From 269e4a4122685d0739f0e8e53b440111bf8a03f9 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 4 Sep 2013 13:37:43 +0300 Subject: [PATCH 001/125] spi/pxa2xx: check status register as well to determine if the device is off The current interrupt handler calls pm_runtime_suspended() to check if the device is suspended or not. However, runtime PM status of the device is only set to suspended once all PM runtime suspend hooks have executed. In case of Intel Lynxpoint we have the device bound to the ACPI power domain and its runtime suspend hook will put the device to D3hot (or D3cold if possible). This means that the device is powered off before its state is set to runtime suspended. While in this state the device might get an interrupt that is meant for another device (as the interrupt line is shared), and because the device is powered off accessing its registers will return 0xffffffff that the driver misinterprets as an invalid state. When this happens user will see messages like below on the console: pxa2xx-spi INT33C0:00: bad message state in interrupt handler Fix this by checking the status register for ~0 and returning IRQ_NONE in that case. Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2eb06ee0b326..c1a50674c1e3 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -546,8 +546,17 @@ static irqreturn_t ssp_int(int irq, void *dev_id) if (pm_runtime_suspended(&drv_data->pdev->dev)) return IRQ_NONE; - sccr1_reg = read_SSCR1(reg); + /* + * If the device is not yet in RPM suspended state and we get an + * interrupt that is meant for another device, check if status bits + * are all set to one. That means that the device is already + * powered off. + */ status = read_SSSR(reg); + if (status == ~0) + return IRQ_NONE; + + sccr1_reg = read_SSCR1(reg); /* Ignore possible writes if we don't need to write */ if (!(sccr1_reg & SSCR1_TIE)) From 9b4003a687abcf2fe25ba9073dd07345e4529183 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 10 Sep 2013 10:19:29 +0800 Subject: [PATCH 002/125] spi: clps711x: Don't call kfree() after spi_master_put/spi_unregister_master Calling kfree() to clean up the memory obtained from spi_alloc_master() is wrong as this is done in spi_master_release() when spi_master->dev's refcount reaches zero. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index 5655acf55bfe..b597a92565dc 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -247,7 +247,6 @@ err_out: gpio_free(hw->chipselect[i]); spi_master_put(master); - kfree(master); return ret; } @@ -263,7 +262,6 @@ static int spi_clps711x_remove(struct platform_device *pdev) gpio_free(hw->chipselect[i]); spi_unregister_master(master); - kfree(master); return 0; } From eadf69cf5e1cdd042fb7b7beeffa538a935373cd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 19:15:39 +0800 Subject: [PATCH 003/125] spi: mpc512x: fix error return code in mpc512x_psc_spi_do_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mpc512x-psc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index dbc5e999a1f5..6adf4e35816d 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -522,8 +522,10 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, psc_num = master->bus_num; snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num); clk = devm_clk_get(dev, clk_name); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); goto free_irq; + } ret = clk_prepare_enable(clk); if (ret) goto free_irq; From 272bfbd54f29b9361b09dbd6b25ccbd1a30163f1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 19:15:08 +0800 Subject: [PATCH 004/125] spi: fix return value check in dspi_probe() In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 6cd07d13ecab..4e44575bd87a 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -476,15 +476,9 @@ static int dspi_probe(struct platform_device *pdev) master->bus_num = bus_num; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get platform resource\n"); - ret = -EINVAL; - goto out_master_put; - } - dspi->base = devm_ioremap_resource(&pdev->dev, res); - if (!dspi->base) { - ret = -EINVAL; + if (IS_ERR(dspi->base)) { + ret = PTR_ERR(dspi->base); goto out_master_put; } From 9c12a831d73dd938a22418d70b39aed4feb4bdf2 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 16 Sep 2013 08:24:26 -0400 Subject: [PATCH 005/125] ext4: fix performance regression in writeback of random writes The Linux Kernel Performance project guys have reported that commit 4e7ea81db5 introduces a performance regression for the following fio workload: [global] direct=0 ioengine=mmap size=1500M bs=4k pre_read=1 numjobs=1 overwrite=1 loops=5 runtime=300 group_reporting invalidate=0 directory=/mnt/ file_service_type=random:36 file_service_type=random:36 [job0] startdelay=0 rw=randrw filename=data0/f1:data0/f2 [job1] startdelay=0 rw=randrw filename=data0/f2:data0/f1 ... [job7] startdelay=0 rw=randrw filename=data0/f2:data0/f1 The culprit of the problem is that after the commit ext4_writepages() are more aggressive in writing back pages. Thus we have less consecutive dirty pages resulting in more seeking. This increased aggressivity is caused by a bug in the condition terminating ext4_writepages(). We start writing from the beginning of the file even if we should have terminated ext4_writepages() because wbc->nr_to_write <= 0. After fixing the condition the throughput of the fio workload is about 20% better than before writeback reorganization. Reported-by: "Yan, Zheng" Signed-off-by: Jan Kara Signed-off-by: "Theodore Ts'o" --- fs/ext4/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 9115f2807515..4cf2619f007c 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2559,7 +2559,7 @@ retry: break; } blk_finish_plug(&plug); - if (!ret && !cycled) { + if (!ret && !cycled && wbc->nr_to_write > 0) { cycled = 1; mpd.last_page = writeback_index - 1; mpd.first_page = 0; From 47d06e532e95b71c0db3839ebdef3fe8812fca2c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 10 Sep 2013 10:52:35 -0400 Subject: [PATCH 006/125] random: run random_int_secret_init() run after all late_initcalls The some platforms (e.g., ARM) initializes their clocks as late_initcalls for some unknown reason. So make sure random_int_secret_init() is run after all of the late_initcalls are run. Cc: stable@vger.kernel.org Signed-off-by: "Theodore Ts'o" --- drivers/char/random.c | 3 +-- include/linux/random.h | 1 + init/main.c | 2 ++ 3 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 0d91fe52f3f5..92e6c67e1ae6 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1462,12 +1462,11 @@ struct ctl_table random_table[] = { static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned; -static int __init random_int_secret_init(void) +int random_int_secret_init(void) { get_random_bytes(random_int_secret, sizeof(random_int_secret)); return 0; } -late_initcall(random_int_secret_init); /* * Get a random word for internal kernel use only. Similar to urandom but diff --git a/include/linux/random.h b/include/linux/random.h index 3b9377d6b7a5..6312dd9ba449 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -17,6 +17,7 @@ extern void add_interrupt_randomness(int irq, int irq_flags); extern void get_random_bytes(void *buf, int nbytes); extern void get_random_bytes_arch(void *buf, int nbytes); void generate_random_uuid(unsigned char uuid_out[16]); +extern int random_int_secret_init(void); #ifndef MODULE extern const struct file_operations random_fops, urandom_fops; diff --git a/init/main.c b/init/main.c index d03d2ec2eacf..586cd3359c02 100644 --- a/init/main.c +++ b/init/main.c @@ -75,6 +75,7 @@ #include #include #include +#include #include #include @@ -778,6 +779,7 @@ static void __init do_basic_setup(void) do_ctors(); usermodehelper_enable(); do_initcalls(); + random_int_secret_init(); } static void __init do_pre_smp_initcalls(void) From 19872d20c890073c5207d9e02bb8f14d451a11eb Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 9 Sep 2013 18:33:54 +0200 Subject: [PATCH 007/125] HID: uhid: allocate static minor udev has this nice feature of creating "dead" /dev/ device-nodes if it finds a devnode: modalias. Once the node is accessed, the kernel automatically loads the module that provides the node. However, this requires udev to know the major:minor code to use for the node. This feature was introduced by: commit 578454ff7eab61d13a26b568f99a89a2c9edc881 Author: Kay Sievers Date: Thu May 20 18:07:20 2010 +0200 driver core: add devname module aliases to allow module on-demand auto-loading However, uhid uses dynamic minor numbers so this doesn't actually work. We need to load uhid to know which minor it's going to use. Hence, allocate a static minor (just like uinput does) and we're good to go. Reported-by: Tom Gundersen Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 3 ++- include/linux/miscdevice.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 5bf2fb785844..93b00d76374c 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -615,7 +615,7 @@ static const struct file_operations uhid_fops = { static struct miscdevice uhid_misc = { .fops = &uhid_fops, - .minor = MISC_DYNAMIC_MINOR, + .minor = UHID_MINOR, .name = UHID_NAME, }; @@ -634,4 +634,5 @@ module_exit(uhid_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Herrmann "); MODULE_DESCRIPTION("User-space I/O driver support for HID subsystem"); +MODULE_ALIAS_MISCDEV(UHID_MINOR); MODULE_ALIAS("devname:" UHID_NAME); diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 09c2300ddb37..cb358355ef43 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -45,6 +45,7 @@ #define MAPPER_CTRL_MINOR 236 #define LOOP_CTRL_MINOR 237 #define VHOST_NET_MINOR 238 +#define UHID_MINOR 239 #define MISC_DYNAMIC_MINOR 255 struct device; From 0158026ccced1ae312233a6a46dc0b6edce3fb6c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 27 Sep 2013 16:21:30 +0800 Subject: [PATCH 008/125] spi/clps711x: drop clk_put for devm_clk_get in spi_clps711x_probe() devm_clk_get() is used so there is no reason to explicitly call clk_put() in probe or remove functions. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index b597a92565dc..6416798828e7 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -226,7 +226,6 @@ static int spi_clps711x_probe(struct platform_device *pdev) dev_name(&pdev->dev), hw); if (ret) { dev_err(&pdev->dev, "Can't request IRQ\n"); - clk_put(hw->spi_clk); goto clk_out; } From 5cb1327172281cadb7ee8c5fa294d7ac8e09b8db Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 16 Sep 2013 17:59:20 -0700 Subject: [PATCH 009/125] mtd: nand: fix memory leak in ONFI extended parameter page This fixes a memory leak in the ONFI support code for detecting the required ECC levels from this commit: commit 6dcbe0cdd83fb5f77be4f44c9e06c535281c375a Author: Huang Shijie Date: Wed May 22 10:28:27 2013 +0800 mtd: get the ECC info from the Extended Parameter Page In the success case, we never freed the 'ep' buffer. Also, this fixes an oversight in the same commit where we (harmlessly) freed the NULL pointer. Signed-off-by: Brian Norris Acked-by: Huang Shijie Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7ed4841327f2..d340b2f198c6 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2869,10 +2869,8 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, len = le16_to_cpu(p->ext_param_page_length) * 16; ep = kmalloc(len, GFP_KERNEL); - if (!ep) { - ret = -ENOMEM; - goto ext_out; - } + if (!ep) + return -ENOMEM; /* Send our own NAND_CMD_PARAM. */ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); @@ -2920,7 +2918,7 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, } pr_info("ONFI extended param page detected.\n"); - return 0; + ret = 0; ext_out: kfree(ep); From 2b468ef0e7959b703626b64c4d264ef822c9267a Mon Sep 17 00:00:00 2001 From: Elie De Brauwer Date: Tue, 17 Sep 2013 19:48:22 +0200 Subject: [PATCH 010/125] mtd: m25p80: Fix 4 byte addressing mode for Micron devices. According to the datasheet for Micron n25q256a (N25Q256A13ESF40F) 4-byte addressing mode should be entered as follows: To enter or exit the 4-byte address mode, the WRITE ENABLE command must be executed to set the write enable latch bit to 1. (Note: The WRITE ENABLE command must NOT be executed on the N25Q256A83ESF40x and N25Q256A83E1240x devices.) S# must be driven LOW. The effect of the command is immediate; after the command has been executed, the write enable latch bit is cleared to 0. Micron's portable way to perform this for all types of Micron flash is to first issue a write enable, then switch the addressing mode followed by a write disable to avoid leaving the flash in a write- able state. Signed-off-by: Elie De Brauwer [Brian: reworked a bit] Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 26b14f9fcac6..6bc9618af094 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -168,12 +168,25 @@ static inline int write_disable(struct m25p *flash) */ static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) { + int status; + bool need_wren = false; + switch (JEDEC_MFR(jedec_id)) { - case CFI_MFR_MACRONIX: case CFI_MFR_ST: /* Micron, actually */ + /* Some Micron need WREN command; all will accept it */ + need_wren = true; + case CFI_MFR_MACRONIX: case 0xEF /* winbond */: + if (need_wren) + write_enable(flash); + flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; - return spi_write(flash->spi, flash->command, 1); + status = spi_write(flash->spi, flash->command, 1); + + if (need_wren) + write_disable(flash); + + return status; default: /* Spansion style */ flash->command[0] = OPCODE_BRWR; From 3e2bd64d243ff0f3dc08c49ff218fed42ee9d981 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Sep 2013 11:52:35 +0100 Subject: [PATCH 011/125] spi/s3c64xx: Ensure runtime PM is enabled prior to registration Otherwise we may try to start transfers immediately and then fail to runtime resume the device causing us not to have clocks enabled. Signed-off-by: Mark Brown Reviewed-by: Sylwester Nawrocki Conflicts: drivers/spi/spi-s3c64xx.c --- drivers/spi/spi-s3c64xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 512b8893893b..a80376dc3a10 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1428,6 +1428,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN, sdd->regs + S3C64XX_SPI_INT_EN); + pm_runtime_enable(&pdev->dev); + if (spi_register_master(master)) { dev_err(&pdev->dev, "cannot register SPI master\n"); ret = -EBUSY; @@ -1440,8 +1442,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) mem_res, sdd->rx_dma.dmach, sdd->tx_dma.dmach); - pm_runtime_enable(&pdev->dev); - return 0; err3: From b924a69067b00d3121debae5a738fb0bcbbbb03c Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Wed, 25 Sep 2013 12:14:08 +0800 Subject: [PATCH 012/125] tile: include: asm: use 'long long' instead of 'u64' for atomic64_t and its related functions atomic* value is signed value, and atomic* functions need also process signed value (parameter value, and return value), so use 'long long' instead of 'u64'. After replacement, it will also fix a bug for atomic64_add_negative(): "u64 is never less than 0". The modifications are: in vim, use "1,% s/\/long long/g" command. remove redundant '__aligned(8)'. be sure of 80 (and macro '\') columns limitation after replacement. Signed-off-by: Chen Gang Signed-off-by: Chris Metcalf [re-instated const cast] --- arch/tile/include/asm/atomic.h | 5 +++-- arch/tile/include/asm/atomic_32.h | 27 +++++++++++++++------------ arch/tile/include/asm/cmpxchg.h | 28 +++++++++++++++++----------- arch/tile/lib/atomic_32.c | 8 ++++---- 4 files changed, 39 insertions(+), 29 deletions(-) diff --git a/arch/tile/include/asm/atomic.h b/arch/tile/include/asm/atomic.h index d385eaadece7..709798460763 100644 --- a/arch/tile/include/asm/atomic.h +++ b/arch/tile/include/asm/atomic.h @@ -166,7 +166,7 @@ static inline int atomic_cmpxchg(atomic_t *v, int o, int n) * * Atomically sets @v to @i and returns old @v */ -static inline u64 atomic64_xchg(atomic64_t *v, u64 n) +static inline long long atomic64_xchg(atomic64_t *v, long long n) { return xchg64(&v->counter, n); } @@ -180,7 +180,8 @@ static inline u64 atomic64_xchg(atomic64_t *v, u64 n) * Atomically checks if @v holds @o and replaces it with @n if so. * Returns the old value at @v. */ -static inline u64 atomic64_cmpxchg(atomic64_t *v, u64 o, u64 n) +static inline long long atomic64_cmpxchg(atomic64_t *v, long long o, + long long n) { return cmpxchg64(&v->counter, o, n); } diff --git a/arch/tile/include/asm/atomic_32.h b/arch/tile/include/asm/atomic_32.h index 0d0395b1b152..1ad4a1f7d42b 100644 --- a/arch/tile/include/asm/atomic_32.h +++ b/arch/tile/include/asm/atomic_32.h @@ -80,7 +80,7 @@ static inline void atomic_set(atomic_t *v, int n) /* A 64bit atomic type */ typedef struct { - u64 __aligned(8) counter; + long long counter; } atomic64_t; #define ATOMIC64_INIT(val) { (val) } @@ -91,14 +91,14 @@ typedef struct { * * Atomically reads the value of @v. */ -static inline u64 atomic64_read(const atomic64_t *v) +static inline long long atomic64_read(const atomic64_t *v) { /* * Requires an atomic op to read both 32-bit parts consistently. * Casting away const is safe since the atomic support routines * do not write to memory if the value has not been modified. */ - return _atomic64_xchg_add((u64 *)&v->counter, 0); + return _atomic64_xchg_add((long long *)&v->counter, 0); } /** @@ -108,7 +108,7 @@ static inline u64 atomic64_read(const atomic64_t *v) * * Atomically adds @i to @v. */ -static inline void atomic64_add(u64 i, atomic64_t *v) +static inline void atomic64_add(long long i, atomic64_t *v) { _atomic64_xchg_add(&v->counter, i); } @@ -120,7 +120,7 @@ static inline void atomic64_add(u64 i, atomic64_t *v) * * Atomically adds @i to @v and returns @i + @v */ -static inline u64 atomic64_add_return(u64 i, atomic64_t *v) +static inline long long atomic64_add_return(long long i, atomic64_t *v) { smp_mb(); /* barrier for proper semantics */ return _atomic64_xchg_add(&v->counter, i) + i; @@ -135,7 +135,8 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v) * Atomically adds @a to @v, so long as @v was not already @u. * Returns non-zero if @v was not @u, and zero otherwise. */ -static inline u64 atomic64_add_unless(atomic64_t *v, u64 a, u64 u) +static inline long long atomic64_add_unless(atomic64_t *v, long long a, + long long u) { smp_mb(); /* barrier for proper semantics */ return _atomic64_xchg_add_unless(&v->counter, a, u) != u; @@ -151,7 +152,7 @@ static inline u64 atomic64_add_unless(atomic64_t *v, u64 a, u64 u) * atomic64_set() can't be just a raw store, since it would be lost if it * fell between the load and store of one of the other atomic ops. */ -static inline void atomic64_set(atomic64_t *v, u64 n) +static inline void atomic64_set(atomic64_t *v, long long n) { _atomic64_xchg(&v->counter, n); } @@ -236,11 +237,13 @@ extern struct __get_user __atomic_xchg_add_unless(volatile int *p, extern struct __get_user __atomic_or(volatile int *p, int *lock, int n); extern struct __get_user __atomic_andn(volatile int *p, int *lock, int n); extern struct __get_user __atomic_xor(volatile int *p, int *lock, int n); -extern u64 __atomic64_cmpxchg(volatile u64 *p, int *lock, u64 o, u64 n); -extern u64 __atomic64_xchg(volatile u64 *p, int *lock, u64 n); -extern u64 __atomic64_xchg_add(volatile u64 *p, int *lock, u64 n); -extern u64 __atomic64_xchg_add_unless(volatile u64 *p, - int *lock, u64 o, u64 n); +extern long long __atomic64_cmpxchg(volatile long long *p, int *lock, + long long o, long long n); +extern long long __atomic64_xchg(volatile long long *p, int *lock, long long n); +extern long long __atomic64_xchg_add(volatile long long *p, int *lock, + long long n); +extern long long __atomic64_xchg_add_unless(volatile long long *p, + int *lock, long long o, long long n); /* Return failure from the atomic wrappers. */ struct __get_user __atomic_bad_address(int __user *addr); diff --git a/arch/tile/include/asm/cmpxchg.h b/arch/tile/include/asm/cmpxchg.h index 4001d5eab4bb..0ccda3c425be 100644 --- a/arch/tile/include/asm/cmpxchg.h +++ b/arch/tile/include/asm/cmpxchg.h @@ -35,10 +35,10 @@ int _atomic_xchg(int *ptr, int n); int _atomic_xchg_add(int *v, int i); int _atomic_xchg_add_unless(int *v, int a, int u); int _atomic_cmpxchg(int *ptr, int o, int n); -u64 _atomic64_xchg(u64 *v, u64 n); -u64 _atomic64_xchg_add(u64 *v, u64 i); -u64 _atomic64_xchg_add_unless(u64 *v, u64 a, u64 u); -u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); +long long _atomic64_xchg(long long *v, long long n); +long long _atomic64_xchg_add(long long *v, long long i); +long long _atomic64_xchg_add_unless(long long *v, long long a, long long u); +long long _atomic64_cmpxchg(long long *v, long long o, long long n); #define xchg(ptr, n) \ ({ \ @@ -53,7 +53,8 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); if (sizeof(*(ptr)) != 4) \ __cmpxchg_called_with_bad_pointer(); \ smp_mb(); \ - (typeof(*(ptr)))_atomic_cmpxchg((int *)ptr, (int)o, (int)n); \ + (typeof(*(ptr)))_atomic_cmpxchg((int *)ptr, (int)o, \ + (int)n); \ }) #define xchg64(ptr, n) \ @@ -61,7 +62,8 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); if (sizeof(*(ptr)) != 8) \ __xchg_called_with_bad_pointer(); \ smp_mb(); \ - (typeof(*(ptr)))_atomic64_xchg((u64 *)(ptr), (u64)(n)); \ + (typeof(*(ptr)))_atomic64_xchg((long long *)(ptr), \ + (long long)(n)); \ }) #define cmpxchg64(ptr, o, n) \ @@ -69,7 +71,8 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); if (sizeof(*(ptr)) != 8) \ __cmpxchg_called_with_bad_pointer(); \ smp_mb(); \ - (typeof(*(ptr)))_atomic64_cmpxchg((u64 *)ptr, (u64)o, (u64)n); \ + (typeof(*(ptr)))_atomic64_cmpxchg((long long *)ptr, \ + (long long)o, (long long)n); \ }) #else @@ -81,10 +84,11 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); switch (sizeof(*(ptr))) { \ case 4: \ __x = (typeof(__x))(unsigned long) \ - __insn_exch4((ptr), (u32)(unsigned long)(n)); \ + __insn_exch4((ptr), \ + (u32)(unsigned long)(n)); \ break; \ case 8: \ - __x = (typeof(__x)) \ + __x = (typeof(__x)) \ __insn_exch((ptr), (unsigned long)(n)); \ break; \ default: \ @@ -103,10 +107,12 @@ u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n); switch (sizeof(*(ptr))) { \ case 4: \ __x = (typeof(__x))(unsigned long) \ - __insn_cmpexch4((ptr), (u32)(unsigned long)(n)); \ + __insn_cmpexch4((ptr), \ + (u32)(unsigned long)(n)); \ break; \ case 8: \ - __x = (typeof(__x))__insn_cmpexch((ptr), (u64)(n)); \ + __x = (typeof(__x))__insn_cmpexch((ptr), \ + (long long)(n)); \ break; \ default: \ __cmpxchg_called_with_bad_pointer(); \ diff --git a/arch/tile/lib/atomic_32.c b/arch/tile/lib/atomic_32.c index 759efa337be8..c89b211fd9e7 100644 --- a/arch/tile/lib/atomic_32.c +++ b/arch/tile/lib/atomic_32.c @@ -107,19 +107,19 @@ unsigned long _atomic_xor(volatile unsigned long *p, unsigned long mask) EXPORT_SYMBOL(_atomic_xor); -u64 _atomic64_xchg(u64 *v, u64 n) +long long _atomic64_xchg(long long *v, long long n) { return __atomic64_xchg(v, __atomic_setup(v), n); } EXPORT_SYMBOL(_atomic64_xchg); -u64 _atomic64_xchg_add(u64 *v, u64 i) +long long _atomic64_xchg_add(long long *v, long long i) { return __atomic64_xchg_add(v, __atomic_setup(v), i); } EXPORT_SYMBOL(_atomic64_xchg_add); -u64 _atomic64_xchg_add_unless(u64 *v, u64 a, u64 u) +long long _atomic64_xchg_add_unless(long long *v, long long a, long long u) { /* * Note: argument order is switched here since it is easier @@ -130,7 +130,7 @@ u64 _atomic64_xchg_add_unless(u64 *v, u64 a, u64 u) } EXPORT_SYMBOL(_atomic64_xchg_add_unless); -u64 _atomic64_cmpxchg(u64 *v, u64 o, u64 n) +long long _atomic64_cmpxchg(long long *v, long long o, long long n) { return __atomic64_cmpxchg(v, __atomic_setup(v), o, n); } From dd386e03d9753889dc3ea3eed91ad3729df08819 Mon Sep 17 00:00:00 2001 From: Henrik Austad Date: Wed, 25 Sep 2013 16:16:40 +0200 Subject: [PATCH 013/125] tile: change lock initalization in hardwall hardwall used __SPIN_LOCK_INITIALIZER directly instead of the preferred __SPIN_LOCK_UNLOCKED. This also has the benefit that it will compile when applying the preempt-rt patch series. Signed-off-by: Henrik Austad Signed-off-by: Chris Metcalf --- arch/tile/kernel/hardwall.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/tile/kernel/hardwall.c b/arch/tile/kernel/hardwall.c index df27a1fd94a3..531f4c365351 100644 --- a/arch/tile/kernel/hardwall.c +++ b/arch/tile/kernel/hardwall.c @@ -66,7 +66,7 @@ static struct hardwall_type hardwall_types[] = { 0, "udn", LIST_HEAD_INIT(hardwall_types[HARDWALL_UDN].list), - __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_UDN].lock), + __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_UDN].lock), NULL }, #ifndef __tilepro__ @@ -77,7 +77,7 @@ static struct hardwall_type hardwall_types[] = { 1, /* disabled pending hypervisor support */ "idn", LIST_HEAD_INIT(hardwall_types[HARDWALL_IDN].list), - __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_IDN].lock), + __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IDN].lock), NULL }, { /* access to user-space IPI */ @@ -87,7 +87,7 @@ static struct hardwall_type hardwall_types[] = { 0, "ipi", LIST_HEAD_INIT(hardwall_types[HARDWALL_IPI].list), - __SPIN_LOCK_INITIALIZER(hardwall_types[HARDWALL_IPI].lock), + __SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IPI].lock), NULL }, #endif From 3f725c5b924e14eb00c58892d21d92100121e5ce Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 26 Sep 2013 13:22:40 -0400 Subject: [PATCH 014/125] tile: ensure interrupts disabled for preempt_schedule_irq() When coming from a page fault (for example), interrupts might be enabled as we enter the code to return from interrupt. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf --- arch/tile/kernel/intvec_32.S | 3 +++ arch/tile/kernel/intvec_64.S | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/tile/kernel/intvec_32.S b/arch/tile/kernel/intvec_32.S index 088d5c141e68..2cbe6d5dd6b0 100644 --- a/arch/tile/kernel/intvec_32.S +++ b/arch/tile/kernel/intvec_32.S @@ -815,6 +815,9 @@ STD_ENTRY(interrupt_return) } bzt r28, 1f bnz r29, 1f + /* Disable interrupts explicitly for preemption. */ + IRQ_DISABLE(r20,r21) + TRACE_IRQS_OFF jal preempt_schedule_irq FEEDBACK_REENTER(interrupt_return) 1: diff --git a/arch/tile/kernel/intvec_64.S b/arch/tile/kernel/intvec_64.S index ec755d3f3734..b8fc497f2437 100644 --- a/arch/tile/kernel/intvec_64.S +++ b/arch/tile/kernel/intvec_64.S @@ -841,6 +841,9 @@ STD_ENTRY(interrupt_return) } beqzt r28, 1f bnez r29, 1f + /* Disable interrupts explicitly for preemption. */ + IRQ_DISABLE(r20,r21) + TRACE_IRQS_OFF jal preempt_schedule_irq FEEDBACK_REENTER(interrupt_return) 1: From 550dbf47819239c7ceb27bbd9879e2feb0633aab Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Sat, 28 Sep 2013 05:57:46 +0200 Subject: [PATCH 015/125] HID: roccat: Fix "cannot create duplicate filename" problems Fixing some wrong macro stringification/concatenation. Acked-by: Greg Kroah-Hartman Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 2 +- drivers/hid/hid-roccat-koneplus.c | 4 ++-- drivers/hid/hid-roccat-kovaplus.c | 4 ++-- drivers/hid/hid-roccat-pyra.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index 602c188e9d86..6101816a7ddd 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -382,7 +382,7 @@ static ssize_t kone_sysfs_write_profilex(struct file *fp, } #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number = { \ - .attr = { .name = "profile##number", .mode = 0660 }, \ + .attr = { .name = "profile" #number, .mode = 0660 }, \ .size = sizeof(struct kone_profile), \ .read = kone_sysfs_read_profilex, \ .write = kone_sysfs_write_profilex, \ diff --git a/drivers/hid/hid-roccat-koneplus.c b/drivers/hid/hid-roccat-koneplus.c index 5ddf605b6b89..5e99fcdc71b9 100644 --- a/drivers/hid/hid-roccat-koneplus.c +++ b/drivers/hid/hid-roccat-koneplus.c @@ -229,13 +229,13 @@ static ssize_t koneplus_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = KONEPLUS_SIZE_PROFILE_SETTINGS, \ .read = koneplus_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = KONEPLUS_SIZE_PROFILE_BUTTONS, \ .read = koneplus_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ diff --git a/drivers/hid/hid-roccat-kovaplus.c b/drivers/hid/hid-roccat-kovaplus.c index 515bc03136c0..0c8e1ef0b67d 100644 --- a/drivers/hid/hid-roccat-kovaplus.c +++ b/drivers/hid/hid-roccat-kovaplus.c @@ -257,13 +257,13 @@ static ssize_t kovaplus_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS, \ .read = kovaplus_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS, \ .read = kovaplus_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ diff --git a/drivers/hid/hid-roccat-pyra.c b/drivers/hid/hid-roccat-pyra.c index 5a6dbbeee790..1a07e07d99a0 100644 --- a/drivers/hid/hid-roccat-pyra.c +++ b/drivers/hid/hid-roccat-pyra.c @@ -225,13 +225,13 @@ static ssize_t pyra_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = PYRA_SIZE_PROFILE_SETTINGS, \ .read = pyra_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = PYRA_SIZE_PROFILE_BUTTONS, \ .read = pyra_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ From 8f0ba630af45235a6866054704531d49e524e49a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 06:49:20 +0800 Subject: [PATCH 016/125] s390/3270: fix return value check in tty3270_resize_work() In case of error, the function tty3270_alloc_screen() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tty3270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index a0f47c83fd62..3f4ca4e09a4c 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -810,7 +810,7 @@ static void tty3270_resize_work(struct work_struct *work) struct winsize ws; screen = tty3270_alloc_screen(tp->n_rows, tp->n_cols); - if (!screen) + if (IS_ERR(screen)) return; /* Switch to new output size */ spin_lock_bh(&tp->view.lock); From 742343551165f314c740a41b070d0fc7fbe202f7 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 2 Sep 2013 10:22:21 +0200 Subject: [PATCH 017/125] s390/kprobes: add exrl to list of prohibited opcodes "execute relative long" may have all sorts of side effects dependend on the instructions it executes. Therefore prohibit setting a kprobe on exrl just like we do for the regular execute instruction. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/kprobes.