From ec4c6c57af576e10c70547b782db04eb3602f5f4 Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Sun, 4 Nov 2018 16:50:34 -0500 Subject: [PATCH] ARM: dts: qcom: msm8974-hammerhead: add WiFi support This patch adds WiFi support to the LG Nexus 5 (hammerhead) phone. Signed-off-by: Jonathan Marek [masneyb@onstation.org: Enabled wlan_regulator_pin and wlan_sleep_clk_pin] Signed-off-by: Brian Masney Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- .../qcom-msm8974-lge-nexus5-hammerhead.dts | 70 +++++++++++++++++++ 1 file changed, 70 insertions(+) diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index 51444c53fc72..5cf9c7e20f2e 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -220,6 +220,20 @@ }; }; }; + + vreg_wlan: wlan-regulator { + compatible = "regulator-fixed"; + + regulator-name = "wl-reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&msmgpio 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_regulator_pin>; + }; }; &soc { @@ -242,6 +256,20 @@ }; }; + sdhc2_pin_a: sdhc2-pin-active { + clk { + pins = "sdc2_clk"; + drive-strength = <6>; + bias-disable; + }; + + cmd-data { + pins = "sdc2_cmd", "sdc2_data"; + drive-strength = <6>; + bias-pull-up; + }; + }; + i2c3_pins: i2c3 { mux { pins = "gpio10", "gpio11"; @@ -283,6 +311,32 @@ pinctrl-0 = <&sdhc1_pin_a>; }; + sdhci@f98a4900 { + status = "ok"; + + max-frequency = <100000000>; + bus-width = <4>; + non-removable; + vmmc-supply = <&vreg_wlan>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdhc2_pin_a>; + + #address-cells = <1>; + #size-cells = <0>; + + bcrmf@1 { + compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + + brcm,drive-strength = <10>; + + pinctrl-names = "default"; + pinctrl-0 = <&wlan_sleep_clk_pin>; + }; + }; + gpio-keys { compatible = "gpio-keys"; input-name = "gpio-keys"; @@ -371,6 +425,22 @@ bias-pull-up; power-source = ; }; + + wlan_sleep_clk_pin: wl-sleep-clk { + pins = "gpio16"; + function = "func2"; + + output-high; + power-source = ; + }; + + wlan_regulator_pin: wl-reg-active { + pins = "gpio17"; + function = "normal"; + + bias-disable; + power-source = ; + }; }; }; };