Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (22 commits)
  MIPS: Ignore vmlinux.*
  MIPS: Move vmlinux.ecoff to arch/mips/boot
  MIPS: cpumask_of_node() should handle -1 as a node
  MIPS: Octeon: Use non-overflowing arithmetic in sched_clock
  MIPS: Malta, PowerTV: Remove unnecessary "Linux started"
  MIPS: BCM63xx: Remove duplicate CONFIG_CMDLINE.
  MIPS: AR7: Remove unused prom_getchar()
  MIPS: PowerTV: Remove extra r4k_clockevent_init() call
  MIPS: Cobalt use strlcat() for the command line arguments
  MIPS: Octeon: Add sched_clock() to csrc-octeon.c
  MIPS: TXx9: Cleanup builtin-cmdline processing
  MIPS: PowerTV: simplify prom_init_cmdline() and merge into prom_init()
  MIPS: PowerTV: Remove unused platform_die()
  MIPS: PowerTV: Remove mips_machine_halt()
  MIPS: PowerTV: Remove unused ptv_memsize
  MIPS: PowerTV: Remove unused prom_getcmdline()
  MIPS: AR7: Remove kgdb_enabled
  MIPS: Alchemy: Correct code taking the size of a pointer
  MIPS: BCM63xx: Fix whitespace damaged board_bcm963xx.c
  MIPS: VR41xx: Use strlcat() for the command line arguments
  ...

arch/mips/alchemy/common/dbdma.c

@@ -613,7 +613,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
 	dma_cache_wback_inv((unsigned long)buf, nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	au_sync();
-	dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
 	/* Get next descriptor pointer.	*/
@@ -676,7 +676,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags)
 	dma_cache_inv((unsigned long)buf, nbytes);
 	dp->dscr_cmd0 |= DSCR_CMD0_V;	/* Let it rip */
 	au_sync();
-	dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
+	dma_cache_wback_inv((unsigned long)dp, sizeof(*dp));
 	ctp->chan_ptr->ddma_dbell = 0;
 
 	/* Get next descriptor pointer.	*/

arch/mips/ar7/prom.c

@@ -219,14 +219,6 @@ static void __init console_config(void)
 	if (strstr(prom_getcmdline(), "console="))
 		return;
 
-#ifdef CONFIG_KGDB
-	if (!strstr(prom_getcmdline(), "nokgdb")) {
-		strcat(prom_getcmdline(), " console=kgdb");
-		kgdb_enabled = 1;
-		return;
-	}
-#endif
-
 	s = prom_getenv("modetty0");
 	if (s) {
 		baud = simple_strtoul(s, &p, 10);
@@ -280,13 +272,6 @@ static inline void serial_out(int offset, int value)
 	writel(value, (void *)PORT(offset));
 }
 
-char prom_getchar(void)
-{
-	while (!(serial_in(UART_LSR) & UART_LSR_DR))
-		;
-	return serial_in(UART_RX);
-}
-
 int prom_putchar(char c)
 {
 	while ((serial_in(UART_LSR) & UART_LSR_TEMT) == 0)

arch/mips/bcm63xx/boards/board_bcm963xx.c

@@ -346,27 +346,26 @@ static struct board_info __initdata board_96348gw = {
 };
 
 static struct board_info __initdata board_FAST2404 = {
-        .name                           = "F@ST2404",
+	.name				= "F@ST2404",
-        .expected_cpu_id                = 0x6348,
+	.expected_cpu_id		= 0x6348,
 
-        .has_enet0                      = 1,
+	.has_enet0			= 1,
-        .has_enet1                      = 1,
+	.has_enet1			= 1,
-        .has_pci                        = 1,
+	.has_pci			= 1,
 
-        .enet0 = {
+	.enet0 = {
-                .has_phy                = 1,
+		.has_phy		= 1,
-                .use_internal_phy       = 1,
+		.use_internal_phy	= 1,
-        },
+	},
 
-        .enet1 = {
+	.enet1 = {
-                .force_speed_100        = 1,
+		.force_speed_100	= 1,
-                .force_duplex_full      = 1,
+		.force_duplex_full	= 1,
-        },
+	},
 