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 0ce9fb245034..d86e64eddb42 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -67,6 +67,11 @@ static int __kprobes is_prohibited_opcode(kprobe_opcode_t *insn) case 0xac: /* stnsm */ case 0xad: /* stosm */ return -EINVAL; + case 0xc6: + switch (insn[0] & 0x0f) { + case 0x00: /* exrl */ + return -EINVAL; + } } switch (insn[0]) { case 0x0101: /* pr */ @@ -180,7 +185,6 @@ static int __kprobes is_insn_relative_long(kprobe_opcode_t *insn) break; case 0xc6: switch (insn[0] & 0x0f) { - case 0x00: /* exrl */ case 0x02: /* pfdrl */ case 0x04: /* cghrl */ case 0x05: /* chrl */ From 22bfda6688c9b91393a07887182ec35acc9d06bb Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 17 Sep 2013 13:28:50 +0200 Subject: [PATCH 018/125] s390/sclp: properly detect line mode console To detect a line mode console we need a message event type for the receive mask and a command event type for the send mask. Checking for a MSG event in the sclp send mask was wrong and might result in line mode consoles not being detected. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_cmd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 8cd34bf644b3..77df9cb00688 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -145,9 +145,11 @@ bool __init sclp_has_linemode(void) if (sccb->header.response_code != 0x20) return 0; - if (sccb->sclp_send_mask & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK)) - return 1; - return 0; + if (!(sccb->sclp_send_mask & (EVTYP_OPCMD_MASK | EVTYP_PMSGCMD_MASK))) + return 0; + if (!(sccb->sclp_receive_mask & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK))) + return 0; + return 1; } bool __init sclp_has_vt220(void) From 4d3b0664a0d0c0dc7501cfbd067f74226aeca510 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 27 Sep 2013 15:41:43 +0200 Subject: [PATCH 019/125] s390: Allow vmalloc target buffers for copy_from_oldmem() Currently copy_from_oldmem() is not able to copy to virtual memory. When using kexec pre-allocated ELF header, copy_from_oldmem() is used to copy the ELF notes information to vmalloc buffers. So fix this and use the new function copy_from_realmem() that allows copying also to vmalloc memory. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/crash_dump.c | 42 +++++++++++++++++------------------ 1 file changed, 20 insertions(+), 22 deletions(-) diff --git a/arch/s390/kernel/crash_dump.c b/arch/s390/kernel/crash_dump.c index c84f33d51f7b..7dd21720e5b0 100644 --- a/arch/s390/kernel/crash_dump.c +++ b/arch/s390/kernel/crash_dump.c @@ -40,28 +40,26 @@ static inline void *load_real_addr(void *addr) } /* - * Copy up to one page to vmalloc or real memory + * Copy real to virtual or real memory */ -static ssize_t copy_page_real(void *buf, void *src, size_t csize) +static int copy_from_realmem(void *dest, void *src, size_t count) { - size_t size; + unsigned long size; + int rc; - if (is_vmalloc_addr(buf)) { - BUG_ON(csize >= PAGE_SIZE); - /* If buf is not page aligned, copy first part */ - size = min(roundup(__pa(buf), PAGE_SIZE) - __pa(buf), csize); - if (size) { - if (memcpy_real(load_real_addr(buf), src, size)) - return -EFAULT; - buf += size; - src += size; - } - /* Copy second part */ - size = csize - size; - return (size) ? memcpy_real(load_real_addr(buf), src, size) : 0; - } else { - return memcpy_real(buf, src, csize); - } + if (!count) + return 0; + if (!is_vmalloc_or_module_addr(dest)) + return memcpy_real(dest, src, count); + do { + size = min(count, PAGE_SIZE - (__pa(dest) & ~PAGE_MASK)); + if (memcpy_real(load_real_addr(dest), src, size)) + return -EFAULT; + count -= size; + dest += size; + src += size; + } while (count); + return 0; } /* @@ -114,7 +112,7 @@ static ssize_t copy_oldmem_page_kdump(char *buf, size_t csize, rc = copy_to_user_real((void __force __user *) buf, (void *) src, csize); else - rc = copy_page_real(buf, (void *) src, csize); + rc = copy_from_realmem(buf, (void *) src, csize); return (rc == 0) ? rc : csize; } @@ -210,7 +208,7 @@ int copy_from_oldmem(void *dest, void *src, size_t count) if (OLDMEM_BASE) { if ((unsigned long) src < OLDMEM_SIZE) { copied = min(count, OLDMEM_SIZE - (unsigned long) src); - rc = memcpy_real(dest, src + OLDMEM_BASE, copied); + rc = copy_from_realmem(dest, src + OLDMEM_BASE, copied); if (rc) return rc; } @@ -223,7 +221,7 @@ int copy_from_oldmem(void *dest, void *src, size_t count) return rc; } } - return memcpy_real(dest + copied, src + copied, count - copied); + return copy_from_realmem(dest + copied, src + copied, count - copied); } /* From dbbfe487e5f3fc00c9fe5207d63309859704d12f Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 27 Sep 2013 15:24:38 +0200 Subject: [PATCH 020/125] s390: fix system call restart after inferior call Git commit 616498813b11ffef "s390: system call path micro optimization" introduced a regression in regard to system call restarting and inferior function calls via the ptrace interface. The pointer to the system call table needs to be loaded in sysc_sigpending if do_signal returns with TIF_SYSCALl set after it restored a system call context. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/entry.S | 1 + arch/s390/kernel/entry64.S | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index cc30d1fb000c..0dc2b6d0a1ec 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -266,6 +266,7 @@ sysc_sigpending: tm __TI_flags+3(%r12),_TIF_SYSCALL jno sysc_return lm %r2,%r7,__PT_R2(%r11) # load svc arguments + l %r10,__TI_sysc_table(%r12) # 31 bit system call table xr %r8,%r8 # svc 0 returns -ENOSYS clc __PT_INT_CODE+2(2,%r11),BASED(.Lnr_syscalls+2) jnl sysc_nr_ok # invalid svc number -> do svc 0 diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 2b2188b97c6a..e5b43c97a834 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -297,6 +297,7 @@ sysc_sigpending: tm __TI_flags+7(%r12),_TIF_SYSCALL jno sysc_return lmg %r2,%r7,__PT_R2(%r11) # load svc arguments + lg %r10,__TI_sysc_table(%r12) # address of system call table lghi %r8,0 # svc 0 returns -ENOSYS llgh %r1,__PT_INT_CODE+2(%r11) # load new svc number cghi %r1,NR_syscalls From f862eefec0b68e099a9fa58d3761ffb10bad97e1 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 26 Sep 2013 13:24:53 -0400 Subject: [PATCH 021/125] tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPT It turns out the kernel relies on barrier() to force a reload of the percpu offset value. Since we can't easily modify the definition of barrier() to include "tp" as an output register, we instead provide a definition of __my_cpu_offset as extended assembly that includes a fake stack read to hazard against barrier(), forcing gcc to know that it must reread "tp" and recompute anything based on "tp" after a barrier. This fixes observed hangs in the slub allocator when we are looping on a percpu cmpxchg_double. A similar fix for ARMv7 was made in June in change 509eb76ebf97. Cc: stable@vger.kernel.org Signed-off-by: Chris Metcalf --- arch/tile/include/asm/percpu.h | 34 +++++++++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 3 deletions(-) diff --git a/arch/tile/include/asm/percpu.h b/arch/tile/include/asm/percpu.h index 63294f5a8efb..4f7ae39fa202 100644 --- a/arch/tile/include/asm/percpu.h +++ b/arch/tile/include/asm/percpu.h @@ -15,9 +15,37 @@ #ifndef _ASM_TILE_PERCPU_H #define _ASM_TILE_PERCPU_H -register unsigned long __my_cpu_offset __asm__("tp"); -#define __my_cpu_offset __my_cpu_offset -#define set_my_cpu_offset(tp) (__my_cpu_offset = (tp)) +register unsigned long my_cpu_offset_reg asm("tp"); + +#ifdef CONFIG_PREEMPT +/* + * For full preemption, we can't just use the register variable + * directly, since we need barrier() to hazard against it, causing the + * compiler to reload anything computed from a previous "tp" value. + * But we also don't want to use volatile asm, since we'd like the + * compiler to be able to cache the value across multiple percpu reads. + * So we use a fake stack read as a hazard against barrier(). + * The 'U' constraint is like 'm' but disallows postincrement. + */ +static inline unsigned long __my_cpu_offset(void) +{ + unsigned long tp; + register unsigned long *sp asm("sp"); + asm("move %0, tp" : "=r" (tp) : "U" (*sp)); + return tp; +} +#define __my_cpu_offset __my_cpu_offset() +#else +/* + * We don't need to hazard against barrier() since "tp" doesn't ever + * change with PREEMPT_NONE, and with PREEMPT_VOLUNTARY it only + * changes at function call points, at which we are already re-reading + * the value of "tp" due to "my_cpu_offset_reg" being a global variable. + */ +#define __my_cpu_offset my_cpu_offset_reg +#endif + +#define set_my_cpu_offset(tp) (my_cpu_offset_reg = (tp)) #include From 0cc96a745059e8daf1d7d6a26672f0ad9056e989 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 27 Sep 2013 11:26:30 +0300 Subject: [PATCH 022/125] arch: tile: re-use kbasename() helper kbasename() returns the filename part of a pathname. Signed-off-by: Andy Shevchenko --- arch/tile/kernel/stack.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/tile/kernel/stack.c b/arch/tile/kernel/stack.c index 362284af3afd..c93977a62116 100644 --- a/arch/tile/kernel/stack.c +++ b/arch/tile/kernel/stack.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -332,21 +333,18 @@ static void describe_addr(struct KBacktraceIterator *kbt, } if (vma->vm_file) { - char *s; p = d_path(&vma->vm_file->f_path, buf, bufsize); if (IS_ERR(p)) p = "?"; - s = strrchr(p, '/'); - if (s) - p = s+1; + name = kbasename(p); } else { - p = "anon"; + name = "anon"; } /* Generate a string description of the vma info. */ - namelen = strlen(p); + namelen = strlen(name); remaining = (bufsize - 1) - namelen; - memmove(buf, p, namelen); + memmove(buf, name, namelen); snprintf(buf + namelen, remaining, "[%lx+%lx] ", vma->vm_start, vma->vm_end - vma->vm_start); } From 671952a2a290a90017c64e75b7dd0343b0d005b4 Mon Sep 17 00:00:00 2001 From: Imre Deak Date: Tue, 1 Oct 2013 18:11:26 +0300 Subject: [PATCH 023/125] drm/i915: fix rps.vlv_work initialization During driver loading we are initializing rps.vlv_work in valleyview_enable_rps() via the rps.delayed_resume_work delayed work. This is too late since we are using vlv_work already via i915_driver_load()->intel_uncore_sanitize()-> intel_disable_gt_powersave(). This at least leads to the following kernel warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Fix this by initialzing vlv_work before we call intel_uncore_sanitize(). The regression was introduced in commit 7dcd2677ea912573d9ed4bcd629b0023b2d11505 Author: Konstantin Khlebnikov Date: Wed Jul 17 10:22:58 2013 +0400 drm/i915: fix long-standing SNB regression in power consumption after resume though there was no good reason to initialize the static vlv_work from another delayed work to begin with (especially since this will happen multiple times). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69397 Tested-by: shui yangwei Signed-off-by: Imre Deak Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index dd176b7296c1..73a8efc65615 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3864,8 +3864,6 @@ static void valleyview_enable_rps(struct drm_device *dev) dev_priv->rps.rpe_delay), dev_priv->rps.rpe_delay); - INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work); - valleyview_set_rps(dev_priv->dev, dev_priv->rps.rpe_delay); gen6_enable_rps_interrupts(dev); @@ -5681,5 +5679,7 @@ void intel_pm_init(struct drm_device *dev) INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work, intel_gen6_powersave_work); + + INIT_DELAYED_WORK(&dev_priv->rps.vlv_work, vlv_rps_timer_work); } From 0f5a24c6602063e014ee48892ebf56093241106e Mon Sep 17 00:00:00 2001 From: Manoj Chourasia Date: Tue, 1 Oct 2013 15:39:00 +0530 Subject: [PATCH 024/125] HID: hidraw: close underlying device at removal of last reader Even though device exist bit is set the underlying HW device should be closed when the last reader of the device is closed i.e. open count drops to zero. Signed-off-by: Manoj Chourasia Reported-by: mika.westerberg@linux.intel.com Tested-by: mika.westerberg@linux.intel.com Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 8918dd12bb69..6a6dd5cd7833 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -308,18 +308,25 @@ static int hidraw_fasync(int fd, struct file *file, int on) static void drop_ref(struct hidraw *hidraw, int exists_bit) { if (exists_bit) { - hid_hw_close(hidraw->hid); hidraw->exist = 0; - if (hidraw->open) + if (hidraw->open) { + hid_hw_close(hidraw->hid); wake_up_interruptible(&hidraw->wait); + } } else { --hidraw->open; } - - if (!hidraw->open && !hidraw->exist) { - device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); - hidraw_table[hidraw->minor] = NULL; - kfree(hidraw); + if (!hidraw->open) { + if (!hidraw->exist) { + device_destroy(hidraw_class, + MKDEV(hidraw_major, hidraw->minor)); + hidraw_table[hidraw->minor] = NULL; + kfree(hidraw); + } else { + /* close device for last reader */ + hid_hw_power(hidraw->hid, PM_HINT_NORMAL); + hid_hw_close(hidraw->hid); + } } } From 7da7cbbbeb60e0939fecdf9723b388136c175e5c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Anders=20F=2E=20U=2E=20Ki=C3=A6r?= Date: Tue, 1 Oct 2013 19:22:05 +0200 Subject: [PATCH 025/125] HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGlider MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added id, bindings and comments for Holtek USB ID 04d9:a081 SHARKOON DarkGlider Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a04a. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by: Anders F. U. KiƦr Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-holtek-mouse.c | 4 ++++ drivers/hid/hid-ids.h | 1 + 4 files changed, 7 insertions(+) diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71b70e3a7a71..c91d547191dd 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -241,6 +241,7 @@ config HID_HOLTEK - Sharkoon Drakonia / Perixx MX-2000 gaming mice - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / Zalman ZM-GM1 + - SHARKOON DarkGlider Gaming mouse config HOLTEK_FF bool "Holtek On Line Grip force feedback support" diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b8470b1a10fe..5a8c01112a23 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1715,6 +1715,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_580) }, { HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) }, diff --git a/drivers/hid/hid-holtek-mouse.c b/drivers/hid/hid-holtek-mouse.c index 7e6db3cf46f9..e696566cde46 100644 --- a/drivers/hid/hid-holtek-mouse.c +++ b/drivers/hid/hid-holtek-mouse.c @@ -27,6 +27,7 @@ * - USB ID 04d9:a067, sold as Sharkoon Drakonia and Perixx MX-2000 * - USB ID 04d9:a04a, sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200 * and Zalman ZM-GM1 + * - USB ID 04d9:a081, sold as SHARKOON DarkGlider Gaming mouse */ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -46,6 +47,7 @@ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc, } break; case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A: + case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081: if (*rsize >= 113 && rdesc[106] == 0xff && rdesc[107] == 0x7f && rdesc[111] == 0xff && rdesc[112] == 0x7f) { hid_info(hdev, "Fixing up report descriptor\n"); @@ -63,6 +65,8 @@ static const struct hid_device_id holtek_mouse_devices[] = { USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, + USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { } }; MODULE_DEVICE_TABLE(hid, holtek_mouse_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e60e8d530697..9cbc7ab07dfa 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -450,6 +450,7 @@ #define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD 0xa055 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067 0xa067 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A 0xa04a +#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081 0xa081 #define USB_VENDOR_ID_IMATION 0x0718 #define USB_DEVICE_ID_DISC_STAKKA 0xd000 From a9d14bc0b188a822e42787d01e56c06fe9750162 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 2 Oct 2013 17:49:50 +0200 Subject: [PATCH 026/125] ALSA: snd-usb-usx2y: remove bogus frame checks The frame check in i_usX2Y_urb_complete() and i_usX2Y_usbpcm_urb_complete() is bogus and produces false positives as described in this LAU thread: http://linuxaudio.org/mailarchive/lau/2013/5/20/200177 This patch removes the check code entirely. Cc: fzu@wemgehoertderstaat.de Reported-by: Dr Nicholas J Bailey Suggested-by: Takashi Iwai Signed-off-by: Daniel Mack Cc: Signed-off-by: Takashi Iwai --- sound/usb/usx2y/usbusx2yaudio.c | 22 +++------------------- sound/usb/usx2y/usx2yhwdeppcm.c | 7 +------ 2 files changed, 4 insertions(+), 25 deletions(-) diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c index 63fb5219f0f8..6234a51625b1 100644 --- a/sound/usb/usx2y/usbusx2yaudio.c +++ b/sound/usb/usx2y/usbusx2yaudio.c @@ -299,19 +299,6 @@ static void usX2Y_error_urb_status(struct usX2Ydev *usX2Y, usX2Y_clients_stop(usX2Y); } -static void usX2Y_error_sequence(struct usX2Ydev *usX2Y, - struct snd_usX2Y_substream *subs, struct urb *urb) -{ - snd_printk(KERN_ERR -"Sequence Error!(hcd_frame=%i ep=%i%s;wait=%i,frame=%i).\n" -"Most probably some urb of usb-frame %i is still missing.\n" -"Cause could be too long delays in usb-hcd interrupt handling.\n", - usb_get_current_frame_number(usX2Y->dev), - subs->endpoint, usb_pipein(urb->pipe) ? "in" : "out", - usX2Y->wait_iso_frame, urb->start_frame, usX2Y->wait_iso_frame); - usX2Y_clients_stop(usX2Y); -} - static void i_usX2Y_urb_complete(struct urb *urb) { struct snd_usX2Y_substream *subs = urb->context; @@ -328,12 +315,9 @@ static void i_usX2Y_urb_complete(struct urb *urb) usX2Y_error_urb_status(usX2Y, subs, urb); return; } - if (likely((urb->start_frame & 0xFFFF) == (usX2Y->wait_iso_frame & 0xFFFF))) - subs->completed_urb = urb; - else { - usX2Y_error_sequence(usX2Y, subs, urb); - return; - } + + subs->completed_urb = urb; + { struct snd_usX2Y_substream *capsubs = usX2Y->subs[SNDRV_PCM_STREAM_CAPTURE], *playbacksubs = usX2Y->subs[SNDRV_PCM_STREAM_PLAYBACK]; diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c index f2a1acdc4d83..814d0e887c62 100644 --- a/sound/usb/usx2y/usx2yhwdeppcm.c +++ b/sound/usb/usx2y/usx2yhwdeppcm.c @@ -244,13 +244,8 @@ static void i_usX2Y_usbpcm_urb_complete(struct urb *urb) usX2Y_error_urb_status(usX2Y, subs, urb); return; } - if (likely((urb->start_frame & 0xFFFF) == (usX2Y->wait_iso_frame & 0xFFFF))) - subs->completed_urb = urb; - else { - usX2Y_error_sequence(usX2Y, subs, urb); - return; - } + subs->completed_urb = urb; capsubs = usX2Y->subs[SNDRV_PCM_STREAM_CAPTURE]; capsubs2 = usX2Y->subs[SNDRV_PCM_STREAM_CAPTURE + 2]; playbacksubs = usX2Y->subs[SNDRV_PCM_STREAM_PLAYBACK]; From 19514fc665ffbce624785f76ee7ad0ea6378a527 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 17 Jul 2013 18:05:06 +0200 Subject: [PATCH 027/125] arm, kbuild: make "make install" not depend on vmlinux Install targets (install, zinstall, uinstall) on arm have a dependency to vmlinux. This may cause parts of the kernel to be rebuilt during installation. We must avoid this since this may run as root. Install targets "ABSOLUTELY MUST NOT MODIFY THE SOURCE TREE." as Linus emphasized this in: http://lkml.org/lkml/2013/7/10/600 So on arm and maybe other archs we need the same as for x86: 1648e4f8 x86, kbuild: make "make install" not depend on vmlinux This patch fixes this for arm. Dependencies are removed and instead a check to install.sh is added for the files that are needed. This issue was uncovered by this build error where the -j option is used in conjunction with install targets: $ make $ make zinstall ... DEPMOD Usage: .../scripts/depmod.sh /sbin/depmod (INSTALL_MOD_PATH and INSTALL_PATH variables set, so no root perms required in this case.) The problem is that zinstall on arm due to its dependency to vmlinux does a prepare/prepare3 and finally does a forced rewrite of kernel.release even if it exists already. Rebuilding kernel.release removes it first and then recreates it. This might race with another parallel make job running depmod. So this patch should fix this one too. Also quoting $(KERNELRELEASE) arg for install.sh as this messes argument order in case it is empty (which is the case if the kernel was not built yet). Signed-off-by: Robert Richter Signed-off-by: Robert Richter Acked-by: Michal Marek . Acked-by: Linus Torvalds Signed-off-by: "Yann E. MORIN" Signed-off-by: Michal Marek --- arch/arm/Makefile | 9 +++++++-- arch/arm/boot/Makefile | 16 ++++++++-------- arch/arm/boot/install.sh | 14 ++++++++++++++ 3 files changed, 29 insertions(+), 10 deletions(-) diff --git a/arch/arm/Makefile b/arch/arm/Makefile index a37a50f575a2..db50b626be98 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -296,10 +296,15 @@ archprepare: # Convert bzImage to zImage bzImage: zImage -zImage Image xipImage bootpImage uImage: vmlinux +BOOT_TARGETS = zImage Image xipImage bootpImage uImage +INSTALL_TARGETS = zinstall uinstall install + +PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS) + +$(BOOT_TARGETS): vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -zinstall uinstall install: vmlinux +$(INSTALL_TARGETS): $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ %.dtb: | scripts diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 84aa2caf07ed..ec2f8065f955 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -95,24 +95,24 @@ initrd: @test "$(INITRD)" != "" || \ (echo You must specify INITRD; exit -1) -install: $(obj)/Image - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ +install: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/Image System.map "$(INSTALL_PATH)" -zinstall: $(obj)/zImage - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ +zinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/zImage System.map "$(INSTALL_PATH)" -uinstall: $(obj)/uImage - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ +uinstall: + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/uImage System.map "$(INSTALL_PATH)" zi: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/zImage System.map "$(INSTALL_PATH)" i: - $(CONFIG_SHELL) $(srctree)/$(src)/install.sh $(KERNELRELEASE) \ + $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \ $(obj)/Image System.map "$(INSTALL_PATH)" subdir- := bootp compressed dts diff --git a/arch/arm/boot/install.sh b/arch/arm/boot/install.sh index 06ea7d42ce8e..2a45092a40e3 100644 --- a/arch/arm/boot/install.sh +++ b/arch/arm/boot/install.sh @@ -20,6 +20,20 @@ # $4 - default install path (blank if root directory) # +verify () { + if [ ! -f "$1" ]; then + echo "" 1>&2 + echo " *** Missing file: $1" 1>&2 + echo ' *** You need to run "make" before "make install".' 1>&2 + echo "" 1>&2 + exit 1 + fi +} + +# Make sure the files actually exist +verify "$2" +verify "$3" + # User may have a custom install script if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi From f3fc4884ebe6ae649d3723be14b219230d3b7fd2 Mon Sep 17 00:00:00 2001 From: Francisco Jerez Date: Wed, 2 Oct 2013 15:53:16 -0700 Subject: [PATCH 028/125] drm/i915/hsw: Disable L3 caching of atomic memory operations. Otherwise using any atomic memory operation will lock up the GPU due to a Haswell hardware bug. v2: Use the _MASKED_BIT_ENABLE macro. Drop drm parameter definition. Signed-off-by: Francisco Jerez Reviewed-by: Ben Widawsky Cc: Daniel Vetter Cc: [danvet: Fix checkpatch fail.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 6 ++++++ drivers/gpu/drm/i915/intel_pm.c | 5 +++++ 2 files changed, 11 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index c159e1a6810f..38f96f65d87a 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3881,6 +3881,9 @@ #define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030 #define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) +#define HSW_SCRATCH1 0xb038 +#define HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE (1<<27) + #define HSW_FUSE_STRAP 0x42014 #define HSW_CDCLK_LIMIT (1 << 24) @@ -4728,6 +4731,9 @@ #define GEN7_ROW_CHICKEN2_GT2 0xf4f4 #define DOP_CLOCK_GATING_DISABLE (1<<0) +#define HSW_ROW_CHICKEN3 0xe49c +#define HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE (1 << 6) + #define G4X_AUD_VID_DID (dev_priv->info->display_mmio_offset + 0x62020) #define INTEL_AUDIO_DEVCL 0x808629FB #define INTEL_AUDIO_DEVBLC 0x80862801 diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 73a8efc65615..f4c5e95b2d6f 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4953,6 +4953,11 @@ static void haswell_init_clock_gating(struct drm_device *dev) I915_WRITE(GEN7_L3_CHICKEN_MODE_REGISTER, GEN7_WA_L3_CHICKEN_MODE); + /* L3 caching of data atomics doesn't work -- disable it. */ + I915_WRITE(HSW_SCRATCH1, HSW_SCRATCH1_L3_DATA_ATOMICS_DISABLE); + I915_WRITE(HSW_ROW_CHICKEN3, + _MASKED_BIT_ENABLE(HSW_ROW_CHICKEN3_L3_GLOBAL_ATOMICS_DISABLE)); + /* This is required by WaCatErrorRejectionIssue:hsw */ I915_WRITE(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG, I915_READ(GEN7_SQ_CHICKEN_MBCUNIT_CONFIG) | From 268d76430d1b68c340687357ffd18b4b12d02269 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 3 Oct 2013 02:15:50 -0700 Subject: [PATCH 029/125] spi/hspi: fixup Runtime PM enable timing 3e00a09d2fbd64f0ad98e7c8c29dbf9e038fc746 (spi/hspi: Convert to core runtime PM) enabled master->auto_runtime_pm. Then, pm_runtime_enable() is required *before* spi_register_master() calling. This patch fixed it up. Kernel will hang up with "spi_master spi0: Failed to power device: -13" message without this patch. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- drivers/spi/spi-sh-hspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 0b68cb592fa4..e488a90a98b8 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -296,6 +296,8 @@ static int hspi_probe(struct platform_device *pdev) goto error1; } + pm_runtime_enable(&pdev->dev); + master->num_chipselect = 1; master->bus_num = pdev->id; master->setup = hspi_setup; @@ -309,8 +311,6 @@ static int hspi_probe(struct platform_device *pdev) goto error1; } - pm_runtime_enable(&pdev->dev); - return 0; error1: From 1dc1c33879bf47500565e627506f3d4e150e1cae Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 20 Sep 2013 23:01:06 +0300 Subject: [PATCH 030/125] ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT With DT-based boot, the GPMC OneNAND sync mode setup does not work correctly. During the async mode setup, sync flags gets incorrectly set in the onenand_async data and the system crashes during the async setup. Also, the sync mode never gets set in gpmc_onenand_data->flags, so even without the crash, the actual sync mode setup would never be called. The patch fixes this by adjusting the gpmc_onenand_data->flags when the data is read from the DT. Also while doing this we force the onenand_async to be always async. The patch enables to use the following DTS chunk (that should correspond the arch/arm/mach-omap2/board-rm680.c board file setup) with Nokia N950, which currently crashes with 3.12-rc1. The crash output can be also found below. &gpmc { ranges = <0 0 0x04000000 0x20000000>; onenand@0,0 { #address-cells = <1>; #size-cells = <1>; reg = <0 0 0x20000000>; gpmc,sync-read; gpmc,sync-write; gpmc,burst-length = <16>; gpmc,burst-read; gpmc,burst-wrap; gpmc,burst-write; gpmc,device-width = <2>; gpmc,mux-add-data = <2>; gpmc,cs-on-ns = <0>; gpmc,cs-rd-off-ns = <87>; gpmc,cs-wr-off-ns = <87>; gpmc,adv-on-ns = <0>; gpmc,adv-rd-off-ns = <10>; gpmc,adv-wr-off-ns = <10>; gpmc,oe-on-ns = <15>; gpmc,oe-off-ns = <87>; gpmc,we-on-ns = <0>; gpmc,we-off-ns = <87>; gpmc,rd-cycle-ns = <112>; gpmc,wr-cycle-ns = <112>; gpmc,access-ns = <81>; gpmc,page-burst-access-ns = <15>; gpmc,bus-turnaround-ns = <0>; gpmc,cycle2cycle-delay-ns = <0>; gpmc,wait-monitoring-ns = <0>; gpmc,clk-activation-ns = <5>; gpmc,wr-data-mux-bus-ns = <30>; gpmc,wr-access-ns = <81>; gpmc,sync-clk-ps = <15000>; }; }; [ 1.467559] GPMC CS0: cs_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.474822] GPMC CS0: cs_rd_off : 1 ticks, 5 ns (was 24 ticks) 5 ns [ 1.482116] GPMC CS0: cs_wr_off : 14 ticks, 71 ns (was 24 ticks) 71 ns [ 1.489349] GPMC CS0: adv_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.496582] GPMC CS0: adv_rd_off: 3 ticks, 15 ns (was 3 ticks) 15 ns [ 1.503845] GPMC CS0: adv_wr_off: 3 ticks, 15 ns (was 3 ticks) 15 ns [ 1.511077] GPMC CS0: oe_on : 3 ticks, 15 ns (was 4 ticks) 15 ns [ 1.518310] GPMC CS0: oe_off : 1 ticks, 5 ns (was 24 ticks) 5 ns [ 1.525543] GPMC CS0: we_on : 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.532806] GPMC CS0: we_off : 8 ticks, 40 ns (was 24 ticks) 40 ns [ 1.540039] GPMC CS0: rd_cycle : 4 ticks, 20 ns (was 29 ticks) 20 ns [ 1.547302] GPMC CS0: wr_cycle : 4 ticks, 20 ns (was 29 ticks) 20 ns [ 1.554504] GPMC CS0: access : 0 ticks, 0 ns (was 23 ticks) 0 ns [ 1.561767] GPMC CS0: page_burst_access: 0 ticks, 0 ns (was 3 ticks) 0 ns [ 1.569641] GPMC CS0: bus_turnaround: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.577270] GPMC CS0: cycle2cycle_delay: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.585144] GPMC CS0: wait_monitoring: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.592834] GPMC CS0: clk_activation: 0 ticks, 0 ns (was 0 ticks) 0 ns [ 1.600463] GPMC CS0: wr_data_mux_bus: 5 ticks, 25 ns (was 8 ticks) 25 ns [ 1.608154] GPMC CS0: wr_access : 0 ticks, 0 ns (was 23 ticks) 0 ns [ 1.615386] GPMC CS0 CLK period is 5 ns (div 1) [ 1.625122] Unhandled fault: external abort on non-linefetch (0x1008) at 0xf009e442 [ 1.633178] Internal error: : 1008 [#1] ARM [ 1.637573] Modules linked in: [ 1.640777] CPU: 0 PID: 1 Comm: swapper Not tainted 3.12.0-rc1-n9xx-los.git-5318619-00006-g4baa700-dirty #26 [ 1.651123] task: ef04c000 ti: ef050000 task.ti: ef050000 [ 1.656799] PC is at gpmc_onenand_setup+0x98/0x1e0 [ 1.661865] LR is at gpmc_cs_set_timings+0x494/0x5a4 [ 1.667083] pc : [] lr : [] psr: 60000113 [ 1.667083] sp : ef051d10 ip : ef051ce0 fp : ef051d94 [ 1.679138] r10: c0caaf60 r9 : ef050000 r8 : ef18b32c [ 1.684631] r7 : f0080000 r6 : c0caaf60 r5 : 00000000 r4 : f009e400 [ 1.691497] r3 : f009e442 r2 : 80050000 r1 : 00000014 r0 : 00000000 [ 1.698333] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.706024] Control: 10c5387d Table: af290019 DAC: 00000015 [ 1.712066] Process swapper (pid: 1, stack limit = 0xef050240) [ 1.718200] Stack: (0xef051d10 to 0xef052000) [ 1.722778] 1d00: 00004000 00001402 00000000 00000005 [ 1.731384] 1d20: 00000047 00000000 0000000f 0000000f 00000000 00000028 0000000f 00000005 [ 1.739990] 1d40: 00000000 00000000 00000014 00000014 00000000 00000000 00000000 00000000 [ 1.748596] 1d60: 00000000 00000019 00000000 00000000 ef18b000 ef099c50 c0c8cb30 00000000 [ 1.757171] 1d80: c0488074 c048f868 ef051dcc ef051d98 c024447c c002dfb4 00000000 c048f868 [ 1.765777] 1da0: 00000000 00000000 c010e4a4 c0dbbb7c c0c8cb40 00000000 c0ca2500 c0488074 [ 1.774383] 1dc0: ef051ddc ef051dd0 c01fd508 c0244370 ef051dfc ef051de0 c01fc204 c01fd4f4 [ 1.782989] 1de0: c0c8cb40 c0ca2500 c0c8cb74 00000000 ef051e1c ef051e00 c01fc3b0 c01fc104 [ 1.791595] 1e00: ef0983bc 00000000 c0ca2500 c01fc31c ef051e44 ef051e20 c01fa794 c01fc328 [ 1.800201] 1e20: ef03634c ef0983b0 ef27d534 c0ca2500 ef27d500 c0c9a2f8 ef051e54 ef051e48 [ 1.808807] 1e40: c01fbcfc c01fa744 ef051e84 ef051e58 c01fb838 c01fbce4 c0411df8 c0caa040 [ 1.817413] 1e60: ef051e84 c0ca2500 00000006 c0caa040 00000066 c0488074 ef051e9c ef051e88 [ 1.825988] 1e80: c01fca30 c01fb768 c04975b8 00000006 ef051eac ef051ea0 c01fd728 c01fc9bc [ 1.834594] 1ea0: ef051ebc ef051eb0 c048808c c01fd6e4 ef051f4c ef051ec0 c0008888 c0488080 [ 1.843200] 1ec0: 0000006f c046bae8 00000000 00000000 ef051efc ef051ee0 ef051f04 ef051ee8 [ 1.851806] 1ee0: c046d400 c0181218 c046d410 c18da8d5 c036a8e4 00000066 ef051f4c ef051f08 [ 1.860412] 1f00: c004b9a8 c046d41c c048f840 00000006 00000006 c046b488 00000000 c043ec08 [ 1.869018] 1f20: ef051f4c c04975b8 00000006 c0caa040 00000066 c046d410 c048f85c c048f868 [ 1.877593] 1f40: ef051f94 ef051f50 c046db8c c00087a0 00000006 00000006 c046d410 ffffffff [ 1.886199] 1f60: ffffffff ffffffff ffffffff 00000000 c0348fd0 00000000 00000000 00000000 [ 1.894805] 1f80: 00000000 00000000 ef051fac ef051f98 c0348fe0 c046daa8 00000000 00000000 [ 1.903411] 1fa0: 00000000 ef051fb0 c000e7f8 c0348fdc 00000000 00000000 00000000 00000000 [ 1.912017] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.920623] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 1.929199] Backtrace: [ 1.931793] [] (gpmc_onenand_setup+0x0/0x1e0) from [] (omap2_onenand_probe+0x118/0x49c) [ 1.942047] [] (omap2_onenand_probe+0x0/0x49c) from [] (platform_drv_probe+0x20/0x24) [ 1.952117] r8:c0488074 r7:c0ca2500 r6:00000000 r5:c0c8cb40 r4:c0dbbb7c [ 1.959197] [] (platform_drv_probe+0x0/0x24) from [] (driver_probe_device+0x10c/0x224) [ 1.969360] [] (driver_probe_device+0x0/0x224) from [] (__driver_attach+0x94/0x98) [ 1.979125] r7:00000000 r6:c0c8cb74 r5:c0ca2500 r4:c0c8cb40 [ 1.985107] [] (__driver_attach+0x0/0x98) from [] (bus_for_each_dev+0x5c/0x90) [ 1.994506] r6:c01fc31c r5:c0ca2500 r4:00000000 r3:ef0983bc [ 2.000488] [] (bus_for_each_dev+0x0/0x90) from [] (driver_attach+0x24/0x28) [ 2.009735] r6:c0c9a2f8 r5:ef27d500 r4:c0ca2500 [ 2.014587] [] (driver_attach+0x0/0x28) from [] (bus_add_driver+0xdc/0x260) [ 2.023742] [] (bus_add_driver+0x0/0x260) from [] (driver_register+0x80/0xfc) [ 2.033081] r8:c0488074 r7:00000066 r6:c0caa040 r5:00000006 r4:c0ca2500 [ 2.040161] [] (driver_register+0x0/0xfc) from [] (__platform_driver_register+0x50/0x64) [ 2.050476] r5:00000006 r4:c04975b8 [ 2.054260] [] (__platform_driver_register+0x0/0x64) from [] (omap2_onenand_driver_init+0x18/0x20) [ 2.065490] [] (omap2_onenand_driver_init+0x0/0x20) from [] (do_one_initcall+0xf4/0x150) [ 2.075836] [] (do_one_initcall+0x0/0x150) from [] (kernel_init_freeable+0xf0/0x1b4) [ 2.085815] [] (kernel_init_freeable+0x0/0x1b4) from [] (kernel_init+0x10/0xec) [ 2.095336] [] (kernel_init+0x0/0xec) from [] (ret_from_fork+0x14/0x3c) [ 2.104125] r4:00000000 r3:00000000 [ 2.107879] Code: ebffc3ae e2505000 ba00002e e2843042 (e1d320b0) [ 2.114318] ---[ end trace b8ee3e3e5e002451 ]--- Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc-onenand.