UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

spi: atmel-quadspi: Avoid overwriting delay register settings 

[ Upstream commit 329ca3eed4a9a161515a8714be6ba182321385c7 ]

Previously the MR and SCR registers were just set with the supposedly
required values, from cached register values (cached reg content
initialized to zero).

All parts fixed here did not consider the current register (cache)
content, which would make future support of cs_setup, cs_hold, and
cs_inactive impossible.

Setting SCBR in atmel_qspi_setup() erases a possible DLYBS setting from
atmel_qspi_set_cs_timing().  The DLYBS setting is applied by ORing over
the current setting, without resetting the bits first.  All writes to MR
did not consider possible settings of DLYCS and DLYBCT.

Signed-off-by: Alexander Dahl <ada@thorsis.com>
Fixes: f732646d0c ("spi: atmel-quadspi: Add support for configuring CS timing")
Link: https://patch.msgid.link/20240918082744.379610-2-ada@thorsis.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Alexander Dahl 2024-09-18 10:27:43 +02:00 committed by Greg Kroah-Hartman
parent 54fd87259c
commit ecb8a79d21
1 changed files with 8 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
drivers/spi/atmel-quadspi.c
View File

@ -375,9 +375,9 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
* If the QSPI controller is set in regular SPI mode, set it in
* Serial Memory Mode (SMM).
*/
if (aq->mr != QSPI_MR_SMM) {
atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR);
aq->mr = QSPI_MR_SMM;
if (!(aq->mr & QSPI_MR_SMM)) {
aq->mr |= QSPI_MR_SMM;
atmel_qspi_write(aq->scr, aq, QSPI_MR);
}
/* Clear pending interrupts */
@ -501,7 +501,8 @@ static int atmel_qspi_setup(struct spi_device *spi)
if (ret < 0)
return ret;
aq->scr = QSPI_SCR_SCBR(scbr);
aq->scr &= ~QSPI_SCR_SCBR_MASK;
aq->scr |= QSPI_SCR_SCBR(scbr);
atmel_qspi_write(aq->scr, aq, QSPI_SCR);
pm_runtime_mark_last_busy(ctrl->dev.parent);
@ -534,6 +535,7 @@ static int atmel_qspi_set_cs_timing(struct spi_device *spi)
if (ret < 0)
return ret;
aq->scr &= ~QSPI_SCR_DLYBS_MASK;
aq->scr |= QSPI_SCR_DLYBS(cs_setup);
atmel_qspi_write(aq->scr, aq, QSPI_SCR);
@ -549,8 +551,8 @@ static void atmel_qspi_init(struct atmel_qspi *aq)
atmel_qspi_write(QSPI_CR_SWRST, aq, QSPI_CR);
/* Set the QSPI controller by default in Serial Memory Mode */
atmel_qspi_write(QSPI_MR_SMM, aq, QSPI_MR);
aq->mr = QSPI_MR_SMM;
aq->mr |= QSPI_MR_SMM;
atmel_qspi_write(aq->mr, aq, QSPI_MR);
/* Enable the QSPI controller */
atmel_qspi_write(QSPI_CR_QSPIEN, aq, QSPI_CR);