-
+	.has_ohci0			= 1,
-        .has_ohci0 = 1,
+	.has_pccard			= 1,
-        .has_pccard = 1,
+	.has_ehci0			= 1,
-        .has_ehci0 = 1,
 };
 
 static struct board_info __initdata board_DV201AMR = {

arch/mips/bcm63xx/prom.c

@@ -40,9 +40,6 @@ void __init prom_init(void)
 	reg &= ~mask;
 	bcm_perf_writel(reg, PERF_CKCTL_REG);
 
-	/* assign command line from kernel config */
-	strcpy(arcs_cmdline, CONFIG_CMDLINE);
-
 	/* register gpiochip */
 	bcm63xx_gpio_init();
 

arch/mips/boot/.gitignore

@@ -1,4 +1,5 @@
 mkboot
 elf2ecoff
+vmlinux.*
 zImage
 zImage.tmp

arch/mips/boot/Makefile

@@ -28,7 +28,7 @@ VMLINUX = vmlinux
 all: vmlinux.ecoff vmlinux.srec
 
 vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
-	$(obj)/elf2ecoff $(VMLINUX) vmlinux.ecoff $(E2EFLAGS)
+	$(obj)/elf2ecoff $(VMLINUX) $(obj)/vmlinux.ecoff $(E2EFLAGS)
 
 $(obj)/elf2ecoff: $(obj)/elf2ecoff.c
 	$(HOSTCC) -o $@ $^

arch/mips/boot/compressed/Makefile

@@ -56,7 +56,7 @@ $(obj)/piggy.o: $(obj)/vmlinux.$(suffix_y) $(obj)/dummy.o
 LDFLAGS_vmlinuz := $(LDFLAGS) -Ttext $(VMLINUZ_LOAD_ADDRESS) -T
 vmlinuz: $(src)/ld.script $(obj-y) $(obj)/piggy.o
 	$(call if_changed,ld)
-	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) -R .comment -R .stab -R .stabstr -R .initrd -R .sysmap $@
+	$(Q)$(OBJCOPY) $(OBJCOPYFLAGS) $@
 
 #
 # Some DECstations need all possible sections of an ECOFF executable
@@ -84,14 +84,11 @@ vmlinuz.ecoff: $(obj)/../elf2ecoff $(VMLINUZ)
 $(obj)/../elf2ecoff: $(src)/../elf2ecoff.c
 	$(Q)$(HOSTCC) -o $@ $^
 
-drop-sections	= .reginfo .mdebug .comment .note .pdr .options .MIPS.options
+OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary
-strip-flags	= $(addprefix --remove-section=,$(drop-sections))
-
-OBJCOPYFLAGS_vmlinuz.bin := $(OBJCOPYFLAGS) -O binary $(strip-flags)
 vmlinuz.bin: vmlinuz
 	$(call if_changed,objcopy)
 
-OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec $(strip-flags)
+OBJCOPYFLAGS_vmlinuz.srec := $(OBJCOPYFLAGS) -S -O srec
 vmlinuz.srec: vmlinuz
 	$(call if_changed,objcopy)
 

arch/mips/boot/compressed/decompress.c

@@ -28,8 +28,6 @@ char *zimage_start;
 
 /* The linker tells us where the image is. */
 extern unsigned char __image_begin, __image_end;
-extern unsigned char __ramdisk_begin, __ramdisk_end;
-unsigned long initrd_size;
 
 /* debug interfaces  */
 extern void puts(const char *s);
@@ -102,14 +100,6 @@ void decompress_kernel(unsigned long boot_heap_start)
 	puthex((unsigned long)(zimage_size + zimage_start));
 	puts("\n");
 
