ASoC: wm8904: fix regcache handling
The current code assumes that the power is turned off in SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't turned off and the registers are not reset to their default values but the regcache is still marked as dirty. Thus a value might not be written to the hardware if it is set to the default value. Do a software reset before turning off the power to make sure the registers are always reset to their default states. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
8f157d4ff0
commit
e9149b8c00
|
@ -1917,6 +1917,7 @@ static int wm8904_set_bias_level(struct snd_soc_component *component,
|
|||
snd_soc_component_update_bits(component, WM8904_BIAS_CONTROL_0,
|
||||
WM8904_BIAS_ENA, 0);
|
||||
|
||||
snd_soc_component_write(component, WM8904_SW_RESET_AND_ID, 0);
|
||||
regcache_cache_only(wm8904->regmap, true);
|
||||
regcache_mark_dirty(wm8904->regmap);
|
||||
|
||||
|
|
Loading…
Reference in New Issue