mtd: spi-nor: parse Serial Flash Discoverable Parameters (SFDP) tables
This patch adds support to the JESD216 rev B standard and parses the SFDP tables to dynamically initialize the 'struct spi_nor_flash_parameter'. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@microchip.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
This commit is contained in:
Cyrille Pitchen
Cyrille Pitchen
parent
5771a8c088
commit
f384b352cb
|
|
@ -17,6 +17,7 @@
|
|||
#include <linux/mutex.h>
|
||||
#include <linux/math64.h>
|
||||
#include <linux/sizes.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
|
@ -86,6 +87,7 @@ struct flash_info {
|
|||
* to support memory size above 128Mib.
|
||||
*/
|
||||
#define NO_CHIP_ERASE BIT(12) /* Chip does not support chip erase */
|
||||
#define SPI_NOR_SKIP_SFDP BIT(13) /* Skip parsing of SFDP tables */
|
||||
};
|
||||
|
||||
#define JEDEC_MFR(info) ((info)->id[0])
|
||||
|
|
@ -1380,6 +1382,16 @@ write_err:
|
|||
return ret;
|
||||
}
|
||||
|
||||
/**
|
||||
* macronix_quad_enable() - set QE bit in Status Register.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
*
|
||||
* Set the Quad Enable (QE) bit in the Status Register.
|
||||
*
|
||||
* bit 6 of the Status Register is the QE bit for Macronix like QSPI memories.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int macronix_quad_enable(struct spi_nor *nor)
|
||||
{
|
||||
int ret, val;
|
||||
|
|
@ -1413,22 +1425,13 @@ static int macronix_quad_enable(struct spi_nor *nor)
|
|||
* second byte will be written to the configuration register.
|
||||
* Return negative if error occurred.
|
||||
*/
|
||||
static int write_sr_cr(struct spi_nor *nor, u16 val)
|
||||
{
|
||||
nor->cmd_buf[0] = val & 0xff;
|
||||
nor->cmd_buf[1] = (val >> 8);
|
||||
|
||||
return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 2);
|
||||
}
|
||||
|
||||
static int spansion_quad_enable(struct spi_nor *nor)
|
||||
static int write_sr_cr(struct spi_nor *nor, u8 *sr_cr)
|
||||
{
|
||||
int ret;
|
||||
int quad_en = CR_QUAD_EN_SPAN << 8;
|
||||
|
||||
write_enable(nor);
|
||||
|
||||
ret = write_sr_cr(nor, quad_en);
|
||||
ret = nor->write_reg(nor, SPINOR_OP_WRSR, sr_cr, 2);
|
||||
if (ret < 0) {
|
||||
dev_err(nor->dev,
|
||||
"error while writing configuration register\n");
|
||||
|
|
@ -1442,6 +1445,41 @@ static int spansion_quad_enable(struct spi_nor *nor)
|
|||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* spansion_quad_enable() - set QE bit in Configuraiton Register.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
*
|
||||
* Set the Quad Enable (QE) bit in the Configuration Register.
|
||||
* This function is kept for legacy purpose because it has been used for a
|
||||
* long time without anybody complaining but it should be considered as
|
||||
* deprecated and maybe buggy.
|
||||
* First, this function doesn't care about the previous values of the Status
|
||||
* and Configuration Registers when it sets the QE bit (bit 1) in the
|
||||
* Configuration Register: all other bits are cleared, which may have unwanted
|
||||
* side effects like removing some block protections.
|
||||
* Secondly, it uses the Read Configuration Register (35h) instruction though
|
||||
* some very old and few memories don't support this instruction. If a pull-up
|
||||
* resistor is present on the MISO/IO1 line, we might still be able to pass the
|
||||
* "read back" test because the QSPI memory doesn't recognize the command,
|
||||
* so leaves the MISO/IO1 line state unchanged, hence read_cr() returns 0xFF.
|
||||
*
|
||||
* bit 1 of the Configuration Register is the QE bit for Spansion like QSPI
|
||||
* memories.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int spansion_quad_enable(struct spi_nor *nor)
|
||||
{
|
||||
u8 sr_cr[2] = {0, CR_QUAD_EN_SPAN};
|
||||
int ret;
|
||||
|
||||
ret = write_sr_cr(nor, sr_cr);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* read back and check it */
|
||||
ret = read_cr(nor);
|
||||
if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
|
||||
|
|
@ -1452,6 +1490,140 @@ static int spansion_quad_enable(struct spi_nor *nor)
|
|||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* spansion_no_read_cr_quad_enable() - set QE bit in Configuration Register.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
*
|
||||
* Set the Quad Enable (QE) bit in the Configuration Register.
|
||||
* This function should be used with QSPI memories not supporting the Read
|
||||
* Configuration Register (35h) instruction.