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 64b5a8346982..8b6876c98ce1 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -272,9 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; - if (gpmc_onenand_data->of_node) + if (gpmc_onenand_data->of_node) { gpmc_read_settings_dt(gpmc_onenand_data->of_node, &onenand_async); + if (onenand_async.sync_read || onenand_async.sync_write) { + if (onenand_async.sync_write) + gpmc_onenand_data->flags |= + ONENAND_SYNC_READWRITE; + else + gpmc_onenand_data->flags |= ONENAND_SYNC_READ; + onenand_async.sync_read = false; + onenand_async.sync_write = false; + } + } omap2_onenand_set_async_mode(onenand_base); From 0cc4b69960f3d1231023ad5de6cacbc1fbee2a88 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 3 Oct 2013 13:31:26 -0300 Subject: [PATCH 031/125] drm/i915: Mask LPSP to get PSR working even with Power Well in use by audio. Power Well in use forces constantly PSR to exit. On recent Kernel I noticed that PSR Performance Counter was always 0 indicating that PSR was never really achieved. By masking LPSP, PSR can work normally and save power on Haswell. Two bugs had been raised with PSR flag enabled: - "Screen flickers when booted by enabling PSR in the kernel (i915.enable_psr=1) , the system is booting to a gray screen." - "When booting the DUT with PSR feature enabled in the kernel (i915.enable_psr=1) , the system is booting to a gray screen." Both bugs has been fixed by this patch. v2: proper comment for -fixes Tested-by: Selvaraj, Elavarasan Signed-off-by: Rodrigo Vivi Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_dp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 79c14e298ba6..2c555f91bfae 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -1467,7 +1467,7 @@ static void intel_edp_psr_setup(struct intel_dp *intel_dp) /* Avoid continuous PSR exit by masking memup and hpd */ I915_WRITE(EDP_PSR_DEBUG_CTL, EDP_PSR_DEBUG_MASK_MEMUP | - EDP_PSR_DEBUG_MASK_HPD); + EDP_PSR_DEBUG_MASK_HPD | EDP_PSR_DEBUG_MASK_LPSP); intel_dp->psr_setup_done = true; } From c9976dcf55c8aaa7037427b239f15e5acfc01a3a Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sun, 29 Sep 2013 19:15:07 +0100 Subject: [PATCH 032/125] drm/i915: Only apply DPMS to the encoder if enabled The current test for an attached enabled encoder fails if we have multiple connectors aliased to the same encoder - both connectors believe they own the enabled encoder and so we attempt to both enable and disable DPMS on the encoder, leading to hilarity and an OOPs: [ 354.803064] WARNING: CPU: 0 PID: 482 at /usr/src/linux/dist/3.11.2/drivers/gpu/drm/i915/intel_display.c:3869 intel_modeset_check_state+0x764/0x770 [i915]() [ 354.803064] wrong connector dpms state [ 354.803084] Modules linked in: nfsd auth_rpcgss oid_registry exportfs nfs lockd sunrpc xt_nat iptable_nat nf_nat_ipv4 nf_nat xt_limit xt_LOG xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 ipt_REJECT ipv6 xt_recent xt_conntrack nf_conntrack iptable_filter ip_tables x_tables snd_hda_codec_realtek snd_hda_codec_hdmi x86_pkg_temp_thermal snd_hda_intel coretemp kvm_intel snd_hda_codec i915 kvm snd_hwdep snd_pcm_oss snd_mixer_oss crc32_pclmul snd_pcm crc32c_intel e1000e intel_agp igb ghash_clmulni_intel intel_gtt aesni_intel cfbfillrect aes_x86_64 cfbimgblt lrw cfbcopyarea drm_kms_helper ptp video thermal processor gf128mul snd_page_alloc drm snd_timer glue_helper 8250_pci snd pps_core ablk_helper agpgart cryptd sg soundcore fan i2c_algo_bit sr_mod thermal_sys 8250 i2c_i801 serial_core hwmon cdrom i2c_core evdev button [ 354.803086] CPU: 0 PID: 482 Comm: kworker/0:1 Not tainted 3.11.2 #1 [ 354.803087] Hardware name: Supermicro X10SAE/X10SAE, BIOS 1.00 05/03/2013 [ 354.803091] Workqueue: events console_callback [ 354.803092] 0000000000000009 ffff88023611db48 ffffffff814048ac ffff88023611db90 [ 354.803093] ffff88023611db80 ffffffff8103d4e3 ffff880230d82800 ffff880230f9b800 [ 354.803094] ffff880230f99000 ffff880230f99448 ffff8802351c0e00 ffff88023611dbe0 [ 354.803094] Call Trace: [ 354.803098] [] dump_stack+0x54/0x8d [ 354.803101] [] warn_slowpath_common+0x73/0x90 [ 354.803103] [] warn_slowpath_fmt+0x47/0x50 [ 354.803109] [] ? intel_ddi_connector_get_hw_state+0x5e/0x110 [i915] [ 354.803114] [] intel_modeset_check_state+0x764/0x770 [i915] [ 354.803117] [] intel_connector_dpms+0x3b/0x60 [i915] [ 354.803120] [] drm_fb_helper_dpms.isra.11+0x120/0x160 [drm_kms_helper] [ 354.803122] [] drm_fb_helper_blank+0x3e/0x80 [drm_kms_helper] [ 354.803123] [] fb_blank+0x52/0xc0 [ 354.803125] [] fbcon_blank+0x21b/0x2d0 [ 354.803127] [] ? update_rq_clock.part.74+0x13/0x30 [ 354.803129] [] ? lock_timer_base.isra.30+0x26/0x50 [ 354.803130] [] ? internal_add_timer+0x12/0x40 [ 354.803131] [] ? mod_timer+0xf8/0x1c0 [ 354.803133] [] do_unblank_screen+0xa1/0x1c0 [ 354.803134] [] poke_blanked_console+0xc7/0xd0 [ 354.803136] [] console_callback+0x13f/0x160 [ 354.803137] [] process_one_work+0x148/0x3d0 [ 354.803138] [] worker_thread+0x119/0x3a0 [ 354.803140] [] ? manage_workers.isra.30+0x2a0/0x2a0 [ 354.803141] [] kthread+0xbb/0xc0 [ 354.803142] [] ? kthread_create_on_node+0x120/0x120 [ 354.803144] [] ret_from_fork+0x7c/0xb0 [ 354.803145] [] ? kthread_create_on_node+0x120/0x120 This regression goes back to the big modeset rework and the conversion to the new dpms helpers which started with: commit 5ab432ef4997ce32c9406721b37ef6e97e57dae1 Author: Daniel Vetter Date: Sat Jun 30 08:59:56 2012 +0200 drm/i915/hdmi: convert to encoder->disable/enable Fixes: igt/kms_flip/dpms-off-confusion Reported-and-tested-by: Wakko Warner Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68030 Link: http://lkml.kernel.org/r/20130928185023.GA21672@animx.eu.org Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org [danvet: Add regression citation, mention the igt testcase this fixes and slap a cc: stable on the patch.] Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_display.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e5822e79f912..c89abd33124f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3941,8 +3941,6 @@ static void intel_connector_check_state(struct intel_connector *connector) * consider. */ void intel_connector_dpms(struct drm_connector *connector, int mode) { - struct intel_encoder *encoder = intel_attached_encoder(connector); - /* All the simple cases only support two dpms states. */ if (mode != DRM_MODE_DPMS_ON) mode = DRM_MODE_DPMS_OFF; @@ -3953,10 +3951,8 @@ void intel_connector_dpms(struct drm_connector *connector, int mode) connector->dpms = mode; /* Only need to change hw state when actually enabled */ - if (encoder->base.crtc) - intel_encoder_dpms(encoder, mode); - else - WARN_ON(encoder->connectors_active != false); + if (connector->encoder) + intel_encoder_dpms(to_intel_encoder(connector->encoder), mode); intel_modeset_check_state(connector->dev); } From 9886167d20c0720dcfb01e62cdff4d906b226f43 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 3 Oct 2013 16:02:23 +0200 Subject: [PATCH 033/125] perf: Fix perf_pmu_migrate_context While auditing the list_entry usage due to a trinity bug I found that perf_pmu_migrate_context violates the rules for perf_event::event_entry. The problem is that perf_event::event_entry is a RCU list element, and hence we must wait for a full RCU grace period before re-using the element after deletion. Therefore the usage in perf_pmu_migrate_context() which re-uses the entry immediately is broken. For now introduce another list_head into perf_event for this specific usage. This doesn't actually fix the trinity report because that never goes through this code. Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-mkj72lxagw1z8fvjm648iznw@git.kernel.org Signed-off-by: Ingo Molnar --- include/linux/perf_event.h | 24 +++++++++++++++++++++++- kernel/events/core.c | 6 +++--- 2 files changed, 26 insertions(+), 4 deletions(-) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 866e85c5eb94..c8ba627c1d60 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -294,9 +294,31 @@ struct ring_buffer; */ struct perf_event { #ifdef CONFIG_PERF_EVENTS - struct list_head group_entry; + /* + * entry onto perf_event_context::event_list; + * modifications require ctx->lock + * RCU safe iterations. + */ struct list_head event_entry; + + /* + * XXX: group_entry and sibling_list should be mutually exclusive; + * either you're a sibling on a group, or you're the group leader. + * Rework the code to always use the same list element. + * + * Locked for modification by both ctx->mutex and ctx->lock; holding + * either sufficies for read. + */ + struct list_head group_entry; struct list_head sibling_list; + + /* + * We need storage to track the entries in perf_pmu_migrate_context; we + * cannot use the event_entry because of RCU and we want to keep the + * group in tact which avoids us using the other two entries. + */ + struct list_head migrate_entry; + struct hlist_node hlist_entry; int nr_siblings; int group_flags; diff --git a/kernel/events/core.c b/kernel/events/core.c index cb4238e85b38..d49a9d29334c 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -7234,15 +7234,15 @@ void perf_pmu_migrate_context(struct pmu *pmu, int src_cpu, int dst_cpu) perf_remove_from_context(event); unaccount_event_cpu(event, src_cpu); put_ctx(src_ctx); - list_add(&event->event_entry, &events); + list_add(&event->migrate_entry, &events); } mutex_unlock(&src_ctx->mutex); synchronize_rcu(); mutex_lock(&dst_ctx->mutex); - list_for_each_entry_safe(event, tmp, &events, event_entry) { - list_del(&event->event_entry); + list_for_each_entry_safe(event, tmp, &events, migrate_entry) { + list_del(&event->migrate_entry); if (event->state >= PERF_EVENT_STATE_OFF) event->state = PERF_EVENT_STATE_INACTIVE; account_event_cpu(event, dst_cpu); From d8b11a0cbd1c66ce283eb9dabe0498dfa6483f32 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 3 Oct 2013 16:00:14 +0200 Subject: [PATCH 034/125] perf/x86: Clean up cap_user_time* setting Currently the cap_user_time_zero capability has different tests than cap_user_time; even though they expose the exact same data. Switch from CONSTANT && NONSTOP to sched_clock_stable to also deal with multi cabinet machines and drop the tsc_disabled() check.. non of this will work sanely without tsc anyway. Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-nmgn0j0muo1r4c94vlfh23xy@git.kernel.org Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/perf_event.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index 897783b3302a..9d8449158cf9 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1888,10 +1888,7 @@ void arch_perf_update_userpage(struct perf_event_mmap_page *userpg, u64 now) userpg->cap_user_rdpmc = x86_pmu.attr_rdpmc; userpg->pmc_width = x86_pmu.cntval_bits; - if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC)) - return; - - if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) + if (!sched_clock_stable) return; userpg->cap_user_time = 1; @@ -1899,10 +1896,8 @@ void arch_perf_update_userpage(struct perf_event_mmap_page *userpg, u64 now) userpg->time_shift = CYC2NS_SCALE_FACTOR; userpg->time_offset = this_cpu_read(cyc2ns_offset) - now; - if (sched_clock_stable && !check_tsc_disabled()) { - userpg->cap_user_time_zero = 1; - userpg->time_zero = this_cpu_read(cyc2ns_offset); - } + userpg->cap_user_time_zero = 1; + userpg->time_zero = this_cpu_read(cyc2ns_offset); } /* From 0dbc6078c06bc002bfacf95f33960b1901c663f5 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 3 Oct 2013 11:59:14 +0200 Subject: [PATCH 035/125] x86, build, pci: Fix PCI_MSI build on !SMP Commit ebd97be635 ('PCI: remove ARCH_SUPPORTS_MSI kconfig option') removed the ARCH_SUPPORTS_MSI option which architectures could select to indicate that they support MSI. Now, all architectures are supposed to build fine when MSI support is enabled: instead of having the architecture tell *when* MSI support can be used, it's up to the architecture code to ensure that MSI support can be enabled. On x86, commit ebd97be635 removed the following line: select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) Which meant that MSI support was only available when the local APIC and I/O APIC were enabled. While this is always true on SMP or x86-64, it is not necessarily the case on i386 !SMP. The below patch makes sure that the local APIC and I/O APIC support is always enabled when MSI support is enabled. To do so, it: * Ensures the X86_UP_APIC option is not visible when PCI_MSI is enabled. This is the option that allows, on UP machines, to enable or not the APIC support. It is already not visible on SMP systems, or x86-64 systems, for example. We're simply also making it invisible on i386 MSI systems. * Ensures that the X86_LOCAL_APIC and X86_IO_APIC options are 'y' when PCI_MSI is enabled. Notice that this change requires a change in drivers/iommu/Kconfig to avoid a recursive Kconfig dependencey. The AMD_IOMMU option selects PCI_MSI, but was depending on X86_IO_APIC. This dependency is no longer needed: as soon as PCI_MSI is selected, the presence of X86_IO_APIC is guaranteed. Moreover, the AMD_IOMMU already depended on X86_64, which already guaranteed that X86_IO_APIC was enabled, so this dependency was anyway redundant. Signed-off-by: Thomas Petazzoni Link: http://lkml.kernel.org/r/1380794354-9079-1-git-send-email-thomas.petazzoni@free-electrons.com Reported-by: Konrad Rzeszutek Wilk Acked-by: Bjorn Helgaas Signed-off-by: H. Peter Anvin --- arch/x86/Kconfig | 6 +++--- drivers/iommu/Kconfig | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ee2fb9d37745..145d703227bf 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -860,7 +860,7 @@ source "kernel/Kconfig.preempt" config X86_UP_APIC bool "Local APIC support on uniprocessors" - depends on X86_32 && !SMP && !X86_32_NON_STANDARD + depends on X86_32 && !SMP && !X86_32_NON_STANDARD && !PCI_MSI ---help--- A local APIC (Advanced Programmable Interrupt Controller) is an integrated interrupt controller in the CPU. If you have a single-CPU @@ -885,11 +885,11 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC def_bool y - depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI config X86_IO_APIC def_bool y - depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI config X86_VISWS_APIC def_bool y diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index fe302e33f72e..c880ebaf1553 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -52,7 +52,7 @@ config AMD_IOMMU select PCI_PRI select PCI_PASID select IOMMU_API - depends on X86_64 && PCI && ACPI && X86_IO_APIC + depends on X86_64 && PCI && ACPI ---help--- With this option you can enable support for AMD IOMMU hardware in your system. An IOMMU is a hardware component which provides From 6adb0b0ae26fcc35cfec068d71f13863faac5b44 Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 22 Sep 2013 19:44:59 -0600 Subject: [PATCH 036/125] perf tools: Add default handler for mmap2 events Commands that do not implement an mmap2 handler should at least not die with a segfault when processing files with MMAP2 events. Signed-off-by: David Ahern Link: http://lkml.kernel.org/r/1379900700-5186-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/session.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 70ffa41518f3..37c4718f6be1 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -256,6 +256,8 @@ void perf_tool__fill_defaults(struct perf_tool *tool) tool->sample = process_event_sample_stub; if (tool->mmap == NULL) tool->mmap = process_event_stub; + if (tool->mmap2 == NULL) + tool->mmap2 = process_event_stub; if (tool->comm == NULL) tool->comm = process_event_stub; if (tool->fork == NULL) From d20a47e70b57a77f4d1b0dba98a668e14c2f9bf9 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 30 Sep 2013 18:01:11 +0900 Subject: [PATCH 037/125] perf stat: Set child_pid after perf_evlist__prepare_workload() The commit acf2892270dc ("perf stat: Use perf_evlist__prepare/ start_workload()") converted to use the function but forgot to update child_pid. Fix it. Signed-off-by: Namhyung Kim Cc: David Ahern Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/r/1380531671-28076-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index f686d5ff594e..5098f144b92d 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -457,6 +457,7 @@ static int __run_perf_stat(int argc, const char **argv) perror("failed to prepare workload"); return -1; } + child_pid = evsel_list->workload.pid; } if (group) From 47a92b828639dcb1a6033cd0a441099df828b7a9 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 2 Oct 2013 18:25:26 -0300 Subject: [PATCH 038/125] perf tools: Fix libaudit test MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In ubuntu systems the libaudit test was always failing due to the newline in the printf call not being escaped, which somehow didn't prevented the test from working as expected on other systems, such as fedora18. Fix it by removing the newline, as this is just a test, that program is just a compile test. The error messages, obtained using 'make V=1': CHK libaudit : In function ā€˜mainā€™: :5:9: error: missing terminating " character [-Werror] :5:2: error: missing terminating " character :6:1: error: missing terminating " character [-Werror] :6:1: error: missing terminating " character :7:2: error: expected expression before ā€˜returnā€™ :8:1: error: expected ā€˜;ā€™ before ā€˜}ā€™ token cc1: all warnings being treated as errors config/Makefile:241: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev After this change the test works as expected in all systems tested and the 'trace' tool is built when the needed devel packages are installed. Cc: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-0trw8qs9hafeopc0vj1sicay@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/config/feature-tests.mak | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/config/feature-tests.mak b/tools/perf/config/feature-tests.mak index d5a8dd44945f..f79305739ecc 100644 --- a/tools/perf/config/feature-tests.mak +++ b/tools/perf/config/feature-tests.mak @@ -219,7 +219,7 @@ define SOURCE_LIBAUDIT int main(void) { - printf(\"error message: %s\n\", audit_errno_to_name(0)); + printf(\"error message: %s\", audit_errno_to_name(0)); return audit_open(); } endef From e08cfd4bda7683cdbe6971c26cf23e2afdb1e7a8 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Mon, 30 Sep 2013 18:21:44 +0900 Subject: [PATCH 039/125] perf probe: Fix to find line information for probe list Fix to find the correct (as much as possible) line information for listing probes. Without this fix, perf probe --list action will show incorrect line information as below; probe:getname_flags (on getname_flags@ksrc/linux-3/fs/namei.c) probe:getname_flags_1 (on getname:-89@x86/include/asm/current.h) probe:getname_flags_2 (on user_path_at_empty:-2054@x86/include/asm/current.h) The minus line number is obviously wrong, and current.h is not related to the probe point. Deeper investigation discovered that there were 2 issues related to this bug, and minor typos too. The 1st issue is the rack of considering about nested inlined functions, which causes the wrong (relative) line number. The 2nd issue is that the dwarf line info is not correct at those points. It points 14th line of current.h. Since it seems that the line info includes somewhat unreliable information, this fixes perf to try to find correct line information from both of debuginfo and line info as below. 1) Probe address is the entry of a function instance In this case, the line is set as the function declared line. 2) Probe address is the entry of an expanded inline function block In this case, the line is set as the function call-site line. This means that the line number is relative from the entry line of caller function (which can be an inlined function if nested) 3) Probe address is inside a function instance or an expanded inline function block In this case, perf probe queries the line number from lineinfo and verify the function declared file is same as the file name queried from lineinfo. If the file name is different, it is a failure case. The probe address is shown as symbol+offset. 4) Probe address is not in the any function instance This is a failure case, the probe address is shown as symbol+offset. With this fix, perf probe -l shows correct probe lines as below; probe:getname_flags (on getname_flags@ksrc/linux-3/fs/namei.c) probe:getname_flags_1 (on getname:2@ksrc/linux-3/fs/namei.c) probe:getname_flags_2 (on user_path_at_empty:4@ksrc/linux-3/fs/namei.c) Changes at v2: - Fix typos in the function comments. (Thanks to Namhyung Kim) - Use die_find_top_inlinefunc instead of die_find_inlinefunc_next. Signed-off-by: Masami Hiramatsu Cc: Ingo Molnar Cc: Namhyung Kim Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20130930092144.1693.11058.stgit@udc4-manage.rcp.hitachi.co.jp Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/dwarf-aux.c | 27 +++++++++++++++---- tools/perf/util/dwarf-aux.h | 6 ++++- tools/perf/util/probe-finder.c | 49 +++++++++++++++++++++++----------- 3 files changed, 60 insertions(+), 22 deletions(-) diff --git a/tools/perf/util/dwarf-aux.c b/tools/perf/util/dwarf-aux.c index e23bde19d590..7defd77105d0 100644 --- a/tools/perf/util/dwarf-aux.c +++ b/tools/perf/util/dwarf-aux.c @@ -426,7 +426,7 @@ static int __die_search_func_cb(Dwarf_Die *fn_die, void *data) * @die_mem: a buffer for result DIE * * Search a non-inlined function DIE which includes @addr. Stores the - * DIE to @die_mem and returns it if found. Returns NULl if failed. + * DIE to @die_mem and returns it if found. Returns NULL if failed. */ Dwarf_Die *die_find_realfunc(Dwarf_Die *cu_die, Dwarf_Addr addr, Dwarf_Die *die_mem) @@ -454,15 +454,32 @@ static int __die_find_inline_cb(Dwarf_Die *die_mem, void *data) } /** - * die_find_inlinefunc - Search an inlined function at given address - * @cu_die: a CU DIE which including @addr + * die_find_top_inlinefunc - Search the top inlined function at given address + * @sp_die: a subprogram DIE which including @addr * @addr: target address * @die_mem: a buffer for result DIE * * Search an inlined function DIE which includes @addr. Stores the - * DIE to @die_mem and returns it if found. Returns NULl if failed. + * DIE to @die_mem and returns it if found. Returns NULL if failed. + * Even if several inlined functions are expanded recursively, this + * doesn't trace it down, and returns the topmost one. + */ +Dwarf_Die *die_find_top_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, + Dwarf_Die *die_mem) +{ + return die_find_child(sp_die, __die_find_inline_cb, &addr, die_mem); +} + +/** + * die_find_inlinefunc - Search an inlined function at given address + * @sp_die: a subprogram DIE which including @addr + * @addr: target address + * @die_mem: a buffer for result DIE + * + * Search an inlined function DIE which includes @addr. Stores the + * DIE to @die_mem and returns it if found. Returns NULL if failed. * If several inlined functions are expanded recursively, this trace - * it and returns deepest one. + * it down and returns deepest one. */ Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, Dwarf_Die *die_mem) diff --git a/tools/perf/util/dwarf-aux.h b/tools/perf/util/dwarf-aux.h index 8658d41697d2..b4fe90c6cb2d 100644 --- a/tools/perf/util/dwarf-aux.h +++ b/tools/perf/util/dwarf-aux.h @@ -79,7 +79,11 @@ extern Dwarf_Die *die_find_child(Dwarf_Die *rt_die, extern Dwarf_Die *die_find_realfunc(Dwarf_Die *cu_die, Dwarf_Addr addr, Dwarf_Die *die_mem); -/* Search an inlined function including given address */ +/* Search the top inlined function including given address */ +extern Dwarf_Die *die_find_top_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, + Dwarf_Die *die_mem); + +/* Search the deepest inlined function including given address */ extern Dwarf_Die *die_find_inlinefunc(Dwarf_Die *sp_die, Dwarf_Addr addr, Dwarf_Die *die_mem); diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 371476cb8ddc..c09e0a9fdf4c 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -1327,8 +1327,8 @@ int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr, struct perf_probe_point *ppt) { Dwarf_Die cudie, spdie, indie; - Dwarf_Addr _addr, baseaddr; - const char *fname = NULL, *func = NULL, *tmp; + Dwarf_Addr _addr = 0, baseaddr = 0; + const char *fname = NULL, *func = NULL, *basefunc = NULL, *tmp; int baseline = 0, lineno = 0, ret = 0; /* Adjust address with bias */ @@ -1349,27 +1349,36 @@ int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr, /* Find a corresponding function (name, baseline and baseaddr) */ if (die_find_realfunc(&cudie, (Dwarf_Addr)addr, &spdie)) { /* Get function entry information */ - tmp = dwarf_diename(&spdie); - if (!tmp || + func = basefunc = dwarf_diename(&spdie); + if (!func || dwarf_entrypc(&spdie, &baseaddr) != 0 || - dwarf_decl_line(&spdie, &baseline) != 0) + dwarf_decl_line(&spdie, &baseline) != 0) { + lineno = 0; goto post; - func = tmp; + } - if (addr == (unsigned long)baseaddr) + if (addr == (unsigned long)baseaddr) { /* Function entry - Relative line number is 0 */ lineno = baseline; - else if (die_find_inlinefunc(&spdie, (Dwarf_Addr)addr, - &indie)) { + fname = dwarf_decl_file(&spdie); + goto post; + } + + /* Track down the inline functions step by step */ + while (die_find_top_inlinefunc(&spdie, (Dwarf_Addr)addr, + &indie)) { + /* There is an inline function */ if (dwarf_entrypc(&indie, &_addr) == 0 && - _addr == addr) + _addr == addr) { /* * addr is at an inline function entry. * In this case, lineno should be the call-site - * line number. + * line number. (overwrite lineinfo) */ lineno = die_get_call_lineno(&indie); - else { + fname = die_get_call_file(&indie); + break; + } else { /* * addr is in an inline function body. * Since lineno points one of the lines @@ -1377,19 +1386,27 @@ int debuginfo__find_probe_point(struct debuginfo *self, unsigned long addr, * be the entry line of the inline function. */ tmp = dwarf_diename(&indie); - if (tmp && - dwarf_decl_line(&spdie, &baseline) == 0) - func = tmp; + if (!tmp || + dwarf_decl_line(&indie, &baseline) != 0) + break; + func = tmp; + spdie = indie; } } + /* Verify the lineno and baseline are in a same file */ + tmp = dwarf_decl_file(&spdie); + if (!tmp || strcmp(tmp, fname) != 0) + lineno = 0; } post: /* Make a relative line number or an offset */ if (lineno) ppt->line = lineno - baseline; - else if (func) + else if (basefunc) { ppt->offset = addr - (unsigned long)baseaddr; + func = basefunc; + } /* Duplicate strings */ if (func) { From 027a7e86a17fb2d172f4eb17cd6b0e9f139224fd Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 4 Oct 2013 10:24:17 -0300 Subject: [PATCH 040/125] perf tools: Fix installation of libexec components Doing a fresh install on a user home directory needs to first make sure that the ~/libexec/perf-core/ directory is present so that 'perf-archive' like scripts, 'perf test' attr config files and 'perf script' scripts can be installed. Cc: Adrian Hunter Cc: David Ahern Cc: Frederic Weisbecker Cc: Jiri Olsa Cc: Mike Galbraith Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Stephane Eranian Link: http://lkml.kernel.org/n/tip-z7ryi3r1b9dn9smbfnab0fdc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 3a0ff7fb71b6..64c043b7a438 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -770,6 +770,7 @@ check: $(OUTPUT)common-cmds.h install-bin: all $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)' $(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)' + $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' $(INSTALL) $(OUTPUT)perf-archive -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)' ifndef NO_LIBPERL $(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/perl/Perf-Trace-Util/lib/Perf/Trace' From b314e5cfd11fd78545ce6c2be42646254390c1aa Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 30 Sep 2013 17:19:48 +0900 Subject: [PATCH 041/125] perf session: Fix infinite loop on invalid perf.data file perf-record updates the header in the perf.data file at termination. Without this update perf-report (and other processing built-ins) it caused an infinite loop when perf report (or something like) called. This is because the algorithm in __perf_session__process_events() depends on the data_size which is read from file header. Use file size directly instead in this case to do the best-effort processing. Signed-off-by: Namhyung Kim Tested-by: David Ahern Tested-by: Sonny Rao Acked-by: Ingo Molnar Cc: David Ahern Cc: Ingo Molnar Cc: Jiri Olsa Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Sonny Rao Link: http://lkml.kernel.org/r/1380529188-27193-1-git-send-email-namhyung@kernel.org Signed-off-by: David Ahern [ Reworded warning as per Ingo Molnar suggestion, replaces 'perf.data' with session->filename, to precisely identify the data file involved ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 12 ++++++++++++ tools/perf/util/session.c | 2 +- 2 files changed, 13 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index ce69901176d8..c3e5a3b817ab 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -2768,6 +2768,18 @@ int perf_session__read_header(struct perf_session *session) if (perf_file_header__read(&f_header, header, fd) < 0) return -EINVAL; + /* + * Sanity check that perf.data was written cleanly; data size is + * initialized to 0 and updated only if the on_exit function is run. + * If data size is still 0 then the file contains only partial + * information. Just warn user and process it as much as it can. + */ + if (f_header.data.size == 0) { + pr_warning("WARNING: The %s file's data size field is 0 which is unexpected.