UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 

Fix merge between commit 3adadc08cc ("net ax25: Reorder ax25_exit to
remove races") and commit 0ca7a4c87d ("net ax25: Simplify and
cleanup the ax25 sysctl handling")

The former moved around the sysctl register/unregister calls, the
later simply removed them.

With help from Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2012-04-23 23:14:36 -04:00
parent a108d5f35a 4d634ca35a
commit f24001941c
449 changed files with 4115 additions and 2864 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
Documentation/ABI/stable/sysfs-driver-usb-usbtmc
View File

@ -1,5 +1,5 @@
What: /sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
What: /sys/bus/usb/drivers/usbtmc/*/interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/*/device_capabilities
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
@ -12,8 +12,8 @@ Description:
The files are read only.
What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
What: /sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
What: /sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
@ -27,7 +27,7 @@ Description:
The files are read only.
What: /sys/bus/usb/drivers/usbtmc/devices/*/TermChar
What: /sys/bus/usb/drivers/usbtmc/*/TermChar
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
@ -40,7 +40,7 @@ Description:
sent to the device or not.
What: /sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
What: /sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:
@ -51,7 +51,7 @@ Description:
published by the USB-IF.
What: /sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
What: /sys/bus/usb/drivers/usbtmc/*/auto_abort
Date: August 2008
Contact: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Description:

18
Documentation/ABI/testing/sysfs-block-rssd Normal file
View File

@ -0,0 +1,18 @@
What: /sys/block/rssd*/registers
Date: March 2012
KernelVersion: 3.3
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Dumps below driver information and
hardware registers.
- S ACTive
- Command Issue
- Allocated
- Completed
- PORT IRQ STAT
- HOST IRQ STAT
What: /sys/block/rssd*/status
Date: April 2012
KernelVersion: 3.4
Contact: Asai Thambi S P <asamymuthupa@micron.com>
Description: This is a read-only file. Indicates the status of the device.

8
Documentation/ABI/testing/sysfs-cfq-target-latency Normal file
View File

@ -0,0 +1,8 @@
What: /sys/block/<device>/iosched/target_latency
Date: March 2012
contact: Tao Ma <boyu.mt@taobao.com>
Description:
The /sys/block/<device>/iosched/target_latency only exists
when the user sets cfq to /sys/block/<device>/scheduler.
It contains an estimated latency time for the cfq. cfq will
use it to calculate the time slice used for every task.

2
Documentation/DocBook/media/v4l/pixfmt-nv12m.xml
View File

@ -1,6 +1,6 @@
<refentry id="V4L2-PIX-FMT-NV12M">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>

2
Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml
View File

@ -1,6 +1,6 @@
<refentry id="V4L2-PIX-FMT-YUV420M">
<refmeta>
<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
&manvol;
</refmeta>
<refnamediv>

8
Documentation/feature-removal-schedule.txt
View File

@ -531,3 +531,11 @@ Why: There appear to be no production users of the get_robust_list syscall,
of ASLR. It was only ever intended for debugging, so it should be
removed.
Who: Kees Cook <keescook@chromium.org>
----------------------------
What: setitimer accepts user NULL pointer (value)
When: 3.6
Why: setitimer is not returning -EFAULT if user pointer is NULL. This
violates the spec.
Who: Sasikantha Babu <sasikanth.v19@gmail.com>

4
Documentation/sound/alsa/HD-Audio-Models.txt
View File

@ -43,7 +43,9 @@ ALC680
ALC882/883/885/888/889
======================
N/A
acer-aspire-4930g Acer Aspire 4930G/5930G/6530G/6930G/7730G
acer-aspire-8930g Acer Aspire 8330G/6935G
acer-aspire Acer Aspire others
ALC861/660
==========

22
Documentation/usb/URB.txt
View File

@ -168,6 +168,28 @@ that if the completion handler or anyone else tries to resubmit it
they will get a -EPERM error. Thus you can be sure that when
usb_kill_urb() returns, the URB is totally idle.
There is a lifetime issue to consider. An URB may complete at any
time, and the completion handler may free the URB. If this happens
while usb_unlink_urb or usb_kill_urb is running, it will cause a
memory-access violation. The driver is responsible for avoiding this,
which often means some sort of lock will be needed to prevent the URB
from being deallocated while it is still in use.
On the other hand, since usb_unlink_urb may end up calling the
completion handler, the handler must not take any lock that is held
when usb_unlink_urb is invoked. The general solution to this problem
is to increment the URB's reference count while holding the lock, then
drop the lock and call usb_unlink_urb or usb_kill_urb, and then
decrement the URB's reference count. You increment the reference
count by calling
struct urb *usb_get_urb(struct urb *urb)
(ignore the return value; it is the same as the argument) and
decrement the reference count by calling usb_free_urb. Of course,
none of this is necessary if there's no danger of the URB being freed
by the completion handler.
1.7. What about the completion handler?

6
Documentation/usb/usbmon.txt
View File

@ -183,10 +183,10 @@ An input control transfer to get a port status.
d5ea89a0 3575914555 S Ci:1:001:0 s a3 00 0000 0003 0004 4 <
d5ea89a0 3575914560 C Ci:1:001:0 0 4 = 01050000
An output bulk transfer to send a SCSI command 0x5E in a 31-byte Bulk wrapper
to a storage device at address 5:
An output bulk transfer to send a SCSI command 0x28 (READ_10) in a 31-byte
Bulk wrapper to a storage device at address 5:
dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 5e000000 00000000 00000600 00000000 00000000 00000000 000000
dd65f0e8 4128379752 S Bo:1:005:2 -115 31 = 55534243 ad000000 00800000 80010a28 20000000 20000040 00000000 000000
dd65f0e8 4128379808 C Bo:1:005:2 0 31 >
* Raw binary format and API

6
MAINTAINERS
View File

@ -2322,9 +2322,9 @@ S: Supported
F: drivers/acpi/dock.c
DOCUMENTATION
M: Randy Dunlap <rdunlap@xenotime.net>
M: Rob Landley <rob@landley.net>
L: linux-doc@vger.kernel.org
T: quilt http://xenotime.net/kernel-doc-patches/current/
T: TBD
S: Maintained
F: Documentation/
@ -3587,6 +3587,7 @@ S: Supported
F: drivers/net/wireless/iwlegacy/
INTEL WIRELESS WIFI LINK (iwlwifi)
M: Johannes Berg <johannes.berg@intel.com>
M: Wey-Yi Guy <wey-yi.w.guy@intel.com>
M: Intel Linux Wireless <ilw@linux.intel.com>
L: linux-wireless@vger.kernel.org
@ -6466,6 +6467,7 @@ S: Odd Fixes
F: drivers/staging/olpc_dcon/
STAGING - OZMO DEVICES USB OVER WIFI DRIVER
M: Rupesh Gujare <rgujare@ozmodevices.com>
M: Chris Kelly <ckelly@ozmodevices.com>
S: Maintained
F: drivers/staging/ozwpan/

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 4
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*

68
arch/alpha/include/asm/atomic.h
View File

@ -3,6 +3,7 @@
#include <linux/types.h>
#include <asm/barrier.h>
#include <asm/cmpxchg.h>
/*
* Atomic operations that C can't guarantee us. Useful for
@ -168,73 +169,6 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
return result;
}
/*
* Atomic exchange routines.
*/
#define __ASM__MB
#define ____xchg(type, args...) __xchg ## type ## _local(args)
#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args)
#include <asm/xchg.h>
#define xchg_local(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \
(unsigned long)_n_, \
sizeof(*(ptr))); \
})
#define cmpxchg64_local(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg_local((ptr), (o), (n)); \
})
#ifdef CONFIG_SMP
#undef __ASM__MB
#define __ASM__MB "\tmb\n"
#endif
#undef ____xchg
#undef ____cmpxchg
#define ____xchg(type, args...) __xchg ##type(args)
#define ____cmpxchg(type, args...) __cmpxchg ##type(args)
#include <asm/xchg.h>
#define xchg(ptr,x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr)));\
})
#define cmpxchg64(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg((ptr), (o), (n)); \
})
#undef __ASM__MB
#undef ____cmpxchg
#define __HAVE_ARCH_CMPXCHG 1
#define atomic64_cmpxchg(v, old, new) (cmpxchg(&((v)->counter), old, new))
#define atomic64_xchg(v, new) (xchg(&((v)->counter), new))

