can: mcp251x: allow to read two registers in one spi transfer
This patch bases on work done earlier by David Jander. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: David Jander <david@protonic.nl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Wolfgang Grandegger <wg@grandegger.com>
This commit is contained in:
parent
711e4d6ecc
commit
f3a3ed3115
|
@ -319,6 +319,20 @@ static u8 mcp251x_read_reg(struct spi_device *spi, uint8_t reg)
|
|||
return val;
|
||||
}
|
||||
|
||||
static void mcp251x_read_2regs(struct spi_device *spi, uint8_t reg,
|
||||
uint8_t *v1, uint8_t *v2)
|
||||
{
|
||||
struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
|
||||
|
||||
priv->spi_tx_buf[0] = INSTRUCTION_READ;
|
||||
priv->spi_tx_buf[1] = reg;
|
||||
|
||||
mcp251x_spi_trans(spi, 4);
|
||||
|
||||
*v1 = priv->spi_rx_buf[2];
|
||||
*v2 = priv->spi_rx_buf[3];
|
||||
}
|
||||
|
||||
static void mcp251x_write_reg(struct spi_device *spi, u8 reg, uint8_t val)
|
||||
{
|
||||
struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev);
|
||||
|
@ -754,10 +768,11 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
|
|||
mutex_lock(&priv->mcp_lock);
|
||||
while (!priv->force_quit) {
|
||||
enum can_state new_state;
|
||||
u8 intf = mcp251x_read_reg(spi, CANINTF);
|
||||
u8 eflag;
|
||||
u8 intf, eflag;
|
||||
int can_id = 0, data1 = 0;
|
||||
|
||||
mcp251x_read_2regs(spi, CANINTF, &intf, &eflag);
|
||||
|
||||
if (intf & CANINTF_RX0IF) {
|
||||
mcp251x_hw_rx(spi, 0);
|
||||
/* Free one buffer ASAP */
|
||||
|
@ -770,7 +785,6 @@ static irqreturn_t mcp251x_can_ist(int irq, void *dev_id)
|
|||
|
||||
mcp251x_write_bits(spi, CANINTF, intf, 0x00);
|
||||
|
||||
eflag = mcp251x_read_reg(spi, EFLG);
|
||||
mcp251x_write_reg(spi, EFLG, 0x00);
|
||||
|
||||
/* Update can state */
|
||||
|
|
Loading…
Reference in New Issue