From e8f6f3b4d69956f66bba14a4d33aadf1fb209050 Mon Sep 17 00:00:00 2001 From: Christophe Ricard Date: Mon, 1 Dec 2014 19:32:56 +0100 Subject: [PATCH] tpm/tpm_i2c_stm_st33/dts/st33zp24_i2c: Add DTS Documentation st33zp24 tpm can be seen as a trivial i2c device as other i2c tpm. However several other properties needs to be documented such as lpcpd. Reviewed-by: Jason Gunthorpe Signed-off-by: Christophe Ricard Signed-off-by: Peter Huewe --- .../bindings/security/tpm/st33zp24.txt | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 Documentation/devicetree/bindings/security/tpm/st33zp24.txt diff --git a/Documentation/devicetree/bindings/security/tpm/st33zp24.txt b/Documentation/devicetree/bindings/security/tpm/st33zp24.txt new file mode 100644 index 000000000000..0a7361dae65f --- /dev/null +++ b/Documentation/devicetree/bindings/security/tpm/st33zp24.txt @@ -0,0 +1,36 @@ +* STMicroelectronics SAS. ST33ZP24 TPM SoC + +Required properties: +- compatible: Should be "st,st33zp24-i2c". +- clock-frequency: I²C work frequency. +- reg: address on the bus + +Optional ST33ZP24 Properties: +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- lpcpd-gpios: Output GPIO pin used for ST33ZP24 power management D1/D2 state. +If set, power must be present when the platform is going into sleep/hibernate mode. + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBoard xM with ST33ZP24 on I2C2): + +&i2c2 { + + status = "okay"; + + st33zp24: st33zp24@13 { + + compatible = "st,st33zp24-i2c"; + + reg = <0x013>; + clock-frequency = <400000>; + + interrupt-parent = <&gpio5>; + interrupts = <7 IRQ_TYPE_LEVEL_HIGH>; + + lpcpd-gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>; + }; +};