Fixes for omaps that would be good to get in before v3.15-rc1.
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.15 (GNU/Linux) iQIcBAABAgAGBQJTIihTAAoJEBvUPslcq6VzWPsQALe5kmAboudO0wPOtP5FH40o N6SJTtMsStr7w7KiSTMXGVJJKzw7HPlBqMM41YQn/K6CKfbp5D3ddNFQ7KsWk3ZG qB4dAEBoyagbas94CTxdd9zfOqm8LHVPf2Qol+9tuKYQDxhRNl4zfKh94FLK1Xg4 8d8JpW8VpgxYbHZTQ2NfK9kqb7REbB4mn/VXudqucLgzaHu4SKglu3yLX8MBIO5w wv89571SFxuVVE4Lg2/OOw52ieHU8zf7/aJBuNpcklmg1Q1SC3pdbjHTrPJHlpun 1++tsqfarw9EZG954aEqvpsujsIasN25ptpUT6n80Y0hJOagGoHL1DJlBNlmQdu6 tOMBUIO3ASeoDIHWV8apBW04zWgm1L/hQTL0G85uo2NKG869QWzN4ADdFI4Hx/WH qp2MSdTWCnbGQwUBHhkRZgTiWJEU3912hLFRqrcqFcEUSRnDw+sDAfGFusPTS/+s ZnYPV62NlhtcXMk1Oo+6+YqkpF6A2tRw08AUiuoLg/qGTN8nUyem/PWYffm/KzdS HA5RlTud0KjcIhwUWF7jNTSfTsP/x8Fp8AtCOpMd920asXDHYe8G6v6n7QMy4DaX U9JCEpmQacBl8aRYLUBLemdVw0YCT4wTyuN75fjmPYycXdnxFCRZl8D3kKxrQWWV pngpx8EB0X+/KwGXqU/o =NkqH -----END PGP SIGNATURE----- Merge tag 'omap-for-v3.15/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical Merge "omap fixes for v3.15 merge window" from Tony Lindgren: Fixes for omaps that would be good to get in before v3.15-rc1. * tag 'omap-for-v3.15/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP4: hwmod data: correct the idlemodes for spinlock ARM: dts: am33xx: correcting dt node unit address for usb ARM: dts: omap4/5: Use l3_ick for the gpmc node CLK: TI: OMAP4/5/DRA7: Remove gpmc_fck from dummy clocks ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUM ARM: OMAP2+: INTC: Acknowledge stuck active interrupts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
f18651eb2c
|
|
@ -92,3 +92,6 @@ extra_certificates
|
|||
signing_key.priv
|
||||
signing_key.x509
|
||||
x509.genkey
|
||||
|
||||
# Kconfig presets
|
||||
all.config
|
||||
|
|
|
|||
|
|
@ -29,6 +29,8 @@ DMA-ISA-LPC.txt
|
|||
- How to do DMA with ISA (and LPC) devices.
|
||||
DMA-attributes.txt
|
||||
- listing of the various possible attributes a DMA region can have
|
||||
dmatest.txt
|
||||
- how to compile, configure and use the dmatest system.
|
||||
DocBook/
|
||||
- directory with DocBook templates etc. for kernel documentation.
|
||||
EDID/
|
||||
|
|
@ -77,6 +79,8 @@ arm/
|
|||
- directory with info about Linux on the ARM architecture.
|
||||
arm64/
|
||||
- directory with info about Linux on the 64 bit ARM architecture.
|
||||
assoc_array.txt
|
||||
- generic associative array intro.
|
||||
atomic_ops.txt
|
||||
- semantics and behavior of atomic and bitmask operations.
|
||||
auxdisplay/
|
||||
|
|
@ -87,6 +91,8 @@ bad_memory.txt
|
|||
- how to use kernel parameters to exclude bad RAM regions.
|
||||
basic_profiling.txt
|
||||
- basic instructions for those who wants to profile Linux kernel.
|
||||
bcache.txt
|
||||
- Block-layer cache on fast SSDs to improve slow (raid) I/O performance.
|
||||
binfmt_misc.txt
|
||||
- info on the kernel support for extra binary formats.
|
||||
blackfin/
|
||||
|
|
@ -171,6 +177,8 @@ early-userspace/
|
|||
- info about initramfs, klibc, and userspace early during boot.
|
||||
edac.txt
|
||||
- information on EDAC - Error Detection And Correction
|
||||
efi-stub.txt
|
||||
- How to use the EFI boot stub to bypass GRUB or elilo on EFI systems.
|
||||
eisa.txt
|
||||
- info on EISA bus support.
|
||||
email-clients.txt
|
||||
|
|
@ -195,8 +203,8 @@ futex-requeue-pi.txt
|
|||
- info on requeueing of tasks from a non-PI futex to a PI futex
|
||||
gcov.txt
|
||||
- use of GCC's coverage testing tool "gcov" with the Linux kernel
|
||||
gpio.txt
|
||||
- overview of GPIO (General Purpose Input/Output) access conventions.
|
||||
gpio/
|
||||
- gpio related documentation
|
||||
hid/
|
||||
- directory with information on human interface devices
|
||||
highuid.txt
|
||||
|
|
@ -255,6 +263,8 @@ kernel-docs.txt
|
|||
- listing of various WWW + books that document kernel internals.
|
||||
kernel-parameters.txt
|
||||
- summary listing of command line / boot prompt args for the kernel.
|
||||
kernel-per-CPU-kthreads.txt
|
||||
- List of all per-CPU kthreads and how they introduce jitter.
|
||||
kmemcheck.txt
|
||||
- info on dynamic checker that detects uses of uninitialized memory.
|
||||
kmemleak.txt
|
||||
|
|
@ -299,8 +309,6 @@ memory-devices/
|
|||
- directory with info on parts like the Texas Instruments EMIF driver
|
||||
memory-hotplug.txt
|
||||
- Hotpluggable memory support, how to use and current status.
|
||||
memory.txt
|
||||
- info on typical Linux memory problems.
|
||||
metag/
|
||||
- directory with info about Linux on Meta architecture.
|
||||
mips/
|
||||
|
|
@ -311,6 +319,8 @@ mmc/
|
|||
- directory with info about the MMC subsystem
|
||||
mn10300/
|
||||
- directory with info about the mn10300 architecture port
|
||||
module-signing.txt
|
||||
- Kernel module signing for increased security when loading modules.
|
||||
mtd/
|
||||
- directory with info about memory technology devices (flash)
|
||||
mono.txt
|
||||
|
|
@ -343,6 +353,8 @@ pcmcia/
|
|||
- info on the Linux PCMCIA driver.
|
||||
percpu-rw-semaphore.txt
|
||||
- RCU based read-write semaphore optimized for locking for reading
|
||||
phy.txt
|
||||
- Description of the generic PHY framework.
|
||||
pi-futex.txt
|
||||
- documentation on lightweight priority inheritance futexes.
|
||||
pinctrl.txt
|
||||
|
|
@ -431,6 +443,8 @@ sysrq.txt
|
|||
- info on the magic SysRq key.
|
||||
target/
|
||||
- directory with info on generating TCM v4 fabric .ko modules
|
||||
this_cpu_ops.txt
|
||||
- List rationale behind and the way to use this_cpu operations.
|
||||
thermal/
|
||||
- directory with information on managing thermal issues (CPU/temp)
|
||||
trace/
|
||||
|
|
@ -469,6 +483,8 @@ wimax/
|
|||
- directory with info about Intel Wireless Wimax Connections
|
||||
workqueue.txt
|
||||
- information on the Concurrency Managed Workqueue implementation
|
||||
ww-mutex-design.txt
|
||||
- Intro to Mutex wait/would deadlock handling.s
|
||||
x86/x86_64/
|
||||
- directory with info on Linux support for AMD x86-64 (Hammer) machines.
|
||||
xtensa/
|
||||
|
|
|
|||
|
|
@ -82,7 +82,19 @@ Most of the hard work is done for the driver in the PCI layer. It simply
|
|||
has to request that the PCI layer set up the MSI capability for this
|
||||
device.
|
||||
|
||||
4.2.1 pci_enable_msi_range
|
||||
4.2.1 pci_enable_msi
|
||||
|
||||
int pci_enable_msi(struct pci_dev *dev)
|
||||
|
||||
A successful call allocates ONE interrupt to the device, regardless
|
||||
of how many MSIs the device supports. The device is switched from
|
||||
pin-based interrupt mode to MSI mode. The dev->irq number is changed
|
||||
to a new number which represents the message signaled interrupt;
|
||||
consequently, this function should be called before the driver calls
|
||||
request_irq(), because an MSI is delivered via a vector that is
|
||||
different from the vector of a pin-based interrupt.
|
||||
|
||||
4.2.2 pci_enable_msi_range
|
||||
|
||||
int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
|
||||
|
||||
|
|
@ -147,6 +159,11 @@ static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
|
|||
return pci_enable_msi_range(pdev, nvec, nvec);
|
||||
}
|
||||
|
||||
Note, unlike pci_enable_msi_exact() function, which could be also used to
|
||||
enable a particular number of MSI-X interrupts, pci_enable_msi_range()
|
||||
returns either a negative errno or 'nvec' (not negative errno or 0 - as
|
||||
pci_enable_msi_exact() does).
|
||||
|
||||
4.2.1.3 Single MSI mode
|
||||
|
||||
The most notorious example of the request type described above is
|
||||
|
|
@ -158,7 +175,27 @@ static int foo_driver_enable_single_msi(struct pci_dev *pdev)
|
|||
return pci_enable_msi_range(pdev, 1, 1);
|
||||
}
|
||||
|
||||
4.2.2 pci_disable_msi
|
||||
Note, unlike pci_enable_msi() function, which could be also used to
|
||||
enable the single MSI mode, pci_enable_msi_range() returns either a
|
||||
negative errno or 1 (not negative errno or 0 - as pci_enable_msi()
|
||||
does).
|
||||
|
||||
4.2.3 pci_enable_msi_exact
|
||||
|
||||
int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
|
||||
|
||||
This variation on pci_enable_msi_range() call allows a device driver to
|
||||
request exactly 'nvec' MSIs.
|
||||
|
||||
If this function returns a negative number, it indicates an error and
|
||||
the driver should not attempt to request any more MSI interrupts for
|
||||
this device.
|
||||
|
||||
By contrast with pci_enable_msi_range() function, pci_enable_msi_exact()
|
||||
returns zero in case of success, which indicates MSI interrupts have been
|
||||
successfully allocated.
|
||||
|
||||
4.2.4 pci_disable_msi
|
||||
|
||||
void pci_disable_msi(struct pci_dev *dev)
|
||||
|
||||
|
|
@ -172,7 +209,7 @@ on any interrupt for which it previously called request_irq().
|
|||
Failure to do so results in a BUG_ON(), leaving the device with
|
||||
MSI enabled and thus leaking its vector.
|
||||
|
||||
4.2.3 pci_msi_vec_count
|
||||
4.2.4 pci_msi_vec_count
|
||||
|
||||
int pci_msi_vec_count(struct pci_dev *dev)
|
||||
|
||||
|
|
@ -257,8 +294,8 @@ possible, likely up to the limit returned by pci_msix_vec_count() function:
|
|||
|
||||
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
|
||||
{
|
||||
return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
|
||||
1, nvec);
|
||||
return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
|
||||
1, nvec);
|
||||
}
|
||||
|
||||
Note the value of 'minvec' parameter is 1. As 'minvec' is inclusive,
|
||||
|
|
@ -269,8 +306,8 @@ In this case the function could look like this:
|
|||
|
||||
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
|
||||
{
|
||||
return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
|
||||
FOO_DRIVER_MINIMUM_NVEC, nvec);
|
||||
return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
|
||||
FOO_DRIVER_MINIMUM_NVEC, nvec);
|
||||
}
|
||||
|
||||
4.3.1.2 Exact number of MSI-X interrupts
|
||||
|
|
@ -282,10 +319,15 @@ parameters:
|
|||
|
||||
static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
|
||||
{
|
||||
return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
|
||||
nvec, nvec);
|
||||
return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
|
||||
nvec, nvec);
|
||||
}
|
||||
|
||||
Note, unlike pci_enable_msix_exact() function, which could be also used to
|
||||
enable a particular number of MSI-X interrupts, pci_enable_msix_range()
|
||||
returns either a negative errno or 'nvec' (not negative errno or 0 - as
|
||||
pci_enable_msix_exact() does).
|
||||
|
||||
4.3.1.3 Specific requirements to the number of MSI-X interrupts
|
||||
|
||||
As noted above, there could be devices that can not operate with just any
|
||||
|
|
@ -332,7 +374,64 @@ Note how pci_enable_msix_range() return value is analized for a fallback -
|
|||
any error code other than -ENOSPC indicates a fatal error and should not
|
||||
be retried.
|
||||
|
||||
4.3.2 pci_disable_msix
|
||||
4.3.2 pci_enable_msix_exact
|
||||
|
||||
int pci_enable_msix_exact(struct pci_dev *dev,
|
||||
struct msix_entry *entries, int nvec)
|
||||
|
||||
This variation on pci_enable_msix_range() call allows a device driver to
|
||||
request exactly 'nvec' MSI-Xs.
|
||||
|
||||
If this function returns a negative number, it indicates an error and
|
||||
the driver should not attempt to allocate any more MSI-X interrupts for
|
||||
this device.
|
||||
|
||||
By contrast with pci_enable_msix_range() function, pci_enable_msix_exact()
|
||||
returns zero in case of success, which indicates MSI-X interrupts have been
|
||||
successfully allocated.