|
||||
*
|
||||
* bit 1 of the Configuration Register is the QE bit for Spansion like QSPI
|
||||
* memories.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int spansion_no_read_cr_quad_enable(struct spi_nor *nor)
|
||||
{
|
||||
u8 sr_cr[2];
|
||||
int ret;
|
||||
|
||||
/* Keep the current value of the Status Register. */
|
||||
ret = read_sr(nor);
|
||||
if (ret < 0) {
|
||||
dev_err(nor->dev, "error while reading status register\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
sr_cr[0] = ret;
|
||||
sr_cr[1] = CR_QUAD_EN_SPAN;
|
||||
|
||||
return write_sr_cr(nor, sr_cr);
|
||||
}
|
||||
|
||||
/**
|
||||
* spansion_read_cr_quad_enable() - set QE bit in Configuration Register.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
*
|
||||
* Set the Quad Enable (QE) bit in the Configuration Register.
|
||||
* This function should be used with QSPI memories supporting the Read
|
||||
* Configuration Register (35h) instruction.
|
||||
*
|
||||
* bit 1 of the Configuration Register is the QE bit for Spansion like QSPI
|
||||
* memories.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int spansion_read_cr_quad_enable(struct spi_nor *nor)
|
||||
{
|
||||
struct device *dev = nor->dev;
|
||||
u8 sr_cr[2];
|
||||
int ret;
|
||||
|
||||
/* Check current Quad Enable bit value. */
|
||||
ret = read_cr(nor);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "error while reading configuration register\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (ret & CR_QUAD_EN_SPAN)
|
||||
return 0;
|
||||
|
||||
sr_cr[1] = ret | CR_QUAD_EN_SPAN;
|
||||
|
||||
/* Keep the current value of the Status Register. */
|
||||
ret = read_sr(nor);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "error while reading status register\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
sr_cr[0] = ret;
|
||||
|
||||
ret = write_sr_cr(nor, sr_cr);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Read back and check it. */
|
||||
ret = read_cr(nor);
|
||||
if (!(ret > 0 && (ret & CR_QUAD_EN_SPAN))) {
|
||||
dev_err(nor->dev, "Spansion Quad bit not set\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* sr2_bit7_quad_enable() - set QE bit in Status Register 2.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
*
|
||||
* Set the Quad Enable (QE) bit in the Status Register 2.
|
||||
*
|
||||
* This is one of the procedures to set the QE bit described in the SFDP
|
||||
* (JESD216 rev B) specification but no manufacturer using this procedure has
|
||||
* been identified yet, hence the name of the function.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int sr2_bit7_quad_enable(struct spi_nor *nor)
|
||||
{
|
||||
u8 sr2;
|
||||
int ret;
|
||||
|
||||
/* Check current Quad Enable bit value. */
|
||||
ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1);
|
||||
if (ret)
|
||||
return ret;
|
||||
if (sr2 & SR2_QUAD_EN_BIT7)
|
||||
return 0;
|
||||
|
||||
/* Update the Quad Enable bit. */
|
||||
sr2 |= SR2_QUAD_EN_BIT7;
|
||||
|
||||
write_enable(nor);
|
||||
|
||||
ret = nor->write_reg(nor, SPINOR_OP_WRSR2, &sr2, 1);
|
||||
if (ret < 0) {
|
||||
dev_err(nor->dev, "error while writing status register 2\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
ret = spi_nor_wait_till_ready(nor);
|
||||
if (ret < 0) {
|
||||
dev_err(nor->dev, "timeout while writing status register 2\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Read back and check it. */
|
||||
ret = nor->read_reg(nor, SPINOR_OP_RDSR2, &sr2, 1);
|
||||
if (!(ret > 0 && (sr2 & SR2_QUAD_EN_BIT7))) {
|
||||
dev_err(nor->dev, "SR2 Quad bit not set\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int spi_nor_check(struct spi_nor *nor)
|
||||
{
|
||||
if (!nor->dev || !nor->read || !nor->write ||
|
||||
|
|
@ -1591,6 +1763,560 @@ spi_nor_set_pp_settings(struct spi_nor_pp_command *pp,
|
|||
pp->proto = proto;
|
||||
}
|
||||
|
||||
/*
|
||||
* Serial Flash Discoverable Parameters (SFDP) parsing.
