d05a2efde5c8fb97602ba Mon Sep 17 00:00:00 2001 From: John Crispin Date: Wed, 26 Apr 2017 17:25:50 +0800 Subject: [PATCH 09/29] arm: dts: mt7623: add clock-frequency to the a7 timer node to mt7623.dtsi We need to tell the driver what the timers frequency is and that the core has not be configured by the bootrom. Not doing so makes the unit not boot. Signed-off-by: John Crispin Signed-off-by: Sean Wang Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt7623.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 402579ab70d2..3a9e9b6aea68 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -72,6 +72,8 @@ , , ; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; }; watchdog: watchdog@10007000 { From 1c0803652d82b9a62980886e019c9f70576028a5 Mon Sep 17 00:00:00 2001 From: yong mao Date: Wed, 15 Mar 2017 15:26:39 +0800 Subject: [PATCH 10/29] ARM64: dts: mediatek: configure some fixed mmc parameters configure some fixed mmc parameters Signed-off-by: Yong Mao Signed-off-by: Chaotian Jing Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 0ecaad4333a7..1c3634fa94bf 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -134,6 +134,9 @@ bus-width = <8>; max-frequency = <50000000>; cap-mmc-highspeed; + mediatek,hs200-cmd-int-delay=<26>; + mediatek,hs400-cmd-int-delay=<14>; + mediatek,hs400-cmd-resp-sel-rising; vmmc-supply = <&mt6397_vemc_3v3_reg>; vqmmc-supply = <&mt6397_vio18_reg>; non-removable; From 6f92120892d94ef6c551da5aa2cf7bc9401c9903 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 21 Apr 2017 23:55:28 +0200 Subject: [PATCH 11/29] ARM: omap2+: make omap4_get_cpu1_ns_pa_addr declaration usable When CONFIG_PM is disabled, we get a build error: arch/arm/mach-omap2/omap-smp.c: In function 'omap4_smp_maybe_reset_cpu1': arch/arm/mach-omap2/omap-smp.c:309:20: error: implicit declaration of function 'omap4_get_cpu1_ns_pa_addr'; did you mean 'omap4_get_scu_base'? [-Werror=implicit-function-declaration] We need to fix this in multiple files, to ensure the declaration is visible, to actually build the function without CONFIG_PM, and to only call it when OMAP4 and/or OMAP5 are enabled. Fixes: 351b7c490700 ("ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot") Signed-off-by: Arnd Bergmann Acked-by: Tony Lindgren --- arch/arm/mach-omap2/common.h | 3 ++- arch/arm/mach-omap2/omap-mpuss-lowpower.c | 10 +++++----- arch/arm/mach-omap2/omap-smp.c | 11 +++++++---- 3 files changed, 14 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index 3089d3bfa19b..8cc6338fcb12 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -266,11 +266,12 @@ extern int omap4_cpu_kill(unsigned int cpu); extern const struct smp_operations omap4_smp_ops; #endif +extern u32 omap4_get_cpu1_ns_pa_addr(void); + #if defined(CONFIG_SMP) && defined(CONFIG_PM) extern int omap4_mpuss_init(void); extern int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state); extern int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state); -extern u32 omap4_get_cpu1_ns_pa_addr(void); #else static inline int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state) diff --git a/arch/arm/mach-omap2/omap-mpuss-lowpower.c b/arch/arm/mach-omap2/omap-mpuss-lowpower.c index 03ec6d307c82..4cfc4f9b2c69 100644 --- a/arch/arm/mach-omap2/omap-mpuss-lowpower.c +++ b/arch/arm/mach-omap2/omap-mpuss-lowpower.c @@ -213,11 +213,6 @@ static void __init save_l2x0_context(void) {} #endif -u32 omap4_get_cpu1_ns_pa_addr(void) -{ - return old_cpu1_ns_pa_addr; -} - /** * omap4_enter_lowpower: OMAP4 MPUSS Low Power Entry Function * The purpose of this function is to manage low power programming @@ -457,6 +452,11 @@ int __init omap4_mpuss_init(void) #endif +u32 omap4_get_cpu1_ns_pa_addr(void) +{ + return old_cpu1_ns_pa_addr; +} + /* * For kexec, we must set CPU1_WAKEUP_NS_PA_ADDR to point to * current kernel's secondary_startup() early before diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 3faf454ba487..33e4953c61a8 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -306,7 +306,6 @@ static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c) cpu1_startup_pa = readl_relaxed(cfg.wakeupgen_base + OMAP_AUX_CORE_BOOT_1); - cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr(); /* Did the configured secondary_startup() get overwritten? */ if (!omap4_smp_cpu1_startup_valid(cpu1_startup_pa)) @@ -316,9 +315,13 @@ static void __init omap4_smp_maybe_reset_cpu1(struct omap_smp_config *c) * If omap4 or 5 has NS_PA_ADDR configured, CPU1 may be in a * deeper idle state in WFI and will wake to an invalid address. */ - if ((soc_is_omap44xx() || soc_is_omap54xx()) && - !omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr)) - needs_reset = true; + if ((soc_is_omap44xx() || soc_is_omap54xx())) { + cpu1_ns_pa_addr = omap4_get_cpu1_ns_pa_addr(); + if (!omap4_smp_cpu1_startup_valid(cpu1_ns_pa_addr)) + needs_reset = true; + } else { + cpu1_ns_pa_addr = 0; + } if (!needs_reset || !c->cpu1_rstctrl_va) return; From e84188852a7239d7a144af12f7e5dac8fa88600b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 10 May 2017 21:05:16 +0200 Subject: [PATCH 12/29] tee: add ARM_SMCCC dependency For the moment, the tee subsystem only makes sense in combination with the op-tee driver that depends on ARM_SMCCC, so let's hide the subsystem from users that can't select that. Suggested-by: Linus Torvalds Signed-off-by: Arnd Bergmann --- drivers/tee/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tee/Kconfig b/drivers/tee/Kconfig index 2330a4eb4e8b..a6df12d88f90 100644 --- a/drivers/tee/Kconfig +++ b/drivers/tee/Kconfig @@ -1,6 +1,7 @@ # Generic Trusted Execution Environment Configuration config TEE tristate "Trusted Execution Environment support" + depends on HAVE_ARM_SMCCC || COMPILE_TEST select DMA_SHARED_BUFFER select GENERIC_ALLOCATOR help From 31d848aa1d85530770f0bdf1b61a042335d340ad Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Wed, 19 Apr 2017 09:58:23 -0700 Subject: [PATCH 13/29] soc: bcm: brcmstb: Correctly match 7435 SoC Remove the duplicate brcm,bcm7425-sun-top-ctrl compatible string and replace it with brcm,bcm7435-sun-top-ctrl which was intended. Fixes: bd0faf08dc7f ("soc: bcm: brcmstb: Match additional compatible strings") Reported-by: Andreas Oberritter Acked-by: Gregory Fong Signed-off-by: Florian Fainelli --- drivers/soc/bcm/brcmstb/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/soc/bcm/brcmstb/common.c b/drivers/soc/bcm/brcmstb/common.c index b6195fdf0d00..22e98a90468c 100644 --- a/drivers/soc/bcm/brcmstb/common.c +++ b/drivers/soc/bcm/brcmstb/common.c @@ -49,7 +49,7 @@ static const struct of_device_id sun_top_ctrl_match[] = { { .compatible = "brcm,bcm7420-sun-top-ctrl", }, { .compatible = "brcm,bcm7425-sun-top-ctrl", }, { .compatible = "brcm,bcm7429-sun-top-ctrl", }, - { .compatible = "brcm,bcm7425-sun-top-ctrl", }, + { .compatible = "brcm,bcm7435-sun-top-ctrl", }, { .compatible = "brcm,brcmstb-sun-top-ctrl", }, { } }; From 2fe4bff3516924a37e083e3211364abe59db1161 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 12 Apr 2017 18:31:18 -0300 Subject: [PATCH 14/29] ARM: dts: imx53-qsrb: Pulldown PMIC IRQ pin Currently the following errors are seen: [ 14.015056] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.321093] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.411681] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 27.456281] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 30.527106] mc13xxx 0-0008: Failed to read IRQ status: -6 [ 36.596900] mc13xxx 0-0008: Failed to read IRQ status: -6 Also when reading the interrupts via 'cat /proc/interrupts' the PMIC GPIO interrupt counter does not stop increasing. The reason for the storm of interrupts is that the PUS field of register IOMUXC_SW_PAD_CTL_PAD_CSI0_DAT5 is currently configured as: 10 : 100k pullup and the PMIC interrupt is being registered as IRQ_TYPE_LEVEL_HIGH type, which is the correct type as per the MC34708 datasheet. Use the default power on value for the IOMUX, which sets PUS field as: 00: 360k pull down This prevents the spurious PMIC interrupts from happening. Commit e1ffceb078c6 ("ARM: imx53: qsrb: fix PMIC interrupt level") correctly described the irq type as IRQ_TYPE_LEVEL_HIGH, but missed to update the IOMUX of the PMIC GPIO as pull down. Fixes: e1ffceb078c6 ("ARM: imx53: qsrb: fix PMIC interrupt level") Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-qsrb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53-qsrb.dts b/arch/arm/boot/dts/imx53-qsrb.dts index de2215832372..4e103a905dc9 100644 --- a/arch/arm/boot/dts/imx53-qsrb.dts +++ b/arch/arm/boot/dts/imx53-qsrb.dts @@ -23,7 +23,7 @@ imx53-qsrb { pinctrl_pmic: pmicgrp { fsl,pins = < - MX53_PAD_CSI0_DAT5__GPIO5_23 0x1e4 /* IRQ */ + MX53_PAD_CSI0_DAT5__GPIO5_23 0x1c4 /* IRQ */ >; }; }; From d8581c7c8be172dac156a19d261f988a72ce596f Mon Sep 17 00:00:00 2001 From: Leonard Crestez Date: Fri, 5 May 2017 14:00:17 +0300 Subject: [PATCH 15/29] ARM: dts: imx6sx-sdb: Remove OPP override The board file for imx6sx-sdb overrides cpufreq operating points to use higher voltages. This is done because the board has a shared rail for VDD_ARM_IN and VDD_SOC_IN and when using LDO bypass the shared voltage needs to be a value suitable for both ARM and SOC. This only applies to LDO bypass mode, a feature not present in upstream. When LDOs are enabled the effect is to use higher voltages than necessary for no good reason. Setting these higher voltages can make some boards fail to boot with ugly semi-random crashes reminiscent of memory corruption. These failures only happen on board rev. C, rev. B is reported to still work. Signed-off-by: Leonard Crestez Fixes: 54183bd7f766 ("ARM: imx6sx-sdb: add revb board and make it default") Cc: stable@vger.kernel.org Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sdb.dts | 17 ----------------- 1 file changed, 17 deletions(-) diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 5bb8fd57e7f5..d71da30c9cff 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -12,23 +12,6 @@ model = "Freescale i.MX6 SoloX SDB RevB Board"; }; -&cpu0 { - operating-points = < - /* kHz uV */ - 996000 1250000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; - fsl,soc-operating-points = < - /* ARM kHz SOC uV */ - 996000 1250000 - 792000 1175000 - 396000 1175000 - 198000 1175000 - >; -}; - &i2c1 { clock-frequency = <100000>; pinctrl-names = "default"; From e23c7f7d57831fdae444be9d507e67716ab601d4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 May 2017 13:37:47 +0200 Subject: [PATCH 16/29] soc: imx: add PM dependency for IMX7_PM_DOMAINS The new pm domain driver causes a build failure when CONFIG_PM is not set: warning: (IMX7_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM) drivers/base/power/domain_governor.c: In function 'default_suspend_ok': drivers/base/power/domain_governor.c:75:17: error: 'struct dev_pm_info' has no member named 'ignore_children' This adds a dependency to ensure that we don't attempt to build the driver without CONFIG_PM. Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Signed-off-by: Arnd Bergmann Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- drivers/soc/imx/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig index 357a5d8f8da0..a5b86a28f343 100644 --- a/drivers/soc/imx/Kconfig +++ b/drivers/soc/imx/Kconfig @@ -2,8 +2,9 @@ menu "i.MX SoC drivers" config IMX7_PM_DOMAINS bool "i.MX7 PM domains" - select PM_GENERIC_DOMAINS depends on SOC_IMX7D || (COMPILE_TEST && OF) + depends on PM + select PM_GENERIC_DOMAINS default y if SOC_IMX7D endmenu From 7c62de5f3fc92291decc0dac5f36949bdc3fb575 Mon Sep 17 00:00:00 2001 From: Keerthy Date: Thu, 13 Apr 2017 10:21:21 +0530 Subject: [PATCH 17/29] ARM: dts: dra7: Add power hold and power controller properties to palmas Add power hold and power controller properties to palmas node. This is needed to shutdown pmic correctly on boards with powerhold set. Signed-off-by: Keerthy Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4bc4b575c99b..31a9e061ddd0 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -204,6 +204,8 @@ tps659038: tps659038@58 { compatible = "ti,tps659038"; reg = <0x58>; + ti,palmas-override-powerhold; + ti,system-power-controller; tps659038_pmic { compatible = "ti,tps659038-pmic"; From 910958b65cf638347e6c8f65d1f749d6a4cfb7e3 Mon Sep 17 00:00:00 2001 From: Andreas Kemnade Date: Fri, 28 Apr 2017 12:27:35 +0200 Subject: [PATCH 18/29] ARM: dts: gta04: fix polarity of clocks for mcbsp4 The clock polarity setting of the mcbsp connected to the modem was wrong so almost only noise was received. With this patch it is also the same as it was on earlier non-dt kernels where it was working properly Signed-off-by: Andreas Kemnade Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-gta04.