docs: networking: extend the statistics documentation
Make the lack of expectations for switching NICs explicit, describe the new stats. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
parent
e5272ad4aa
commit
f117c48c0d
|
@ -44,8 +44,27 @@ If `-s` is specified once the detailed errors won't be shown.
|
|||
Protocol-specific statistics
|
||||
----------------------------
|
||||
|
||||
Some of the interfaces used for configuring devices are also able
|
||||
to report related statistics. For example ethtool interface used
|
||||
Protocol-specific statistics are exposed via relevant interfaces,
|
||||
the same interfaces as are used to configure them.
|
||||
|
||||
ethtool
|
||||
~~~~~~~
|
||||
|
||||
Ethtool exposes common low-level statistics.
|
||||
All the standard statistics are expected to be maintained
|
||||
by the device, not the driver (as opposed to driver-defined stats
|
||||
described in the next section which mix software and hardware stats).
|
||||
For devices which contain unmanaged
|
||||
switches (e.g. legacy SR-IOV or multi-host NICs) the events counted
|
||||
may not pertain exclusively to the packets destined to
|
||||
the local host interface. In other words the events may
|
||||
be counted at the network port (MAC/PHY blocks) without separation
|
||||
for different host side (PCIe) devices. Such ambiguity must not
|
||||
be present when internal switch is managed by Linux (so called
|
||||
switchdev mode for NICs).
|
||||
|
||||
Standard ethtool statistics can be accessed via the interfaces used
|
||||
for configuration. For example ethtool interface used
|
||||
to configure pause frames can report corresponding hardware counters::
|
||||
|
||||
$ ethtool --include-statistics -a eth0
|
||||
|
@ -57,6 +76,27 @@ to configure pause frames can report corresponding hardware counters::
|
|||
tx_pause_frames: 1
|
||||
rx_pause_frames: 1
|
||||
|
||||
General Ethernet statistics not associated with any particular
|
||||
functionality are exposed via ``ethtool -S $ifc`` by specifying
|
||||
the ``--groups`` parameter::
|
||||
|
||||
$ ethtool -S eth0 --groups eth-phy eth-mac eth-ctrl rmon
|
||||
Stats for eth0:
|
||||
eth-phy-SymbolErrorDuringCarrier: 0
|
||||
eth-mac-FramesTransmittedOK: 1
|
||||
eth-mac-FrameTooLongErrors: 1
|
||||
eth-ctrl-MACControlFramesTransmitted: 1
|
||||
eth-ctrl-MACControlFramesReceived: 0
|
||||
eth-ctrl-UnsupportedOpcodesReceived: 1
|
||||
rmon-etherStatsUndersizePkts: 1
|
||||
rmon-etherStatsJabbers: 0
|
||||
rmon-rx-etherStatsPkts64Octets: 1
|
||||
rmon-rx-etherStatsPkts65to127Octets: 0
|
||||
rmon-rx-etherStatsPkts128to255Octets: 0
|
||||
rmon-tx-etherStatsPkts64Octets: 2
|
||||
rmon-tx-etherStatsPkts65to127Octets: 3
|
||||
rmon-tx-etherStatsPkts128to255Octets: 0
|
||||
|
||||
Driver-defined statistics
|
||||
-------------------------
|
||||
|
||||
|
|
Loading…
Reference in New Issue