71
arch/alpha/include/asm/cmpxchg.h Normal file
View File

@ -0,0 +1,71 @@
#ifndef _ALPHA_CMPXCHG_H
#define _ALPHA_CMPXCHG_H
/*
* Atomic exchange routines.
*/
#define __ASM__MB
#define ____xchg(type, args...) __xchg ## type ## _local(args)
#define ____cmpxchg(type, args...) __cmpxchg ## type ## _local(args)
#include <asm/xchg.h>
#define xchg_local(ptr, x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg_local((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg_local(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg_local((ptr), (unsigned long)_o_, \
(unsigned long)_n_, \
sizeof(*(ptr))); \
})
#define cmpxchg64_local(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg_local((ptr), (o), (n)); \
})
#ifdef CONFIG_SMP
#undef __ASM__MB
#define __ASM__MB "\tmb\n"
#endif
#undef ____xchg
#undef ____cmpxchg
#define ____xchg(type, args...) __xchg ##type(args)
#define ____cmpxchg(type, args...) __cmpxchg ##type(args)
#include <asm/xchg.h>
#define xchg(ptr, x) \
({ \
__typeof__(*(ptr)) _x_ = (x); \
(__typeof__(*(ptr))) __xchg((ptr), (unsigned long)_x_, \
sizeof(*(ptr))); \
})
#define cmpxchg(ptr, o, n) \
({ \
__typeof__(*(ptr)) _o_ = (o); \
__typeof__(*(ptr)) _n_ = (n); \
(__typeof__(*(ptr))) __cmpxchg((ptr), (unsigned long)_o_, \
(unsigned long)_n_, sizeof(*(ptr)));\
})
#define cmpxchg64(ptr, o, n) \
({ \
BUILD_BUG_ON(sizeof(*(ptr)) != 8); \
cmpxchg((ptr), (o), (n)); \
})
#undef __ASM__MB
#undef ____cmpxchg
#define __HAVE_ARCH_CMPXCHG 1
#endif /* _ALPHA_CMPXCHG_H */

4
arch/alpha/include/asm/xchg.h
View File

@ -1,10 +1,10 @@
#ifndef _ALPHA_ATOMIC_H
#ifndef _ALPHA_CMPXCHG_H
#error Do not include xchg.h directly!
#else
/*
* xchg/xchg_local and cmpxchg/cmpxchg_local share the same code
* except that local version do not have the expensive memory barrier.
* So this file is included twice from asm/system.h.
* So this file is included twice from asm/cmpxchg.h.
*/
/*

2
arch/arm/boot/compressed/atags_to_fdt.c
View File

@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space)
} else if (atag->hdr.tag == ATAG_MEM) {
if (memcount >= sizeof(mem_reg_property)/4)
continue;
if (!atag->u.mem.size)
continue;
mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
} else if (atag->hdr.tag == ATAG_INITRD2) {

2
arch/arm/boot/compressed/head.S
View File

@ -273,7 +273,7 @@ restart: adr r0, LC0
add r0, r0, #0x100
mov r1, r6
sub r2, sp, r6
blne atags_to_fdt
bleq atags_to_fdt
ldmfd sp!, {r0-r3, ip, lr}
sub sp, sp, #0x10000

1
arch/arm/boot/dts/at91sam9g20.dtsi
View File

@ -55,7 +55,6 @@
#interrupt-cells = <2>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
reg = <0xfffff000 0x200>;
};

1
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -56,7 +56,6 @@
#interrupt-cells = <2>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
reg = <0xfffff000 0x200>;
};

1
arch/arm/boot/dts/at91sam9x5.dtsi
View File

@ -54,7 +54,6 @@
#interrupt-cells = <2>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
reg = <0xfffff000 0x200>;
};

1
arch/arm/boot/dts/db8500.dtsi
View File

@ -24,7 +24,6 @@
#interrupt-cells = <3>;
#address-cells = <1>;
interrupt-controller;
interrupt-parent;
reg = <0xa0411000 0x1000>,
<0xa0410100 0x100>;
};

1
arch/arm/boot/dts/highbank.dts
View File

@ -89,7 +89,6 @@
#size-cells = <0>;
#address-cells = <1>;
interrupt-controller;
interrupt-parent;
reg = <0xfff11000 0x1000>,
<0xfff10100 0x100>;
};

9
arch/arm/common/vic.c
View File

@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
/*
* Handle each interrupt in a single VIC. Returns non-zero if we've
* handled at least one interrupt. This does a single read of the
* status register and handles all interrupts in order from LSB first.
* handled at least one interrupt. This reads the status register
* before handling each interrupt, which is necessary given that
* handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
*/
static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
{
u32 stat, irq;
int handled = 0;
stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
while (stat) {
while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
irq = ffs(stat) - 1;
handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
stat &= ~(1 << irq);
handled = 1;
}

1
arch/arm/configs/imx_v4_v5_defconfig
View File

@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_MFD_MC13XXX=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_MC13783=y
CONFIG_REGULATOR_MC13892=y
CONFIG_FB=y

9
arch/arm/configs/u8500_defconfig
View File

@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_U8500=y
CONFIG_UX500_SOC_DB5500=y
CONFIG_UX500_SOC_DB8500=y
CONFIG_MACH_HREFV60=y
CONFIG_MACH_SNOWBALL=y
CONFIG_MACH_U5500=y
@ -39,7 +37,6 @@ CONFIG_CAIF=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_MISC_DEVICES=y
CONFIG_AB8500_PWM=y
CONFIG_SENSORS_BH1780=y
CONFIG_NETDEVICES=y
@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_I2C=y
CONFIG_I2C_NOMADIK=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_GPIO_STMPE=y
CONFIG_GPIO_TC3589X=y
CONFIG_POWER_SUPPLY=y
CONFIG_AB8500_BM=y
CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
CONFIG_MFD_STMPE=y
CONFIG_MFD_TC3589X=y
CONFIG_AB5500_CORE=y
CONFIG_AB8500_CORE=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_AB8500=y
# CONFIG_HID_SUPPORT is not set
CONFIG_USB_GADGET=y

2
arch/arm/include/asm/jump_label.h
View File

@ -14,7 +14,7 @@
#define JUMP_LABEL_NOP "nop"
#endif
static __always_inline bool arch_static_branch(struct jump_label_key *key)
static __always_inline bool arch_static_branch(struct static_key *key)
{
asm goto("1:\n\t"
JUMP_LABEL_NOP "\n\t"

16
arch/arm/kernel/setup.c
View File

@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size)
*/
size -= start & ~PAGE_MASK;
bank->start = PAGE_ALIGN(start);
bank->size = size & PAGE_MASK;
#ifndef CONFIG_LPAE
if (bank->start + size < bank->start) {
printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in "
"32-bit physical address space\n", (long long)start);
/*
* To ensure bank->start + bank->size is representable in
* 32 bits, we use ULONG_MAX as the upper limit rather than 4GB.
* This means we lose a page after masking.
*/
size = ULONG_MAX - bank->start;
}
#endif
bank->size = size & PAGE_MASK;
/*
* Check whether this memory region has non-zero size or

1
arch/arm/mach-at91/at91rm9200_devices.c
View File

@ -1173,7 +1173,6 @@ void __init at91_add_device_serial(void)
printk(KERN_INFO "AT91: No default serial console defined.\n");
}
#else
void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
void __init at91_set_serial_console(unsigned portnr) {}
void __init at91_add_device_serial(void) {}

2
arch/arm/mach-at91/at91rm9200_time.c
View File

@ -23,6 +23,7 @@
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/export.h>
#include <asm/mach/time.h>
@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
};
void __iomem *at91_st_base;
EXPORT_SYMBOL_GPL(at91_st_base);
void __init at91rm9200_ioremap_st(u32 addr)
{

2
arch/arm/mach-at91/board-rm9200ek.c
View File

@ -117,7 +117,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
};
#define EK_FLASH_BASE AT91_CHIPSELECT_0
#define EK_FLASH_SIZE SZ_2M
#define EK_FLASH_SIZE SZ_8M
static struct physmap_flash_data ek_flash_data = {
.width = 2,