\n" + "Was the 'perf record' command properly terminated?\n", + session->filename); + } + nr_attrs = f_header.attrs.size / f_header.attr_size; lseek(fd, f_header.attrs.offset, SEEK_SET); diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c index 37c4718f6be1..568b750c01f6 100644 --- a/tools/perf/util/session.c +++ b/tools/perf/util/session.c @@ -1312,7 +1312,7 @@ int __perf_session__process_events(struct perf_session *session, file_offset = page_offset; head = data_offset - page_offset; - if (data_offset + data_size < file_size) + if (data_size && (data_offset + data_size < file_size)) file_size = data_offset + data_size; progress_next = file_size / 16; From 8412da757776727796e9edd64ba94814cc08d536 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 4 Oct 2013 15:16:04 +0300 Subject: [PATCH 042/125] x86/reboot: Add reboot quirk for Dell Latitude E5410 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Dell Latitude E5410 needs reboot=pci to actually reboot. Signed-off-by: Ville SyrjƤlƤ Link: http://lkml.kernel.org/r/1380888964-14517-1-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/reboot.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index e643e744e4d8..7e920bff99a3 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -326,6 +326,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E6320"), }, }, + { /* Handle problems with rebooting on the Latitude E5410. */ + .callback = set_pci_reboot, + .ident = "Dell Latitude E5410", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Latitude E5410"), + }, + }, { /* Handle problems with rebooting on the Latitude E5420. */ .callback = set_pci_reboot, .ident = "Dell Latitude E5420", From 338cae565c53755de9f87d6a801517940d2d56f7 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 7 Oct 2013 10:39:59 +0200 Subject: [PATCH 043/125] ALSA: hda - Fix mono speakers and headset mic on Dell Vostro 5470 On this machine, DAC on node 0x03 seems to give mono output. Also, it needs additional patches for headset mic support. It supports CTIA style headsets only. Alsa-info available at the bug link below. Cc: stable@kernel.org (v3.10+) BugLink: https://bugs.launchpad.net/bugs/1236228 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 0e303b99a47c..52c26d3a61d4 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3496,6 +3496,15 @@ static void alc282_fixup_asus_tx300(struct hda_codec *codec, } } +static void alc290_fixup_mono_speakers(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + if (action == HDA_FIXUP_ACT_PRE_PROBE) + /* Remove DAC node 0x03, as it seems to be + giving mono output */ + snd_hda_override_wcaps(codec, 0x03, 0); +} + enum { ALC269_FIXUP_SONY_VAIO, ALC275_FIXUP_SONY_VAIO_GPIO2, @@ -3522,6 +3531,7 @@ enum { ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT, ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, + ALC269_FIXUP_DELL3_MIC_NO_PRESENCE, ALC269_FIXUP_HEADSET_MODE, ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, ALC269_FIXUP_ASUS_X101_FUNC, @@ -3535,6 +3545,7 @@ enum { ALC283_FIXUP_CHROME_BOOK, ALC282_FIXUP_ASUS_TX300, ALC283_FIXUP_INT_MIC, + ALC290_FIXUP_MONO_SPEAKERS, }; static const struct hda_fixup alc269_fixups[] = { @@ -3712,6 +3723,15 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC }, + [ALC269_FIXUP_DELL3_MIC_NO_PRESENCE] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x1a, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC + }, [ALC269_FIXUP_HEADSET_MODE] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_headset_mode, @@ -3804,6 +3824,12 @@ static const struct hda_fixup alc269_fixups[] = { .chained = true, .chain_id = ALC269_FIXUP_LIMIT_INT_MIC_BOOST }, + [ALC290_FIXUP_MONO_SPEAKERS] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc290_fixup_mono_speakers, + .chained = true, + .chain_id = ALC269_FIXUP_DELL3_MIC_NO_PRESENCE, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -3845,6 +3871,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x0608, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0609, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x0613, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE), + SND_PCI_QUIRK(0x1028, 0x0616, "Dell Vostro 5470", ALC290_FIXUP_MONO_SPEAKERS), SND_PCI_QUIRK(0x1028, 0x15cc, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x15cd, "Dell X5 Precision", ALC269_FIXUP_DELL2_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2), From de8cc234a517b61c9a8450a34408dbae53aa171f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 10 Sep 2013 17:06:26 +0530 Subject: [PATCH 044/125] spi: atmel: Fix incorrect error path 'irq' was not released when clk_prepare_enable failed. Fix it. Signed-off-by: Sachin Kamat Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index fd7cc566095a..d4ac60b4a56e 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1583,7 +1583,7 @@ static int atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ ret = clk_prepare_enable(clk); if (ret) - goto out_unmap_regs; + goto out_free_irq; spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ if (as->caps.has_wdrbt) { @@ -1614,6 +1614,7 @@ out_free_dma: spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable_unprepare(clk); +out_free_irq: free_irq(irq, master); out_unmap_regs: iounmap(as->regs); From 8b3c569a3999a8fd5a819f892525ab5520777c92 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Mon, 7 Oct 2013 12:14:26 +0100 Subject: [PATCH 045/125] MIPS: stack protector: Fix per-task canary switch Commit 1400eb6 (MIPS: r4k,octeon,r2300: stack protector: change canary per task) was merged in v3.11 and introduced assembly in the MIPS resume functions to update the value of the current canary in __stack_chk_guard. However it used PTR_L resulting in a load of the canary value, instead of PTR_LA to construct its address. The value is intended to be random but is then treated as an address in the subsequent LONG_S (store). This was observed to cause a fault and panic: CPU 0 Unable to handle kernel paging request at virtual address 139fea20, epc == 8000cc0c, ra == 8034f2a4 Oops[#1]: ... $24 : 139fea20 1e1f7cb6 ... Call Trace: [<8000cc0c>] resume+0xac/0x118 [<8034f2a4>] __schedule+0x5f8/0x78c [<8034f4e0>] schedule_preempt_disabled+0x20/0x2c [<80348eec>] rest_init+0x74/0x84 [<804dc990>] start_kernel+0x43c/0x454 Code: 3c18804b 8f184030 8cb901f8 00c0e021 8cb002f0 8cb102f4 8cb202f8 8cb302fc This can also be forced by modifying arch/mips/include/asm/stackprotector.h so that the default __stack_chk_guard value is more likely to be a bad (or unaligned) pointer. Fix it to use PTR_LA instead, to load the address of the canary value, which the LONG_S can then use to write into it. Reported-by: bobjones (via #mipslinux on IRC) Signed-off-by: James Hogan Cc: Ralf Baechle Cc: Gregory Fong Cc: linux-mips@linux-mips.org Cc: stable@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6026/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/octeon_switch.S | 2 +- arch/mips/kernel/r2300_switch.S | 2 +- arch/mips/kernel/r4k_switch.S | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index 4204d76af854..029e002a4ea0 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -73,7 +73,7 @@ 3: #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) - PTR_L t8, __stack_chk_guard + PTR_LA t8, __stack_chk_guard LONG_L t9, TASK_STACK_CANARY(a1) LONG_S t9, 0(t8) #endif diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 38af83f84c4a..20b7b040e76f 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -67,7 +67,7 @@ LEAF(resume) 1: #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) - PTR_L t8, __stack_chk_guard + PTR_LA t8, __stack_chk_guard LONG_L t9, TASK_STACK_CANARY(a1) LONG_S t9, 0(t8) #endif diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 921238a6bd26..078de5eaca8f 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -69,7 +69,7 @@ 1: #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) - PTR_L t8, __stack_chk_guard + PTR_LA t8, __stack_chk_guard LONG_L t9, TASK_STACK_CANARY(a1) LONG_S t9, 0(t8) #endif From f50f9aabf32db7414551ffdfdccc71be5f3d6e7d Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 2 Oct 2013 13:47:28 +0200 Subject: [PATCH 046/125] HID: wiimote: fix FF deadlock The input core has an internal spinlock that is acquired during event injection via input_event() and friends but also held during FF callbacks. That means, there is no way to share a lock between event-injection and FF handling. Unfortunately, this is what is required for wiimote state tracking and what we do with state.lock and input->lock. This deadlock can be triggered when using continuous data reporting and FF on a wiimote device at the same time. I takes me at least 30m of stress-testing to trigger it but users reported considerably shorter times (http://bpaste.net/show/132504/) when using some gaming-console emulators. The real problem is that we have two copies of internal state, one in the wiimote objects and the other in the input device. As the input-lock is not supposed to be accessed from outside of input-core, we have no other chance than offloading FF handling into a worker. This actually works pretty nice and also allows to implictly merge fast rumble changes into a single request. Due to the 3-layered workers (rumble+queue+l2cap) this might reduce FF responsiveness. Initial tests were fine so lets fix the race first and if it turns out to be too slow we can always handle FF out-of-band and skip the queue-worker. Cc: # 3.11+ Reported-by: Thomas Schneider Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote-modules.c | 40 ++++++++++++++++++++++--------- drivers/hid/hid-wiimote.h | 4 +++- 2 files changed, 32 insertions(+), 12 deletions(-) diff --git a/drivers/hid/hid-wiimote-modules.c b/drivers/hid/hid-wiimote-modules.c index 2e7d644dba18..71adf9e60b13 100644 --- a/drivers/hid/hid-wiimote-modules.c +++ b/drivers/hid/hid-wiimote-modules.c @@ -119,12 +119,22 @@ static const struct wiimod_ops wiimod_keys = { * the rumble motor, this flag shouldn't be set. */ +/* used by wiimod_rumble and wiipro_rumble */ +static void wiimod_rumble_worker(struct work_struct *work) +{ + struct wiimote_data *wdata = container_of(work, struct wiimote_data, + rumble_worker); + + spin_lock_irq(&wdata->state.lock); + wiiproto_req_rumble(wdata, wdata->state.cache_rumble); + spin_unlock_irq(&wdata->state.lock); +} + static int wiimod_rumble_play(struct input_dev *dev, void *data, struct ff_effect *eff) { struct wiimote_data *wdata = input_get_drvdata(dev); __u8 value; - unsigned long flags; /* * The wiimote supports only a single rumble motor so if any magnitude @@ -137,9 +147,10 @@ static int wiimod_rumble_play(struct input_dev *dev, void *data, else value = 0; - spin_lock_irqsave(&wdata->state.lock, flags); - wiiproto_req_rumble(wdata, value); - spin_unlock_irqrestore(&wdata->state.lock, flags); + /* Locking state.lock here might deadlock with input_event() calls. + * schedule_work acts as barrier. Merging multiple changes is fine. */ + wdata->state.cache_rumble = value; + schedule_work(&wdata->rumble_worker); return 0; } @@ -147,6 +158,8 @@ static int wiimod_rumble_play(struct input_dev *dev, void *data, static int wiimod_rumble_probe(const struct wiimod_ops *ops, struct wiimote_data *wdata) { + INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); + set_bit(FF_RUMBLE, wdata->input->ffbit); if (input_ff_create_memless(wdata->input, NULL, wiimod_rumble_play)) return -ENOMEM; @@ -159,6 +172,8 @@ static void wiimod_rumble_remove(const struct wiimod_ops *ops, { unsigned long flags; + cancel_work_sync(&wdata->rumble_worker); + spin_lock_irqsave(&wdata->state.lock, flags); wiiproto_req_rumble(wdata, 0); spin_unlock_irqrestore(&wdata->state.lock, flags); @@ -1731,7 +1746,6 @@ static int wiimod_pro_play(struct input_dev *dev, void *data, { struct wiimote_data *wdata = input_get_drvdata(dev); __u8 value; - unsigned long flags; /* * The wiimote supports only a single rumble motor so if any magnitude @@ -1744,9 +1758,10 @@ static int wiimod_pro_play(struct input_dev *dev, void *data, else value = 0; - spin_lock_irqsave(&wdata->state.lock, flags); - wiiproto_req_rumble(wdata, value); - spin_unlock_irqrestore(&wdata->state.lock, flags); + /* Locking state.lock here might deadlock with input_event() calls. + * schedule_work acts as barrier. Merging multiple changes is fine. */ + wdata->state.cache_rumble = value; + schedule_work(&wdata->rumble_worker); return 0; } @@ -1756,6 +1771,8 @@ static int wiimod_pro_probe(const struct wiimod_ops *ops, { int ret, i; + INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); + wdata->extension.input = input_allocate_device(); if (!wdata->extension.input) return -ENOMEM; @@ -1817,12 +1834,13 @@ static void wiimod_pro_remove(const struct wiimod_ops *ops, if (!wdata->extension.input) return; + input_unregister_device(wdata->extension.input); + wdata->extension.input = NULL; + cancel_work_sync(&wdata->rumble_worker); + spin_lock_irqsave(&wdata->state.lock, flags); wiiproto_req_rumble(wdata, 0); spin_unlock_irqrestore(&wdata->state.lock, flags); - - input_unregister_device(wdata->extension.input); - wdata->extension.input = NULL; } static const struct wiimod_ops wiimod_pro = { diff --git a/drivers/hid/hid-wiimote.h b/drivers/hid/hid-wiimote.h index f1474f372c0b..75db0c400037 100644 --- a/drivers/hid/hid-wiimote.h +++ b/drivers/hid/hid-wiimote.h @@ -133,13 +133,15 @@ struct wiimote_state { __u8 *cmd_read_buf; __u8 cmd_read_size; - /* calibration data */ + /* calibration/cache data */ __u16 calib_bboard[4][3]; + __u8 cache_rumble; }; struct wiimote_data { struct hid_device *hdev; struct input_dev *input; + struct work_struct rumble_worker; struct led_classdev *leds[4]; struct input_dev *accel; struct input_dev *ir; From 8b5ede69d24db939f52b47effff2f6fe1e83e08b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Tue, 8 Oct 2013 08:08:24 +1100 Subject: [PATCH 047/125] powerpc/irq: Don't switch to irq stack from softirq stack MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit irq_exit() is now called on the irq stack, which can trigger a switch to the softirq stack from the irq stack. If an interrupt happens at that point, we will not properly detect the re-entrancy and clobber the original return context on the irq stack. This fixes it. The side effect is to prevent all nesting from softirq stack to irq stack even in the "safe" case but it's simpler that way and matches what x86_64 does. Reported-by: CĆ©dric Le Goater Tested-by: CĆ©dric Le Goater Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/powerpc/kernel/irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 57d286a78f86..c7cb8c232d2f 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -495,14 +495,15 @@ void __do_irq(struct pt_regs *regs) void do_IRQ(struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); - struct thread_info *curtp, *irqtp; + struct thread_info *curtp, *irqtp, *sirqtp; /* Switch to the irq stack to handle this */ curtp = current_thread_info(); irqtp = hardirq_ctx[raw_smp_processor_id()]; + sirqtp = softirq_ctx[raw_smp_processor_id()]; /* Already there ? */ - if (unlikely(curtp == irqtp)) { + if (unlikely(curtp == irqtp || curtp == sirqtp)) { __do_irq(regs); set_irq_regs(old_regs); return; From b46b28d339164c8c74020eace97163e2e478ef34 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 8 Oct 2013 16:23:36 +1000 Subject: [PATCH 048/125] drm/nouveau/mc: disable msi support by default, it's busted in tons of places Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/core/subdev/mc/base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/core/subdev/mc/base.c b/drivers/gpu/drm/nouveau/core/subdev/mc/base.c index 37712a6df923..e290cfa4acee 100644 --- a/drivers/gpu/drm/nouveau/core/subdev/mc/base.c +++ b/drivers/gpu/drm/nouveau/core/subdev/mc/base.c @@ -113,7 +113,7 @@ nouveau_mc_create_(struct nouveau_object *parent, struct nouveau_object *engine, pmc->use_msi = false; break; default: - pmc->use_msi = nouveau_boolopt(device->cfgopt, "NvMSI", true); + pmc->use_msi = nouveau_boolopt(device->cfgopt, "NvMSI", false); if (pmc->use_msi) { pmc->use_msi = pci_enable_msi(device->pdev) == 0; if (pmc->use_msi) { From 39edac70e9aedf451fccaa851b273ace9fcca0bd Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Mon, 7 Oct 2013 19:24:52 +0300 Subject: [PATCH 049/125] ALSA: hda - hdmi: Fix channel map switch not taking effect Currently hdmi_setup_audio_infoframe() reprograms the HDA channel mapping only when the infoframe is not up-to-date or the non-PCM flag has changed. However, when just the channel map has been changed, the infoframe may still be up-to-date and non-PCM flag may not have changed, so the new channel map is not actually programmed into the HDA codec. Notably, this failing case is also always triggered when the device is already in a prepared state and a new channel map is configured while changing only the channel positions (for example, plain "speaker-test -c2 -m FR,FL"). Fix that by always programming the channel map in hdmi_setup_audio_infoframe(). Tested on Intel HDMI. Signed-off-by: Anssi Hannula Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_hdmi.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 7ea0245fc6bd..50173d412ac5 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -936,6 +936,14 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, return; } + /* + * always configure channel mapping, it may have been changed by the + * user in the meantime + */ + hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, + channels, per_pin->chmap, + per_pin->chmap_set); + /* * sizeof(ai) is used instead of sizeof(*hdmi_ai) or * sizeof(*dp_ai) to avoid partial match/update problems when @@ -947,20 +955,10 @@ static void hdmi_setup_audio_infoframe(struct hda_codec *codec, "pin=%d channels=%d\n", pin_nid, channels); - hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, - channels, per_pin->chmap, - per_pin->chmap_set); hdmi_stop_infoframe_trans(codec, pin_nid); hdmi_fill_audio_infoframe(codec, pin_nid, ai.bytes, sizeof(ai)); hdmi_start_infoframe_trans(codec, pin_nid); - } else { - /* For non-pcm audio switch, setup new channel mapping - * accordingly */ - if (per_pin->non_pcm != non_pcm) - hdmi_setup_channel_mapping(codec, pin_nid, non_pcm, ca, - channels, per_pin->chmap, - per_pin->chmap_set); } per_pin->non_pcm = non_pcm; From 016c12d2fb8584db392211bc6b0bdd6fcf7cfd97 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Mon, 7 Oct 2013 15:43:49 -0500 Subject: [PATCH 050/125] ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree SoC family definitions at the moment are reactive to board needs as a result, beagle-xm would matchup with ti,omap3 which invokes omap3430_init_early instead of omap3630_init_early. Obviously, this is the wrong behavior. With clock node dts conversion, we get the following warnings before system hangs as a result and 3630 based platforms fails to boot (uart4 clocks are only present in OMAP3630 and not present in OMAP3430): ... omap_hwmod: uart4: cannot clk_get main_clk uart4_fck omap_hwmod: uart4: cannot _init_clocks WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80() omap_hwmod: uart4: couldn't init clocks ... WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state ... WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8() omap_hwmod: timer12: idle state can only be entered from enabled state WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state So, add specific compatiblity for 3630 to allow match for Beagle-XM platform. Signed-off-by: Nishanth Menon [tony@atomide.com: left out ti,omap343x, updated comments] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/mach-omap2/board-generic.c | 18 ++++++++++++++++++ 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 0c514dc8460c..2816bf612672 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -11,7 +11,7 @@ / { model = "TI OMAP3 BeagleBoard xM"; - compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3"; + compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3"; cpus { cpu@0 { diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 39c78387ddec..87162e1b94a5 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .restart = omap3xxx_restart, MACHINE_END +static const char *omap36xx_boards_compat[] __initdata = { + "ti,omap36xx", + NULL, +}; + +DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)") + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap3630_init_early, + .init_irq = omap_intc_of_init, + .handle_irq = omap3_intc_handle_irq, + .init_machine = omap_generic_init, + .init_late = omap3_init_late, + .init_time = omap3_sync32k_timer_init, + .dt_compat = omap36xx_boards_compat, + .restart = omap3xxx_restart, +MACHINE_END + static const char *omap3_gp_boards_compat[] __initdata = { "ti,omap3-beagle", "timll,omap3-devkit8000", From d623a0e19dcbc4e44a8db047158815d7f8c2b839 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 7 Oct 2013 10:22:01 -0700 Subject: [PATCH 051/125] ARM: dts: Fix pinctrl mask for omap3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The wake-up interrupt bit is available on omap3/4/5 processors unlike what we claim. Without fixing it we cannot use it on omap3 and the system configured for wake-up events will just hang on wake-up. Cc: Grygorii Strashko Cc: BenoĆ®t Cousson Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3.dtsi | 4 ++-- arch/arm/mach-omap2/mux.h | 4 +--- include/dt-bindings/pinctrl/omap.h | 4 +--- 3 files changed, 4 insertions(+), 8 deletions(-) diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 7d95cda1fae4..b41bd57f4328 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -108,7 +108,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7f1f>; + pinctrl-single,function-mask = <0xff1f>; }; omap3_pmx_wkup: pinmux@0x48002a00 { @@ -117,7 +117,7 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7f1f>; + pinctrl-single,function-mask = <0xff1f>; }; gpio1: gpio@48310000 { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 5d2080ef7923..16f78a990d04 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -28,7 +28,7 @@ #define OMAP_PULL_UP (1 << 4) #define OMAP_ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ +/* omap3/4/5 specific mux bit defines */ #define OMAP_INPUT_EN (1 << 8) #define OMAP_OFF_EN (1 << 9) #define OMAP_OFFOUT_EN (1 << 10) @@ -36,8 +36,6 @@ #define OMAP_OFF_PULL_EN (1 << 12) #define OMAP_OFF_PULL_UP (1 << 13) #define OMAP_WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ #define OMAP_WAKEUP_EVENT (1 << 15) /* Active pin states */ diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h index edbd250809cb..bed35e36fd27 100644 --- a/include/dt-bindings/pinctrl/omap.h +++ b/include/dt-bindings/pinctrl/omap.h @@ -23,7 +23,7 @@ #define PULL_UP (1 << 4) #define ALTELECTRICALSEL (1 << 5) -/* 34xx specific mux bit defines */ +/* omap3/4/5 specific mux bit defines */ #define INPUT_EN (1 << 8) #define OFF_EN (1 << 9) #define OFFOUT_EN (1 << 10) @@ -31,8 +31,6 @@ #define OFF_PULL_EN (1 << 12) #define OFF_PULL_UP (1 << 13) #define WAKEUP_EN (1 << 14) - -/* 44xx specific mux bit defines */ #define WAKEUP_EVENT (1 << 15) /* Active pin states */ From 0b8214fe186746d32d8ca5522b736d5b59fd5d40 Mon Sep 17 00:00:00 2001 From: Simon Barth Date: Tue, 8 Oct 2013 10:50:33 +0200 Subject: [PATCH 052/125] ARM: mach-omap2: board-generic: fix undefined symbol Since dra7 reuses the function 'omap5_realtime_timer_init' in arch/arm/mach-omap2/board-generic.c as timer init function, it has to be built for this SoC as well. Signed-off-by: Simon Barth Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index fa74a0625da1..ead48fa5715e 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -628,7 +628,7 @@ void __init omap4_local_timer_init(void) #endif /* CONFIG_HAVE_ARM_TWD */ #endif /* CONFIG_ARCH_OMAP4 */ -#ifdef CONFIG_SOC_OMAP5 +#if defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) void __init omap5_realtime_timer_init(void) { omap4_sync32k_timer_init(); @@ -636,7 +636,7 @@ void __init omap5_realtime_timer_init(void) clocksource_of_init(); } -#endif /* CONFIG_SOC_OMAP5 */ +#endif /* CONFIG_SOC_OMAP5 || CONFIG_SOC_DRA7XX */ /** * omap_timer_init - build and register timer device with an From c6cc3d58b4042f5cadae653ff8d3df26af1a0169 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 8 Oct 2013 19:57:50 +0200 Subject: [PATCH 053/125] ALSA: hda - Add fixup for ASUS N56VZ ASUS N56VZ needs a fixup for the bass speaker pin, which was already provided via model=asus-mode4. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=841645 Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 52c26d3a61d4..ed9deb66f593 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -4596,6 +4596,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x1028, 0x05d8, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1028, 0x05db, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), + SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_ASUS_MODE4), SND_PCI_QUIRK(0x1043, 0x8469, "ASUS mobo", ALC662_FIXUP_NO_JACK_DETECT), SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_FIXUP_ASUS_MODE2), SND_PCI_QUIRK(0x144d, 0xc051, "Samsung R720", ALC662_FIXUP_IDEAPAD), From d1f1ca36b566aa56effdd7df69750062ec735131 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pali=20Roh=C3=A1r?= Date: Mon, 23 Sep 2013 14:50:12 +0200 Subject: [PATCH 054/125] ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs attribute if value is higher than max_current specified in board file. By default global C variables are zero, so changing always failed. This patch adding missing max_current and setting it to max safe value 100 (10 mA). It is unclear which commit exactly caused this regression as the lp5523 driver was broken and was hiding the platform data breakage. Now the driver is fixed so this should be fixed as well. Signed-off-by: Pali RohĆ”r Signed-off-by: Joerg Reisenweber [tony@atomide.com: updated comments to describe regression] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index c3270c0f1fce..f6fe388af989 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -167,38 +167,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[] = { .name = "lp5523:kb1", .chan_nr = 0, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb2", .chan_nr = 1, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb3", .chan_nr = 2, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb4", .chan_nr = 3, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:b", .chan_nr = 4, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:g", .chan_nr = 5, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:r", .chan_nr = 6, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb5", .chan_nr = 7, .led_current = 50, + .max_current = 100, }, { .name = "lp5523:kb6", .chan_nr = 8, .led_current = 50, + .max_current = 100, } }; From b9aa8510dd68143cc9d66c520002b638983e254b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Tue, 8 Oct 2013 16:31:59 -0400 Subject: [PATCH 055/125] drm/gma500: fix things after get/put page helpers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 8b9ba7a3 'drm/gma500: use gem get/put page helpers' was missing a line, which resulted in garbled screen. Signed-off-by: Rob Clark Tested-by: Guillaume CLƉMENT Signed-off-by: Dave Airlie --- drivers/gpu/drm/gma500/gtt.