Merge tag 'mxs-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
From Shawn Guo: It contains mxs device tree changes for 3.12. - New board addition and hogpins cleanup for Crystalfontz - New pinctrl entry addition for lcd, ssp2 and saif0 - Add alias and labels for various nodes - Enable devices like LRADC and USB for a couple of imx23 boards, and backlight for M28EVK * tag 'mxs-dt-3.12' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: dts: mxs: add pin config for LCD sync and clock pins ARM: dts: mxs: add pin config for SSP3 interface ARM: dts: mxs: add another set of saif0_pins (without MCLK) ARM: dts: mxs: add labels to most nodes for easier reference ARM: dts: mxs: whitespace cleanup ARM: dts: mxs: Add spi alias ARM: dts: imx23-olinuxino: enable Low Resolution ADC ARM: dts: imx23-evk: enable Low Resolution ADC ARM: dts: imx23-evk: enable USB PHY and controller ARM: dts: mxs: remove old DMA binding data from client nodes ARM: mxs: Add backlight support for M28EVK ARM: mxs: dt: cfa10036: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10057: remove hogpins ARM: mxs: dt: cfa10055: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10049: make hogpins grabbed by respective drivers ARM: mxs: dt: cfa10037: make hogpins grabbed by respective drivers ARM: mxs: dt: Add Crystalfontz CFA-10058 device tree ARM: mxs: dt: Add Crystalfontz CFA-10056 device tree
This commit is contained in:
Kevin Hilman
Olof Johansson
commit
ef8932b94a
|
|
@ -144,7 +144,9 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
|
|||
imx28-cfa10037.dtb \
|
||||
imx28-cfa10049.dtb \
|
||||
imx28-cfa10055.dtb \
|
||||
imx28-cfa10056.dtb \
|
||||
imx28-cfa10057.dtb \
|
||||
imx28-cfa10058.dtb \
|
||||
imx28-evk.dtb \
|
||||
imx28-m28evk.dtb \
|
||||
imx28-sps1.dtb \
|
||||
|
|
|
|||
|
|
@ -90,6 +90,11 @@
|
|||
};
|
||||
|
||||
apbx@80040000 {
|
||||
lradc@80050000 {
|
||||
status = "okay";
|
||||
fsl,lradc-touchscreen-wires = <4>;
|
||||
};
|
||||
|
||||
pwm: pwm@80064000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm2_pins_a>;
|
||||
|
|
@ -107,6 +112,16 @@
|
|||
pinctrl-0 = <&duart_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usbphy0: usbphy@8007c000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
usb0: usb@80080000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -69,6 +69,10 @@
|
|||
};
|
||||
|
||||
apbx@80040000 {
|
||||
lradc@80050000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
duart: serial@80070000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&duart_pins_a>;
|
||||
|
|
|
|||
|
|
@ -20,6 +20,8 @@
|
|||
gpio2 = &gpio2;
|
||||
serial0 = &auart0;
|
||||
serial1 = &auart1;
|
||||
spi0 = &ssp0;
|
||||
spi1 = &ssp1;
|
||||
};
|
||||
|
||||
cpus {
|
||||
|
|
@ -76,23 +78,21 @@
|
|||
#size-cells = <1>;
|
||||
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
|
||||
reg-names = "gpmi-nand", "bch";
|
||||
interrupts = <13>, <56>;
|
||||
interrupt-names = "gpmi-dma", "bch";
|
||||
interrupts = <56>;
|
||||
interrupt-names = "bch";
|
||||
clocks = <&clks 34>;
|
||||
clock-names = "gpmi_io";
|
||||
dmas = <&dma_apbh 4>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,gpmi-dma-channel = <4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ssp0: ssp@80010000 {
|
||||
reg = <0x80010000 0x2000>;
|
||||
interrupts = <15 14>;
|
||||
interrupts = <15>;
|
||||
clocks = <&clks 33>;
|
||||
dmas = <&dma_apbh 1>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,ssp-dma-channel = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -366,11 +366,10 @@
|
|||
|
||||
ssp1: ssp@80034000 {
|
||||
reg = <0x80034000 0x2000>;
|
||||
interrupts = <2 20>;
|
||||
interrupts = <2>;
|
||||
clocks = <&clks 33>;
|
||||
dmas = <&dma_apbh 2>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,ssp-dma-channel = <2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -472,7 +471,7 @@
|
|||
auart0: serial@8006c000 {
|
||||
compatible = "fsl,imx23-auart";
|
||||
reg = <0x8006c000 0x2000>;
|
||||
interrupts = <24 25 23>;
|
||||
interrupts = <24>;
|
||||
clocks = <&clks 32>;
|
||||
dmas = <&dma_apbx 6>, <&dma_apbx 7>;
|
||||
dma-names = "rx", "tx";
|
||||
|
|
@ -482,7 +481,7 @@
|
|||
auart1: serial@8006e000 {
|
||||