|
||||
*/
|
||||
|
||||
/**
|
||||
* spi_nor_read_sfdp() - read Serial Flash Discoverable Parameters.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
* @addr: offset in the SFDP area to start reading data from
|
||||
* @len: number of bytes to read
|
||||
* @buf: buffer where the SFDP data are copied into
|
||||
*
|
||||
* Whatever the actual numbers of bytes for address and dummy cycles are
|
||||
* for (Fast) Read commands, the Read SFDP (5Ah) instruction is always
|
||||
* followed by a 3-byte address and 8 dummy clock cycles.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int spi_nor_read_sfdp(struct spi_nor *nor, u32 addr,
|
||||
size_t len, void *buf)
|
||||
{
|
||||
u8 addr_width, read_opcode, read_dummy;
|
||||
int ret;
|
||||
|
||||
read_opcode = nor->read_opcode;
|
||||
addr_width = nor->addr_width;
|
||||
read_dummy = nor->read_dummy;
|
||||
|
||||
nor->read_opcode = SPINOR_OP_RDSFDP;
|
||||
nor->addr_width = 3;
|
||||
nor->read_dummy = 8;
|
||||
|
||||
while (len) {
|
||||
ret = nor->read(nor, addr, len, (u8 *)buf);
|
||||
if (!ret || ret > len) {
|
||||
ret = -EIO;
|
||||
goto read_err;
|
||||
}
|
||||
if (ret < 0)
|
||||
goto read_err;
|
||||
|
||||
buf += ret;
|
||||
addr += ret;
|
||||
len -= ret;
|
||||
}
|
||||
ret = 0;
|
||||
|
||||
read_err:
|
||||
nor->read_opcode = read_opcode;
|
||||
nor->addr_width = addr_width;
|
||||
nor->read_dummy = read_dummy;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
struct sfdp_parameter_header {
|
||||
u8 id_lsb;
|
||||
u8 minor;
|
||||
u8 major;
|
||||
u8 length; /* in double words */
|
||||
u8 parameter_table_pointer[3]; /* byte address */
|
||||
u8 id_msb;
|
||||
};
|
||||
|
||||
#define SFDP_PARAM_HEADER_ID(p) (((p)->id_msb << 8) | (p)->id_lsb)
|
||||
#define SFDP_PARAM_HEADER_PTP(p) \
|
||||
(((p)->parameter_table_pointer[2] << 16) | \
|
||||
((p)->parameter_table_pointer[1] << 8) | \
|
||||
((p)->parameter_table_pointer[0] << 0))
|
||||
|
||||
#define SFDP_BFPT_ID 0xff00 /* Basic Flash Parameter Table */
|
||||
#define SFDP_SECTOR_MAP_ID 0xff81 /* Sector Map Table */
|
||||
|
||||
#define SFDP_SIGNATURE 0x50444653U
|
||||
#define SFDP_JESD216_MAJOR 1
|
||||
#define SFDP_JESD216_MINOR 0
|
||||
#define SFDP_JESD216A_MINOR 5
|
||||
#define SFDP_JESD216B_MINOR 6
|
||||
|
||||
struct sfdp_header {
|
||||
u32 signature; /* Ox50444653U <=> "SFDP" */
|
||||
u8 minor;
|
||||
u8 major;
|
||||
u8 nph; /* 0-base number of parameter headers */
|
||||
u8 unused;
|
||||
|
||||
/* Basic Flash Parameter Table. */
|
||||
struct sfdp_parameter_header bfpt_header;
|
||||
};
|
||||
|
||||
/* Basic Flash Parameter Table */
|
||||
|
||||
/*
|
||||
* JESD216 rev B defines a Basic Flash Parameter Table of 16 DWORDs.
|
||||
* They are indexed from 1 but C arrays are indexed from 0.
|
||||
*/
|
||||
#define BFPT_DWORD(i) ((i) - 1)
|
||||
#define BFPT_DWORD_MAX 16
|
||||
|
||||
/* The first version of JESB216 defined only 9 DWORDs. */
|
||||
#define BFPT_DWORD_MAX_JESD216 9
|
||||
|
||||
/* 1st DWORD. */
|
||||
#define BFPT_DWORD1_FAST_READ_1_1_2 BIT(16)
|
||||
#define BFPT_DWORD1_ADDRESS_BYTES_MASK GENMASK(18, 17)
|
||||
#define BFPT_DWORD1_ADDRESS_BYTES_3_ONLY (0x0UL << 17)
|
||||
#define BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 (0x1UL << 17)
|
||||
#define BFPT_DWORD1_ADDRESS_BYTES_4_ONLY (0x2UL << 17)
|
||||
#define BFPT_DWORD1_DTR BIT(19)
|
||||
#define BFPT_DWORD1_FAST_READ_1_2_2 BIT(20)
|
||||
#define BFPT_DWORD1_FAST_READ_1_4_4 BIT(21)
|
||||
#define BFPT_DWORD1_FAST_READ_1_1_4 BIT(22)
|
||||
|
||||
/* 5th DWORD. */
|
||||
#define BFPT_DWORD5_FAST_READ_2_2_2 BIT(0)
|
||||
#define BFPT_DWORD5_FAST_READ_4_4_4 BIT(4)
|
||||
|
||||
/* 11th DWORD. */
|
||||
#define BFPT_DWORD11_PAGE_SIZE_SHIFT 4
|
||||
#define BFPT_DWORD11_PAGE_SIZE_MASK GENMASK(7, 4)
|
||||
|
||||
/* 15th DWORD. */
|
||||
|
||||
/*
|
||||
* (from JESD216 rev B)
|
||||
* Quad Enable Requirements (QER):
|
||||
* - 000b: Device does not have a QE bit. Device detects 1-1-4 and 1-4-4
|
||||
* reads based on instruction. DQ3/HOLD# functions are hold during
|
||||
* instruction phase.