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index b3a8b1f24499..9ec737069369 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -55,7 +55,8 @@ simple-audio-card,bitclock-master = <&telephony_link_master>; simple-audio-card,frame-master = <&telephony_link_master>; simple-audio-card,format = "i2s"; - + simple-audio-card,bitclock-inversion; + simple-audio-card,frame-inversion; simple-audio-card,cpu { sound-dai = <&mcbsp4>; }; From f0b8dca8336b112d23be9fa9c0d38cc4eb733344 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 May 2017 08:10:07 -0700 Subject: [PATCH 19/29] ARM: dts: omap4: enable CEC pin for Pandaboard A4 and ES The CEC pin was always pulled up, making it impossible to use it. Change to PIN_INPUT so it can be used by the new CEC support. Signed-off-by: Hans Verkuil Reviewed-by: Tomi Valkeinen --- arch/arm/boot/dts/omap4-panda-a4.dts | 2 +- arch/arm/boot/dts/omap4-panda-es.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 78d363177762..f1a6476af371 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -13,7 +13,7 @@ /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 119f8e657edc..940fe4f7c5f6 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -34,7 +34,7 @@ /* PandaboardES has external pullups on SCL & SDA */ &dss_hdmi_pins { pinctrl-single,pins = < - OMAP4_IOPAD(0x09a, PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0) /* hdmi_cec.hdmi_cec */ OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0) /* hdmi_scl.hdmi_scl */ OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0) /* hdmi_sda.hdmi_sda */ >; From 56322e123235370f1449c7444e311cce857d12f5 Mon Sep 17 00:00:00 2001 From: Adam Ford Date: Thu, 11 May 2017 12:21:19 -0500 Subject: [PATCH 20/29] ARM: dts: LogicPD Torpedo: Fix camera pin mux Fix commit 05c4ffc3a266 ("ARM: dts: LogicPD Torpedo: Add MT9P031 Support") In the previous commit, I indicated that the only testing was done by showing the camera showed up when probing. This patch fixes an incorrect pin muxing on cam_d0, cam_d1 and cam_d2. Signed-off-by: Adam Ford Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 08cce17a25a0..43e9364083de 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -249,9 +249,9 @@ OMAP3_CORE1_IOPAD(0x2110, PIN_INPUT | MUX_MODE0) /* cam_xclka.cam_xclka */ OMAP3_CORE1_IOPAD(0x2112, PIN_INPUT | MUX_MODE0) /* cam_pclk.cam_pclk */ - OMAP3_CORE1_IOPAD(0x2114, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ - OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ - OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ + OMAP3_CORE1_IOPAD(0x2116, PIN_INPUT | MUX_MODE0) /* cam_d0.cam_d0 */ + OMAP3_CORE1_IOPAD(0x2118, PIN_INPUT | MUX_MODE0) /* cam_d1.cam_d1 */ + OMAP3_CORE1_IOPAD(0x211a, PIN_INPUT | MUX_MODE0) /* cam_d2.cam_d2 */ OMAP3_CORE1_IOPAD(0x211c, PIN_INPUT | MUX_MODE0) /* cam_d3.cam_d3 */ OMAP3_CORE1_IOPAD(0x211e, PIN_INPUT | MUX_MODE0) /* cam_d4.cam_d4 */ OMAP3_CORE1_IOPAD(0x2120, PIN_INPUT | MUX_MODE0) /* cam_d5.cam_d5 */ From aff523fb82696f59b197ea79ea3652c216dbe4c0 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 5 May 2017 15:37:06 -0700 Subject: [PATCH 21/29] memory: omap-gpmc: Fix debug output for access width The width needs to be configured in bytes with 1 meaning 8-bit access and 2 meaning 16-bit access. Cc: Peter Ujfalusi Acked-by: Roger Quadros Signed-off-by: Tony Lindgren --- drivers/memory/omap-gpmc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/memory/omap-gpmc.c b/drivers/memory/omap-gpmc.c index bf0fe0137dfe..6d1b4b707cc2 100644 --- a/drivers/memory/omap-gpmc.c +++ b/drivers/memory/omap-gpmc.c @@ -512,7 +512,7 @@ static void gpmc_cs_show_timings(int cs, const char *desc) pr_info("gpmc cs%i access configuration:\n", cs); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity"); GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data"); - GPMC_GET_RAW_MAX(GPMC_CS_CONFIG1, 12, 13, + GPMC_GET_RAW_SHIFT_MAX(GPMC_CS_CONFIG1, 12, 13, 1, GPMC_CONFIG1_DEVICESIZE_MAX, "device-width"); GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin"); GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write"); From bca5238816939436d72ae6bab124c4b0641a3a99 Mon Sep 17 00:00:00 2001 From: Ravikumar Kattekola Date: Wed, 17 May 2017 06:51:38 -0700 Subject: [PATCH 22/29] ARM: dts: dra7: Reduce cpu thermal shutdown temperature MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On dra7, as per TRM, the HW shutdown (TSHUT) temperature is hardcoded to 123C and cannot be modified by SW. This means when the temperature reaches 123C HW asserts TSHUT output which signals a warm reset. This reset is held until the temperature goes below the TSHUT low (105C). While in SW, the thermal driver continuously monitors current temperature and takes decisions based on whether it reached an alert or a critical point. The intention of setting a SW critical point is to prevent force reset by HW and instead do an orderly_poweroff(). But if the SW critical temperature is greater than or equal to that of HW then it defeats the purpose. To address this and let SW take action before HW does keep the SW critical temperature less than HW TSHUT value. The value for SW critical temperature was chosen as 120C just to ensure we give SW sometime before HW catches up. Document reference SPRUI30C – DRA75x, DRA74x Technical Reference Manual - November 2016 SPRUHZ6H - AM572x Technical Reference Manual - November 2016 Tested on: DRA75x PG 2.0 Rev H EVM Signed-off-by: Ravikumar Kattekola Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 57892f264cea..e7144662af45 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -2017,4 +2017,8 @@ coefficients = <0 