compatible = "fsl,imx23-auart";
|
||||
reg = <0x8006e000 0x2000>;
|
||||
interrupts = <59 60 58>;
|
||||
interrupts = <59>;
|
||||
clocks = <&clks 32>;
|
||||
dmas = <&dma_apbx 8>, <&dma_apbx 9>;
|
||||
dma-names = "rx", "tx";
|
||||
|
|
|
|||
|
|
@ -23,10 +23,7 @@
|
|||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hog_pins_cfa10036>;
|
||||
|
||||
hog_pins_cfa10036: hog-10036@0 {
|
||||
ssd1306_cfa10036: ssd1306-10036@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
|
||||
|
|
@ -83,6 +80,8 @@
|
|||
|
||||
ssd1306: oled@3c {
|
||||
compatible = "solomon,ssd1306fb-i2c";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ssd1306_cfa10036>;
|
||||
reg = <0x3c>;
|
||||
reset-gpios = <&gpio2 7 0>;
|
||||
solomon,height = <32>;
|
||||
|
|
|
|||
|
|
@ -22,13 +22,19 @@
|
|||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default", "default";
|
||||
pinctrl-1 = <&hog_pins_cfa10037>;
|
||||
|
||||
hog_pins_cfa10037: hog-10037@0 {
|
||||
usb_pins_cfa10037: usb-10037@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
mac0_pins_cfa10037: mac0-10037@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
|
|
@ -56,7 +62,8 @@
|
|||
mac0: ethernet@800f0000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac0_pins_a>;
|
||||
pinctrl-0 = <&mac0_pins_a
|
||||
&mac0_pins_cfa10037>;
|
||||
phy-reset-gpios = <&gpio2 21 0>;
|
||||
phy-reset-duration = <100>;
|
||||
status = "okay";
|
||||
|
|
@ -68,6 +75,8 @@
|
|||
|
||||
reg_usb1_vbus: usb1_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_pins_cfa10037>;
|
||||
regulator-name = "usb1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
|
|
|||
|
|
@ -22,32 +22,62 @@
|
|||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default", "default";
|
||||
pinctrl-1 = <&hog_pins_cfa10049
|
||||
&hog_pins_cfa10049_pullup>;
|
||||
|
||||
hog_pins_cfa10049: hog-10049@0 {
|
||||
usb_pins_cfa10049: usb-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
|
||||
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
|
||||
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
|
||||
i2cmux_pins_cfa10049: i2cmux-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
|
||||
0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
mac0_pins_cfa10049: mac0-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
pca_pins_cfa10049: pca-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
rotary_pins_cfa10049: rotary-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
|
||||
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
|
|
@ -60,6 +90,7 @@
|
|||
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
||||
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
||||
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
|
|
@ -120,6 +151,16 @@
|
|||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
w1_gpio_pins: w1-gpio@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
|
|
@ -134,7 +175,8 @@
|
|||
lcdif@80030000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_18bit_pins_cfa10049
|
||||
&lcdif_pins_cfa10049>;
|
||||
&lcdif_pins_cfa10049
|
||||
&lcdif_pins_cfa10049_pullup>;
|
||||
display = <&display>;
|
||||
status = "okay";
|
||||
|
||||
|
|
@ -181,6 +223,8 @@
|
|||
compatible = "i2c-mux-gpio";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2cmux_pins_cfa10049>;
|
||||
mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
|
||||
i2c-parent = <&i2c1>;
|
||||
|
||||
|
|
@ -203,6 +247,8 @@
|
|||
|
||||
pca9555: pca9555@20 {
|
||||
compatible = "nxp,pca9555";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pca_pins_cfa10049>;
|
||||
interrupt-parent = <&gpio2>;
|
||||
interrupts = <19 0x2>;
|
||||
gpio-controller;
|
||||
|
|
@ -239,6 +285,8 @@
|
|||
|
||||
reg_usb1_vbus: usb1_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_pins_cfa10049>;
|
||||
regulator-name = "usb1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
|
@ -250,7 +298,8 @@
|
|||
mac0: ethernet@800f0000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac0_pins_a>;
|
||||
pinctrl-0 = <&mac0_pins_a
|
||||
&mac0_pins_cfa10049>;
|
||||
phy-reset-gpios = <&gpio2 21 0>;
|
||||
phy-reset-duration = <100>;
|
||||
status = "okay";
|
||||
|
|
@ -320,6 +369,8 @@
|