|
||||
|
||||
Another version of a routine that enables MSI-X mode for a device with
|
||||
specific requirements described in chapter 4.3.1.3 might look like this:
|
||||
|
||||
/*
|
||||
* Assume 'minvec' and 'maxvec' are non-zero
|
||||
*/
|
||||
static int foo_driver_enable_msix(struct foo_adapter *adapter,
|
||||
int minvec, int maxvec)
|
||||
{
|
||||
int rc;
|
||||
|
||||
minvec = roundup_pow_of_two(minvec);
|
||||
maxvec = rounddown_pow_of_two(maxvec);
|
||||
|
||||
if (minvec > maxvec)
|
||||
return -ERANGE;
|
||||
|
||||
retry:
|
||||
rc = pci_enable_msix_exact(adapter->pdev,
|
||||
adapter->msix_entries, maxvec);
|
||||
|
||||
/*
|
||||
* -ENOSPC is the only error code allowed to be analyzed
|
||||
*/
|
||||
if (rc == -ENOSPC) {
|
||||
if (maxvec == 1)
|
||||
return -ENOSPC;
|
||||
|
||||
maxvec /= 2;
|
||||
|
||||
if (minvec > maxvec)
|
||||
return -ENOSPC;
|
||||
|
||||
goto retry;
|
||||
} else if (rc < 0) {
|
||||
return rc;
|
||||
}
|
||||
|
||||
return maxvec;
|
||||
}
|
||||
|
||||
4.3.3 pci_disable_msix
|
||||
|
||||
void pci_disable_msix(struct pci_dev *dev)
|
||||
|
||||
|
|
|
|||
|
|
@ -8,6 +8,8 @@ listRCU.txt
|
|||
- Using RCU to Protect Read-Mostly Linked Lists
|
||||
lockdep.txt
|
||||
- RCU and lockdep checking
|
||||
lockdep-splat.txt
|
||||
- RCU Lockdep splats explained.
|
||||
NMI-RCU.txt
|
||||
- Using RCU to Protect Dynamic NMI Handlers
|
||||
rcubarrier.txt
|
||||
|
|
|
|||
|
|
@ -4,6 +4,8 @@ Booting
|
|||
- requirements for booting
|
||||
Interrupts
|
||||
- ARM Interrupt subsystem documentation
|
||||
IXP4xx
|
||||
- Intel IXP4xx Network processor.
|
||||
msm
|
||||
- MSM specific documentation
|
||||
Netwinder
|
||||
|
|
@ -24,8 +26,16 @@ SPEAr
|
|||
- ST SPEAr platform Linux Overview
|
||||
VFP/
|
||||
- Release notes for Linux Kernel Vector Floating Point support code
|
||||
cluster-pm-race-avoidance.txt
|
||||
- Algorithm for CPU and Cluster setup/teardown
|
||||
empeg/
|
||||
- Ltd's Empeg MP3 Car Audio Player
|
||||
firmware.txt
|
||||
- Secure firmware registration and calling.
|
||||
kernel_mode_neon.txt
|
||||
- How to use NEON instructions in kernel mode
|
||||
kernel_user_helpers.txt
|
||||
- Helper functions in kernel space made available for userspace.
|
||||
mem_alignment
|
||||
- alignment abort handler documentation
|
||||
memory.txt
|
||||
|
|
@ -34,3 +44,7 @@ nwfpe/
|
|||
- NWFPE floating point emulator documentation
|
||||
swp_emulation
|
||||
- SWP/SWPB emulation handler/logging description
|
||||
tcm.txt
|
||||
- ARM Tightly Coupled Memory
|
||||
vlocks.txt
|
||||
- Voting locks, low-level mechanism relying on memory system atomic writes.
|
||||
|
|
|
|||
|
|
@ -1,8 +1,10 @@
|
|||
00-INDEX
|
||||
- This file
|
||||
|
||||
Makefile
|
||||
- Makefile for gptimers example file.
|
||||
bfin-gpio-notes.txt
|
||||
- Notes in developing/using bfin-gpio driver.
|
||||
|
||||
bfin-spi-notes.txt
|
||||
- Notes for using bfin spi bus driver.
|
||||
gptimers-example.c
|
||||
- gptimers example
|
||||
|
|
|
|||
|
|
@ -14,6 +14,8 @@ deadline-iosched.txt
|
|||
- Deadline IO scheduler tunables
|
||||
ioprio.txt
|
||||
- Block io priorities (in CFQ scheduler)
|
||||
null_blk.txt
|
||||
- Null block for block-layer benchmarking.
|
||||
queue-sysfs.txt
|
||||
- Queue's sysfs entries
|
||||
request.txt
|
||||
|
|
|
|||
|
|
@ -8,3 +8,5 @@ https://lists.ozlabs.org/listinfo/devicetree-discuss
|
|||
- this file
|
||||
booting-without-of.txt
|
||||
- Booting Linux without Open Firmware, describes history and format of device trees.
|
||||
usage-model.txt
|
||||
- How Linux uses DT and what DT aims to solve.
|
||||
|
|
@ -91,7 +91,7 @@ Boards:
|
|||
compatible = "ti,omap3-beagle", "ti,omap3"
|
||||
|
||||
- OMAP3 Tobi with Overo : Commercial expansion board with daughter board
|
||||
compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
|
||||
compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
|
||||
|
||||
- OMAP4 SDP : Software Development Board
|
||||
compatible = "ti,omap4-sdp", "ti,omap4430"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,18 @@
|
|||
TI-NSPIRE interrupt controller
|
||||
|
||||
Required properties:
|
||||
- compatible: Compatible property value should be "lsi,zevio-intc".
|
||||
|
||||
- reg: Physical base address of the controller and length of memory mapped
|
||||
region.
|
||||
|
||||
- interrupt-controller : Identifies the node as an interrupt controller
|
||||
|
||||
Example:
|
||||
|
||||
interrupt-controller {
|
||||
compatible = "lsi,zevio-intc";
|
||||
interrupt-controller;
|
||||
reg = <0xDC000000 0x1000>;
|
||||
#interrupt-cells = <1>;
|
||||
};
|
||||
|
|
@ -13,6 +13,9 @@ Required properties:
|
|||
- #address-cells: should be one. The cell is the slot id.
|
||||
- #size-cells: should be zero.
|
||||
- at least one slot node
|
||||
- clock-names: tuple listing input clock names.
|
||||
Required elements: "mci_clk"
|
||||
- clocks: phandles to input clocks.
|
||||
|
||||
The node contains child nodes for each slot that the platform uses
|
||||
|
||||
|
|
@ -24,6 +27,8 @@ mmc0: mmc@f0008000 {
|
|||
interrupts = <12 4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clock-names = "mci_clk";
|
||||
clocks = <&mci0_clk>;
|
||||
|
||||
[ child node definitions...]
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,7 +1,8 @@
|
|||
* Allwinner EMAC ethernet controller
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "allwinner,sun4i-emac".
|
||||
- compatible: should be "allwinner,sun4i-a10-emac" (Deprecated:
|
||||
"allwinner,sun4i-emac")
|
||||
- reg: address and length of the register set for the device.
|
||||
- interrupts: interrupt for the device
|
||||
- phy: A phandle to a phy node defining the PHY address (as the reg
|
||||
|
|
@ -14,7 +15,7 @@ Optional properties:
|
|||
Example:
|
||||
|
||||
emac: ethernet@01c0b000 {
|
||||
compatible = "allwinner,sun4i-emac";
|
||||
compatible = "allwinner,sun4i-a10-emac";
|
||||
reg = <0x01c0b000 0x1000>;
|
||||
interrupts = <55>;
|
||||
clocks = <&ahb_gates 17>;
|
||||
|
|
|
|||
|
|
@ -1,7 +1,8 @@
|
|||
* Allwinner A10 MDIO Ethernet Controller interface
|
||||
|
||||
Required properties:
|
||||
- compatible: should be "allwinner,sun4i-mdio".
|
||||
- compatible: should be "allwinner,sun4i-a10-mdio"
|
||||
(Deprecated: "allwinner,sun4i-mdio").
|
||||
- reg: address and length of the register set for the device.
|
||||
|
||||
Optional properties:
|
||||
|
|
@ -9,7 +10,7 @@ Optional properties:
|
|||
|
||||
Example at the SoC level:
|
||||
mdio@01c0b080 {
|
||||
compatible = "allwinner,sun4i-mdio";
|
||||
compatible = "allwinner,sun4i-a10-mdio";
|
||||
reg = <0x01c0b080 0x14>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,58 @@
|
|||
STMicroelectronics SoC DWMAC glue layer controller
|
||||
|
||||
The device node has following properties.
|
||||
|
||||
Required properties:
|
||||
- compatible : Can be "st,stih415-dwmac", "st,stih416-dwmac" or
|
||||
"st,stid127-dwmac".
|
||||
- reg : Offset of the glue configuration register map in system
|
||||
configuration regmap pointed by st,syscon property and size.
|
||||
|
||||
- reg-names : Should be "sti-ethconf".
|
||||
|
||||
- st,syscon : Should be phandle to system configuration node which
|
||||
encompases this glue registers.
|
||||
|
||||
- st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be
|
||||
wired up in from different sources. One via TXCLK pin and other via CLK_125
|
||||
pin. This wiring is totally board dependent. However the retiming glue
|
||||
logic should be configured accordingly. Possible values for this property
|
||||
|
||||
"txclk" - if 125Mhz clock is wired up via txclk line.
|
||||
"clk_125" - if 125Mhz clock is wired up via clk_125 line.
|
||||
|
||||
This property is only valid for Giga bit setup( GMII, RGMII), and it is
|
||||
un-used for non-giga bit (MII and RMII) setups. Also note that internal
|
||||
clockgen can not generate stable 125Mhz clock.
|
||||
|
||||
- st,ext-phyclk: This boolean property indicates who is generating the clock
|
||||
for tx and rx. This property is only valid for RMII case where the clock can
|
||||
be generated from the MAC or PHY.
|
||||
|
||||
- clock-names: should be "sti-ethclk".
|
||||
- clocks: Should point to ethernet clockgen which can generate phyclk.
|
||||
|
||||
|
||||
Example:
|
||||
|
||||
ethernet0: dwmac@fe810000 {
|
||||
device_type = "network";
|
||||
compatible = "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
|
||||
reg = <0xfe810000 0x8000>, <0x8bc 0x4>;
|
||||
reg-names = "stmmaceth", "sti-ethconf";
|
||||
interrupts = <0 133 0>, <0 134 0>, <0 135 0>;
|
||||
interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
|
||||
phy-mode = "mii";
|
||||
|
||||
st,syscon = <&syscfg_rear>;
|
||||
|
||||
snps,pbl = <32>;
|
||||
snps,mixed-burst;
|
||||
|
||||
resets = <&softreset STIH416_ETH0_SOFTRESET>;
|
||||
reset-names = "stmmaceth";
|
||||
pinctrl-0 = <&pinctrl_mii0>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&CLK_S_GMAC0_PHY>;
|
||||
clock-names = "stmmaceth";
|
||||
};
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
Binding for TI bq2415x Li-Ion Charger
|
||||
|
||||
Required properties:
|
||||
- compatible: Should contain one of the following:
|
||||
* "ti,bq24150"
|
||||
* "ti,bq24150"
|
||||
* "ti,bq24150a"
|
||||
* "ti,bq24151"
|
||||
* "ti,bq24151a"
|
||||
* "ti,bq24152"
|
||||
* "ti,bq24153"
|
||||
* "ti,bq24153a"
|
||||
* "ti,bq24155"
|
||||
* "ti,bq24156"
|
||||
* "ti,bq24156a"
|
||||
* "ti,bq24158"
|
||||
- reg: integer, i2c address of the device.
|
||||
- ti,current-limit: integer, initial maximum current charger can pull
|
||||
from power supply in mA.
|
||||
- ti,weak-battery-voltage: integer, weak battery voltage threshold in mV.
|
||||
The chip will use slow precharge if battery voltage
|
||||
is below this value.
|
||||
- ti,battery-regulation-voltage: integer, maximum charging voltage in mV.
|
||||
- ti,charge-current: integer, maximum charging current in mA.
|
||||
- ti,termination-current: integer, charge will be terminated when current in
|
||||
constant-voltage phase drops below this value (in mA).
|
||||
- ti,resistor-sense: integer, value of sensing resistor in milliohm.
|
||||
|
||||
Optional properties:
|
||||
- ti,usb-charger-detection: phandle to usb charger detection device.
|
||||
(required for auto mode)
|
||||
|
||||
Example from Nokia N900:
|
||||
|
||||
bq24150a {
|
||||
compatible = "ti,bq24150a";
|
||||
reg = <0x6b>;
|
||||
|
||||
ti,current-limit = <100>;
|
||||
ti,weak-battery-voltage = <3400>;
|
||||
ti,battery-regulation-voltage = <4200>;
|
||||
ti,charge-current = <650>;
|
||||
ti,termination-current = <100>;
|
||||
ti,resistor-sense = <68>;
|
||||
|
||||
ti,usb-charger-detection = <&isp1704>;
|
||||
};
|
||||
|
|
@ -5,6 +5,9 @@ Required properties:
|
|||
- reg: Address and length of the register set for the device
|
||||
- interrupts: Should contain spi interrupt
|
||||
- cs-gpios: chipselects
|
||||
- clock-names: tuple listing input clock names.
|
||||
Required elements: "spi_clk"
|
||||
- clocks: phandles to input clocks.
|
||||
|
||||
Example:
|
||||
|
||||
|
|
@ -14,6 +17,8 @@ spi1: spi@fffcc000 {
|
|||
interrupts = <13 4 5>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&spi1_clk>;
|
||||
clock-names = "spi_clk";
|
||||
cs-gpios = <&pioB 3 0>;
|
||||
status = "okay";
|
||||
|
||||
|
|
|
|||
|
|
@ -8,6 +8,7 @@ ad Avionic Design GmbH
|
|||
adi Analog Devices, Inc.
|
||||
aeroflexgaisler Aeroflex Gaisler AB
|
||||
ak Asahi Kasei Corp.
|
||||
allwinner Allwinner Technology Co., Ltd.
|
||||
altr Altera Corp.
|
||||
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
|
||||
amstaos AMS-Taos Inc.
|
||||
|
|
@ -40,6 +41,7 @@ gmt Global Mixed-mode Technology, Inc.