2000>; }; +&cpu_crit { + temperature = <120000>; /* milli Celsius */ +}; + /include/ "dra7xx-clocks.dtsi" From d5d332d3f7e8435e264a71b90178dee69428d630 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Fri, 12 May 2017 20:13:26 -0700 Subject: [PATCH 23/29] devicetree: Move include prefixes from arch to separate directory We use a directory under arch/$ARCH/boot/dts as an include path that has links outside of the subtree to find dt-bindings from under include/dt-bindings. That's been working well, but new DT architectures haven't been adding them by default. Recently there's been a desire to share some of the DT material between arm and arm64, which originally caused developers to create symlinks or relative includes between the subtrees. This isn't ideal -- it breaks if the DT files aren't stored in the exact same hierarchy as the kernel tree, and generally it's just icky. As a somewhat cleaner solution we decided to add a $ARCH/ prefix link once, and allow DTS files to reference dtsi (and dts) files in other architectures that way. Original approach was to create these links under each architecture, but it lead to the problem of recursive symlinks. As a remedy, move the include link directories out of the architecture trees into a common location. At the same time, they can now share one directory and one dt-bindings/ link as well. Fixes: 4027494ae6e3 ('ARM: dts: add arm/arm64 include symlinks') Reported-by: Russell King Reported-by: Omar Sandoval Reviewed-by: Heiko Stuebner Reviewed-by: Masahiro Yamada Tested-by: Heiko Stuebner Acked-by: Rob Herring Cc: Heiko Stuebner Cc: Mark Rutland Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Mikael Starvik Cc: Jesper Nilsson Cc: James Hogan Cc: Ralf Baechle Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Frank Rowand Cc: linux-arch Signed-off-by: Olof Johansson --- arch/arm/boot/dts/include/arm | 1 - arch/arm/boot/dts/include/arm64 | 1 - arch/arm/boot/dts/include/dt-bindings | 1 - arch/arm64/boot/dts/include/arm | 1 - arch/arm64/boot/dts/include/arm64 | 1 - arch/arm64/boot/dts/include/dt-bindings | 1 - arch/cris/boot/dts/include/dt-bindings | 1 - arch/metag/boot/dts/include/dt-bindings | 1 - arch/mips/boot/dts/include/dt-bindings | 1 - arch/powerpc/boot/dts/include/dt-bindings | 1 - scripts/Makefile.lib | 2 +- scripts/dtc/include-prefixes/arc | 1 + scripts/dtc/include-prefixes/arm | 1 + scripts/dtc/include-prefixes/arm64 | 1 + scripts/dtc/include-prefixes/c6x | 1 + scripts/dtc/include-prefixes/cris | 1 + scripts/dtc/include-prefixes/dt-bindings | 1 + scripts/dtc/include-prefixes/h8300 | 1 + scripts/dtc/include-prefixes/metag | 1 + scripts/dtc/include-prefixes/microblaze | 1 + scripts/dtc/include-prefixes/mips | 1 + scripts/dtc/include-prefixes/nios2 | 1 + scripts/dtc/include-prefixes/openrisc | 1 + scripts/dtc/include-prefixes/powerpc | 1 + scripts/dtc/include-prefixes/sh | 1 + scripts/dtc/include-prefixes/xtensa | 1 + 26 files changed, 16 insertions(+), 11 deletions(-) delete mode 120000 arch/arm/boot/dts/include/arm delete mode 120000 arch/arm/boot/dts/include/arm64 delete mode 120000 arch/arm/boot/dts/include/dt-bindings delete mode 120000 arch/arm64/boot/dts/include/arm delete mode 120000 arch/arm64/boot/dts/include/arm64 delete mode 120000 arch/arm64/boot/dts/include/dt-bindings delete mode 120000 arch/cris/boot/dts/include/dt-bindings delete mode 120000 arch/metag/boot/dts/include/dt-bindings delete mode 120000 arch/mips/boot/dts/include/dt-bindings delete mode 120000 arch/powerpc/boot/dts/include/dt-bindings create mode 120000 scripts/dtc/include-prefixes/arc create mode 120000 scripts/dtc/include-prefixes/arm create mode 120000 scripts/dtc/include-prefixes/arm64 create mode 120000 scripts/dtc/include-prefixes/c6x create mode 120000 scripts/dtc/include-prefixes/cris create mode 120000 scripts/dtc/include-prefixes/dt-bindings create mode 120000 scripts/dtc/include-prefixes/h8300 create mode 120000 scripts/dtc/include-prefixes/metag create mode 120000 scripts/dtc/include-prefixes/microblaze create mode 120000 scripts/dtc/include-prefixes/mips create mode 120000 scripts/dtc/include-prefixes/nios2 create mode 120000 scripts/dtc/include-prefixes/openrisc create mode 120000 scripts/dtc/include-prefixes/powerpc create mode 120000 scripts/dtc/include-prefixes/sh create mode 120000 scripts/dtc/include-prefixes/xtensa diff --git a/arch/arm/boot/dts/include/arm b/arch/arm/boot/dts/include/arm deleted file mode 120000 index a96aa0ea9d8c..000000000000 --- a/arch/arm/boot/dts/include/arm +++ /dev/null @@ -1 +0,0 @@ -.. \ No newline at end of file diff --git a/arch/arm/boot/dts/include/arm64 b/arch/arm/boot/dts/include/arm64 deleted file mode 120000 index 074a835fca3e..000000000000 --- a/arch/arm/boot/dts/include/arm64 +++ /dev/null @@ -1 +0,0 @@ -../../../../arm64/boot/dts \ No newline at end of file diff --git a/arch/arm/boot/dts/include/dt-bindings b/arch/arm/boot/dts/include/dt-bindings deleted file mode 120000 index 08c00e4972fa..000000000000 --- a/arch/arm/boot/dts/include/dt-bindings +++ /dev/null @@ -1 +0,0 @@ -../../../../../include/dt-bindings \ No newline at end of file diff --git a/arch/arm64/boot/dts/include/arm b/arch/arm64/boot/dts/include/arm deleted file mode 120000 index cf63d80e2b93..000000000000 --- a/arch/arm64/boot/dts/include/arm +++ /dev/null @@ -1 +0,0 @@ -../../../../arm/boot/dts \ No newline at end of file diff --git a/arch/arm64/boot/dts/include/arm64 b/arch/arm64/boot/dts/include/arm64 deleted file mode 120000 index a96aa0ea9d8c..000000000000 --- a/arch/arm64/boot/dts/include/arm64 +++ /dev/null @@ -1 +0,0 @@ -.. \ No newline at end of file diff --git a/arch/arm64/boot/dts/include/dt-bindings b/arch/arm64/boot/dts/include/dt-bindings deleted file mode 120000 index 08c00e4972fa..000000000000 --- a/arch/arm64/boot/dts/include/dt-bindings +++ /dev/null @@ -1 +0,0 @@ -../../../../../include/dt-bindings \ No newline at end of file diff --git a/arch/cris/boot/dts/include/dt-bindings b/arch/cris/boot/dts/include/dt-bindings deleted file mode 120000 index 08c00e4972fa..000000000000 --- a/arch/cris/boot/dts/include/dt-bindings +++ /dev/null @@ -1 +0,0 @@ -../../../../../include/dt-bindings \ No newline at end of file diff --git a/arch/metag/boot/dts/include/dt-bindings b/arch/metag/boot/dts/include/dt-bindings deleted file mode 120000 index 08c00e4972fa..000000000000 --- a/arch/metag/boot/dts/include/dt-bindings +++ /dev/null @@ -1 +0,0 @@ -../../../../../include/dt-bindings \ No newline at end of file diff --git a/arch/mips/boot/dts/include/dt-bindings b/arch/mips/boot/dts/include/dt-bindings deleted file mode 120000 index 08c00e4972fa..000000000000 --- a/arch/mips/boot/dts/include/dt-bindings +++ /dev/null @@ -1 +0,0 @@ -../../../../../include/dt-bindings \ No newline at end of file diff --git a/arch/powerpc/boot/dts/include/dt-bindings b/arch/powerpc/boot/dts/include/dt-bindings deleted file mode 120000 index 08c00e4972fa..000000000000 --- a/arch/powerpc/boot/dts/include/dt-bindings +++ /dev/null @@ -1 +0,0 @@ -../../../../../include/dt-bindings \ No newline at end of file diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib index 6dc1eda13b8e..58c05e5d9870 100644 --- a/scripts/Makefile.lib +++ b/scripts/Makefile.lib @@ -175,7 +175,7 @@ ld_flags = $(LDFLAGS) $(ldflags-y) dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \ -I$(srctree)/arch/$(SRCARCH)/boot/dts \ - -I$(srctree)/arch/$(SRCARCH)/boot/dts/include \ + -I$(srctree)/scripts/dtc/include-prefixes \ -I$(srctree)/drivers/of/testcase-data \ -undef -D__DTS__ diff --git a/scripts/dtc/include-prefixes/arc b/scripts/dtc/include-prefixes/arc new file mode 120000 index 000000000000..5d21b5a69a11 --- /dev/null +++ b/scripts/dtc/include-prefixes/arc @@ -0,0 +1 @@ +../../../arch/arc/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/arm b/scripts/dtc/include-prefixes/arm new file mode 120000 index 000000000000..eb14d4515a57 --- /dev/null +++ b/scripts/dtc/include-prefixes/arm @@ -0,0 +1 @@ +../../../arch/arm/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/arm64 b/scripts/dtc/include-prefixes/arm64 new file mode 120000 index 000000000000..275c42c21d71 --- /dev/null +++ b/scripts/dtc/include-prefixes/arm64 @@ -0,0 +1 @@ +../../../arch/arm64/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/c6x b/scripts/dtc/include-prefixes/c6x new file mode 120000 index 000000000000..49ded4cae2be --- /dev/null +++ b/scripts/dtc/include-prefixes/c6x @@ -0,0 +1 @@ +../../../arch/c6x/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/cris b/scripts/dtc/include-prefixes/cris new file mode 120000 index 000000000000..736d998ba506 --- /dev/null +++ b/scripts/dtc/include-prefixes/cris @@ -0,0 +1 @@ +../../../arch/cris/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/dt-bindings b/scripts/dtc/include-prefixes/dt-bindings new file mode 120000 index 000000000000..04fdbb3af016 --- /dev/null +++ b/scripts/dtc/include-prefixes/dt-bindings @@ -0,0 +1 @@ +../../../include/dt-bindings \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/h8300 b/scripts/dtc/include-prefixes/h8300 new file mode 120000 index 000000000000..3bdaa332c54c --- /dev/null +++ b/scripts/dtc/include-prefixes/h8300 @@ -0,0 +1 @@ +../../../arch/h8300/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/metag b/scripts/dtc/include-prefixes/metag new file mode 120000 index 000000000000..87a3c847db8f --- /dev/null +++ b/scripts/dtc/include-prefixes/metag @@ -0,0 +1 @@ +../../../arch/metag/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/microblaze b/scripts/dtc/include-prefixes/microblaze new file mode 120000 index 000000000000..d9830330a21d --- /dev/null +++ b/scripts/dtc/include-prefixes/microblaze @@ -0,0 +1 @@ +../../../arch/microblaze/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/mips b/scripts/dtc/include-prefixes/mips new file mode 120000 index 000000000000..ae8d4948dc8d --- /dev/null +++ b/scripts/dtc/include-prefixes/mips @@ -0,0 +1 @@ +../../../arch/mips/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/nios2 b/scripts/dtc/include-prefixes/nios2 new file mode 120000 index 000000000000..51772336d13f --- /dev/null +++ b/scripts/dtc/include-prefixes/nios2 @@ -0,0 +1 @@ +../../../arch/nios2/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/openrisc b/scripts/dtc/include-prefixes/openrisc new file mode 120000 index 000000000000..71c3bc75c560 --- /dev/null +++ b/scripts/dtc/include-prefixes/openrisc @@ -0,0 +1 @@ +../../../arch/openrisc/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/powerpc b/scripts/dtc/include-prefixes/powerpc new file mode 120000 index 000000000000..7cd6ec16e899 --- /dev/null +++ b/scripts/dtc/include-prefixes/powerpc @@ -0,0 +1 @@ +../../../arch/powerpc/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/sh b/scripts/dtc/include-prefixes/sh new file mode 120000 index 000000000000..67d37808c599 --- /dev/null +++ b/scripts/dtc/include-prefixes/sh @@ -0,0 +1 @@ +../../../arch/sh/boot/dts \ No newline at end of file diff --git a/scripts/dtc/include-prefixes/xtensa b/scripts/dtc/include-prefixes/xtensa new file mode 120000 index 000000000000..d1eaf6ec7a2b --- /dev/null +++ b/scripts/dtc/include-prefixes/xtensa @@ -0,0 +1 @@ +../../../arch/xtensa/boot/dts \ No newline at end of file From 877dd4b1f7986bd7ca31b1e69589289e4aa3e066 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Sun, 14 May 2017 23:45:02 +0200 Subject: [PATCH 24/29] ARM: configs: add a gemini defconfig It makes sense to have a stripped-down defconfig for just Gemini, as it is a pretty small platform used in NAS etc, and will use appended device tree. It is also quick to compile and test. Hopefully this defconfig can be a good base for distributions such as OpenWRT. I plan to add in the config options needed for the different variants of Gemini as we go along. Cc: Janos Laube Cc: Paulius Zaleckas Cc: Hans Ulli Kroll Cc: Florian Fainelli Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm/configs/gemini_defconfig | 68 +++++++++++++++++++++++++++++++ 1 file changed, 68 insertions(+) create mode 100644 arch/arm/configs/gemini_defconfig diff --git a/arch/arm/configs/gemini_defconfig b/arch/arm/configs/gemini_defconfig new file mode 100644 index 000000000000..d2d75fa664a6 --- /dev/null +++ b/arch/arm/configs/gemini_defconfig @@ -0,0 +1,68 @@ +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_NO_HZ_IDLE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_USER_NS=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_PARTITION_ADVANCED=y +CONFIG_ARCH_MULTI_V4=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_GEMINI=y +CONFIG_PCI=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_CMDLINE="console=ttyS0,115200n8" +CONFIG_KEXEC=y +CONFIG_BINFMT_MISC=y +CONFIG_PM=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_MTD=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=16384 +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=1 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_GEMINI_WATCHDOG=y +CONFIG_USB=y +CONFIG_USB_MON=y +CONFIG_USB_FOTG210_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GEMINI=y +CONFIG_DMADEVICES=y +# CONFIG_DNOTIFY is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_ROMFS_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_DEBUG_FS=y From eb1e6716cc9c6fd22e706379ab082b4ac198a1b1 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 17 May 2017 16:52:29 -0500 Subject: [PATCH 25/29] arm64: defconfig: sync with savedefconfig Sync the defconfig with savedefconfig as config options change/move over time. Generated with the following commands: make defconfig make savedefconfig cp defconfig arch/arm64/configs/defconfig Signed-off-by: Rob Herring Signed-off-by: Olof Johansson --- arch/arm64/configs/defconfig | 109 +++++++++++++++-------------------- 1 file changed, 45 insertions(+), 64 deletions(-) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index ce072859e3b2..d916fc316698 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -30,7 +30,6 @@ CONFIG_PROFILING=y CONFIG_JUMP_LABEL=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_ARCH_SUNXI=y CONFIG_ARCH_ALPINE=y @@ -62,16 +61,15 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y -CONFIG_PCI_MSI=y CONFIG_PCI_IOV=y -CONFIG_PCI_AARDVARK=y -CONFIG_PCIE_RCAR=y -CONFIG_PCI_HOST_GENERIC=y -CONFIG_PCI_XGENE=y CONFIG_PCI_LAYERSCAPE=y CONFIG_PCI_HISI=y CONFIG_PCIE_QCOM=y CONFIG_PCIE_ARMADA_8K=y +CONFIG_PCI_AARDVARK=y +CONFIG_PCIE_RCAR=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_PCI_XGENE=y CONFIG_ARM64_VA_BITS_48=y CONFIG_SCHED_MC=y CONFIG_NUMA=y @@ -80,12 +78,11 @@ CONFIG_KSM=y CONFIG_TRANSPARENT_HUGEPAGE=y CONFIG_CMA=y CONFIG_SECCOMP=y -CONFIG_XEN=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y +CONFIG_XEN=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_COMPAT=y -CONFIG_CPU_IDLE=y CONFIG_HIBERNATION=y CONFIG_ARM_CPUIDLE=y CONFIG_CPU_FREQ=y @@ -155,8 +152,8 @@ CONFIG_MTD_SPI_NOR=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=m CONFIG_VIRTIO_BLK=y -CONFIG_EEPROM_AT25=m CONFIG_SRAM=y +CONFIG_EEPROM_AT25=m # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_SCSI_SAS_ATA=y @@ -168,8 +165,8 @@ CONFIG_AHCI_CEVA=y CONFIG_AHCI_MVEBU=y CONFIG_AHCI_XGENE=y CONFIG_AHCI_QORIQ=y -CONFIG_SATA_RCAR=y CONFIG_SATA_SIL24=y +CONFIG_SATA_RCAR=y CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y CONFIG_NETDEVICES=y @@ -186,18 +183,17 @@ CONFIG_HNS_ENET=y CONFIG_E1000E=y CONFIG_IGB=y CONFIG_IGBVF=y -CONFIG_MVPP2=y CONFIG_MVNETA=y +CONFIG_MVPP2=y CONFIG_SKY2=y CONFIG_RAVB=y CONFIG_SMC91X=y CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=m -CONFIG_REALTEK_PHY=m +CONFIG_MDIO_BUS_MUX_MMIOREG=y CONFIG_MESON_GXL_PHY=m CONFIG_MICREL_PHY=y -CONFIG_MDIO_BUS_MUX=y -CONFIG_MDIO_BUS_MUX_MMIOREG=y +CONFIG_REALTEK_PHY=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m CONFIG_USB_RTL8152=m @@ -230,14 +226,14 @@ CONFIG_SERIAL_8250_UNIPHIER=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MESON=y +CONFIG_SERIAL_MESON_CONSOLE=y CONFIG_SERIAL_SAMSUNG=y CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_SH_SCI=y CONFIG_SERIAL_SH_SCI_NR_UARTS=11 CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SERIAL_MESON=y -CONFIG_SERIAL_MESON_CONSOLE=y CONFIG_SERIAL_MSM=y CONFIG_SERIAL_MSM_CONSOLE=y CONFIG_SERIAL_XILINX_PS_UART=y @@ -261,14 +257,14 @@ CONFIG_I2C_UNIPHIER_F=y CONFIG_I2C_RCAR=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_SPI=y -CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_BCM2835=m CONFIG_SPI_BCM2835AUX=m +CONFIG_SPI_MESON_SPIFC=m CONFIG_SPI_ORION=y CONFIG_SPI_PL022=y CONFIG_SPI_QUP=y -CONFIG_SPI_SPIDEV=m CONFIG_SPI_S3C64XX=y +CONFIG_SPI_SPIDEV=m CONFIG_SPMI=y CONFIG_PINCTRL_SINGLE=y CONFIG_PINCTRL_MAX77620=y @@ -286,39 +282,35 @@ CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_MAX77620=y CONFIG_POWER_RESET_MSM=y -CONFIG_BATTERY_BQ27XXX=y CONFIG_POWER_RESET_XGENE=y CONFIG_POWER_RESET_SYSCON=y +CONFIG_BATTERY_BQ27XXX=y +CONFIG_SENSORS_ARM_SCPI=y CONFIG_SENSORS_LM90=m CONFIG_SENSORS_INA2XX=m -CONFIG_SENSORS_ARM_SCPI=y -CONFIG_THERMAL=y -CONFIG_THERMAL_EMULATION=y CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y -CONFIG_BCM2835_THERMAL=y +CONFIG_THERMAL_EMULATION=y CONFIG_EXYNOS_THERMAL=y CONFIG_WATCHDOG=y -CONFIG_BCM2835_WDT=y -CONFIG_RENESAS_WDT=y CONFIG_S3C2410_WATCHDOG=y CONFIG_MESON_GXBB_WATCHDOG=m CONFIG_MESON_WATCHDOG=m -CONFIG_MFD_EXYNOS_LPASS=m -CONFIG_MFD_MAX77620=y -CONFIG_MFD_RK808=y -CONFIG_MFD_SPMI_PMIC=y -CONFIG_MFD_SEC_CORE=y -CONFIG_MFD_HI655X_PMIC=y -CONFIG_REGULATOR=y +CONFIG_RENESAS_WDT=y +CONFIG_BCM2835_WDT=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_EXYNOS_LPASS=m +CONFIG_MFD_HI655X_PMIC=y +CONFIG_MFD_MAX77620=y +CONFIG_MFD_SPMI_PMIC=y +CONFIG_MFD_RK808=y +CONFIG_MFD_SEC_CORE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI655X=y CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_PWM=y -CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_S2MPS11=y @@ -345,13 +337,12 @@ CONFIG_DRM_EXYNOS_DSI=y CONFIG_DRM_EXYNOS_HDMI=y CONFIG_DRM_EXYNOS_MIC=y CONFIG_DRM_RCAR_DU=m -CONFIG_DRM_RCAR_HDMI=y CONFIG_DRM_RCAR_LVDS=y CONFIG_DRM_RCAR_VSP=y CONFIG_DRM_TEGRA=m -CONFIG_DRM_VC4=m CONFIG_DRM_PANEL_SIMPLE=m CONFIG_DRM_I2C_ADV7511=m +CONFIG_DRM_VC4=m CONFIG_DRM_HISI_KIRIN=m CONFIG_DRM_MESON=m CONFIG_FB=y @@ -366,26 +357,24 @@ CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_BCM2835_SOC_I2S=m -CONFIG_SND_SOC_RCAR=y