-	if (initrd_size) {
-		puts("initrd at:     ");
-		puthex((unsigned long)(&__ramdisk_begin));
-		puts(" ");
-		puthex((unsigned long)(&__ramdisk_end));
-		puts("\n");
-	}
-
 	/* this area are prepared for mallocing when decompressing */
 	free_mem_ptr = boot_heap_start;
 	free_mem_end_ptr = boot_heap_start + BOOT_HEAP_SIZE;

arch/mips/boot/compressed/ld.script

@@ -1,150 +1,67 @@
+/*
+ * ld.script for compressed kernel support of MIPS
+ *
+ * Copyright (C) 2009 Lemote Inc.
+ * Author: Wu Zhangjin <wuzj@lemote.com>
+ */
+
 OUTPUT_ARCH(mips)
 ENTRY(start)
 SECTIONS
 {
-  /* Read-only sections, merged into text segment: */
+	/* . = VMLINUZ_LOAD_ADDRESS */
-  .init          : { *(.init)		} =0
+	/* read-only */
-  .text      :
+	_text = .;	/* Text and read-only data */
-  {
+	.text	: {
-    _ftext = . ;
+		_ftext = . ;
-    *(.text)
+		*(.text)
-    *(.rodata)
+		*(.rodata)
-    *(.rodata1)
+	} = 0
-    /* .gnu.warning sections are handled specially by elf32.em.  */
+	_etext = .;	/* End of text section */
-    *(.gnu.warning)
-  } =0
-  .kstrtab : { *(.kstrtab) }
 
-  . = ALIGN(16);		/* Exception table */
+	/* writable */
-  __start___ex_table = .;
+	.data	: {	/* Data */
-  __ex_table : { *(__ex_table) }
+		_fdata = . ;
-  __stop___ex_table = .;
+		*(.data)
+		/* Put the compressed image here, so bss is on the end. */
+		__image_begin = .;
+		*(.image)
+		__image_end = .;
+		CONSTRUCTORS
+	}
+	.sdata	: { *(.sdata) }
+	. = ALIGN(4);
+	_edata  =  .;	/* End of data section */
 
-  __start___dbe_table = .;	/* Exception table for data bus errors */
+	/* BSS */
-  __dbe_table : { *(__dbe_table) }
+	__bss_start = .;
-  __stop___dbe_table = .;
+	_fbss = .;
+	.sbss	: { *(.sbss) *(.scommon) }
+	.bss	: {
+		*(.dynbss)
+		*(.bss)
+		*(COMMON)
+	}
+	.  = ALIGN(4);
+	_end = . ;
 
-  __start___ksymtab = .;	/* Kernel symbol table */
+	/* These are needed for ELF backends which have not yet been converted
-  __ksymtab : { *(__ksymtab) }
+	 * to the new style linker.  */
-  __stop___ksymtab = .;
 
-  _etext = .;
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
 
-  . = ALIGN(8192);
+	/* These must appear regardless of  .  */
-  .data.init_task : { *(.data.init_task) }
+	.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
+	.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
 