5
arch/arm/mach-at91/board-sam9261ek.c
View File

@ -85,8 +85,6 @@ static struct resource dm9000_resource[] = {
.flags = IORESOURCE_MEM
},
[2] = {
.start = AT91_PIN_PC11,
.end = AT91_PIN_PC11,
.flags = IORESOURCE_IRQ
| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
}
@ -130,6 +128,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
static void __init ek_add_device_dm9000(void)
{
struct resource *r = &dm9000_resource[2];
/* Configure chip-select 2 (DM9000) */
sam9_smc_configure(0, 2, &dm9000_smc_config);
@ -139,6 +139,7 @@ static void __init ek_add_device_dm9000(void)
/* Configure Interrupt pin as input, no pull-up */
at91_set_gpio_input(AT91_PIN_PC11, 0);
r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
platform_device_register(&dm9000_device);
}
#else

1
arch/arm/mach-at91/clock.c
View File

@ -35,6 +35,7 @@
#include "generic.h"
void __iomem *at91_pmc_base;
EXPORT_SYMBOL_GPL(at91_pmc_base);
/*
* There's a lot more which can be done with clocks, including cpufreq

2
arch/arm/mach-at91/include/mach/at91_pmc.h
View File

@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
#define at91_pmc_write(field, value) \
__raw_writel(value, at91_pmc_base + field)
#else
.extern at91_aic_base
.extern at91_pmc_base
#endif
#define AT91_PMC_SCER 0x00 /* System Clock Enable Register */

2
arch/arm/mach-at91/setup.c
View File

@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
}
void __iomem *at91_ramc_base[2];
EXPORT_SYMBOL_GPL(at91_ramc_base);
void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
{
@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
}
void __iomem *at91_matrix_base;
EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{

4
arch/arm/mach-bcmring/core.c
View File

@ -52,8 +52,8 @@
#include <mach/csp/chipcHw_inline.h>
#include <mach/csp/tmrHw_reg.h>
static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
static struct clk pll1_clk = {
.name = "PLL1",

2
arch/arm/mach-exynos/Kconfig
View File

@ -368,6 +368,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
depends on ARCH_EXYNOS4
select CPU_EXYNOS4210
select USE_OF
select ARM_AMBA
@ -380,6 +381,7 @@ config MACH_EXYNOS4_DT
config MACH_EXYNOS5_DT
bool "SAMSUNG EXYNOS5 Machine using device tree"
depends on ARCH_EXYNOS5
select SOC_EXYNOS5250
select USE_OF
select ARM_AMBA

2
arch/arm/mach-exynos/include/mach/irqs.h
View File

@ -212,6 +212,8 @@
#define IRQ_MFC EXYNOS4_IRQ_MFC
#define IRQ_SDO EXYNOS4_IRQ_SDO
#define IRQ_I2S0 EXYNOS4_IRQ_I2S0
#define IRQ_ADC EXYNOS4_IRQ_ADC0
#define IRQ_TC EXYNOS4_IRQ_PEN0

4
arch/arm/mach-exynos/include/mach/map.h
View File

@ -89,6 +89,10 @@
#define EXYNOS4_PA_MDMA1 0x12840000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS5_PA_MDMA0 0x10800000
#define EXYNOS5_PA_MDMA1 0x11C10000
#define EXYNOS5_PA_PDMA0 0x121A0000
#define EXYNOS5_PA_PDMA1 0x121B0000
#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000

6
arch/arm/mach-exynos/include/mach/regs-clock.h
View File

@ -255,9 +255,15 @@
/* For EXYNOS5250 */
#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000)
#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100)
#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200)
#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400)
#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500)
#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504)
#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600)
#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604)
#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100)
#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204)

2
arch/arm/mach-exynos/mach-exynos5-dt.c
View File

@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
"exynos4210-uart.3", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL),
{},
};

46
arch/arm/mach-exynos/mach-nuri.c
View File

@ -307,49 +307,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = {
};
/* TSP */
static u8 mxt_init_vals[] = {
/* MXT_GEN_COMMAND(6) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_GEN_POWER(7) */
0x20, 0xff, 0x32,
/* MXT_GEN_ACQUIRE(8) */
0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23,
/* MXT_TOUCH_MULTI(9) */
0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00,
0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00,
/* MXT_TOUCH_KEYARRAY(15) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00,
0x00,
/* MXT_SPT_GPIOPWM(19) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_PROCI_GRIPFACE(20) */
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04,
0x0f, 0x0a,
/* MXT_PROCG_NOISE(22) */
0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00,
0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03,
/* MXT_TOUCH_PROXIMITY(23) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_PROCI_ONETOUCH(24) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_SPT_SELFTEST(25) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
/* MXT_PROCI_TWOTOUCH(27) */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* MXT_SPT_CTECONFIG(28) */
0x00, 0x00, 0x02, 0x08, 0x10, 0x00,
};
static struct mxt_platform_data mxt_platform_data = {
.config = mxt_init_vals,
.config_length = ARRAY_SIZE(mxt_init_vals),
.x_line = 18,
.y_line = 11,
.x_size = 1024,
@ -571,7 +529,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = {
static struct regulator_init_data __initdata max8997_ldo8_data = {
.constraints = {
.name = "VUSB/VDAC_3.3V_C210",
.name = "VUSB+VDAC_3.3V_C210",
.min_uV = 3300000,
.max_uV = 3300000,
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
@ -1347,6 +1305,7 @@ static struct platform_device *nuri_devices[] __initdata = {
static void __init nuri_map_io(void)
{
clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
@ -1379,7 +1338,6 @@ static void __init nuri_machine_init(void)
nuri_camera_init();
nuri_ehci_init();
clk_xusbxti.rate = 24000000;
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));

2
arch/arm/mach-exynos/mach-universal_c210.c
View File

@ -29,6 +29,7 @@
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/iic.h>
@ -1057,6 +1058,7 @@ static struct platform_device *universal_devices[] __initdata = {
static void __init universal_map_io(void)
{
clk_xusbxti.rate = 24000000;
exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));

6
arch/arm/mach-imx/imx27-dt.c
View File

@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
static int __init imx27_avic_add_irq_domain(struct device_node *np,
struct device_node *interrupt_parent)
{
irq_domain_add_simple(np, 0);
irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
return 0;
}
@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np,
{
static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
irq_domain_add_simple(np, gpio_irq_base);
gpio_irq_base -= 32;
irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
NULL);
return 0;
}

2
arch/arm/mach-imx/mm-imx5.c
View File

@ -35,7 +35,7 @@ static void imx5_idle(void)
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
if (tzic_enable_wake() != 0)
if (!tzic_enable_wake())
cpu_do_idle();
clk_disable(gpc_dvfs_clk);
}

3
arch/arm/mach-msm/board-halibut.c
View File

@ -86,9 +86,6 @@ static void __init halibut_init(void)
static void __init halibut_fixup(struct tag *tags, char **cmdline,
struct meminfo *mi)
{
mi->nr_banks=1;
mi->bank[0].start = PHYS_OFFSET;
mi->bank[0].size = (101*1024*1024);
}
static void __init halibut_map_io(void)

1
arch/arm/mach-msm/board-trout-panel.c
View File

@ -12,6 +12,7 @@
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/system_info.h>
#include <mach/msm_fb.h>
#include <mach/vreg.h>

1
arch/arm/mach-msm/board-trout.c
View File

@ -19,6 +19,7 @@
#include <linux/platform_device.h>
#include <linux/clkdev.h>
#include <asm/system_info.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

2
arch/arm/mach-msm/proc_comm.c
View File

@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
* and unknown state. This function should be called early to
* wait on the ARM9.
*/
void __init proc_comm_boot_wait(void)
void __devinit proc_comm_boot_wait(void)
{
void __iomem *base = MSM_SHARED_RAM_BASE;

1
arch/arm/mach-omap1/mux.c
View File

@ -27,6 +27,7 @@
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
#include <plat/mux.h>

4
arch/arm/mach-omap1/timer.c
View File

@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
int n = (pdev->id - 1) << 1;
u32 l;
l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
__raw_writel(l, MOD_CONF_CTRL_1);
omap_writel(l, MOD_CONF_CTRL_1);
return 0;
}