CONFIG_SND_SOC_SAMSUNG=y +CONFIG_SND_SOC_RCAR=y CONFIG_SND_SOC_AK4613=y CONFIG_USB=y CONFIG_USB_OTG=y CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_PLATFORM=y -CONFIG_USB_XHCI_RCAR=y -CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_XHCI_TEGRA=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MSM=y +CONFIG_USB_EHCI_EXYNOS=y CONFIG_USB_EHCI_HCD_PLATFORM=y -CONFIG_USB_OHCI_EXYNOS=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_RENESAS_USBHS=m CONFIG_USB_STORAGE=y -CONFIG_USB_DWC2=y CONFIG_USB_DWC3=y +CONFIG_USB_DWC2=y CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y @@ -398,7 +387,6 @@ CONFIG_USB_RENESAS_USBHS_UDC=m CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=32 CONFIG_MMC_ARMMMCI=y -CONFIG_MMC_MESON_GX=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ACPI=y CONFIG_MMC_SDHCI_PLTFM=y @@ -406,6 +394,7 @@ CONFIG_MMC_SDHCI_OF_ARASAN=y CONFIG_MMC_SDHCI_OF_ESDHC=y CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_MMC_MESON_GX=y CONFIG_MMC_SDHCI_MSM=y CONFIG_MMC_SPI=y CONFIG_MMC_SDHI=y @@ -414,32 +403,31 @@ CONFIG_MMC_DW_EXYNOS=y CONFIG_MMC_DW_K3=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SUNXI=y -CONFIG_MMC_SDHCI_XENON=y CONFIG_MMC_BCM2835=y +CONFIG_MMC_SDHCI_XENON=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_PWM=y CONFIG_LEDS_SYSCON=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_CPU=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_DS3232=y CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_S3C=y CONFIG_RTC_DRV_PL031=y CONFIG_RTC_DRV_SUN6I=y -CONFIG_RTC_DRV_RK808=m CONFIG_RTC_DRV_TEGRA=y CONFIG_RTC_DRV_XGENE=y -CONFIG_RTC_DRV_S3C=y CONFIG_DMADEVICES=y +CONFIG_DMA_BCM2835=m CONFIG_MV_XOR_V2=y CONFIG_PL330_DMA=y -CONFIG_DMA_BCM2835=m CONFIG_TEGRA20_APB_DMA=y CONFIG_QCOM_BAM_DMA=y CONFIG_QCOM_HIDMA_MGMT=y @@ -452,18 +440,17 @@ CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_MMIO=y CONFIG_XEN_GNTDEV=y CONFIG_XEN_GRANT_DEV_ALLOC=y +CONFIG_COMMON_CLK_RK808=y CONFIG_COMMON_CLK_SCPI=y CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_S2MPS11=y -CONFIG_COMMON_CLK_PWM=y -CONFIG_COMMON_CLK_RK808=y CONFIG_CLK_QORIQ=y +CONFIG_COMMON_CLK_PWM=y CONFIG_COMMON_CLK_QCOM=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y CONFIG_HWSPINLOCK_QCOM=y -CONFIG_MAILBOX=y CONFIG_ARM_MHU=y CONFIG_PLATFORM_MHU=y CONFIG_BCM2835_MBOX=y @@ -472,32 +459,29 @@ CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y CONFIG_RASPBERRYPI_POWER=y CONFIG_QCOM_SMEM=y -CONFIG_QCOM_SMD=y -CONFIG_QCOM_SMD_RPM=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_TEGRA_210_SOC=y CONFIG_ARCH_TEGRA_186_SOC=y CONFIG_EXTCON_USB_GPIO=y +CONFIG_IIO=y +CONFIG_EXYNOS_ADC=y CONFIG_PWM=y CONFIG_PWM_BCM2835=m -CONFIG_PWM_ROCKCHIP=y -CONFIG_PWM_TEGRA=m CONFIG_PWM_MESON=m -CONFIG_COMMON_RESET_HI6220=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_PWM_SAMSUNG=y +CONFIG_PWM_TEGRA=m CONFIG_PHY_RCAR_GEN3_USB2=y CONFIG_PHY_HI6220_USB=y +CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_ROCKCHIP_INNO_USB2=y CONFIG_PHY_ROCKCHIP_EMMC=y -CONFIG_PHY_SUN4I_USB=y CONFIG_PHY_XGENE=y CONFIG_PHY_TEGRA_XUSB=y CONFIG_ARM_SCPI_PROTOCOL=y -CONFIG_ACPI=y -CONFIG_IIO=y -CONFIG_EXYNOS_ADC=y -CONFIG_PWM_SAMSUNG=y CONFIG_RASPBERRYPI_FIRMWARE=y +CONFIG_ACPI=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS_POSIX_ACL=y @@ -511,7 +495,6 @@ CONFIG_FUSE_FS=m CONFIG_CUSE=m CONFIG_OVERLAY_FS=m CONFIG_VFAT_FS=y -CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_CONFIGFS_FS=y CONFIG_EFIVAR_FS=y @@ -539,11 +522,9 @@ CONFIG_MEMTEST=y CONFIG_SECURITY=y CONFIG_CRYPTO_ECHAINIV=y CONFIG_CRYPTO_ANSI_CPRNG=y -CONFIG_CRYPTO_DEV_SAFEXCEL=m CONFIG_ARM64_CRYPTO=y CONFIG_CRYPTO_SHA1_ARM64_CE=y CONFIG_CRYPTO_SHA2_ARM64_CE=y CONFIG_CRYPTO_GHASH_ARM64_CE=y CONFIG_CRYPTO_AES_ARM64_CE_CCM=y CONFIG_CRYPTO_AES_ARM64_CE_BLK=y -# CONFIG_CRYPTO_AES_ARM64_NEON_BLK is not set From f4e506c5a3a026a28c99ca2cbc1c79aeca1a1b68 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 17 May 2017 16:52:30 -0500 Subject: [PATCH 26/29] arm64: defconfig: enable options needed for QCom DB410c board Enable Qualcomm drivers needed to boot Dragonboard 410c with HDMI. This enables support for clocks, regulators, and USB PHY. Cc: Bjorn Andersson Cc: John Stultz Signed-off-by: Rob Herring [Olof: Turned off _RPM configs per follow-up email] Signed-off-by: Olof Johansson --- arch/arm64/configs/defconfig | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index d916fc316698..65cdd878cfbd 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -311,6 +311,7 @@ CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_HI655X=y CONFIG_REGULATOR_MAX77620=y CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_QCOM_SMD_RPM=y CONFIG_REGULATOR_QCOM_SPMI=y CONFIG_REGULATOR_RK808=y CONFIG_REGULATOR_S2MPS11=y @@ -381,6 +382,7 @@ CONFIG_USB_CHIPIDEA_HOST=y CONFIG_USB_ISP1760=y CONFIG_USB_HSIC_USB3503=y CONFIG_USB_MSM_OTG=y +CONFIG_USB_QCOM_8X16_PHY=y CONFIG_USB_ULPI=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=m @@ -447,6 +449,7 @@ CONFIG_COMMON_CLK_S2MPS11=y CONFIG_CLK_QORIQ=y CONFIG_COMMON_CLK_PWM=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y @@ -457,8 +460,12 @@ CONFIG_BCM2835_MBOX=y CONFIG_HI6220_MBOX=y CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y +CONFIG_RPMSG_QCOM_SMD=y CONFIG_RASPBERRYPI_POWER=y CONFIG_QCOM_SMEM=y +CONFIG_QCOM_SMD_RPM=y +CONFIG_QCOM_SMP2P=y +CONFIG_QCOM_SMSM=y CONFIG_ROCKCHIP_PM_DOMAINS=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_TEGRA_210_SOC=y From 0527873b29b077fc8e656acd63e1866b429fef55 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 May 2017 13:50:16 +0200 Subject: [PATCH 27/29] ARM: remove duplicate 'const' annotations' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit gcc-7 warns about some declarations that are more 'const' than necessary: arch/arm/mach-at91/pm.c:338:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const ramc_ids[] __initconst = { arch/arm/mach-bcm/bcm_kona_smc.c:36:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const bcm_kona_smc_ids[] __initconst = { arch/arm/mach-spear/time.c:207:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const