|||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rotary_btn_pins_cfa10049>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
|
|
@ -333,6 +384,8 @@
|
|||
|
||||
rotary {
|
||||
compatible = "rotary-encoder";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rotary_pins_cfa10049>;
|
||||
gpios = <&gpio3 24 1>, <&gpio3 25 1>;
|
||||
linux,axis = <1>; /* REL_Y */
|
||||
rotary-encoder,relative-axis;
|
||||
|
|
|
|||
|
|
@ -23,36 +23,13 @@
|
|||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default", "default";
|
||||
pinctrl-1 = <&hog_pins_cfa10055
|
||||
&hog_pins_cfa10055_pullup>;
|
||||
|
||||
hog_pins_cfa10055: hog-10055@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
spi2_pins_cfa10055: spi2-cfa10055@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
||||
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
||||
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
|
|
@ -98,12 +75,23 @@
|
|||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
lcdif@80030000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_18bit_pins_cfa10055
|
||||
&lcdif_pins_cfa10055>;
|
||||
&lcdif_pins_cfa10055
|
||||
&lcdif_pins_cfa10055_pullup>;
|
||||
display = <&display>;
|
||||
status = "okay";
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,119 @@
|
|||
/*
|
||||
* Copyright 2013 Free Electrons
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/*
|
||||
* The CFA-10055 is an expansion board for the CFA-10036 module and
|
||||
* CFA-10037, thus we need to include the CFA-10037 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10037.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10056 Board";
|
||||
compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
|
||||
|
||||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
spi2_pins_cfa10056: spi2-cfa10056@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
||||
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
||||
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10056: lcdif-10056@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
lcdif@80030000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_24bit_pins_a
|
||||
&lcdif_pins_cfa10056
|
||||
&lcdif_pins_cfa10056_pullup >;
|
||||
display = <&display>;
|
||||
status = "okay";
|
||||
|
||||
display: display {
|
||||
bits-per-pixel = <32>;
|
||||
bus-width = <24>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing0 {
|
||||
clock-frequency = <32000000>;
|
||||
hactive = <480>;
|
||||
vactive = <800>;
|
||||
hback-porch = <2>;
|
||||
hfront-porch = <2>;
|
||||
vback-porch = <2>;
|
||||
vfront-porch = <2>;
|
||||
hsync-len = <5>;
|
||||
vsync-len = <5>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
spi2 {
|
||||
compatible = "spi-gpio";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2_pins_cfa10056>;
|
||||
status = "okay";
|
||||
gpio-sck = <&gpio2 16 0>;
|
||||
gpio-mosi = <&gpio2 17 0>;
|
||||
gpio-miso = <&gpio2 18 0>;
|
||||
cs-gpios = <&gpio3 5 0>;
|
||||
num-chipselects = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hx8369: hx8369@0 {
|
||||
compatible = "himax,hx8369a", "himax,hx8369";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <100000>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
gpios-reset = <&gpio3 30 0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -23,35 +23,16 @@
|
|||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
pinctrl-names = "default", "default";
|
||||
pinctrl-1 = <&hog_pins_cfa10057
|
||||
&hog_pins_cfa10057_pullup>;
|
||||
|
||||
hog_pins_cfa10057: hog-10057@0 {
|
||||
usb_pins_cfa10057: usb-10057@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
|
||||
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
|
||||
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
|
||||
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
|
||||
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
|
|
@ -164,6 +145,8 @@
|
|||
|
||||
reg_usb1_vbus: usb1_vbus {
|
||||
compatible = "regulator-fixed";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_pins_cfa10057>;
|
||||
regulator-name = "usb1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,141 @@
|
|||
/*
|
||||
* Copyright 2013 Crystalfontz America, Inc.