12
arch/arm/mach-omap2/board-4430sdp.c
View File

@ -20,6 +20,7 @@
#include <linux/usb/otg.h>
#include <linux/spi/spi.h>
#include <linux/i2c/twl.h>
#include <linux/mfd/twl6040.h>
#include <linux/gpio_keys.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = {
},
};
static struct twl4030_codec_data twl6040_codec = {
static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = {
.hf_right_step = 0x1d,
};
static struct twl4030_vibra_data twl6040_vibra = {
static struct twl6040_vibra_data twl6040_vibra = {
.vibldrv_res = 8,
.vibrdrv_res = 3,
.viblmotor_res = 10,
@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = {
.vddvibr_uV = 0, /* fixed volt supply - VBAT */
};
static struct twl4030_audio_data twl6040_audio = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.vibra = &twl6040_vibra,
.audpwron_gpio = 127,
.naudint_irq = OMAP44XX_IRQ_SYS_2N,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
static struct twl4030_platform_data sdp4430_twldata = {
.audio = &twl6040_audio,
/* Regulators */
.vusim = &sdp4430_vusim,
.vaux1 = &sdp4430_vaux1,
@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void)
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap4_pmic_init("twl6030", &sdp4430_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
ARRAY_SIZE(sdp4430_i2c_3_boardinfo));

2
arch/arm/mach-omap2/board-generic.c
View File

@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
static void __init omap4_i2c_init(void)
{
omap4_pmic_init("twl6030", &sdp4430_twldata);
omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
}
static void __init omap4_init(void)

13
arch/arm/mach-omap2/board-omap4panda.c
View File

@ -25,6 +25,7 @@
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/i2c/twl.h>
#include <linux/mfd/twl6040.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/wl12xx.h>
@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
return 0;
}
static struct twl4030_codec_data twl6040_codec = {
static struct twl6040_codec_data twl6040_codec = {
/* single-step ramp for headset and handsfree */
.hs_left_step = 0x0f,
.hs_right_step = 0x0f,
@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = {
.hf_right_step = 0x1d,
};
static struct twl4030_audio_data twl6040_audio = {
static struct twl6040_platform_data twl6040_data = {
.codec = &twl6040_codec,
.audpwron_gpio = 127,
.naudint_irq = OMAP44XX_IRQ_SYS_2N,
.irq_base = TWL6040_CODEC_IRQ_BASE,
};
/* Panda board uses the common PMIC configuration */
static struct twl4030_platform_data omap4_panda_twldata = {
.audio = &twl6040_audio,
};
static struct twl4030_platform_data omap4_panda_twldata;
/*
* Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void)
TWL_COMMON_REGULATOR_VCXIO |
TWL_COMMON_REGULATOR_VUSB |
TWL_COMMON_REGULATOR_CLK32KG);
omap4_pmic_init("twl6030", &omap4_panda_twldata);
omap4_pmic_init("twl6030", &omap4_panda_twldata,
&twl6040_data, OMAP44XX_IRQ_SYS_2N);
omap_register_i2c_bus(2, 400, NULL, 0);
/*
* Bus 3 is attached to the DVI port where devices like the pico DLP

80
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
View File

@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate)
return 0;
}
#ifdef CONFIG_CPU_FREQ
/*
* Walk PRCM rate table and fillout cpufreq freq_table
* XXX This should be replaced by an OPP layer in the near future
*/
static struct cpufreq_frequency_table *freq_table;
void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
const struct prcm_config *prcm;
int i = 0;
int tbl_sz = 0;
if (!cpu_is_omap24xx())
return;
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sclk->rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
tbl_sz++;
}
/*
* XXX Ensure that we're doing what CPUFreq expects for this error
* case and the following one
*/
if (tbl_sz == 0) {
pr_warning("%s: no matching entries in rate_table\n",
__func__);
return;
}
/* Include the CPUFREQ_TABLE_END terminator entry */
tbl_sz++;
freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
GFP_ATOMIC);
if (!freq_table) {
pr_err("%s: could not kzalloc frequency table\n", __func__);
return;
}
for (prcm = rate_table; prcm->mpu_speed; prcm++) {
if (!(prcm->flags & cpu_mask))
continue;
if (prcm->xtal_speed != sclk->rate)
continue;
/* don't put bypass rates in table */
if (prcm->dpll_speed == prcm->xtal_speed)
continue;
freq_table[i].index = i;
freq_table[i].frequency = prcm->mpu_speed / 1000;
i++;
}
freq_table[i].index = i;
freq_table[i].frequency = CPUFREQ_TABLE_END;
*table = &freq_table[0];
}
void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
{
if (!cpu_is_omap24xx())
return;
kfree(freq_table);
}
#endif

5
arch/arm/mach-omap2/clock.c
View File

@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = {
.clk_set_rate = omap2_clk_set_rate,
.clk_set_parent = omap2_clk_set_parent,
.clk_disable_unused = omap2_clk_disable_unused,
#ifdef CONFIG_CPU_FREQ
/* These will be removed when the OPP code is integrated */
.clk_init_cpufreq_table = omap2_clk_init_cpufreq_table,
.clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table,
#endif
};

8
arch/arm/mach-omap2/clock.h
View File

@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[];
extern const struct clksel_rate gfx_l3_rates[];
extern const struct clksel_rate dsp_ick_rates[];
#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ)
extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#else
#define omap2_clk_init_cpufreq_table 0
#define omap2_clk_exit_cpufreq_table 0
#endif
extern const struct clkops clkops_omap2_iclk_dflt_wait;
extern const struct clkops clkops_omap2_iclk_dflt;
extern const struct clkops clkops_omap2_iclk_idle_only;

17
arch/arm/mach-omap2/omap_hwmod.c
View File

@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
goto dis_opt_clks;
_write_sysconfig(v, oh);
if (oh->class->sysc->srst_udelay)
udelay(oh->class->sysc->srst_udelay);
if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
omap_test_timeout((omap_hwmod_read(oh,
oh->class->sysc->syss_offs)
@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
*/
int omap_hwmod_softreset(struct omap_hwmod *oh)
{
if (!oh)
u32 v;
int ret;
if (!oh || !(oh->_sysc_cache))
return -EINVAL;
return _ocp_softreset(oh);
v = oh->_sysc_cache;
ret = _set_softreset(oh, &v);
if (ret)
goto error;
_write_sysconfig(v, oh);
error:
return ret;
}
/**

1
arch/arm/mach-omap2/omap_hwmod_2420_data.c
View File

@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
.flags = OMAP_FIREWALL_L4,
}
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

1
arch/arm/mach-omap2/omap_hwmod_2430_data.c
View File

@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
.slave = &omap2430_dss_venc_hwmod,
.clk = "dss_ick",
.addr = omap2_dss_venc_addrs,
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

1
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View File

@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
.flags = OMAP_FIREWALL_L4,
}
},
.flags = OCPIF_SWSUP_IDLE,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};

9
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View File

@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
.rev_offs = 0x0000,
.sysc_offs = 0x0010,
/*
* ISS needs 100 OCP clk cycles delay after a softreset before
* accessing sysconfig again.
* The lowest frequency at the moment for L3 bus is 100 MHz, so
* 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
*
* TODO: Indicate errata when available.
*/
.srst_udelay = 2,
.sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |

124
arch/arm/mach-omap2/serial.c
View File

@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
static void omap_uart_set_smartidle(struct platform_device *pdev)
{
struct omap_device *od = to_omap_device(pdev);
u8 idlemode;
omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
idlemode = HWMOD_IDLEMODE_SMART_WKUP;
else
idlemode = HWMOD_IDLEMODE_SMART;
omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
}
#else
@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
static struct omap_device_pad default_uart1_pads[] __initdata = {
{
.name = "uart1_cts.uart1_cts",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart1_rts.uart1_rts",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart1_tx.uart1_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart1_rx.uart1_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_uart2_pads[] __initdata = {
{
.name = "uart2_cts.uart2_cts",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart2_rts.uart2_rts",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart2_tx.uart2_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart2_rx.uart2_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_uart3_pads[] __initdata = {
{
.name = "uart3_cts_rctx.uart3_cts_rctx",
.enable = OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
},
{
.name = "uart3_rts_sd.uart3_rts_sd",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart3_tx_irtx.uart3_tx_irtx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart3_rx_irrx.uart3_rx_irrx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
},
};
static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
{
.name = "gpmc_wait2.uart4_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "gpmc_wait3.uart4_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE2,
},
};
static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
{
.name = "uart4_tx.uart4_tx",
.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
},
{
.name = "uart4_rx.uart4_rx",
.flags = OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
.enable = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
.idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0,
},
};
static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
{
switch (bdata->id) {
case 0:
bdata->pads = default_uart1_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
break;
case 1:
bdata->pads = default_uart2_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
break;
case 2:
bdata->pads = default_uart3_pads;
bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
break;
case 3:
if (cpu_is_omap44xx()) {
bdata->pads = default_omap4_uart4_pads;
bdata->pads_cnt =
ARRAY_SIZE(default_omap4_uart4_pads);
} else if (cpu_is_omap3630()) {
bdata->pads = default_omap36xx_uart4_pads;
bdata->pads_cnt =
ARRAY_SIZE(default_omap36xx_uart4_pads);
}
break;
default:
break;
}
}
#else
static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}