-  /* Startup code */
+	/* Sections to be discarded */
-  . = ALIGN(4096);
+	/DISCARD/	: {
-  __init_begin = .;
+		*(.MIPS.options)
-  .text.init : { *(.text.init) }
+		*(.options)
-  .data.init : { *(.data.init) }
+		*(.pdr)
-  . = ALIGN(16);
+		*(.reginfo)
-  __setup_start = .;
+		*(.comment)
-  .setup.init : { *(.setup.init) }
+		*(.note)
-  __setup_end = .;
+	}
-  __initcall_start = .;
-  .initcall.init : { *(.initcall.init) }
-  __initcall_end = .;
-  . = ALIGN(4096);	/* Align double page for init_task_union */
-  __init_end = .;
-
-  . = ALIGN(4096);
-  .data.page_aligned : { *(.data.idt) }
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
-  .fini      : { *(.fini)    } =0
-  .reginfo : { *(.reginfo) }
-  /* Adjust the address for the data segment.  We want to adjust up to
-     the same address within the page on the next page up.  It would
-     be more correct to do this:
-       . = .;
-     The current expression does not correctly handle the case of a
-     text segment ending precisely at the end of a page; it causes the
-     data segment to skip a page.  The above expression does not have
-     this problem, but it will currently (2/95) cause BFD to allocate
-     a single segment, combining both text and data, for this case.
-     This will prevent the text segment from being shared among
-     multiple executions of the program; I think that is more
-     important than losing a page of the virtual address space (note
-     that no actual memory is lost; the page which is skipped can not
-     be referenced).  */
-  . = .;
-  .data    :
-  {
-    _fdata = . ;
-    *(.data)
-
-   /* Put the compressed image here, so bss is on the end. */
-   __image_begin = .;
-   *(.image)
-   __image_end = .;
-   /* Align the initial ramdisk image (INITRD) on page boundaries. */
-   . = ALIGN(4096);
-   __ramdisk_begin = .;
-   *(.initrd)
-   __ramdisk_end = .;
-   . = ALIGN(4096);
-
-    CONSTRUCTORS
-  }
-  .data1   : { *(.data1) }
-  _gp = . + 0x8000;
-  .lit8 : { *(.lit8) }
-  .lit4 : { *(.lit4) }
-  .ctors         : { *(.ctors)   }
-  .dtors         : { *(.dtors)   }
-  .got           : { *(.got.plt) *(.got) }
-  .dynamic       : { *(.dynamic) }
-  /* We want the small data sections together, so single-instruction offsets
-     can access them all, and initialized data all before uninitialized, so
-     we can shorten the on-disk segment size.  */
-  .sdata     : { *(.sdata) }
-  . = ALIGN(4);
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __bss_start = .;
-  _fbss = .;
-  .sbss      : { *(.sbss) *(.scommon) }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   .  = ALIGN(4);
-  _end = . ;
-  PROVIDE (end = .);
-  }
-
-  /* Sections to be discarded */
-  /DISCARD/ :
-  {
-        *(.text.exit)
-        *(.data.exit)
-        *(.exitcall.exit)
-  }
-
-  /* This is the MIPS specific mdebug section.  */
-  .mdebug : { *(.mdebug) }
-  /* These are needed for ELF backends which have not yet been
-     converted to the new style linker.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  /* DWARF debug sections.
-     Symbols in the .debug DWARF section are relative to the beginning of the
-     section so we begin .debug at 0.  It's not clear yet what needs to happen
-     for the others.   */
-  .debug          0 : { *(.debug) }
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  .line           0 : { *(.line) }
-  /* These must appear regardless of  .  */
-  .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
-  .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
-  .comment : { *(.comment) }
-  .note : { *(.note) }
 }

arch/mips/cavium-octeon/csrc-octeon.c

@@ -50,6 +50,38 @@ static struct clocksource clocksource_mips = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+unsigned long long notrace sched_clock(void)
+{
+	/* 64-bit arithmatic can overflow, so use 128-bit.  */
+#if (__GNUC__ < 4) || ((__GNUC__ == 4) && (__GNUC_MINOR__ <= 3))
+	u64 t1, t2, t3;
+	unsigned long long rv;
+	u64 mult = clocksource_mips.mult;
+	u64 shift = clocksource_mips.shift;
+	u64 cnt = read_c0_cvmcount();
+
+	asm (
+		"dmultu\t%[cnt],%[mult]\n\t"
+		"nor\t%[t1],$0,%[shift]\n\t"
+		"mfhi\t%[t2]\n\t"
+		"mflo\t%[t3]\n\t"
+		"dsll\t%[t2],%[t2],1\n\t"
+		"dsrlv\t%[rv],%[t3],%[shift]\n\t"
+		"dsllv\t%[t1],%[t2],%[t1]\n\t"
+		"or\t%[rv],%[t1],%[rv]\n\t"
+		: [rv] "=&r" (rv), [t1] "=&r" (t1), [t2] "=&r" (t2), [t3] "=&r" (t3)
+		: [cnt] "r" (cnt), [mult] "r" (mult), [shift] "r" (shift)
+		: "hi", "lo");
+	return rv;
+#else
+	/* GCC > 4.3 do it the easy way.  */
+	unsigned int __attribute__((mode(TI))) t;
+	t = read_c0_cvmcount();
+	t = t * clocksource_mips.mult;
+	return (unsigned long long)(t >> clocksource_mips.shift);
+#endif
+}
+
 void __init plat_time_init(void)
 {
 	clocksource_mips.rating = 300;

arch/mips/cobalt/setup.c

@@ -97,26 +97,18 @@ void __init plat_mem_setup(void)
 
 void __init prom_init(void)
 {
-	int narg, indx, posn, nchr;
 	unsigned long memsz;
+	int argc, i;
 	char **argv;
 
 	memsz = fw_arg0 & 0x7fff0000;
-	narg = fw_arg0 & 0x0000ffff;
+	argc = fw_arg0 & 0x0000ffff;
+	argv = (char **)fw_arg1;
 
