dt-bindings: spi: Convert stm32 spi bindings to json-schema
Convert the STM32 spi binding to DT schema format using json-schema Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com> CC: Erwan Leray <erwan.leray@st.com> CC: Fabrice Gasnier <fabrice.gasnier@st.com> CC: Amelie Delaunay <amelie.delaunay@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20191217090715.13334-1-benjamin.gaignard@st.com Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Benjamin Gaignard
Mark Brown
parent
f4dc4abdce
commit
ef32b63bf1
|
|
@ -1,62 +0,0 @@
|
|||
STMicroelectronics STM32 SPI Controller
|
||||
|
||||
The STM32 SPI controller is used to communicate with external devices using
|
||||
the Serial Peripheral Interface. It supports full-duplex, half-duplex and
|
||||
simplex synchronous serial communication with external devices. It supports
|
||||
from 4 to 32-bit data size. Although it can be configured as master or slave,
|
||||
only master is supported by the driver.
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be one of:
|
||||
"st,stm32h7-spi"
|
||||
"st,stm32f4-spi"
|
||||
- reg: Offset and length of the device's register set.
|
||||
- interrupts: Must contain the interrupt id.
|
||||
- clocks: Must contain an entry for spiclk (which feeds the internal clock
|
||||
generator).
|
||||
- #address-cells: Number of cells required to define a chip select address.
|
||||
- #size-cells: Should be zero.
|
||||
|
||||
Optional properties:
|
||||
- resets: Must contain the phandle to the reset controller.
|
||||
- A pinctrl state named "default" may be defined to set pins in mode of
|
||||
operation for SPI transfer.
|
||||
- dmas: DMA specifiers for tx and rx dma. DMA fifo mode must be used. See the
|
||||
STM32 DMA bindings, Documentation/devicetree/bindings/dma/stm32-dma.txt.
|
||||
- dma-names: DMA request names should include "tx" and "rx" if present.
|
||||
- cs-gpios: list of GPIO chip selects. See the SPI bus bindings,
|
||||
Documentation/devicetree/bindings/spi/spi-bus.txt
|
||||
|
||||
|
||||
Child nodes represent devices on the SPI bus
|
||||
See ../spi/spi-bus.txt
|
||||
|
||||
Optional properties:
|
||||
- st,spi-midi-ns: Only for STM32H7, (Master Inter-Data Idleness) minimum time
|
||||
delay in nanoseconds inserted between two consecutive data
|
||||
frames.
|
||||
|
||||
|
||||
Example:
|
||||
spi2: spi@40003800 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32h7-spi";
|
||||
reg = <0x40003800 0x400>;
|
||||
interrupts = <36>;
|
||||
clocks = <&rcc SPI2_CK>;
|
||||
resets = <&rcc 1166>;
|
||||
dmas = <&dmamux1 0 39 0x400 0x01>,
|
||||
<&dmamux1 1 40 0x400 0x01>;
|
||||
dma-names = "rx", "tx";
|
||||
pinctrl-0 = <&spi2_pins_b>;
|
||||
pinctrl-names = "default";
|
||||
cs-gpios = <&gpioa 11 0>;
|
||||
|
||||
aardvark@0 {
|
||||
compatible = "totalphase,aardvark";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <4000000>;
|
||||
st,spi-midi-ns = <4000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,105 @@
|
|||
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/spi/st,stm32-spi.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: STMicroelectronics STM32 SPI Controller bindings
|
||||
|
||||
description: |
|
||||
The STM32 SPI controller is used to communicate with external devices using
|
||||
the Serial Peripheral Interface. It supports full-duplex, half-duplex and
|
||||
simplex synchronous serial communication with external devices. It supports
|
||||
from 4 to 32-bit data size.
|
||||
|
||||
maintainers:
|
||||
- Erwan Leray <erwan.leray@st.com>
|
||||
- Fabrice Gasnier <fabrice.gasnier@st.com>
|
||||
|
||||
allOf:
|
||||
- $ref: "spi-controller.yaml#"
|
||||
- if:
|
||||
properties:
|
||||
compatible:
|
||||
contains:
|
||||
const: st,stm32f4-spi
|
||||
|
||||
then:
|
||||
properties:
|
||||
st,spi-midi-ns: false
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
enum:
|
||||
- st,stm32f4-spi
|
||||
- st,stm32h7-spi
|
||||
|
||||
reg:
|
||||
maxItems: 1
|
||||
|
||||
clocks:
|
||||
maxItems: 1
|
||||
|
||||
interrupts:
|
||||
maxItems: 1
|
||||
|
||||
resets:
|
||||
maxItems: 1
|
||||
|
||||
dmas:
|
||||
description: |
|
||||
DMA specifiers for tx and rx dma. DMA fifo mode must be used. See
|
||||
the STM32 DMA bindings Documentation/devicetree/bindings/dma/stm32-dma.txt.
|
||||
items:
|
||||
- description: rx DMA channel
|
||||
- description: tx DMA channel
|
||||
|
||||
dma-names:
|
||||
items:
|
||||
- const: rx
|
||||
- const: tx
|
||||
|
||||
patternProperties:
|
||||
"^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-f]+$":
|
||||
type: object
|
||||
# SPI slave nodes must be children of the SPI master node and can
|
||||
# contain the following properties.
|
||||
properties:
|
||||
st,spi-midi-ns:
|
||||
description: |
|
||||
Only for STM32H7, (Master Inter-Data Idleness) minimum time
|
||||
delay in nanoseconds inserted between two consecutive data frames.
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- reg
|
||||
- clocks
|
||||
- interrupts
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/stm32mp1-clks.h>
|
||||
#include <dt-bindings/reset/stm32mp1-resets.h>
|
||||
spi@4000b000 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
compatible = "st,stm32h7-spi";
|
||||
reg = <0x4000b000 0x400>;
|
||||
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&rcc SPI2_K>;
|
||||
resets = <&rcc SPI2_R>;
|
||||
dmas = <&dmamux1 0 39 0x400 0x05>,
|
||||
<&dmamux1 1 40 0x400 0x05>;
|
||||
dma-names = "rx", "tx";
|
||||
cs-gpios = <&gpioa 11 0>;
|
||||
|
||||
aardvark@0 {
|
||||
compatible = "totalphase,aardvark";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <4000000>;
|
||||
st,spi-midi-ns = <4000>;
|
||||
};
|
||||
};
|
||||
|
||||
...
|
||||
Loading…
Reference in New Issue