UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: dts: sun8i: a23/a33: Remove all useless pinctrl nodes 

The gpio pinctrl nodes are redundant and as such useless most of the times.
Since they will also generate warnings in DTC, we can simply remove most of
them.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
This commit is contained in:
Maxime Ripard 2018-11-07 11:14:15 +01:00
parent dac89fd278
commit ec6b944c5a
No known key found for this signature in database
GPG Key ID: E3EF0D6F671851C5
4 changed files with 1 additions and 47 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
arch/arm/boot/dts/sun8i-a23-polaroid-mid2407pxe03.dts
View File

@ -54,8 +54,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwrseq_pin_mid2407>;
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
post-power-on-delay-ms = <200>;
@ -85,13 +83,6 @@
};
};
&r_pio {
wifi_pwrseq_pin_mid2407: wifi_pwrseq_pin@0 {
pins = "PL6";
function = "gpio_out";
};
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl1680";

9
arch/arm/boot/dts/sun8i-a23-polaroid-mid2809pxe04.dts
View File

@ -54,8 +54,6 @@
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
pinctrl-0 = <&wifi_pwrseq_pin_mid2809>;
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
/* The esp8089 needs 200 ms after driving wifi-en high */
post-power-on-delay-ms = <200>;
@ -78,13 +76,6 @@
};
};
&r_pio {
wifi_pwrseq_pin_mid2809: wifi_pwrseq_pin@0 {
pins = "PL6";
function = "gpio_out";
};
};
&touchscreen {
reg = <0x40>;
compatible = "silead,gsl3670";

23
arch/arm/boot/dts/sun8i-r16-parrot.dts
View File

@ -63,8 +63,6 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins_parrot>;
led1 {
label = "parrot:led1:usr";
@ -138,7 +136,7 @@
&mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;
pinctrl-0 = <&mmc1_pins_a>;
vmmc-supply = <&reg_aldo1>;
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
@ -171,28 +169,11 @@
bias-pull-up;
};
led_pins_parrot: led_pins@0 {
pins = "PE16", "PE17";
function = "gpio_out";
};
usb0_id_det: usb0_id_detect_pin@0 {
pins = "PD10";
function = "gpio_in";
bias-pull-up;
};
usb1_vbus_pin_parrot: usb1_vbus_pin@0 {
pins = "PD12";
function = "gpio_out";
};
};
&r_pio {
wifi_reset_pin_parrot: wifi_reset_pin@0 {
pins = "PL6";
function = "gpio_out";
};
};
&r_rsb {
@ -318,8 +299,6 @@
};
&reg_usb1_vbus {
pinctrl-names = "default";
pinctrl-0 = <&usb1_vbus_pin_parrot>;
gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */
status = "okay";
};

7
arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
View File

@ -73,8 +73,6 @@
reg = <0x40>;
interrupt-parent = <&pio>;
interrupts = <1 5 IRQ_TYPE_EDGE_FALLING>; /* PB5 */
pinctrl-names = "default";
pinctrl-0 = <&ts_power_pin>;
power-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
/* Tablet dts must provide reg and compatible */
status = "disabled";
@ -97,11 +95,6 @@
bias-pull-up;
};
ts_power_pin: ts_power_pin@0 {
pins = "PH1";
function = "gpio_out";
};
usb0_id_detect_pin: usb0_id_detect_pin@0 {
pins = "PH8";
function = "gpio_in";