|
|||
gumstix Gumstix, Inc.
|
||||
haoyu Haoyu Microelectronic Co. Ltd.
|
||||
hisilicon Hisilicon Limited.
|
||||
honeywell Honeywell
|
||||
hp Hewlett Packard
|
||||
ibm International Business Machines (IBM)
|
||||
idt Integrated Device Technologies, Inc.
|
||||
|
|
@ -55,6 +57,7 @@ maxim Maxim Integrated Products
|
|||
microchip Microchip Technology Inc.
|
||||
mosaixtech Mosaix Technologies, Inc.
|
||||
national National Semiconductor
|
||||
neonode Neonode Inc.
|
||||
nintendo Nintendo
|
||||
nvidia NVIDIA
|
||||
nxp NXP Semiconductors
|
||||
|
|
@ -64,7 +67,7 @@ phytec PHYTEC Messtechnik GmbH
|
|||
picochip Picochip Ltd
|
||||
powervr PowerVR (deprecated, use img)
|
||||
qca Qualcomm Atheros, Inc.
|
||||
qcom Qualcomm, Inc.
|
||||
qcom Qualcomm Technologies, Inc
|
||||
ralink Mediatek/Ralink Technology Corp.
|
||||
ramtron Ramtron International
|
||||
realtek Realtek Semiconductor Corp.
|
||||
|
|
@ -78,6 +81,7 @@ silabs Silicon Laboratories
|
|||
simtek
|
||||
sirf SiRF Technology, Inc.
|
||||
snps Synopsys, Inc.
|
||||
spansion Spansion Inc.
|
||||
st STMicroelectronics
|
||||
ste ST-Ericsson
|
||||
stericsson ST-Ericsson
|
||||
|
|
|
|||
|
|
@ -78,7 +78,7 @@ Peter Beutner <p.beutner@gmx.net>
|
|||
Wilson Michaels <wilsonmichaels@earthlink.net>
|
||||
for the lgdt330x frontend driver, and various bugfixes
|
||||
|
||||
Michael Krufky <mkrufky@m1k.net>
|
||||
Michael Krufky <mkrufky@linuxtv.org>
|
||||
for maintaining v4l/dvb inter-tree dependencies
|
||||
|
||||
Taylor Jacob <rtjacob@earthlink.net>
|
||||
|
|
|
|||
|
|
@ -5,6 +5,8 @@ please mail me.
|
|||
|
||||
00-INDEX
|
||||
- this file.
|
||||
api.txt
|
||||
- The frame buffer API between applications and buffer devices.
|
||||
arkfb.txt
|
||||
- info on the fbdev driver for ARK Logic chips.
|
||||
aty128fb.txt
|
||||
|
|
@ -51,12 +53,16 @@ sh7760fb.txt
|
|||
- info on the SH7760/SH7763 integrated LCDC Framebuffer driver.
|
||||
sisfb.txt
|
||||
- info on the framebuffer device driver for various SiS chips.
|
||||
sm501.txt
|
||||
- info on the framebuffer device driver for sm501 videoframebuffer.
|
||||
sstfb.txt
|
||||
- info on the frame buffer driver for 3dfx' Voodoo Graphics boards.
|
||||
tgafb.txt
|
||||
- info on the TGA (DECChip 21030) frame buffer driver.
|
||||
tridentfb.txt
|
||||
info on the framebuffer driver for some Trident chip based cards.
|
||||
udlfb.txt
|
||||
- Driver for DisplayLink USB 2.0 chips.
|
||||
uvesafb.txt
|
||||
- info on the userspace VESA (VBE2+ compliant) frame buffer device.
|
||||
vesafb.txt
|
||||
|
|
|
|||
|
|
@ -2,6 +2,8 @@
|
|||
- this file (info on some of the filesystems supported by linux).
|
||||
Locking
|
||||
- info on locking rules as they pertain to Linux VFS.
|
||||
Makefile
|
||||
- Makefile for building the filsystems-part of DocBook.
|
||||
9p.txt
|
||||
- 9p (v9fs) is an implementation of the Plan 9 remote fs protocol.
|
||||
adfs.txt
|
||||
|
|
|
|||
|
|
@ -12,6 +12,8 @@ nfs41-server.txt
|
|||
- info on the Linux server implementation of NFSv4 minor version 1.
|
||||
nfs-rdma.txt
|
||||
- how to install and setup the Linux NFS/RDMA client and server software
|
||||
nfsd-admin-interfaces.txt
|
||||
- Administrative interfaces for nfsd.
|
||||
nfsroot.txt
|
||||
- short guide on setting up a diskless box with NFS root filesystem.
|
||||
pnfs.txt
|
||||
|
|
@ -20,5 +22,5 @@ rpc-cache.txt
|
|||
- introduction to the caching mechanisms in the sunrpc layer.
|
||||
idmapper.txt
|
||||
- information for configuring request-keys to be used by idmapper
|
||||
knfsd-rpcgss.txt
|
||||
rpc-server-gss.txt
|
||||
- Information on GSS authentication support in the NFS Server
|
||||
|
|
|
|||
|
|
@ -8,8 +8,8 @@ reason, the kernel code must instantiate I2C devices explicitly. There are
|
|||
several ways to achieve this, depending on the context and requirements.
|
||||
|
||||
|
||||
Method 1: Declare the I2C devices by bus number
|
||||
-----------------------------------------------
|
||||
Method 1a: Declare the I2C devices by bus number
|
||||
------------------------------------------------
|
||||
|
||||
This method is appropriate when the I2C bus is a system bus as is the case
|
||||
for many embedded systems. On such systems, each I2C bus has a number
|
||||
|
|
@ -51,6 +51,43 @@ The devices will be automatically unbound and destroyed when the I2C bus
|
|||
they sit on goes away (if ever.)
|
||||
|
||||
|
||||
Method 1b: Declare the I2C devices via devicetree
|
||||
-------------------------------------------------
|
||||
|
||||
This method has the same implications as method 1a. The declaration of I2C
|
||||
devices is here done via devicetree as subnodes of the master controller.
|
||||
|
||||
Example:
|
||||
|
||||
i2c1: i2c@400a0000 {
|
||||
/* ... master properties skipped ... */
|
||||
clock-frequency = <100000>;
|
||||
|
||||
flash@50 {
|
||||
compatible = "atmel,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
|
||||
pca9532: gpio@60 {
|
||||
compatible = "nxp,pca9532";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x60>;
|
||||
};
|
||||
};
|
||||
|
||||
Here, two devices are attached to the bus using a speed of 100kHz. For
|
||||
additional properties which might be needed to set up the device, please refer
|
||||
to its devicetree documentation in Documentation/devicetree/bindings/.
|
||||
|
||||
|
||||
Method 1c: Declare the I2C devices via ACPI
|
||||
-------------------------------------------
|
||||
|
||||
ACPI can also describe I2C devices. There is special documentation for this
|
||||
which is currently located at Documentation/acpi/enumeration.txt.
|
||||
|
||||
|
||||
Method 2: Instantiate the devices explicitly
|
||||
--------------------------------------------
|
||||
|
||||
|
|
|
|||
|
|
@ -10,3 +10,5 @@ ide-tape.txt
|
|||
- info on the IDE ATAPI streaming tape driver
|
||||
ide.txt
|
||||
- important info for users of ATA devices (IDE/EIDE disks and CD-ROMS).
|
||||
warm-plug-howto.txt
|
||||
- using sysfs to remove and add IDE devices.
|
||||
|
|
@ -1726,16 +1726,16 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
|
|||
option description.
|
||||
|
||||
memmap=nn[KMG]@ss[KMG]
|
||||
[KNL] Force usage of a specific region of memory
|
||||
Region of memory to be used, from ss to ss+nn.
|
||||
[KNL] Force usage of a specific region of memory.
|
||||
Region of memory to be used is from ss to ss+nn.
|
||||
|
||||
memmap=nn[KMG]#ss[KMG]
|
||||
[KNL,ACPI] Mark specific memory as ACPI data.
|
||||
Region of memory to be used, from ss to ss+nn.
|
||||
Region of memory to be marked is from ss to ss+nn.
|
||||
|
||||
memmap=nn[KMG]$ss[KMG]
|
||||
[KNL,ACPI] Mark specific memory as reserved.
|
||||
Region of memory to be used, from ss to ss+nn.
|
||||
Region of memory to be reserved is from ss to ss+nn.
|
||||
Example: Exclude memory from 0x18690000-0x1869ffff
|
||||
memmap=64K$0x18690000
|
||||
or
|
||||
|
|
|
|||
|
|
@ -1,13 +1,15 @@
|
|||
00-INDEX
|
||||
- This file
|
||||
acer-wmi.txt
|
||||
- information on the Acer Laptop WMI Extras driver.
|
||||
Makefile
|
||||
- Makefile for building dslm example program.
|
||||
asus-laptop.txt
|
||||
- information on the Asus Laptop Extras driver.
|
||||
disk-shock-protection.txt
|
||||
- information on hard disk shock protection.
|
||||
dslm.c
|
||||
- Simple Disk Sleep Monitor program
|
||||
hpfall.c
|
||||
- (HP) laptop accelerometer program for disk protection.
|
||||
laptop-mode.txt
|
||||
- how to conserve battery power using laptop-mode.
|
||||
sony-laptop.txt
|
||||
|
|
|
|||
|
|
@ -1,3 +1,7 @@
|
|||
00-INDEX
|
||||
- This file
|
||||
leds-blinkm.txt
|
||||
- Driver for BlinkM LED-devices.
|
||||
leds-class.txt
|
||||
- documents LED handling under Linux.
|
||||
leds-lp3944.txt
|
||||
|
|
@ -12,3 +16,7 @@ leds-lp55xx.txt
|
|||
- description about lp55xx common driver.
|
||||
leds-lm3556.txt
|
||||
- notes on how to use the leds-lm3556 driver.
|
||||
ledtrig-oneshot.txt
|
||||
- One-shot LED trigger for both sporadic and dense events.
|
||||
ledtrig-transient.txt
|
||||
- LED Transient Trigger, one shot timer activation.
|
||||
|
|
|
|||
|
|
@ -1,5 +1,7 @@
|
|||
00-INDEX
|
||||
- this file
|
||||
README.buddha
|
||||
- Amiga Buddha and Catweasel IDE Driver
|
||||
kernel-options.txt
|
||||
- command line options for Linux/m68k
|
||||
|
||||
|
|
|
|||
|
|
@ -6,8 +6,14 @@
|
|||
- information on the 3Com Etherlink III Series Ethernet cards.
|
||||
6pack.txt
|
||||
- info on the 6pack protocol, an alternative to KISS for AX.25
|
||||
DLINK.txt
|
||||
- info on the D-Link DE-600/DE-620 parallel port pocket adapters
|
||||
LICENSE.qla3xxx
|
||||
- GPLv2 for QLogic Linux Networking HBA Driver
|
||||
LICENSE.qlge
|
||||
- GPLv2 for QLogic Linux qlge NIC Driver
|
||||
LICENSE.qlcnic
|
||||
- GPLv2 for QLogic Linux qlcnic NIC Driver
|
||||
Makefile
|
||||
- Makefile for docsrc.
|
||||
PLIP.txt
|
||||
- PLIP: The Parallel Line Internet Protocol device driver
|
||||
README.ipw2100
|
||||
|
|
@ -17,7 +23,7 @@ README.ipw2200
|
|||
README.sb1000
|
||||
- info on General Instrument/NextLevel SURFboard1000 cable modem.
|
||||
alias.txt
|
||||
- info on using alias network devices
|
||||
- info on using alias network devices.
|
||||
arcnet-hardware.txt
|
||||
- tons of info on ARCnet, hubs, jumper settings for ARCnet cards, etc.
|
||||
arcnet.txt
|
||||
|
|
@ -80,7 +86,7 @@ framerelay.txt
|
|||
- info on using Frame Relay/Data Link Connection Identifier (DLCI).
|
||||
gen_stats.txt
|
||||
- Generic networking statistics for netlink users.
|
||||
generic_hdlc.txt
|
||||
generic-hdlc.txt
|
||||
- The generic High Level Data Link Control (HDLC) layer.
|
||||
generic_netlink.txt
|
||||
- info on Generic Netlink
|
||||
|
|
@ -88,6 +94,8 @@ gianfar.txt
|
|||
- Gianfar Ethernet Driver.
|
||||
i40e.txt
|
||||
- README for the Intel Ethernet Controller XL710 Driver (i40e).
|
||||
i40evf.txt
|
||||
- Short note on the Driver for the Intel(R) XL710 X710 Virtual Function
|
||||
ieee802154.txt
|
||||
- Linux IEEE 802.15.4 implementation, API and drivers
|
||||
igb.txt
|
||||
|
|
@ -102,6 +110,8 @@ ipddp.txt
|
|||
- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
|
||||
iphase.txt
|
||||
- Interphase PCI ATM (i)Chip IA Linux driver info.
|
||||
ipsec.txt
|
||||
- Note on not compressing IPSec payload and resulting failed policy check.
|
||||
ipv6.txt
|
||||
- Options to the ipv6 kernel module.
|
||||
ipvs-sysctl.txt
|
||||
|
|
@ -120,6 +130,8 @@ lapb-module.txt
|
|||
- programming information of the LAPB module.
|
||||
ltpc.txt
|
||||
- the Apple or Farallon LocalTalk PC card driver
|
||||
mac80211-auth-assoc-deauth.txt
|
||||
- authentication and association / deauth-disassoc with max80211
|
||||
mac80211-injection.txt
|
||||
- HOWTO use packet injection with mac80211
|
||||
multiqueue.txt
|
||||
|
|
@ -134,6 +146,10 @@ netdevices.txt
|
|||
- info on network device driver functions exported to the kernel.
|
||||
netif-msg.txt
|
||||
- Design of the network interface message level setting (NETIF_MSG_*).