|
||||
* Copyright 2013 Free Electrons
|
||||
*
|
||||
* The code contained herein is licensed under the GNU General Public
|
||||
* License. You may obtain a copy of the GNU General Public License
|
||||
* Version 2 or later at the following locations:
|
||||
*
|
||||
* http://www.opensource.org/licenses/gpl-license.html
|
||||
* http://www.gnu.org/copyleft/gpl.html
|
||||
*/
|
||||
|
||||
/*
|
||||
* The CFA-10058 is an expansion board for the CFA-10036 module, thus we
|
||||
* need to include the CFA-10036 DTS.
|
||||
*/
|
||||
/include/ "imx28-cfa10036.dts"
|
||||
|
||||
/ {
|
||||
model = "Crystalfontz CFA-10058 Board";
|
||||
compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
|
||||
|
||||
apb@80000000 {
|
||||
apbh@80000000 {
|
||||
pinctrl@80018000 {
|
||||
usb_pins_cfa10058: usb-10058@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
lcdif_pins_cfa10058: lcdif-10058@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
lcdif@80030000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcdif_24bit_pins_a
|
||||
&lcdif_pins_cfa10058>;
|
||||
display = <&display>;
|
||||
status = "okay";
|
||||
|
||||
display: display {
|
||||
bits-per-pixel = <32>;
|
||||
bus-width = <24>;
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: timing0 {
|
||||
clock-frequency = <30000000>;
|
||||
hactive = <800>;
|
||||
vactive = <480>;
|
||||
hback-porch = <40>;
|
||||
hfront-porch = <40>;
|
||||
vback-porch = <13>;
|
||||
vfront-porch = <29>;
|
||||
hsync-len = <8>;
|
||||
vsync-len = <8>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
lradc@80050000 {
|
||||
fsl,lradc-touchscreen-wires = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwm: pwm@80064000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm3_pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usbphy1: usbphy@8007e000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
usb1: usb@80090000 {
|
||||
vbus-supply = <®_usb1_vbus>;
|
||||
pinctrl-0 = <&usbphy1_pins_a>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
reg_usb1_vbus: usb1_vbus {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb_pins_cfa10058>;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "usb1_vbus";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio0 7 1>;
|
||||
};
|
||||
};
|
||||
|
||||
ahb@80080000 {
|
||||
mac0: ethernet@800f0000 {
|
||||
phy-mode = "rmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mac0_pins_a>;
|
||||
phy-reset-gpios = <&gpio2 21 0>;
|
||||
phy-reset-duration = <100>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 3 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
};
|
||||
};
|
||||
|
|
@ -235,6 +235,12 @@
|
|||
pinctrl-0 = <&auart2_2pins_b>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pwm: pwm@80064000 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm4_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -270,6 +276,13 @@
|
|||
};
|
||||
};
|
||||
|
||||
backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm 4 5000000>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "simple-bus";
|
||||
|
||||
|
|
|
|||
|
|
@ -15,6 +15,8 @@
|
|||
interrupt-parent = <&icoll>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = &mac0;
|
||||
ethernet1 = &mac1;
|
||||
gpio0 = &gpio0;
|
||||
gpio1 = &gpio1;
|
||||
gpio2 = &gpio2;
|
||||
|
|
@ -27,8 +29,8 @@
|
|||
serial2 = &auart2;
|
||||
serial3 = &auart3;
|
||||
serial4 = &auart4;
|
||||
ethernet0 = &mac0;
|
||||
ethernet1 = &mac1;
|
||||
spi0 = &ssp1;
|
||||
spi1 = &ssp2;
|
||||
};
|
||||
|
||||
cpus {
|
||||
|
|
@ -62,9 +64,9 @@
|
|||
reg = <0x80000000 0x2000>;
|
||||
};
|
||||
|
||||
hsadc@80002000 {
|
||||
hsadc: hsadc@80002000 {
