From ea662d2f804ad13c3c92c75c7dc1abad30e31c31 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Fri, 19 Oct 2018 01:05:36 +0000 Subject: [PATCH] clk: imx7d: remove UART1 clock setting There are clock assignments in all i.MX7D dtb files for UART1, below is the example in imx7d-sdb.dts, so setting UART1 clock in clock driver is NOT necessary, actually, module clocks setting should be done in module driver. &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>; assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>; status = "okay"; }; Signed-off-by: Anson Huang Signed-off-by: Stephen Boyd --- drivers/clk/imx/clk-imx7d.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c index adb08f64c691..06c105d580a4 100644 --- a/drivers/clk/imx/clk-imx7d.c +++ b/drivers/clk/imx/clk-imx7d.c @@ -886,9 +886,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node) /* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */ clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]); - /* set uart module clock's parent clock source that must be great then 80MHz */ - clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]); - /* Set clock rate for USBPHY, the USB_PLL at CCM is from USBOTG2 */ clks[IMX7D_USB1_MAIN_480M_CLK] = imx_clk_fixed_factor("pll_usb1_main_clk", "osc", 20, 1); clks[IMX7D_USB_MAIN_480M_CLK] = imx_clk_fixed_factor("pll_usb_main_clk", "osc", 20, 1);