-	if (narg) {
+	for (i = 1; i < argc; i++) {
-		arcs_cmdline[0] = '\0';
+		strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
-		argv = (char **) fw_arg1;
+		if (i < (argc - 1))
-		posn = 0;
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
-		for (indx = 1; indx < narg; ++indx) {
-			nchr = strlen(argv[indx]);
-			if (posn + 1 + nchr + 1 > sizeof(arcs_cmdline))
-				break;
-			if (posn)
-				arcs_cmdline[posn++] = ' ';
-			strcpy(arcs_cmdline + posn, argv[indx]);
-			posn += nchr;
-		}
 	}
 
 	add_memory_region(0x0, memsz, BOOT_MEM_RAM);

arch/mips/include/asm/mach-ip27/topology.h

@@ -24,7 +24,9 @@ extern struct cpuinfo_ip27 sn_cpu_info[NR_CPUS];
 
 #define cpu_to_node(cpu)	(sn_cpu_info[(cpu)].p_nodeid)
 #define parent_node(node)	(node)
-#define cpumask_of_node(node)	(&hub_data(node)->h_cpus)
+#define cpumask_of_node(node)	((node) == -1 ?				\
+				 cpu_all_mask :				\
+				 &hub_data(node)->h_cpus)
 struct pci_bus;
 extern int pcibus_to_node(struct pci_bus *);
 

arch/mips/mipssim/sim_setup.c

@@ -49,9 +49,6 @@ void __init plat_mem_setup(void)
 	set_io_port_base(0xbfd00000);
 
 	serial_init();
-
-	pr_info("Linux started...\n");
-
 }
 
 extern struct plat_smp_ops ssmtc_smp_ops;
@@ -60,7 +57,6 @@ void __init prom_init(void)
 {
 	set_io_port_base(0xbfd00000);
 
-	pr_info("\nLINUX started...\n");
 	prom_meminit();
 
 #ifdef CONFIG_MIPS_MT_SMP

arch/mips/mm/tlbex.c

@@ -73,9 +73,6 @@ static int __cpuinit m4kc_tlbp_war(void)
 enum label_id {
 	label_second_part = 1,
 	label_leave,
-#ifdef MODULE_START
-	label_module_alloc,
-#endif
 	label_vmalloc,
 	label_vmalloc_done,
 	label_tlbw_hazard,
@@ -92,9 +89,6 @@ enum label_id {
 
 UASM_L_LA(_second_part)
 UASM_L_LA(_leave)
-#ifdef MODULE_START
-UASM_L_LA(_module_alloc)
-#endif
 UASM_L_LA(_vmalloc)
 UASM_L_LA(_vmalloc_done)
 UASM_L_LA(_tlbw_hazard)
@@ -818,8 +812,6 @@ static void __cpuinit build_r4000_tlb_refill_handler(void)
 	} else {
 #if defined(CONFIG_HUGETLB_PAGE)
 		const enum label_id ls = label_tlb_huge_update;
-#elif defined(MODULE_START)
-		const enum label_id ls = label_module_alloc;
 #else
 		const enum label_id ls = label_vmalloc;
 #endif

arch/mips/mti-malta/malta-init.c

@@ -355,7 +355,6 @@ void __init prom_init(void)
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
-	pr_info("\nLINUX started...\n");
 	prom_init_cmdline();
 	prom_meminit();
 #ifdef CONFIG_SERIAL_8250_CONSOLE

arch/mips/powertv/Makefile

@@ -23,6 +23,6 @@
 # under Linux.
 #
 
-obj-y += cmdline.o init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
+obj-y += init.o memory.o reset.o time.o powertv_setup.o asic/ pci/
 
