Merge branch 'net-sfp-small-improvements'

Antoine Tenart says:

====================
net: sfp: small improvements

A small series of patches improving the SFP support by adding a warning
when no Tx disable pin is available, and making the i2c-bus property
mandatory.

Thanks!
Antoine

Since v1:
  - Removed the patch fixing the sfp driver when no i2c bus was described.
  - Made two new patches to make the i2c-bus property mandatory for sfp modules.

Since the phylink series:
  - s/-EOPNOTSUPP/-ENODEV/ in patch 1/2.
  - I added the acked-by tag in patch 2/2.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
David S. Miller 2018-05-23 14:34:28 -04:00
commit e89e59c08d
2 changed files with 24 additions and 13 deletions

View File

@ -7,11 +7,11 @@ Required properties:
"sff,sfp" for SFP modules
"sff,sff" for soldered down SFF modules
Optional Properties:
- i2c-bus : phandle of an I2C bus controller for the SFP two wire serial
interface
Optional Properties:
- mod-def0-gpios : GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS)
module presence input gpio signal, active (module absent) high. Must
not be present for SFF modules

View File

@ -976,6 +976,7 @@ static int sfp_probe(struct platform_device *pdev)
if (pdev->dev.of_node) {
struct device_node *node = pdev->dev.of_node;
const struct of_device_id *id;
struct i2c_adapter *i2c;
struct device_node *np;
id = of_match_node(sfp_of_match, node);
@ -985,19 +986,20 @@ static int sfp_probe(struct platform_device *pdev)
sff = sfp->type = id->data;
np = of_parse_phandle(node, "i2c-bus", 0);
if (np) {
struct i2c_adapter *i2c;
if (!np) {
dev_err(sfp->dev, "missing 'i2c-bus' property\n");
return -ENODEV;
}
i2c = of_find_i2c_adapter_by_node(np);
of_node_put(np);
if (!i2c)
return -EPROBE_DEFER;
i2c = of_find_i2c_adapter_by_node(np);
of_node_put(np);
if (!i2c)
return -EPROBE_DEFER;
err = sfp_i2c_configure(sfp, i2c);
if (err < 0) {
i2c_put_adapter(i2c);
return err;
}
err = sfp_i2c_configure(sfp, i2c);
if (err < 0) {
i2c_put_adapter(i2c);
return err;
}
}
@ -1065,6 +1067,15 @@ static int sfp_probe(struct platform_device *pdev)
if (poll)
mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
/* We could have an issue in cases no Tx disable pin is available or
* wired as modules using a laser as their light source will continue to
* be active when the fiber is removed. This could be a safety issue and
* we should at least warn the user about that.
*/
if (!sfp->gpio[GPIO_TX_DISABLE])
dev_warn(sfp->dev,
"No tx_disable pin: SFP modules will always be emitting.\n");
return 0;
}