|
||||
* - 001b: QE is bit 1 of status register 2. It is set via Write Status with
|
||||
* two data bytes where bit 1 of the second byte is one.
|
||||
* [...]
|
||||
* Writing only one byte to the status register has the side-effect of
|
||||
* clearing status register 2, including the QE bit. The 100b code is
|
||||
* used if writing one byte to the status register does not modify
|
||||
* status register 2.
|
||||
* - 010b: QE is bit 6 of status register 1. It is set via Write Status with
|
||||
* one data byte where bit 6 is one.
|
||||
* [...]
|
||||
* - 011b: QE is bit 7 of status register 2. It is set via Write status
|
||||
* register 2 instruction 3Eh with one data byte where bit 7 is one.
|
||||
* [...]
|
||||
* The status register 2 is read using instruction 3Fh.
|
||||
* - 100b: QE is bit 1 of status register 2. It is set via Write Status with
|
||||
* two data bytes where bit 1 of the second byte is one.
|
||||
* [...]
|
||||
* In contrast to the 001b code, writing one byte to the status
|
||||
* register does not modify status register 2.
|
||||
* - 101b: QE is bit 1 of status register 2. Status register 1 is read using
|
||||
* Read Status instruction 05h. Status register2 is read using
|
||||
* instruction 35h. QE is set via Writ Status instruction 01h with
|
||||
* two data bytes where bit 1 of the second byte is one.
|
||||
* [...]
|
||||
*/
|
||||
#define BFPT_DWORD15_QER_MASK GENMASK(22, 20)
|
||||
#define BFPT_DWORD15_QER_NONE (0x0UL << 20) /* Micron */
|
||||
#define BFPT_DWORD15_QER_SR2_BIT1_BUGGY (0x1UL << 20)
|
||||
#define BFPT_DWORD15_QER_SR1_BIT6 (0x2UL << 20) /* Macronix */
|
||||
#define BFPT_DWORD15_QER_SR2_BIT7 (0x3UL << 20)
|
||||
#define BFPT_DWORD15_QER_SR2_BIT1_NO_RD (0x4UL << 20)
|
||||
#define BFPT_DWORD15_QER_SR2_BIT1 (0x5UL << 20) /* Spansion */
|
||||
|
||||
struct sfdp_bfpt {
|
||||
u32 dwords[BFPT_DWORD_MAX];
|
||||
};
|
||||
|
||||
/* Fast Read settings. */
|
||||
|
||||
static inline void
|
||||
spi_nor_set_read_settings_from_bfpt(struct spi_nor_read_command *read,
|
||||
u16 half,
|
||||
enum spi_nor_protocol proto)
|
||||
{
|
||||
read->num_mode_clocks = (half >> 5) & 0x07;
|
||||
read->num_wait_states = (half >> 0) & 0x1f;
|
||||
read->opcode = (half >> 8) & 0xff;
|
||||
read->proto = proto;
|
||||
}
|
||||
|
||||
struct sfdp_bfpt_read {
|
||||
/* The Fast Read x-y-z hardware capability in params->hwcaps.mask. */
|
||||
u32 hwcaps;
|
||||
|
||||
/*
|
||||
* The <supported_bit> bit in <supported_dword> BFPT DWORD tells us
|
||||
* whether the Fast Read x-y-z command is supported.
|
||||
*/
|
||||
u32 supported_dword;
|
||||
u32 supported_bit;
|
||||
|
||||
/*
|
||||
* The half-word at offset <setting_shift> in <setting_dword> BFPT DWORD
|
||||
* encodes the op code, the number of mode clocks and the number of wait
|
||||
* states to be used by Fast Read x-y-z command.