|
||||
reg = <0x80002000 0x2000>;
|
||||
interrupts = <13 87>;
|
||||
interrupts = <13>;
|
||||
dmas = <&dma_apbh 12>;
|
||||
dma-names = "rx";
|
||||
status = "disabled";
|
||||
|
|
@ -86,25 +88,24 @@
|
|||
clocks = <&clks 25>;
|
||||
};
|
||||
|
||||
perfmon@80006000 {
|
||||
perfmon: perfmon@80006000 {
|
||||
reg = <0x80006000 0x800>;
|
||||
interrupts = <27>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpmi-nand@8000c000 {
|
||||
gpmi: gpmi-nand@8000c000 {
|
||||
compatible = "fsl,imx28-gpmi-nand";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
|
||||
reg-names = "gpmi-nand", "bch";
|
||||
interrupts = <88>, <41>;
|
||||
interrupt-names = "gpmi-dma", "bch";
|
||||
interrupts = <41>;
|
||||
interrupt-names = "bch";
|
||||
clocks = <&clks 50>;
|
||||
clock-names = "gpmi_io";
|
||||
dmas = <&dma_apbh 4>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,gpmi-dma-channel = <4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -112,11 +113,10 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x80010000 0x2000>;
|
||||
interrupts = <96 82>;
|
||||
interrupts = <96>;
|
||||
clocks = <&clks 46>;
|
||||
dmas = <&dma_apbh 0>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,ssp-dma-channel = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -124,11 +124,10 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x80012000 0x2000>;
|
||||
interrupts = <97 83>;
|
||||
interrupts = <97>;
|
||||
clocks = <&clks 47>;
|
||||
dmas = <&dma_apbh 1>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,ssp-dma-channel = <1>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -136,11 +135,10 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x80014000 0x2000>;
|
||||
interrupts = <98 84>;
|
||||
interrupts = <98>;
|
||||
clocks = <&clks 48>;
|
||||
dmas = <&dma_apbh 2>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,ssp-dma-channel = <2>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -148,15 +146,14 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x80016000 0x2000>;
|
||||
interrupts = <99 85>;
|
||||
interrupts = <99>;
|
||||
clocks = <&clks 49>;
|
||||
dmas = <&dma_apbh 3>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,ssp-dma-channel = <3>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
pinctrl@80018000 {
|
||||
pinctrl: pinctrl@80018000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "fsl,imx28-pinctrl", "simple-bus";
|
||||
|
|
@ -521,6 +518,18 @@
|
|||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
saif0_pins_b: saif0@1 {
|
||||
reg = <1>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
|
||||
0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
|
||||
0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
|
||||
>;
|
||||
fsl,drive-strength = <2>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
saif1_pins_a: saif1@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
|
|
@ -639,6 +648,19 @@
|
|||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
lcdif_sync_pins_a: lcdif-sync@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||
>;
|
||||
fsl,drive-strength = <0>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
can0_pins_a: can0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
|
|
@ -674,6 +696,21 @@
|
|||
fsl,pull-up = <1>;
|
||||
};
|
||||
|
||||
spi3_pins_a: spi3@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
|
||||
0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
|
||||
0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
|
||||
0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
|
||||
0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
|
||||
0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