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/gma500/gtt.c b/drivers/gpu/drm/gma500/gtt.c index 92babac362ec..2db731f00930 100644 --- a/drivers/gpu/drm/gma500/gtt.c +++ b/drivers/gpu/drm/gma500/gtt.c @@ -204,6 +204,7 @@ static int psb_gtt_attach_pages(struct gtt_range *gt) if (IS_ERR(pages)) return PTR_ERR(pages); + gt->npage = gt->gem.size / PAGE_SIZE; gt->pages = pages; return 0; From 25f2bd7f5add608c1d1405938f39c96927b275ca Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 2 Oct 2013 19:15:03 +0200 Subject: [PATCH 056/125] hwmon: (applesmc) Always read until end of data The crash reported and investigated in commit 5f4513 turned out to be caused by a change to the read interface on newer (2012) SMCs. Tests by Chris show that simply reading the data valid line is enough for the problem to go away. Additional tests show that the newer SMCs no longer wait for the number of requested bytes, but start sending data right away. Apparently the number of bytes to read is no longer specified as before, but instead found out by reading until end of data. Failure to read until end of data confuses the state machine, which eventually causes the crash. As a remedy, assuming bit0 is the read valid line, make sure there is nothing more to read before leaving the read function. Tested to resolve the original problem, and runtested on MBA3,1, MBP4,1, MBP8,2, MBP10,1, MBP10,2. The patch seems to have no effect on machines before 2012. Tested-by: Chris Murphy Cc: stable@vger.kernel.org Signed-off-by: Henrik Rydberg Signed-off-by: Guenter Roeck --- drivers/hwmon/applesmc.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 98814d12a604..3288f13d2d87 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -230,6 +230,7 @@ static int send_argument(const char *key) static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) { + u8 status, data = 0; int i; if (send_command(cmd) || send_argument(key)) { @@ -237,6 +238,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) return -EIO; } + /* This has no effect on newer (2012) SMCs */ if (send_byte(len, APPLESMC_DATA_PORT)) { pr_warn("%.4s: read len fail\n", key); return -EIO; @@ -250,6 +252,17 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) buffer[i] = inb(APPLESMC_DATA_PORT); } + /* Read the data port until bit0 is cleared */ + for (i = 0; i < 16; i++) { + udelay(APPLESMC_MIN_WAIT); + status = inb(APPLESMC_CMD_PORT); + if (!(status & 0x01)) + break; + data = inb(APPLESMC_DATA_PORT); + } + if (i) + pr_warn("flushed %d bytes, last value is: %d\n", i, data); + return 0; } From ecc7e6f3bb8ad56764667aeabb860c24a6fa37f9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 10 Oct 2013 07:05:41 +1000 Subject: [PATCH 057/125] Revert "drm/fb-helper: don't sleep for screen unblank when an oops is in progress" This reverts commit 928c2f0c006bf7f381f58af2b2786d2a858ae311. This patch double applied, two checks for the price of one. Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_fb_helper.c | 8 -------- 1 file changed, 8 deletions(-) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index f6f6cc7fc133..3d13ca6e257f 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -407,14 +407,6 @@ static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode) struct drm_connector *connector; int i, j; - /* - * fbdev->blank can be called from irq context in case of a panic. - * Since we already have our own special panic handler which will - * restore the fbdev console mode completely, just bail out early. - */ - if (oops_in_progress) - return; - /* * fbdev->blank can be called from irq context in case of a panic. * Since we already have our own special panic handler which will From aaed41ec5b8d734f79d7b87723190256ac6a0926 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:44:39 -0400 Subject: [PATCH 058/125] drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation Return -ENOMEM if the allocation fails. Signed-off-by: Alex Deucher Reviewed-by: Jani Nikula --- drivers/gpu/drm/drm_edid.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 1688ff500513..830f7501cb4d 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -2925,6 +2925,8 @@ int drm_edid_to_speaker_allocation(struct edid *edid, u8 **sadb) /* Speaker Allocation Data Block */ if (dbl == 3) { *sadb = kmalloc(dbl, GFP_KERNEL); + if (!*sadb) + return -ENOMEM; memcpy(*sadb, &db[1], dbl); count = dbl; break; From 062c2e4363451d49ef840232fe65e8bff0dde2a5 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:09:54 -0400 Subject: [PATCH 059/125] drm/radeon: use 64-bit math to calculate CTS values for audio (v2) Avoid losing precision. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 v2: fix math as per Anssi's comments. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_hdmi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index b0fa6002af3e..49043a5ac65c 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -75,8 +75,15 @@ static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = { */ static void r600_hdmi_calc_cts(uint32_t clock, int *CTS, int N, int freq) { - if (*CTS == 0) - *CTS = clock * N / (128 * freq) * 1000; + u64 n; + u32 d; + + if (*CTS == 0) { + n = (u64)clock * (u64)N * 1000ULL; + d = 128 * freq; + do_div(n, d); + *CTS = n; + } DRM_DEBUG("Using ACR timing N=%d CTS=%d for frequency %d\n", N, *CTS, freq); } From e7d12c2f98ae1e68c7298e5028048d150fa553a1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:19:42 -0400 Subject: [PATCH 060/125] drm/radeon: fix N/CTS clock matching for audio The drm code that calculates the 1001 clocks rounds up rather than truncating. This allows the table to match properly on those modes. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_hdmi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 49043a5ac65c..567703fdfbf1 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -57,15 +57,15 @@ enum r600_hdmi_iec_status_bits { static const struct radeon_hdmi_acr r600_hdmi_predefined_acr[] = { /* 32kHz 44.1kHz 48kHz */ /* Clock N CTS N CTS N CTS */ - { 25174, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */ + { 25175, 4576, 28125, 7007, 31250, 6864, 28125 }, /* 25,20/1.001 MHz */ { 25200, 4096, 25200, 6272, 28000, 6144, 25200 }, /* 25.20 MHz */ { 27000, 4096, 27000, 6272, 30000, 6144, 27000 }, /* 27.00 MHz */ { 27027, 4096, 27027, 6272, 30030, 6144, 27027 }, /* 27.00*1.001 MHz */ { 54000, 4096, 54000, 6272, 60000, 6144, 54000 }, /* 54.00 MHz */ { 54054, 4096, 54054, 6272, 60060, 6144, 54054 }, /* 54.00*1.001 MHz */ - { 74175, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */ + { 74176, 11648, 210937, 17836, 234375, 11648, 140625 }, /* 74.25/1.001 MHz */ { 74250, 4096, 74250, 6272, 82500, 6144, 74250 }, /* 74.25 MHz */ - { 148351, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */ + { 148352, 11648, 421875, 8918, 234375, 5824, 140625 }, /* 148.50/1.001 MHz */ { 148500, 4096, 148500, 6272, 165000, 6144, 148500 }, /* 148.50 MHz */ { 0, 4096, 0, 6272, 0, 6144, 0 } /* Other */ }; From ee0fec312a1c4e26f255955da942562cd8908a4b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Sep 2013 18:22:15 -0400 Subject: [PATCH 061/125] drm/radeon: use hw generated CTS/N values for audio Use the hw generated values rather than calculating them in the driver. There may be some older r6xx asics where this doesn't work correctly. This remains to be seen. See bug: https://bugs.freedesktop.org/show_bug.cgi?id=69675 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/evergreen_hdmi.c | 3 +-- drivers/gpu/drm/radeon/r600_hdmi.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c index f71ce390aebe..f815c20640bd 100644 --- a/drivers/gpu/drm/radeon/evergreen_hdmi.c +++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c @@ -288,8 +288,7 @@ void evergreen_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode /* fglrx clears sth in AFMT_AUDIO_PACKET_CONTROL2 here */ WREG32(HDMI_ACR_PACKET_CONTROL + offset, - HDMI_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */ - HDMI_ACR_SOURCE); /* select SW CTS value */ + HDMI_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ evergreen_hdmi_update_ACR(encoder, mode->clock); diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index 567703fdfbf1..e2ae1c237fb4 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -451,8 +451,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod } WREG32(HDMI0_ACR_PACKET_CONTROL + offset, - HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */ - HDMI0_ACR_SOURCE); /* select SW CTS value */ + HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ WREG32(HDMI0_VBI_PACKET_CONTROL + offset, HDMI0_NULL_SEND | /* send null packets when required */ From dca5086a90c9ec64f4e0de801a659508202b0640 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 30 Sep 2013 19:11:24 -0400 Subject: [PATCH 062/125] drm/radeon/dpm: disable multiple UVD states Always use the regular UVD state for now. This fixes a performance regression with UVD playback on certain APUs. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/radeon_pm.c | 3 +++ drivers/gpu/drm/radeon/radeon_uvd.c | 3 ++- 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c index ac07ad1d4f8c..4f6b7fc7ad3c 100644 --- a/drivers/gpu/drm/radeon/radeon_pm.c +++ b/drivers/gpu/drm/radeon/radeon_pm.c @@ -945,6 +945,8 @@ void radeon_dpm_enable_uvd(struct radeon_device *rdev, bool enable) if (enable) { mutex_lock(&rdev->pm.mutex); rdev->pm.dpm.uvd_active = true; + /* disable this for now */ +#if 0 if ((rdev->pm.dpm.sd == 1) && (rdev->pm.dpm.hd == 0)) dpm_state = POWER_STATE_TYPE_INTERNAL_UVD_SD; else if ((rdev->pm.dpm.sd == 2) && (rdev->pm.dpm.hd == 0)) @@ -954,6 +956,7 @@ void radeon_dpm_enable_uvd(struct radeon_device *rdev, bool enable) else if ((rdev->pm.dpm.sd == 0) && (rdev->pm.dpm.hd == 2)) dpm_state = POWER_STATE_TYPE_INTERNAL_UVD_HD2; else +#endif dpm_state = POWER_STATE_TYPE_INTERNAL_UVD; rdev->pm.dpm.state = dpm_state; mutex_unlock(&rdev->pm.mutex); diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c index a0f11856ddde..4f2e73f79638 100644 --- a/drivers/gpu/drm/radeon/radeon_uvd.c +++ b/drivers/gpu/drm/radeon/radeon_uvd.c @@ -798,7 +798,8 @@ void radeon_uvd_note_usage(struct radeon_device *rdev) (rdev->pm.dpm.hd != hd)) { rdev->pm.dpm.sd = sd; rdev->pm.dpm.hd = hd; - streams_changed = true; + /* disable this for now */ + /*streams_changed = true;*/ } } From aa3e146d04b6ae37939daeebaec060562b3db559 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Tue, 1 Oct 2013 16:40:45 -0400 Subject: [PATCH 063/125] drm/radeon: fix typo in CP DMA register headers Wrong bit offset for SRC endian swapping. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreend.h | 4 ++-- drivers/gpu/drm/radeon/r600d.h | 2 +- drivers/gpu/drm/radeon/sid.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h index 8768fd6a1e27..4f6d2962767d 100644 --- a/drivers/gpu/drm/radeon/evergreend.h +++ b/drivers/gpu/drm/radeon/evergreend.h @@ -1501,7 +1501,7 @@ * 6. COMMAND [29:22] | BYTE_COUNT [20:0] */ # define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20) - /* 0 - SRC_ADDR + /* 0 - DST_ADDR * 1 - GDS */ # define PACKET3_CP_DMA_ENGINE(x) ((x) << 27) @@ -1516,7 +1516,7 @@ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ # define PACKET3_CP_DMA_DIS_WC (1 << 21) -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index e673fe26ea84..7b3c7b5932c5 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -1523,7 +1523,7 @@ */ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 diff --git a/drivers/gpu/drm/radeon/sid.h b/drivers/gpu/drm/radeon/sid.h index 52d2ab6b67a0..7e2e0ea66a00 100644 --- a/drivers/gpu/drm/radeon/sid.h +++ b/drivers/gpu/drm/radeon/sid.h @@ -1553,7 +1553,7 @@ * 6. COMMAND [30:21] | BYTE_COUNT [20:0] */ # define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20) - /* 0 - SRC_ADDR + /* 0 - DST_ADDR * 1 - GDS */ # define PACKET3_CP_DMA_ENGINE(x) ((x) << 27) @@ -1568,7 +1568,7 @@ # define PACKET3_CP_DMA_CP_SYNC (1 << 31) /* COMMAND */ # define PACKET3_CP_DMA_DIS_WC (1 << 21) -# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 23) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) /* 0 - none * 1 - 8 in 16 * 2 - 8 in 32 From 50b8f5aec04ebec7dbdf2adb17220b9148c99e63 Mon Sep 17 00:00:00 2001 From: wojciech kapuscinski Date: Tue, 1 Oct 2013 19:54:33 -0400 Subject: [PATCH 064/125] drm/radeon: fix hw contexts for SUMO2 asics They have 4 rather than 8. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=63599 Signed-off-by: wojciech kapuscinski Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/evergreen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 555164e270a7..b5c67a99dda9 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -3131,7 +3131,7 @@ static void evergreen_gpu_init(struct radeon_device *rdev) rdev->config.evergreen.sx_max_export_size = 256; rdev->config.evergreen.sx_max_export_pos_size = 64; rdev->config.evergreen.sx_max_export_smx_size = 192; - rdev->config.evergreen.max_hw_contexts = 8; + rdev->config.evergreen.max_hw_contexts = 4; rdev->config.evergreen.sq_num_cf_insts = 2; rdev->config.evergreen.sc_prim_fifo_size = 0x40; From 89cd67b326fa95872cc2b4524cd807128db6071d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 1 Jul 2013 19:39:34 +0300 Subject: [PATCH 065/125] drm/radeon: forever loop on error in radeon_do_test_moves() The error path does this: for (--i; i >= 0; --i) { which is a forever loop because "i" is unsigned. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/radeon_test.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c index f4d6bcee9006..12e8099a0823 100644 --- a/drivers/gpu/drm/radeon/radeon_test.c +++ b/drivers/gpu/drm/radeon/radeon_test.c @@ -36,8 +36,8 @@ static void radeon_do_test_moves(struct radeon_device *rdev, int flag) struct radeon_bo *vram_obj = NULL; struct radeon_bo **gtt_obj = NULL; uint64_t gtt_addr, vram_addr; - unsigned i, n, size; - int r, ring; + unsigned n, size; + int i, r, ring; switch (flag) { case RADEON_TEST_COPY_DMA: From 96d8df846f52a720c8ae1fadadfad7c9e733e336 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 27 Sep 2013 23:18:39 +0300 Subject: [PATCH 066/125] drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers() It should be ">=" instead of ">" here. The table->mc_reg_address[] array has SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE (16) elements. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/btc_dpm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/btc_dpm.c b/drivers/gpu/drm/radeon/btc_dpm.c index b162e98a2953..9b6950d9b3c0 100644 --- a/drivers/gpu/drm/radeon/btc_dpm.c +++ b/drivers/gpu/drm/radeon/btc_dpm.c @@ -1930,7 +1930,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; tmp = RREG32(MC_PMG_CMD_MRS); @@ -1945,7 +1945,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; case MC_SEQ_RESERVE_M >> 2: @@ -1959,7 +1959,7 @@ static int btc_set_mc_special_registers(struct radeon_device *rdev, } j++; - if (j > SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; default: From 5fd9c581862a4874c0bdaf16231d8873832bbb99 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 28 Sep 2013 12:35:31 +0300 Subject: [PATCH 067/125] drm/radeon/dpm: off by one in si_set_mc_special_registers() These checks should be ">=" instead of ">". j is used as an offset into the table->mc_reg_address[] array and that has SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE (16) elements. Signed-off-by: Dan Carpenter Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si_dpm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c index 9ace28702c76..2332aa1bf93c 100644 --- a/drivers/gpu/drm/radeon/si_dpm.c +++ b/drivers/gpu/drm/radeon/si_dpm.c @@ -5208,7 +5208,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, table->mc_reg_table_entry[k].mc_data[j] |= 0x100; } j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; if (!pi->mem_gddr5) { @@ -5218,7 +5218,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, table->mc_reg_table_entry[k].mc_data[j] = (table->mc_reg_table_entry[k].mc_data[i] & 0xffff0000) >> 16; j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; } break; @@ -5231,7 +5231,7 @@ static int si_set_mc_special_registers(struct radeon_device *rdev, (temp_reg & 0xffff0000) | (table->mc_reg_table_entry[k].mc_data[i] & 0x0000ffff); j++; - if (j > SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) + if (j >= SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE) return -EINVAL; break; default: From a6f4ae8dc904ad0e4e416800172fc88f716314dd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 2 Oct 2013 14:50:57 -0400 Subject: [PATCH 068/125] drm/radeon: improve soft reset on SI Disable CG/PG and stop the rlc before resetting. Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/radeon/si.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index c354c1094967..d4652af425b8 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -85,6 +85,9 @@ extern void si_dma_vm_set_page(struct radeon_device *rdev, uint32_t incr, uint32_t flags); static void si_enable_gui_idle_interrupt(struct radeon_device *rdev, bool enable); +static void si_fini_pg(struct radeon_device *rdev); +static void si_fini_cg(struct radeon_device *rdev); +static void si_rlc_stop(struct radeon_device *rdev); static const u32 verde_rlc_save_restore_register_list[] = { @@ -3608,6 +3611,13 @@ static void si_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) dev_info(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS)); + /* disable PG/CG */ + si_fini_pg(rdev); + si_fini_cg(rdev); + + /* stop the rlc */ + si_rlc_stop(rdev); + /* Disable CP parsing/prefetching */ WREG32(CP_ME_CNTL, CP_ME_HALT | CP_PFP_HALT | CP_CE_HALT); From fb2c7f4d2e7a40fa4d5cc589f21dad89b371edb0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 2 Oct 2013 14:54:44 -0400 Subject: [PATCH 069/125] drm/radeon: improve soft reset on CIK Disable CG/PG before resetting. Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/cik.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c index d02fd1c045d5..b874ccdf52f7 100644 --- a/drivers/gpu/drm/radeon/cik.c +++ b/drivers/gpu/drm/radeon/cik.c @@ -77,6 +77,8 @@ static void cik_pcie_gen3_enable(struct radeon_device *rdev); static void cik_program_aspm(struct radeon_device *rdev); static void cik_init_pg(struct radeon_device *rdev); static void cik_init_cg(struct radeon_device *rdev); +static void cik_fini_pg(struct radeon_device *rdev); +static void cik_fini_cg(struct radeon_device *rdev); static void cik_enable_gui_idle_interrupt(struct radeon_device *rdev, bool enable); @@ -4185,6 +4187,10 @@ static void cik_gpu_soft_reset(struct radeon_device *rdev, u32 reset_mask) dev_info(rdev->dev, " VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x%08X\n", RREG32(VM_CONTEXT1_PROTECTION_FAULT_STATUS)); + /* disable CG/PG */ + cik_fini_pg(rdev); + cik_fini_cg(rdev); + /* stop the rlc */ cik_rlc_stop(rdev); From 4076a65544e2de310cbf4eaadb13ee15bbfaaf4f Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 7 Oct 2013 21:25:39 -0400 Subject: [PATCH 070/125] drm/radeon/dpm: disable bapm on TN asics Causes hangs on certain boards. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=70053 Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/trinity_dpm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/trinity_dpm.c b/drivers/gpu/drm/radeon/trinity_dpm.c index 7f998bf1cc9d..9364129ba292 100644 --- a/drivers/gpu/drm/radeon/trinity_dpm.c +++ b/drivers/gpu/drm/radeon/trinity_dpm.c @@ -1868,7 +1868,7 @@ int trinity_dpm_init(struct radeon_device *rdev) for (i = 0; i < SUMO_MAX_HARDWARE_POWERLEVELS; i++) pi->at[i] = TRINITY_AT_DFLT; - pi->enable_bapm = true; + pi->enable_bapm = false; pi->enable_nbps_policy = true; pi->enable_sclk_ds = true; pi->enable_gfx_power_gating = true; From cccdcea14fc2de8707c52e537fa2b384ccfe7ec2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:33 +0200 Subject: [PATCH 071/125] i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Reported-by: Zhangfei Gao Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 4c1b60539a25..0aa01136f8d9 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -270,7 +270,8 @@ static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume); MODULE_ALIAS("platform:i2c_designware"); static struct platform_driver dw_i2c_driver = { - .remove = dw_i2c_remove, + .probe = dw_i2c_probe, + .remove = dw_i2c_remove, .driver = { .name = "i2c_designware", .owner = THIS_MODULE, @@ -282,7 +283,7 @@ static struct platform_driver dw_i2c_driver = { static int __init dw_i2c_init_driver(void) { - return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe); + return platform_driver_register(&dw_i2c_driver); } subsys_initcall(dw_i2c_init_driver); From 3611431ce7281a6542d47bd5b2fc2206fed5749f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:34 +0200 Subject: [PATCH 072/125] i2c: i2c-imx: replace platform_driver_probe to support deferred probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Uwe Kleine-Kƶnig Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index ccf46656bdad..1d7efa3169cd 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -365,7 +365,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) clk_disable_unprepare(i2c_imx->clk); } -static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, +static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, unsigned int rate) { struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div; @@ -589,7 +589,7 @@ static struct i2c_algorithm i2c_imx_algo = { .functionality = i2c_imx_func, }; -static int __init i2c_imx_probe(struct platform_device *pdev) +static int i2c_imx_probe(struct platform_device *pdev) { const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids, &pdev->dev); @@ -697,7 +697,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) return 0; /* Return OK */ } -static int __exit i2c_imx_remove(struct platform_device *pdev) +static int i2c_imx_remove(struct platform_device *pdev) { struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); @@ -715,7 +715,8 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) } static struct platform_driver i2c_imx_driver = { - .remove = __exit_p(i2c_imx_remove), + .probe = i2c_imx_probe, + .remove = i2c_imx_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -726,7 +727,7 @@ static struct platform_driver i2c_imx_driver = { static int __init i2c_adap_imx_init(void) { - return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe); + return platform_driver_register(&i2c_imx_driver); } subsys_initcall(i2c_adap_imx_init); From cc40bf9a444f687a7b76450b1ad742b2ea262af4 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:35 +0200 Subject: [PATCH 073/125] i2c: i2c-mxs: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Marek Vasut Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index f4a01675fa71..b7c857774708 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -780,12 +780,13 @@ static struct platform_driver mxs_i2c_driver = { .owner = THIS_MODULE, .of_match_table = mxs_i2c_dt_ids, }, + .probe = mxs_i2c_probe, .remove = mxs_i2c_remove, }; static int __init mxs_i2c_init(void) { - return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe); + return platform_driver_register(&mxs_i2c_driver); } subsys_initcall(mxs_i2c_init); From 6d2cfb109725b748f47a242f87be9c31bf7e42c0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:36 +0200 Subject: [PATCH 074/125] i2c: i2c-stu300: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-stu300.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index f8f6f2e552db..04a17b9b38bb 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -859,8 +859,7 @@ static const struct i2c_algorithm stu300_algo = { .functionality = stu300_func, }; -static int __init -stu300_probe(struct platform_device *pdev) +static int stu300_probe(struct platform_device *pdev) { struct stu300_dev *dev; struct i2c_adapter *adap; @@ -966,8 +965,7 @@ static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume); #define STU300_I2C_PM NULL #endif -static int __exit -stu300_remove(struct platform_device *pdev) +static int stu300_remove(struct platform_device *pdev) { struct stu300_dev *dev = platform_get_drvdata(pdev); @@ -989,13 +987,14 @@ static struct platform_driver stu300_i2c_driver = { .pm = STU300_I2C_PM, .of_match_table = stu300_dt_match, }, - .remove = __exit_p(stu300_remove), + .probe = stu300_probe, + .remove = stu300_remove, }; static int __init stu300_init(void) { - return platform_driver_probe(&stu300_i2c_driver, stu300_probe); + return platform_driver_register(&stu300_i2c_driver); } static void __exit stu300_exit(void) From 47b6e477ed4ecacddd1f82d04d686026e08dc3db Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 10 Oct 2013 08:04:06 +0200 Subject: [PATCH 075/125] i2c: Not all adapters have a parent The code in acpi_i2c_register_devices() assumes that all i2c adapters have a parent. This is not necessarily the case, for example the i2c-stub driver instantiate a virtual i2c adapter without a parent. Check for this to avoid a NULL pointer deference. Signed-off-by: Jean Delvare Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 29d3f045a2bf..3be58f89ac77 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1134,6 +1134,9 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap) acpi_handle handle; acpi_status status; + if (!adap->dev.parent) + return; + handle = ACPI_HANDLE(adap->dev.parent); if (!handle) return; From 4cdbf7d346e7461c3b93a26707c852e2c9db3753 Mon Sep 17 00:00:00 2001 From: Taras Kondratiuk Date: Mon, 7 Oct 2013 13:41:59 +0300 Subject: [PATCH 076/125] i2c: omap: Clear ARDY bit twice Initially commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac "i2c-omap: Double clear of ARDY status in IRQ handler" added a workaround for undocumented errata ProDB0017052. But then commit 1d7afc95946487945cc7f5019b41255b72224b70 "i2c: omap: ack IRQ in parts" refactored code and missed one of ARDY clearings. So current code violates errata. It causes often i2c bus timeouts on my Pandaboard. This patch adds a second clearing in place. Signed-off-by: Grygorii Strashko Signed-off-by: Taras Kondratiuk Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-omap.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6d8308d5dc4e..9967a6f9c2ff 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -939,6 +939,9 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) /* * ProDB0017052: Clear ARDY bit twice */ + if (stat & OMAP_I2C_STAT_ARDY) + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ARDY); + if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | From 492ed77bfadb968cca7beca348cd45b444393cd4 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Tue, 8 Oct 2013 15:51:53 +0200 Subject: [PATCH 077/125] i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors of_get_named_gpio could return -E_PROBE_DEFER or another error code. This error should be passed further instead of being ignored. Signed-off-by: Ionut Nicu Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-gpio.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 5d4a99ba743e..7f343bcd492e 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -66,7 +66,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, struct device_node *adapter_np, *child; struct i2c_adapter *adapter; unsigned *values, *gpios; - int i = 0; + int i = 0, ret; if (!np) return -ENODEV; @@ -116,8 +116,12 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, return -ENOMEM; } - for (i = 0; i < mux->data.n_gpios; i++) - gpios[i] = of_get_named_gpio(np, "mux-gpios", i); + for (i = 0; i < mux->data.n_gpios; i++) { + ret = of_get_named_gpio(np, "mux-gpios", i); + if (ret < 0) + return ret; + gpios[i] = ret; + } mux->data.gpios = gpios; From 9937b8d89e1b70c08330b57afbc62c934e37c9e2 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Wed, 9 Oct 2013 11:50:45 +0200 Subject: [PATCH 078/125] i2c: i2c-mux-gpio: use deferred probing If the i2c-parent bus driver is not loaded, returning -ENODEV will force people to unload and then reload the module again to get it working. Signed-off-by: Ionut Nicu Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 7f343bcd492e..a764da777f08 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -79,7 +79,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, adapter = of_find_i2c_adapter_by_node(adapter_np); if (!adapter) { dev_err(&pdev->dev, "Cannot find parent bus\n"); - return -ENODEV; + return -EPROBE_DEFER; } mux->data.parent = i2c_adapter_id(adapter); put_device(&adapter->dev); @@ -181,7 +181,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev) if (!parent) { dev_err(&pdev->dev, "Parent adapter (%d) not found\n", mux->data.parent); - return -ENODEV; + return -EPROBE_DEFER; } mux->parent = parent; From 0cd98069ad7acb2a1bdb1bb71b904c1aae0033d0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Oct 2013 10:19:13 +0200 Subject: [PATCH 079/125] i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-arb-gpio-challenge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 74b41ae690f3..928656e241dd 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -200,7 +200,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) arb->parent = of_find_i2c_adapter_by_node(parent_np); if (!arb->parent) { dev_err(dev, "Cannot find parent bus\n"); - return -EINVAL; + return -EPROBE_DEFER; } /* Actually add the mux adapter */ From 2737de460e33df89461a59b247d3bfd477101785 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Oct 2013 10:19:13 +0200 Subject: [PATCH 080/125] i2c: i2c-mux-pinctrl: use deferred probe when adapter not found If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-pinctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 69a91732ae65..68a37157377d 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -113,7 +113,7 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, adapter = of_find_i2c_adapter_by_node(adapter_np); if (!adapter) { dev_err(mux->dev, "Cannot find parent bus\n"); - return -ENODEV; + return -EPROBE_DEFER; } mux->pdata->parent_bus_num = i2c_adapter_id(adapter); put_device(&adapter->dev); @@ -211,7 +211,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev) if (!mux->parent) { dev_err(&pdev->dev, "Parent adapter (%d) not found\n", mux->pdata->parent_bus_num); - ret = -ENODEV; + ret = -EPROBE_DEFER; goto err; } From d0d538b9d1239ed6ed318a2304ba5a763f835089 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Wed, 9 Oct 2013 19:13:19 +0300 Subject: [PATCH 081/125] KVM: nVMX: fix shadow on EPT 72f857950f6f19 broke shadow on EPT. This patch reverts it and fixes PAE on nEPT (which reverted commit fixed) in other way. Shadow on EPT is now broken because while L1 builds shadow page table for L2 (which is PAE while L2 is in real mode) it never loads L2's GUEST_PDPTR[0-3]. They do not need to be loaded because without nested virtualization HW does this during guest entry if EPT is disabled, but in our case L0 emulates L2's vmentry while EPT is enables, so we cannot rely on vmcs12->guest_pdptr[0-3] to contain up-to-date values and need to re-read PDPTEs from L2 memory. This is what kvm_set_cr3() is doing, but by clearing cache bits during L2 vmentry we drop values that kvm_set_cr3() read from memory. So why the same code does not work for PAE on nEPT? kvm_set_cr3() reads pdptes into vcpu->arch.walk_mmu->pdptrs[]. walk_mmu points to vcpu->arch.nested_mmu while nested guest is running, but ept_load_pdptrs() uses vcpu->arch.mmu which contain incorrect values. Fix that by using walk_mmu in ept_(load|save)_pdptrs. Signed-off-by: Gleb Natapov Reviewed-by: Paolo Bonzini Tested-by: Paolo Bonzini Signed-off-by: Paolo Bonzini --- arch/x86/kvm/vmx.