|
||||
*/
|
||||
u32 settings_dword;
|
||||
u32 settings_shift;
|
||||
|
||||
/* The SPI protocol for this Fast Read x-y-z command. */
|
||||
enum spi_nor_protocol proto;
|
||||
};
|
||||
|
||||
static const struct sfdp_bfpt_read sfdp_bfpt_reads[] = {
|
||||
/* Fast Read 1-1-2 */
|
||||
{
|
||||
SNOR_HWCAPS_READ_1_1_2,
|
||||
BFPT_DWORD(1), BIT(16), /* Supported bit */
|
||||
BFPT_DWORD(4), 0, /* Settings */
|
||||
SNOR_PROTO_1_1_2,
|
||||
},
|
||||
|
||||
/* Fast Read 1-2-2 */
|
||||
{
|
||||
SNOR_HWCAPS_READ_1_2_2,
|
||||
BFPT_DWORD(1), BIT(20), /* Supported bit */
|
||||
BFPT_DWORD(4), 16, /* Settings */
|
||||
SNOR_PROTO_1_2_2,
|
||||
},
|
||||
|
||||
/* Fast Read 2-2-2 */
|
||||
{
|
||||
SNOR_HWCAPS_READ_2_2_2,
|
||||
BFPT_DWORD(5), BIT(0), /* Supported bit */
|
||||
BFPT_DWORD(6), 16, /* Settings */
|
||||
SNOR_PROTO_2_2_2,
|
||||
},
|
||||
|
||||
/* Fast Read 1-1-4 */
|
||||
{
|
||||
SNOR_HWCAPS_READ_1_1_4,
|
||||
BFPT_DWORD(1), BIT(22), /* Supported bit */
|
||||
BFPT_DWORD(3), 16, /* Settings */
|
||||
SNOR_PROTO_1_1_4,
|
||||
},
|
||||
|
||||
/* Fast Read 1-4-4 */
|
||||
{
|
||||
SNOR_HWCAPS_READ_1_4_4,
|
||||
BFPT_DWORD(1), BIT(21), /* Supported bit */
|
||||
BFPT_DWORD(3), 0, /* Settings */
|
||||
SNOR_PROTO_1_4_4,
|
||||
},
|
||||
|
||||
/* Fast Read 4-4-4 */
|
||||
{
|
||||
SNOR_HWCAPS_READ_4_4_4,
|
||||
BFPT_DWORD(5), BIT(4), /* Supported bit */
|
||||
BFPT_DWORD(7), 16, /* Settings */
|
||||
SNOR_PROTO_4_4_4,
|
||||
},
|
||||
};
|
||||
|
||||
struct sfdp_bfpt_erase {
|
||||
/*
|
||||
* The half-word at offset <shift> in DWORD <dwoard> encodes the
|
||||
* op code and erase sector size to be used by Sector Erase commands.
|
||||
*/
|
||||
u32 dword;
|
||||
u32 shift;
|
||||
};
|
||||
|
||||
static const struct sfdp_bfpt_erase sfdp_bfpt_erases[] = {
|
||||
/* Erase Type 1 in DWORD8 bits[15:0] */
|
||||
{BFPT_DWORD(8), 0},
|
||||
|
||||
/* Erase Type 2 in DWORD8 bits[31:16] */
|
||||
{BFPT_DWORD(8), 16},
|
||||
|
||||
/* Erase Type 3 in DWORD9 bits[15:0] */
|
||||
{BFPT_DWORD(9), 0},
|
||||
|
||||
/* Erase Type 4 in DWORD9 bits[31:16] */
|
||||
{BFPT_DWORD(9), 16},
|
||||
};
|
||||
|
||||
static int spi_nor_hwcaps_read2cmd(u32 hwcaps);
|
||||
|
||||
/**
|
||||
* spi_nor_parse_bfpt() - read and parse the Basic Flash Parameter Table.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
* @bfpt_header: pointer to the 'struct sfdp_parameter_header' describing
|
||||
* the Basic Flash Parameter Table length and version
|
||||
* @params: pointer to the 'struct spi_nor_flash_parameter' to be
|
||||
* filled
|
||||
*
|
||||
* The Basic Flash Parameter Table is the main and only mandatory table as
|
||||
* defined by the SFDP (JESD216) specification.
|
||||
* It provides us with the total size (memory density) of the data array and
|
||||
* the number of address bytes for Fast Read, Page Program and Sector Erase
|
||||
* commands.
|
||||
* For Fast READ commands, it also gives the number of mode clock cycles and
|
||||
* wait states (regrouped in the number of dummy clock cycles) for each
|
||||
* supported instruction op code.
|
||||
* For Page Program, the page size is now available since JESD216 rev A, however
|
||||
* the supported instruction op codes are still not provided.
|
||||
* For Sector Erase commands, this table stores the supported instruction op
|
||||
* codes and the associated sector sizes.