37
arch/arm/mach-omap2/twl-common.c
View File

@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = {
.flags = I2C_CLIENT_WAKE,
};
static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
{
.addr = 0x48,
.flags = I2C_CLIENT_WAKE,
},
{
I2C_BOARD_INFO("twl6040", 0x4b),
},
};
void __init omap_pmic_init(int bus, u32 clkrate,
const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data)
@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
void __init omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct twl6040_platform_data *twl6040_data, int twl6040_irq)
{
/* PMIC part*/
strncpy(omap4_i2c1_board_info[0].type, pmic_type,
sizeof(omap4_i2c1_board_info[0].type));
omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
omap4_i2c1_board_info[0].platform_data = pmic_data;
/* TWL6040 audio IC part */
omap4_i2c1_board_info[1].irq = twl6040_irq;
omap4_i2c1_board_info[1].platform_data = twl6040_data;
omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
}
void __init omap_pmic_late_init(void)
{
/* Init the OMAP TWL parameters (if PMIC has been registerd) */
if (!pmic_i2c_board_info.irq)
return;
omap3_twl_init();
omap4_twl_init();
if (pmic_i2c_board_info.irq)
omap3_twl_init();
if (omap4_i2c1_board_info[0].irq)
omap4_twl_init();
}
#if defined(CONFIG_ARCH_OMAP3)

10
arch/arm/mach-omap2/twl-common.h
View File

@ -29,6 +29,7 @@
struct twl4030_platform_data;
struct twl6040_platform_data;
void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
struct twl4030_platform_data *pmic_data);
@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type,
omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
}
static inline void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data)
{
/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
}
void omap4_pmic_init(const char *pmic_type,
struct twl4030_platform_data *pmic_data,
struct twl6040_platform_data *audio_data, int twl6040_irq);
void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags);

2
arch/arm/mach-s5pv210/dma.c
View File

@ -33,8 +33,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
static u64 dma_dmamask = DMA_BIT_MASK(32);
static u8 pdma0_peri[] = {
DMACH_UART0_RX,
DMACH_UART0_TX,

4
arch/arm/mach-s5pv210/mach-aquila.c
View File

@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = {
.gpio_defaults[8] = 0x0100,
.gpio_defaults[9] = 0x0100,
.gpio_defaults[10] = 0x0100,
.ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, NULL, &wm8994_ldo2_data },
.ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, &wm8994_ldo2_data },
};
/* GPIO I2C PMIC */

4
arch/arm/mach-s5pv210/mach-goni.c
View File

@ -674,8 +674,8 @@ static struct wm8994_pdata wm8994_platform_data = {
.gpio_defaults[8] = 0x0100,
.gpio_defaults[9] = 0x0100,
.gpio_defaults[10] = 0x0100,
.ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, NULL, &wm8994_ldo2_data },
.ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */
.ldo[1] = { 0, &wm8994_ldo2_data },
};
/* GPIO I2C PMIC */

1
arch/arm/mach-ux500/Kconfig
View File

@ -17,6 +17,7 @@ config UX500_SOC_DB5500
config UX500_SOC_DB8500
bool
select MFD_DB8500_PRCMU
select REGULATOR
select REGULATOR_DB8500_PRCMU
select CPU_FREQ_TABLE if CPU_FREQ

2
arch/arm/mach-ux500/platsmp.c
View File

@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
*/
write_pen_release(cpu_logical_map(cpu));
gic_raise_softirq(cpumask_of(cpu), 1);
smp_send_reschedule(cpu);
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {

2
arch/arm/mm/Kconfig
View File

@ -723,7 +723,7 @@ config CPU_HIGH_VECTOR
bool "Select the High exception vector"
help
Say Y here to select high exception vector(0xFFFF0000~).
The exception vector can be vary depending on the platform
The exception vector can vary depending on the platform
design in nommu mode. If your platform needs to select
high exception vector, say Y.
Otherwise or if you are unsure, say N, and the low exception

2
arch/arm/mm/fault.c
View File

@ -320,7 +320,7 @@ retry:
*/
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr);
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
tsk->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1,

2
arch/arm/mm/nommu.c
View File

@ -13,6 +13,7 @@
#include <asm/sections.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <asm/traps.h>
#include <asm/mach/arch.h>
#include "mm.h"
@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void)
*/
void __init paging_init(struct machine_desc *mdesc)
{
early_trap_init((void *)CONFIG_VECTORS_BASE);
bootmem_init();
}

12
arch/arm/mm/proc-v7.S
View File

@ -254,6 +254,18 @@ __v7_setup:
ldr r6, =NMRR @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
#endif
#ifndef CONFIG_ARM_THUMBEE
mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE
and r0, r0, #(0xf << 12) @ ThumbEE enabled field
teq r0, #(1 << 12) @ check if ThumbEE is present
bne 1f
mov r5, #0
mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0
mrc p14, 6, r0, c0, c0, 0 @ load TEECR
orr r0, r0, #1 @ set the 1st bit in order to
mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access
1:
#endif
adr r5, v7_crval
ldmia r5, {r5, r6}

26
arch/arm/plat-omap/clock.c
View File

@ -398,32 +398,6 @@ struct clk dummy_ck = {
.ops = &clkops_null,
};
#ifdef CONFIG_CPU_FREQ
void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
if (!arch_clock || !arch_clock->clk_init_cpufreq_table)
return;
spin_lock_irqsave(&clockfw_lock, flags);
arch_clock->clk_init_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
{
unsigned long flags;
if (!arch_clock || !arch_clock->clk_exit_cpufreq_table)
return;
spin_lock_irqsave(&clockfw_lock, flags);
arch_clock->clk_exit_cpufreq_table(table);
spin_unlock_irqrestore(&clockfw_lock, flags);
}
#endif
/*
*
*/

10
arch/arm/plat-omap/include/plat/clock.h
View File

@ -272,8 +272,6 @@ struct clk {
#endif
};
struct cpufreq_frequency_table;
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
@ -283,10 +281,6 @@ struct clk_functions {
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
#ifdef CONFIG_CPU_FREQ
void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
#endif
};
extern int mpurate;
@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
#ifdef CONFIG_CPU_FREQ
extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
#endif
extern struct clk *omap_clk_get_by_name(const char *name);
extern int omap_clk_enable_autoidle_all(void);
extern int omap_clk_disable_autoidle_all(void);

4
arch/arm/plat-omap/include/plat/omap_hwmod.h
View File

@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields {
* @rev_offs: IP block revision register offset (from module base addr)
* @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
* @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
* @srst_udelay: Delay needed after doing a softreset in usecs
* @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
* @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
* @clockact: the default value of the module CLOCKACTIVITY bits
@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig {
u16 sysc_offs;
u16 syss_offs;
u16 sysc_flags;
struct omap_hwmod_sysc_fields *sysc_fields;
u8 srst_udelay;
u8 idlemodes;
u8 clockact;
struct omap_hwmod_sysc_fields *sysc_fields;
};
/**

12
arch/arm/plat-omap/sram.c
View File

@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
sdrc_actim_ctrl_b_1, sdrc_mr_1);
}
#ifdef CONFIG_PM
void omap3_sram_restore_context(void)
{
omap_sram_ceil = omap_sram_base + omap_sram_size;
@ -358,17 +357,18 @@ void omap3_sram_restore_context(void)
omap3_sram_configure_core_dpll_sz);
omap_push_sram_idle();
}
#endif /* CONFIG_PM */
#endif /* CONFIG_ARCH_OMAP3 */
static inline int omap34xx_sram_init(void)
{
#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
omap3_sram_restore_context();
#endif
return 0;
}
#else
static inline int omap34xx_sram_init(void)
{
return 0;
}
#endif /* CONFIG_ARCH_OMAP3 */
static inline int am33xx_sram_init(void)
{

1
arch/arm/plat-samsung/Kconfig
View File

@ -302,6 +302,7 @@ comment "Power management"
config SAMSUNG_PM_DEBUG
bool "S3C2410 PM Suspend debug"
depends on PM
select DEBUG_LL
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>

