Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "A few quirks for the Elan touchpad driver, another Thinkpad is being
  switched over from PS/2 to native RMI4 interface, and we gave a brand
  new SW_MACHINE_COVER switch definition"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: elan_i2c - add more hardware ID for Lenovo laptops
  Input: i8042 - add Lenovo XiaoXin Air 12 to i8042 nomux list
  Revert "Input: elants_i2c - report resolution information for touch major"
  Input: elan_i2c - only increment wakeup count on touch
  Input: synaptics - enable InterTouch for ThinkPad X1E 1st gen
  ARM: dts: n900: remove mmc1 card detect gpio
  Input: add `SW_MACHINE_COVER`

arch/arm/boot/dts/omap3-n900.dts

@@ -105,6 +105,14 @@
 			linux,code = <SW_FRONT_PROXIMITY>;
 			linux,can-disable;
 		};
+
+		machine_cover {
+			label = "Machine Cover";
+			gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_MACHINE_COVER>;
+			linux,can-disable;
+		};
 	};
 
 	isp1707: isp1707 {
@@ -819,10 +827,6 @@
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
-	/* For debugging, it is often good idea to remove this GPIO.
-	   It means you can remove back cover (to reboot by removing
-	   battery) and still use the MMC card. */
-	cd-gpios = <&gpio6 0 GPIO_ACTIVE_LOW>; /* 160 */
 };
 
 /* most boards use vaux3, only some old versions use vmmc2 instead */

drivers/input/mouse/elan_i2c_core.c

@@ -951,6 +951,8 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
 	u8 hover_info = packet[ETP_HOVER_INFO_OFFSET];
 	bool contact_valid, hover_event;
 
+	pm_wakeup_event(&data->client->dev, 0);
+
 	hover_event = hover_info & 0x40;
 	for (i = 0; i < ETP_MAX_FINGERS; i++) {
 		contact_valid = tp_info & (1U << (3 + i));
@@ -974,6 +976,8 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report)
 	u8 *packet = &report[ETP_REPORT_ID_OFFSET + 1];
 	int x, y;
 
+	pm_wakeup_event(&data->client->dev, 0);
+
 	if (!data->tp_input) {
 		dev_warn_once(&data->client->dev,
 			      "received a trackpoint report while no trackpoint device has been created. Please report upstream.\n");
@@ -998,7 +1002,6 @@ static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report)
 static irqreturn_t elan_isr(int irq, void *dev_id)
 {
 	struct elan_tp_data *data = dev_id;
-	struct device *dev = &data->client->dev;
 	int error;
 	u8 report[ETP_MAX_REPORT_LEN];
 
@@ -1016,8 +1019,6 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
 	if (error)
 		goto out;
 
-	pm_wakeup_event(dev, 0);
-
 	switch (report[ETP_REPORT_ID_OFFSET]) {
 	case ETP_REPORT_ID:
 		elan_report_absolute(data, report);
@@ -1026,7 +1027,7 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
 		elan_report_trackpoint(data, report);
 		break;
 	default:
-		dev_err(dev, "invalid report id data (%x)\n",
+		dev_err(&data->client->dev, "invalid report id data (%x)\n",
 			report[ETP_REPORT_ID_OFFSET]);
 	}
 

drivers/input/mouse/synaptics.c

@@ -179,6 +179,7 @@ static const char * const smbus_pnp_ids[] = {
 	"LEN0093", /* T480 */
 	"LEN0096", /* X280 */
 	"LEN0097", /* X280 -> ALPS trackpoint */
+	"LEN0099", /* X1 Extreme 1st */
 	"LEN009b", /* T580 */
 	"LEN200f", /* T450s */
 	"LEN2044", /* L470  */

drivers/input/serio/i8042-x86ia64io.h

@@ -425,6 +425,13 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
 		},
 	},
+	{
+		/* Lenovo XiaoXin Air 12 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "80UN"),
+		},
+	},
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),

drivers/input/touchscreen/elants_i2c.c

@@ -1325,7 +1325,6 @@ static int elants_i2c_probe(struct i2c_client *client,
 			     0, MT_TOOL_PALM, 0, 0);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
 	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
-	input_abs_set_res(ts->input, ABS_MT_TOUCH_MAJOR, 1);
 
 	touchscreen_parse_properties(ts->input, true, &ts->prop);
 

include/linux/input/elan-i2c-ids.h

@@ -67,8 +67,15 @@ static const struct acpi_device_id elan_acpi_id[] = {
 	{ "ELAN062B", 0 },
 	{ "ELAN062C", 0 },
 	{ "ELAN062D", 0 },
+	{ "ELAN062E", 0 }, /* Lenovo V340 Whiskey Lake U */
+	{ "ELAN062F", 0 }, /* Lenovo V340 Comet Lake U */
 	{ "ELAN0631", 0 },
 	{ "ELAN0632", 0 },
+	{ "ELAN0633", 0 }, /* Lenovo S145 */
+	{ "ELAN0634", 0 }, /* Lenovo V340 Ice lake */
+	{ "ELAN0635", 0 }, /* Lenovo V1415-IIL */
+	{ "ELAN0636", 0 }, /* Lenovo V1415-Dali */
+	{ "ELAN0637", 0 }, /* Lenovo V1415-IGLR */
 	{ "ELAN1000", 0 },
 	{ }
 };

include/linux/mod_devicetable.h

@@ -318,7 +318,7 @@ struct pcmcia_device_id {
 #define INPUT_DEVICE_ID_LED_MAX		0x0f
 #define INPUT_DEVICE_ID_SND_MAX		0x07
 #define INPUT_DEVICE_ID_FF_MAX		0x7f
-#define INPUT_DEVICE_ID_SW_MAX		0x0f
+#define INPUT_DEVICE_ID_SW_MAX		0x10
 #define INPUT_DEVICE_ID_PROP_MAX	0x1f
 
 #define INPUT_DEVICE_ID_MATCH_BUS	1

include/uapi/linux/input-event-codes.h

@@ -888,7 +888,8 @@
 #define SW_LINEIN_INSERT	0x0d  /* set = inserted */
 #define SW_MUTE_DEVICE		0x0e  /* set = device disabled */
 #define SW_PEN_INSERTED		0x0f  /* set = pen inserted */
-#define SW_MAX			0x0f
+#define SW_MACHINE_COVER	0x10  /* set = cover closed */
+#define SW_MAX			0x10
 #define SW_CNT			(SW_MAX+1)
 
 /*