|
||||
netlink_mmap.txt
|
||||
- memory mapped I/O with netlink
|
||||
nf_conntrack-sysctl.txt
|
||||
- list of netfilter-sysctl knobs.
|
||||
nfc.txt
|
||||
- The Linux Near Field Communication (NFS) subsystem.
|
||||
openvswitch.txt
|
||||
|
|
@ -176,7 +192,7 @@ skfp.txt
|
|||
- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
|
||||
smc9.txt
|
||||
- the driver for SMC's 9000 series of Ethernet cards
|
||||
spider-net.txt
|
||||
spider_net.txt
|
||||
- README for the Spidernet Driver (as found in PS3 / Cell BE).
|
||||
stmmac.txt
|
||||
- README for the STMicro Synopsys Ethernet driver.
|
||||
|
|
@ -188,6 +204,8 @@ tcp.txt
|
|||
- short blurb on how TCP output takes place.
|
||||
tcp-thin.txt
|
||||
- kernel tuning options for low rate 'thin' TCP streams.
|
||||
team.txt
|
||||
- pointer to information for ethernet teaming devices.
|
||||
tlan.txt
|
||||
- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
|
||||
tproxy.txt
|
||||
|
|
@ -200,6 +218,8 @@ vortex.txt
|
|||
- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
|
||||
vxge.txt
|
||||
- README for the Neterion X3100 PCIe Server Adapter.
|
||||
vxlan.txt
|
||||
- Virtual extensible LAN overview
|
||||
x25.txt
|
||||
- general info on X.25 development.
|
||||
x25-iface.txt
|
||||
|
|
|
|||
|
|
@ -1,45 +0,0 @@
|
|||
The 3Com Etherlink Plus (3c505) driver.
|
||||
|
||||
This driver now uses DMA. There is currently no support for PIO operation.
|
||||
The default DMA channel is 6; this is _not_ autoprobed, so you must
|
||||
make sure you configure it correctly. If loading the driver as a
|
||||
module, you can do this with "modprobe 3c505 dma=n". If the driver is
|
||||
linked statically into the kernel, you must either use an "ether="
|
||||
statement on the command line, or change the definition of ELP_DMA in 3c505.h.
|
||||
|
||||
The driver will warn you if it has to fall back on the compiled in
|
||||
default DMA channel.
|
||||
|
||||
If no base address is given at boot time, the driver will autoprobe
|
||||
ports 0x300, 0x280 and 0x310 (in that order). If no IRQ is given, the driver
|
||||
will try to probe for it.
|
||||
|
||||
The driver can be used as a loadable module.
|
||||
|
||||
Theoretically, one instance of the driver can now run multiple cards,
|
||||
in the standard way (when loading a module, say "modprobe 3c505
|
||||
io=0x300,0x340 irq=10,11 dma=6,7" or whatever). I have not tested
|
||||
this, though.
|
||||
|
||||
The driver may now support revision 2 hardware; the dependency on
|
||||
being able to read the host control register has been removed. This
|
||||
is also untested, since I don't have a suitable card.
|
||||
|
||||
Known problems:
|
||||
I still see "DMA upload timed out" messages from time to time. These
|
||||
seem to be fairly non-fatal though.
|
||||
The card is old and slow.
|
||||
|
||||
To do:
|
||||
Improve probe/setup code
|
||||
Test multicast and promiscuous operation
|
||||
|
||||
Authors:
|
||||
The driver is mainly written by Craig Southeren, email
|
||||
<craigs@ineluki.apana.org.au>.
|
||||
Parts of the driver (adapting the driver to 1.1.4+ kernels,
|
||||
IRQ/address detection, some changes) and this README by
|
||||
Juha Laiho <jlaiho@ichaos.nullnet.fi>.
|
||||
DMA mode, more fixes, etc, by Philip Blundell <pjb27@cam.ac.uk>
|
||||
Multicard support, Software configurable DMA, etc., by
|
||||
Christopher Collins <ccollins@pcug.org.au>
|
||||
|
|
@ -75,14 +75,26 @@ Before the controller can make use of the PHY, it has to get a reference to
|
|||
it. This framework provides the following APIs to get a reference to the PHY.
|
||||
|
||||
struct phy *phy_get(struct device *dev, const char *string);
|
||||
struct phy *phy_optional_get(struct device *dev, const char *string);
|
||||
struct phy *devm_phy_get(struct device *dev, const char *string);
|
||||
struct phy *devm_phy_optional_get(struct device *dev, const char *string);
|
||||
|
||||
phy_get and devm_phy_get can be used to get the PHY. In the case of dt boot,
|
||||
the string arguments should contain the phy name as given in the dt data and
|
||||
in the case of non-dt boot, it should contain the label of the PHY.
|
||||
The only difference between the two APIs is that devm_phy_get associates the
|
||||
device with the PHY using devres on successful PHY get. On driver detach,
|
||||
release function is invoked on the the devres data and devres data is freed.
|
||||
phy_get, phy_optional_get, devm_phy_get and devm_phy_optional_get can
|
||||
be used to get the PHY. In the case of dt boot, the string arguments
|
||||
should contain the phy name as given in the dt data and in the case of
|
||||
non-dt boot, it should contain the label of the PHY. The two
|
||||
devm_phy_get associates the device with the PHY using devres on
|
||||
successful PHY get. On driver detach, release function is invoked on
|
||||
the the devres data and devres data is freed. phy_optional_get and
|
||||
devm_phy_optional_get should be used when the phy is optional. These
|
||||
two functions will never return -ENODEV, but instead returns NULL when
|
||||
the phy cannot be found.
|
||||
|
||||
It should be noted that NULL is a valid phy reference. All phy
|
||||
consumer calls on the NULL phy become NOPs. That is the release calls,
|
||||
the phy_init() and phy_exit() calls, and phy_power_on() and
|
||||
phy_power_off() calls are all NOP when applied to a NULL phy. The NULL
|
||||
phy is useful in devices for handling optional phy devices.
|
||||
|
||||
5. Releasing a reference to the PHY
|
||||
|
||||
|
|
|
|||
|
|
@ -4,6 +4,8 @@ apm-acpi.txt
|
|||
- basic info about the APM and ACPI support.
|
||||
basic-pm-debugging.txt
|
||||
- Debugging suspend and resume
|
||||
charger-manager.txt
|
||||
- Battery charger management.
|
||||
devices.txt
|
||||
- How drivers interact with system-wide power management
|
||||
drivers-testing.txt
|
||||
|
|
@ -22,6 +24,8 @@ pm_qos_interface.txt
|
|||
- info on Linux PM Quality of Service interface
|
||||
power_supply_class.txt
|
||||
- Tells userspace about battery, UPS, AC or DC power supply properties
|
||||
runtime_pm.txt
|
||||
- Power management framework for I/O devices.
|
||||
s2ram.txt
|
||||
- How to get suspend to ram working (and debug it when it isn't)
|
||||
states.txt
|
||||
|
|
@ -38,7 +42,5 @@ tricks.txt
|
|||
- How to trick software suspend (to disk) into working when it isn't
|
||||
userland-swsusp.txt
|
||||
- Experimental implementation of software suspend in userspace
|
||||
video_extension.txt
|
||||
- ACPI video extensions
|
||||
video.txt
|
||||
- Video issues during resume from suspend
|
||||
|
|
|
|||
|
|
@ -117,6 +117,7 @@ static void usage(char *progname)
|
|||
" -f val adjust the ptp clock frequency by 'val' ppb\n"
|
||||
" -g get the ptp clock time\n"
|
||||
" -h prints this message\n"
|
||||
" -i val index for event/trigger\n"
|
||||
" -k val measure the time offset between system and phc clock\n"
|
||||
" for 'val' times (Maximum 25)\n"
|
||||
" -p val enable output with a period of 'val' nanoseconds\n"
|
||||
|
|
@ -154,6 +155,7 @@ int main(int argc, char *argv[])
|
|||
int capabilities = 0;
|
||||
int extts = 0;
|
||||
int gettime = 0;
|
||||
int index = 0;
|
||||
int oneshot = 0;
|
||||
int pct_offset = 0;
|
||||
int n_samples = 0;
|
||||
|
|
@ -167,7 +169,7 @@ int main(int argc, char *argv[])
|
|||
|
||||
progname = strrchr(argv[0], '/');
|
||||
progname = progname ? 1+progname : argv[0];
|
||||
while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghk:p:P:sSt:v"))) {
|
||||
while (EOF != (c = getopt(argc, argv, "a:A:cd:e:f:ghi:k:p:P:sSt:v"))) {
|
||||
switch (c) {
|
||||
case 'a':
|
||||
oneshot = atoi(optarg);
|
||||
|
|
@ -190,6 +192,9 @@ int main(int argc, char *argv[])
|
|||
case 'g':
|
||||
gettime = 1;
|
||||
break;
|
||||
case 'i':
|
||||
index = atoi(optarg);
|
||||
break;
|
||||
case 'k':
|
||||
pct_offset = 1;
|
||||
n_samples = atoi(optarg);
|
||||
|
|
@ -301,7 +306,7 @@ int main(int argc, char *argv[])
|
|||
|
||||
if (extts) {
|
||||
memset(&extts_request, 0, sizeof(extts_request));
|
||||
extts_request.index = 0;
|
||||
extts_request.index = index;
|
||||
extts_request.flags = PTP_ENABLE_FEATURE;
|
||||
if (ioctl(fd, PTP_EXTTS_REQUEST, &extts_request)) {
|
||||
perror("PTP_EXTTS_REQUEST");
|
||||
|
|
@ -375,7 +380,7 @@ int main(int argc, char *argv[])
|
|||
return -1;
|
||||
}
|
||||
memset(&perout_request, 0, sizeof(perout_request));
|
||||
perout_request.index = 0;
|
||||
perout_request.index = index;
|
||||
perout_request.start.sec = ts.tv_sec + 2;
|
||||
perout_request.start.nsec = 0;
|
||||
perout_request.period.sec = 0;
|
||||
|
|
|
|||
|
|
@ -16,11 +16,13 @@ Debugging390.txt
|
|||
- hints for debugging on s390 systems.
|
||||
driver-model.txt
|
||||
- information on s390 devices and the driver model.
|
||||
kvm.txt
|
||||
- ioctl calls to /dev/kvm on s390.
|
||||
monreader.txt
|
||||
- information on accessing the z/VM monitor stream from Linux.
|
||||
qeth.txt
|
||||
- HiperSockets Bridge Port Support.
|
||||
s390dbf.txt
|
||||
- information on using the s390 debug feature.
|
||||
TAPE
|
||||
- information on the driver for channel-attached tapes.
|
||||
zfcpdump
|
||||
zfcpdump.txt
|
||||
- information on the s390 SCSI dump tool.
|
||||
|
|
|
|||
|
|
@ -2,6 +2,8 @@
|
|||
- this file.
|
||||
sched-arch.txt
|
||||
- CPU Scheduler implementation hints for architecture specific code.
|
||||
sched-bwc.txt
|
||||
- CFS bandwidth control overview.
|
||||
sched-design-CFS.txt
|
||||
- goals, design and implementation of the Completely Fair Scheduler.
|
||||
sched-domains.txt
|
||||
|
|
|
|||
|
|
@ -36,6 +36,8 @@ NinjaSCSI.txt
|
|||
- info on WorkBiT NinjaSCSI-32/32Bi driver
|
||||
aacraid.txt
|
||||
- Driver supporting Adaptec RAID controllers
|
||||
advansys.txt
|
||||
- List of Advansys Host Adapters
|
||||
aha152x.txt
|
||||
- info on driver for Adaptec AHA152x based adapters
|
||||
aic79xx.txt
|
||||
|
|
@ -44,6 +46,12 @@ aic7xxx.txt
|
|||
- info on driver for Adaptec controllers
|
||||
arcmsr_spec.txt
|
||||
- ARECA FIRMWARE SPEC (for IOP331 adapter)
|
||||
bfa.txt
|
||||
- Brocade FC/FCOE adapter driver.
|
||||
bnx2fc.txt
|
||||
- FCoE hardware offload for Broadcom network interfaces.
|
||||
cxgb3i.txt
|
||||
- Chelsio iSCSI Linux Driver
|
||||
dc395x.txt
|
||||
- README file for the dc395x SCSI driver
|
||||
dpti.txt
|
||||
|
|
@ -52,18 +60,24 @@ dtc3x80.txt
|
|||
- info on driver for DTC 2x80 based adapters
|
||||
g_NCR5380.txt
|
||||
- info on driver for NCR5380 and NCR53c400 based adapters
|
||||
hpsa.txt
|
||||
- HP Smart Array Controller SCSI driver.
|
||||
hptiop.txt
|
||||
- HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
|
||||
in2000.txt
|
||||
- info on in2000 driver
|
||||
libsas.txt
|
||||
- Serial Attached SCSI management layer.
|
||||
link_power_management_policy.txt
|
||||
- Link power management options.
|
||||
lpfc.txt
|
||||
- LPFC driver release notes
|
||||
megaraid.txt
|
||||
- Common Management Module, shared code handling ioctls for LSI drivers
|
||||
ncr53c8xx.txt
|
||||
- info on driver for NCR53c8xx based adapters
|
||||
osd.txt
|
||||
Object-Based Storage Device, command set introduction.
|
||||
osst.txt
|
||||
- info on driver for OnStream SC-x0 SCSI tape
|
||||
ppa.txt
|
||||
|
|
@ -74,6 +88,8 @@ scsi-changer.txt
|
|||
- README for the SCSI media changer driver
|
||||
scsi-generic.txt
|
||||
- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
|
||||
scsi-parameters.txt
|
||||
- List of SCSI-parameters to pass to the kernel at module load-time.
|
||||
scsi.txt
|
||||
- short blurb on using SCSI support as a module.
|
||||
scsi_mid_low_api.txt
|
||||
|
|
|
|||
|
|
@ -4,10 +4,12 @@ README.cycladesZ
|
|||
- info on Cyclades-Z firmware loading.
|
||||
digiepca.txt
|
||||
- info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards.