|
||||
>;
|
||||
fsl,drive-strength = <1>;
|
||||
fsl,voltage = <1>;
|
||||
fsl,pull-up = <0>;
|
||||
};
|
||||
|
||||
usbphy0_pins_a: usbphy0@0 {
|
||||
reg = <0>;
|
||||
fsl,pinmux-ids = <
|
||||
|
|
@ -705,14 +742,14 @@
|
|||
};
|
||||
};
|
||||
|
||||
digctl@8001c000 {
|
||||
digctl: digctl@8001c000 {
|
||||
compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
|
||||
reg = <0x8001c000 0x2000>;
|
||||
interrupts = <89>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
etm@80022000 {
|
||||
etm: etm@80022000 {
|
||||
reg = <0x80022000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -733,19 +770,19 @@
|
|||
clocks = <&clks 26>;
|
||||
};
|
||||
|
||||
dcp@80028000 {
|
||||
dcp: dcp@80028000 {
|
||||
reg = <0x80028000 0x2000>;
|
||||
interrupts = <52 53 54>;
|
||||
compatible = "fsl-dcp";
|
||||
};
|
||||
|
||||
pxp@8002a000 {
|
||||
pxp: pxp@8002a000 {
|
||||
reg = <0x8002a000 0x2000>;
|
||||
interrupts = <39>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ocotp@8002c000 {
|
||||
ocotp: ocotp@8002c000 {
|
||||
compatible = "fsl,ocotp";
|
||||
reg = <0x8002c000 0x2000>;
|
||||
status = "disabled";
|
||||
|
|
@ -756,10 +793,10 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
lcdif@80030000 {
|
||||
lcdif: lcdif@80030000 {
|
||||
compatible = "fsl,imx28-lcdif";
|
||||
reg = <0x80030000 0x2000>;
|
||||
interrupts = <38 86>;
|
||||
interrupts = <38>;
|
||||
clocks = <&clks 55>;
|
||||
dmas = <&dma_apbh 13>;
|
||||
dma-names = "rx";
|
||||
|
|
@ -784,41 +821,41 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
simdbg@8003c000 {
|
||||
simdbg: simdbg@8003c000 {
|
||||
reg = <0x8003c000 0x200>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
simgpmisel@8003c200 {
|
||||
simgpmisel: simgpmisel@8003c200 {
|
||||
reg = <0x8003c200 0x100>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
simsspsel@8003c300 {
|
||||
simsspsel: simsspsel@8003c300 {
|
||||
reg = <0x8003c300 0x100>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
simmemsel@8003c400 {
|
||||
simmemsel: simmemsel@8003c400 {
|
||||
reg = <0x8003c400 0x100>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpiomon@8003c500 {
|
||||
gpiomon: gpiomon@8003c500 {
|
||||
reg = <0x8003c500 0x100>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
simenet@8003c700 {
|
||||
simenet: simenet@8003c700 {
|
||||
reg = <0x8003c700 0x100>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
armjtag@8003c800 {
|
||||
armjtag: armjtag@8003c800 {
|
||||
reg = <0x8003c800 0x100>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
apbx@80040000 {
|
||||
compatible = "simple-bus";
|
||||
|
|
@ -836,16 +873,15 @@
|
|||
saif0: saif@80042000 {
|
||||
compatible = "fsl,imx28-saif";
|
||||
reg = <0x80042000 0x2000>;
|
||||
interrupts = <59 80>;
|
||||
interrupts = <59>;
|
||||
#clock-cells = <0>;
|
||||
clocks = <&clks 53>;
|
||||
dmas = <&dma_apbx 4>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,saif-dma-channel = <4>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
power@80044000 {
|
||||
power: power@80044000 {
|
||||
reg = <0x80044000 0x2000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -853,15 +889,14 @@
|
|||
saif1: saif@80046000 {
|
||||
compatible = "fsl,imx28-saif";
|
||||
reg = <0x80046000 0x2000>;
|
||||
interrupts = <58 81>;
|
||||
interrupts = <58>;
|
||||
clocks = <&clks 54>;
|
||||
dmas = <&dma_apbx 5>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,saif-dma-channel = <5>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
lradc@80050000 {
|
||||
lradc: lradc@80050000 {
|
||||
compatible = "fsl,imx28-lradc";
|
||||
reg = <0x80050000 0x2000>;
|
||||