148
arch/ia64/include/asm/cmpxchg.h
View File

@ -1 +1,147 @@
#include <asm/intrinsics.h>
#ifndef _ASM_IA64_CMPXCHG_H
#define _ASM_IA64_CMPXCHG_H
/*
* Compare/Exchange, forked from asm/intrinsics.h
* which was:
*
* Copyright (C) 2002-2003 Hewlett-Packard Co
* David Mosberger-Tang <davidm@hpl.hp.com>
*/
#ifndef __ASSEMBLY__
#include <linux/types.h>
/* include compiler specific intrinsics */
#include <asm/ia64regs.h>
#ifdef __INTEL_COMPILER
# include <asm/intel_intrin.h>
#else
# include <asm/gcc_intrin.h>
#endif
/*
* This function doesn't exist, so you'll get a linker error if
* something tries to do an invalid xchg().
*/
extern void ia64_xchg_called_with_bad_pointer(void);
#define __xchg(x, ptr, size) \
({ \
unsigned long __xchg_result; \
\
switch (size) { \
case 1: \
__xchg_result = ia64_xchg1((__u8 *)ptr, x); \
break; \
\
case 2: \
__xchg_result = ia64_xchg2((__u16 *)ptr, x); \
break; \
\
case 4: \
__xchg_result = ia64_xchg4((__u32 *)ptr, x); \
break; \
\
case 8: \
__xchg_result = ia64_xchg8((__u64 *)ptr, x); \
break; \
default: \
ia64_xchg_called_with_bad_pointer(); \
} \
__xchg_result; \
})
#define xchg(ptr, x) \
((__typeof__(*(ptr))) __xchg((unsigned long) (x), (ptr), sizeof(*(ptr))))
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*/
#define __HAVE_ARCH_CMPXCHG 1
/*
* This function doesn't exist, so you'll get a linker error
* if something tries to do an invalid cmpxchg().
*/
extern long ia64_cmpxchg_called_with_bad_pointer(void);
#define ia64_cmpxchg(sem, ptr, old, new, size) \
({ \
__u64 _o_, _r_; \
\
switch (size) { \
case 1: \
_o_ = (__u8) (long) (old); \
break; \
case 2: \
_o_ = (__u16) (long) (old); \
break; \
case 4: \
_o_ = (__u32) (long) (old); \
break; \
case 8: \
_o_ = (__u64) (long) (old); \
break; \
default: \
break; \
} \
switch (size) { \
case 1: \
_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \
break; \
\
case 2: \
_r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \
break; \
\
case 4: \
_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \
break; \
\
case 8: \
_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \
break; \
\
default: \
_r_ = ia64_cmpxchg_called_with_bad_pointer(); \
break; \
} \
(__typeof__(old)) _r_; \
})
#define cmpxchg_acq(ptr, o, n) \
ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
#define cmpxchg_rel(ptr, o, n) \
ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
/* for compatibility with other platforms: */
#define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n))
#define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n))
#define cmpxchg_local cmpxchg
#define cmpxchg64_local cmpxchg64
#ifdef CONFIG_IA64_DEBUG_CMPXCHG
# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128;
# define CMPXCHG_BUGCHECK(v) \
do { \
if (_cmpxchg_bugcheck_count-- <= 0) { \
void *ip; \
extern int printk(const char *fmt, ...); \
ip = (void *) ia64_getreg(_IA64_REG_IP); \
printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v));\
break; \
} \
} while (0)
#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
# define CMPXCHG_BUGCHECK_DECL
# define CMPXCHG_BUGCHECK(v)
#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_IA64_CMPXCHG_H */

9
arch/ia64/include/asm/futex.h
View File

@ -106,15 +106,16 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
return -EFAULT;
{
register unsigned long r8 __asm ("r8") = 0;
register unsigned long r8 __asm ("r8");
unsigned long prev;
__asm__ __volatile__(
" mf;; \n"
" mov ar.ccv=%3;; \n"
"[1:] cmpxchg4.acq %0=[%1],%2,ar.ccv \n"
" mov %0=r0 \n"
" mov ar.ccv=%4;; \n"
"[1:] cmpxchg4.acq %1=[%2],%3,ar.ccv \n"
" .xdata4 \"__ex_table\", 1b-., 2f-. \n"
"[2:]"
: "=r" (prev)
: "=r" (r8), "=r" (prev)
: "r" (uaddr), "r" (newval),
"rO" ((long) (unsigned) oldval)
: "memory");

114
arch/ia64/include/asm/intrinsics.h
View File

@ -18,6 +18,7 @@
#else
# include <asm/gcc_intrin.h>
#endif
#include <asm/cmpxchg.h>
#define ia64_native_get_psr_i() (ia64_native_getreg(_IA64_REG_PSR) & IA64_PSR_I)
@ -81,119 +82,6 @@ extern unsigned long __bad_increment_for_ia64_fetch_and_add (void);
#define ia64_fetch_and_add(i,v) (ia64_fetchadd(i, v, rel) + (i)) /* return new value */
/*
* This function doesn't exist, so you'll get a linker error if
* something tries to do an invalid xchg().
*/
extern void ia64_xchg_called_with_bad_pointer (void);
#define __xchg(x,ptr,size) \
({ \
unsigned long __xchg_result; \
\
switch (size) { \
case 1: \
__xchg_result = ia64_xchg1((__u8 *)ptr, x); \
break; \
\
case 2: \
__xchg_result = ia64_xchg2((__u16 *)ptr, x); \
break; \
\
case 4: \
__xchg_result = ia64_xchg4((__u32 *)ptr, x); \
break; \
\
case 8: \
__xchg_result = ia64_xchg8((__u64 *)ptr, x); \
break; \
default: \
ia64_xchg_called_with_bad_pointer(); \
} \
__xchg_result; \
})
#define xchg(ptr,x) \
((__typeof__(*(ptr))) __xchg ((unsigned long) (x), (ptr), sizeof(*(ptr))))
/*
* Atomic compare and exchange. Compare OLD with MEM, if identical,
* store NEW in MEM. Return the initial value in MEM. Success is
* indicated by comparing RETURN with OLD.
*/
#define __HAVE_ARCH_CMPXCHG 1
/*
* This function doesn't exist, so you'll get a linker error
* if something tries to do an invalid cmpxchg().
*/
extern long ia64_cmpxchg_called_with_bad_pointer (void);
#define ia64_cmpxchg(sem,ptr,old,new,size) \
({ \
__u64 _o_, _r_; \
\
switch (size) { \
case 1: _o_ = (__u8 ) (long) (old); break; \
case 2: _o_ = (__u16) (long) (old); break; \
case 4: _o_ = (__u32) (long) (old); break; \
case 8: _o_ = (__u64) (long) (old); break; \
default: break; \
} \
switch (size) { \
case 1: \
_r_ = ia64_cmpxchg1_##sem((__u8 *) ptr, new, _o_); \
break; \
\
case 2: \
_r_ = ia64_cmpxchg2_##sem((__u16 *) ptr, new, _o_); \
break; \
\
case 4: \
_r_ = ia64_cmpxchg4_##sem((__u32 *) ptr, new, _o_); \
break; \
\
case 8: \
_r_ = ia64_cmpxchg8_##sem((__u64 *) ptr, new, _o_); \
break; \
\
default: \
_r_ = ia64_cmpxchg_called_with_bad_pointer(); \
break; \
} \
(__typeof__(old)) _r_; \
})
#define cmpxchg_acq(ptr, o, n) \
ia64_cmpxchg(acq, (ptr), (o), (n), sizeof(*(ptr)))
#define cmpxchg_rel(ptr, o, n) \
ia64_cmpxchg(rel, (ptr), (o), (n), sizeof(*(ptr)))
/* for compatibility with other platforms: */
#define cmpxchg(ptr, o, n) cmpxchg_acq((ptr), (o), (n))
#define cmpxchg64(ptr, o, n) cmpxchg_acq((ptr), (o), (n))
#define cmpxchg_local cmpxchg
#define cmpxchg64_local cmpxchg64
#ifdef CONFIG_IA64_DEBUG_CMPXCHG
# define CMPXCHG_BUGCHECK_DECL int _cmpxchg_bugcheck_count = 128;
# define CMPXCHG_BUGCHECK(v) \
do { \
if (_cmpxchg_bugcheck_count-- <= 0) { \
void *ip; \
extern int printk(const char *fmt, ...); \
ip = (void *) ia64_getreg(_IA64_REG_IP); \
printk("CMPXCHG_BUGCHECK: stuck at %p on word %p\n", ip, (v)); \
break; \
} \
} while (0)
#else /* !CONFIG_IA64_DEBUG_CMPXCHG */
# define CMPXCHG_BUGCHECK_DECL
# define CMPXCHG_BUGCHECK(v)
#endif /* !CONFIG_IA64_DEBUG_CMPXCHG */
#endif
#ifdef __KERNEL__