|
||||
hayes-esp.txt
|
||||
- info on using the Hayes ESP serial driver.
|
||||
driver
|
||||
- intro to the low level serial driver.
|
||||
moxa-smartio
|
||||
- file with info on installing/using Moxa multiport serial driver.
|
||||
n_gsm.txt
|
||||
- GSM 0710 tty multiplexer howto.
|
||||
riscom8.txt
|
||||
- notes on using the RISCom/8 multi-port serial driver.
|
||||
rocket.txt
|
||||
|
|
|
|||
|
|
@ -0,0 +1,22 @@
|
|||
00-INDEX
|
||||
- this file.
|
||||
Makefile
|
||||
- Makefile for the example sourcefiles.
|
||||
butterfly
|
||||
- AVR Butterfly SPI driver overview and pin configuration.
|
||||
ep93xx_spi
|
||||
- Basic EP93xx SPI driver configuration.
|
||||
pxa2xx
|
||||
- PXA2xx SPI master controller build by spi_message fifo wq
|
||||
spidev
|
||||
- Intro to the userspace API for spi devices
|
||||
spidev_fdx.c
|
||||
- spidev example file
|
||||
spi-lm70llp
|
||||
- Connecting an LM70-LLP sensor to the kernel via the SPI subsys.
|
||||
spi-sc18is602
|
||||
- NXP SC18IS602/603 I2C-bus to SPI bridge
|
||||
spi-summary
|
||||
- (Linux) SPI overview. If unsure about SPI or SPI in Linux, start here.
|
||||
spidev_test.c
|
||||
- SPI testing utility.
|
||||
|
|
@ -543,7 +543,22 @@ SPI MASTER METHODS
|
|||
queuing transfers that arrive in the meantime. When the driver is
|
||||
finished with this message, it must call
|
||||
spi_finalize_current_message() so the subsystem can issue the next
|
||||
transfer. This may sleep.
|
||||
message. This may sleep.
|
||||
|
||||
master->transfer_one(struct spi_master *master, struct spi_device *spi,
|
||||
struct spi_transfer *transfer)
|
||||
The subsystem calls the driver to transfer a single transfer while
|
||||
queuing transfers that arrive in the meantime. When the driver is
|
||||
finished with this transfer, it must call
|
||||
spi_finalize_current_transfer() so the subsystem can issue the next
|
||||
transfer. This may sleep. Note: transfer_one and transfer_one_message
|
||||
are mutually exclusive; when both are set, the generic subsystem does
|
||||
not call your transfer_one callback.
|
||||
|
||||
Return values:
|
||||
negative errno: error
|
||||
0: transfer is finished
|
||||
1: transfer is still in progress
|
||||
|
||||
DEPRECATED METHODS
|
||||
|
||||
|
|
|
|||
|
|
@ -8,6 +8,8 @@ hpet_example.c
|
|||
- sample hpet timer test program
|
||||
hrtimers.txt
|
||||
- subsystem for high-resolution kernel timers
|
||||
Makefile
|
||||
- Build and link hpet_example
|
||||
NO_HZ.txt
|
||||
- Summary of the different methods for the scheduler clock-interrupts management.
|
||||
timers-howto.txt
|
||||
|
|
|
|||
|
|
@ -20,5 +20,7 @@ ppc-pv.txt
|
|||
- the paravirtualization interface on PowerPC.
|
||||
review-checklist.txt
|
||||
- review checklist for KVM patches.
|
||||
s390-diag.txt
|
||||
- Diagnose hypercall description (for IBM S/390)
|
||||
timekeeping.txt
|
||||
- timekeeping virtualization for x86-based architectures.
|
||||
|
|
|
|||
|
|
@ -16,8 +16,6 @@ hwpoison.txt
|
|||
- explains what hwpoison is
|
||||
ksm.txt
|
||||
- how to use the Kernel Samepage Merging feature.
|
||||
locking
|
||||
- info on how locking and synchronization is done in the Linux vm code.
|
||||
numa
|
||||
- information about NUMA specific code in the Linux vm.
|
||||
numa_memory_policy.txt
|
||||
|
|
@ -32,6 +30,8 @@ slub.txt
|
|||
- a short users guide for SLUB.
|
||||
soft-dirty.txt
|
||||
- short explanation for soft-dirty PTEs
|
||||
split_page_table_lock
|
||||
- Separate per-table lock to improve scalability of the old page_table_lock.
|
||||
transhuge.txt
|
||||
- Transparent Hugepage Support, alternative way of using hugepages.
|
||||
unevictable-lru.txt
|
||||
|
|
|
|||
|
|
@ -4,7 +4,9 @@ ds2482
|
|||
- The Maxim/Dallas Semiconductor DS2482 provides 1-wire busses.
|
||||
ds2490
|
||||
- The Maxim/Dallas Semiconductor DS2490 builds USB <-> W1 bridges.
|
||||
mxc_w1
|
||||
mxc-w1
|
||||
- W1 master controller driver found on Freescale MX2/MX3 SoCs
|
||||
omap-hdq
|
||||
- HDQ/1-wire module of TI OMAP 2430/3430.
|
||||
w1-gpio
|
||||
- GPIO 1-wire bus master driver.
|
||||
|
|
|
|||
|
|
@ -4,3 +4,5 @@ w1_therm
|
|||
- The Maxim/Dallas Semiconductor ds18*20 temperature sensor.
|
||||
w1_ds2423
|
||||
- The Maxim/Dallas Semiconductor ds2423 counter device.
|
||||
w1_ds28e04
|
||||
- The Maxim/Dallas Semiconductor ds28e04 eeprom.
|
||||
|
|
|
|||
|
|
@ -1,6 +1,20 @@
|
|||
00-INDEX
|
||||
- this file
|
||||
mtrr.txt
|
||||
- how to use x86 Memory Type Range Registers to increase performance
|
||||
boot.txt
|
||||
- List of boot protocol versions
|
||||
early-microcode.txt
|
||||
- How to load microcode from an initrd-CPIO archive early to fix CPU issues.
|
||||
earlyprintk.txt
|
||||
- Using earlyprintk with a USB2 debug port key.
|
||||
entry_64.txt
|
||||
- Describe (some of the) kernel entry points for x86.
|
||||
exception-tables.txt
|
||||
- why and how Linux kernel uses exception tables on x86
|
||||
mtrr.txt
|
||||
- how to use x86 Memory Type Range Registers to increase performance
|
||||
pat.txt
|
||||
- Page Attribute Table intro and API
|
||||
usb-legacy-support.txt
|
||||
- how to fix/avoid quirks when using emulated PS/2 mouse/keyboard.
|
||||
zero-page.txt
|
||||
- layout of the first page of memory.
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ help. Contact the Chinese maintainer if this translation is outdated
|
|||
or if there is a problem with the translation.
|
||||
|
||||
Maintainer: Will Deacon <will.deacon@arm.com>
|
||||
Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
|
||||
Chinese maintainer: Fu Wei <wefu@redhat.com>
|
||||
---------------------------------------------------------------------
|
||||
Documentation/arm64/booting.txt 的中文翻译
|
||||
|
||||
|
|
@ -16,9 +16,9 @@ Documentation/arm64/booting.txt 的中文翻译
|
|||
译存在问题，请联系中文版维护者。
|
||||
|
||||
英文版维护者： Will Deacon <will.deacon@arm.com>
|
||||
中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
|
||||
中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
|
||||
中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
|
||||
中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
|
||||
以下为正文
|
||||
---------------------------------------------------------------------
|
||||
|
|
@ -64,8 +64,8 @@ RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何
|
|||
|
||||
必要性: 强制
|
||||
|
||||
设备树数据块（dtb）大小必须不大于 2 MB，且位于从内核映像起始算起第一个
|
||||
512MB 内的 2MB 边界上。这使得内核可以通过初始页表中的单个节描述符来
|
||||
设备树数据块（dtb）必须 8 字节对齐，并位于从内核映像起始算起第一个 512MB
|
||||
内，且不得跨越 2MB 对齐边界。这使得内核可以通过初始页表中的单个节描述符来
|
||||
映射此数据块。
|
||||
|
||||
|
||||
|
|
@ -84,13 +84,23 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
|
|||
|
||||
必要性: 强制
|
||||
|
||||
已解压的内核映像包含一个 32 字节的头，内容如下：
|
||||
已解压的内核映像包含一个 64 字节的头，内容如下：
|
||||
|
||||
u32 magic = 0x14000008; /* 跳转到 stext, 小端 */
|
||||
u32 res0 = 0; /* 保留 */
|
||||
u32 code0; /* 可执行代码 */
|
||||
u32 code1; /* 可执行代码 */
|
||||
u64 text_offset; /* 映像装载偏移 */
|
||||
u64 res0 = 0; /* 保留 */
|
||||
u64 res1 = 0; /* 保留 */
|
||||
u64 res2 = 0; /* 保留 */
|
||||
u64 res3 = 0; /* 保留 */
|
||||
u64 res4 = 0; /* 保留 */
|
||||
u32 magic = 0x644d5241; /* 魔数, 小端, "ARM\x64" */
|
||||
u32 res5 = 0; /* 保留 */
|
||||
|
||||
|
||||
映像头注释：
|
||||
|
||||
- code0/code1 负责跳转到 stext.
|
||||
|
||||
映像必须位于系统 RAM 起始处的特定偏移（当前是 0x80000）。系统 RAM
|
||||
的起始地址必须是以 2MB 对齐的。
|
||||
|
|
@ -118,9 +128,9 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
|
|||
外部高速缓存（如果存在）必须配置并禁用。
|
||||
|
||||
- 架构计时器
|
||||
CNTFRQ 必须设定为计时器的频率。
|
||||
如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的 EL1PCTEN (bit 0)
|
||||
必须置位。
|
||||
CNTFRQ 必须设定为计时器的频率，且 CNTVOFF 必须设定为对所有 CPU
|
||||
都一致的值。如果在 EL1 模式下进入内核，则 CNTHCTL_EL2 中的
|
||||
EL1PCTEN (bit 0) 必须置位。
|
||||
|
||||
- 一致性
|
||||
通过内核启动的所有 CPU 在内核入口地址上必须处于相同的一致性域中。
|
||||
|
|
@ -131,23 +141,40 @@ AArch64 内核当前没有提供自解压代码，因此如果使用了压缩内
|
|||
在进入内核映像的异常级中，所有构架中可写的系统寄存器必须通过软件
|
||||
在一个更高的异常级别下初始化，以防止在 未知 状态下运行。
|
||||
|
||||
以上对于 CPU 模式、高速缓存、MMU、架构计时器、一致性、系统寄存器的
|
||||
必要条件描述适用于所有 CPU。所有 CPU 必须在同一异常级别跳入内核。
|
||||
|
||||
引导装载程序必须在每个 CPU 处于以下状态时跳入内核入口：
|
||||
|
||||
- 主 CPU 必须直接跳入内核映像的第一条指令。通过此 CPU 传递的设备树
|
||||
数据块必须在每个 CPU 节点中包含以下内容：
|
||||
|
||||
1、‘enable-method’属性。目前，此字段支持的值仅为字符串“spin-table”。
|
||||
|
||||
2、‘cpu-release-addr’标识一个 64-bit、初始化为零的内存位置。
|
||||
数据块必须在每个 CPU 节点中包含一个 ‘enable-method’ 属性，所
|
||||
支持的 enable-method 请见下文。
|
||||
|
||||
引导装载程序必须生成这些设备树属性，并在跳入内核入口之前将其插入
|
||||
数据块。
|
||||
|
||||
- 任何辅助 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
|
||||
- enable-method 为 “spin-table” 的 CPU 必须在它们的 CPU
|
||||
节点中包含一个 ‘cpu-release-addr’ 属性。这个属性标识了一个
|
||||
64 位自然对齐且初始化为零的内存位置。
|
||||
|
||||
这些 CPU 必须在内存保留区（通过设备树中的 /memreserve/ 域传递
|
||||
给内核）中自旋于内核之外，轮询它们的 cpu-release-addr 位置（必须
|
||||
包含在保留区中）。可通过插入 wfe 指令来降低忙循环开销，而主 CPU 将
|
||||
发出 sev 指令。当对 cpu-release-addr 所指位置的读取操作返回非零值
|
||||
时，CPU 必须直接跳入此值所指向的地址。
|
||||
时，CPU 必须跳入此值所指向的地址。此值为一个单独的 64 位小端值，
|
||||
因此 CPU 须在跳转前将所读取的值转换为其本身的端模式。
|
||||
|
||||
- enable-method 为 “psci” 的 CPU 保持在内核外（比如，在
|
||||
memory 节点中描述为内核空间的内存区外，或在通过设备树 /memreserve/
|
||||
域中描述为内核保留区的空间中）。内核将会发起在 ARM 文档（编号
|
||||
ARM DEN 0022A：用于 ARM 上的电源状态协调接口系统软件）中描述的
|
||||
CPU_ON 调用来将 CPU 带入内核。
|
||||
|
||||
*译者注:到文档翻译时，此文档已更新为 ARM DEN 0022B。
|
||||
|
||||
设备树必须包含一个 ‘psci’ 节点，请参考以下文档：
|
||||
Documentation/devicetree/bindings/arm/psci.txt
|
||||
|
||||
|
||||
- 辅助 CPU 通用寄存器设置
|
||||
x0 = 0 (保留，将来可能使用)
|
||||
|
|
|
|||
|
|
@ -7,7 +7,7 @@ help. Contact the Chinese maintainer if this translation is outdated
|
|||
or if there is a problem with the translation.
