sky2: rename BMU register
This register is more of a test and control register on Yukon2. So rename it to Q_TEST and give some bit definitions. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
parent
fc99fe0618
commit
f449c7c106
|
@ -1140,7 +1140,7 @@ static int sky2_rx_start(struct sky2_port *sky2)
|
|||
if (hw->chip_id == CHIP_ID_YUKON_EC_U &&
|
||||
(hw->chip_rev == CHIP_REV_YU_EC_U_A1
|
||||
|| hw->chip_rev == CHIP_REV_YU_EC_U_B0))
|
||||
sky2_write32(hw, Q_ADDR(rxq, Q_F), F_M_RX_RAM_DIS);
|
||||
sky2_write32(hw, Q_ADDR(rxq, Q_TEST), F_M_RX_RAM_DIS);
|
||||
|
||||
sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1);
|
||||
|
||||
|
|
|
@ -592,23 +592,15 @@ enum {
|
|||
enum {
|
||||
B8_Q_REGS = 0x0400, /* base of Queue registers */
|
||||
Q_D = 0x00, /* 8*32 bit Current Descriptor */
|
||||
Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */
|
||||
Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */
|
||||
Q_VLAN = 0x20, /* 16 bit Current VLAN Tag */
|
||||
Q_DONE = 0x24, /* 16 bit Done Index */
|
||||
Q_AC_L = 0x28, /* 32 bit Current Address Counter Low dWord */
|
||||
Q_AC_H = 0x2c, /* 32 bit Current Address Counter High dWord */
|
||||
Q_BC = 0x30, /* 32 bit Current Byte Counter */
|
||||
Q_CSR = 0x34, /* 32 bit BMU Control/Status Register */
|
||||
Q_F = 0x38, /* 32 bit Flag Register */
|
||||
Q_T1 = 0x3c, /* 32 bit Test Register 1 */
|
||||
Q_T1_TR = 0x3c, /* 8 bit Test Register 1 Transfer SM */
|
||||
Q_T1_WR = 0x3d, /* 8 bit Test Register 1 Write Descriptor SM */
|
||||
Q_T1_RD = 0x3e, /* 8 bit Test Register 1 Read Descriptor SM */
|
||||
Q_T1_SV = 0x3f, /* 8 bit Test Register 1 Supervisor SM */
|
||||
Q_T2 = 0x40, /* 32 bit Test Register 2 */
|
||||
Q_T3 = 0x44, /* 32 bit Test Register 3 */
|
||||
Q_TEST = 0x38, /* 32 bit Test/Control Register */
|
||||
|
||||
/* Yukon-2 */
|
||||
Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */
|
||||
Q_WM = 0x40, /* 16 bit FIFO Watermark */
|
||||
Q_AL = 0x42, /* 8 bit FIFO Alignment */
|
||||
Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */
|
||||
|
@ -622,15 +614,16 @@ enum {
|
|||
};
|
||||
#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs))
|
||||
|
||||
/* Q_F 32 bit Flag Register */
|
||||
/* Q_TEST 32 bit Test Register */
|
||||
enum {
|
||||
F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */
|
||||
F_EMPTY = 1<<27, /* Tx FIFO: empty flag */
|
||||
F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */
|
||||
F_WM_REACHED = 1<<25, /* Watermark reached */
|
||||
/* Transmit */
|
||||
F_TX_CHK_AUTO_OFF = 1<<31, /* Tx checksum auto calc off (Yukon EX) */
|
||||
F_TX_CHK_AUTO_ON = 1<<30, /* Tx checksum auto calc off (Yukon EX) */
|
||||
|
||||
/* Receive */
|
||||
F_M_RX_RAM_DIS = 1<<24, /* MAC Rx RAM Read Port disable */
|
||||
F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */
|
||||
F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */
|
||||
|
||||
/* Hardware testbits not used */
|
||||
};
|
||||
|
||||
/* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
|
||||
|
|
Loading…
Reference in New Issue