18
arch/ia64/kernel/perfmon.c
View File

@ -604,12 +604,6 @@ pfm_unprotect_ctx_ctxsw(pfm_context_t *x, unsigned long f)
spin_unlock(&(x)->ctx_lock);
}
static inline unsigned int
pfm_do_munmap(struct mm_struct *mm, unsigned long addr, size_t len, int acct)
{
return do_munmap(mm, addr, len);
}
static inline unsigned long
pfm_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len, unsigned long pgoff, unsigned long flags, unsigned long exec)
{
@ -1458,8 +1452,9 @@ pfm_unreserve_session(pfm_context_t *ctx, int is_syswide, unsigned int cpu)
* a PROTECT_CTX() section.
*/
static int
pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long size)
pfm_remove_smpl_mapping(void *vaddr, unsigned long size)
{
struct task_struct *task = current;
int r;
/* sanity checks */
@ -1473,13 +1468,8 @@ pfm_remove_smpl_mapping(struct task_struct *task, void *vaddr, unsigned long siz
/*
* does the actual unmapping
*/
down_write(&task->mm->mmap_sem);
r = vm_munmap((unsigned long)vaddr, size);
DPRINT(("down_write done smpl_vaddr=%p size=%lu\n", vaddr, size));
r = pfm_do_munmap(task->mm, (unsigned long)vaddr, size, 0);
up_write(&task->mm->mmap_sem);
if (r !=0) {
printk(KERN_ERR "perfmon: [%d] unable to unmap sampling buffer @%p size=%lu\n", task_pid_nr(task), vaddr, size);
}
@ -1945,7 +1935,7 @@ pfm_flush(struct file *filp, fl_owner_t id)
* because some VM function reenables interrupts.
*
*/
if (smpl_buf_vaddr) pfm_remove_smpl_mapping(current, smpl_buf_vaddr, smpl_buf_size);
if (smpl_buf_vaddr) pfm_remove_smpl_mapping(smpl_buf_vaddr, smpl_buf_size);
return 0;
}

1
arch/m68k/configs/m5275evb_defconfig
View File

@ -49,7 +49,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_FEC=y
CONFIG_FEC2=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_PPP=y

2
arch/m68k/platform/527x/config.c
View File

@ -74,9 +74,7 @@ static void __init m527x_fec_init(void)
writew(par | 0xf00, MCF_IPSBAR + 0x100082);
v = readb(MCF_IPSBAR + 0x100078);
writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
#endif
#ifdef CONFIG_FEC2
/* Set multi-function pins to ethernet mode for fec1 */
par = readw(MCF_IPSBAR + 0x100082);
writew(par | 0xa0, MCF_IPSBAR + 0x100082);

6
arch/m68k/platform/68EZ328/Makefile
View File

@ -3,9 +3,3 @@
#
obj-y := config.o
extra-y := bootlogo.rh
$(obj)/bootlogo.rh: $(src)/bootlogo.h
perl $(src)/../68328/bootlogo.pl < $(src)/bootlogo.h \
> $(obj)/bootlogo.rh

9
arch/m68k/platform/68VZ328/Makefile
View File

@ -3,14 +3,9 @@
#
obj-y := config.o
logo-$(UCDIMM) := bootlogo.rh
logo-$(DRAGEN2) := screen.h
extra-y := $(logo-y)
$(obj)/bootlogo.rh: $(src)/../68EZ328/bootlogo.h
perl $(src)/bootlogo.pl < $(src)/../68328/bootlogo.h > $(obj)/bootlogo.rh
extra-$(DRAGEN2):= screen.h
$(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl
perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h
clean-files := $(obj)/screen.h $(obj)/bootlogo.rh
clean-files := $(obj)/screen.h

2
arch/m68k/platform/68EZ328/bootlogo.h → arch/m68k/platform/68VZ328/bootlogo.h
View File

@ -1,6 +1,6 @@
#define splash_width 640
#define splash_height 480
static unsigned char splash_bits[] = {
unsigned char __attribute__ ((aligned(16))) bootlogo_bits[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,

2
arch/m68k/platform/coldfire/device.c
View File

@ -114,7 +114,7 @@ static struct resource mcf_fec1_resources[] = {
static struct platform_device mcf_fec1 = {
.name = "fec",
.id = 0,
.id = 1,
.num_resources = ARRAY_SIZE(mcf_fec1_resources),
.resource = mcf_fec1_resources,
};

43
arch/powerpc/boot/dts/fsl/pq3-mpic-message-B.dtsi Normal file
View File

@ -0,0 +1,43 @@
/*
* PQ3 MPIC Message (Group B) device tree stub [ controller @ offset 0x42400 ]
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
message@42400 {
compatible = "fsl,mpic-v3.1-msgr";
reg = <0x42400 0x200>;
interrupts = <
0xb4 2 0 0
0xb5 2 0 0
0xb6 2 0 0
0xb7 2 0 0>;
};

10
arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi
View File

@ -53,6 +53,16 @@ timer@41100 {
3 0 3 0>;
};
message@41400 {
compatible = "fsl,mpic-v3.1-msgr";
reg = <0x41400 0x200>;
interrupts = <
0xb0 2 0 0
0xb1 2 0 0
0xb2 2 0 0
0xb3 2 0 0>;
};
msi@41600 {
compatible = "fsl,mpic-msi";
reg = <0x41600 0x80>;

18
arch/powerpc/include/asm/mpic.h
View File

@ -275,9 +275,6 @@ struct mpic
unsigned int isu_mask;
/* Number of sources */
unsigned int num_sources;
/* default senses array */
unsigned char *senses;
unsigned int senses_count;
/* vector numbers used for internal sources (ipi/timers) */
unsigned int ipi_vecs[4];
@ -415,21 +412,6 @@ extern struct mpic *mpic_alloc(struct device_node *node,
extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
phys_addr_t phys_addr);
/* Set default sense codes
*
* @mpic: controller
* @senses: array of sense codes
* @count: size of above array
*
* Optionally provide an array (indexed on hardware interrupt numbers
* for this MPIC) of default sense codes for the chip. Those are linux
* sense codes IRQ_TYPE_*
*
* The driver gets ownership of the pointer, don't dispose of it or
* anything like that. __init only.
*/
extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);
/* Initialize the controller. After this has been called, none of the above
* should be called again for this mpic

1
arch/powerpc/include/asm/mpic_msgr.h
View File

@ -13,6 +13,7 @@
#include <linux/types.h>
#include <linux/spinlock.h>
#include <asm/smp.h>
struct mpic_msgr {
u32 __iomem *base;

5
arch/powerpc/include/asm/reg_booke.h
View File

@ -15,11 +15,6 @@
#ifndef __ASM_POWERPC_REG_BOOKE_H__
#define __ASM_POWERPC_REG_BOOKE_H__
#ifdef CONFIG_BOOKE_WDT
extern u32 booke_wdt_enabled;
extern u32 booke_wdt_period;
#endif /* CONFIG_BOOKE_WDT */
/* Machine State Register (MSR) Fields */
#define MSR_GS (1<<28) /* Guest state */
#define MSR_UCLE (1<<26) /* User-mode cache lock enable */

3
arch/powerpc/kernel/setup_32.c
View File

@ -150,6 +150,9 @@ notrace void __init machine_init(u64 dt_ptr)
}
#ifdef CONFIG_BOOKE_WDT
extern u32 booke_wdt_enabled;
extern u32 booke_wdt_period;
/* Checks wdt=x and wdt_period=xx command-line option */
notrace int __init early_parse_wdt(char *p)
{

6
arch/powerpc/platforms/85xx/common.c
View File

@ -21,6 +21,12 @@ static struct of_device_id __initdata mpc85xx_common_ids[] = {
{ .compatible = "fsl,qe", },
{ .compatible = "fsl,cpm2", },
{ .compatible = "fsl,srio", },
/* So that the DMA channel nodes can be probed individually: */
{ .compatible = "fsl,eloplus-dma", },
/* For the PMC driver */
{ .compatible = "fsl,mpc8548-guts", },
/* Probably unnecessary? */
{ .compatible = "gpio-leds", },
{},
};