 EXTRA_CFLAGS += -Wall -Werror

arch/mips/powertv/cmdline.c

@@ -1,52 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
- * Portions copyright (C) 2009 Cisco Systems, Inc.
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * Kernel command line creation using the prom monitor (YAMON) argc/argv.
- */
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include "init.h"
-
-/*
- * YAMON (32-bit PROM) pass arguments and environment as 32-bit pointer.
- * This macro take care of sign extension.
- */
-#define prom_argv(index) ((char *)(long)_prom_argv[(index)])
-
-char * __init prom_getcmdline(void)
-{
-	return &(arcs_cmdline[0]);
-}
-
-void  __init prom_init_cmdline(void)
-{
-	int len;
-
-	if (prom_argc != 1)
-		return;
-
-	len = strlen(arcs_cmdline);
-
-	arcs_cmdline[len] = ' ';
-
-	strlcpy(arcs_cmdline + len + 1, (char *)_prom_argv,
-		COMMAND_LINE_SIZE - len - 1);
-}

arch/mips/powertv/init.c

@@ -34,10 +34,7 @@
 #include <asm/mips-boards/generic.h>
 #include <asm/mach-powertv/asic.h>
 
-#include "init.h"
+static int *_prom_envp;
-
-int prom_argc;
-int *_prom_argv, *_prom_envp;
 unsigned long _prom_memsize;
 
 /*
@@ -109,16 +106,20 @@ static void __init mips_ejtag_setup(void)
 
 void __init prom_init(void)
 {
+	int prom_argc;
+	char *prom_argv;
+
 	prom_argc = fw_arg0;
-	_prom_argv = (int *) fw_arg1;
+	prom_argv = (char *) fw_arg1;
 	_prom_envp = (int *) fw_arg2;
 	_prom_memsize = (unsigned long) fw_arg3;
 
 	board_nmi_handler_setup = mips_nmi_setup;
 	board_ejtag_handler_setup = mips_ejtag_setup;
 
-	pr_info("\nLINUX started...\n");
+	if (prom_argc == 1)
-	prom_init_cmdline();
+		strlcat(arcs_cmdline, prom_argv, COMMAND_LINE_SIZE);
+
 	configure_platform();
 	prom_meminit();
 

arch/mips/powertv/init.h

@@ -22,7 +22,5 @@
 
 #ifndef _POWERTV_INIT_H
 #define _POWERTV_INIT_H
-extern int prom_argc;
-extern int *_prom_argv;
 extern unsigned long _prom_memsize;
 #endif

arch/mips/powertv/memory.c

@@ -42,8 +42,6 @@
 #define BOOT_MEM_SIZE		KIBIBYTE(256)	/* Memory reserved for bldr */
 #define PHYS_MEM_START		0x10000000	/* Start of physical memory */
 
-unsigned long ptv_memsize;
-
 char __initdata cmdline[COMMAND_LINE_SIZE];
 
 void __init prom_meminit(void)
@@ -87,9 +85,6 @@ void __init prom_meminit(void)
 		}
 	}
 
-	/* Store memsize for diagnostic purposes */
-	ptv_memsize = memsize;
-
 	physend = PFN_ALIGN(&_end) - 0x80000000;
 	if (memsize > LOW_MEM_MAX) {
 		low_mem = LOW_MEM_MAX;

arch/mips/powertv/powertv_setup.c

@@ -64,9 +64,6 @@
 #define REG_SIZE	"4"		/* In bytes */
 #endif
 
-static struct pt_regs die_regs;
-static bool have_die_regs;
-
 static void register_panic_notifier(void);
 static int panic_handler(struct notifier_block *notifier_block,
 	unsigned long event, void *cause_string);
@@ -218,24 +215,6 @@ static int panic_handler(struct notifier_block *notifier_block,
 	return NOTIFY_DONE;
 }
 