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 3b8e7459dd4d..2b2fce1b2009 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3255,25 +3255,29 @@ static void vmx_decache_cr4_guest_bits(struct kvm_vcpu *vcpu) static void ept_load_pdptrs(struct kvm_vcpu *vcpu) { + struct kvm_mmu *mmu = vcpu->arch.walk_mmu; + if (!test_bit(VCPU_EXREG_PDPTR, (unsigned long *)&vcpu->arch.regs_dirty)) return; if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) { - vmcs_write64(GUEST_PDPTR0, vcpu->arch.mmu.pdptrs[0]); - vmcs_write64(GUEST_PDPTR1, vcpu->arch.mmu.pdptrs[1]); - vmcs_write64(GUEST_PDPTR2, vcpu->arch.mmu.pdptrs[2]); - vmcs_write64(GUEST_PDPTR3, vcpu->arch.mmu.pdptrs[3]); + vmcs_write64(GUEST_PDPTR0, mmu->pdptrs[0]); + vmcs_write64(GUEST_PDPTR1, mmu->pdptrs[1]); + vmcs_write64(GUEST_PDPTR2, mmu->pdptrs[2]); + vmcs_write64(GUEST_PDPTR3, mmu->pdptrs[3]); } } static void ept_save_pdptrs(struct kvm_vcpu *vcpu) { + struct kvm_mmu *mmu = vcpu->arch.walk_mmu; + if (is_paging(vcpu) && is_pae(vcpu) && !is_long_mode(vcpu)) { - vcpu->arch.mmu.pdptrs[0] = vmcs_read64(GUEST_PDPTR0); - vcpu->arch.mmu.pdptrs[1] = vmcs_read64(GUEST_PDPTR1); - vcpu->arch.mmu.pdptrs[2] = vmcs_read64(GUEST_PDPTR2); - vcpu->arch.mmu.pdptrs[3] = vmcs_read64(GUEST_PDPTR3); + mmu->pdptrs[0] = vmcs_read64(GUEST_PDPTR0); + mmu->pdptrs[1] = vmcs_read64(GUEST_PDPTR1); + mmu->pdptrs[2] = vmcs_read64(GUEST_PDPTR2); + mmu->pdptrs[3] = vmcs_read64(GUEST_PDPTR3); } __set_bit(VCPU_EXREG_PDPTR, @@ -7777,10 +7781,6 @@ static void prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12) vmcs_write64(GUEST_PDPTR1, vmcs12->guest_pdptr1); vmcs_write64(GUEST_PDPTR2, vmcs12->guest_pdptr2); vmcs_write64(GUEST_PDPTR3, vmcs12->guest_pdptr3); - __clear_bit(VCPU_EXREG_PDPTR, - (unsigned long *)&vcpu->arch.regs_avail); - __clear_bit(VCPU_EXREG_PDPTR, - (unsigned long *)&vcpu->arch.regs_dirty); } kvm_register_write(vcpu, VCPU_REGS_RSP, vmcs12->guest_rsp); From cfc860253abd73e1681696c08ea268d33285a2c4 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Sat, 21 Sep 2013 09:53:28 +1000 Subject: [PATCH 082/125] KVM: PPC: Book3S HV: Fix typo in saving DSCR This fixes a typo in the code that saves the guest DSCR (Data Stream Control Register) into the kvm_vcpu_arch struct on guest exit. The effect of the typo was that the DSCR value was saved in the wrong place, so changes to the DSCR by the guest didn't persist across guest exit and entry, and some host kernel memory got corrupted. Cc: stable@vger.kernel.org [v3.1+] Signed-off-by: Paul Mackerras Acked-by: Alexander Graf Signed-off-by: Paolo Bonzini --- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index 294b7af28cdd..c71103b8a748 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -1066,7 +1066,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) BEGIN_FTR_SECTION mfspr r8, SPRN_DSCR ld r7, HSTATE_DSCR(r13) - std r8, VCPU_DSCR(r7) + std r8, VCPU_DSCR(r9) mtspr SPRN_DSCR, r7 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206) From 40fde70d0df993d1a652d6cc69f8b4e967656170 Mon Sep 17 00:00:00 2001 From: Bharat Bhushan Date: Wed, 7 Aug 2013 15:33:46 +0530 Subject: [PATCH 083/125] kvm: ppc: booke: check range page invalidation progress on page setup When the MM code is invalidating a range of pages, it calls the KVM kvm_mmu_notifier_invalidate_range_start() notifier function, which calls kvm_unmap_hva_range(), which arranges to flush all the TLBs for guest pages. However, the Linux PTEs for the range being flushed are still valid at that point. We are not supposed to establish any new references to pages in the range until the ...range_end() notifier gets called. The PPC-specific KVM code doesn't get any explicit notification of that; instead, we are supposed to use mmu_notifier_retry() to test whether we are or have been inside a range flush notifier pair while we have been referencing a page. This patch calls the mmu_notifier_retry() while mapping the guest page to ensure we are not referencing a page when in range invalidation. This call is inside a region locked with kvm->mmu_lock, which is the same lock that is called by the KVM MMU notifier functions, thus ensuring that no new notification can proceed while we are in the locked region. Signed-off-by: Bharat Bhushan Acked-by: Alexander Graf [Backported to 3.12 - Paolo] Reviewed-by: Bharat Bhushan Signed-off-by: Paolo Bonzini --- arch/powerpc/kvm/e500_mmu_host.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kvm/e500_mmu_host.c b/arch/powerpc/kvm/e500_mmu_host.c index 1c6a9d729df4..c65593abae8e 100644 --- a/arch/powerpc/kvm/e500_mmu_host.c +++ b/arch/powerpc/kvm/e500_mmu_host.c @@ -332,6 +332,13 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, unsigned long hva; int pfnmap = 0; int tsize = BOOK3E_PAGESZ_4K; + int ret = 0; + unsigned long mmu_seq; + struct kvm *kvm = vcpu_e500->vcpu.kvm; + + /* used to check for invalidations in progress */ + mmu_seq = kvm->mmu_notifier_seq; + smp_rmb(); /* * Translate guest physical to true physical, acquiring @@ -449,6 +456,12 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, gvaddr &= ~((tsize_pages << PAGE_SHIFT) - 1); } + spin_lock(&kvm->mmu_lock); + if (mmu_notifier_retry(kvm, mmu_seq)) { + ret = -EAGAIN; + goto out; + } + kvmppc_e500_ref_setup(ref, gtlbe, pfn); kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize, @@ -457,10 +470,13 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500, /* Clear i-cache for new pages */ kvmppc_mmu_flush_icache(pfn); +out: + spin_unlock(&kvm->mmu_lock); + /* Drop refcount on page, so that mmu notifiers can clear it */ kvm_release_pfn_clean(pfn); - return 0; + return ret; } /* XXX only map the one-one case, for now use TLB0 */ From b852c985010a77c850b7548d64bbb964ca462b02 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 10 Oct 2013 11:47:01 -0400 Subject: [PATCH 084/125] drm/radeon: re-enable sw ACR support on pre-DCE4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HW ACR support may have issues on some older chips, so use SW ACR for now until we've tested further. Signed-off-by: Alex Deucher CC: Rafał Miłecki --- drivers/gpu/drm/radeon/r600_hdmi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index e2ae1c237fb4..5b729319f27b 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -451,6 +451,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod } WREG32(HDMI0_ACR_PACKET_CONTROL + offset, + HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */ HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ WREG32(HDMI0_VBI_PACKET_CONTROL + offset, From 61875f30daf60305712e25b209ef41ced2635bad Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 21 Sep 2013 13:58:22 -0400 Subject: [PATCH 085/125] random: allow architectures to optionally define random_get_entropy() Allow architectures which have a disabled get_cycles() function to provide a random_get_entropy() function which provides a fine-grained, rapidly changing counter that can be used by the /dev/random driver. For example, an architecture might have a rapidly changing register used to control random TLB cache eviction, or DRAM refresh that doesn't meet the requirements of get_cycles(), but which is good enough for the needs of the random driver. Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- drivers/char/random.c | 8 ++++---- include/linux/timex.h | 14 ++++++++++++++ 2 files changed, 18 insertions(+), 4 deletions(-) diff --git a/drivers/char/random.c b/drivers/char/random.c index 92e6c67e1ae6..2d5daf9b58e9 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -643,7 +643,7 @@ struct timer_rand_state { */ void add_device_randomness(const void *buf, unsigned int size) { - unsigned long time = get_cycles() ^ jiffies; + unsigned long time = random_get_entropy() ^ jiffies; mix_pool_bytes(&input_pool, buf, size, NULL); mix_pool_bytes(&input_pool, &time, sizeof(time), NULL); @@ -680,7 +680,7 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num) goto out; sample.jiffies = jiffies; - sample.cycles = get_cycles(); + sample.cycles = random_get_entropy(); sample.num = num; mix_pool_bytes(&input_pool, &sample, sizeof(sample), NULL); @@ -747,7 +747,7 @@ void add_interrupt_randomness(int irq, int irq_flags) struct fast_pool *fast_pool = &__get_cpu_var(irq_randomness); struct pt_regs *regs = get_irq_regs(); unsigned long now = jiffies; - __u32 input[4], cycles = get_cycles(); + __u32 input[4], cycles = random_get_entropy(); input[0] = cycles ^ jiffies; input[1] = irq; @@ -1485,7 +1485,7 @@ unsigned int get_random_int(void) hash = get_cpu_var(get_random_int_hash); - hash[0] += current->pid + jiffies + get_cycles(); + hash[0] += current->pid + jiffies + random_get_entropy(); md5_transform(hash, random_int_secret); ret = hash[0]; put_cpu_var(get_random_int_hash); diff --git a/include/linux/timex.h b/include/linux/timex.h index b3726e61368e..da4c32dbb2aa 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -64,6 +64,20 @@ #include +#ifndef random_get_entropy +/* + * The random_get_entropy() function is used by the /dev/random driver + * in order to extract entropy via the relative unpredictability of + * when an interrupt takes places versus a high speed, fine-grained + * timing source or cycle counter. Since it will be occurred on every + * single interrupt, it must have a very low cost/overhead. + * + * By default we use get_cycles() for this purpose, but individual + * architectures may override this in their asm/timex.h header file. + */ +#define random_get_entropy() get_cycles() +#endif + /* * SHIFT_PLL is used as a dampening factor to define how much we * adjust the frequency correction for a given offset in PLL mode. From 0821f20d49d19f49e53b05ef6727e010c4b1f11d Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Fri, 9 Aug 2013 16:31:09 +0000 Subject: [PATCH 086/125] watchdog: hpwdt: Patch to ignore auxilary iLO devices This patch is to prevent hpwdt from loading on any auxilary iLO devices defined after the initial (or main) iLO device. All auxilary iLO devices will have a subsystem device ID set to 0x1979 in order for hpwdt to differentiate between the two types. Signed-off-by: Thomas Mingarelli Tested-by: Lisa Mitchell Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 5be5e3d14f79..19f3c3fc65f4 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -802,6 +802,12 @@ static int hpwdt_init_one(struct pci_dev *dev, return -ENODEV; } + /* + * Ignore all auxilary iLO devices with the following PCI ID + */ + if (dev->subsystem_device == 0x1979) + return -ENODEV; + if (pci_enable_device(dev)) { dev_warn(&dev->dev, "Not possible to enable PCI Device: 0x%x:0x%x.\n", From 0ff18e3734c248fa516b4be942b1196832ee936c Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Wed, 9 Oct 2013 09:26:21 +0800 Subject: [PATCH 087/125] kobject: show debug info on delayed kobject release Useful for locating buggy drivers on kernel oops. It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is hopefully only enabled in debug kernels (like maybe the Fedora rawhide one, or at developers), so being a bit more verbose is likely ok. Acked-by: Russell King Cc: Greg Kroah-Hartman Signed-off-by: Fengguang Wu Signed-off-by: Linus Torvalds --- lib/kobject.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/kobject.c b/lib/kobject.c index 669bf190d4fb..084f7b18d0c0 100644 --- a/lib/kobject.c +++ b/lib/kobject.c @@ -592,7 +592,7 @@ static void kobject_release(struct kref *kref) { struct kobject *kobj = container_of(kref, struct kobject, kref); #ifdef CONFIG_DEBUG_KOBJECT_RELEASE - pr_debug("kobject: '%s' (%p): %s, parent %p (delayed)\n", + pr_info("kobject: '%s' (%p): %s, parent %p (delayed)\n", kobject_name(kobj), kobj, __func__, kobj->parent); INIT_DELAYED_WORK(&kobj->release, kobject_delayed_cleanup); schedule_delayed_work(&kobj->release, HZ); From 2fe80d3bbf1c8bd9efc5b8154207c8dd104e7306 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 10 Oct 2013 17:31:15 -0700 Subject: [PATCH 088/125] bcache: Fix a null ptr deref regression Commit c0f04d88e46d ("bcache: Fix flushes in writeback mode") was fixing a reported data corruption bug, but it seems some last minute refactoring or rebasing introduced a null pointer deref. Signed-off-by: Kent Overstreet Cc: linux-stable # >= v3.10 Reported-by: Gabriel de Perthuis Signed-off-by: Linus Torvalds --- drivers/md/bcache/request.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c index 71eb233b9ace..b6a74bcbb08f 100644 --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -996,6 +996,7 @@ static void request_write(struct cached_dev *dc, struct search *s) closure_bio_submit(bio, cl, s->d); } else { bch_writeback_add(dc); + s->op.cache_bio = bio; if (bio->bi_rw & REQ_FLUSH) { /* Also need to send a flush to the backing device */ @@ -1008,8 +1009,6 @@ static void request_write(struct cached_dev *dc, struct search *s) flush->bi_private = cl; closure_bio_submit(flush, cl, s->d); - } else { - s->op.cache_bio = bio; } } out: From 4871c1588f92c6c13f4713a7009f25f217055807 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 9 Oct 2013 12:24:04 -0400 Subject: [PATCH 089/125] Btrfs: use right root when checking for hash collision btrfs_rename was using the root of the old dir instead of the root of the new dir when checking for a hash collision, so if you tried to move a file into a subvol it would freak out because it would see the file you are trying to move in its current root. This fixes the bug where this would fail btrfs subvol create test1 btrfs subvol create test2 mv test1 test2. Thanks to Chris Murphy for catching this, Cc: stable@vger.kernel.org Reported-by: Chris Murphy Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8af6c03953ad..3b4ffaf0cd52 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -7986,7 +7986,7 @@ static int btrfs_rename(struct inode *old_dir, struct dentry *old_dentry, /* check for collisions, even if the name isn't there */ - ret = btrfs_check_dir_item_collision(root, new_dir->i_ino, + ret = btrfs_check_dir_item_collision(dest, new_dir->i_ino, new_dentry->d_name.name, new_dentry->d_name.len); From 7bf811a595a895b7a886dcf218d0d34f97df76dc Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 7 Oct 2013 22:11:09 -0400 Subject: [PATCH 090/125] Btrfs: limit delalloc pages outside of find_delalloc_range Liu fixed part of this problem and unfortunately I steered him in slightly the wrong direction and so didn't completely fix the problem. The problem is we limit the size of the delalloc range we are looking for to max bytes and then we try to lock that range. If we fail to lock the pages in that range we will shrink the max bytes to a single page and re loop. However if our first page is inside of the delalloc range then we will end up limiting the end of the range to a period before our first page. This is illustrated below [0 -------- delalloc range --------- 256mb] [page] So find_delalloc_range will return with delalloc_start as 0 and end as 128mb, and then we will notice that delalloc_start < *start and adjust it up, but not adjust delalloc_end up, so things go sideways. To fix this we need to not limit the max bytes in find_delalloc_range, but in find_lock_delalloc_range and that way we don't end up with this confusion. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 43feb4663f5b..d8ea0cb200b4 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -1482,10 +1482,8 @@ static noinline u64 find_delalloc_range(struct extent_io_tree *tree, cur_start = state->end + 1; node = rb_next(node); total_bytes += state->end - state->start + 1; - if (total_bytes >= max_bytes) { - *end = *start + max_bytes - 1; + if (total_bytes >= max_bytes) break; - } if (!node) break; } @@ -1627,10 +1625,9 @@ again: /* * make sure to limit the number of pages we try to lock down - * if we're looping. */ - if (delalloc_end + 1 - delalloc_start > max_bytes && loops) - delalloc_end = delalloc_start + PAGE_CACHE_SIZE - 1; + if (delalloc_end + 1 - delalloc_start > max_bytes) + delalloc_end = delalloc_start + max_bytes - 1; /* step two, lock all the pages after the page that has start */ ret = lock_delalloc_pages(inode, locked_page, @@ -1641,8 +1638,7 @@ again: */ free_extent_state(cached_state); if (!loops) { - unsigned long offset = (*start) & (PAGE_CACHE_SIZE - 1); - max_bytes = PAGE_CACHE_SIZE - offset; + max_bytes = PAGE_CACHE_SIZE; loops = 1; goto again; } else { From 14927d95464956ffe8af4278331a6bfea94ab780 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 25 Sep 2013 21:47:43 +0800 Subject: [PATCH 091/125] Btrfs: insert orphan roots into fs radix tree Now we don't drop all the deleted snapshots/subvolumes before the space balance. It means we have to relocate the space which is held by the dead snapshots/subvolumes. So we must into them into fs radix tree, or we would forget to commit the change of them when doing transaction commit, and it would corrupt the metadata. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/root-tree.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/root-tree.c b/fs/btrfs/root-tree.c index 0b1f4ef8db98..ec71ea44d2b4 100644 --- a/fs/btrfs/root-tree.c +++ b/fs/btrfs/root-tree.c @@ -299,11 +299,6 @@ int btrfs_find_orphan_roots(struct btrfs_root *tree_root) continue; } - if (btrfs_root_refs(&root->root_item) == 0) { - btrfs_add_dead_root(root); - continue; - } - err = btrfs_init_fs_root(root); if (err) { btrfs_free_fs_root(root); @@ -318,6 +313,9 @@ int btrfs_find_orphan_roots(struct btrfs_root *tree_root) btrfs_free_fs_root(root); break; } + + if (btrfs_root_refs(&root->root_item) == 0) + btrfs_add_dead_root(root); } btrfs_free_path(path); From c00869f1ae6a8fa49802d5e60d843b7051a112ec Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 25 Sep 2013 21:47:44 +0800 Subject: [PATCH 092/125] Btrfs: fix oops caused by the space balance and dead roots When doing space balance and subvolume destroy at the same time, we met the following oops: kernel BUG at fs/btrfs/relocation.c:2247! RIP: 0010: [] prepare_to_merge+0x154/0x1f0 [btrfs] Call Trace: [] relocate_block_group+0x466/0x4e6 [btrfs] [] btrfs_relocate_block_group+0x143/0x275 [btrfs] [] btrfs_relocate_chunk.isra.27+0x5c/0x5a2 [btrfs] [] ? btrfs_item_key_to_cpu+0x15/0x31 [btrfs] [] ? btrfs_get_token_64+0x7e/0xcd [btrfs] [] ? btrfs_tree_read_unlock_blocking+0xb2/0xb7 [btrfs] [] btrfs_balance+0x9c7/0xb6f [btrfs] [] btrfs_ioctl_balance+0x234/0x2ac [btrfs] [] btrfs_ioctl+0xd87/0x1ef9 [btrfs] [] ? path_openat+0x234/0x4db [] ? __do_page_fault+0x31d/0x391 [] ? vma_link+0x74/0x94 [] vfs_ioctl+0x1d/0x39 [] do_vfs_ioctl+0x32d/0x3e2 [] SyS_ioctl+0x57/0x83 [] ? do_page_fault+0xe/0x10 [] system_call_fastpath+0x16/0x1b It is because we returned the error number if the reference of the root was 0 when doing space relocation. It was not right here, because though the root was dead(refs == 0), but the space it held still need be relocated, or we could not remove the block group. So in this case, we should return the root no matter it is dead or not. Signed-off-by: Miao Xie Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 9 +++++---- fs/btrfs/disk-io.h | 13 +++++++++++-- fs/btrfs/relocation.c | 2 +- 3 files changed, 17 insertions(+), 7 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4ae17ed13b32..62176ad89846 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -1561,8 +1561,9 @@ int btrfs_insert_fs_root(struct btrfs_fs_info *fs_info, return ret; } -struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, - struct btrfs_key *location) +struct btrfs_root *btrfs_get_fs_root(struct btrfs_fs_info *fs_info, + struct btrfs_key *location, + bool check_ref) { struct btrfs_root *root; int ret; @@ -1586,7 +1587,7 @@ struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, again: root = btrfs_lookup_fs_root(fs_info, location->objectid); if (root) { - if (btrfs_root_refs(&root->root_item) == 0) + if (check_ref && btrfs_root_refs(&root->root_item) == 0) return ERR_PTR(-ENOENT); return root; } @@ -1595,7 +1596,7 @@ again: if (IS_ERR(root)) return root; - if (btrfs_root_refs(&root->root_item) == 0) { + if (check_ref && btrfs_root_refs(&root->root_item) == 0) { ret = -ENOENT; goto fail; } diff --git a/fs/btrfs/disk-io.h b/fs/btrfs/disk-io.h index b71acd6e1e5b..5ce2a7da8b11 100644 --- a/fs/btrfs/disk-io.h +++ b/fs/btrfs/disk-io.h @@ -68,8 +68,17 @@ struct btrfs_root *btrfs_read_fs_root(struct btrfs_root *tree_root, int btrfs_init_fs_root(struct btrfs_root *root); int btrfs_insert_fs_root(struct btrfs_fs_info *fs_info, struct btrfs_root *root); -struct btrfs_root *btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, - struct btrfs_key *location); + +struct btrfs_root *btrfs_get_fs_root(struct btrfs_fs_info *fs_info, + struct btrfs_key *key, + bool check_ref); +static inline struct btrfs_root * +btrfs_read_fs_root_no_name(struct btrfs_fs_info *fs_info, + struct btrfs_key *location) +{ + return btrfs_get_fs_root(fs_info, location, true); +} + int btrfs_cleanup_fs_roots(struct btrfs_fs_info *fs_info); void btrfs_btree_balance_dirty(struct btrfs_root *root); void btrfs_btree_balance_dirty_nodelay(struct btrfs_root *root); diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index a5a26320503f..4a355726151e 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -588,7 +588,7 @@ static struct btrfs_root *read_fs_root(struct btrfs_fs_info *fs_info, else key.offset = (u64)-1; - return btrfs_read_fs_root_no_name(fs_info, &key); + return btrfs_get_fs_root(fs_info, &key, false); } #ifdef BTRFS_COMPAT_EXTENT_TREE_V0 From cdeb5c033f0389c44e5b36cafd623bdf44bbe25c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Sep 2013 02:28:37 +0400 Subject: [PATCH 093/125] rcar-hpbdma: remove shdma_free_irq() calls Commit c1c63a14f4f2419d093acd7164eccdff315baa86 (DMA: shdma: switch to managed resource allocation) got rid of shdma_free_irq() but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a709ac8ff1fe1af9 (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the calls and got broken: drivers/dma/sh/rcar-hpbdma.c: In function `hpb_dmae_alloc_chan_resources': drivers/dma/sh/rcar-hpbdma.c:435: error: implicit declaration of function `shdma_free_irq' Fix this compilation error by removing the remaining shdma_free_irq() calls. Reported-by: Simon Horman Signed-off-by: Sergei Shtylyov Tested-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 45a520281ce1..b2f50d8bd755 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -432,7 +432,6 @@ hpb_dmae_alloc_chan_resources(struct hpb_dmae_chan *hpb_chan, hpb_chan->xfer_mode = XFER_DOUBLE; } else { dev_err(hpb_chan->shdma_chan.dev, "DCR setting error"); - shdma_free_irq(&hpb_chan->shdma_chan); return -EINVAL; } @@ -614,7 +613,6 @@ static void hpb_dmae_chan_remove(struct hpb_dmae_device *hpbdev) shdma_for_each_chan(schan, &hpbdev->shdma_dev, i) { BUG_ON(!schan); - shdma_free_irq(schan); shdma_chan_remove(schan); } dma_dev->chancnt = 0; From 08d08bcdee30d3a28426bd60dfbdae44b36250bc Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Sep 2013 02:31:37 +0400 Subject: [PATCH 094/125] rcar-hpbdma: add parameter to set_slave() method Commit 4981c4dc194efb18f0e9a02f1b43e926f2f0d2bb (DMA: shdma: switch DT mode to use configuration data from a match table) added a new parameter to set_slave() method but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the old prototype which caused this warning: drivers/dma/sh/rcar-hpbdma.c:485: warning: initialization from incompatible pointer type The newly added parameter is used to override DMA slave address from 'struct hpb_dmae_slave_config', so we have to add the 'slave_addr' field to 'struct hpb_dmae_chan', conditionally assign it in set_slave() method, and return in slave_addr() method. Signed-off-by: Sergei Shtylyov Tested-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index b2f50d8bd755..ebad84591a6e 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -93,6 +93,7 @@ struct hpb_dmae_chan { void __iomem *base; const struct hpb_dmae_slave_config *cfg; char dev_id[16]; /* unique name per DMAC of channel */ + dma_addr_t slave_addr; }; struct hpb_dmae_device { @@ -445,7 +446,8 @@ hpb_dmae_alloc_chan_resources(struct hpb_dmae_chan *hpb_chan, return 0; } -static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, bool try) +static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, + dma_addr_t slave_addr, bool try) { struct hpb_dmae_chan *chan = to_chan(schan); const struct hpb_dmae_slave_config *sc = @@ -456,6 +458,7 @@ static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, bool try) if (try) return 0; chan->cfg = sc; + chan->slave_addr = slave_addr ? : sc->addr; return hpb_dmae_alloc_chan_resources(chan, sc); } @@ -467,7 +470,7 @@ static dma_addr_t hpb_dmae_slave_addr(struct shdma_chan *schan) { struct hpb_dmae_chan *chan = to_chan(schan); - return chan->cfg->addr; + return chan->slave_addr; } static struct shdma_desc *hpb_dmae_embedded_desc(void *buf, int i) From 2f6d8fad0a1636e675308088c35e863d066e0949 Mon Sep 17 00:00:00 2001 From: "Geyslan G. Bem" Date: Mon, 7 Oct 2013 19:19:58 -0300 Subject: [PATCH 095/125] dma: edma.c: remove edma_desc leakage Free memory allocated to edma_desc when failing to allocate slot. Signed-off-by: Geyslan G. Bem Signed-off-by: Vinod Koul --- drivers/dma/edma.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 098a8da450f0..3519111c566b 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -306,6 +306,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( EDMA_SLOT_ANY); if (echan->slot[i] < 0) { dev_err(dev, "Failed to allocate slot\n"); + kfree(edesc); return NULL; } } From e1264ebe9ff48e1b3e1dd11805eec9f5b143ab7c Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 11 Oct 2013 15:11:52 +1000 Subject: [PATCH 096/125] Revert "drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done" This reverts commit 6e1b4fdad5157bb9e88777d525704aba24389bee. This is part of a revert due to a userspace breakage, better explained in the revert of 1a1a4cbf4906a13c0c377f708df5d94168e7b582. Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 6 ------ drivers/gpu/drm/i915/intel_display.c | 27 +++++++++++---------------- drivers/gpu/drm/i915/intel_drv.h | 1 - 3 files changed, 11 insertions(+), 23 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index c27a21034a5e..52f5ad8037cc 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1351,12 +1351,6 @@ static int i915_load_modeset_init(struct drm_device *dev) */ intel_fbdev_initial_config(dev); - /* - * Must do this after fbcon init so that - * vgacon_save_screen() works during the handover. - */ - i915_disable_vga_mem(dev); - /* Only enable hotplug handling once the fbdev is fully set up. */ dev_priv->enable_hotplug_processing = true; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c89abd33124f..aaea3ec811ed 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10038,6 +10038,15 @@ static void i915_disable_vga(struct drm_device *dev) outb(SR01, VGA_SR_INDEX); sr1 = inb(VGA_SR_DATA); outb(sr1 | 1<<5, VGA_SR_DATA); + + /* Disable VGA memory on Intel HD */ + if (HAS_PCH_SPLIT(dev)) { + outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); + vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | + VGA_RSRC_NORMAL_IO | + VGA_RSRC_NORMAL_MEM); + } + vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); udelay(300); @@ -10045,7 +10054,7 @@ static void i915_disable_vga(struct drm_device *dev) POSTING_READ(vga_reg); } -static void i915_enable_vga_mem(struct drm_device *dev) +static void i915_enable_vga(struct drm_device *dev) { /* Enable VGA memory on Intel HD */ if (HAS_PCH_SPLIT(dev)) { @@ -10059,19 +10068,6 @@ static void i915_enable_vga_mem(struct drm_device *dev) } } -void i915_disable_vga_mem(struct drm_device *dev) -{ - /* Disable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); - outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); - } -} - void intel_modeset_init_hw(struct drm_device *dev) { intel_init_power_well(dev); @@ -10350,7 +10346,6 @@ void i915_redisable_vga(struct drm_device *dev) if (I915_READ(vga_reg) != VGA_DISP_DISABLE) { DRM_DEBUG_KMS("Something enabled VGA plane, disabling it\n"); i915_disable_vga(dev); - i915_disable_vga_mem(dev); } } @@ -10564,7 +10559,7 @@ void intel_modeset_cleanup(struct drm_device *dev) intel_disable_fbc(dev); - i915_enable_vga_mem(dev); + i915_enable_vga(dev); intel_disable_gt_powersave(dev); diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index 28cae80495e2..9b7b68fd5d47 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -793,6 +793,5 @@ extern void hsw_pc8_disable_interrupts(struct drm_device *dev); extern void hsw_pc8_restore_interrupts(struct drm_device *dev); extern void intel_aux_display_runtime_get(struct drm_i915_private *dev_priv); extern void intel_aux_display_runtime_put(struct drm_i915_private *dev_priv); -extern void i915_disable_vga_mem(struct drm_device *dev); #endif /* __INTEL_DRV_H__ */ From ebff5fa9d545574324095d9c6a3cb80c9157abc5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 11 Oct 2013 15:12:04 +1000 Subject: [PATCH 097/125] Revert "i915: Update VGA arbiter support for newer devices" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 81b5c7bc8de3e6f63419139c2fc91bf81dea8a7d. Adding drm/i915 into the vga arbiter chain means that X (in a piece of well-meant paranoia) will do a get/put on the vga decoding around _every_ accel call down into the ddx. Which results in some nice performance disasters [1]. This really breaks userspace, by disabling DRI for everyone, and stops OpenGL from working, this isn't limited to just the i915 but both the integrated and discrete GPUs on multi-gpu systems, in other words this causes untold worlds of pain, Ville tried to come up with a Great Hack to fiddle the required VGA I/O ops behind everyone's back using stop_machine, but that didn't really work out [2]. Given that we're fairly late in the -rc stage for such games let's just revert this all. One thing we might want to keep is to delay the disabling of the vga decoding until the fbdev emulation and the fbcon screen is set up. If we kill vga mem decoding beforehand fbcon can end up with a white square in the top-left corner it tried to save from the vga memory for a seamless transition. And we have bug reports on older platforms which seem to match these symptoms. But again that's something to play around with in -next. References: [1] http://lists.x.org/archives/xorg-devel/2013-September/037763.html References: [2] http://www.spinics.net/lists/intel-gfx/msg34062.html Cc: Alex Williamson Cc: Ville SyrjƤlƤ Cc: Chris Wilson Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_dma.c | 9 +++------ drivers/gpu/drm/i915/intel_display.c | 25 ------------------------- include/linux/vgaarb.h | 7 ------- 3 files changed, 3 insertions(+), 38 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 52f5ad8037cc..d5c784d48671 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1290,12 +1290,9 @@ static int i915_load_modeset_init(struct drm_device *dev) * then we do not take part in VGA arbitration and the * vga_client_register() fails with -ENODEV. */ - if (!HAS_PCH_SPLIT(dev)) { - ret = vga_client_register(dev->pdev, dev, NULL, - i915_vga_set_decode); - if (ret && ret != -ENODEV) - goto out; - } + ret = vga_client_register(dev->pdev, dev, NULL, i915_vga_set_decode); + if (ret && ret != -ENODEV) + goto out; intel_register_dsm_handler(); diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index aaea3ec811ed..581fb4b2f766 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -10038,15 +10038,6 @@ static void i915_disable_vga(struct drm_device *dev) outb(SR01, VGA_SR_INDEX); sr1 = inb(VGA_SR_DATA); outb(sr1 | 1<<5, VGA_SR_DATA); - - /* Disable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - outb(inb(VGA_MSR_READ) & ~VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - } - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); udelay(300); @@ -10054,20 +10045,6 @@ static void i915_disable_vga(struct drm_device *dev) POSTING_READ(vga_reg); } -static void i915_enable_vga(struct drm_device *dev) -{ - /* Enable VGA memory on Intel HD */ - if (HAS_PCH_SPLIT(dev)) { - vga_get_uninterruptible(dev->pdev, VGA_RSRC_LEGACY_IO); - outb(inb(VGA_MSR_READ) | VGA_MSR_MEM_EN, VGA_MSR_WRITE); - vga_set_legacy_decoding(dev->pdev, VGA_RSRC_LEGACY_IO | - VGA_RSRC_LEGACY_MEM | - VGA_RSRC_NORMAL_IO | - VGA_RSRC_NORMAL_MEM); - vga_put(dev->pdev, VGA_RSRC_LEGACY_IO); - } -} - void intel_modeset_init_hw(struct drm_device *dev) { intel_init_power_well(dev); @@ -10559,8 +10536,6 @@ void intel_modeset_cleanup(struct drm_device *dev) intel_disable_fbc(dev); - i915_enable_vga(dev); - intel_disable_gt_powersave(dev); ironlake_teardown_rc6(dev); diff --git a/include/linux/vgaarb.h b/include/linux/vgaarb.h index 80cf8173a65b..2c02f3a8d2ba 100644 --- a/include/linux/vgaarb.h +++ b/include/linux/vgaarb.h @@ -65,15 +65,8 @@ struct pci_dev; * out of the arbitration process (and can be safe to take * interrupts at any time. */ -#if defined(CONFIG_VGA_ARB) extern void vga_set_legacy_decoding(struct pci_dev *pdev, unsigned int decodes); -#else -static inline void vga_set_legacy_decoding(struct pci_dev *pdev, - unsigned int decodes) -{ -} -#endif /** * vga_get - acquire & locks VGA resources From 3f0116c3238a96bc18ad4b4acefe4e7be32fa861 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 10 Oct 2013 10:16:30 +0200 Subject: [PATCH 098/125] compiler/gcc4: Add quirk for 'asm goto' miscompilation bug Fengguang Wu, Oleg Nesterov and Peter Zijlstra tracked down a kernel crash to a GCC bug: GCC miscompiles certain 'asm goto' constructs, as outlined here: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 Implement a workaround suggested by Jakub Jelinek. Reported-and-tested-by: Fengguang Wu Reported-by: Oleg Nesterov Reported-by: Peter Zijlstra Suggested-by: Jakub Jelinek Reviewed-by: Richard Henderson Cc: Linus Torvalds Cc: Andrew Morton Cc: Signed-off-by: Ingo Molnar --- arch/arm/include/asm/jump_label.h | 2 +- arch/mips/include/asm/jump_label.h | 2 +- arch/powerpc/include/asm/jump_label.h | 2 +- arch/s390/include/asm/jump_label.h | 2 +- arch/sparc/include/asm/jump_label.h | 2 +- arch/x86/include/asm/cpufeature.h | 6 +++--- arch/x86/include/asm/jump_label.h | 2 +- arch/x86/include/asm/mutex_64.h | 4 ++-- include/linux/compiler-gcc4.h | 15 +++++++++++++++ 9 files changed, 26 insertions(+), 11 deletions(-) diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h index bfc198c75913..863c892b4aaa 100644 --- a/arch/arm/include/asm/jump_label.h +++ b/arch/arm/include/asm/jump_label.h @@ -16,7 +16,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:\n\t" + asm_volatile_goto("1:\n\t" JUMP_LABEL_NOP "\n\t" ".pushsection __jump_table, \"aw\"\n\t" ".word 1b, %l[l_yes], %c0\n\t" diff --git a/arch/mips/include/asm/jump_label.h b/arch/mips/include/asm/jump_label.h index 4d6d77ed9b9d..e194f957ca8c 100644 --- a/arch/mips/include/asm/jump_label.h +++ b/arch/mips/include/asm/jump_label.h @@ -22,7 +22,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:\tnop\n\t" + asm_volatile_goto("1:\tnop\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" WORD_INSN " 1b, %l[l_yes], %0\n\t" diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h index ae098c438f00..f016bb699b5f 100644 --- a/arch/powerpc/include/asm/jump_label.h +++ b/arch/powerpc/include/asm/jump_label.h @@ -19,7 +19,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:\n\t" + asm_volatile_goto("1:\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" JUMP_ENTRY_TYPE "1b, %l[l_yes], %c0\n\t" diff --git a/arch/s390/include/asm/jump_label.h b/arch/s390/include/asm/jump_label.h index 6c32190dc73e..346b1c85ffb4 100644 --- a/arch/s390/include/asm/jump_label.h +++ b/arch/s390/include/asm/jump_label.h @@ -15,7 +15,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("0: brcl 0,0\n" + asm_volatile_goto("0: brcl 0,0\n" ".pushsection __jump_table, \"aw\"\n" ASM_ALIGN "\n" ASM_PTR " 0b, %l[label], %0\n" diff --git a/arch/sparc/include/asm/jump_label.h b/arch/sparc/include/asm/jump_label.h index 5080d16a832f..ec2e2e2aba7d 100644 --- a/arch/sparc/include/asm/jump_label.h +++ b/arch/sparc/include/asm/jump_label.h @@ -9,7 +9,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:\n\t" + asm_volatile_goto("1:\n\t" "nop\n\t" "nop\n\t" ".pushsection __jump_table, \"aw\"\n\t" diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index d3f5c63078d8..89270b4318db 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -374,7 +374,7 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) * Catch too early usage of this before alternatives * have run. */ - asm goto("1: jmp %l[t_warn]\n" + asm_volatile_goto("1: jmp %l[t_warn]\n" "2:\n" ".section .altinstructions,\"a\"\n" " .long 1b - .\n" @@ -388,7 +388,7 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) #endif - asm goto("1: jmp %l[t_no]\n" + asm_volatile_goto("1: jmp %l[t_no]\n" "2:\n" ".section .altinstructions,\"a\"\n" " .long 1b - .\n" @@ -453,7 +453,7 @@ static __always_inline __pure bool _static_cpu_has_safe(u16 bit) * have. Thus, we force the jump to the widest, 4-byte, signed relative * offset even though the last would often fit in less bytes. */ - asm goto("1: .byte 0xe9\n .long %l[t_dynamic] - 2f\n" + asm_volatile_goto("1: .byte 0xe9\n .long %l[t_dynamic] - 2f\n" "2:\n" ".section .altinstructions,\"a\"\n" " .long 1b - .\n" /* src offset */ diff --git a/arch/x86/include/asm/jump_label.h b/arch/x86/include/asm/jump_label.h index 64507f35800c..6a2cefb4395a 100644 --- a/arch/x86/include/asm/jump_label.h +++ b/arch/x86/include/asm/jump_label.h @@ -18,7 +18,7 @@ static __always_inline bool arch_static_branch(struct static_key *key) { - asm goto("1:" + asm_volatile_goto("1:" ".byte " __stringify(STATIC_KEY_INIT_NOP) "\n\t" ".pushsection __jump_table, \"aw\" \n\t" _ASM_ALIGN "\n\t" diff --git a/arch/x86/include/asm/mutex_64.h b/arch/x86/include/asm/mutex_64.h index e7e6751648ed..07537a44216e 100644 --- a/arch/x86/include/asm/mutex_64.h +++ b/arch/x86/include/asm/mutex_64.h @@ -20,7 +20,7 @@ static inline void __mutex_fastpath_lock(atomic_t *v, void (*fail_fn)(atomic_t *)) { - asm volatile goto(LOCK_PREFIX " decl %0\n" + asm_volatile_goto(LOCK_PREFIX " decl %0\n" " jns %l[exit]\n" : : "m" (v->counter) : "memory", "cc" @@ -75,7 +75,7 @@ static inline int __mutex_fastpath_lock_retval(atomic_t *count) static inline void __mutex_fastpath_unlock(atomic_t *v, void (*fail_fn)(atomic_t *)) { - asm volatile goto(LOCK_PREFIX " incl %0\n" + asm_volatile_goto(LOCK_PREFIX " incl %0\n" " jg %l[exit]\n" : : "m" (v->counter) : "memory", "cc" diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 842de225055f..ded429966c1f 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -65,6 +65,21 @@ #define __visible __attribute__((externally_visible)) #endif +/* + * GCC 'asm goto' miscompiles certain code sequences: + * + * http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670 + * + * Work it around via a compiler barrier quirk suggested by Jakub Jelinek. + * Fixed in GCC 4.8.2 and later versions. + * + * (asm goto is automatically volatile - the naming reflects this.) + */ +#if GCC_VERSION <= 40801 +# define asm_volatile_goto(x...) do { asm goto(x); asm (""); } while (0) +#else +# define asm_volatile_goto(x...) do { asm goto(x); } while (0) +#endif #ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP #if GCC_VERSION >= 40400 From 88cfcf86aa3ada84d97195bcad74f4dadb4ae23b Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 11 Oct 2013 10:18:45 +0200 Subject: [PATCH 099/125] ALSA: hda - Fix microphone for Sony VAIO Pro 13 (Haswell model) The external mic showed up with a precense detect of "always present", essentially disabling the internal mic. Therefore turn off presence detection for this pin. Note: The external mic seems not yet working, but an internal mic is certainly better than no mic at all. Cc: stable@vger.kernel.org BugLink: https://bugs.launchpad.net/bugs/1227093 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ed9deb66f593..ae847fe006c8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3528,6 +3528,7 @@ enum { ALC269_FIXUP_HP_GPIO_LED, ALC269_FIXUP_INV_DMIC, ALC269_FIXUP_LENOVO_DOCK, + ALC286_FIXUP_SONY_MIC_NO_PRESENCE, ALC269_FIXUP_PINCFG_NO_HP_TO_LINEOUT, ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, ALC269_FIXUP_DELL2_MIC_NO_PRESENCE, @@ -3740,6 +3741,13 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc_fixup_headset_mode_no_hp_mic, }, + [ALC286_FIXUP_SONY_MIC_NO_PRESENCE] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x18, 0x01a1913c }, /* use as headset mic, without its own jack detect */ + { } + }, + }, [ALC269_FIXUP_ASUS_X101_FUNC] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_x101_headset_mic, @@ -3894,6 +3902,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x8398, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS P1005", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x8516, "ASUS X101CH", ALC269_FIXUP_ASUS_X101), + SND_PCI_QUIRK(0x104d, 0x90b6, "Sony VAIO Pro 13", ALC286_FIXUP_SONY_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x104d, 0x9073, "Sony VAIO", ALC275_FIXUP_SONY_VAIO_GPIO2), SND_PCI_QUIRK(0x104d, 0x907b, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), SND_PCI_QUIRK(0x104d, 0x9084, "Sony VAIO", ALC275_FIXUP_SONY_HWEQ), From 7c478f03372ad2cf434fde62082895bfcb6e6e89 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 11 Oct 2013 10:18:46 +0200 Subject: [PATCH 100/125] ALSA: hda - Add a headset mic model for ALC269 and friends Using the headset mic model will cause the headset mic to be labeled "headset mic" instead of just "mic". Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- Documentation/sound/alsa/HD-Audio-Models.txt | 1 + sound/pci/hda/patch_realtek.c | 15 +++++++++++++++ 2 files changed, 16 insertions(+) diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index f911e3656209..85c362d8ea34 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -28,6 +28,7 @@ ALC269/270/275/276/28x/29x alc269-dmic Enable ALC269(VA) digital mic workaround alc271-dmic Enable ALC271X digital mic workaround inv-dmic Inverted internal mic workaround + headset-mic Indicates a combined headset (headphone+mic) jack lenovo-dock Enables docking station I/O for some Lenovos dell-headset-multi Headset jack, which can also be used as mic-in dell-headset-dock Headset jack (without mic-in), and also dock I/O diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index ae847fe006c8..79e6fe7a863a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2819,6 +2819,15 @@ static void alc269_fixup_hweq(struct hda_codec *codec, alc_write_coef_idx(codec, 0x1e, coef | 0x80); } +static void alc269_fixup_headset_mic(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + struct alc_spec *spec = codec->spec; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) + spec->parse_flags |= HDA_PINCFG_HEADSET_MIC; +} + static void alc271_fixup_dmic(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -3516,6 +3525,7 @@ enum { ALC271_FIXUP_DMIC, ALC269_FIXUP_PCM_44K, ALC269_FIXUP_STEREO_DMIC, + ALC269_FIXUP_HEADSET_MIC, ALC269_FIXUP_QUANTA_MUTE, ALC269_FIXUP_LIFEBOOK, ALC269_FIXUP_AMIC, @@ -3615,6 +3625,10 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_stereo_dmic, }, + [ALC269_FIXUP_HEADSET_MIC] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc269_fixup_headset_mic, + }, [ALC269_FIXUP_QUANTA_MUTE] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_quanta_mute, @@ -3988,6 +4002,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC269_FIXUP_STEREO_DMIC, .name = "alc269-dmic"}, {.id = ALC271_FIXUP_DMIC, .name = "alc271-dmic"}, {.id = ALC269_FIXUP_INV_DMIC, .name = "inv-dmic"}, + {.id = ALC269_FIXUP_HEADSET_MIC, .name = "headset-mic"}, {.id = ALC269_FIXUP_LENOVO_DOCK, .name = "lenovo-dock"}, {.id = ALC269_FIXUP_HP_GPIO_LED, .name = "hp-gpio-led"}, {.id = ALC269_FIXUP_DELL1_MIC_NO_PRESENCE, .name = "dell-headset-multi"}, From fbc78ad62471c54ca5c10c6a7d440d1ca64d74e7 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 11 Oct 2013 13:46:04 +0200 Subject: [PATCH 101/125] ALSA: hda - Sony VAIO Pro 13 (haswell) now has a working headset jack Just got the positive confirmation from a tester: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1227093/comments/28 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 79e6fe7a863a..bf313bea7085 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3761,6 +3761,8 @@ static const struct hda_fixup alc269_fixups[] = { { 0x18, 0x01a1913c }, /* use as headset mic, without its own jack detect */ { } }, + .chained = true, + .chain_id = ALC269_FIXUP_HEADSET_MIC }, [ALC269_FIXUP_ASUS_X101_FUNC] = { .type = HDA_FIXUP_FUNC, From 5b24282846c064ee90d40fcb3a8f63b8e754fd28 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Thu, 10 Oct 2013 19:33:57 +0530 Subject: [PATCH 102/125] ARC: Ignore ptrace SETREGSET request for synthetic register "stop_pc" ARCompact TRAP_S insn used for breakpoints, commits before exception is taken (updating architectural PC). So ptregs->ret contains next-PC and not the breakpoint PC itself. This is different from other restartable exceptions such as TLB Miss where ptregs->ret has exact faulting PC. gdb needs to know exact-PC hence ARC ptrace GETREGSET provides for @stop_pc which returns ptregs->ret vs. EFA depending on the situation. However, writing stop_pc (SETREGSET request), which updates ptregs->ret doesn't makes sense stop_pc doesn't always correspond to that reg as described above. This was not an issue so far since user_regs->ret / user_regs->stop_pc had same value and both writing to ptregs->ret was OK, needless, but NOT broken, hence not observed. With gdb "jump", they diverge, and user_regs->ret updating ptregs is overwritten immediately with stop_pc, which this patch fixes. Reported-by: Anton Kolesov Signed-off-by: Vineet Gupta --- arch/arc/kernel/ptrace.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arc/kernel/ptrace.c b/arch/arc/kernel/ptrace.c index 333238564b67..5d76706139dd 100644 --- a/arch/arc/kernel/ptrace.c +++ b/arch/arc/kernel/ptrace.c @@ -102,7 +102,7 @@ static int genregs_set(struct task_struct *target, REG_IGNORE_ONE(pad2); REG_IN_CHUNK(callee, efa, cregs); /* callee_regs[r25..r13] */ REG_IGNORE_ONE(efa); /* efa update invalid */ - REG_IN_ONE(stop_pc, &ptregs->ret); /* stop_pc: PC update */ + REG_IGNORE_ONE(stop_pc); /* PC updated via @ret */ return ret; } From 6e4ea8e33b2057b85d75175dd89b93f5e26de3bc Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Thu, 10 Oct 2013 20:05:35 -0400 Subject: [PATCH 103/125] ext4: fix memory leak in xattr If we take the 2nd retry path in ext4_expand_extra_isize_ea, we potentionally return from the function without having freed these allocations. If we don't do the return, we over-write the previous allocation pointers, so we leak either way. Spotted with Coverity. [ Fixed by tytso to set is and bs to NULL after freeing these pointers, in case in the retry loop we later end up triggering an error causing a jump to cleanup, at which point we could have a double free bug. -- Ted ] Signed-off-by: Dave Jones Signed-off-by: "Theodore Ts'o" Reviewed-by: Eric Sandeen Cc: stable@vger.kernel.org --- fs/ext4/xattr.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index c081e34f717f..03e9bebba198 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1350,6 +1350,8 @@ retry: s_min_extra_isize) { tried_min_extra_isize++; new_extra_isize = s_min_extra_isize; + kfree(is); is = NULL; + kfree(bs); bs = NULL; goto retry; } error = -1; From 9d05746e7b16d8565dddbe3200faa1e669d23bbf Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 30 Sep 2013 08:35:10 -0700 Subject: [PATCH 104/125] vfs: allow O_PATH file descriptors for fstatfs() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Olga reported that file descriptors opened with O_PATH do not work with fstatfs(), found during further development of ksh93's thread support. There is no reason to not allow O_PATH file descriptors here (fstatfs is very much a path operation), so use "fdget_raw()". See commit 55815f70147d ("vfs: make O_PATH file descriptors usable for 'fstat()'") for a very similar issue reported for fstat() by the same team. Reported-and-tested-by: Š¾Š»ŃŒŠ³Š° ŠŗрыŠ¶Š°Š½Š¾Š²ŃŠŗŠ°Ń Acked-by: Al Viro Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: Linus Torvalds --- fs/statfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/statfs.c b/fs/statfs.c index c219e733f553..083dc0ac9140 100644 --- a/fs/statfs.c +++ b/fs/statfs.c @@ -94,7 +94,7 @@ retry: int fd_statfs(int fd, struct kstatfs *st) { - struct fd f = fdget(fd); + struct fd f = fdget_raw(fd); int error = -EBADF; if (f.file) { error = vfs_statfs(&f.file->f_path, st); From 320c90be7ba1c371e882edff57272a89b213d136 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 5 Sep 2013 11:33:15 +0200 Subject: [PATCH 105/125] parisc: Export flush_cache_page() (needed by lustre) ERROR: "flush_cache_page" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined! Signed-off-by: Geert Uytterhoeven Signed-off-by: Helge Deller --- arch/parisc/kernel/cache.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index c035673209f7..b521c0adf4ec 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -602,6 +602,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long __flush_cache_page(vma, vmaddr, PFN_PHYS(pfn)); } } +EXPORT_SYMBOL_GPL(flush_cache_page); #ifdef CONFIG_PARISC_TMPALIAS From 528d8eb20a3053d72cb0cea486418aa602d9e1f1 Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Thu, 12 Sep 2013 00:07:18 +0800 Subject: [PATCH 106/125] parisc: kill SMP single function call interrupt Commit 9a46ad6d6df3b54 "smp: make smp_call_function_many() use logic similar to smp_call_function_single()" has unified the way to handle single and multiple cross-CPU function calls. Now only one interrupt is needed for architecture specific code to support generic SMP function call interfaces, so kill the redundant single function call interrupt. Signed-off-by: Jiang Liu Cc: Jiang Liu Signed-off-by: Helge Deller --- arch/parisc/kernel/smp.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c index 8a252f2d6c08..2b96602e812f 100644 --- a/arch/parisc/kernel/smp.c +++ b/arch/parisc/kernel/smp.c @@ -72,7 +72,6 @@ enum ipi_message_type { IPI_NOP=0, IPI_RESCHEDULE=1, IPI_CALL_FUNC, - IPI_CALL_FUNC_SINGLE, IPI_CPU_START, IPI_CPU_STOP, IPI_CPU_TEST @@ -164,11 +163,6 @@ ipi_interrupt(int irq, void *dev_id) generic_smp_call_function_interrupt(); break; - case IPI_CALL_FUNC_SINGLE: - smp_debug(100, KERN_DEBUG "CPU%d IPI_CALL_FUNC_SINGLE\n", this_cpu); - generic_smp_call_function_single_interrupt(); - break; - case IPI_CPU_START: smp_debug(100, KERN_DEBUG "CPU%d IPI_CPU_START\n", this_cpu); break; @@ -260,7 +254,7 @@ void arch_send_call_function_ipi_mask(const struct cpumask *mask) void arch_send_call_function_single_ipi(int cpu) { - send_IPI_single(cpu, IPI_CALL_FUNC_SINGLE); + send_IPI_single(cpu, IPI_CALL_FUNC); } /* From ec7c241953d14af097d941de56348c55e4e9ac5d Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 9 Oct 2013 23:10:14 +0200 Subject: [PATCH 107/125] parisc: remove unused syscall_ipi() function. Signed-off-by: Helge Deller --- arch/parisc/kernel/traps.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index 04e47c6a4562..ebc877c28583 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -291,11 +291,6 @@ void die_if_kernel(char *str, struct pt_regs *regs, long err) do_exit(SIGSEGV); } -int syscall_ipi(int (*syscall) (struct pt_regs *), struct pt_regs *regs) -{ - return syscall(regs); -} - /* gdb uses break 4,8 */ #define GDB_BREAK_INSN 0x10004 static void handle_gdb_break(struct pt_regs *regs, int wot) From a60ac4b5f0b630889a01293db52ac65003a01e98 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 9 Oct 2013 23:12:46 +0200 Subject: [PATCH 108/125] parisc: mark parisc_terminate() noreturn and cold. Signed-off-by: Helge Deller --- arch/parisc/include/asm/traps.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/parisc/include/asm/traps.h b/arch/parisc/include/asm/traps.h index 1945f995f2df..4736020ba5ea 100644 --- a/arch/parisc/include/asm/traps.h +++ b/arch/parisc/include/asm/traps.h @@ -6,7 +6,7 @@ struct pt_regs; /* traps.c */ void parisc_terminate(char *msg, struct pt_regs *regs, - int code, unsigned long offset); + int code, unsigned long offset) __noreturn __cold; /* mm/fault.c */ void do_page_fault(struct pt_regs *regs, unsigned long code, From 59b33f148cc08fb33cbe823fca1e34f7f023765e Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Tue, 1 Oct 2013 21:54:46 +0200 Subject: [PATCH 109/125] parisc: fix interruption handler to respect pagefault_disable() Running an "echo t > /proc/sysrq-trigger" crashes the parisc kernel. The problem is, that in print_worker_info() we try to read the workqueue info via the probe_kernel_read() functions which use pagefault_disable() to avoid crashes like this: probe_kernel_read(&pwq, &worker->current_pwq, sizeof(pwq)); probe_kernel_read(&wq, &pwq->wq, sizeof(wq)); probe_kernel_read(name, wq->name, sizeof(name) - 1); The problem here is, that the first probe_kernel_read(&pwq) might return zero in pwq and as such the following probe_kernel_reads() try to access contents of the page zero which is read protected and generate a kernel segfault. With this patch we fix the interruption handler to call parisc_terminate() directly only if pagefault_disable() was not called (in which case preempt_count()==0). Otherwise we hand over to the pagefault handler which will try to look up the faulting address in the fixup tables. Signed-off-by: Helge Deller Cc: # v3.0+ Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/kernel/traps.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index ebc877c28583..1cd1d0c83b6d 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -800,14 +800,14 @@ void notrace handle_interruption(int code, struct pt_regs *regs) else { /* - * The kernel should never fault on its own address space. + * The kernel should never fault on its own address space, + * unless pagefault_disable() was called before. */ - if (fault_space == 0) + if (fault_space == 0 && !in_atomic()) { pdc_chassis_send_status(PDC_CHASSIS_DIRECT_PANIC); parisc_terminate("Kernel Fault", regs, code, fault_address); - } } From 2d8b22de6e5241a6f27f7f290f027223156a7d3f Mon Sep 17 00:00:00 2001 From: John David Anglin Date: Sat, 5 Oct 2013 10:55:36 -0400 Subject: [PATCH 110/125] parisc: optimize variable initialization in do_page_fault The attached change defers the initialization of the variables tsk, mm and flags until they are needed. As a result, the code won't crash if a kernel probe is done with a corrupt context and the code will be better optimized. Signed-off-by: John David Anglin Signed-off-by: Helge Deller --- arch/parisc/mm/fault.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index 00c0ed333a3d..0293588d5b8c 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -171,20 +171,25 @@ void do_page_fault(struct pt_regs *regs, unsigned long code, unsigned long address) { struct vm_area_struct *vma, *prev_vma; - struct task_struct *tsk = current; - struct mm_struct *mm = tsk->mm; + struct task_struct *tsk; + struct mm_struct *mm; unsigned long acc_type; int fault; - unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; + unsigned int flags; - if (in_atomic() || !mm) + if (in_atomic()) goto no_context; + tsk = current; + mm = tsk->mm; + if (!mm) + goto no_context; + + flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; if (user_mode(regs)) flags |= FAULT_FLAG_USER; acc_type = parisc_acctyp(code, regs->iir); - if (acc_type & VM_WRITE) flags |= FAULT_FLAG_WRITE; retry: From db080f9c530f78dad661257885a1893506077068 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 9 Oct 2013 23:47:03 +0200 Subject: [PATCH 111/125] parisc: let probe_kernel_read() capture access to page zero Signed-off-by: Helge Deller --- arch/parisc/lib/memcpy.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c index ac4370b1ca40..b5507ec06b84 100644 --- a/arch/parisc/lib/memcpy.c +++ b/arch/parisc/lib/memcpy.c @@ -56,7 +56,7 @@ #ifdef __KERNEL__ #include #include -#include +#include #define s_space "%%sr1" #define d_space "%%sr2" #else @@ -524,4 +524,17 @@ EXPORT_SYMBOL(copy_to_user); EXPORT_SYMBOL(copy_from_user); EXPORT_SYMBOL(copy_in_user); EXPORT_SYMBOL(memcpy); + +long probe_kernel_read(void *dst, const void *src, size_t size) +{ + unsigned long addr = (unsigned long)src; + + if (size < 0 || addr < PAGE_SIZE) + return -EFAULT; + + /* check for I/O space F_EXTEND(0xfff00000) access as well? */ + + return __probe_kernel_read(dst, src, size); +} + #endif From 4d594dd3028ba8cdfcbd854bde3811a1ee4e36d7 Mon Sep 17 00:00:00 2001 From: Yuvaraj Kumar C D Date: Wed, 18 Sep 2013 15:41:53 +0530 Subject: [PATCH 112/125] ARM: exynos: dts: Update 5250 arch timer node with clock frequency Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [] (unwind_backtrace+0x0/0xf4) from [] (show_stack+0x10/0x14) [] (show_stack+0x10/0x14) from [] (dump_stack+0x7c/0xb0) [] (dump_stack+0x7c/0xb0) from [] (Ldiv0_64+0x8/0x18) [] (Ldiv0_64+0x8/0x18) from [] (clockevents_config.part.2+0x1c/0x74) [] (clockevents_config.part.2+0x1c/0x74) from [] (clockevents_config_and_register+0x20/0x2c) [] (clockevents_config_and_register+0x20/0x2c) from [] (arch_timer_setup+0xa8/0x134) [] (arch_timer_setup+0xa8/0x134) from [] (arch_timer_init+0x1f4/0x24c) [] (arch_timer_init+0x1f4/0x24c) from [] (clocksource_of_init+0x34/0x58) [] (clocksource_of_init+0x34/0x58) from [] (time_init+0x20/0x2c) [] (time_init+0x20/0x2c) from [] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: Yuvaraj Kumar C D [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: Olof Johansson --- arch/arm/boot/dts/exynos5250.dtsi | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 7d7cc777ff7b..bbac42a78ce5 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -96,6 +96,11 @@ <1 14 0xf08>, <1 11 0xf08>, <1 10 0xf08>; + /* Unfortunately we need this since some versions of U-Boot + * on Exynos don't set the CNTFRQ register, so we need the + * value from DT. + */ + clock-frequency = <24000000>; }; mct@101C0000 { From 8612ed0d97abcf1c016d34755b7cf2060de71963 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 23 Aug 2013 11:40:59 +0300 Subject: [PATCH 113/125] watchdog: ts72xx_wdt: locking bug in ioctl Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: Dan Carpenter Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ts72xx_wdt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c index 42913f131dc2..c9b0c627fe7e 100644 --- a/drivers/watchdog/ts72xx_wdt.c +++ b/drivers/watchdog/ts72xx_wdt.c @@ -310,7 +310,8 @@ static long ts72xx_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + error = put_user(0, p); + break; case WDIOC_KEEPALIVE: ts72xx_wdt_kick(wdt); From 4c4e45669de475573b15d968a6dca8d00124c9ad Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 23 Sep 2013 19:16:57 +0900 Subject: [PATCH 114/125] watchdog: kempld_wdt: Fix bit mask definition STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: Jingoo Han Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/kempld_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c index 491419e0772a..5c3d4df63e68 100644 --- a/drivers/watchdog/kempld_wdt.c +++ b/drivers/watchdog/kempld_wdt.c @@ -35,7 +35,7 @@ #define KEMPLD_WDT_STAGE_TIMEOUT(x) (0x1b + (x) * 4) #define KEMPLD_WDT_STAGE_CFG(x) (0x18 + (x)) #define STAGE_CFG_GET_PRESCALER(x) (((x) & 0x30) >> 4) -#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x30) << 4) +#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x3) << 4) #define STAGE_CFG_PRESCALER_MASK 0x30 #define STAGE_CFG_ACTION_MASK 0x7 #define STAGE_CFG_ASSERT (1 << 3) From 1d5898b4f8a0f6e231546d30dd54f6f9b89c232c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 5 Oct 2013 16:20:17 +0200 Subject: [PATCH 115/125] watchdog: sunxi: Fix section mismatch This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: Maxime Ripard Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sunxi_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c index 1f94b42764aa..f6caa77151c7 100644 --- a/drivers/watchdog/sunxi_wdt.c +++ b/drivers/watchdog/sunxi_wdt.c @@ -146,7 +146,7 @@ static const struct watchdog_ops sunxi_wdt_ops = { .set_timeout = sunxi_wdt_set_timeout, }; -static int __init sunxi_wdt_probe(struct platform_device *pdev) +static int sunxi_wdt_probe(struct platform_device *pdev) { struct sunxi_wdt_dev *sunxi_wdt; struct resource *res; @@ -187,7 +187,7 @@ static int __init sunxi_wdt_probe(struct platform_device *pdev) return 0; } -static int __exit sunxi_wdt_remove(struct platform_device *pdev) +static int sunxi_wdt_remove(struct platform_device *pdev) { struct sunxi_wdt_dev *sunxi_wdt = platform_get_drvdata(pdev); From 61e6cfa80de5760bbe406f4e815b7739205754d2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 13 Oct 2013 15:41:28 -0700 Subject: [PATCH 116/125] Linux 3.12-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 9de9aba21bf9..deec08b7612b 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 12 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = One Giant Leap for Frogkind # *DOCUMENTATION* From 6b2978ac40e414f984904fd53f6599d9eaf56407 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 14 Oct 2013 11:31:42 -0700 Subject: [PATCH 117/125] ARM: dts: Shared file for omap GPMC connected smsc911x Looks like at least Igep, Zoom and EVM boards can use a common file for the GPMC connected smsc911x. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi | 52 +++++++++++++++++++++++ arch/arm/boot/dts/omap3-igep0020.dts | 45 +------------------- 2 files changed, 54 insertions(+), 43 deletions(-) create mode 100644 arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi new file mode 100644 index 000000000000..9c18adf788f7 --- /dev/null +++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi @@ -0,0 +1,52 @@ +/* + * Common file for GPMC connected smsc911x on omaps + * + * Note that the board specifc DTS file needs to specify + * ranges, pinctrl, reg, interrupt parent and interrupts. + */ + +/ { + vddvario: regulator-vddvario { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; +}; + +&gpmc { + ethernet@gpmc { + compatible = "smsc,lan9221", "smsc,lan9115"; + bank-width = <2>; + gpmc,mux-add-data; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <186>; + gpmc,cs-wr-off-ns = <186>; + gpmc,adv-on-ns = <12>; + gpmc,adv-rd-off-ns = <48>; + gpmc,adv-wr-off-ns = <48>; + gpmc,oe-on-ns = <54>; + gpmc,oe-off-ns = <168>; + gpmc,we-on-ns = <54>; + gpmc,we-off-ns = <168>; + gpmc,rd-cycle-ns = <186>; + gpmc,wr-cycle-ns = <186>; + gpmc,access-ns = <114>; + gpmc,page-burst-access-ns = <6>; + gpmc,bus-turnaround-ns = <12>; + gpmc,cycle2cycle-delay-ns = <18>; + gpmc,wr-data-mux-bus-ns = <90>; + gpmc,wr-access-ns = <186>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + vmmc-supply = <&vddvario>; + vmmc_aux-supply = <&vdd33a>; + reg-io-width = <4>; + smsc,save-mac-address; + }; +}; diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 750ce84fc195..d5cc79267250 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -10,6 +10,7 @@ */ #include "omap3-igep.dtsi" +#include "omap-gpmc-smsc911x.dtsi" / { model = "IGEPv2"; @@ -44,18 +45,6 @@ }; }; - vddvario: regulator-vddvario { - compatible = "regulator-fixed"; - regulator-name = "vddvario"; - regulator-always-on; - }; - - vdd33a: regulator-vdd33a { - compatible = "regulator-fixed"; - regulator-name = "vdd33a"; - regulator-always-on; - }; - /* HS USB Port 1 Power */ hsusb1_power: hsusb1_power_reg { compatible = "regulator-fixed"; @@ -169,42 +158,12 @@ }; }; - ethernet@5,0 { + ethernet@gpmc { pinctrl-names = "default"; pinctrl-0 = <&smsc911x_pins>; - compatible = "smsc,lan9221", "smsc,lan9115"; reg = <5 0 0xff>; - bank-width = <2>; - - gpmc,mux-add-data; - gpmc,cs-on-ns = <0>; - gpmc,cs-rd-off-ns = <186>; - gpmc,cs-wr-off-ns = <186>; - gpmc,adv-on-ns = <12>; - gpmc,adv-rd-off-ns = <48>; - gpmc,adv-wr-off-ns = <48>; - gpmc,oe-on-ns = <54>; - gpmc,oe-off-ns = <168>; - gpmc,we-on-ns = <54>; - gpmc,we-off-ns = <168>; - gpmc,rd-cycle-ns = <186>; - gpmc,wr-cycle-ns = <186>; - gpmc,access-ns = <114>; - gpmc,page-burst-access-ns = <6>; - gpmc,bus-turnaround-ns = <12>; - gpmc,cycle2cycle-delay-ns = <18>; - gpmc,wr-data-mux-bus-ns = <90>; - gpmc,wr-access-ns = <186>; - gpmc,cycle2cycle-samecsen; - gpmc,cycle2cycle-diffcsen; - interrupt-parent = <&gpio6>; interrupts = <16 IRQ_TYPE_LEVEL_LOW>; - vmmc-supply = <&vddvario>; - vmmc_aux-supply = <&vdd33a>; - reg-io-width = <4>; - - smsc,save-mac-address; }; }; From 465ce68b467e5e47d699564432dff8cb60204433 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 14 Oct 2013 11:31:42 -0700 Subject: [PATCH 118/125] ARM: dts: Add common support for omap3-evm Looks like the main difference between the TMDSEVM3530 and TMDSEVM3730 is just the omap processor: http://www.ti.com/tool/tmdsevm3530 http://www.ti.com/tool/tmdsevm3730 So let's add a common file for the EVMs, and fix the description for the omap3-evm.dst as that's clearly for the TMDSEVM3530 since it includes omap34xx.dtsi. It cannot support the TMDSEVM3730 properly, and we need a separate file for that in the following patch. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-evm-common.dtsi | 60 +++++++++++++++++++++++++ arch/arm/boot/dts/omap3-evm.dts | 58 +----------------------- 2 files changed, 62 insertions(+), 56 deletions(-) create mode 100644 arch/arm/boot/dts/omap3-evm-common.dtsi diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi new file mode 100644 index 000000000000..75753bb28535 --- /dev/null +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -0,0 +1,60 @@ +/* + * Common support for omap3 EVM boards + */ + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" +#include "twl4030_omap3.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&twl_gpio { + ti,use-leds; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 7d4329d179c4..e10dcd0fa539 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -8,68 +8,14 @@ /dts-v1/; #include "omap34xx.dtsi" +#include "omap3-evm-common.dtsi" / { - model = "TI OMAP3 EVM (OMAP3530, AM/DM37x)"; + model = "TI OMAP35XX EVM (TMDSEVM3530)"; compatible = "ti,omap3-evm", "ti,omap3"; - cpus { - cpu@0 { - cpu0-supply = <&vcc>; - }; - }; - memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; - - leds { - compatible = "gpio-leds"; - ledb { - label = "omap3evm::ledb"; - gpios = <&twl_gpio 19 GPIO_ACTIVE_HIGH>; /* LEDB */ - linux,default-trigger = "default-on"; - }; - }; -}; - -&i2c1 { - clock-frequency = <2600000>; - - twl: twl@48 { - reg = <0x48>; - interrupts = <7>; /* SYS_NIRQ cascaded to intc */ - interrupt-parent = <&intc>; - }; -}; - -#include "twl4030.dtsi" -#include "twl4030_omap3.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <400000>; - - /* - * TVP5146 Video decoder-in for analog input support. - */ - tvp5146@5c { - compatible = "ti,tvp5146m2"; - reg = <0x5c>; - }; -}; - -&twl_gpio { - ti,use-leds; -}; - -&usb_otg_hs { - interface-type = <0>; - usb-phy = <&usb2_phy>; - mode = <3>; - power = <50>; }; From 5992234bc5f34f3069d0457090d87865ec31fe13 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 14 Oct 2013 11:31:43 -0700 Subject: [PATCH 119/125] ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM) I've tested the serial, MMC, smsc911x, wl12xx, and off-idle support with the pinctrl patches, so it probably works better than the board-*.c files ever did. Also the board-omap3evm.c file is broken for the DSS, and has been for a while. Patches are welcome to fix it in this .dts file, let's just drop the board-*.c file for this. Note that off-idle currently requires doing request_irq() on the wake-up pin from pinctrl-single IRQ domain until we can handle that in some Linux generic way. [tony@atomide.com: updated for make dtbs build fix] Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap3-evm-37xx.dts | 151 ++++++++++++++++++++++++ arch/arm/boot/dts/omap3-evm-common.dtsi | 34 ++++++ 3 files changed, 186 insertions(+) create mode 100644 arch/arm/boot/dts/omap3-evm-37xx.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 9df7d2c15e7d..96d8f1f50430 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -172,6 +172,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-devkit8000.dtb \ omap3-beagle-xm.dtb \ omap3-evm.dtb \ + omap3-evm-37xx.dtb \ omap3-n900.dtb \ omap3-tobi.dtb \ omap3-gta04.dtb \ diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts new file mode 100644 index 000000000000..4df68ad3736a --- /dev/null +++ b/arch/arm/boot/dts/omap3-evm-37xx.dts @@ -0,0 +1,151 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap3-evm-common.dtsi" + + +/ { + model = "TI OMAP37XX EVM (TMDSEVM3730)"; + compatible = "ti,omap3-evm-37xx", "ti,omap36xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; + + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + }; +}; + +&omap3_pmx_core { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + 0x120 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat4.sdmmc1_dat4 */ + 0x122 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat5.sdmmc1_dat5 */ + 0x124 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat6.sdmmc1_dat6 */ + 0x126 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat7.sdmmc1_dat7 */ + >; + }; + + /* NOTE: Clocked externally, needs INPUT also for sdmmc2_clk.sdmmc2_clk */ + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0x150 (PIN_OUTPUT | MUX_MODE4) /* uart1_cts.gpio_150 */ + 0x14e (PIN_INPUT | MUX_MODE4) /* uart1_rts.gpio_149 */ + >; + }; + + smsc911x_pins: pinmux_smsc911x_pins { + pinctrl-single,pins = < + 0x1a2 (PIN_INPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */ + >; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; + +&mmc3 { + status = "disabled"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x20000000>, + <5 0 0x2c000000 0x01000000>; + + nand@0,0 { + linux,mtd-name= "hynix,h8kds0un0mer-4em"; + reg = <0 0 0>; + nand-bus-width = <16>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "X-Loader"; + reg = <0 0x80000>; + }; + partition@0x80000 { + label = "U-Boot"; + reg = <0x80000 0x1c0000>; + }; + partition@0x1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; + }; + partition@0x280000 { + label = "Kernel"; + reg = <0x280000 0x500000>; + }; + partition@0x780000 { + label = "Filesystem"; + reg = <0x780000 0x1f880000>; + }; + }; + + ethernet@gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&smsc911x_pins>; + }; +}; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index 75753bb28535..b5493296d103 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -2,6 +2,8 @@ * Common support for omap3 EVM boards */ +#include "omap-gpmc-smsc911x.dtsi" + / { cpus { cpu@0 { @@ -17,6 +19,17 @@ linux,default-trigger = "default-on"; }; }; + + wl12xx_vmmc: wl12xx_vmmc { + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 22 0>; /* gpio150 */ + startup-delay-us = <70000>; + enable-active-high; + vin-supply = <&vmmc2>; + }; }; &i2c1 { @@ -48,6 +61,19 @@ }; }; +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <8>; +}; + +&mmc2 { + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; +}; + &twl_gpio { ti,use-leds; }; @@ -58,3 +84,11 @@ mode = <3>; power = <50>; }; + +&gpmc { + ethernet@gpmc { + interrupt-parent = <&gpio6>; + interrupts = <16 8>; + reg = <5 0 0xff>; + }; +}; From c482525659effc9fadc0cef88cffdb6f8c63d2b6 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 14 Oct 2013 11:31:43 -0700 Subject: [PATCH 120/125] ARM: dts: Add basic support for zoom3 I've tested serial, MMC, smsc911x and wl12xx on zoom3. As my omap is an early ES revision, I have not been able to test off-idle on this one. But anyways, I'd say we have enough device tree support for the zoom to be able to drop the board-zoom files. Patches are welcome to add further features to this .dts file. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap-zoom-common.dtsi | 33 ++++ arch/arm/boot/dts/omap3-zoom3.dts | 217 ++++++++++++++++++++++++ 3 files changed, 251 insertions(+) create mode 100644 arch/arm/boot/dts/omap-zoom-common.dtsi create mode 100644 arch/arm/boot/dts/omap3-zoom3.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 96d8f1f50430..841cd634d95d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -178,6 +178,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-gta04.dtb \ omap3-igep0020.dtb \ omap3-igep0030.dtb \ + omap3-zoom3.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ omap4-panda-es.dtb \ diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi new file mode 100644 index 000000000000..b0ee342598f0 --- /dev/null +++ b/arch/arm/boot/dts/omap-zoom-common.dtsi @@ -0,0 +1,33 @@ +/* + * Common features on the Zoom debug board + */ + +#include "omap-gpmc-smsc911x.dtsi" + +&gpmc { + ranges = <3 0 0x10000000 0x00000400>, + <7 0 0x2c000000 0x01000000>; + + /* + * Four port TL16CP754C serial port on GPMC, + * they probably share the same GPIO IRQ + * REVISIT: Add timing support from slls644g.pdf + */ + 8250@3,0 { + compatible = "ns16550a"; + reg = <3 0 0x100>; + bank-width = <2>; + reg-shift = <1>; + reg-io-width = <1>; + interrupt-parent = <&gpio4>; + interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */ + clock-frequency = <1843200>; + current-speed = <115200>; + }; + + ethernet@gpmc { + reg = <7 0 0xff>; + interrupt-parent = <&gpio5>; + interrupts = <30 IRQ_TYPE_LEVEL_LOW>; /* gpio158 */ + }; +}; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts new file mode 100644 index 000000000000..15eb9fe5169c --- /dev/null +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -0,0 +1,217 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap36xx.dtsi" +#include "omap-zoom-common.dtsi" + +/ { + model = "TI Zoom3"; + compatible = "ti,omap3-zoom3", "ti,omap36xx", "ti,omap3"; + + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + vddvario: regulator-vddvario { + compatible = "regulator-fixed"; + regulator-name = "vddvario"; + regulator-always-on; + }; + + vdd33a: regulator-vdd33a { + compatible = "regulator-fixed"; + regulator-name = "vdd33a"; + regulator-always-on; + }; + + wl12xx_vmmc: wl12xx_vmmc { + pinctrl-names = "default"; + pinctrl-0 = <&wl12xx_gpio>; + compatible = "regulator-fixed"; + regulator-name = "vwl1271"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio4 5 0>; /* gpio101 */ + startup-delay-us = <70000>; + enable-active-high; + }; +}; + +&omap3_pmx_core { + /* REVISIT: twl gpio0 is mmc0_cd */ + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x114 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + 0x116 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + >; + }; + + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + 0x12c (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + 0x12e (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + 0x130 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + 0x132 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + 0x134 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat4.sdmmc2_dat4 */ + 0x136 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat5.sdmmc2_dat5 */ + 0x138 (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat6.sdmmc2_dat6 */ + 0x13a (PIN_INPUT | MUX_MODE0) /* sdmmc2_dat7.sdmmc2_dat7 */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + 0x168 (PIN_INPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 WLAN IRQ */ + 0x1a0 (PIN_INPUT_PULLUP | MUX_MODE3) /* mcspi1_cs1.sdmmc3_cmd */ + 0x5a8 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_clk.sdmmc3_clk */ + 0x5b4 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d4.sdmmc3_dat0 */ + 0x5b6 (WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d5.sdmmc3_dat1 */ + 0x5b8 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d6.sdmmc3_dat2 */ + 0x5b2 (PIN_INPUT_PULLUP | MUX_MODE2) /* etk_d3.sdmmc3_dat3 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT | MUX_MODE0) /* uart1_cts.uart1_cts */ + 0x14e (PIN_OUTPUT | MUX_MODE0) /* uart1_rts.uart1_rts */ + 0x152 (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + 0x14c (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ + >; + }; + + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0x144 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts.uart2_cts */ + 0x146 (PIN_OUTPUT | MUX_MODE0) /* uart2_rts.uart2_rts */ + 0x14a (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ + 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x16a (PIN_INPUT_PULLDOWN | MUX_MODE0) /* uart3_cts_rctx.uart3_cts_rctx */ + 0x16c (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_sd.uart3_rts_sd */ + 0x16e (WAKEUP_EN | PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; + + /* wl12xx GPIO output for WLAN_EN */ + wl12xx_gpio: pinmux_wl12xx_gpio { + pinctrl-single,pins = < + 0xea (PIN_OUTPUT| MUX_MODE4) /* cam_d2.gpio_101 */ + >; + }; +}; + +&omap3_pmx_wkup { + wlan_host_wkup: pinmux_wlan_host_wkup_pins { + pinctrl-single,pins = < + 0x1a (PIN_INPUT_PULLUP | MUX_MODE4) /* sys_clkout1.gpio_10 WLAN_HOST_WKUP */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +#include "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; + +&twl_gpio { + ti,use-leds; +}; + +&mmc1 { + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; +}; +/* +&mmc2 { + vmmc-supply = <&vmmc2>; + ti,non-removable; + bus-width = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; +}; +*/ +&mmc3 { + vmmc-supply = <&wl12xx_vmmc>; + non-removable; + bus-width = <4>; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + status = "disabled"; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + mode = <3>; + power = <50>; +}; From df01318850d5c687533c6e2460d1df65944d0d4b Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Tue, 15 Oct 2013 23:36:09 +0300 Subject: [PATCH 121/125] ARM: dts: add minimal DT support for Nokia N950 & N9 phones Add minimal DT support for Nokia N950 & N9 phones. The same functionality that is provided by the current board file should work: serial console, USB, OneNAND and MMC. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/omap3-n9.dts | 18 +++ arch/arm/boot/dts/omap3-n950-n9.dtsi | 174 +++++++++++++++++++++++++++ arch/arm/boot/dts/omap3-n950.dts | 18 +++ 4 files changed, 212 insertions(+) create mode 100644 arch/arm/boot/dts/omap3-n9.dts create mode 100644 arch/arm/boot/dts/omap3-n950-n9.dtsi create mode 100644 arch/arm/boot/dts/omap3-n950.dts diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 841cd634d95d..e3a8f226bf52 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -174,6 +174,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-evm.dtb \ omap3-evm-37xx.dtb \ omap3-n900.dtb \ + omap3-n9.dtb \ + omap3-n950.dtb \ omap3-tobi.dtb \ omap3-gta04.dtb \ omap3-igep0020.dtb \ diff --git a/arch/arm/boot/dts/omap3-n9.dts b/arch/arm/boot/dts/omap3-n9.dts new file mode 100644 index 000000000000..39828ce464ee --- /dev/null +++ b/arch/arm/boot/dts/omap3-n9.dts @@ -0,0 +1,18 @@ +/* + * omap3-n9.dts - Device Tree file for Nokia N9 + * + * Written by: Aaro Koskinen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap3-n950-n9.dtsi" + +/ { + model = "Nokia N9"; + compatible = "nokia,omap3-n9", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi new file mode 100644 index 000000000000..94eb77d3b9dd --- /dev/null +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -0,0 +1,174 @@ +/* + * omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff) + * + * Written by: Aaro Koskinen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "omap36xx.dtsi" + +/ { + cpus { + cpu@0 { + cpu0-supply = <&vcc>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vemmc: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VEMMC"; + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + gpio = <&gpio5 29 0>; /* gpio line 157 */ + startup-delay-us = <150>; + enable-active-high; + }; +}; + +&omap3_pmx_core { + mmc2_pins: pinmux_mmc2_pins { + pinctrl-single,pins = < + 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */ + 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */ + 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */ + 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <2900000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&twl { + compatible = "ti,twl5031"; +}; + +&twl_gpio { + ti,pullups = <0x000001>; /* BIT(0) */ + ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */ +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; + +&mmc1 { + status = "disabled"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <&vemmc>; + bus-width = <4>; + ti,non-removable; +}; + +&mmc3 { + status = "disabled"; +}; + +&usb_otg_hs { + interface-type = <0>; + usb-phy = <&usb2_phy>; + phys = <&usb2_phy>; + phy-names = "usb2-phy"; + mode = <3>; + power = <50>; +}; + +&gpmc { + ranges = <0 0 0x04000000 0x20000000>; + + onenand@0,0 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0 0x20000000>; + + gpmc,sync-read; + gpmc,sync-write; + gpmc,burst-length = <16>; + gpmc,burst-read; + gpmc,burst-wrap; + gpmc,burst-write; + gpmc,device-width = <2>; + gpmc,mux-add-data = <2>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <87>; + gpmc,cs-wr-off-ns = <87>; + gpmc,adv-on-ns = <0>; + gpmc,adv-rd-off-ns = <10>; + gpmc,adv-wr-off-ns = <10>; + gpmc,oe-on-ns = <15>; + gpmc,oe-off-ns = <87>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <87>; + gpmc,rd-cycle-ns = <112>; + gpmc,wr-cycle-ns = <112>; + gpmc,access-ns = <81>; + gpmc,page-burst-access-ns = <15>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,clk-activation-ns = <5>; + gpmc,wr-data-mux-bus-ns = <30>; + gpmc,wr-access-ns = <81>; + gpmc,sync-clk-ps = <15000>; + + /* + * MTD partition table corresponding to Nokia's MeeGo 1.2 + * Harmattan release. + */ + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00100000>; + }; + partition@1 { + label = "config"; + reg = <0x00100000 0x002c0000>; + }; + partition@2 { + label = "kernel"; + reg = <0x003c0000 0x01000000>; + }; + partition@3 { + label = "log"; + reg = <0x013c0000 0x00200000>; + }; + partition@4 { + label = "var"; + reg = <0x015c0000 0x1ca40000>; + }; + partition@5 { + label = "moslo"; + reg = <0x1e000000 0x02000000>; + }; + partition@6 { + label = "omap2-onenand"; + reg = <0x00000000 0x20000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts new file mode 100644 index 000000000000..b076a526b999 --- /dev/null +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -0,0 +1,18 @@ +/* + * omap3-n950.dts - Device Tree file for Nokia N950 + * + * Written by: Aaro Koskinen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include "omap3-n950-n9.dtsi" + +/ { + model = "Nokia N950"; + compatible = "nokia,omap3-n950", "ti,omap3"; +}; From dfcc11ad4a4e620440475e25cf75d10c9d3bf7c2 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Mon, 14 Oct 2013 11:30:45 -0700 Subject: [PATCH 122/125] ARM: OMAP2: delete board-rm680 Delete board file for Nokia RM-680/RM-696 (N950/N9). DT-based booting should be used for further development on this HW. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 7 -- arch/arm/mach-omap2/Makefile | 1 - arch/arm/mach-omap2/board-rm680.c | 167 ------------------------------ 3 files changed, 175 deletions(-) delete mode 100644 arch/arm/mach-omap2/board-rm680.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index f6a1db112168..6850bf9f8f18 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -310,13 +310,6 @@ config MACH_NOKIA_N8X0 select MACH_NOKIA_N810_WIMAX select OMAP_PACKAGE_ZAC -config MACH_NOKIA_RM680 - bool "Nokia N950 (RM-680) / N9 (RM-696) phones" - depends on ARCH_OMAP3 - default y - select MACH_NOKIA_RM696 - select OMAP_PACKAGE_CBB - config MACH_NOKIA_RX51 bool "Nokia N900 (RX-51) phone" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f8d4a1b83864..1d2917b16a96 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o -obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c deleted file mode 100644 index 345e8c4b8731..000000000000 --- a/arch/arm/mach-omap2/board-rm680.c +++ /dev/null @@ -1,167 +0,0 @@ -/* - * Board support file for Nokia N950 (RM-680) / N9 (RM-696). - * - * Copyright (C) 2010 Nokia - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include "common.h" -#include "mux.h" -#include "gpmc.h" -#include "mmc.h" -#include "hsmmc.h" -#include "sdram-nokia.h" -#include "common-board-devices.h" -#include "gpmc-onenand.h" - -static struct regulator_consumer_supply rm680_vemmc_consumers[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -/* Fixed regulator for internal eMMC */ -static struct regulator_init_data rm680_vemmc = { - .constraints = { - .name = "rm680_vemmc", - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_STATUS - | REGULATOR_CHANGE_MODE, - }, - .num_consumer_supplies = ARRAY_SIZE(rm680_vemmc_consumers), - .consumer_supplies = rm680_vemmc_consumers, -}; - -static struct fixed_voltage_config rm680_vemmc_config = { - .supply_name = "VEMMC", - .microvolts = 2900000, - .gpio = 157, - .startup_delay = 150, - .enable_high = 1, - .init_data = &rm680_vemmc, -}; - -static struct platform_device rm680_vemmc_device = { - .name = "reg-fixed-voltage", - .dev = { - .platform_data = &rm680_vemmc_config, - }, -}; - -static struct platform_device *rm680_peripherals_devices[] __initdata = { - &rm680_vemmc_device, -}; - -/* TWL */ -static struct twl4030_gpio_platform_data rm680_gpio_data = { - .pullups = BIT(0), - .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15), -}; - -static struct twl4030_platform_data rm680_twl_data = { - .gpio = &rm680_gpio_data, - /* add rest of the children here */ -}; - -static void __init rm680_i2c_init(void) -{ - omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0); - omap_pmic_init(1, 2900, "twl5031", 7 + OMAP_INTC_START, &rm680_twl_data); - omap_register_i2c_bus(2, 400, NULL, 0); - omap_register_i2c_bus(3, 400, NULL, 0); -} - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) -static struct omap_onenand_platform_data board_onenand_data[] = { - { - .gpio_irq = 65, - .flags = ONENAND_SYNC_READWRITE, - } -}; -#endif - -/* eMMC */ -static struct omap2_hsmmc_info mmc[] __initdata = { - { - .name = "internal", - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, - { /* Terminator */ } -}; - -static void __init rm680_peripherals_init(void) -{ - platform_add_devices(rm680_peripherals_devices, - ARRAY_SIZE(rm680_peripherals_devices)); - rm680_i2c_init(); - gpmc_onenand_init(board_onenand_data); - omap_hsmmc_init(mmc); -} - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init rm680_init(void) -{ - struct omap_sdrc_params *sdrc_params; - - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_serial_init(); - - sdrc_params = nokia_get_sdram_timings(); - omap_sdrc_init(sdrc_params, sdrc_params); - - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - rm680_peripherals_init(); -} - -MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = rm680_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(NOKIA_RM696, "Nokia RM-696 board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap3630_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = rm680_init, - .init_late = omap3630_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END From 95807689eab8441737572d1a9daaa1025429a908 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 14 Oct 2013 11:31:43 -0700 Subject: [PATCH 123/125] ARM: OMAP2+: Remove legacy booting support for omap3 EVM We now have pretty decent support with the device tree based booting. Patches to add more features are welcome. Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 6 - arch/arm/mach-omap2/Makefile | 1 - arch/arm/mach-omap2/board-omap3evm.c | 756 --------------------------- 3 files changed, 763 deletions(-) delete mode 100644 arch/arm/mach-omap2/board-omap3evm.c diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 6850bf9f8f18..fbd730d895cf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -256,12 +256,6 @@ config MACH_OVERO default y select OMAP_PACKAGE_CBB -config MACH_OMAP3EVM - bool "OMAP 3530 EVM board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - config MACH_OMAP3517EVM bool "OMAP3517/ AM3517 EVM board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 1d2917b16a96..f8db40d1f1c2 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -242,7 +242,6 @@ obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o obj-$(CONFIG_MACH_OMAP3530_LV_SOM) += board-omap3logic.o obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o obj-$(CONFIG_MACH_OVERO) += board-overo.o -obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c deleted file mode 100644 index 18143873346c..000000000000 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ /dev/null @@ -1,756 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/board-omap3evm.c - * - * Copyright (C) 2008 Texas Instruments - * - * Modified from mach-omap2/board-3430sdp.c - * - * Initial code: Syed Mohammed Khasim - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include "common.h" -#include -#include