|
||||
* Finally, the Quad Enable Requirements (QER) are also available since JESD216
|
||||
* rev A. The QER bits encode the manufacturer dependent procedure to be
|
||||
* executed to set the Quad Enable (QE) bit in some internal register of the
|
||||
* Quad SPI memory. Indeed the QE bit, when it exists, must be set before
|
||||
* sending any Quad SPI command to the memory. Actually, setting the QE bit
|
||||
* tells the memory to reassign its WP# and HOLD#/RESET# pins to functions IO2
|
||||
* and IO3 hence enabling 4 (Quad) I/O lines.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int spi_nor_parse_bfpt(struct spi_nor *nor,
|
||||
const struct sfdp_parameter_header *bfpt_header,
|
||||
struct spi_nor_flash_parameter *params)
|
||||
{
|
||||
struct mtd_info *mtd = &nor->mtd;
|
||||
struct sfdp_bfpt bfpt;
|
||||
size_t len;
|
||||
int i, cmd, err;
|
||||
u32 addr;
|
||||
u16 half;
|
||||
|
||||
/* JESD216 Basic Flash Parameter Table length is at least 9 DWORDs. */
|
||||
if (bfpt_header->length < BFPT_DWORD_MAX_JESD216)
|
||||
return -EINVAL;
|
||||
|
||||
/* Read the Basic Flash Parameter Table. */
|
||||
len = min_t(size_t, sizeof(bfpt),
|
||||
bfpt_header->length * sizeof(u32));
|
||||
addr = SFDP_PARAM_HEADER_PTP(bfpt_header);
|
||||
memset(&bfpt, 0, sizeof(bfpt));
|
||||
err = spi_nor_read_sfdp(nor, addr, len, &bfpt);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* Fix endianness of the BFPT DWORDs. */
|
||||
for (i = 0; i < BFPT_DWORD_MAX; i++)
|
||||
bfpt.dwords[i] = le32_to_cpu(bfpt.dwords[i]);
|
||||
|
||||
/* Number of address bytes. */
|
||||
switch (bfpt.dwords[BFPT_DWORD(1)] & BFPT_DWORD1_ADDRESS_BYTES_MASK) {
|
||||
case BFPT_DWORD1_ADDRESS_BYTES_3_ONLY:
|
||||
nor->addr_width = 3;
|
||||
break;
|
||||
|
||||
case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
|
||||
nor->addr_width = 4;
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
/* Flash Memory Density (in bits). */
|
||||
params->size = bfpt.dwords[BFPT_DWORD(2)];
|
||||
if (params->size & BIT(31)) {
|
||||
params->size &= ~BIT(31);
|
||||
params->size = 1ULL << params->size;
|
||||
} else {
|
||||
params->size++;
|
||||
}
|
||||
params->size >>= 3; /* Convert to bytes. */
|
||||
|
||||
/* Fast Read settings. */
|
||||
for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_reads); i++) {
|
||||
const struct sfdp_bfpt_read *rd = &sfdp_bfpt_reads[i];
|
||||
struct spi_nor_read_command *read;
|
||||
|
||||
if (!(bfpt.dwords[rd->supported_dword] & rd->supported_bit)) {
|
||||
params->hwcaps.mask &= ~rd->hwcaps;
|
||||
continue;
|
||||
}
|
||||
|
||||
params->hwcaps.mask |= rd->hwcaps;
|
||||
cmd = spi_nor_hwcaps_read2cmd(rd->hwcaps);
|
||||
read = ¶ms->reads[cmd];
|
||||
half = bfpt.dwords[rd->settings_dword] >> rd->settings_shift;
|
||||
spi_nor_set_read_settings_from_bfpt(read, half, rd->proto);
|
||||
}
|
||||
|
||||
/* Sector Erase settings. */
|
||||
for (i = 0; i < ARRAY_SIZE(sfdp_bfpt_erases); i++) {
|
||||
const struct sfdp_bfpt_erase *er = &sfdp_bfpt_erases[i];
|
||||
u32 erasesize;
|
||||
u8 opcode;
|
||||
|
||||
half = bfpt.dwords[er->dword] >> er->shift;
|
||||
erasesize = half & 0xff;
|
||||
|
||||
/* erasesize == 0 means this Erase Type is not supported. */
|
||||
if (!erasesize)
|
||||
continue;
|
||||
|
||||
erasesize = 1U << erasesize;
|
||||
opcode = (half >> 8) & 0xff;
|
||||
#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
|
||||
if (erasesize == SZ_4K) {
|
||||
nor->erase_opcode = opcode;
|
||||
mtd->erasesize = erasesize;
|
||||
break;
|
||||
}
|
||||
#endif
|
||||
if (!mtd->erasesize || mtd->erasesize < erasesize) {
|
||||
nor->erase_opcode = opcode;
|
||||
mtd->erasesize = erasesize;
|
||||
}
|
||||
}
|
||||
|
||||
/* Stop here if not JESD216 rev A or later. */
|
||||
if (bfpt_header->length < BFPT_DWORD_MAX)
|
||||
return 0;
|
||||
|
||||
/* Page size: this field specifies 'N' so the page size = 2^N bytes. */
|
||||
params->page_size = bfpt.dwords[BFPT_DWORD(11)];
|
||||
params->page_size &= BFPT_DWORD11_PAGE_SIZE_MASK;
|
||||
params->page_size >>= BFPT_DWORD11_PAGE_SIZE_SHIFT;
|
||||
params->page_size = 1U << params->page_size;
|
||||
|
||||
/* Quad Enable Requirements. */
|
||||
switch (bfpt.dwords[BFPT_DWORD(15)] & BFPT_DWORD15_QER_MASK) {
|
||||
case BFPT_DWORD15_QER_NONE:
|
||||
params->quad_enable = NULL;
|
||||
break;
|
||||
|
||||
case BFPT_DWORD15_QER_SR2_BIT1_BUGGY:
|
||||
case BFPT_DWORD15_QER_SR2_BIT1_NO_RD:
|
||||
params->quad_enable = spansion_no_read_cr_quad_enable;
|
||||
break;
|
||||
|
||||
case BFPT_DWORD15_QER_SR1_BIT6:
|
||||
params->quad_enable = macronix_quad_enable;
|
||||
break;
|
||||
|
||||
case BFPT_DWORD15_QER_SR2_BIT7:
|
||||
params->quad_enable = sr2_bit7_quad_enable;
|
||||
break;
|
||||
|
||||
case BFPT_DWORD15_QER_SR2_BIT1:
|
||||
params->quad_enable = spansion_read_cr_quad_enable;
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
/**
|
||||
* spi_nor_parse_sfdp() - parse the Serial Flash Discoverable Parameters.
