From effa4bc4e75a265105f4ccb55857057e5ad231ed Mon Sep 17 00:00:00 2001 From: Matan Barak Date: Tue, 23 Sep 2014 16:05:59 +0300 Subject: [PATCH] net/mlx4_core: Allow not to specify probe_vf in SRIOV IB mode When the HCA is configured in SRIOV IB mode (that is, at least one of the ports is IB) and the probe_vf module param isn't specified, mlx4_init_one() failed because of the following condition: if (ib_ports && (num_vfs_argc > 1 || probe_vfs_argc > 1)) { ..... } The root cause for that is a mistake in the initialization of num_vfs_argc and probe_vfs_argc. When num_vfs / probe_vf aren't given, their argument count counterpart should be 0, fix that. Fixes: dd41cc3bb90e ('net/mlx4: Adapt num_vfs/probed_vf params for single port VF') Signed-off-by: Matan Barak Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 7e2d5d57c598..871e3a5bda38 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -78,13 +78,13 @@ MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero"); #endif /* CONFIG_PCI_MSI */ static uint8_t num_vfs[3] = {0, 0, 0}; -static int num_vfs_argc = 3; +static int num_vfs_argc; module_param_array(num_vfs, byte , &num_vfs_argc, 0444); MODULE_PARM_DESC(num_vfs, "enable #num_vfs functions if num_vfs > 0\n" "num_vfs=port1,port2,port1+2"); static uint8_t probe_vf[3] = {0, 0, 0}; -static int probe_vfs_argc = 3; +static int probe_vfs_argc; module_param_array(probe_vf, byte, &probe_vfs_argc, 0444); MODULE_PARM_DESC(probe_vf, "number of vfs to probe by pf driver (num_vfs > 0)\n" "probe_vf=port1,port2,port1+2");