|
||||
|
||||
Maintainer: Catalin Marinas <catalin.marinas@arm.com>
|
||||
Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
|
||||
Chinese maintainer: Fu Wei <wefu@redhat.com>
|
||||
---------------------------------------------------------------------
|
||||
Documentation/arm64/memory.txt 的中文翻译
|
||||
|
||||
|
|
@ -16,9 +16,9 @@ Documentation/arm64/memory.txt 的中文翻译
|
|||
译存在问题，请联系中文版维护者。
|
||||
|
||||
英文版维护者： Catalin Marinas <catalin.marinas@arm.com>
|
||||
中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
|
||||
中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
|
||||
中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
|
||||
中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
|
||||
以下为正文
|
||||
---------------------------------------------------------------------
|
||||
|
|
@ -41,7 +41,7 @@ AArch64 Linux 使用页大小为 4KB 的 3 级转换表配置，对于用户和
|
|||
TTBR1 中，且从不写入 TTBR0。
|
||||
|
||||
|
||||
AArch64 Linux 内存布局：
|
||||
AArch64 Linux 在页大小为 4KB 时的内存布局：
|
||||
|
||||
起始地址 结束地址 大小 用途
|
||||
-----------------------------------------------------------------------
|
||||
|
|
@ -55,15 +55,42 @@ ffffffbc00000000 ffffffbdffffffff 8GB vmemmap
|
|||
|
||||
ffffffbe00000000 ffffffbffbbfffff ~8GB [防护页，未来用于 vmmemap]
|
||||
|
||||
ffffffbffbc00000 ffffffbffbdfffff 2MB earlyprintk 设备
|
||||
|
||||
ffffffbffbe00000 ffffffbffbe0ffff 64KB PCI I/O 空间
|
||||
|
||||
ffffffbbffff0000 ffffffbcffffffff ~2MB [防护页]
|
||||
ffffffbffbe10000 ffffffbcffffffff ~2MB [防护页]
|
||||
|
||||
ffffffbffc000000 ffffffbfffffffff 64MB 模块
|
||||
|
||||
ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
|
||||
|
||||
|
||||
AArch64 Linux 在页大小为 64KB 时的内存布局：
|
||||
|
||||
起始地址 结束地址 大小 用途
|
||||
-----------------------------------------------------------------------
|
||||
0000000000000000 000003ffffffffff 4TB 用户空间
|
||||
|
||||
fffffc0000000000 fffffdfbfffeffff ~2TB vmalloc
|
||||
|
||||
fffffdfbffff0000 fffffdfbffffffff 64KB [防护页]
|
||||
|
||||
fffffdfc00000000 fffffdfdffffffff 8GB vmemmap
|
||||
|
||||
fffffdfe00000000 fffffdfffbbfffff ~8GB [防护页，未来用于 vmmemap]
|
||||
|
||||
fffffdfffbc00000 fffffdfffbdfffff 2MB earlyprintk 设备
|
||||
|
||||
fffffdfffbe00000 fffffdfffbe0ffff 64KB PCI I/O 空间
|
||||
|
||||
fffffdfffbe10000 fffffdfffbffffff ~2MB [防护页]
|
||||
|
||||
fffffdfffc000000 fffffdffffffffff 64MB 模块
|
||||
|
||||
fffffe0000000000 ffffffffffffffff 2TB 内核逻辑内存映射
|
||||
|
||||
|
||||
4KB 页大小的转换表查找：
|
||||
|
||||
+--------+--------+--------+--------+--------+--------+--------+--------+
|
||||
|
|
@ -91,3 +118,10 @@ ffffffc000000000 ffffffffffffffff 256GB 内核逻辑内存映射
|
|||
| | +--------------------------> [41:29] L2 索引 (仅使用 38:29 )
|
||||
| +-------------------------------> [47:42] L1 索引 (未使用)
|
||||
+-------------------------------------------------> [63] TTBR0/1
|
||||
|
||||
当使用 KVM 时, 管理程序（hypervisor）在 EL2 中通过相对内核虚拟地址的
|
||||
一个固定偏移来映射内核页（内核虚拟地址的高 24 位设为零）:
|
||||
|
||||
起始地址 结束地址 大小 用途
|
||||
-----------------------------------------------------------------------
|
||||
0000004000000000 0000007fffffffff 256GB 在 HYP 中映射的内核对象
|
||||
|
|
|
|||
|
|
@ -0,0 +1,52 @@
|
|||
Chinese translated version of Documentation/arm64/tagged-pointers.txt
|
||||
|
||||
If you have any comment or update to the content, please contact the
|
||||
original document maintainer directly. However, if you have a problem
|
||||
communicating in English you can also ask the Chinese maintainer for
|
||||
help. Contact the Chinese maintainer if this translation is outdated
|
||||
or if there is a problem with the translation.
|
||||
|
||||
Maintainer: Will Deacon <will.deacon@arm.com>
|
||||
Chinese maintainer: Fu Wei <wefu@redhat.com>
|
||||
---------------------------------------------------------------------
|
||||
Documentation/arm64/tagged-pointers.txt 的中文翻译
|
||||
|
||||
如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
|
||||
交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
|
||||
译存在问题，请联系中文版维护者。
|
||||
|
||||
英文版维护者： Will Deacon <will.deacon@arm.com>
|
||||
中文版维护者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
中文版翻译者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
中文版校译者： 傅炜 Fu Wei <wefu@redhat.com>
|
||||
|
||||
以下为正文
|
||||
---------------------------------------------------------------------
|
||||
Linux 在 AArch64 中带标记的虚拟地址
|
||||
=================================
|
||||
|
||||
作者: Will Deacon <will.deacon@arm.com>
|
||||
日期: 2013 年 06 月 12 日
|
||||
|
||||
本文档简述了在 AArch64 地址转换系统中提供的带标记的虚拟地址及其在
|
||||
AArch64 Linux 中的潜在用途。
|
||||
|
||||
内核提供的地址转换表配置使通过 TTBR0 完成的虚拟地址转换（即用户空间
|
||||
映射），其虚拟地址的最高 8 位（63:56）会被转换硬件所忽略。这种机制
|
||||
让这些位可供应用程序自由使用，其注意事项如下：
|
||||
|
||||
(1) 内核要求所有传递到 EL1 的用户空间地址带有 0x00 标记。
|
||||
这意味着任何携带用户空间虚拟地址的系统调用（syscall）
|
||||
参数 *必须* 在陷入内核前使它们的最高字节被清零。
|
||||
|
||||
(2) 非零标记在传递信号时不被保存。这意味着在应用程序中利用了
|
||||
标记的信号处理函数无法依赖 siginfo_t 的用户空间虚拟
|
||||
地址所携带的包含其内部域信息的标记。此规则的一个例外是
|
||||
当信号是在调试观察点的异常处理程序中产生的，此时标记的
|
||||
信息将被保存。
|
||||
|
||||
(3) 当使用带标记的指针时需特别留心，因为仅对两个虚拟地址
|
||||
的高字节，C 编译器很可能无法判断它们是不同的。
|
||||
|
||||
此构架会阻止对带标记的 PC 指针的利用，因此在异常返回时，其高字节
|
||||
将被设置成一个为 “55” 的扩展符。
|
||||
21
MAINTAINERS
21
MAINTAINERS
|
|
@ -1860,6 +1860,7 @@ F: drivers/net/ethernet/broadcom/bnx2x/
|
|||
|
||||
BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
|
||||
M: Christian Daudt <bcm@fixthebug.org>
|
||||
M: Matt Porter <mporter@linaro.org>
|
||||
L: bcm-kernel-feedback-list@broadcom.com
|
||||
T: git git://git.github.com/broadcom/bcm11351
|
||||
S: Maintained
|
||||
|
|
@ -2367,7 +2368,7 @@ F: include/linux/cpufreq.h
|
|||
|
||||
CPU FREQUENCY DRIVERS - ARM BIG LITTLE
|
||||
M: Viresh Kumar <viresh.kumar@linaro.org>
|
||||
M: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>
|
||||
M: Sudeep Holla <sudeep.holla@arm.com>
|
||||
L: cpufreq@vger.kernel.org
|
||||
L: linux-pm@vger.kernel.org
|
||||
W: http://www.arm.com/products/processors/technologies/biglittleprocessing.php
|
||||
|
|
@ -2408,8 +2409,10 @@ F: tools/power/cpupower/
|
|||
|
||||
CPUSETS
|
||||
M: Li Zefan <lizefan@huawei.com>
|
||||
L: cgroups@vger.kernel.org
|
||||
W: http://www.bullopensource.org/cpuset/
|
||||
W: http://oss.sgi.com/projects/cpusets/
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
|
||||
S: Maintained
|
||||
F: Documentation/cgroups/cpusets.txt
|
||||
F: include/linux/cpuset.h
|
||||
|
|
@ -2857,7 +2860,7 @@ M: Jani Nikula <jani.nikula@linux.intel.com>
|
|||
L: intel-gfx@lists.freedesktop.org
|
||||
L: dri-devel@lists.freedesktop.org
|
||||
Q: http://patchwork.freedesktop.org/project/intel-gfx/
|
||||
T: git git://people.freedesktop.org/~danvet/drm-intel
|
||||
T: git git://anongit.freedesktop.org/drm-intel
|
||||
S: Supported
|
||||
F: drivers/gpu/drm/i915/
|
||||
F: include/drm/i915*
|
||||
|
|
@ -3324,6 +3327,17 @@ S: Maintained
|
|||
F: include/linux/netfilter_bridge/
|
||||
F: net/bridge/
|
||||
|
||||
ETHERNET PHY LIBRARY
|
||||
M: Florian Fainelli <f.fainelli@gmail.com>
|
||||
L: netdev@vger.kernel.org
|
||||
S: Maintained
|
||||
F: include/linux/phy.h
|
||||
F: include/linux/phy_fixed.h
|
||||
F: drivers/net/phy/
|
||||
F: Documentation/networking/phy.txt
|
||||
F: drivers/of/of_mdio.c
|
||||
F: drivers/of/of_net.c
|
||||
|
||||
EXT2 FILE SYSTEM
|
||||
M: Jan Kara <jack@suse.cz>
|
||||
L: linux-ext4@vger.kernel.org
|
||||
|
|
@ -7196,7 +7210,7 @@ S: Maintained
|
|||
F: drivers/net/ethernet/rdc/r6040.c
|
||||
|
||||
RDS - RELIABLE DATAGRAM SOCKETS
|
||||
M: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
|
||||
M: Chien Yen <chien.yen@oracle.com>
|
||||
L: rds-devel@oss.oracle.com (moderated for non-subscribers)
|
||||
S: Supported
|
||||
F: net/rds/
|
||||
|
|
@ -9715,7 +9729,6 @@ F: drivers/xen/*swiotlb*
|
|||
XFS FILESYSTEM
|
||||
P: Silicon Graphics Inc
|
||||
M: Dave Chinner <david@fromorbit.com>
|
||||
M: Ben Myers <bpm@sgi.com>
|
||||
M: xfs@oss.sgi.com
|
||||
L: xfs@oss.sgi.com
|
||||
W: http://oss.sgi.com/projects/xfs
|
||||
|
|
|
|||
2
Makefile
2
Makefile
|
|
@ -1,7 +1,7 @@
|
|||
VERSION = 3
|
||||
PATCHLEVEL = 14
|
||||
SUBLEVEL = 0
|
||||
EXTRAVERSION = -rc1
|
||||
EXTRAVERSION = -rc4
|
||||
NAME = Shuffling Zombie Juror
|
||||
|
||||
# *DOCUMENTATION*
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
|
|||
dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
|
||||
# sama5d3
|
||||
dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
|
||||
dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
|
||||
|
|
@ -208,7 +209,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
|
|||
omap3-n900.dtb \
|
||||
omap3-n9.dtb \
|
||||
omap3-n950.dtb \
|
||||
omap3-tobi.dtb \
|
||||
omap3-overo-tobi.dtb \
|
||||
omap3-overo-storm-tobi.dtb \
|
||||
omap3-gta04.dtb \
|
||||
omap3-igep0020.dtb \
|
||||
omap3-igep0030.dtb \
|
||||
|
|
|
|||
|
|
@ -121,7 +121,7 @@
|
|||
ti,model = "AM335x-EVMSK";
|
||||
ti,audio-codec = <&tlv320aic3106>;
|
||||
ti,mcasp-controller = <&mcasp1>;
|
||||
ti,codec-clock-rate = <24576000>;
|
||||
ti,codec-clock-rate = <24000000>;
|
||||
ti,audio-routing =
|
||||
"Headphone Jack", "HPLOUT",
|
||||
"Headphone Jack", "HPROUT";
|
||||
|
|
@ -256,6 +256,12 @@
|
|||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcasp1_pins: mcasp1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
|
||||
|
|
@ -456,6 +462,9 @@
|
|||
status = "okay";
|
||||
vmmc-supply = <&vmmc_reg>;
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&sham {
|
||||
|
|
|
|||
|
|
@ -448,7 +448,7 @@
|
|||
ti,hwmods = "usb_otg_hs";
|
||||
status = "disabled";
|
||||
|
||||
usb_ctrl_mod: control@44e10000 {
|
||||
usb_ctrl_mod: control@44e10620 {
|
||||
compatible = "ti,am335x-usb-ctrl-module";
|
||||
reg = <0x44e10620 0x10
|
||||
0x44e10648 0x4>;
|
||||
|
|
@ -551,7 +551,7 @@
|
|||
"tx14", "tx15";
|
||||
};
|
||||
|
||||
cppi41dma: dma-controller@07402000 {
|
||||
cppi41dma: dma-controller@47402000 {
|
||||
compatible = "ti,am3359-cppi41";
|
||||
reg = <0x47400000 0x1000
|
||||
0x47402000 0x1000
|
||||
|
|
|
|||
|
|
@ -23,6 +23,7 @@
|
|||
gpio0 = &gpio0;
|
||||
gpio1 = &gpio1;
|
||||
gpio2 = &gpio2;
|
||||
eth3 = ð3;
|
||||
};
|
||||
|
||||
cpus {
|
||||
|
|
@ -291,7 +292,7 @@
|
|||
interrupts = <91>;
|
||||
};
|
||||
|
||||
ethernet@34000 {
|
||||
eth3: ethernet@34000 {
|
||||
compatible = "marvell,armada-370-neta";
|
||||
reg = <0x34000 0x4000>;
|
||||
interrupts = <14>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,229 @@
|
|||
/*
|
||||
* at91-sama5d3_xplained.dts - Device Tree file for the SAMA5D3 Xplained board
|
||||
*
|
||||
* Copyright (C) 2014 Atmel,
|
||||
* 2014 Nicolas Ferre <nicolas.ferre@atmel.com>
|
||||
*
|
||||
* Licensed under GPLv2 or later.