|
||||
* @nor: pointer to a 'struct spi_nor'
|
||||
* @params: pointer to the 'struct spi_nor_flash_parameter' to be
|
||||
* filled
|
||||
*
|
||||
* The Serial Flash Discoverable Parameters are described by the JEDEC JESD216
|
||||
* specification. This is a standard which tends to supported by almost all
|
||||
* (Q)SPI memory manufacturers. Those hard-coded tables allow us to learn at
|
||||
* runtime the main parameters needed to perform basic SPI flash operations such
|
||||
* as Fast Read, Page Program or Sector Erase commands.
|
||||
*
|
||||
* Return: 0 on success, -errno otherwise.
|
||||
*/
|
||||
static int spi_nor_parse_sfdp(struct spi_nor *nor,
|
||||
struct spi_nor_flash_parameter *params)
|
||||
{
|
||||
const struct sfdp_parameter_header *param_header, *bfpt_header;
|
||||
struct sfdp_parameter_header *param_headers = NULL;
|
||||
struct sfdp_header header;
|
||||
struct device *dev = nor->dev;
|
||||
size_t psize;
|
||||
int i, err;
|
||||
|
||||
/* Get the SFDP header. */
|
||||
err = spi_nor_read_sfdp(nor, 0, sizeof(header), &header);
|
||||
if (err < 0)
|
||||
return err;
|
||||
|
||||
/* Check the SFDP header version. */
|
||||
if (le32_to_cpu(header.signature) != SFDP_SIGNATURE ||
|
||||
header.major != SFDP_JESD216_MAJOR ||
|
||||
header.minor < SFDP_JESD216_MINOR)
|
||||
return -EINVAL;
|
||||
|
||||
/*
|
||||
* Verify that the first and only mandatory parameter header is a
|
||||
* Basic Flash Parameter Table header as specified in JESD216.
|
||||
*/
|
||||
bfpt_header = &header.bfpt_header;
|
||||
if (SFDP_PARAM_HEADER_ID(bfpt_header) != SFDP_BFPT_ID ||
|
||||
bfpt_header->major != SFDP_JESD216_MAJOR)
|
||||
return -EINVAL;
|
||||
|
||||
/*
|
||||
* Allocate memory then read all parameter headers with a single
|
||||
* Read SFDP command. These parameter headers will actually be parsed
|
||||
* twice: a first time to get the latest revision of the basic flash
|
||||
* parameter table, then a second time to handle the supported optional
|
||||
* tables.
|
||||
* Hence we read the parameter headers once for all to reduce the
|
||||
* processing time. Also we use kmalloc() instead of devm_kmalloc()
|
||||
* because we don't need to keep these parameter headers: the allocated
|
||||
* memory is always released with kfree() before exiting this function.
|
||||
*/
|
||||
if (header.nph) {
|
||||
psize = header.nph * sizeof(*param_headers);
|
||||
|
||||
param_headers = kmalloc(psize, GFP_KERNEL);
|
||||
if (!param_headers)
|
||||
return -ENOMEM;
|
||||
|
||||
err = spi_nor_read_sfdp(nor, sizeof(header),
|
||||
psize, param_headers);
|
||||
if (err < 0) {
|
||||
dev_err(dev, "failed to read SFDP parameter headers\n");
|
||||
goto exit;
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* Check other parameter headers to get the latest revision of
|
||||
* the basic flash parameter table.