11
arch/powerpc/platforms/85xx/mpc85xx_mds.c
View File

@ -399,12 +399,6 @@ static int __init board_fixups(void)
machine_arch_initcall(mpc8568_mds, board_fixups);
machine_arch_initcall(mpc8569_mds, board_fixups);
static struct of_device_id mpc85xx_ids[] = {
{ .compatible = "fsl,mpc8548-guts", },
{ .compatible = "gpio-leds", },
{},
};
static int __init mpc85xx_publish_devices(void)
{
if (machine_is(mpc8568_mds))
@ -412,10 +406,7 @@ static int __init mpc85xx_publish_devices(void)
if (machine_is(mpc8569_mds))
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
mpc85xx_common_publish_devices();
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
return 0;
return mpc85xx_common_publish_devices();
}
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);

13
arch/powerpc/platforms/85xx/p1022_ds.c
View File

@ -460,18 +460,7 @@ static void __init p1022_ds_setup_arch(void)
pr_info("Freescale P1022 DS reference board\n");
}
static struct of_device_id __initdata p1022_ds_ids[] = {
/* So that the DMA channel nodes can be probed individually: */
{ .compatible = "fsl,eloplus-dma", },
{},
};
static int __init p1022_ds_publish_devices(void)
{
mpc85xx_common_publish_devices();
return of_platform_bus_probe(NULL, p1022_ds_ids, NULL);
}
machine_device_initcall(p1022_ds, p1022_ds_publish_devices);
machine_device_initcall(p1022_ds, mpc85xx_common_publish_devices);
machine_arch_initcall(p1022_ds, swiotlb_setup_bus_notifier);

9
arch/powerpc/platforms/powermac/low_i2c.c
View File

@ -366,11 +366,20 @@ static void kw_i2c_timeout(unsigned long data)
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
/*
* If the timer is pending, that means we raced with the
* irq, in which case we just return
*/
if (timer_pending(&host->timeout_timer))
goto skip;
kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
if (host->state != state_idle) {
host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
add_timer(&host->timeout_timer);
}
skip:
spin_unlock_irqrestore(&host->lock, flags);
}

2
arch/powerpc/platforms/pseries/eeh.c
View File

@ -1076,7 +1076,7 @@ static void eeh_add_device_late(struct pci_dev *dev)
pr_debug("EEH: Adding device %s\n", pci_name(dev));
dn = pci_device_to_OF_node(dev);
edev = pci_dev_to_eeh_dev(dev);
edev = of_node_to_eeh_dev(dn);
if (edev->pdev == dev) {
pr_debug("EEH: Already referenced !\n");
return;

56
arch/powerpc/sysdev/mpic.c
View File

@ -604,18 +604,14 @@ static struct mpic *mpic_find(unsigned int irq)
}
/* Determine if the linux irq is an IPI */
static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int irq)
static unsigned int mpic_is_ipi(struct mpic *mpic, unsigned int src)
{
unsigned int src = virq_to_hw(irq);
return (src >= mpic->ipi_vecs[0] && src <= mpic->ipi_vecs[3]);
}
/* Determine if the linux irq is a timer */
static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int irq)
static unsigned int mpic_is_tm(struct mpic *mpic, unsigned int src)
{
unsigned int src = virq_to_hw(irq);
return (src >= mpic->timer_vecs[0] && src <= mpic->timer_vecs[7]);
}
@ -876,21 +872,45 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type)
if (src >= mpic->num_sources)
return -EINVAL;
if (flow_type == IRQ_TYPE_NONE)
if (mpic->senses && src < mpic->senses_count)
flow_type = mpic->senses[src];
if (flow_type == IRQ_TYPE_NONE)
flow_type = IRQ_TYPE_LEVEL_LOW;
vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
/* We don't support "none" type */
if (flow_type == IRQ_TYPE_NONE)
flow_type = IRQ_TYPE_DEFAULT;
/* Default: read HW settings */
if (flow_type == IRQ_TYPE_DEFAULT) {
switch(vold & (MPIC_INFO(VECPRI_POLARITY_MASK) |
MPIC_INFO(VECPRI_SENSE_MASK))) {
case MPIC_INFO(VECPRI_SENSE_EDGE) |
MPIC_INFO(VECPRI_POLARITY_POSITIVE):
flow_type = IRQ_TYPE_EDGE_RISING;
break;
case MPIC_INFO(VECPRI_SENSE_EDGE) |
MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
flow_type = IRQ_TYPE_EDGE_FALLING;
break;
case MPIC_INFO(VECPRI_SENSE_LEVEL) |
MPIC_INFO(VECPRI_POLARITY_POSITIVE):
flow_type = IRQ_TYPE_LEVEL_HIGH;
break;
case MPIC_INFO(VECPRI_SENSE_LEVEL) |
MPIC_INFO(VECPRI_POLARITY_NEGATIVE):
flow_type = IRQ_TYPE_LEVEL_LOW;
break;
}
}
/* Apply to irq desc */
irqd_set_trigger_type(d, flow_type);
/* Apply to HW */
if (mpic_is_ht_interrupt(mpic, src))
vecpri = MPIC_VECPRI_POLARITY_POSITIVE |
MPIC_VECPRI_SENSE_EDGE;
else
vecpri = mpic_type_to_vecpri(mpic, flow_type);
vold = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
vnew = vold & ~(MPIC_INFO(VECPRI_POLARITY_MASK) |
MPIC_INFO(VECPRI_SENSE_MASK));
vnew |= vecpri;
@ -1026,7 +1046,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq,
irq_set_chip_and_handler(virq, chip, handle_fasteoi_irq);
/* Set default irq type */
irq_set_irq_type(virq, IRQ_TYPE_NONE);
irq_set_irq_type(virq, IRQ_TYPE_DEFAULT);
/* If the MPIC was reset, then all vectors have already been
* initialized. Otherwise, a per source lazy initialization
@ -1417,12 +1437,6 @@ void __init mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,
mpic->num_sources = isu_first + mpic->isu_size;
}
void __init mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count)
{
mpic->senses = senses;
mpic->senses_count = count;
}
void __init mpic_init(struct mpic *mpic)
{
int i, cpu;
@ -1555,12 +1569,12 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri)
return;
raw_spin_lock_irqsave(&mpic_lock, flags);
if (mpic_is_ipi(mpic, irq)) {
if (mpic_is_ipi(mpic, src)) {
reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
~MPIC_VECPRI_PRIORITY_MASK;
mpic_ipi_write(src - mpic->ipi_vecs[0],
reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT));
} else if (mpic_is_tm(mpic, irq)) {
} else if (mpic_is_tm(mpic, src)) {
reg = mpic_tm_read(src - mpic->timer_vecs[0]) &
~MPIC_VECPRI_PRIORITY_MASK;
mpic_tm_write(src - mpic->timer_vecs[0],

12
arch/powerpc/sysdev/mpic_msgr.c
View File

@ -27,6 +27,7 @@
static struct mpic_msgr **mpic_msgrs;
static unsigned int mpic_msgr_count;
static DEFINE_RAW_SPINLOCK(msgrs_lock);
static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value)
{
@ -56,12 +57,11 @@ struct mpic_msgr *mpic_msgr_get(unsigned int reg_num)
if (reg_num >= mpic_msgr_count)
return ERR_PTR(-ENODEV);
raw_spin_lock_irqsave(&msgr->lock, flags);
if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) {
msgr = mpic_msgrs[reg_num];
raw_spin_lock_irqsave(&msgrs_lock, flags);
msgr = mpic_msgrs[reg_num];
if (msgr->in_use == MSGR_FREE)
msgr->in_use = MSGR_INUSE;
}
raw_spin_unlock_irqrestore(&msgr->lock, flags);
raw_spin_unlock_irqrestore(&msgrs_lock, flags);
return msgr;
}
@ -228,7 +228,7 @@ static __devinit int mpic_msgr_probe(struct platform_device *dev)
reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i;
msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE;
msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET;
msgr->mer = (u32 *)((u8 *)msgr->base + MPIC_MSGR_MER_OFFSET);
msgr->in_use = MSGR_FREE;
msgr->num = i;
raw_spin_lock_init(&msgr->lock);

Some files were not shown because too many files have changed in this diff Show More