timer_of_match[] __initconst = { arch/arm/mach-omap2/prm_common.c:714:34: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = { arch/arm/mach-omap2/vc.c:562:35: error: duplicate 'const' declaration specifier [-Werror=duplicate-decl-specifier] static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = { The ones in arch/arm were apparently all introduced accidentally by one commit that correctly marked a lot of variables as __initconst. Fixes: 19c233b79d1a ("ARM: appropriate __init annotation for const data") Acked-by: Alexandre Belloni Acked-by: Tony Lindgren Acked-by: Nicolas Pitre Acked-by: Florian Fainelli Acked-by: Viresh Kumar Acked-by: Krzysztof Hałasa Signed-off-by: Arnd Bergmann --- arch/arm/mach-at91/pm.c | 2 +- arch/arm/mach-bcm/bcm_kona_smc.c | 2 +- arch/arm/mach-cns3xxx/core.c | 2 +- arch/arm/mach-omap2/prm_common.c | 2 +- arch/arm/mach-omap2/vc.c | 2 +- arch/arm/mach-spear/time.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 2cd27c830ab6..283e79ab587d 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -335,7 +335,7 @@ static const struct ramc_info ramc_infos[] __initconst = { { .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR}, }; -static const struct of_device_id const ramc_ids[] __initconst = { +static const struct of_device_id ramc_ids[] __initconst = { { .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] }, { .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] }, { .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] }, diff --git a/arch/arm/mach-bcm/bcm_kona_smc.c b/arch/arm/mach-bcm/bcm_kona_smc.c index cf3f8658f0e5..a55a7ecf146a 100644 --- a/arch/arm/mach-bcm/bcm_kona_smc.c +++ b/arch/arm/mach-bcm/bcm_kona_smc.c @@ -33,7 +33,7 @@ struct bcm_kona_smc_data { unsigned result; }; -static const struct of_device_id const bcm_kona_smc_ids[] __initconst = { +static const struct of_device_id bcm_kona_smc_ids[] __initconst = { {.compatible = "brcm,kona-smc"}, {.compatible = "bcm,kona-smc"}, /* deprecated name */ {}, diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index 03da3813f1ab..7d5a44a06648 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -346,7 +346,7 @@ static struct usb_ohci_pdata cns3xxx_usb_ohci_pdata = { .power_off = csn3xxx_usb_power_off, }; -static const struct of_dev_auxdata const cns3xxx_auxdata[] __initconst = { +static const struct of_dev_auxdata cns3xxx_auxdata[] __initconst = { { "intel,usb-ehci", CNS3XXX_USB_BASE, "ehci-platform", &cns3xxx_usb_ehci_pdata }, { "intel,usb-ohci", CNS3XXX_USB_OHCI_BASE, "ohci-platform", &cns3xxx_usb_ohci_pdata }, { "cavium,cns3420-ahci", CNS3XXX_SATA2_BASE, "ahci", NULL }, diff --git a/arch/arm/mach-omap2/prm_common.c b/arch/arm/mach-omap2/prm_common.c index 2b138b65129a..dc11841ca334 100644 --- a/arch/arm/mach-omap2/prm_common.c +++ b/arch/arm/mach-omap2/prm_common.c @@ -711,7 +711,7 @@ static struct omap_prcm_init_data scrm_data __initdata = { }; #endif -static const struct of_device_id const omap_prcm_dt_match_table[] __initconst = { +static const struct of_device_id omap_prcm_dt_match_table[] __initconst = { #ifdef CONFIG_SOC_AM33XX { .compatible = "ti,am3-prcm", .data = &am3_prm_data }, #endif diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 2028167fff31..d76b1e5eb8ba 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -559,7 +559,7 @@ struct i2c_init_data { u8 hsscll_12; }; -static const struct i2c_init_data const omap4_i2c_timing_data[] __initconst = { +static const struct i2c_init_data omap4_i2c_timing_data[] __initconst = { { .load = 50, .loadbits = 0x3, diff --git a/arch/arm/mach-spear/time.c b/arch/arm/mach-spear/time.c index 4878ba90026d..289e036c9c30 100644 --- a/arch/arm/mach-spear/time.c +++ b/arch/arm/mach-spear/time.c @@ -204,7 +204,7 @@ static void __init spear_clockevent_init(int irq) setup_irq(irq, &spear_timer_irq); } -static const struct of_device_id const timer_of_match[] __initconst = { +static const struct of_device_id timer_of_match[] __initconst = { { .compatible = "st,spear-timer", }, { }, }; From 76cefef8e838304a71725a0b5007c375619d78fb Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 11 Jan 2017 12:53:05 +0100 Subject: [PATCH 28/29] firmware: ti_sci: fix strncat length check gcc-7 notices that the length we pass to strncat is wrong: drivers/firmware/ti_sci.c: In function 'ti_sci_probe': drivers/firmware/ti_sci.c:204:32: error: specified bound 50 equals the size of the destination [-Werror=stringop-overflow=] Instead of the total length, we must pass the length of the remaining space here. Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Cc: stable@vger.kernel.org Acked-by: Nishanth Menon Acked-by: Santosh Shilimkar Signed-off-by: Arnd Bergmann --- drivers/firmware/ti_sci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index 874ff32db366..00cfed3c3e1a 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -202,7 +202,8 @@ static int ti_sci_debugfs_create(struct platform_device *pdev, info->debug_buffer[info->debug_region_size] = 0; info->d = debugfs_create_file(strncat(debug_name, dev_name(dev), - sizeof(debug_name)), + sizeof(debug_name) - + sizeof("ti_sci_debug@")), 0444, NULL, info, &ti_sci_debug_fops); if (IS_ERR(info->d)) return PTR_ERR(info->d); From 6bf1c2d26716dcd483699cc62474e49d164c5563 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 19 May 2017 14:12:00 +0200 Subject: [PATCH 29/29] arm64: dts: rockchip: fix include reference The way we handle include paths for DT has changed a bit, which broke a file that had an unconventional way to reference a common header file: arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts:47:10: fatal error: include/dt-bindings/input/linux-event-codes.h: No such file or directory This removes the leading "include/" from the path name, which fixes it. Fixes: d5d332d3f7e8 ("devicetree: Move include prefixes from arch to separate directory") Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts index 658bb9dc9dfd..7bd31066399b 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -44,7 +44,7 @@ /dts-v1/; #include "rk3399-gru.dtsi" -#include +#include /* * Kevin-specific things