|
||||
*/
|
||||
for (i = 0; i < header.nph; i++) {
|
||||
param_header = ¶m_headers[i];
|
||||
|
||||
if (SFDP_PARAM_HEADER_ID(param_header) == SFDP_BFPT_ID &&
|
||||
param_header->major == SFDP_JESD216_MAJOR &&
|
||||
(param_header->minor > bfpt_header->minor ||
|
||||
(param_header->minor == bfpt_header->minor &&
|
||||
param_header->length > bfpt_header->length)))
|
||||
bfpt_header = param_header;
|
||||
}
|
||||
|
||||
err = spi_nor_parse_bfpt(nor, bfpt_header, params);
|
||||
if (err)
|
||||
goto exit;
|
||||
|
||||
/* Parse other parameter headers. */
|
||||
for (i = 0; i < header.nph; i++) {
|
||||
param_header = ¶m_headers[i];
|
||||
|
||||
switch (SFDP_PARAM_HEADER_ID(param_header)) {
|
||||
case SFDP_SECTOR_MAP_ID:
|
||||
dev_info(dev, "non-uniform erase sector maps are not supported yet.\n");
|
||||
break;
|
||||
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
if (err)
|
||||
goto exit;
|
||||
}
|
||||
|
||||
exit:
|
||||
kfree(param_headers);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int spi_nor_init_params(struct spi_nor *nor,
|
||||
const struct flash_info *info,
|
||||
struct spi_nor_flash_parameter *params)
|
||||
|
|
@ -1646,11 +2372,28 @@ static int spi_nor_init_params(struct spi_nor *nor,
|
|||
break;
|
||||
|
||||
default:
|
||||
/* Kept only for backward compatibility purpose. */
|
||||
params->quad_enable = spansion_quad_enable;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
/* Override the parameters with data read from SFDP tables. */
|
||||
nor->addr_width = 0;
|
||||
nor->mtd.erasesize = 0;
|
||||
if ((info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) &&
|
||||
!(info->flags & SPI_NOR_SKIP_SFDP)) {
|
||||
struct spi_nor_flash_parameter sfdp_params;
|
||||
|
||||
memcpy(&sfdp_params, params, sizeof(sfdp_params));
|
||||
if (spi_nor_parse_sfdp(nor, &sfdp_params)) {
|
||||
nor->addr_width = 0;
|
||||
nor->mtd.erasesize = 0;
|
||||
} else {
|
||||
memcpy(params, &sfdp_params, sizeof(*params));
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
@ -1762,6 +2505,10 @@ static int spi_nor_select_erase(struct spi_nor *nor,
|
|||
{
|
||||
struct mtd_info *mtd = &nor->mtd;
|
||||
|
||||
/* Do nothing if already configured from SFDP. */
|
||||
if (mtd->erasesize)
|
||||
return 0;
|
||||
|
||||
#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
|
||||
/* prefer "small sector" erase if possible */
|
||||
if (info->flags & SECT_4K) {
|
||||
|
|
@ -1994,9 +2741,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (info->addr_width)
|
||||
if (nor->addr_width) {
|
||||
/* already configured from SFDP */
|
||||
} else if (info->addr_width) {
|
||||
nor->addr_width = info->addr_width;
|
||||
else if (mtd->size > 0x1000000) {
|
||||
} else if (mtd->size > 0x1000000) {
|
||||
/* enable 4-byte addressing if the device exceeds 16MiB */
|
||||
nor->addr_width = 4;
|
||||
if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
|
||||
|
|
|
|||
|
|
@ -41,6 +41,8 @@
|
|||
#define SPINOR_OP_WREN 0x06 /* Write enable */
|
||||
#define SPINOR_OP_RDSR 0x05 /* Read status register */
|
||||
#define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */
|
||||
#define SPINOR_OP_RDSR2 0x3f /* Read status register 2 */
|
||||
#define SPINOR_OP_WRSR2 0x3e /* Write status register 2 */
|
||||
#define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */
|
||||
#define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */
|
||||
#define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */
|
||||
|
|
@ -56,6 +58,7 @@
|
|||
#define SPINOR_OP_CHIP_ERASE 0xc7 /* Erase whole flash chip */
|
||||
#define SPINOR_OP_SE 0xd8 /* Sector erase (usually 64KiB) */
|
||||
#define SPINOR_OP_RDID 0x9f /* Read JEDEC ID */
|
||||
#define SPINOR_OP_RDSFDP 0x5a /* Read SFDP */
|
||||
#define SPINOR_OP_RDCR 0x35 /* Read configuration register */
|
||||
#define SPINOR_OP_RDFSR 0x70 /* Read flag status register */
|
||||
|
||||
|
|
@ -128,6 +131,9 @@
|
|||
/* Configuration Register bits. */
|
||||
#define CR_QUAD_EN_SPAN BIT(1) /* Spansion Quad I/O */
|
||||
|
||||
/* Status Register 2 bits. */
|
||||
#define SR2_QUAD_EN_BIT7 BIT(7)
|
||||
|
||||
/* Supported SPI protocols */
|
||||
#define SNOR_PROTO_INST_MASK GENMASK(23, 16)
|
||||
#define SNOR_PROTO_INST_SHIFT 16
|
||||
|
|
|
|||
Loading…
Reference in New Issue