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "sama5d36.dtsi"
|
||||
|
||||
/ {
|
||||
model = "SAMA5D3 Xplained";
|
||||
compatible = "atmel,sama5d3-xplained", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x10000000>;
|
||||
};
|
||||
|
||||
ahb {
|
||||
apb {
|
||||
mmc0: mmc@f0000000 {
|
||||
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_dat4_7 &pinctrl_mmc0_cd>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <8>;
|
||||
cd-gpios = <&pioE 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
spi0: spi@f0004000 {
|
||||
cs-gpios = <&pioD 13 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
can0: can@f000c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c0: i2c@f0014000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c1: i2c@f0018000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb0: ethernet@f0028000 {
|
||||
phy-mode = "rgmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart0: serial@f001c000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usart1: serial@f0020000 {
|
||||
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
uart0: serial@f0024000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
mmc1: mmc@f8000000 {
|
||||
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioE 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
spi1: spi@f8008000 {
|
||||
cs-gpios = <&pioC 25 0>, <0>, <0>, <&pioD 16 0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
adc0: adc@f8018000 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_adc0_adtrg
|
||||
&pinctrl_adc0_ad0
|
||||
&pinctrl_adc0_ad1
|
||||
&pinctrl_adc0_ad2
|
||||
&pinctrl_adc0_ad3
|
||||
&pinctrl_adc0_ad4
|
||||
&pinctrl_adc0_ad5
|
||||
&pinctrl_adc0_ad6
|
||||
&pinctrl_adc0_ad7
|
||||
&pinctrl_adc0_ad8
|
||||
&pinctrl_adc0_ad9
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
i2c2: i2c@f801c000 {
|
||||
dmas = <0>, <0>; /* Do not use DMA for i2c2 */
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
macb1: ethernet@f802c000 {
|
||||
phy-mode = "rmii";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
dbgu: serial@ffffee00 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@fffff200 {
|
||||
board {
|
||||
pinctrl_mmc0_cd: mmc0_cd {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 0 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
|
||||
};
|
||||
|
||||
pinctrl_mmc1_cd: mmc1_cd {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
|
||||
};
|
||||
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 9 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PE9, conflicts with A9 */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmc: pmc@fffffc00 {
|
||||
main: mainck {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
nand0: nand@60000000 {
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
atmel,has-pmecc;
|
||||
atmel,pmecc-cap = <4>;
|
||||
atmel,pmecc-sector-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bootstrap";
|
||||
reg = <0x0 0x40000>;
|
||||
};
|
||||
|
||||
bootloader@40000 {
|
||||
label = "bootloader";
|
||||
reg = <0x40000 0x80000>;
|
||||
};
|
||||
|
||||
bootloaderenv@c0000 {
|
||||
label = "bootloader env";
|
||||
reg = <0xc0000 0xc0000>;
|
||||
};
|
||||
|
||||
dtb@180000 {
|
||||
label = "device tree";
|
||||
reg = <0x180000 0x80000>;
|
||||
};
|
||||
|
||||
kernel@200000 {
|
||||
label = "kernel";
|
||||
reg = <0x200000 0x600000>;
|
||||
};
|
||||
|
||||
rootfs@800000 {
|
||||
label = "rootfs";
|
||||
reg = <0x800000 0x0f800000>;
|
||||
};
|
||||
};
|
||||
|
||||
usb0: gadget@00500000 {
|
||||
atmel,vbus-gpio = <&pioE 9 GPIO_ACTIVE_HIGH>; /* PE9, conflicts with A9 */
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb1: ohci@00600000 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0
|
||||
&pioE 3 GPIO_ACTIVE_LOW
|
||||
&pioE 4 GPIO_ACTIVE_LOW
|
||||
>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: ehci@00700000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
bp3 {
|
||||
label = "PB_USER";
|
||||
gpios = <&pioE 29 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <0x104>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
d2 {
|
||||
label = "d2";
|
||||
gpios = <&pioE 23 GPIO_ACTIVE_LOW>; /* PE23, conflicts with A23, CTS2 */
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
d3 {
|
||||
label = "d3";
|
||||
gpios = <&pioE 24 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -523,7 +523,7 @@
|
|||
};
|
||||
|
||||
i2c0: i2c@fff88000 {
|
||||
compatible = "atmel,at91sam9263-i2c";
|
||||
compatible = "atmel,at91sam9260-i2c";
|
||||
reg = <0xfff88000 0x100>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>;
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -124,6 +124,10 @@
|
|||
nand-on-flash-bbt;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb0: ohci@00500000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
|
|
|
|||
|
|
@ -379,15 +379,6 @@
|
|||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
pmu_intc: pmu-interrupt-ctrl@d0050 {
|
||||
compatible = "marvell,dove-pmu-intc";
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <1>;
|
||||
reg = <0xd0050 0x8>;
|
||||
interrupts = <33>;
|
||||
marvell,#interrupts = <7>;
|
||||
};
|
||||
|
||||
pinctrl: pin-ctrl@d0200 {
|
||||
compatible = "marvell,dove-pinctrl";
|
||||
reg = <0xd0200 0x10>;
|
||||
|
|
@ -610,8 +601,6 @@
|
|||
rtc: real-time-clock@d8500 {
|
||||
compatible = "marvell,orion-rtc";
|
||||
reg = <0xd8500 0x20>;
|
||||
interrupt-parent = <&pmu_intc>;
|
||||
interrupts = <5>;
|
||||
};
|
||||
|
||||
gpio2: gpio-ctrl@e8400 {
|
||||
|
|
|
|||
|
|
@ -52,12 +52,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
codec: spdif-transmitter {
|
||||
compatible = "linux,spdif-dit";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hummingboard_spdif>;
|
||||
};
|
||||
|
||||
sound-spdif {
|
||||
compatible = "fsl,imx-audio-spdif";
|
||||
model = "imx-spdif";
|
||||
|
|
@ -111,7 +105,7 @@
|
|||
};
|
||||
|
||||
pinctrl_hummingboard_spdif: hummingboard-spdif {
|
||||
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
|
||||
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
|
||||
};
|
||||
|
||||
pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
|
||||
|
|
@ -142,6 +136,8 @@
|
|||
};
|
||||
|
||||
&spdif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_hummingboard_spdif>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -46,12 +46,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
codec: spdif-transmitter {
|
||||
compatible = "linux,spdif-dit";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_cubox_i_spdif>;
|
||||
};
|
||||
|
||||
sound-spdif {
|
||||
compatible = "fsl,imx-audio-spdif";
|
||||
model = "imx-spdif";
|
||||
|
|
@ -89,7 +83,7 @@
|
|||
};
|
||||
|
||||
pinctrl_cubox_i_spdif: cubox-i-spdif {
|
||||
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
|
||||
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
|
||||
};
|
||||
|
||||
pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
|
||||
|
|
@ -121,6 +115,8 @@
|
|||
};
|
||||
|
||||
&spdif {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_cubox_i_spdif>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -32,7 +32,7 @@
|
|||
aux-button {
|
||||
label = "aux";
|
||||
linux,code = <169>;
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
|
||||
gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
};
|
||||
|
|
@ -92,6 +92,8 @@
|
|||
bmp085@77 {
|
||||
compatible = "bosch,bmp085";
|
||||
reg = <0x77>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
|
||||
/* leds */
|
||||
|
|
@ -141,8 +143,8 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
vmmc-supply = <&vmmc1>;
|
||||
vmmc_aux-supply = <&vsim>;
|
||||
bus-width = <4>;
|
||||
ti,non-removable;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
|
|
|
|||
|
|
@ -14,5 +14,5 @@
|
|||
|
||||
/ {
|
||||
model = "Nokia N9";
|
||||
compatible = "nokia,omap3-n9", "ti,omap3";
|
||||
compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/*
|
||||
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
|
||||
* Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
|
||||
* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 (or later) as
|
||||
|
|
@ -13,7 +13,7 @@
|
|||
|
||||
/ {
|
||||
model = "Nokia N900";
|
||||
compatible = "nokia,omap3-n900", "ti,omap3";
|
||||
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
|
|
|
|||
|
|
@ -14,5 +14,5 @@
|
|||
|
||||
/ {
|
||||
model = "Nokia N950";
|
||||
compatible = "nokia,omap3-n950", "ti,omap3";
|
||||
compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,22 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Tobi expansion board is manufactured by Gumstix Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap36xx.dtsi"
|
||||
#include "omap3-overo-tobi-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
|
||||
compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
|
||||
};
|
||||
|
||||
|
|
@ -13,9 +13,6 @@
|
|||
#include "omap3-overo.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI OMAP3 Gumstix Overo on Tobi";
|
||||
compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
heartbeat {
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* Tobi expansion board is manufactured by Gumstix Inc.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
#include "omap3-overo-tobi-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "OMAP35xx Gumstix Overo on Tobi";
|
||||
compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
|
||||
};
|
||||
|
||||
|
|
@ -9,9 +9,6 @@
|
|||
/*
|
||||
* The Gumstix Overo must be combined with an expansion board.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "omap34xx.dtsi"
|
||||
|
||||
/ {
|
||||
pwmleds {
|
||||
|
|
|
|||
|
|
@ -275,6 +275,8 @@
|
|||
gpmc,num-waitpins = <4>;
|
||||
ti,hwmods = "gpmc";
|
||||
ti,no-idle-on-init;
|
||||
clocks = <&l3_div_ck>;
|
||||
clock-names = "fck";
|
||||
};
|
||||
|
||||
uart1: serial@4806a000 {
|
||||
|
|
|
|||
|
|
@ -302,6 +302,8 @@
|
|||
gpmc,num-cs = <8>;
|
||||
gpmc,num-waitpins = <4>;
|
||||
ti,hwmods = "gpmc";
|
||||
clocks = <&l3_iclk_div>;
|
||||
clock-names = "fck";
|
||||
};
|
||||
|
||||
i2c1: i2c@48070000 {
|
||||
|
|
|
|||
|
|
@ -1228,7 +1228,7 @@
|
|||
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
|
||||
reg = <0x00600000 0x100000>;
|
||||
interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
|
||||
clocks = <&usb>, <&uhphs_clk>, <&udphs_clk>,
|
||||
clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>,
|
||||
<&uhpck>;
|
||||
clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck";
|
||||
status = "disabled";
|
||||
|
|
|
|||
|
|
@ -188,7 +188,6 @@
|
|||
msp2: msp@80117000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&msp2_default_mode>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
msp3: msp@80125000 {
|
||||
|
|
|
|||
|
|
@ -315,7 +315,7 @@
|
|||
ranges;
|
||||
|
||||
emac: ethernet@01c0b000 {
|
||||
compatible = "allwinner,sun4i-emac";
|
||||
compatible = "allwinner,sun4i-a10-emac";
|
||||
reg = <0x01c0b000 0x1000>;
|
||||
interrupts = <55>;
|
||||
clocks = <&ahb_gates 17>;
|
||||
|
|
@ -323,7 +323,7 @@
|
|||
};
|
||||
|
||||
mdio@01c0b080 {
|
||||
compatible = "allwinner,sun4i-mdio";
|
||||
compatible = "allwinner,sun4i-a10-mdio";
|
||||
reg = <0x01c0b080 0x14>;
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -278,7 +278,7 @@
|
|||
ranges;
|
||||
|
||||
emac: ethernet@01c0b000 {
|
||||
compatible = "allwinner,sun4i-emac";
|
||||
compatible = "allwinner,sun4i-a10-emac";
|
||||
reg = <0x01c0b000 0x1000>;
|
||||
interrupts = <55>;
|
||||
clocks = <&ahb_gates 17>;
|
||||
|
|
@ -286,7 +286,7 @@
|
|||
};
|
||||
|
||||
mdio@01c0b080 {
|
||||
compatible = "allwinner,sun4i-mdio";
|
||||
compatible = "allwinner,sun4i-a10-mdio";
|
||||
reg = <0x01c0b080 0x14>;
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -340,7 +340,7 @@
|
|||
ranges;
|
||||
|
||||
emac: ethernet@01c0b000 {
|
||||
compatible = "allwinner,sun4i-emac";
|
||||
compatible = "allwinner,sun4i-a10-emac";
|
||||
reg = <0x01c0b000 0x1000>;
|
||||
interrupts = <0 55 4>;
|
||||
clocks = <&ahb_gates 17>;
|
||||
|
|
@ -348,7 +348,7 @@
|
|||
};
|
||||
|
||||
mdio@01c0b080 {
|
||||
compatible = "allwinner,sun4i-mdio";
|
||||
compatible = "allwinner,sun4i-a10-mdio";
|
||||
reg = <0x01c0b080 0x14>;
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -57,6 +57,8 @@
|
|||
resets = <&tegra_car 27>;
|
||||
reset-names = "dc";
|
||||
|
||||
nvidia,head = <0>;
|
||||
|
||||
rgb {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -72,6 +74,8 @@
|
|||
resets = <&tegra_car 26>;
|
||||
reset-names = "dc";
|
||||
|
||||
nvidia,head = <1>;
|
||||
|
||||
rgb {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -94,6 +94,8 @@
|
|||
resets = <&tegra_car 27>;
|
||||
reset-names = "dc";
|
||||
|
||||
nvidia,head = <0>;
|
||||
|
||||
rgb {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -109,6 +111,8 @@
|
|||
resets = <&tegra_car 26>;
|
||||
reset-names = "dc";
|
||||
|
||||
nvidia,head = <1>;
|
||||
|
||||
rgb {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -28,7 +28,7 @@
|
|||
compatible = "nvidia,cardhu", "nvidia,tegra30";
|
||||
|
||||
aliases {
|
||||
rtc0 = "/i2c@7000d000/tps6586x@34";
|
||||
rtc0 = "/i2c@7000d000/tps65911@2d";
|
||||
rtc1 = "/rtc@7000e000";
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -170,6 +170,8 @@
|
|||
resets = <&tegra_car 27>;
|
||||
reset-names = "dc";
|
||||
|
||||
nvidia,head = <0>;
|
||||
|
||||
rgb {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -185,6 +187,8 @@
|
|||
resets = <&tegra_car 26>;
|
||||
reset-names = "dc";
|
||||
|
||||
nvidia,head = <1>;
|
||||
|
||||
rgb {
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -1,2 +0,0 @@
|
|||
/include/ "tests-phandle.dtsi"
|
||||
/include/ "tests-interrupts.dtsi"
|
||||
|
|
@ -1,4 +1,4 @@
|
|||
/include/ "versatile-ab.dts"
|
||||
#include <versatile-ab.dts>
|
||||
|
||||
/ {
|
||||
model = "ARM Versatile PB";
|
||||
|
|
@ -47,4 +47,4 @@
|
|||
};
|
||||
};
|
||||
|
||||
/include/ "testcases/tests.dtsi"
|
||||
#include <testcases.dtsi>
|
||||
|
|
|
|||
|
|
@ -29,6 +29,7 @@ CONFIG_ARCH_OMAP3=y
|
|||
CONFIG_ARCH_OMAP4=y
|
||||
CONFIG_SOC_OMAP5=y
|
||||
CONFIG_SOC_AM33XX=y
|
||||
CONFIG_SOC_DRA7XX=y
|
||||
CONFIG_SOC_AM43XX=y
|
||||
CONFIG_ARCH_ROCKCHIP=y
|
||||
CONFIG_ARCH_SOCFPGA=y
|
||||
|
|
|
|||
|
|
@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
|
|||
static inline void __flush_icache_all(void)
|
||||
{
|
||||
__flush_icache_preferred();
|
||||
dsb();
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -120,13 +120,16 @@
|
|||
/*
|
||||
* 2nd stage PTE definitions for LPAE.