interrupts = <10 14 15 16 17 18 19
|
||||
|
|
@ -869,15 +904,15 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
spdif@80054000 {
|
||||
spdif: spdif@80054000 {
|
||||
reg = <0x80054000 0x2000>;
|
||||
interrupts = <45 66>;
|
||||
interrupts = <45>;
|
||||
dmas = <&dma_apbx 2>;
|
||||
dma-names = "tx";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@80056000 {
|
||||
mxs_rtc: rtc@80056000 {
|
||||
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
|
||||
reg = <0x80056000 0x2000>;
|
||||
interrupts = <29>;
|
||||
|
|
@ -888,11 +923,10 @@
|
|||
#size-cells = <0>;
|
||||
compatible = "fsl,imx28-i2c";
|
||||
reg = <0x80058000 0x2000>;
|
||||
interrupts = <111 68>;
|
||||
interrupts = <111>;
|
||||
clock-frequency = <100000>;
|
||||
dmas = <&dma_apbx 6>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,i2c-dma-channel = <6>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -901,11 +935,10 @@
|
|||
#size-cells = <0>;
|
||||
compatible = "fsl,imx28-i2c";
|
||||
reg = <0x8005a000 0x2000>;
|
||||
interrupts = <110 69>;
|
||||
interrupts = <110>;
|
||||
clock-frequency = <100000>;
|
||||
dmas = <&dma_apbx 7>;
|
||||
dma-names = "rx-tx";
|
||||
fsl,i2c-dma-channel = <7>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -918,7 +951,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
timrot@80068000 {
|
||||
timer: timrot@80068000 {
|
||||
compatible = "fsl,imx28-timrot", "fsl,timrot";
|
||||
reg = <0x80068000 0x2000>;
|
||||
interrupts = <48 49 50 51>;
|
||||
|
|
@ -928,10 +961,9 @@
|
|||
auart0: serial@8006a000 {
|
||||
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
|
||||
reg = <0x8006a000 0x2000>;
|
||||
interrupts = <112 70 71>;
|
||||
interrupts = <112>;
|
||||
dmas = <&dma_apbx 8>, <&dma_apbx 9>;
|
||||
dma-names = "rx", "tx";
|
||||
fsl,auart-dma-channel = <8 9>;
|
||||
clocks = <&clks 45>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -939,7 +971,7 @@
|
|||
auart1: serial@8006c000 {
|
||||
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
|
||||
reg = <0x8006c000 0x2000>;
|
||||
interrupts = <113 72 73>;
|
||||
interrupts = <113>;
|
||||
dmas = <&dma_apbx 10>, <&dma_apbx 11>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&clks 45>;
|
||||
|
|
@ -949,7 +981,7 @@
|
|||
auart2: serial@8006e000 {
|
||||
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
|
||||
reg = <0x8006e000 0x2000>;
|
||||
interrupts = <114 74 75>;
|
||||
interrupts = <114>;
|
||||
dmas = <&dma_apbx 12>, <&dma_apbx 13>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&clks 45>;
|
||||
|
|
@ -959,7 +991,7 @@
|
|||
auart3: serial@80070000 {
|
||||
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
|
||||
reg = <0x80070000 0x2000>;
|
||||
interrupts = <115 76 77>;
|
||||
interrupts = <115>;
|
||||
dmas = <&dma_apbx 14>, <&dma_apbx 15>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&clks 45>;
|
||||
|
|
@ -969,7 +1001,7 @@
|
|||
auart4: serial@80072000 {
|
||||
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
|
||||
reg = <0x80072000 0x2000>;
|
||||
interrupts = <116 78 79>;
|
||||
interrupts = <116>;
|
||||
dmas = <&dma_apbx 0>, <&dma_apbx 1>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&clks 45>;
|
||||
|
|
@ -1026,7 +1058,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
dflpt@800c0000 {
|
||||
dflpt: dflpt@800c0000 {
|
||||
reg = <0x800c0000 0x10000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -1049,10 +1081,9 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
switch@800f8000 {
|
||||
etn_switch: switch@800f8000 {
|
||||
reg = <0x800f8000 0x8000>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
|
|
|||
Loading…
Reference in New Issue