-/**
- * Platform-specific handling of oops
- * @str:	Pointer to the oops string
- * @regs:	Pointer to the oops registers
- * All we do here is to save the registers for subsequent printing through
- * the panic notifier.
- */
-void platform_die(const char *str, const struct pt_regs *regs)
-{
-	/* If we already have saved registers, don't overwrite them as they
-	 * they apply to the initial fault */
-
-	if (!have_die_regs) {
-		have_die_regs = true;
-		die_regs = *regs;
-	}
-}
-
 /* Information about the RF MAC address, if one was supplied on the
  * command line. */
 static bool have_rfmac;

arch/mips/powertv/reset.c

@@ -28,9 +28,6 @@
 #include <asm/mach-powertv/asic_regs.h>
 #include "reset.h"
 
-static void mips_machine_restart(char *command);
-static void mips_machine_halt(void);
-
 static void mips_machine_restart(char *command)
 {
 #ifdef CONFIG_BOOTLOADER_DRIVER
@@ -44,22 +41,7 @@ static void mips_machine_restart(char *command)
 #endif
 }
 
-static void mips_machine_halt(void)
-{
-#ifdef CONFIG_BOOTLOADER_DRIVER
-	/*
-	 * Call the bootloader's reset function to ensure
-	 * that persistent data is flushed before hard reset
-	 */
-	kbldr_SetCauseAndReset();
-#else
-	writel(0x1, asic_reg_addr(watchdog));
-#endif
-}
-
 void mips_reboot_setup(void)
 {
 	_machine_restart = mips_machine_restart;
-	_machine_halt = mips_machine_halt;
-	pm_power_off = mips_machine_halt;
 }

arch/mips/powertv/time.c

@@ -33,5 +33,4 @@ unsigned int __cpuinit get_c0_compare_int(void)
 void __init plat_time_init(void)
 {
 	powertv_clocksource_init();
-	r4k_clockevent_init();
 }

arch/mips/txx9/generic/setup.c

@@ -160,7 +160,6 @@ static void __init prom_init_cmdline(void)
 	int argc;
 	int *argv32;
 	int i;			/* Always ignore the "-c" at argv[0] */
-	static char builtin[COMMAND_LINE_SIZE] __initdata;
 
 	if (fw_arg0 >= CKSEG0 || fw_arg1 < CKSEG0) {
 		/*
@@ -174,20 +173,6 @@ static void __init prom_init_cmdline(void)
 		argv32 = (int *)fw_arg1;
 	}
 
-	/* ignore all built-in args if any f/w args given */
-	/*
-	 * But if built-in strings was started with '+', append them
-	 * to command line args.  If built-in was started with '-',
-	 * ignore all f/w args.
-	 */
-	builtin[0] = '\0';
-	if (arcs_cmdline[0] == '+')
-		strcpy(builtin, arcs_cmdline + 1);
-	else if (arcs_cmdline[0] == '-') {
-		strcpy(builtin, arcs_cmdline + 1);
-		argc = 0;
-	} else if (argc <= 1)
-		strcpy(builtin, arcs_cmdline);
 	arcs_cmdline[0] = '\0';
 
 	for (i = 1; i < argc; i++) {
@@ -201,12 +186,6 @@ static void __init prom_init_cmdline(void)
 		} else
 			strcat(arcs_cmdline, str);
 	}
-	/* append saved builtin args */
-	if (builtin[0]) {
-		if (arcs_cmdline[0])
-			strcat(arcs_cmdline, " ");
-		strcat(arcs_cmdline, builtin);
-	}
 }
 
 static int txx9_ic_disable __initdata;

arch/mips/vr41xx/common/init.c

@@ -1,7 +1,7 @@
 /*
  *  init.c, Common initialization routines for NEC VR4100 series.
  *
- *  Copyright (C) 2003-2008  Yoichi Yuasa <yuasa@linux-mips.org>
+ *  Copyright (C) 2003-2009  Yoichi Yuasa <yuasa@linux-mips.org>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
@@ -66,9 +66,9 @@ void __init prom_init(void)
 	argv = (char **)fw_arg1;
 
 	for (i = 1; i < argc; i++) {
-		strcat(arcs_cmdline, argv[i]);
+		strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE);
 		if (i < (argc - 1))
-			strcat(arcs_cmdline, " ");
+			strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE);
 	}
 }