|
||||
*/
|
||||
#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */
|
||||
#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
|
||||
#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
|
||||
#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
|
||||
#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
|
||||
#define L_PTE_S2_MT_UNCACHED (_AT(pteval_t, 0x0) << 2) /* strongly ordered */
|
||||
#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* normal inner write-through */
|
||||
#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* normal inner write-back */
|
||||
#define L_PTE_S2_MT_DEV_SHARED (_AT(pteval_t, 0x1) << 2) /* device */
|
||||
#define L_PTE_S2_MT_MASK (_AT(pteval_t, 0xf) << 2)
|
||||
|
||||
#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
|
||||
#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
|
||||
#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
|
||||
|
||||
#define L_PMD_S2_RDWR (_AT(pmdval_t, 3) << 6) /* HAP[2:1] */
|
||||
|
||||
/*
|
||||
* Hyp-mode PL2 PTE definitions for LPAE.
|
||||
|
|
|
|||
|
|
@ -37,18 +37,9 @@
|
|||
|
||||
static inline void dsb_sev(void)
|
||||
{
|
||||
#if __LINUX_ARM_ARCH__ >= 7
|
||||
__asm__ __volatile__ (
|
||||
"dsb ishst\n"
|
||||
SEV
|
||||
);
|
||||
#else
|
||||
__asm__ __volatile__ (
|
||||
"mcr p15, 0, %0, c7, c10, 4\n"
|
||||
SEV
|
||||
: : "r" (0)
|
||||
);
|
||||
#endif
|
||||
|
||||
dsb(ishst);
|
||||
__asm__(SEV);
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
|
|||
|
|
@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
|
|||
kernel_data.end = virt_to_phys(_end - 1);
|
||||
|
||||
for_each_memblock(memory, region) {
|
||||
res = memblock_virt_alloc_low(sizeof(*res), 0);
|
||||
res = memblock_virt_alloc(sizeof(*res), 0);
|
||||
res->name = "System RAM";
|
||||
res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
|
||||
res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
|
||||
|
|
|
|||
|
|
@ -8,7 +8,7 @@ config ARCH_HI3xxx
|
|||
select CLKSRC_OF
|
||||
select GENERIC_CLOCKEVENTS
|
||||
select HAVE_ARM_SCU
|
||||
select HAVE_ARM_TWD
|
||||
select HAVE_ARM_TWD if SMP
|
||||
select HAVE_SMP
|
||||
select PINCTRL
|
||||
select PINCTRL_SINGLE
|
||||
|
|
|
|||
|
|
@ -101,11 +101,9 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
|
|||
obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
|
||||
obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
|
||||
|
||||
ifeq ($(CONFIG_PM),y)
|
||||
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
|
||||
# i.MX6SL reuses i.MX6Q code
|
||||
obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
|
||||
endif
|
||||
|
||||
# i.MX5 based machines
|
||||
obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
|
||||
|
|
|
|||
|
|
@ -482,6 +482,9 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node)
|
|||
if (IS_ENABLED(CONFIG_PCI_IMX6))
|
||||
clk_set_parent(clk[lvds1_sel], clk[sata_ref]);
|
||||
|
||||
/* Set initial power mode */
|
||||
imx6q_set_lpm(WAIT_CLOCKED);
|
||||
|
||||
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
|
||||
base = of_iomap(np, 0);
|
||||
WARN_ON(!base);
|
||||
|
|
|
|||
|
|
@ -266,6 +266,9 @@ static void __init imx6sl_clocks_init(struct device_node *ccm_node)
|
|||
/* Audio-related clocks configuration */
|
||||
clk_set_parent(clks[IMX6SL_CLK_SPDIF0_SEL], clks[IMX6SL_CLK_PLL3_PFD3]);
|
||||
|
||||
/* Set initial power mode */
|
||||
imx6q_set_lpm(WAIT_CLOCKED);
|
||||
|
||||
np = of_find_compatible_node(NULL, NULL, "fsl,imx6sl-gpt");
|
||||
base = of_iomap(np, 0);
|
||||
WARN_ON(!base);
|
||||
|
|
|
|||
|
|
@ -144,13 +144,11 @@ void imx6q_set_chicken_bit(void);
|
|||
void imx_cpu_die(unsigned int cpu);
|
||||
int imx_cpu_kill(unsigned int cpu);
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
void imx6q_pm_init(void);
|
||||
void imx6q_pm_set_ccm_base(void __iomem *base);
|
||||
#ifdef CONFIG_PM
|
||||
void imx5_pm_init(void);
|
||||
#else
|
||||
static inline void imx6q_pm_init(void) {}
|
||||
static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
|
||||
static inline void imx5_pm_init(void) {}
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -236,8 +236,6 @@ void __init imx6q_pm_init(void)
|
|||
regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
|
||||
IMX6Q_GPR1_GINT);
|
||||
|
||||
/* Set initial power mode */
|
||||
imx6q_set_lpm(WAIT_CLOCKED);
|
||||
|
||||
suspend_set_ops(&imx6q_pm_ops);
|
||||
}
|
||||
|
|
|
|||
|
|
@ -2,7 +2,6 @@ config ARCH_MOXART
|
|||
bool "MOXA ART SoC" if ARCH_MULTI_V4T
|
||||
select CPU_FA526
|
||||
select ARM_DMA_MEM_BUFFERABLE
|
||||
select DMA_OF
|
||||
select USE_OF
|
||||
select CLKSRC_OF
|
||||
select CLKSRC_MMIO
|
||||
|
|
|
|||
|
|
@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
|
|||
.register_dev = 1,
|
||||
.hmc_mode = 16,
|
||||
.pins[0] = 6,
|
||||
.extcon = "tahvo-usb",
|
||||
};
|
||||
|
||||
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
|
||||
|
|
|
|||
|
|
@ -50,11 +50,12 @@ config SOC_OMAP5
|
|||
bool "TI OMAP5"
|
||||
depends on ARCH_MULTI_V7
|
||||
select ARCH_OMAP2PLUS
|
||||
select ARCH_HAS_OPP
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
select HAVE_ARM_SCU if SMP
|
||||
select HAVE_ARM_TWD if LOCAL_TIMERS
|
||||
select HAVE_ARM_TWD if SMP
|
||||
select HAVE_SMP
|
||||
select HAVE_ARM_ARCH_TIMER
|
||||
select ARM_ERRATA_798181 if SMP
|
||||
|
|
@ -63,6 +64,7 @@ config SOC_AM33XX
|
|||
bool "TI AM33XX"
|
||||
depends on ARCH_MULTI_V7
|
||||
select ARCH_OMAP2PLUS
|
||||
select ARCH_HAS_OPP
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select CPU_V7
|
||||
select MULTI_IRQ_HANDLER
|
||||
|
|
@ -72,6 +74,7 @@ config SOC_AM43XX
|
|||
depends on ARCH_MULTI_V7
|
||||
select CPU_V7
|
||||
select ARCH_OMAP2PLUS
|
||||
select ARCH_HAS_OPP
|
||||
select MULTI_IRQ_HANDLER
|
||||
select ARM_GIC
|
||||
select MACH_OMAP_GENERIC
|
||||
|
|
@ -80,6 +83,7 @@ config SOC_DRA7XX
|
|||
bool "TI DRA7XX"
|
||||
depends on ARCH_MULTI_V7
|
||||
select ARCH_OMAP2PLUS
|
||||
select ARCH_HAS_OPP
|
||||
select ARM_CPU_SUSPEND if PM
|
||||
select ARM_GIC
|
||||
select CPU_V7
|
||||
|
|
@ -268,9 +272,6 @@ config MACH_OMAP_3430SDP
|
|||
default y
|
||||
select OMAP_PACKAGE_CBB
|
||||
|
||||
config MACH_NOKIA_N800
|
||||
bool
|
||||
|
||||
config MACH_NOKIA_N810
|
||||
bool
|
||||
|
||||
|
|
@ -281,7 +282,6 @@ config MACH_NOKIA_N8X0
|
|||
bool "Nokia N800/N810"
|
||||
depends on SOC_OMAP2420
|
||||
default y
|
||||
select MACH_NOKIA_N800
|
||||
select MACH_NOKIA_N810
|
||||
select MACH_NOKIA_N810_WIMAX
|
||||
select OMAP_PACKAGE_ZAC
|
||||
|
|
|
|||
|
|
@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
|
|||
of_property_read_bool(np, "gpmc,time-para-granularity");
|
||||
}
|
||||
|
||||
#ifdef CONFIG_MTD_NAND
|
||||
#if IS_ENABLED(CONFIG_MTD_NAND)
|
||||
|
||||
static const char * const nand_xfer_types[] = {
|
||||
[NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
|
||||
|
|
@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
|
|||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_MTD_ONENAND
|
||||
#if IS_ENABLED(CONFIG_MTD_ONENAND)
|
||||
static int gpmc_probe_onenand_child(struct platform_device *pdev,
|
||||
struct device_node *child)
|
||||
{
|
||||
|
|
|
|||
|
|
@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
|
|||
.length = L4_EMU_34XX_SIZE,
|
||||
.type = MT_DEVICE
|
||||
},
|
||||
#if defined(CONFIG_DEBUG_LL) && \
|
||||
(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
|
||||
{
|
||||
.virtual = ZOOM_UART_VIRT,
|
||||
.pfn = __phys_to_pfn(ZOOM_UART_BASE),
|
||||
.length = SZ_1M,
|
||||
.type = MT_DEVICE
|
||||
},
|
||||
#endif
|
||||
};
|
||||
#endif
|
||||
|
||||
|
|
|
|||
|
|
@ -222,6 +222,7 @@ void __init ti81xx_init_irq(void)
|
|||
static inline void omap_intc_handle_irq(void __iomem *base_addr, struct pt_regs *regs)
|
||||
{
|
||||
u32 irqnr;
|
||||
int handled_irq = 0;
|
||||
|
||||
do {
|
||||
irqnr = readl_relaxed(base_addr + 0x98);
|
||||
|
|
@ -249,8 +250,15 @@ out:
|
|||
if (irqnr) {
|
||||
irqnr = irq_find_mapping(domain, irqnr);
|
||||
handle_IRQ(irqnr, regs);
|
||||
handled_irq = 1;
|
||||
}
|
||||
} while (irqnr);
|
||||
|
||||
/* If an irq is masked or deasserted while active, we will
|
||||
* keep ending up here with no irq handled. So remove it from
|
||||
* the INTC with an ack.*/
|
||||
if (!handled_irq)
|
||||
omap_ack_irq(NULL);
|
||||
}
|
||||
|
||||
asmlinkage void __exception_irq_entry omap2_intc_handle_irq(struct pt_regs *regs)
|
||||
|
|
|
|||
|
|
@ -2541,8 +2541,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_spinlock_sysc = {
|
|||
.sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
|
||||
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
|
||||
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
|
||||
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
|
||||
SIDLE_SMART_WKUP),
|
||||
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
|
||||
.sysc_fields = &omap_hwmod_sysc_type1,
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -103,7 +103,7 @@ static inline void enable_omap3630_toggle_l2_on_restore(void) { }
|
|||
|
||||
#define PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD (1 << 0)
|
||||
|
||||
#if defined(CONFIG_ARCH_OMAP4)
|
||||
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP4)
|
||||
extern u16 pm44xx_errata;
|
||||
#define IS_PM44XX_ERRATUM(id) (pm44xx_errata & (id))
|
||||
#else
|
||||
|
|
|
|||
|
|
@ -30,6 +30,7 @@
|
|||
|
||||
#include <mach/gumstix.h>
|
||||
#include <mach/mfp-pxa25x.h>
|
||||
#include <mach/irqs.h>
|
||||
#include <linux/platform_data/video-pxafb.h>
|
||||
|
||||
#include "generic.h"
|
||||
|
|
|
|||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue